This affectively reverts commit 377ccbb483 ("Makefile: Mute warning
for __builtin_return_address(>0) for tracing only") because it turns out
that it really isn't tracing only - it's all over the tree.
We already also had the warning disabled separately for mm/usercopy.c
(which this commit also removes), and it turns out that we will also
want to disable it for get_lock_parent_ip(), that is used for at least
TRACE_IRQFLAGS. Which (when enabled) ends up being all over the tree.
Steven Rostedt had a patch that tried to limit it to just the config
options that actually triggered this, but quite frankly, the extra
complexity and abstraction just isn't worth it. We have never actually
had a case where the warning is actually useful, so let's just disable
it globally and not worry about it.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hardware latency tracer has been in the PREEMPT_RT patch for some time.
It is used to detect possible SMIs or any other hardware interruptions that
the kernel is unaware of. Note, NMIs may also be detected, but that may be
good to note as well.
The logic is pretty simple. It simply creates a thread that spins on a
single CPU for a specified amount of time (width) within a periodic window
(window). These numbers may be adjusted by their cooresponding names in
/sys/kernel/tracing/hwlat_detector/
The defaults are window = 1000000 us (1 second)
width = 500000 us (1/2 second)
The loop consists of:
t1 = trace_clock_local();
t2 = trace_clock_local();
Where trace_clock_local() is a variant of sched_clock().
The difference of t2 - t1 is recorded as the "inner" timestamp and also the
timestamp t1 - prev_t2 is recorded as the "outer" timestamp. If either of
these differences are greater than the time denoted in
/sys/kernel/tracing/tracing_thresh then it records the event.
When this tracer is started, and tracing_thresh is zero, it changes to the
default threshold of 10 us.
The hwlat tracer in the PREEMPT_RT patch was originally written by
Jon Masters. I have modified it quite a bit and turned it into a
tracer.
Based-on-code-by: Jon Masters <jcm@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the latest gcc compilers, they give a warning if
__builtin_return_address() parameter is greater than 0. That is because if
it is used by a function called by a top level function (or in the case of
the kernel, by assembly), it can try to access stack frames outside the
stack and crash the system.
The tracing system uses __builtin_return_address() of up to 2! But it is
well aware of the dangers that it may have, and has even added precautions
to protect against it (see the thunk code in arch/x86/entry/thunk*.S)
Linus originally added KBUILD_CFLAGS that would suppress the warning for the
entire kernel, as simply adding KBUILD_CFLAGS to the tracing directory
wouldn't work. The tracing directory plays a bit with the CFLAGS and
requires a little more logic.
This adds that special logic to only suppress the warning for the tracing
directory. If it is used anywhere else outside of tracing, the warning will
still be triggered.
Link: http://lkml.kernel.org/r/20160728223043.51996267@grimm.local.home
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
'hist' triggers allow users to continually aggregate trace events,
which can then be viewed afterwards by simply reading a 'hist' file
containing the aggregation in a human-readable format.
The basic idea is very simple and boils down to a mechanism whereby
trace events, rather than being exhaustively dumped in raw form and
viewed directly, are automatically 'compressed' into meaningful tables
completely defined by the user.
This is done strictly via single-line command-line commands and
without the aid of any kind of programming language or interpreter.
A surprising number of typical use cases can be accomplished by users
via this simple mechanism. In fact, a large number of the tasks that
users typically do using the more complicated script-based tracing
tools, at least during the initial stages of an investigation, can be
accomplished by simply specifying a set of keys and values to be used
in the creation of a hash table.
The Linux kernel trace event subsystem happens to provide an extensive
list of keys and values ready-made for such a purpose in the form of
the event format files associated with each trace event. By simply
consulting the format file for field names of interest and by plugging
them into the hist trigger command, users can create an endless number
of useful aggregations to help with investigating various properties
of the system. See Documentation/trace/events.txt for examples.
hist triggers are implemented on top of the existing event trigger
infrastructure, and as such are consistent with the existing triggers
from a user's perspective as well.
The basic syntax follows the existing trigger syntax. Users start an
aggregation by writing a 'hist' trigger to the event of interest's
trigger file:
# echo hist:keys=xxx [ if filter] > event/trigger
Once a hist trigger has been set up, by default it continually
aggregates every matching event into a hash table using the event key
and a value field named 'hitcount'.
To view the aggregation at any point in time, simply read the 'hist'
file in the same directory as the 'trigger' file:
# cat event/hist
The detailed syntax provides additional options for user control, and
is described exhaustively in Documentation/trace/events.txt and in the
virtual tracing/README file in the tracing subsystem.
Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add tracing_map, a special-purpose lock-free map for tracing.
tracing_map is designed to aggregate or 'sum' one or more values
associated with a specific object of type tracing_map_elt, which
is associated by the map to a given key.
It provides various hooks allowing per-tracer customization and is
separated out into a separate file in order to allow it to be shared
between multiple tracers, but isn't meant to be generally used outside
of that context.
The tracing_map implementation was inspired by lock-free map
algorithms originated by Dr. Cliff Click:
http://www.azulsystems.com/blog/cliff/2007-03-26-non-blocking-hashtablehttp://www.azulsystems.com/events/javaone_2007/2007_LockFreeHash.pdf
Link: http://lkml.kernel.org/r/b43d68d1add33582a396f553c8ef705a33a6a748.1449767187.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
So bpf_tracing.o depends on CONFIG_BPF_SYSCALL - but that's not its only
dependency, it also depends on the tracing infrastructure and on kprobes,
without which it will fail to build with:
In file included from kernel/trace/bpf_trace.c:14:0:
kernel/trace/trace.h: In function ‘trace_test_and_set_recursion’:
kernel/trace/trace.h:491:28: error: ‘struct task_struct’ has no member named ‘trace_recursion’
unsigned int val = current->trace_recursion;
[...]
It took quite some time to trigger this build failure, because right now
BPF_SYSCALL is very obscure, depends on CONFIG_EXPERT. So also make BPF_SYSCALL
more configurable, not just under CONFIG_EXPERT.
If BPF_SYSCALL, tracing and kprobes are enabled then enable the bpf_tracing
gateway as well.
We might want to make this an interactive option later on, although
I'd not complicate it unnecessarily: enabling BPF_SYSCALL is enough of
an indicator that the user wants BPF support.
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
BPF programs, attached to kprobes, provide a safe way to execute
user-defined BPF byte-code programs without being able to crash or
hang the kernel in any way. The BPF engine makes sure that such
programs have a finite execution time and that they cannot break
out of their sandbox.
The user interface is to attach to a kprobe via the perf syscall:
struct perf_event_attr attr = {
.type = PERF_TYPE_TRACEPOINT,
.config = event_id,
...
};
event_fd = perf_event_open(&attr,...);
ioctl(event_fd, PERF_EVENT_IOC_SET_BPF, prog_fd);
'prog_fd' is a file descriptor associated with BPF program
previously loaded.
'event_id' is an ID of the kprobe created.
Closing 'event_fd':
close(event_fd);
... automatically detaches BPF program from it.
BPF programs can call in-kernel helper functions to:
- lookup/update/delete elements in maps
- probe_read - wraper of probe_kernel_read() used to access any
kernel data structures
BPF programs receive 'struct pt_regs *' as an input ('struct pt_regs' is
architecture dependent) and return 0 to ignore the event and 1 to store
kprobe event into the ring buffer.
Note, kprobes are a fundamentally _not_ a stable kernel ABI,
so BPF programs attached to kprobes must be recompiled for
every kernel version and user must supply correct LINUX_VERSION_CODE
in attr.kern_version during bpf_prog_load() call.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1427312966-8434-4-git-send-email-ast@plumgrid.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull s390 updates from Martin Schwidefsky:
- The remaining patches for the z13 machine support: kernel build
option for z13, the cache synonym avoidance, SMT support,
compare-and-delay for spinloops and the CES5S crypto adapater.
- The ftrace support for function tracing with the gcc hotpatch option.
This touches common code Makefiles, Steven is ok with the changes.
- The hypfs file system gets an extension to access diagnose 0x0c data
in user space for performance analysis for Linux running under z/VM.
- The iucv hvc console gets wildcard spport for the user id filtering.
- The cacheinfo code is converted to use the generic infrastructure.
- Cleanup and bug fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits)
s390/process: free vx save area when releasing tasks
s390/hypfs: Eliminate hypfs interval
s390/hypfs: Add diagnose 0c support
s390/cacheinfo: don't use smp_processor_id() in preemptible context
s390/zcrypt: fixed domain scanning problem (again)
s390/smp: increase maximum value of NR_CPUS to 512
s390/jump label: use different nop instruction
s390/jump label: add sanity checks
s390/mm: correct missing space when reporting user process faults
s390/dasd: cleanup profiling
s390/dasd: add locking for global_profile access
s390/ftrace: hotpatch support for function tracing
ftrace: let notrace function attribute disable hotpatching if necessary
ftrace: allow architectures to specify ftrace compile options
s390: reintroduce diag 44 calls for cpu_relax()
s390/zcrypt: Add support for new crypto express (CEX5S) adapter.
s390/zcrypt: Number of supported ap domains is not retrievable.
s390/spinlock: add compare-and-delay to lock wait loops
s390/tape: remove redundant if statement
s390/hvc_iucv: add simple wildcard matches to the iucv allow filter
...
If the kernel is compiled with function tracer support the -pg compile option
is passed to gcc to generate extra code into the prologue of each function.
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so files that are
build conditionally if CONFIG_PM_RUNTIME is set may now be build
if CONFIG_PM is set.
Replace CONFIG_PM_RUNTIME with CONFIG_PM in kernel/trace/Makefile
for this reason.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org.
The trace_seq_*() functions are a nice utility that allows users to manipulate
buffers with printf() like formats. It has its own trace_seq.h header in
include/linux and should be in its own file. Being tied with trace_output.c
is rather awkward.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to help benchmark the time tracepoints take, a new config
option is added called CONFIG_TRACEPOINT_BENCHMARK. When this option
is set a tracepoint is created called "benchmark:benchmark_event".
When the tracepoint is enabled, it kicks off a kernel thread that
goes into an infinite loop (calling cond_sched() to let other tasks
run), and calls the tracepoint. Each iteration will record the time
it took to write to the tracepoint and the next iteration that
data will be passed to the tracepoint itself. That is, the tracepoint
will report the time it took to do the previous tracepoint.
The string written to the tracepoint is a static string of 128 bytes
to keep the time the same. The initial string is simply a write of
"START". The second string records the cold cache time of the first
write which is not added to the rest of the calculations.
As it is a tight loop, it benchmarks as hot cache. That's fine because
we care most about hot paths that are probably in cache already.
An example of the output:
START
first=3672 [COLD CACHED]
last=632 first=3672 max=632 min=632 avg=316 std=446 std^2=199712
last=278 first=3672 max=632 min=278 avg=303 std=316 std^2=100337
last=277 first=3672 max=632 min=277 avg=296 std=258 std^2=67064
last=273 first=3672 max=632 min=273 avg=292 std=224 std^2=50411
last=273 first=3672 max=632 min=273 avg=288 std=200 std^2=40389
last=281 first=3672 max=632 min=273 avg=287 std=183 std^2=33666
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a 'trigger' file for each trace event, enabling 'trace event
triggers' to be set for trace events.
'trace event triggers' are patterned after the existing 'ftrace
function triggers' implementation except that triggers are written to
per-event 'trigger' files instead of to a single file such as the
'set_ftrace_filter' used for ftrace function triggers.
The implementation is meant to be entirely separate from ftrace
function triggers, in order to keep the respective implementations
relatively simple and to allow them to diverge.
The event trigger functionality is built on top of SOFT_DISABLE
functionality. It adds a TRIGGER_MODE bit to the ftrace_event_file
flags which is checked when any trace event fires. Triggers set for a
particular event need to be checked regardless of whether that event
is actually enabled or not - getting an event to fire even if it's not
enabled is what's already implemented by SOFT_DISABLE mode, so trigger
mode directly reuses that. Event trigger essentially inherit the soft
disable logic in __ftrace_event_enable_disable() while adding a bit of
logic and trigger reference counting via tm_ref on top of that in a
new trace_event_trigger_enable_disable() function. Because the base
__ftrace_event_enable_disable() code now needs to be invoked from
outside trace_events.c, a wrapper is also added for those usages.
The triggers for an event are actually invoked via a new function,
event_triggers_call(), and code is also added to invoke them for
ftrace_raw_event calls as well as syscall events.
The main part of the patch creates a new trace_events_trigger.c file
to contain the trace event triggers implementation.
The standard open, read, and release file operations are implemented
here.
The open() implementation sets up for the various open modes of the
'trigger' file. It creates and attaches the trigger iterator and sets
up the command parser. If opened for reading set up the trigger
seq_ops.
The read() implementation parses the event trigger written to the
'trigger' file, looks up the trigger command, and passes it along to
that event_command's func() implementation for command-specific
processing.
The release() implementation does whatever cleanup is needed to
release the 'trigger' file, like releasing the parser and trigger
iterator, etc.
A couple of functions for event command registration and
unregistration are added, along with a list to add them to and a mutex
to protect them, as well as an (initially empty) registration function
to add the set of commands that will be added by future commits, and
call to it from the trace event initialization code.
also added are a couple trigger-specific data structures needed for
these implementations such as a trigger iterator and a struct for
trigger-specific data.
A couple structs consisting mostly of function meant to be implemented
in command-specific ways, event_command and event_trigger_ops, are
used by the generic event trigger command implementations. They're
being put into trace.h alongside the other trace_event data structures
and functions, in the expectation that they'll be needed in several
trace_event-related files such as trace_events_trigger.c and
trace_events.c.
The event_command.func() function is meant to be called by the trigger
parsing code in order to add a trigger instance to the corresponding
event. It essentially coordinates adding a live trigger instance to
the event, and arming the triggering the event.
Every event_command func() implementation essentially does the
same thing for any command:
- choose ops - use the value of param to choose either a number or
count version of event_trigger_ops specific to the command
- do the register or unregister of those ops
- associate a filter, if specified, with the triggering event
The reg() and unreg() ops allow command-specific implementations for
event_trigger_op registration and unregistration, and the
get_trigger_ops() op allows command-specific event_trigger_ops
selection to be parameterized. When a trigger instance is added, the
reg() op essentially adds that trigger to the triggering event and
arms it, while unreg() does the opposite. The set_filter() function
is used to associate a filter with the trigger - if the command
doesn't specify a set_filter() implementation, the command will ignore
filters.
Each command has an associated trigger_type, which serves double duty,
both as a unique identifier for the command as well as a value that
can be used for setting a trigger mode bit during trigger invocation.
The signature of func() adds a pointer to the event_command struct,
used to invoke those functions, along with a command_data param that
can be passed to the reg/unreg functions. This allows func()
implementations to use command-specific blobs and supports code
re-use.
The event_trigger_ops.func() command corrsponds to the trigger 'probe'
function that gets called when the triggering event is actually
invoked. The other functions are used to list the trigger when
needed, along with a couple mundane book-keeping functions.
This also moves event_file_data() into trace.h so it can be used
outside of trace_events.c.
Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Idea-by: Steve Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 56449f437 "tracing: make the trace clocks available generally",
in April 2009, made trace_clock available unconditionally, since
CONFIG_X86_DS used it too.
Commit faa4602e47 "x86, perf, bts, mm: Delete the never used BTS-ptrace code",
in March 2010, removed CONFIG_X86_DS, and now only CONFIG_RING_BUFFER (split
out from CONFIG_TRACING for general use) has a dependency on trace_clock. So,
only compile in trace_clock with CONFIG_RING_BUFFER or CONFIG_TRACING
enabled.
Link: http://lkml.kernel.org/r/20120903024513.GA19583@leaf
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull user-space probe instrumentation from Ingo Molnar:
"The uprobes code originates from SystemTap and has been used for years
in Fedora and RHEL kernels. This version is much rewritten, reviews
from PeterZ, Oleg and myself shaped the end result.
This tree includes uprobes support in 'perf probe' - but SystemTap
(and other tools) can take advantage of user probe points as well.
Sample usage of uprobes via perf, for example to profile malloc()
calls without modifying user-space binaries.
First boot a new kernel with CONFIG_UPROBE_EVENT=y enabled.
If you don't know which function you want to probe you can pick one
from 'perf top' or can get a list all functions that can be probed
within libc (binaries can be specified as well):
$ perf probe -F -x /lib/libc.so.6
To probe libc's malloc():
$ perf probe -x /lib64/libc.so.6 malloc
Added new event:
probe_libc:malloc (on 0x7eac0)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc -aR sleep 1
Make use of it to create a call graph (as the flat profile is going to
look very boring):
$ perf record -e probe_libc:malloc -gR make
[ perf record: Woken up 173 times to write data ]
[ perf record: Captured and wrote 44.190 MB perf.data (~1930712
$ perf report | less
32.03% git libc-2.15.so [.] malloc
|
--- malloc
29.49% cc1 libc-2.15.so [.] malloc
|
--- malloc
|
|--0.95%-- 0x208eb1000000000
|
|--0.63%-- htab_traverse_noresize
11.04% as libc-2.15.so [.] malloc
|
--- malloc
|
7.15% ld libc-2.15.so [.] malloc
|
--- malloc
|
5.07% sh libc-2.15.so [.] malloc
|
--- malloc
|
4.99% python-config libc-2.15.so [.] malloc
|
--- malloc
|
4.54% make libc-2.15.so [.] malloc
|
--- malloc
|
|--7.34%-- glob
| |
| |--93.18%-- 0x41588f
| |
| --6.82%-- glob
| 0x41588f
...
Or:
$ perf report -g flat | less
# Overhead Command Shared Object Symbol
# ........ ............. ............. ..........
#
32.03% git libc-2.15.so [.] malloc
27.19%
malloc
29.49% cc1 libc-2.15.so [.] malloc
24.77%
malloc
11.04% as libc-2.15.so [.] malloc
11.02%
malloc
7.15% ld libc-2.15.so [.] malloc
6.57%
malloc
...
The core uprobes design is fairly straightforward: uprobes probe
points register themselves at (inode:offset) addresses of
libraries/binaries, after which all existing (or new) vmas that map
that address will have a software breakpoint injected at that address.
vmas are COW-ed to preserve original content. The probe points are
kept in an rbtree.
If user-space executes the probed inode:offset instruction address
then an event is generated which can be recovered from the regular
perf event channels and mmap-ed ring-buffer.
Multiple probes at the same address are supported, they create a
dynamic callback list of event consumers.
The basic model is further complicated by the XOL speedup: the
original instruction that is probed is copied (in an architecture
specific fashion) and executed out of line when the probe triggers.
The XOL area is a single vma per process, with a fixed number of
entries (which limits probe execution parallelism).
The API: uprobes are installed/removed via
/sys/kernel/debug/tracing/uprobe_events, the API is integrated to
align with the kprobes interface as much as possible, but is separate
to it.
Injecting a probe point is privileged operation, which can be relaxed
by setting perf_paranoid to -1.
You can use multiple probes as well and mix them with kprobes and
regular PMU events or tracepoints, when instrumenting a task."
Fix up trivial conflicts in mm/memory.c due to previous cleanup of
unmap_single_vma().
* 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf probe: Detect probe target when m/x options are absent
perf probe: Provide perf interface for uprobes
tracing: Fix kconfig warning due to a typo
tracing: Provide trace events interface for uprobes
tracing: Extract out common code for kprobes/uprobes trace events
tracing: Modify is_delete, is_return from int to bool
uprobes/core: Decrement uprobe count before the pages are unmapped
uprobes/core: Make background page replacement logic account for rss_stat counters
uprobes/core: Optimize probe hits with the help of a counter
uprobes/core: Allocate XOL slots for uprobes use
uprobes/core: Handle breakpoint and singlestep exceptions
uprobes/core: Rename bkpt to swbp
uprobes/core: Make order of function parameters consistent across functions
uprobes/core: Make macro names consistent
uprobes: Update copyright notices
uprobes/core: Move insn to arch specific structure
uprobes/core: Remove uprobe_opcode_sz
uprobes/core: Make instruction tables volatile
uprobes: Move to kernel/events/
uprobes/core: Clean up, refactor and improve the code
...
Implements trace_event support for uprobes. In its current form
it can be used to put probes at a specified offset in a file and
dump the required registers when the code flow reaches the
probed address.
The following example shows how to dump the instruction pointer
and %ax a register at the probed text address. Here we are
trying to probe zfree in /bin/zsh:
# cd /sys/kernel/debug/tracing/
# cat /proc/`pgrep zsh`/maps | grep /bin/zsh | grep r-xp
00400000-0048a000 r-xp 00000000 08:03 130904 /bin/zsh
# objdump -T /bin/zsh | grep -w zfree
0000000000446420 g DF .text 0000000000000012 Base
zfree # echo 'p /bin/zsh:0x46420 %ip %ax' > uprobe_events
# cat uprobe_events
p:uprobes/p_zsh_0x46420 /bin/zsh:0x0000000000046420
# echo 1 > events/uprobes/enable
# sleep 20
# echo 0 > events/uprobes/enable
# cat trace
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
zsh-24842 [006] 258544.995456: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [007] 258545.000270: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [002] 258545.043929: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [004] 258547.046129: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120411103043.GB29437@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move parts of trace_kprobe.c that can be shared with upcoming
trace_uprobe.c. Common code to kernel/trace/trace_probe.h and
kernel/trace/trace_probe.c. There are no functional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120409091144.8343.76218.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This tracer was temporarily removed in 6416669 (workqueue:
temporarily remove workqueue tracing, 2010-06-29) but never
reinstated after concurrency managed workqueues were completed.
For almost two years it hasn't been compilable so it seems nobody
is using it. Delete it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits)
perf symbols: Increase symbol KSYM_NAME_LEN size
perf hists browser: Refuse 'a' hotkey on non symbolic views
perf ui browser: Use libslang to read keys
perf tools: Fix tracing info recording
perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads
perf hists: Don't consider filtered entries when calculating column widths
perf hists: Don't decay total_period for filtered entries
perf hists browser: Honour symbol_conf.show_{nr_samples,total_period}
perf hists browser: Do not exit on tab key with single event
perf annotate browser: Don't change selection line when returning from callq
perf tools: handle endianness of feature bitmap
perf tools: Add prelink suggestion to dso update message
perf script: Fix unknown feature comment
perf hists browser: Apply the dso and thread filters when merging new batches
perf hists: Move the dso and thread filters from hist_browser
perf ui browser: Honour the xterm colors
perf top tui: Give color hints just on the percentage, like on --stdio
perf ui browser: Make the colors configurable and change the defaults
perf tui: Remove unneeded call to newtCls on startup
perf hists: Don't format the percentage on hist_entry__snprintf
...
Fix up conflicts in arch/x86/kernel/kprobes.c manually.
Ingo's tree did the insane "add volatile to const array", which just
doesn't make sense ("volatile const"?). But we could remove the const
*and* make the array volatile to make doubly sure that gcc doesn't
optimize it away..
Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the
reader_lock has been turned into a raw lock by the core locking merge,
and there was a new user of it introduced in this perf core merge. Make
sure that new use also uses the raw accessor functions.
Do not build kernel/trace/rpm-traces.c if CONFIG_PM_RUNTIME is not
set, which avoids a build failure.
[rjw: Added the changelog and modified the subject slightly.]
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This patch introduces 3 trace points to prepare for tracing
rpm_idle/rpm_suspend/rpm_resume functions, so we can use these
trace points to replace the current dev_dbg().
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Adding automated tests running as late_initcall. Tests are
compiled in with CONFIG_FTRACE_STARTUP_TEST option.
Adding test event "ftrace_test_filter" used to simulate
filter processing during event occurance.
String filters are compiled and tested against several
test events with different values.
Also testing that evaluation of explicit predicates is ommited
due to the lazy filter evaluation.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1313072754-4620-11-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
DEFINE_TRACE should also exist when CONFIG_EVENT_TRACING=n. Otherwise, setting
only TRACEPOINTS=y is broken.
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20101028153117.GA4051@Krystal>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
tracing/kprobes: unregister_trace_probe needs to be called under mutex
perf: expose event__process function
perf events: Fix mmap offset determination
perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
perf, powerpc: Convert the FSL driver to use local64_t
perf tools: Don't keep unreferenced maps when unmaps are detected
perf session: Invalidate last_match when removing threads from rb_tree
perf session: Free the ref_reloc_sym memory at the right place
x86,mmiotrace: Add support for tracing STOS instruction
perf, sched migration: Librarize task states and event headers helpers
perf, sched migration: Librarize the GUI class
perf, sched migration: Make the GUI class client agnostic
perf, sched migration: Make it vertically scrollable
perf, sched migration: Parameterize cpu height and spacing
perf, sched migration: Fix key bindings
perf, sched migration: Ignore unhandled task states
perf, sched migration: Handle ignored migrate out events
perf: New migration tool overview
tracing: Drop cpparg() macro
perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
...
Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
Add in a helper function to allow the kdb shell to dump the ftrace
buffer.
Modify trace.c to expose the capability to iterate over the ftrace
buffer in a read only capacity.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
The sysprof ftrace plugin doesn't seem to be seriously used
somewhere. There is a branch in the sysprof tree that makes
an interface to it, but the real sysprof tool uses either its
own module or perf events.
Drop the sysprof ftrace plugin then, as it's mostly useless.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
The ksym (breakpoint) ftrace plugin has been superseded by perf
tools that are much more poweful to use the cpu breakpoints.
This tracer doesn't bring more feature. It has been deprecated
for a while now, lets remove it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
We have been resisting new ftrace plugins and removing existing
ones, and kmemtrace has been superseded by kmem trace events
and perf-kmem, so we remove it.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ remove kmemtrace from the makefile, handle slob too ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.
Nobody seem to be using it so far. Then just remove it.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.
It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.
Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.
So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Drop the obsolete "profile" naming used by perf for trace events.
Perf can now do more than simple events counting, so generalize
the API naming.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Quoted from Ingo:
| This reminds me - i think we should eliminate CONFIG_EVENT_PROFILE -
| it's an unnecessary Kconfig complication. If both PERF_EVENTS and
| EVENT_TRACING is enabled we should expose generic tracepoints.
|
| Nor is it limited to event 'profiling', so it has become a misnomer as
| well.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B2F1557.2050705@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/kernel/kprobes.c
kernel/trace/Makefile
Merge reason: hw-breakpoints perf integration is looking
good in testing and in reviews, plus conflicts
are mounting up - so merge & resolve.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename Kprobes-based event tracer to kprobes-based tracing event
(kprobe-event), since it is not a tracer but an extensible
tracing event interface.
This also changes CONFIG_KPROBE_TRACER to CONFIG_KPROBE_EVENT
and sets it y by default.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091104001247.3454.14131.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
kernel/Makefile
kernel/trace/Makefile
kernel/trace/trace.h
samples/Makefile
Merge reason: We need to be uptodate with the perf events development
branch because we plan to rewrite the breakpoints API on top of
perf events.
This patch converts the existing power tracer into an event tracer,
so that power events (C states and frequency changes) can be
tracked via "perf".
This also removes the perl script that was used to demo the tracer;
its functionality is being replaced entirely with timechart.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130542.6d314860@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add kprobes-based event tracer on ftrace.
This tracer is similar to the events tracer which is based on Tracepoint
infrastructure. Instead of Tracepoint, this tracer is based on kprobes
(kprobe and kretprobe). It probes anywhere where kprobes can probe(this
means, all functions body except for __kprobes functions).
Similar to the events tracer, this tracer doesn't need to be activated
via current_tracer, instead of that, just set probe points via
/sys/kernel/debug/tracing/kprobe_events. And you can set filters on each
probe events via /sys/kernel/debug/tracing/events/kprobes/<EVENT>/filter.
This tracer supports following probe arguments for each probe.
%REG : Fetch register REG
sN : Fetch Nth entry of stack (N >= 0)
sa : Fetch stack address.
@ADDR : Fetch memory at ADDR (ADDR should be in kernel)
@SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
aN : Fetch function argument. (N >= 0)
rv : Fetch return value.
ra : Fetch return address.
+|-offs(FETCHARG) : fetch memory at FETCHARG +|- offs address.
See Documentation/trace/kprobetrace.txt in the next patch for details.
Changes from v13:
- Support 'sa' for stack address.
- Use call->data instead of container_of() macro.
[fweisbec@gmail.com: Fixed conflict against latest tracing/core]
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203510.31965.29123.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:
- zero-copy and per-cpu splice() tracing
- binary tracing without printf overhead
- structured logging records exposed under /debug/tracing/events
- trace events embedded in function tracer output and other plugins
- user-defined, per tracepoint filter expressions
...
Cons:
- no dev_t info for the output of plug, unplug_timer and unplug_io events.
no dev_t info for getrq and sleeprq events if bio == NULL.
no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.
This is mainly because we can't get the deivce from a request queue.
But this may change in the future.
- A packet command is converted to a string in TP_assign, not TP_print.
While blktrace do the convertion just before output.
Since pc requests should be rather rare, this is not a big issue.
- In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
has a unique format, which means we have some unused data in a trace entry.
The overhead is minimized by using __dynamic_array() instead of __array().
I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:
dd dd + ioctl blktrace dd + TRACE_EVENT (splice)
1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s
2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s
3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s
So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.
And the binary output of TRACE_EVENT is much smaller than blktrace:
# ls -l -h
-rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
-rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
-rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out
Following are some comparisons between TRACE_EVENT and blktrace:
plug:
kjournald-480 [000] 303.084981: block_plug: [kjournald]
kjournald-480 [000] 303.084981: 8,0 P N [kjournald]
unplug_io:
kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1
kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1
remap:
kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384
bio_backmerge:
kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald]
getrq:
kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald]
bash-2066 [001] 1072.953770: 8,0 G N [bash]
bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash]
rq_complete:
konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0]
ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0]
ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]
rq_insert:
kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald]
Changelog from v2 -> v3:
- use the newly introduced __dynamic_array().
Changelog from v1 -> v2:
- use __string() instead of __array() to minimize the memory required
to store hex dump of rq->cmd().
- support large pc requests.
- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.
- some cleanups.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds an ftrace plugin to detect and profile memory access over kernel
variables. It uses HW Breakpoint interfaces to 'watch memory addresses.
Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Merge reason: this topic is ready for upstream now. It passed
Oleg's review and Andrew had no further mm/*
objections/observations either.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds code that can benchmark the ring buffer as well as
test it. This code can be compiled into the kernel (not recommended)
or as a module.
A separate ring buffer is used to not interfer with other users, like
ftrace. It creates a producer and a consumer (option to disable creation
of the consumer) and will run for 10 seconds, then sleep for 10 seconds
and then repeat.
While running, the producer will write 10 byte loads into the ring
buffer with just putting in the current CPU number. The reader will
continually try to read the buffer. The reader will alternate from reading
the buffer via event by event, or by full pages.
The output is a pr_info, thus it will fill up the syslogs.
Starting ring buffer hammer
End ring buffer hammer
Time: 9000349 (usecs)
Overruns: 12578640
Read: 5358440 (by events)
Entries: 0
Total: 17937080
Missed: 0
Hit: 17937080
Entries per millisec: 1993
501 ns per entry
Sleeping for 10 secs
Starting ring buffer hammer
End ring buffer hammer
Time: 9936350 (usecs)
Overruns: 0
Read: 28146644 (by pages)
Entries: 74
Total: 28146718
Missed: 0
Hit: 28146718
Entries per millisec: 2832
353 ns per entry
Sleeping for 10 secs
Time: is the time the test ran
Overruns: the number of events that were overwritten and not read
Read: the number of events read (either by pages or events)
Entries: the number of entries left in the buffer
(the by pages will only read full pages)
Total: Entries + Read + Overruns
Missed: the number of entries that failed to write
Hit: the number of entries that were written
The above example shows that it takes ~353 nanosecs per entry when
there is a reader, reading by pages (and no overruns)
The event by event reader slowed the producer down to 501 nanosecs.
[ Impact: see how changes to the ring buffer affect stability and performance ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch moves the ftrace creation into include/trace/ftrace.h and
simplifies the work of developers in adding new tracepoints.
Just the act of creating the trace points in include/trace and including
define_trace.h will create the events in the debugfs/tracing/events
directory.
This patch removes the need of include/trace/trace_events.h
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Jeremy Fitzhardinge reported this build failure:
LD .tmp_vmlinux1
arch/x86/kernel/built-in.o: In function `ds_take_timestamp':
git/linux/arch/x86/kernel/ds.c:1380: undefined reference to `trace_clock_global'
git/linux/arch/x86/kernel/ds.c:1380: undefined reference to `trace_clock_global'
Which is due to !CONFIG_TRACING && CONFIG_X86_DS=y.
Expose the trace clock code to CONFIG_X86_DS as well.
[ Unfortunately librarizing doesnt work well - ancient architectures
with no raw_local_irq_save() primitive break the build. ]
Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <49E4413F.7070700@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a new config option, CONFIG_EVENT_TRACING that gets selected
when CONFIG_TRACING is selected and adds everything needed by the stuff
in trace_export - basically all the event tracing support needed by e.g.
bprint, minus the actual events, which are only included if
CONFIG_EVENT_TRACER is selected.
So CONFIG_EVENT_TRACER can be used to turn on or off the generated events
(what I think of as the 'event tracer'), while CONFIG_EVENT_TRACING turns
on or off the base event tracing support used by both the event tracer and
the other things such as bprint that can't be configured out.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1239178441.10295.34.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds per-event filtering to the event tracing subsystem.
It adds a 'filter' debugfs file to each event directory. This file can
be written to to set filters; reading from it will display the current
set of filters set for that event.
Basically, any field listed in the 'format' file for an event can be
filtered on (including strings, but not yet other array types) using
either matching ('==') or non-matching ('!=') 'predicates'. A
'predicate' can be either a single expression:
# echo pid != 0 > filter
# cat filter
pid != 0
or a compound expression of up to 8 sub-expressions combined using '&&'
or '||':
# echo comm == Xorg > filter
# echo "&& sig != 29" > filter
# cat filter
comm == Xorg
&& sig != 29
Only events having field values matching an expression will be available
in the trace output; non-matching events are discarded.
Note that a compound expression is built up by echoing each
sub-expression separately - it's not the most efficient way to do
things, but it keeps the parser simple and assumes that compound
expressions will be relatively uncommon. In any case, a subsequent
patch introducing a way to set filters for entire subsystems should
mitigate any need to do this for lots of events.
Setting a filter without an '&&' or '||' clears the previous filter
completely and sets the filter to the new expression:
# cat filter
comm == Xorg
&& sig != 29
# echo comm != Xorg
# cat filter
comm != Xorg
To clear a filter, echo 0 to the filter file:
# echo 0 > filter
# cat filter
none
The limit of 8 predicates for a compound expression is arbitrary - for
efficiency, it's implemented as an array of pointers to predicates, and
8 seemed more than enough for any filter...
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237710665.7703.48.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new tracing infrastructure feature
Provide infrastructure to generate software perf counter events
from tracepoints.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090319194233.557364871@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide basic callbacks to do syscall tracing.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1236401580-5758-2-git-send-email-fweisbec@gmail.com>
[ simplified it to a trace_printk() for now. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: faster and lighter tracing
Now that we have trace_bprintk() which is faster and consume lesser
memory than trace_printk() and has the same purpose, we can now drop
the old implementation in favour of the binary one from trace_bprintk(),
which means we move all the implementation of trace_bprintk() to
trace_printk(), so the Api doesn't change except that we must now use
trace_seq_bprintk() to print the TRACE_PRINT entries.
Some changes result of this:
- Previously, trace_bprintk depended of a single tracer and couldn't
work without. This tracer has been dropped and the whole implementation
of trace_printk() (like the module formats management) is now integrated
in the tracing core (comes with CONFIG_TRACING), though we keep the file
trace_printk (previously trace_bprintk.c) where we can find the module
management. Thus we don't overflow trace.c
- changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries.
- change a bit trace_printk/trace_vprintk macros to support non-builtin formats
constants, and fix 'const' qualifiers warnings. But this is all transparent for
developers.
- etc...
V2:
- Rebase against last changes
- Fix mispell on the changelog
V3:
- Rebase against last changes (moving trace_printk() to kernel.h)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: save on memory for tracing
Current tracers are typically using a struct(like struct ftrace_entry,
struct ctx_switch_entry, struct special_entr etc...)to record a binary
event. These structs can only record a their own kind of events.
A new kind of tracer need a new struct and a lot of code too handle it.
So we need a generic binary record for events. This infrastructure
is for this purpose.
[fweisbec@gmail.com: rebase against latest -tip, make it safe while sched
tracing as reported by Steven Rostedt]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: allow user apps to read binary format of basic ftrace entries
Currently, only defined raw events export their formats so a binary
reader can parse them. There's no reason that the default ftrace entries
can't export their formats.
This patch adds a subsystem called "ftrace" in the events directory
that includes the ftrace entries for basic ftrace recorded items.
These only have three files in the events directory:
type : printf
available_types : printf
format : format for the event entry
For example:
# cat /debug/tracing/events/ftrace/wakeup/format
name: wakeup
ID: 3
format:
field:unsigned char type; offset:0; size:1;
field:unsigned char flags; offset:1; size:1;
field:unsigned char preempt_count; offset:2; size:1;
field:int pid; offset:4; size:4;
field:int tgid; offset:8; size:4;
field:unsigned int prev_pid; offset:12; size:4;
field:unsigned char prev_prio; offset:16; size:1;
field:unsigned char prev_state; offset:17; size:1;
field:unsigned int next_pid; offset:20; size:4;
field:unsigned char next_prio; offset:24; size:1;
field:unsigned char next_state; offset:25; size:1;
field:unsigned int next_cpu; offset:28; size:4;
print fmt: "%u:%u:%u ==+ %u:%u:%u [%03u]"
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: implement new tracing timestamp APIs
Add three trace clock variants, with differing scalability/precision
tradeoffs:
- local: CPU-local trace clock
- medium: scalable global clock with some jitter
- global: globally monotonic, serialized clock
Make the ring-buffer use the local trace clock internally.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch changes the trace/sched.h to use the DECLARE_TRACE_FMT
such that they are automatically registered with the event tracer.
And it also adds the tracing sched headers to kernel/trace/events.c
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch creates the event tracing infrastructure of ftrace.
It will create the files:
/debug/tracing/available_events
/debug/tracing/set_event
The available_events will list the trace points that have been
registered with the event tracer.
set_events will allow the user to enable or disable an event hook.
example:
# echo sched_wakeup > /debug/tracing/set_event
Will enable the sched_wakeup event (if it is registered).
# echo "!sched_wakeup" >> /debug/tracing/set_event
Will disable the sched_wakeup event (and only that event).
# echo > /debug/tracing/set_event
Will disable all events (notice the '>')
# cat /debug/tracing/available_events > /debug/tracing/set_event
Will enable all registered event hooks.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: new tracer
The workqueue tracer provides some statistical informations
about each cpu workqueue thread such as the number of the
works inserted and executed since their creation. It can help
to evaluate the amount of work each of them have to perform.
For example it can help a developer to decide whether he should
choose a per cpu workqueue instead of a singlethreaded one.
It only traces statistical informations for now but it will probably later
provide event tracing too.
Such a tracer could help too, and be improved, to help rt priority sorted
workqueue development.
To have a snapshot of the workqueues state at any time, just do
cat /debugfs/tracing/trace_stat/workqueues
Ie:
1 125 125 reiserfs/1
1 0 0 scsi_tgtd/1
1 0 0 aio/1
1 0 0 ata/1
1 114 114 kblockd/1
1 0 0 kintegrityd/1
1 2147 2147 events/1
0 0 0 kpsmoused
0 105 105 reiserfs/0
0 0 0 scsi_tgtd/0
0 0 0 aio/0
0 0 0 ata_aux
0 0 0 ata/0
0 0 0 cqueue
0 0 0 kacpi_notify
0 0 0 kacpid
0 149 149 kblockd/0
0 0 0 kintegrityd/0
0 1000 1000 khelper
0 2270 2270 events/0
Changes in V2:
_ Drop the static array based on NR_CPU and dynamically allocate the stat array
with num_possible_cpus() and other cpu mask facilities....
_ Trace workqueue insertion at a bit lower level (insert_work instead of queue_work) to handle
even the workqueue barriers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new tracer plugin
This patch adapts kmemtrace raw events tracing to the unified tracing API.
To enable and use this tracer, just do the following:
echo kmemtrace > /debugfs/tracing/current_tracer
cat /debugfs/tracing/trace
You will have the following output:
# tracer: kmemtrace
#
#
# ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER
# FREE | | | | | | | |
# |
type_id 1 call_site 18446744071565527833 ptr 18446612134395152256
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
That was to stay backward compatible with the format output produced in
inux/tracepoint.h.
This is the default ouput, but note that I tried something else.
If you change an option:
echo kmem_minimalistic > /debugfs/trace_options
and then cat /debugfs/trace, you will have the following output:
# tracer: kmemtrace
#
#
# ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER
# FREE | | | | | | | |
# |
- C 0xffff88007c088780 file_free_rcu
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
+ K 240 240 000000d0 0xffff8800790dc780 -1 d_alloc
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
+ K 240 240 000000d0 0xffff8800790dc870 -1 d_alloc
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
+ K 240 240 000000d0 0xffff8800790dc960 -1 d_alloc
+ K 1304 1312 000000d0 0xffff8800791d7340 -1 reiserfs_alloc_inode
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
- C 0xffff88007cad6000 putname
+ K 992 1000 000000d0 0xffff880079045b58 -1 alloc_inode
+ K 768 1024 000080d0 0xffff88007c096400 -1 alloc_pipe_info
+ K 240 240 000000d0 0xffff8800790dca50 -1 d_alloc
+ K 272 320 000080d0 0xffff88007c088780 -1 get_empty_filp
+ K 272 320 000080d0 0xffff88007c088000 -1 get_empty_filp
Yeah I shall confess kmem_minimalistic should be: kmem_alternative.
Whatever, I find it more readable but this a personal opinion of course.
We can drop it if you want.
On the ALLOC/FREE column, + means an allocation and - a free.
On the type column, you have K = kmalloc, C = cache, P = page
I would like the flags to be GFP_* strings but that would not be easy to not
break the column with strings....
About the node...it seems to always be -1. I don't know why but that shouldn't
be difficult to find.
I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would
be more easy to find the tracer headers if they are all in their common
directory.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend the tracing API
The goal of this patch is to normalize and make more easy the
implementation of statistical (histogram) tracing.
It implements a trace_stat file into the /debugfs/tracing directory where
one can print a one-shot output of statistics/histogram entries.
A tracer has to provide two basic iterator callbacks:
stat_start() => the first entry
stat_next(prev, idx) => the next one.
Note that it is adapted for arrays or hash tables or lists.... since it
provides a pointer to the previous entry and the current index of the
iterator.
These two callbacks are called to get a snapshot of the statistics at each
opening of the trace_stat file because. The values are so updated between
two "cat trace_stat". And the tracer is free to lock its datas during the
iteration to keep consistent values.
Since it is almost always interesting to sort statisticals values to
address the problems by priority, this infrastructure provides a "sorting"
of the stat entries too if desired. A tracer has just to provide a
stat_cmp callback to compare two entries and the stat tracing
infrastructure will build a sorted list of the given entries.
A last callback, called stat_headers, can be implemented by a tracer to
output headers on its trace.
If one of these callbacks is changed on runtime, it just have to signal it
to the stat tracing API by calling the init_tracer_stat() helper.
Changes in V2:
- Fix a memory leak if the user opens multiple times the trace_stat file
without closing it. Now we always free our list before rebuilding it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: simplify/generalize/refactor trace.c
The trace.c file is becoming more difficult to maintain due to the
growing number of events. There is several formats that an event may
be printed. This patch sets up the infrastructure of an event hash to
allow for events to register how they should be printed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: restructure code, cleanup
Remove BTS bits from the hw-branch-tracer (renamed from bts-tracer) and
use the ds interface.
Signed-off-by: Markus Metzger <markut.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new "power-tracer" ftrace plugin
This patch adds a C/P-state ftrace plugin that will generate
detailed statistics about the C/P-states that are being used,
so that we can look at detailed decisions that the C/P-state
code is making, rather than the too high level "average"
that we have today.
An example way of using this is:
mount -t debugfs none /sys/kernel/debug
echo cstate > /sys/kernel/debug/tracing/current_tracer
echo 1 > /sys/kernel/debug/tracing/tracing_enabled
sleep 1
echo 0 > /sys/kernel/debug/tracing/tracing_enabled
cat /sys/kernel/debug/tracing/trace | perl scripts/trace/cstate.pl > out.svg
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch changes the name of the "return function tracer" into
function-graph-tracer which is a more suitable name for a tracing
which makes one able to retrieve the ordered call stack during
the code flow.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new ftrace plugin
A prototype for a BTS ftrace plug-in.
The tracer collects branch trace in a cyclic buffer for each cpu.
The tracer is not configurable and the trace for each snapshot is
appended when doing cat /debug/tracing/trace.
This is a proof of concept that will be extended with future patches
to become a (hopefully) useful tool.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: File name change of trace_unlikely.c
The "unlikely" name for the tracer is quite ugly. We renamed all the
parts of it to "branch" and now it is time to rename the file too.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: name change of unlikely tracer and profiler
Ingo Molnar suggested changing the config from UNLIKELY_PROFILE
to BRANCH_PROFILING. I never did like the "unlikely" name so I
went one step farther, and renamed all the unlikely configurations
to a "BRANCH" variant.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new likely/unlikely branch tracer
This patch adds a way to record the instances of the likely() and unlikely()
branch condition annotations.
When "unlikely" is set in /debugfs/tracing/iter_ctrl the unlikely conditions
will be added to any of the ftrace tracers. The change takes effect when
a new tracer is passed into the current_tracer file.
For example:
bash-3471 [003] 357.014755: [INCORRECT] sched_info_dequeued:sched_stats.h:177
bash-3471 [003] 357.014756: [correct] update_curr:sched_fair.c:489
bash-3471 [003] 357.014758: [correct] calc_delta_fair:sched_fair.c:411
bash-3471 [003] 357.014759: [correct] account_group_exec_runtime:sched_stats.h:356
bash-3471 [003] 357.014761: [correct] update_curr:sched_fair.c:489
bash-3471 [003] 357.014763: [INCORRECT] calc_delta_fair:sched_fair.c:411
bash-3471 [003] 357.014765: [correct] calc_delta_mine:sched.c:1279
Which shows the normal tracer heading, as well as whether the condition was
correct "[correct]" or was mistaken "[INCORRECT]", followed by the function,
file name and line number.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new unlikely/likely profiler
Andrew Morton recently suggested having an in-kernel way to profile
likely and unlikely macros. This patch achieves that goal.
When configured, every(*) likely and unlikely macro gets a counter attached
to it. When the condition is hit, the hit and misses of that condition
are recorded. These numbers can later be retrieved by:
/debugfs/tracing/profile_likely - All likely markers
/debugfs/tracing/profile_unlikely - All unlikely markers.
# cat /debug/tracing/profile_unlikely | head
correct incorrect % Function File Line
------- --------- - -------- ---- ----
2167 0 0 do_arch_prctl process_64.c 832
0 0 0 do_arch_prctl process_64.c 804
2670 0 0 IS_ERR err.h 34
71230 5693 7 __switch_to process_64.c 673
76919 0 0 __switch_to process_64.c 639
43184 33743 43 __switch_to process_64.c 624
12740 64181 83 __switch_to process_64.c 594
12740 64174 83 __switch_to process_64.c 590
# cat /debug/tracing/profile_unlikely | \
awk '{ if ($3 > 25) print $0; }' |head -20
44963 35259 43 __switch_to process_64.c 624
12762 67454 84 __switch_to process_64.c 594
12762 67447 84 __switch_to process_64.c 590
1478 595 28 syscall_get_error syscall.h 51
0 2821 100 syscall_trace_leave ptrace.c 1567
0 1 100 native_smp_prepare_cpus smpboot.c 1237
86338 265881 75 calc_delta_fair sched_fair.c 408
210410 108540 34 calc_delta_mine sched.c 1267
0 54550 100 sched_info_queued sched_stats.h 222
51899 66435 56 pick_next_task_fair sched_fair.c 1422
6 10 62 yield_task_fair sched_fair.c 982
7325 2692 26 rt_policy sched.c 144
0 1270 100 pre_schedule_rt sched_rt.c 1261
1268 48073 97 pick_next_task_rt sched_rt.c 884
0 45181 100 sched_info_dequeued sched_stats.h 177
0 15 100 sched_move_task sched.c 8700
0 15 100 sched_move_task sched.c 8690
53167 33217 38 schedule sched.c 4457
0 80208 100 sched_info_switch sched_stats.h 270
30585 49631 61 context_switch sched.c 2619
# cat /debug/tracing/profile_likely | awk '{ if ($3 > 25) print $0; }'
39900 36577 47 pick_next_task sched.c 4397
20824 15233 42 switch_mm mmu_context_64.h 18
0 7 100 __cancel_work_timer workqueue.c 560
617 66484 99 clocksource_adjust timekeeping.c 456
0 346340 100 audit_syscall_exit auditsc.c 1570
38 347350 99 audit_get_context auditsc.c 732
0 345244 100 audit_syscall_entry auditsc.c 1541
38 1017 96 audit_free auditsc.c 1446
0 1090 100 audit_alloc auditsc.c 862
2618 1090 29 audit_alloc auditsc.c 858
0 6 100 move_masked_irq migration.c 9
1 198 99 probe_sched_wakeup trace_sched_switch.c 58
2 2 50 probe_wakeup trace_sched_wakeup.c 227
0 2 100 probe_wakeup_sched_switch trace_sched_wakeup.c 144
4514 2090 31 __grab_cache_page filemap.c 2149
12882 228786 94 mapping_unevictable pagemap.h 50
4 11 73 __flush_cpu_slab slub.c 1466
627757 330451 34 slab_free slub.c 1731
2959 61245 95 dentry_lru_del_init dcache.c 153
946 1217 56 load_elf_binary binfmt_elf.c 904
102 82 44 disk_put_part genhd.h 206
1 1 50 dst_gc_task dst.c 82
0 19 100 tcp_mss_split_point tcp_output.c 1126
As you can see by the above, there's a bit of work to do in rethinking
the use of some unlikelys and likelys. Note: the unlikely case had 71 hits
that were more than 25%.
Note: After submitting my first version of this patch, Andrew Morton
showed me a version written by Daniel Walker, where I picked up
the following ideas from:
1) Using __builtin_constant_p to avoid profiling fixed values.
2) Using __FILE__ instead of instruction pointers.
3) Using the preprocessor to stop all profiling of likely
annotations from vsyscall_64.c.
Thanks to Andrew Morton, Arjan van de Ven, Theodore Tso and Ingo Molnar
for their feed back on this patch.
(*) Not ever unlikely is recorded, those that are used by vsyscalls
(a few of them) had to have profiling disabled.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new tracing plugin which can trace full (entry+exit) function calls
This tracer uses the low level function return ftrace plugin to
measure the execution time of the kernel functions.
The first field is the caller of the function, the second is the
measured function, and the last one is the execution time in
nanoseconds.
- v3:
- HAVE_FUNCTION_RET_TRACER have been added. Each arch that support ftrace return
should enable it.
- ftrace_return_stub becomes ftrace_stub.
- CONFIG_FUNCTION_RET_TRACER depends now on CONFIG_FUNCTION_TRACER
- Return traces printing can be used for other tracers on trace.c
- Adapt to the new tracing API (no more ctrl_update callback)
- Correct the check of "disabled" during insertion.
- Minor changes...
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER. The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.
This patch was generated mostly by script, and partially by hand.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is a unified tracing buffer that implements a ring buffer that
hopefully everyone will eventually be able to use.
The events recorded into the buffer have the following structure:
struct ring_buffer_event {
u32 type:2, len:3, time_delta:27;
u32 array[];
};
The minimum size of an event is 8 bytes. All events are 4 byte
aligned inside the buffer.
There are 4 types (all internal use for the ring buffer, only
the data type is exported to the interface users).
RINGBUF_TYPE_PADDING: this type is used to note extra space at the end
of a buffer page.
RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events
is greater than the 27 bit delta can hold. We add another
32 bits, and record that in its own event (8 byte size).
RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to
help keep the buffer timestamps in sync.
RINGBUF_TYPE_DATA: The event actually holds user data.
The "len" field is only three bits. Since the data must be
4 byte aligned, this field is shifted left by 2, giving a
max length of 28 bytes. If the data load is greater than 28
bytes, the first array field holds the full length of the
data load and the len field is set to zero.
Example, data size of 7 bytes:
type = RINGBUF_TYPE_DATA
len = 2
time_delta: <time-stamp> - <prev_event-time-stamp>
array[0..1]: <7 bytes of data> <1 byte empty>
This event is saved in 12 bytes of the buffer.
An event with 82 bytes of data:
type = RINGBUF_TYPE_DATA
len = 0
time_delta: <time-stamp> - <prev_event-time-stamp>
array[0]: 84 (Note the alignment)
array[1..14]: <82 bytes of data> <2 bytes empty>
The above event is saved in 92 bytes (if my math is correct).
82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length.
Do not reference the above event struct directly. Use the following
functions to gain access to the event table, since the
ring_buffer_event structure may change in the future.
ring_buffer_event_length(event): get the length of the event.
This is the size of the memory used to record this
event, and not the size of the data pay load.
ring_buffer_time_delta(event): get the time delta of the event
This returns the delta time stamp since the last event.
Note: Even though this is in the header, there should
be no reason to access this directly, accept
for debugging.
ring_buffer_event_data(event): get the data from the event
This is the function to use to get the actual data
from the event. Note, it is only a pointer to the
data inside the buffer. This data must be copied to
another location otherwise you risk it being written
over in the buffer.
ring_buffer_lock: A way to lock the entire buffer.
ring_buffer_unlock: unlock the buffer.
ring_buffer_alloc: create a new ring buffer. Can choose between
overwrite or consumer/producer mode. Overwrite will
overwrite old data, where as consumer producer will
throw away new data if the consumer catches up with the
producer. The consumer/producer is the default.
ring_buffer_free: free the ring buffer.
ring_buffer_resize: resize the buffer. Changes the size of each cpu
buffer. Note, it is up to the caller to provide that
the buffer is not being used while this is happening.
This requirement may go away but do not count on it.
ring_buffer_lock_reserve: locks the ring buffer and allocates an
entry on the buffer to write to.
ring_buffer_unlock_commit: unlocks the ring buffer and commits it to
the buffer.
ring_buffer_write: writes some data into the ring buffer.
ring_buffer_peek: Look at a next item in the cpu buffer.
ring_buffer_consume: get the next item in the cpu buffer and
consume it. That is, this function increments the head
pointer.
ring_buffer_read_start: Start an iterator of a cpu buffer.
For now, this disables the cpu buffer, until you issue
a finish. This is just because we do not want the iterator
to be overwritten. This restriction may change in the future.
But note, this is used for static reading of a buffer which
is usually done "after" a trace. Live readings would want
to use the ring_buffer_consume above, which will not
disable the ring buffer.
ring_buffer_read_finish: Finishes the read iterator and reenables
the ring buffer.
ring_buffer_iter_peek: Look at the next item in the cpu iterator.
ring_buffer_read: Read the iterator and increment it.
ring_buffer_iter_reset: Reset the iterator to point to the beginning
of the cpu buffer.
ring_buffer_iter_empty: Returns true if the iterator is at the end
of the cpu buffer.
ring_buffer_size: returns the size in bytes of each cpu buffer.
Note, the real size is this times the number of CPUs.
ring_buffer_reset_cpu: Sets the cpu buffer to empty
ring_buffer_reset: sets all cpu buffers to empty
ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a
cpu buffer of another buffer. This is handy when you
want to take a snap shot of a running trace on just one
cpu. Having a backup buffer, to swap with facilitates this.
Ftrace max latencies use this.
ring_buffer_empty: Returns true if the ring buffer is empty.
ring_buffer_empty_cpu: Returns true if the cpu buffer is empty.
ring_buffer_record_disable: disable all cpu buffers (read only)
ring_buffer_record_disable_cpu: disable a single cpu buffer (read only)
ring_buffer_record_enable: enable all cpu buffers.
ring_buffer_record_enabl_cpu: enable a single cpu buffer.
ring_buffer_entries: The number of entries in a ring buffer.
ring_buffer_overruns: The number of entries removed due to writing wrap.
ring_buffer_time_stamp: Get the time stamp used by the ring buffer
ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp
into nanosecs.
I still need to implement the GTOD feature. But we need support from
the cpu frequency infrastructure. But this can be done at a later
time without affecting the ring buffer interface.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bring the entry to choose the boot tracer on the kernel config.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A no-op tracer which can serve two purposes:
1. A template for development of a new tracer.
2. A convenient way to see ftrace_printk() calls without
an irrelevant trace making the output messy.
[ mingo@elte.hu: resolved conflicts ]
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is another tracer using the ftrace infrastructure, that examines
at each function call the size of the stack. If the stack use is greater
than the previous max it is recorded.
You can always see (and set) the max stack size seen. By setting it
to zero will start the recording again. The backtrace is also available.
For example:
# cat /debug/tracing/stack_max_size
1856
# cat /debug/tracing/stack_trace
[<c027764d>] stack_trace_call+0x8f/0x101
[<c021b966>] ftrace_call+0x5/0x8
[<c02553cc>] clocksource_get_next+0x12/0x48
[<c02542a5>] update_wall_time+0x538/0x6d1
[<c0245913>] do_timer+0x23/0xb0
[<c0257657>] tick_do_update_jiffies64+0xd9/0xf1
[<c02576b9>] tick_sched_timer+0x4a/0xad
[<c0250fe6>] __run_hrtimer+0x3e/0x75
[<c02518ed>] hrtimer_interrupt+0xf1/0x154
[<c022c870>] smp_apic_timer_interrupt+0x71/0x84
[<c021b7e9>] apic_timer_interrupt+0x2d/0x34
[<c0238597>] finish_task_switch+0x29/0xa0
[<c05abd13>] schedule+0x765/0x7be
[<c05abfca>] schedule_timeout+0x1b/0x90
[<c05ab4d4>] wait_for_common+0xab/0x101
[<c05ab5ac>] wait_for_completion+0x12/0x14
[<c033cfc3>] blk_execute_rq+0x84/0x99
[<c0402470>] scsi_execute+0xc2/0x105
[<c040250a>] scsi_execute_req+0x57/0x7f
[<c043afe0>] sr_test_unit_ready+0x3e/0x97
[<c043bbd6>] sr_media_change+0x43/0x205
[<c046b59f>] media_changed+0x48/0x77
[<c046b5ff>] cdrom_media_changed+0x31/0x37
[<c043b091>] sr_block_media_changed+0x16/0x18
[<c02b9e69>] check_disk_change+0x1b/0x63
[<c046f4c3>] cdrom_open+0x7a1/0x806
[<c043b148>] sr_block_open+0x78/0x8d
[<c02ba4c0>] do_open+0x90/0x257
[<c02ba869>] blkdev_open+0x2d/0x56
[<c0296a1f>] __dentry_open+0x14d/0x23c
[<c0296b32>] nameidata_to_filp+0x24/0x38
[<c02a1c68>] do_filp_open+0x347/0x626
[<c02967ef>] do_sys_open+0x47/0xbc
[<c02968b0>] sys_open+0x23/0x2b
[<c021aadd>] sysenter_do_call+0x12/0x26
I've tested this on both x86_64 and i386.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On Sat, 22 Mar 2008 13:07:47 +0100
Ingo Molnar <mingo@elte.hu> wrote:
> > > i'd suggest the following: pull x86.git and sched-devel.git into a
> > > single tree [the two will combine without rejects]. Then try to add a
> > > kernel/tracing/trace_mmiotrace.c ftrace plugin. The trace_sysprof.c
> > > plugin might be a good example.
> >
> > I did this and now I have mmiotrace enabled/disabled via the tracing
> > framework (what do we call this, since ftrace is one of the tracers?).
>
> cool! could you send the patches for that? (even if they are not fully
> functional yet)
Patch attached in the end. Nice to see how much code disappeared. I tried
to mark all the features I had to break with XXX-comments.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
With the adding of the configuration changes in the Makefile to prevent
tracing of functions in the ftrace code, all tracing of all the ftrace
code has been removed. Unfortunately, one of the selftests, relied on
a function to be traced. With the new change, the function was no longer
traced and the test failed.
This patch separates out the test function into its own file so that
we can add the "-pg" flag to the compilation of that function and the
adding of the mcount call to that function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add preempt off timings. A lot of kernel core code is taken from the RT patch
latency trace that was written by Ingo Molnar.
This adds "preemptoff" and "preemptirqsoff" to /debugfs/tracing/available_tracers
Now instead of just tracing irqs off, preemption off can be selected
to be recorded.
When this is selected, it shares the same files as irqs off timings.
One can either trace preemption off, irqs off, or one or the other off.
By echoing "preemptoff" into /debugfs/tracing/current_tracer, recording
of preempt off only is performed. "irqsoff" will only record the time
irqs are disabled, but "preemptirqsoff" will take the total time irqs
or preemption are disabled. Runtime switching of these options is now
supported by simpling echoing in the appropriate trace name into
/debugfs/tracing/current_tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds the latency tracer infrastructure. This patch
does not add anything that will select and turn it on, but will
be used by later patches.
If it were to be compiled, it would add the following files
to the debugfs:
The root tracing directory:
/debugfs/tracing/
This patch also adds the following files:
available_tracers
list of available tracers. Currently no tracers are
available. Looking into this file only shows
"none" which is used to unregister all tracers.
current_tracer
The trace that is currently active. Empty on start up.
To switch to a tracer simply echo one of the tracers that
are listed in available_tracers:
example: (used with later patches)
echo function > /debugfs/tracing/current_tracer
To disable the tracer:
echo disable > /debugfs/tracing/current_tracer
tracing_enabled
echoing "1" into this file starts the ftrace function tracing
(if sysctl kernel.ftrace_enabled=1)
echoing "0" turns it off.
latency_trace
This file is readonly and holds the result of the trace.
trace
This file outputs a easier to read version of the trace.
iter_ctrl
Controls the way the output of traces look.
So far there's two controls:
echoing in "symonly" will only show the kallsyms variables
without the addresses (if kallsyms was configured)
echoing in "verbose" will change the output to show
a lot more data, but not very easy to understand by
humans.
echoing in "nosymonly" turns off symonly.
echoing in "noverbose" turns off verbose.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is
set to a non-zero value the ftrace routine will be called everytime
we enter a kernel function that is not marked with the "notrace"
attribute.
The ftrace routine will then call a registered function if a function
happens to be registered.
[ This code has been highly hacked by Steven Rostedt and Ingo Molnar,
so don't blame Arnaldo for all of this ;-) ]
Update:
It is now possible to register more than one ftrace function.
If only one ftrace function is registered, that will be the
function that ftrace calls directly. If more than one function
is registered, then ftrace will call a function that will loop
through the functions to call.
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
