We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT.
If the request specifies a new table ID, fib6_new_table() is
called to create a new routing table.
Two concurrent requests could specify the same table ID, so we
need a lock to protect net->ipv6.fib_table_hash[h].
Let's add a spinlock to protect the hash bucket linkage.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250418000443.43734-13-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For MBSSID, each vif (struct ieee80211_vif) stores another vif
pointer for the transmitting profile of MBSSID set. This won't
suffice for MLO as there may be multiple links, each of which can
be part of different MBSSID sets. Hence the information needs to
be stored per-link. Additionally, the transmitted profile itself
may be part of an MLD hence storing vif will not suffice either.
Fix MLO by storing an instance of struct ieee80211_bss_conf
for each link.
Modify following operations to reflect the above structure updates:
- channel switch completion
- BSS color change completion
- Removing nontransmitted links in ieee80211_stop_mbssid()
- drivers retrieving the transmitted link for beacon templates.
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408184501.3715887-3-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During non-transmitted (nontx) profile configuration, interface
index of the transmitted (tx) profile is used to retrieve the
wireless device (wdev) associated with it. With MLO, this 'wdev'
may be part of an MLD with more than one link, hence only
interface index is not sufficient anymore to retrieve the correct
tx profile. Add a new attribute to configure link id of tx profile.
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408184501.3715887-2-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an AP and Non-AP MLD operates in EMLSR mode, EML capabilities
advertised during Association contains information such as EMLSR
transition delay, padding delay and transition timeout values.
Save the EML capabilities information that is received during station
addition and capabilities update in ieee80211_sta so that drivers can use
it for triggering EMLSR operation.
Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20250327051320.3253783-3-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Enhanced multi-link single-radio (EMLSR) operation allows a non-AP MLD
with multiple receive chains to listen on one or more EMLSR links when the
corresponding non-AP STA(s) affiliated with the non-AP MLD is (are) in
the awake state. [IEEE 802.11be-2024, (35.3.17 Enhanced multi-link
single-radio (EMLSR) operation)]
An MLD which intends to enable EMLSR operations will set the EML
Capabilities Present subfield to 1 and shall set the EMLSR Support
subfield in the Common Info field of the Basic Multi-Link element to 1 in
all Management frames that include the Basic Multi-Link element except
Authentication frames. EML capabilities contains information such as
EML Transition timeout, Padding delay and Transition delay. These fields
needs to updated to drivers to trigger EMLSR operation and to transmit and
receive initial control frame and data frames.
Add support to receive EML Capabilities subfield that non-AP MLD
advertises during (re)association request and send it to underlying
drivers during ADD/SET station.
Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20250327051320.3253783-2-quic_ramess@quicinc.com
[accept EMLSR capabilities only for unassoc AP STA]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 484a54c2e5. The CoDel
parameter change essentially disables CoDel on slow stations, with some
questionable assumptions, as Dave pointed out in [0]. Quoting from
there:
But here are my pithy comments as to why this part of mac80211 is so
wrong...
static void sta_update_codel_params(struct sta_info *sta, u32 thr)
{
- if (thr && thr < STA_SLOW_THRESHOLD * sta->local->num_sta) {
1) sta->local->num_sta is the number of associated, rather than
active, stations. "Active" stations in the last 50ms or so, might have
been a better thing to use, but as most people have far more than that
associated, we end up with really lousy codel parameters, all the
time. Mistake numero uno!
2) The STA_SLOW_THRESHOLD was completely arbitrary in 2016.
- sta->cparams.target = MS2TIME(50);
This, by itself, was probably not too bad. 30ms might have been
better, at the time, when we were battling powersave etc, but 20ms was
enough, really, to cover most scenarios, even where we had low rate
2Ghz multicast to cope with. Even then, codel has a hard time finding
any sane drop rate at all, with a target this high.
- sta->cparams.interval = MS2TIME(300);
But this was horrible, a total mistake, that is leading to codel being
completely ineffective in almost any scenario on clients or APS.
100ms, even 80ms, here, would be vastly better than this insanity. I'm
seeing 5+seconds of delay accumulated in a bunch of otherwise happily
fq-ing APs....
100ms of observed jitter during a flow is enough. Certainly (in 2016)
there were interactions with powersave that I did not understand, and
still don't, but if you are transmitting in the first place, powersave
shouldn't be a problemmmm.....
- sta->cparams.ecn = false;
At the time we were pretty nervous about ecn, I'm kind of sanguine
about it now, and reliably indicating ecn seems better than turning it
off for any reason.
[...]
In production, on p2p wireless, I've had 8ms and 80ms for target and
interval for years now, and it works great.
I think Dave's arguments above are basically sound on the face of it,
and various experimentation with tighter CoDel parameters in the OpenWrt
community have show promising results[1]. So I don't think there's any
reason to keep this parameter fiddling; hence this revert.
[0] https://lore.kernel.org/linux-wireless/CAA93jw6NJ2cmLmMauz0xAgC2MGbBq6n0ZiZzAdkK0u4b+O2yXg@mail.gmail.com/
[1] https://forum.openwrt.org/t/reducing-multiplexing-latencies-still-further-in-wifi/133605/130
Suggested-By: Dave Taht <dave.taht@gmail.com>
In-memory-of: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250403183930.197716-1-toke@toke.dk
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jason mentioned at netdevconf that we've run out of tx_flags in
the skb_shinfo(). Gain one bit back by removing the wifi bit.
We can do that because the only userspace application for it
(hostapd) doesn't change the setting on the socket, it just
uses different sockets, and normally doesn't even use this any
more, sending the frames over nl80211 instead.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250313134942.52ff54a140ec.If390bbdc46904cf451256ba989d7a056c457af6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 03df156dd3 ("xdp: double protect netdev->xdp_flags with
netdev->lock") introduces the netdev lock to xdp_set_features_flag().
The change includes a _locked version of the method, as it is possible
for a driver to have already acquired the netdev lock before calling
this helper. However, the same applies to
xdp_features_(set|clear)_redirect_flags(), which ends up calling the
unlocked version of xdp_set_features_flags() leading to deadlocks in
GVE, which grabs the netdev lock as part of its suspend, reset, and
shutdown processes:
[ 833.265543] WARNING: possible recursive locking detected
[ 833.270949] 6.15.0-rc1 #6 Tainted: G E
[ 833.276271] --------------------------------------------
[ 833.281681] systemd-shutdow/1 is trying to acquire lock:
[ 833.287090] ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: xdp_set_features_flag+0x29/0x90
[ 833.295470]
[ 833.295470] but task is already holding lock:
[ 833.301400] ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: gve_shutdown+0x44/0x90 [gve]
[ 833.309508]
[ 833.309508] other info that might help us debug this:
[ 833.316130] Possible unsafe locking scenario:
[ 833.316130]
[ 833.322142] CPU0
[ 833.324681] ----
[ 833.327220] lock(&dev->lock);
[ 833.330455] lock(&dev->lock);
[ 833.333689]
[ 833.333689] *** DEADLOCK ***
[ 833.333689]
[ 833.339701] May be due to missing lock nesting notation
[ 833.339701]
[ 833.346582] 5 locks held by systemd-shutdow/1:
[ 833.351205] #0: ffffffffa9c89130 (system_transition_mutex){+.+.}-{4:4}, at: __se_sys_reboot+0xe6/0x210
[ 833.360695] #1: ffff93b399e5c1b8 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xb4/0x1f0
[ 833.369144] #2: ffff949d19a471b8 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xc2/0x1f0
[ 833.377603] #3: ffffffffa9eca050 (rtnl_mutex){+.+.}-{4:4}, at: gve_shutdown+0x33/0x90 [gve]
[ 833.386138] #4: ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: gve_shutdown+0x44/0x90 [gve]
Introduce xdp_features_(set|clear)_redirect_target_locked() versions
which assume that the netdev lock has already been acquired before
setting the XDP feature flag and update GVE to use the locked version.
Fixes: 03df156dd3 ("xdp: double protect netdev->xdp_flags with netdev->lock")
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250422011643.3509287-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
p8022.c defines two external functions, register_8022_client()
and unregister_8022_client(), the last use of which was removed in
2018 by
commit 7a2e838d28 ("staging: ipx: delete it from the tree")
Remove the p8022.c file, it's corresponding header, and glue
surrounding it. There was one place the header was included in vlan.c
but it didn't use the functions it declared.
There was a comment in net/802/Makefile about checking
against net/core/Makefile, but that's at least 20 years old and
there's no sign of net/core/Makefile mentioning it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250418011519.145320-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FDB entries are currently stored in a hash table with a fixed number of
buckets (256), resulting in performance degradation as the number of
entries grows. Solve this by converting the driver to use rhashtable
which maintains more or less constant performance regardless of the
number of entries.
Measured transmitted packets per second using a single pktgen thread
with varying number of entries when the transmitted packet always hits
the default entry (worst case):
Number of entries | Improvement
------------------|------------
1k | +1.12%
4k | +9.22%
16k | +55%
64k | +585%
256k | +2460%
In addition, the change reduces the size of the VXLAN device structure
from 2584 bytes to 672 bytes.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-16-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, FDB entries are stored in a hash table with a fixed number of
buckets. The table is used for both lookups and entry traversal.
Subsequent patches will convert the table to rhashtable which is not
suitable for entry traversal.
In preparation for this conversion, add FDB entries to a linked list.
Subsequent patches will convert the driver to use this list when
traversing entries during dump, flush, etc.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-8-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the VXLAN driver stores FDB entries in a hash table with a
fixed number of buckets (256). Subsequent patches are going to convert
this table to rhashtable with a linked list for entry traversal, as
rhashtable is more scalable.
In preparation for this conversion, move from a per-bucket spin lock to
a single spin lock that protects the entire FDB table.
The per-bucket spin locks were introduced by commit fe1e0713bb
("vxlan: Use FDB_HASH_SIZE hash_locks to reduce contention") citing
"huge contention when inserting/deleting vxlan_fdbs into the fdb_head".
It is not clear from the commit message which code path was holding the
spin lock for long periods of time, but the obvious suspect is the FDB
cleanup routine (vxlan_cleanup()) that periodically traverses the entire
table in order to delete aged-out entries.
This will be solved by subsequent patches that will convert the FDB
cleanup routine to traverse the linked list of FDB entries using RCU,
only acquiring the spin lock when deleting an aged-out entry.
The change reduces the size of the VXLAN device structure from 3600
bytes to 2576 bytes.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-7-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Check PF capability flag whether the 4M, 1G, and 2G pages are
supported. Add these pages sizes to mana_ib, if supported.
Define possible page sizes in enum gdma_page_type and
remove unused enum atb_page_size.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1744621234-26114-4-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add IB_ZERO_BASED to the valid flags and use
the corresponding MR creation request for the zero
based memory.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1744621234-26114-3-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Kuniyuki reports that the assert for netdev lock fires when
there are netdev event listeners (otherwise we skip the netlink
event generation).
Correct the locking when coming from the notifier.
The NETDEV_XDP_FEAT_CHANGE notifier is already fully locked,
it's the documentation that's incorrect.
Fixes: 99e44f39a8 ("netdev: depend on netdev->lock for xdp features")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/20250410171019.62128-1-kuniyu@amazon.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250416030447.1077551-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add hardware offload configuration to XFRM_MSG_MIGRATE
using an option netlink attribute XFRMA_OFFLOAD_DEV.
In the existing xfrm_state_migrate(), the xfrm_init_state()
is called assuming no hardware offload by default. Even the
original xfrm_state is configured with offload, the setting will
be reset. If the device is configured with hardware offload,
it's reasonable to allow the device to maintain its hardware
offload mode. But the device will end up with offload disabled
after receiving a migration event when the device migrates the
connection from one netdev to another one.
The devices that support migration may work with different
underlying networks, such as mobile devices. The hardware setting
should be forwarded to the different netdev based on the
migration configuration. This change provides the capability
for user space to migrate from one netdev to another.
Test: Tested with kernel test in the Android tree located
in https://android.googlesource.com/kernel/tests/
The xfrm_tunnel_test.py under the tests folder in
particular.
Signed-off-by: Chiachang Wang <chiachangwang@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently, bnxt_en driver satisfies the requirements of the Device
memory TCP, which is HDS.
So, it implements rx-side Device memory TCP for bnxt_en driver.
It requires only converting the page API to netmem API.
`struct page` of agg rings are changed to `netmem_ref netmem` and
corresponding functions are changed to a variant of netmem API.
It also passes PP_FLAG_ALLOW_UNREADABLE_NETMEM flag to a parameter of
page_pool.
The netmem will be activated only when a user requests devmem TCP.
When netmem is activated, received data is unreadable and netmem is
disabled, received data is readable.
But drivers don't need to handle both cases because netmem core API will
handle it properly.
So, using proper netmem API is enough for drivers.
Device memory TCP can be tested with
tools/testing/selftests/drivers/net/hw/ncdevmem.
This is tested with BCM57504-N425G and firmware version 232.0.155.8/pkg
232.1.132.8.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: David Wei <dw@davidwei.uk>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250415052458.1260575-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the bonding ipsec offload operations to fix a number of
long-standing control plane races between state migration and user
deletion and a few other issues.
xfrm state deletion can happen concurrently with
bond_change_active_slave() operation. This manifests itself as a
bond_ipsec_del_sa() call with x->lock held, followed by a
bond_ipsec_free_sa() a bit later from a wq. The alternate path of
these calls coming from xfrm_dev_state_flush() can't happen, as that
needs the RTNL lock and bond_change_active_slave() already holds it.
1. bond_ipsec_del_sa_all() might call xdo_dev_state_delete() a second
time on an xfrm state that was concurrently killed. This is bad.
2. bond_ipsec_add_sa_all() can add a state on the new device, but
pending bond_ipsec_free_sa() calls from the old device will then hit
the WARN_ON() and then, worse, call xdo_dev_state_free() on the new
device without a corresponding xdo_dev_state_delete().
3. Resolve a sleeping in atomic context introduced by the mentioned
"Fixes" commit.
bond_ipsec_del_sa_all() and bond_ipsec_add_sa_all() now acquire x->lock
and check for x->km.state to help with problems 1 and 2. And since
xso.real_dev is now a private pointer managed by the bonding driver in
xfrm state, make better use of it to fully fix problems 1 and 2. In
bond_ipsec_del_sa_all(), set xso.real_dev to NULL while holding both the
mutex and x->lock, which makes sure that neither bond_ipsec_del_sa() nor
bond_ipsec_free_sa() could run concurrently.
Fix problem 3 by moving the list cleanup (which requires the mutex) from
bond_ipsec_del_sa() (called from atomic context) to bond_ipsec_free_sa()
Finally, simplify bond_ipsec_del_sa() and bond_ipsec_free_sa() by using
xso->real_dev directly, since it's now protected by locks and can be
trusted to always reflect the offload device.
Fixes: 2aeeef906d ("bonding: change ipsec_lock from spin lock to mutex")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Previously, device driver IPSec offload implementations would fall into
two categories:
1. Those that used xso.dev to determine the offload device.
2. Those that used xso.real_dev to determine the offload device.
The first category didn't work with bonding while the second did.
In a non-bonding setup the two pointers are the same.
This commit adds explicit pointers for the offload netdevice to
.xdo_dev_state_add() / .xdo_dev_state_delete() / .xdo_dev_state_free()
which eliminates the confusion and allows drivers from the first
category to work with bonding.
xso.real_dev now becomes a private pointer managed by the bonding
driver.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Before commit 40867d74c3 ("net: Add l3mdev index to flow struct and
avoid oif reset for port devices") it was possible to use FIB rules to
match on a L3 domain. This was done by having a FIB rule match on iif /
oif being a L3 master device. It worked because prior to the FIB rule
lookup the iif / oif fields in the flow structure were reset to the
index of the L3 master device to which the input / output device was
enslaved to.
The above scheme made it impossible to match on the original input /
output device. Therefore, cited commit stopped overwriting the iif / oif
fields in the flow structure and instead stored the index of the
enslaving L3 master device in a new field ('flowi_l3mdev') in the flow
structure.
While the change enabled new use cases, it broke the original use case
of matching on a L3 domain. Fix this by interpreting the iif / oif
matching on a L3 master device as a match against the L3 domain. In
other words, if the iif / oif in the FIB rule points to a L3 master
device, compare the provided index against 'flowi_l3mdev' rather than
'flowi_{i,o}if'.
Before cited commit, a FIB rule that matched on 'iif vrf1' would only
match incoming traffic from devices enslaved to 'vrf1'. With the
proposed change (i.e., comparing against 'flowi_l3mdev'), the rule would
also match traffic originating from a socket bound to 'vrf1'. Avoid that
by adding a new flow flag ('FLOWI_FLAG_L3MDEV_OIF') that indicates if
the L3 domain was derived from the output interface or the input
interface (when not set) and take this flag into account when evaluating
the FIB rule against the flow structure.
Avoid unnecessary checks in the data path by detecting that a rule
matches on a L3 master device when the rule is installed and marking it
as such.
Tested using the following script [1].
Output before 40867d74c3 (v5.4.291):
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
Output after 40867d74c374:
default dev dummy1 table 300 scope link
default dev dummy1 table 300 scope link
Output with this patch:
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
[1]
#!/bin/bash
ip link add name vrf1 up type vrf table 10
ip link add name dummy1 up master vrf1 type dummy
sysctl -wq net.ipv4.conf.all.forwarding=1
sysctl -wq net.ipv4.conf.all.rp_filter=0
ip route add table 100 default dev dummy1
ip route add table 200 default dev dummy1
ip route add table 300 default dev dummy1
ip rule add prio 0 oif vrf1 table 100
ip rule add prio 1 iif vrf1 table 200
ip rule add prio 2 table 300
ip route get 192.0.2.1 oif dummy1 fibmatch
ip route get 192.0.2.1 iif dummy1 from 198.51.100.1 fibmatch
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: hanhuihui <hanhuihui5@huawei.com>
Closes: https://lore.kernel.org/netdev/ec671c4f821a4d63904d0da15d604b75@huawei.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new helper function, nlmsg_payload(), to simplify checking and
retrieving Netlink message payloads.
This reduces boilerplate code for users who need to verify the message
length before accessing its data.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-1-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a follow-up of commit b68b106b0f ("mptcp: sched: reduce size
for unused data"), now removing the mptcp_sched_data structure.
Now is a good time to do that, because the previously mentioned WIP work
has been updated, no longer depending on this structure.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-1-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow the app to request that CHALLENGEs be passed to it through an
out-of-band queue that allows recvmsg() to pick it up so that the app can
add data to it with sendmsg().
This will allow the application (AFS or userspace) to interact with the
process if it wants to and put values into user-defined fields. This will
be used by AFS when talking to a fileserver to supply that fileserver with
a crypto key by which callback RPCs can be encrypted (ie. notifications
from the fileserver to the client).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A number of functions separately furnish an AF_RXRPC socket with callback
function pointers into a kernel app (such as the AFS filesystem) that is
using it. Replace most of these with an ops table for the entire socket.
This makes it easier to add more callback functions.
Note that the call incoming data processing callback is retaind as that
gets set to different things, depending on the type of op.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are no ->exit_batch_rtnl() users remaining.
Let's remove the hook.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-15-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_tunnel_delete_nets() iterates the dying netns list and performs the
same operations for each.
Let's export ip_tunnel_destroy() as ip_tunnel_delete_net() and call it
from ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct pernet_operations provides two batching hooks; ->exit_batch()
and ->exit_batch_rtnl().
The batching variant is beneficial if ->exit() meets any of the
following conditions:
1) ->exit() repeatedly acquires a global lock for each netns
2) ->exit() has a time-consuming operation that can be factored
out (e.g. synchronize_rcu(), smp_mb(), etc)
3) ->exit() does not need to repeat the same iterations for each
netns (e.g. inet_twsk_purge())
Currently, none of the ->exit_batch_rtnl() functions satisfy any of
the above conditions because RTNL is factored out and held by the
caller and all of these functions iterate over the dying netns list.
Also, we want to hold per-netns RTNL there but avoid spreading
__rtnl_net_lock() across multiple locations.
Let's add ->exit_rtnl() hook and run it under __rtnl_net_lock().
The following patches will convert all ->exit_batch_rtnl() users
to ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When enabling DMA mapping in page_pool, pages are kept DMA mapped until
they are released from the pool, to avoid the overhead of re-mapping the
pages every time they are used. This causes resource leaks and/or
crashes when there are pages still outstanding while the device is torn
down, because page_pool will attempt an unmap through a non-existent DMA
device on the subsequent page return.
To fix this, implement a simple tracking of outstanding DMA-mapped pages
in page pool using an xarray. This was first suggested by Mina[0], and
turns out to be fairly straight forward: We simply store pointers to
pages directly in the xarray with xa_alloc() when they are first DMA
mapped, and remove them from the array on unmap. Then, when a page pool
is torn down, it can simply walk the xarray and unmap all pages still
present there before returning, which also allows us to get rid of the
get/put_device() calls in page_pool. Using xa_cmpxchg(), no additional
synchronisation is needed, as a page will only ever be unmapped once.
To avoid having to walk the entire xarray on unmap to find the page
reference, we stash the ID assigned by xa_alloc() into the page
structure itself, using the upper bits of the pp_magic field. This
requires a couple of defines to avoid conflicting with the
POINTER_POISON_DELTA define, but this is all evaluated at compile-time,
so does not affect run-time performance. The bitmap calculations in this
patch gives the following number of bits for different architectures:
- 23 bits on 32-bit architectures
- 21 bits on PPC64 (because of the definition of ILLEGAL_POINTER_VALUE)
- 32 bits on other 64-bit architectures
Stashing a value into the unused bits of pp_magic does have the effect
that it can make the value stored there lie outside the unmappable
range (as governed by the mmap_min_addr sysctl), for architectures that
don't define ILLEGAL_POINTER_VALUE. This means that if one of the
pointers that is aliased to the pp_magic field (such as page->lru.next)
is dereferenced while the page is owned by page_pool, that could lead to
a dereference into userspace, which is a security concern. The risk of
this is mitigated by the fact that (a) we always clear pp_magic before
releasing a page from page_pool, and (b) this would need a
use-after-free bug for struct page, which can have many other risks
since page->lru.next is used as a generic list pointer in multiple
places in the kernel. As such, with this patch we take the position that
this risk is negligible in practice. For more discussion, see[1].
Since all the tracking added in this patch is performed on DMA
map/unmap, no additional code is needed in the fast path, meaning the
performance overhead of this tracking is negligible there. A
micro-benchmark shows that the total overhead of the tracking itself is
about 400 ns (39 cycles(tsc) 395.218 ns; sum for both map and unmap[2]).
Since this cost is only paid on DMA map and unmap, it seems like an
acceptable cost to fix the late unmap issue. Further optimisation can
narrow the cases where this cost is paid (for instance by eliding the
tracking when DMA map/unmap is a no-op).
The extra memory needed to track the pages is neatly encapsulated inside
xarray, which uses the 'struct xa_node' structure to track items. This
structure is 576 bytes long, with slots for 64 items, meaning that a
full node occurs only 9 bytes of overhead per slot it tracks (in
practice, it probably won't be this efficient, but in any case it should
be an acceptable overhead).
[0] https://lore.kernel.org/all/CAHS8izPg7B5DwKfSuzz-iOop_YRbk3Sd6Y4rX7KBG9DcVJcyWg@mail.gmail.com/
[1] https://lore.kernel.org/r/20250320023202.GA25514@openwall.com
[2] https://lore.kernel.org/r/ae07144c-9295-4c9d-a400-153bb689fe9e@huawei.com
Reported-by: Yonglong Liu <liuyonglong@huawei.com>
Closes: https://lore.kernel.org/r/8743264a-9700-4227-a556-5f931c720211@huawei.com
Fixes: ff7d6b27f8 ("page_pool: refurbish version of page_pool code")
Suggested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Tested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Tested-by: Qiuling Ren <qren@redhat.com>
Tested-by: Yuying Ma <yuma@redhat.com>
Tested-by: Yonglong Liu <liuyonglong@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409-page-pool-track-dma-v9-2-6a9ef2e0cba8@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
DCCP was removed, so tcp_or_dccp_get_hashinfo() should be renamed.
Let's rename it to tcp_get_hashinfo().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250410023921.11307-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCCP was removed, so many inet functions no longer need to
be exported.
Let's unexport or use EXPORT_IPV6_MOD() for such functions.
sk_free_unlock_clone() is inlined in sk_clone_lock() as it's
the only caller.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250410023921.11307-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCCP was orphaned in 2021 by commit 054c4610bd ("MAINTAINERS: dccp:
move Gerrit Renker to CREDITS"), which noted that the last maintainer
had been inactive for five years.
In recent years, it has become a playground for syzbot, and most changes
to DCCP have been odd bug fixes triggered by syzbot. Apart from that,
the only changes have been driven by treewide or networking API updates
or adjustments related to TCP.
Thus, in 2023, we announced we would remove DCCP in 2025 via commit
b144fcaf46 ("dccp: Print deprecation notice.").
Since then, only one individual has contacted the netdev mailing list. [0]
There is ongoing research for Multipath DCCP. The repository is hosted
on GitHub [1], and development is not taking place through the upstream
community. While the repository is published under the GPLv2 license,
the scheduling part remains proprietary, with a LICENSE file [2] stating:
"This is not Open Source software."
The researcher mentioned a plan to address the licensing issue, upstream
the patches, and step up as a maintainer, but there has been no further
communication since then.
Maintaining DCCP for a decade without any real users has become a burden.
Therefore, it's time to remove it.
Removing DCCP will also provide significant benefits to TCP. It allows
us to freely reorganize the layout of struct inet_connection_sock, which
is currently shared with DCCP, and optimize it to reduce the number of
cachelines accessed in the TCP fast path.
Note that we keep DCCP netfilter modules as requested. [3]
Link: https://lore.kernel.org/netdev/20230710182253.81446-1-kuniyu@amazon.com/T/#u #[0]
Link: https://github.com/telekom/mp-dccp #[1]
Link: https://github.com/telekom/mp-dccp/blob/mpdccp_v03_k5.10/net/dccp/non_gpl_scheduler/LICENSE #[2]
Link: https://lore.kernel.org/netdev/Z_VQ0KlCRkqYWXa-@calendula/ #[3]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM and SELinux)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://patch.msgid.link/20250410023921.11307-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP is in TIME_WAIT state, PAWS verification uses
LINUX_PAWSESTABREJECTED, which is ambiguous and cannot be distinguished
from other PAWS verification processes.
We added a new counter, like the existing PAWS_OLD_ACK one.
Also we update the doc with previously missing PAWS_OLD_ACK.
usage:
'''
nstat -az | grep PAWSTimewait
TcpExtPAWSTimewait 1 0.0
'''
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250409112614.16153-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devices in the networking path, such as firewalls, NATs, or routers, which
can perform SNAT or DNAT, use addresses from their own limited address
pools to masquerade the source address during forwarding, causing PAWS
verification to fail more easily.
Currently, packet loss statistics for PAWS can only be viewed through MIB,
which is a global metric and cannot be precisely obtained through tracing
to get the specific 4-tuple of the dropped packet. In the past, we had to
use kprobe ret to retrieve relevant skb information from
tcp_timewait_state_process().
We add a drop_reason pointer, similar to what previous commit does:
commit e34100c2ec ("tcp: add a drop_reason pointer to tcp_check_req()")
This commit addresses the PAWSESTABREJECTED case and also sets the
corresponding drop reason.
We use 'pwru' to test.
Before this commit:
''''
./pwru 'port 9999'
2025/04/07 13:40:19 Listening for events..
TUPLE FUNC
172.31.75.115:12345->172.31.75.114:9999(tcp) sk_skb_reason_drop(SKB_DROP_REASON_NOT_SPECIFIED)
'''
After this commit:
'''
./pwru 'port 9999'
2025/04/07 13:51:34 Listening for events..
TUPLE FUNC
172.31.75.115:12345->172.31.75.114:9999(tcp) sk_skb_reason_drop(SKB_DROP_REASON_TCP_RFC7323_TW_PAWS)
'''
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250409112614.16153-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink().
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr().
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wkGz
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink()
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr()
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority"
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
When I ran the repro [0] and waited a few seconds, I observed two
LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1]
Reproduction Steps:
1) Mount CIFS
2) Add an iptables rule to drop incoming FIN packets for CIFS
3) Unmount CIFS
4) Unload the CIFS module
5) Remove the iptables rule
At step 3), the CIFS module calls sock_release() for the underlying
TCP socket, and it returns quickly. However, the socket remains in
FIN_WAIT_1 because incoming FIN packets are dropped.
At this point, the module's refcnt is 0 while the socket is still
alive, so the following rmmod command succeeds.
# ss -tan
State Recv-Q Send-Q Local Address:Port Peer Address:Port
FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445
# lsmod | grep cifs
cifs 1159168 0
This highlights a discrepancy between the lifetime of the CIFS module
and the underlying TCP socket. Even after CIFS calls sock_release()
and it returns, the TCP socket does not die immediately in order to
close the connection gracefully.
While this is generally fine, it causes an issue with LOCKDEP because
CIFS assigns a different lock class to the TCP socket's sk->sk_lock
using sock_lock_init_class_and_name().
Once an incoming packet is processed for the socket or a timer fires,
sk->sk_lock is acquired.
Then, LOCKDEP checks the lock context in check_wait_context(), where
hlock_class() is called to retrieve the lock class. However, since
the module has already been unloaded, hlock_class() logs a warning
and returns NULL, triggering the null-ptr-deref.
If LOCKDEP is enabled, we must ensure that a module calling
sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded
while such a socket is still alive to prevent this issue.
Let's hold the module reference in sock_lock_init_class_and_name()
and release it when the socket is freed in sk_prot_free().
Note that sock_lock_init() clears sk->sk_owner for svc_create_socket()
that calls sock_lock_init_class_and_name() for a listening socket,
which clones a socket by sk_clone_lock() without GFP_ZERO.
[0]:
CIFS_SERVER="10.0.0.137"
CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST"
DEV="enp0s3"
CRED="/root/WindowsCredential.txt"
MNT=$(mktemp -d /tmp/XXXXXX)
mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1
iptables -A INPUT -s ${CIFS_SERVER} -j DROP
for i in $(seq 10);
do
umount ${MNT}
rmmod cifs
sleep 1
done
rm -r ${MNT}
iptables -D INPUT -s ${CIFS_SERVER} -j DROP
[1]:
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
...
Call Trace:
<IRQ>
__lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178)
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
...
BUG: kernel NULL pointer dereference, address: 00000000000000c4
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__lock_acquire (kernel/locking/lockdep.c:4852 kernel/locking/lockdep.c:5178)
Code: 15 41 09 c7 41 8b 44 24 20 25 ff 1f 00 00 41 09 c7 8b 84 24 a0 00 00 00 45 89 7c 24 20 41 89 44 24 24 e8 e1 bc ff ff 4c 89 e7 <44> 0f b6 b8 c4 00 00 00 e8 d1 bc ff ff 0f b6 80 c5 00 00 00 88 44
RSP: 0018:ffa0000000468a10 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ff1100010091cc38 RCX: 0000000000000027
RDX: ff1100081f09ca48 RSI: 0000000000000001 RDI: ff1100010091cc88
RBP: ff1100010091c200 R08: ff1100083fe6e228 R09: 00000000ffffbfff
R10: ff1100081eca0000 R11: ff1100083fe10dc0 R12: ff1100010091cc88
R13: 0000000000000001 R14: 0000000000000000 R15: 00000000000424b1
FS: 0000000000000000(0000) GS:ff1100081f080000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c4 CR3: 0000000002c4a003 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (./include/linux/rcupdate.h:878 net/ipv4/ip_input.c:234)
ip_sublist_rcv_finish (net/ipv4/ip_input.c:576)
ip_list_rcv_finish (net/ipv4/ip_input.c:628)
ip_list_rcv (net/ipv4/ip_input.c:670)
__netif_receive_skb_list_core (net/core/dev.c:5939 net/core/dev.c:5986)
netif_receive_skb_list_internal (net/core/dev.c:6040 net/core/dev.c:6129)
napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:519 ./include/net/gro.h:514 net/core/dev.c:6496)
e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3815)
__napi_poll.constprop.0 (net/core/dev.c:7191)
net_rx_action (net/core/dev.c:7262 net/core/dev.c:7382)
handle_softirqs (kernel/softirq.c:561)
__irq_exit_rcu (kernel/softirq.c:596 kernel/softirq.c:435 kernel/softirq.c:662)
irq_exit_rcu (kernel/softirq.c:680)
common_interrupt (arch/x86/kernel/irq.c:280 (discriminator 14))
</IRQ>
<TASK>
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:693)
RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:744)
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d c3 2b 15 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffa00000000ffee8 EFLAGS: 00000202
RAX: 000000000000640b RBX: ff1100010091c200 RCX: 0000000000061aa4
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff812f30c5
RBP: 000000000000000a R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118)
do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
cpu_startup_entry (kernel/sched/idle.c:422 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:315)
common_startup_64 (arch/x86/kernel/head_64.S:421)
</TASK>
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CR2: 00000000000000c4
Fixes: ed07536ed6 ("[PATCH] lockdep: annotate nfs/nfsd in-kernel sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250407163313.22682-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We mostly needed rtnl_lock in qstat to make sure the queue count
is stable while we work. For "ops locked" drivers the instance
lock protects the queue count, so we don't have to take rtnl_lock.
For currently ops-locked drivers: netdevsim and bnxt need
the protection from netdev going down while we dump, which
instance lock provides. gve doesn't care.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect xdp_features with netdev->lock. This way pure readers
no longer have to take rtnl_lock to access the field.
This includes calling NETDEV_XDP_FEAT_CHANGE under the lock.
Looks like that's fine for bonding, the only "real" listener,
it's the same as ethtool feature change.
In terms of normal drivers - only GVE need special consideration
(other drivers don't use instance lock or don't support XDP).
It calls xdp_set_features_flag() helper from gve_init_priv() which
in turn is called from gve_reset_recovery() (locked), or prior
to netdev registration. So switch to _locked.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250408195956.412733-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers to "lock a netdev in a backward-compatible way",
which for ops-locked netdevs will mean take the instance lock.
For drivers which haven't opted into the ops locking we'll take
rtnl_lock.
The scoped foreach is dropping and re-taking the lock for each
device, even if prev and next are both under rtnl_lock.
I hope that's fine since we expect that netdev nl to be mostly
supported by modern drivers, and modern drivers should also
opt into the instance locking.
Note that these helpers are mostly needed for queue related state,
because drivers modify queue config in their ops in a non-atomic
way. Or differently put, queue changes don't have a clear-cut API
like NAPI configuration. Any state that can should just use the
instance lock directly, not the "compat" hacks.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Read accesses go via xsk_get_pool_from_qid(), the call coming
from the core and gve look safe (other "ops locked" drivers
don't support XSK).
Write accesses go via xsk_reg_pool_at_qid() and xsk_clear_pool_at_qid().
Former is already under the ops lock, latter is not (both coming from
the workqueue via xp_clear_dev() and NETDEV_UNREGISTER via xsk_notifier()).
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's quite common to have a single UDP tunnel type active in the
whole system. In such a case we can replace the indirect call for
the UDP tunnel GRO callback with a static call.
Add the related accounting in the control path and switch to static
call when possible. To keep the code simple use a static array for
the registered tunnel types, and size such array based on the kernel
config.
Note that there are valid kernel configurations leading to
UDP_MAX_TUNNEL_TYPES == 0 even with IS_ENABLED(CONFIG_NET_UDP_TUNNEL),
Explicitly skip the accounting in such a case, to avoid compile warning
when accessing "udp_tunnel_gro_types".
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/53d156cdfddcc9678449e873cc83e68fa1582653.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most UDP tunnels bind a socket to a local port, with ANY address, no
peer and no interface index specified.
Additionally it's quite common to have a single tunnel device per
namespace.
Track in each namespace the UDP tunnel socket respecting the above.
When only a single one is present, store a reference in the netns.
When such reference is not NULL, UDP tunnel GRO lookup just need to
match the incoming packet destination port vs the socket local port.
The tunnel socket never sets the reuse[port] flag[s]. When bound to no
address and interface, no other socket can exist in the same netns
matching the specified local port.
Matching packets with non-local destination addresses will be
aggregated, and eventually segmented as needed - no behavior changes
intended.
Restrict the optimization to kernel sockets only: it covers all the
relevant use-cases, and user-space owned sockets could be disconnected
and rebound after setup_udp_tunnel_sock(), breaking the uniqueness
assumption
Note that the UDP tunnel socket reference is stored into struct
netns_ipv4 for both IPv4 and IPv6 tunnels. That is intentional to keep
all the fastpath-related netns fields in the same struct and allow
cacheline-based optimization. Currently both the IPv4 and IPv6 socket
pointer share the same cacheline as the `udp_table` field.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/41d16bc8d1257d567f9344c445b4ae0b4a91ede4.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an rcu_head to sd_flow_limit and rps_sock_flow_table structs
to use the more conventional and predictable k[v]free_rcu().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250407163602.170356-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.
There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().
This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.
This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c5 ("sctp: remove the dead field of sctp_transport").
Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.
If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.
The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]).
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport.txt [1]
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport__repro.c [2]
Cc: stable@vger.kernel.org
Fixes: df132eff46 ("sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250404-kasan_slab-use-after-free_read_in_sctp_outq_select_transport__20250404-v1-1-5ce4a0b78ef2@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
devmem code performs a number of safety checks to avoid having
to reimplement all of them in the drivers. Move those to
__net_mp_open_rxq() and reuse that function for binding to make
sure that io_uring ZC also benefits from them.
While at it rename the queue ID variable to rxq_idx in
__net_mp_open_rxq(), we touch most of the relevant lines.
The XArray insertion is reordered after the netdev_rx_queue_restart()
call, otherwise we'd need to duplicate the queue index check
or risk inserting an invalid pointer. The XArray allocation
failures should be extremely rare.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: 6e18ed929d ("net: add helpers for setting a memory provider on an rx queue")
Link: https://patch.msgid.link/20250403013405.2827250-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to exercise and verify notifiers' locking assumptions,
register dummy notifiers (via register_netdevice_notifier_dev_net).
Share notifier event handler that enforces the assumptions with
lock_debug.c (rename and export rtnl_net_debug_event as
netdev_debug_event). Add ops lock asserts to netdev_debug_event.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_add_dev might call dev_disable_lro which unconditionally grabs
instance lock, so it will deadlock during NETDEV_REGISTER. Switch
to netif_disable_lro.
Make sure all callers hold the instance lock as well.
Cc: Cosmin Ratiu <cratiu@nvidia.com>
Fixes: ad7c7b2172 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc",
error queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported,
avoid spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=BDoM
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
Uros Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was founf to be incorrect.
- The 4 patch series "Some cleanup for memcg" from Chen Ridong
implements some relatively monir cleanups for the memcontrol code.
- The 17 patch series "mm: fixes for device-exclusive entries (hmm)"
from David Hildenbrand fixes a boatload of issues which David found then
using device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now succeed.
- The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry
Ahmed remove the z3fold and zbud implementations. They have been
deprecated for half a year and nobody has complained.
- The 5 patch series "mm: further simplify VMA merge operation" from
Lorenzo Stoakes implements numerous simplifications in this area. No
runtime effects are anticipated.
- The 4 patch series "mm/madvise: remove redundant mmap_lock operations
from process_madvise()" from SeongJae Park rationalizes the locking in
the madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The 12 patch series "Tiny cleanup and improvements about SWAP code"
from Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The 2 patch series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak user-visible
output.
- The 2 patch series "mm/damon/paddr: fix large folios access and
schemes handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The 3 patch series "mm/damon/core: fix wrong and/or useless
damos_walk() behaviors" from SeongJae Park fixes a few issues with the
accuracy of kdamond's walking of DAMON regions.
- The 3 patch series "expose mapping wrprotect, fix fb_defio use" from
Lorenzo Stoakes changes the interaction between framebuffer deferred-io
and core MM. No functional changes are anticipated - this is
preparatory work for the future removal of page structure fields.
- The 4 patch series "mm/damon: add support for hugepage_size DAMOS
filter" from Usama Arif adds a DAMOS filter which permits the filtering
by huge page sizes.
- The 4 patch series "mm: permit guard regions for file-backed/shmem
mappings" from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The 4 patch series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping for
pte-mapped large folios.
- The 18 patch series "reimplement per-vma lock as a refcount" from
Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation
fixes and improves" from SeongJae Park does some maintenance work on the
DAMON docs.
- The 27 patch series "hugetlb/CMA improvements for large systems" from
Frank van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped
pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The 19 patch series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The 12 patch series "selftests/mm: Some cleanups from trying to run
them" from Brendan Jackman fixes a pile of unrelated issues which
Brendan encountered while runnimg our selftests.
- The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap"
from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply wasn't
being effective.
- The 5 patch series "mm: cleanups for device-exclusive entries (hmm)"
from David Hildenbrand implements a number of unrelated cleanups in this
code.
- The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman
Khandual implements a number of preparatoty cleanups to the
GENERIC_PTDUMP Kconfig logic.
- The 8 patch series "mm/damon: auto-tune aggregation interval" from
SeongJae Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some
issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did
this in preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The 2 patch series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the code
easier to follow.
- The 3 patch series "page_counter cleanup and size reduction" from
Shakeel Butt cleans up the page_counter code and fixes a size increase
which we accidentally added late last year.
- The 3 patch series "Add a command line option that enables control of
how many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The 3 patch series "Fix calculations in trace_balance_dirty_pages()
for cgwb" from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The 9 patch series "mm/damon: make allow filters after reject filters
useful and intuitive" from SeongJae Park improves the handling of allow
and reject filters. Behaviour is made more consistent and the
documention is updated accordingly.
- The 5 patch series "Switch zswap to object read/write APIs" from Yosry
Ahmed updates zswap to the new object read/write APIs and thus permits
the removal of some legacy code from zpool and zsmalloc.
- The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang
does as it claims.
- The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts"
from Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes
is a preparatoty refactoring and cleanup of the mremap() code.
- The 20 patch series "mm: MM owner tracking for large folios (!hugetlb)
+ CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS
filters based on handling layers" from SeongJae Park adds a couple of
new sysfs directories to ease the management of DAMON/DAMOS filters.
- The 13 patch series "arch, mm: reduce code duplication in mem_init()"
from Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The 13 patch series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The 3 patch series "mm: page_ext: Introduce new iteration API" from
Luiz Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The 8 patch series "Buddy allocator like (or non-uniform) folio split"
from Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios are
generated.
- The 2 patch series "Minimize xa_node allocation during xarry split"
from Zi Yan reduces the number of xarray xa_nodes which are generated
during an xarray split.
- The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The 3 patch series "Add tracepoints for lowmem reserves, watermarks
and totalreserve_pages" from Martin Liu adds some more tracepoints to
the page allocator code.
- The 4 patch series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which SeongJae
observed during his earlier madvise work.
- The 3 patch series "mm/hwpoison: Fix regressions in memory failure
handling" from Shuai Xue addresses two quite serious regressions which
Shuai has observed in the memory-failure implementation.
- The 5 patch series "mm: reliable huge page allocator" from Johannes
Weiner makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The 5 patch series "Minor memcg cleanups & prep for memdescs" from
Matthew Wilcox is preparatory work for the future implementation of
memdescs.
- The 4 patch series "track memory used by balloon drivers" from Nico
Pache introduces a way to track memory used by our various balloon
drivers.
- The 2 patch series "mm/damon: introduce DAMOS filter type for active
pages" from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The 2 patch series "Adding Proactive Memory Reclaim Statistics" from
Hao Jia separates the proactive reclaim statistics from the direct
reclaim statistics.
- The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio"
from Jinjiang Tu fixes our handling of hwpoisoned pages within the
reclaim code.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA
jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF
Ee93qSSLR1BkNdDw+931Pu0mXfbnBw==
=Pn2K
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
This reverts commit 0de2a5c4b8.
I forgot that a TCP socket could receive messages in its error queue.
sock_queue_err_skb() can be called without socket lock being held,
and changes sk->sk_rmem_alloc.
The fact that skbs in error queue are limited by sk->sk_rcvbuf
means that error messages can be dropped if socket receive
queues are full, which is an orthogonal issue.
In future kernels, we could use a separate sk->sk_error_mem_alloc
counter specifically for the error queue.
Fixes: 0de2a5c4b8 ("tcp: avoid atomic operations on sk->sk_rmem_alloc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250331075946.31960-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser, mlx5,
vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting in-kernel
verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism to
access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ+ap4gAKCRCFwuHvBreF
YaFHAP9wyeZCZIbnWaGcbNdbsmkEgy7aTVILRHf1NA7VSJ211gD9Ha60E+mkwtvA
i7IJ49R2BdqzKaO9oTutj2Lw+8rABwQ=
=qXhh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser,
mlx5, vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting
in-kernel verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism
to access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (73 commits)
IB/mad: Check available slots before posting receive WRs
RDMA/mana_ib: Fix integer overflow during queue creation
RDMA/mlx5: Fix calculation of total invalidated pages
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
RDMA/mlx5: Fix page_size variable overflow
RDMA/mlx5: Drop access_flags from _mlx5_mr_cache_alloc()
RDMA/mlx5: Fix cache entry update on dereg error
RDMA/mlx5: Fix MR cache initialization error flow
RDMA/mlx5: Support optional-counters binding for QPs
RDMA/mlx5: Compile fs.c regardless of INFINIBAND_USER_ACCESS config
RDMA/core: Pass port to counter bind/unbind operations
RDMA/core: Add support to optional-counters binding configuration
RDMA/core: Create and destroy rdma_counter using rdma_zalloc_drv_obj()
RDMA/mlx5: Add optional counters for RDMA_TX/RX_packets/bytes
RDMA/core: Fix use-after-free when rename device name
RDMA/bnxt_re: Support perf management counters
RDMA/rxe: Fix incorrect return value of rxe_odp_atomic_op()
RDMA/uverbs: Propagate errors from rdma_lookup_get_uobject()
RDMA/mana_ib: Handle net event for pointing to the current netdev
net: mana: Change the function signature of mana_get_primary_netdev_rcu
...
Core & protocols
----------------
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls).
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked)
in BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream performance
up to 2x.
- Improve performance of contended connect() by 200% by searching
for an available 4-tuple under RCU rather than a spin lock.
Bring an additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles.
There are up to 4 namespace roles but we used to have just 2 netns
pointer arguments, interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout
in TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar
to normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name
to messages as metadata
Driver API
----------
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where possible.
Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers
--------------
- Remove the IBM LCS driver for s390.
- Remove the sb1000 cable modem driver.
- Add support for SFP module access over SMBus.
- Add MCTP transport driver for MCTP-over-USB.
- Enable XDP metadata support in multiple drivers.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96% with
1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XY0S
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
Merge in late fixes to prepare for the 6.15 net-next PR.
No conflicts, adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
919f9f497d ("eth: bnxt: fix out-of-range access of vnic_info array")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After merging the apparmor tree, today's linux-next build (x86_64
allmodconfig) failed like this:
security/apparmor/af_unix.c: In function 'unix_state_double_lock':
security/apparmor/af_unix.c:627:17: error: implicit declaration of function 'unix_state_lock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
627 | unix_state_lock(sk1);
| ^~~~~~~~~~~~~~~
| unix_state_double_lock
security/apparmor/af_unix.c: In function 'unix_state_double_unlock':
security/apparmor/af_unix.c:642:17: error: implicit declaration of function 'unix_state_unlock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
642 | unix_state_unlock(sk1);
| ^~~~~~~~~~~~~~~~~
| unix_state_double_lock
Caused by commit
c05e705812 ("apparmor: add fine grained af_unix mediation")
interacting with commit
84960bf240 ("af_unix: Move internal definitions to net/unix/.")
from the net-next tree.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patch.msgid.link/20250326150148.72d9138d@canb.auug.org.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like what
I did last cycle for the CRC32 and CRC-T10DIF library functions.
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme.
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme.
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since they
are no longer needed there.
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect.
- Add kunit test cases for crc64_nvme and crc7.
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c().
- Remove unnecessary prompts from some of the CRC kconfig options.
- Further optimize the x86 crc32c code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CGGhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3wRAP4tbnzawUmlIHIF0hleoADXehUgAhMt
NZn15mGvyiuwIQEA8W9qvnLdFXZkdxhxAEvDDFjyrRauL6eGtr/GvCx4AQY=
=wmKG
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
-----BEGIN PGP SIGNATURE-----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=XCdn
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
* tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (53 commits)
Bluetooth: MGMT: Add LL Privacy Setting
Bluetooth: hci_event: Fix handling of HCI_EV_LE_DIRECT_ADV_REPORT
Bluetooth: btnxpuart: Fix kernel panic during FW release
Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7
Bluetooth: btnxpuart: Add correct bootloader error codes
t blameBluetooth: btintel: Fix leading white space
Bluetooth: btintel: Add support to configure TX power
Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal
Bluetooth: btmtk: Remove the resetting step before downloading the fw
Bluetooth: SCO: add TX timestamping
Bluetooth: L2CAP: add TX timestamping
Bluetooth: ISO: add TX timestamping
Bluetooth: add support for skb TX SND/COMPLETION timestamping
net-timestamp: COMPLETION timestamp on packet tx completion
HCI: coredump: Log devcd dumps into the monitor
Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel
Bluetooth: hci_vhci: Mark Sync Flow Control as supported
Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO
Bluetooth: btintel_pci: Fix build warning
Bluetooth: btintel_pcie: Trigger device coredump on hardware exception
...
====================
Link: https://patch.msgid.link/20250325192925.2497890-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds LL Privacy (bit 22) to Read Controller Information so the likes
of bluetoothd(1) can detect when the controller supports it or not.
Fixes: e209e5ccc5 ("Bluetooth: MGMT: Mark LL Privacy as stable")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
icsk->icsk_ack.timeout can be replaced by icsk->csk_delack_timer.expires
This saves 8 bytes in TCP/DCCP sockets and helps for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250324203607.703850-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icsk->icsk_timeout can be replaced by icsk->icsk_retransmit_timer.expires
This saves 8 bytes in TCP/DCCP sockets and helps for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250324203607.703850-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev netlink is the only reader of netdev_{,rx_}queue->napi,
and it already holds netdev->lock. Switch protection of
the writes to netdev->lock to "ops protected".
The expectation will be now that accessing queue->napi
will require netdev->lock for "ops locked" drivers, and
rtnl_lock for all other drivers.
Current "ops locked" drivers don't require any changes.
gve and netdevsim use _locked() helpers right next to
netif_queue_set_napi() so they must be holding the instance
lock. iavf doesn't call it. bnxt is a bit messy but all paths
seem locked.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Try to define some terminology for which fields are protected
by which lock and how. Some fields are protected by both rtnl_lock
and instance lock which is hard to talk about without having
a "key phrase" to refer to a particular protection scheme.
"ops protected" fields are defined later in the series, one by one.
Add ASSERT_RTNL() to netdev_ops_assert_locked() for drivers
not other instance protection of ops. Hopefully it's not too
confusion that netdev_lock_ops() does not match the lock which
netdev_ops_assert_locked() will assert, exactly. The noun "ops"
is in a different place in the name, so I think it's acceptable...
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lockdep asserts and predicates can operate on const pointers.
In the future this will let us add asserts in functions
which operate on const pointers like dev_get_min_mp_channel_count().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support TX timestamping in L2CAP sockets.
Support MSG_ERRQUEUE recvmsg.
For other than SOCK_STREAM L2CAP sockets, if a packet from sendmsg() is
fragmented, only the first ACL fragment is timestamped.
For SOCK_STREAM L2CAP sockets, use the bytestream convention and
timestamp the last fragment and count bytes in tskey.
Timestamps are not generated in the Enhanced Retransmission mode, as
meaning of COMPLETION stamp is unclear if L2CAP layer retransmits.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add BT_SCM_ERROR socket CMSG type.
Support TX timestamping in ISO sockets.
Support MSG_ERRQUEUE in ISO recvmsg.
If a packet from sendmsg() is fragmented, only the first ACL fragment is
timestamped.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support enabling TX timestamping for some skbs, and track them until
packet completion. Generate software SCM_TSTAMP_COMPLETION when getting
completion report from hardware.
Generate software SCM_TSTAMP_SND before sending to driver. Sending from
driver requires changes in the driver API, and drivers mostly are going
to send the skb immediately.
Make the default situation with no COMPLETION TX timestamping more
efficient by only counting packets in the queue when there is nothing to
track. When there is something to track, we need to make clones, since
the driver may modify sent skbs.
The tx_q queue length is bounded by the hdev flow control, which will
not send new packets before it has got completion reports for old ones.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Return Parameters is not only status, also bdaddr:
BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E
page 1870:
BLUETOOTH CORE SPECIFICATION Version 5.0 | Vol 2, Part E
page 802:
Return parameters:
Status:
Size: 1 octet
BD_ADDR:
Size: 6 octets
Note that it also fixes the warning:
"Bluetooth: hci0: unexpected cc 0x041a length: 7 > 1"
Fixes: c8992cffbe ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_PAGE_SCAN_TYPE.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_VOICE_SETTING.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() for readability.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mgmt_start_discovery_complete() and mgmt_stop_discovery_complete() last
uses were removed in 2022 by
commit ec2904c259 ("Bluetooth: Remove dead code from hci_request.c")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Revert "udp_tunnel: use static call for GRO hooks when possible"
This reverts commit 311b36574c.
Revert "udp_tunnel: create a fastpath GRO lookup."
This reverts commit 8d4880db37.
There are multiple small issues with the series. In the interest
of unblocking the merge window let's opt for a revert.
Link: https://lore.kernel.org/cover.1742557254.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9RMg
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2025-03-24
1) Prevent setting high order sequence number bits input in
non-ESN mode. From Leon Romanovsky.
2) Support PMTU handling in tunnel mode for packet offload.
From Leon Romanovsky.
3) Make xfrm_state_lookup_byaddr lockless.
From Florian Westphal.
4) Remove unnecessary NULL check in xfrm_lookup_with_ifid().
From Dan Carpenter.
* tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Remove unnecessary NULL check in xfrm_lookup_with_ifid()
xfrm: state: make xfrm_state_lookup_byaddr lockless
xfrm: check for PMTU in tunnel mode for packet offload
xfrm: provide common xdo_dev_offload_ok callback implementation
xfrm: rely on XFRM offload
xfrm: simplify SA initialization routine
xfrm: delay initialization of offload path till its actually requested
xfrm: prevent high SEQ input in non-ESN mode
====================
Link: https://patch.msgid.link/20250324061855.4116819-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=b5n2
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Use kvmalloc in xt_hashlimit, from Denis Kirjanov.
2) Tighten nf_conntrack sysctl accepted values for nf_conntrack_max
and nf_ct_expect_max, from Nicolas Bouchinet.
3) Avoid lookup in nft_fib if socket is available, from Florian Westphal.
4) Initialize struct lsm_context in nfnetlink_queue to avoid
hypothetical ENOMEM errors, Chenyuan Yang.
5) Use strscpy() instead of _pad when initializing xtables table name,
kzalloc is already used to initialized the table memory area.
From Thorsten Blum.
6) Missing socket lookup by conntrack information for IPv6 traffic
in nft_socket, there is a similar chunk in IPv4, this was never
added when IPv6 NAT was introduced. From Maxim Mikityanskiy.
7) Fix clang issues with nf_tables CONFIG_MITIGATION_RETPOLINE,
from WangYuli.
* tag 'nf-next-25-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: Only use nf_skip_indirect_calls() when MITIGATION_RETPOLINE
netfilter: socket: Lookup orig tuple for IPv6 SNAT
netfilter: xtables: Use strscpy() instead of strscpy_pad()
netfilter: nfnetlink_queue: Initialize ctx to avoid memory allocation error
netfilter: fib: avoid lookup if socket is available
netfilter: conntrack: Bound nf_conntrack sysctl writes
netfilter: xt_hashlimit: replace vmalloc calls with kvmalloc
====================
Link: https://patch.msgid.link/20250323100922.59983-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFS is using two kinds of hash tables.
First one is controlled by /proc/sys/net/core/rps_sock_flow_entries = 2^N
and using the N low order bits of the l4 hash is good enough.
Then each RX queue has its own hash table, controlled by
/sys/class/net/eth1/queues/rx-$q/rps_flow_cnt = 2^X
Current hash function, using the X low order bits is suboptimal,
because RSS is usually using Func(hash) = (hash % power_of_two);
For example, with 32 RX queues, 6 low order bits have no entropy
for a given queue.
Switch this hash function to hash_32(hash, log) to increase
chances to use all possible slots and reduce collisions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250321171309.634100-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* cfg80211/mac80211: fix and enable link reconfiguration
* rtw88: support RTL8814AE/RTL8814AU
* mt7996: preparations for MLO
* ath12k: continued work on MLO
* iwlwifi: add new iwlmld sub-driver/op-mode for
some current and future devices
* wfx: wowlan support
-----BEGIN PGP SIGNATURE-----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=HSDM
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
More features for 6.15, major changes:
* cfg80211/mac80211: fix and enable link reconfiguration
* rtw88: support RTL8814AE/RTL8814AU
* mt7996: preparations for MLO
* ath12k: continued work on MLO
* iwlwifi: add new iwlmld sub-driver/op-mode for
some current and future devices
* wfx: wowlan support
* tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (311 commits)
wifi: mt76: mt7996: fix locking in mt7996_mac_sta_rc_work()
wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table
wifi: mt76: mt792x: re-register CHANCTX_STA_CSA only for the mt7921 series
wifi: mt76: mt7996: Update mt7996_tx to MLO support
wifi: mt76: mt7996: rework mt7996_ampdu_action to support MLO
wifi: mt76: mt7996: rework set/get_tsf callabcks to support MLO
wifi: mt76: mt7996: set vif default link_id adding/removing vif links
wifi: mt76: mt7996: rework mt7996_mcu_beacon_inband_discov to support MLO
wifi: mt76: mt7996: rework mt7996_mcu_add_obss_spr to support MLO
wifi: mt76: mt7996: rework mt7996_net_fill_forward_path to support MLO
wifi: mt76: mt7996: rework mt7996_update_mu_group to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_poll to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO
wifi: mt76: mt7996: remove mt7996_mac_enable_rtscts()
wifi: mt76: mt7996: rework mt7996_sta_hw_queue_read to support MLO
wifi: mt76: mt7996: rework mt7996_set_hw_key to support MLO
wifi: mt76: mt7996: Add mt7996_sta_link to mt7996_mcu_add_bss_info signature
wifi: mt76: mt7996: rework mt7996_sta_set_4addr and mt7996_sta_set_decap_offload to support MLO
wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO
wifi: mt76: mt7996: Rely on wcid_to_sta in mt7996_mac_add_txs_skb()
...
====================
Link: https://patch.msgid.link/20250320131106.33266-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following operations can trigger a warning[1]:
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode balance-rr
ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp
ip netns exec ns1 ip link set bond0 type bond mode broadcast
ip netns del ns1
When delete the namespace, dev_xdp_uninstall() is called to remove xdp
program on bond dev, and bond_xdp_set() will check the bond mode. If bond
mode is changed after attaching xdp program, the warning may occur.
Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode
with xdp program attached is not good. Add check for xdp program when set
bond mode.
[1]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930
Modules linked in:
CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Workqueue: netns cleanup_net
RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930
Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ...
RSP: 0018:ffffc90000063d80 EFLAGS: 00000282
RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff
RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48
RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb
R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8
R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000
FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0
Call Trace:
<TASK>
? __warn+0x83/0x130
? unregister_netdevice_many_notify+0x8d9/0x930
? report_bug+0x18e/0x1a0
? handle_bug+0x54/0x90
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? unregister_netdevice_many_notify+0x8d9/0x930
? bond_net_exit_batch_rtnl+0x5c/0x90
cleanup_net+0x237/0x3d0
process_one_work+0x163/0x390
worker_thread+0x293/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0xec/0x1e0
? __pfx_kthread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 9e2ee5c7e7 ("net, bonding: Add XDP support to the bonding driver")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Acked-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250321044852.1086551-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP uses generic skb_set_owner_r() and sock_rfree()
for received packets, with socket lock being owned.
Switch to private versions, avoiding two atomic operations
per packet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250320121604.3342831-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_rcv_core() is using:
__IP6_ADD_STATS(net, idev,
IPSTATS_MIB_NOECTPKTS +
(ipv6_get_dsfield(hdr) & INET_ECN_MASK),
max_t(unsigned short, 1, skb_shinfo(skb)->gso_segs));
This is currently evaluating both expressions twice.
Fix _DEVADD() and _DEVUPD() macros to evaluate their arguments once.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250319212516.2385451-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
include/net/af_unix.h indirectly includes some definitions for structs.
Let's include such headers explicitly.
linux/atomic.h : scm_stat.nr_fds
linux/net.h : unix_sock.peer_wq
linux/path.h : unix_sock.path
linux/spinlock.h : unix_sock.lock
linux/wait.h : unix_sock.peer_wake
uapi/linux/un.h : unix_address.name[]
linux/socket.h is removed as the structs there are not used directly,
and linux/un.h is clarified with uapi as un.h only exists under
include/uapi.
While at it, duplicate headers are removed from .c files.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250318034934.86708-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/af_unix.h is included by core and some LSMs, but most definitions
need not be.
Let's move struct unix_{vertex,edge} to net/unix/garbage.c and other
definitions to net/unix/af_unix.h.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250318034934.86708-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a prep patch to make the following changes cleaner.
No functional change intended.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250318034934.86708-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support adjusting/reading RTO MIN for socket level by using set/getsockopt().
This new option has the same effect as TCP_BPF_RTO_MIN, which means it
doesn't affect RTAX_RTO_MIN usage (by using ip route...). Considering that
bpf option was implemented before this patch, so we need to use a standalone
new option for pure tcp set/getsockopt() use.
When the socket is created, its icsk_rto_min is set to the default
value that is controlled by sysctl_tcp_rto_min_us. Then if application
calls setsockopt() with TCP_RTO_MIN_US flag to pass a valid value, then
icsk_rto_min will be overridden in jiffies unit.
This patch adds WRITE_ONCE/READ_ONCE to avoid data-race around
icsk_rto_min.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250317120314.41404-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently network taps unbound to any interface are linked in the
global ptype_all list, affecting the performance in all the network
namespaces.
Add per netns ptypes chains, so that in the mentioned case only
the netns owning the packet socket(s) is affected.
While at that drop the global ptype_all list: no in kernel user
registers a tap on "any" type without specifying either the target
device or the target namespace (and IMHO doing that would not make
any sense).
Note that this adds a conditional in the fast path (to check for
per netns ptype_specific list) and increases the dataset size by
a cacheline (owing the per netns lists).
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumaze@google.com>
Link: https://patch.msgid.link/ae405f98875ee87f8150c460ad162de7e466f8a7.1742494826.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90sDQAKCRCRxhvAZXjc
ooUnAQCaXv5U0GaEwkCcW78vw/dk7jyFG5LlrGUMvZV8MBSvuAEAsaPvU2uM6ZNf
743B8zOopOeX3Nwy8UKRcHk1nO1m5AY=
=NoZe
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs afs updates from Christian Brauner:
"This contains the work for afs for this cycle:
- Fix an occasional hang that's only really encountered when
rmmod'ing the kafs module
- Remove the "-o autocell" mount option. This is obsolete with the
dynamic root and removing it makes the next patch slightly easier
- Change how the dynamic root mount is constructed. Currently, the
root directory is (de)populated when it is (un)mounted if there are
cells already configured and, further, pairs of automount points
have to be created/removed each time a cell is added/deleted
This is changed so that readdir on the root dir lists all the known
cell automount pairs plus the @cell symlinks and the inodes and
dentries are constructed by lookup on demand. This simplifies the
cell management code
- A few improvements to the afs_volume and afs_server tracepoints
- Pass trace info into the afs_lookup_cell() function to allow the
trace log to indicate the purpose of the lookup
- Remove the 'net' parameter from afs_unuse_cell() as it's
superfluous
- In rxrpc, allow a kernel app (such as kafs) to store a word of
information on rxrpc_peer records
- Use the information stored on the rxrpc_peer record to point to the
afs_server record. This allows the server address lookup to be done
away with
- Simplify the afs_server ref/activity accounting to make each one
self-contained and not garbage collected from the cell management
work item
- Simplify the afs_cell ref/activity accounting to make each one of
these also self-contained and not driven by a central management
work item
The current code was intended to make it such that a single timer
for the namespace and one work item per cell could do all the work
required to maintain these records. This, however, made for some
sequencing problems when cleaning up these records. Further, the
attempt to pass refs along with timers and work items made getting
it right rather tricky when the timer or work item already had a
ref attached and now a ref had to be got rid of"
* tag 'vfs-6.15-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Simplify cell record handling
afs: Fix afs_server ref accounting
afs: Use the per-peer app data provided by rxrpc
rxrpc: Allow the app to store private data on peer structs
afs: Drop the net parameter from afs_unuse_cell()
afs: Make afs_lookup_cell() take a trace note
afs: Improve server refcount/active count tracing
afs: Improve afs_volume tracing to display a debug ID
afs: Change dynroot to create contents on demand
afs: Remove the "autocell" mount option
inet_connection_sock_af_ops.addr2sockaddr() hasn't been used at all
in the git era.
$ git grep addr2sockaddr $(git rev-list HEAD | tail -n 1)
Let's remove it.
Note that there was a 4 bytes hole after sockaddr_len and now it's
6 bytes, so the binary layout is not changed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250318060112.3729-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a followup of my presentation in Zagreb for netdev 0x19:
icsk_clean_acked is only used by TCP when/if CONFIG_TLS_DEVICE
is enabled from tcp_ack().
Rename it to tcp_clean_acked, move it to tcp_sock structure
in the tcp_sock_read_rx for better cache locality in TCP
fast path.
Define this field only when CONFIG_TLS_DEVICE is enabled
saving 8 bytes on configs not using it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250317085313.2023214-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Binding AX25 socket by using the autobind feature leads to memory leaks
in ax25_connect() and also refcount leaks in ax25_release(). Memory
leak was detected with kmemleak:
================================================================
unreferenced object 0xffff8880253cd680 (size 96):
backtrace:
__kmalloc_node_track_caller_noprof (./include/linux/kmemleak.h:43)
kmemdup_noprof (mm/util.c:136)
ax25_rt_autobind (net/ax25/ax25_route.c:428)
ax25_connect (net/ax25/af_ax25.c:1282)
__sys_connect_file (net/socket.c:2045)
__sys_connect (net/socket.c:2064)
__x64_sys_connect (net/socket.c:2067)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
================================================================
When socket is bound, refcounts must be incremented the way it is done
in ax25_bind() and ax25_setsockopt() (SO_BINDTODEVICE). In case of
autobind, the refcounts are not incremented.
This bug leads to the following issue reported by Syzkaller:
================================================================
ax25_connect(): syz-executor318 uses autobind, please contact jreuter@yaina.de
------------[ cut here ]------------
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 5317 at lib/refcount.c:31 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
Modules linked in:
CPU: 0 UID: 0 PID: 5317 Comm: syz-executor318 Not tainted 6.14.0-rc4-syzkaller-00278-gece144f151ac #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
...
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x6af/0x7e0 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4302 [inline]
netdev_put include/linux/netdevice.h:4319 [inline]
ax25_release+0x368/0x960 net/ax25/af_ax25.c:1080
__sock_release net/socket.c:647 [inline]
sock_close+0xbc/0x240 net/socket.c:1398
__fput+0x3e9/0x9f0 fs/file_table.c:464
__do_sys_close fs/open.c:1580 [inline]
__se_sys_close fs/open.c:1565 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1565
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Considering the issues above and the comments left in the code that say:
"check if we can remove this feature. It is broken."; "autobinding in this
may or may not work"; - it is better to completely remove this feature than
to fix it because it is broken and leads to various kinds of memory bugs.
Now calling connect() without first binding socket will result in an
error (-EINVAL). Userspace software that relies on the autobind feature
might get broken. However, this feature does not seem widely used with
this specific driver as it was not reliable at any point of time, and it
is already broken anyway. E.g. ax25-tools and ax25-apps packages for
popular distributions do not use the autobind feature for AF_AX25.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+33841dc6aa3e1d86b78a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=33841dc6aa3e1d86b78a
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
The void * cast in mctp_cb is unnecessary as it's already been done
at the start of the function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/Z9PwOQeBSYlgZlHq@gondor.apana.org.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace the legacy comperssion interface with the new acomp
interface. This is the first user to make full user of the
asynchronous nature of acomp by plugging into the existing xfrm
resume interface.
As a result of SG support by acomp, the linear scratch buffer
in ipcomp can be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case the fib match is used from the input hook we can avoid the fib
lookup if early demux assigned a socket for us: check that the input
interface matches sk-cached one.
Rework the existing 'lo bypass' logic to first check sk, then
for loopback interface type to elide the fib lookup.
This speeds up fib matching a little, before:
93.08 GBit/s (no rules at all)
75.1 GBit/s ("fib saddr . iif oif missing drop" in prerouting)
75.62 GBit/s ("fib saddr . iif oif missing drop" in input)
After:
92.48 GBit/s (no rules at all)
75.62 GBit/s (fib rule in prerouting)
90.37 GBit/s (fib rule in input).
Numbers for the 'no rules' and 'prerouting' are expected to
closely match in-between runs, the 3rd/input test case exercises the
the 'avoid lookup if cached ifindex in sk matches' case.
Test used iperf3 via veth interface, lo can't be used due to existing
loopback test.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad7 ("selftest: net: add proc_net_pktgen")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711ac ("selftests: net: Add test cases for link and peer netns")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429e ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similarly to net.mptcp.available_schedulers, this patch adds a new one
net.mptcp.available_path_managers to list the available path managers.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-11-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to allow users to develop their own BPF-based path manager,
this patch defines a struct ops "mptcp_pm_ops" for an MPTCP path
manager, which contains a set of interfaces. Currently only init()
and release() interfaces are included, subsequent patches will add
others step by step.
Add a set of functions to register, unregister, find and validate a
given path manager struct ops.
"list" is used to add this path manager to mptcp_pm_list list when
it is registered. "name" is used to identify this path manager.
mptcp_pm_find() uses "name" to find a path manager on the list.
mptcp_pm_unregister is not used in this set, but will be invoked in
.unreg of struct bpf_struct_ops. mptcp_pm_validate() will be invoked
in .validate of struct bpf_struct_ops. That's why they are exported.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-6-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- hci_event: Fix connection regression between LE and non-LE adapters
- Fix error code in chan_alloc_skb_cb()
-----BEGIN PGP SIGNATURE-----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=+VUv
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_event: Fix connection regression between LE and non-LE adapters
- Fix error code in chan_alloc_skb_cb()
* tag 'for-net-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Fix connection regression between LE and non-LE adapters
Bluetooth: Fix error code in chan_alloc_skb_cb()
====================
Link: https://patch.msgid.link/20250314163847.110069-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcp_in_quickack_mode() is called from input path for small packets.
It calls __sk_dst_get() which reads sk->sk_dst_cache which has been
put in sock_read_tx group (for good reasons).
Then dst_metric(dst, RTAX_QUICKACK) also needs extra cache line misses.
Cache RTAX_QUICKACK in icsk->icsk_ack.dst_quick_ack to no longer pull
these cache lines for the cases a delayed ACK is scheduled.
After this patch TCP receive path does not longer access sock_read_tx
group.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312083907.1931644-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the following patch, we no longer assume inet_frag_kill()
callers own a reference.
Consuming two refcounts from inet_frag_kill() would lead in UAF.
Propagate the pointer to the refs that will be consumed later
by the final inet_frag_putn() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
inet_frag_putn() can release multiple references
in one step.
Use it in inet_frags_free_cb().
Replace inet_frag_put(X) with inet_frag_putn(X, 1)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's quite common to have a single UDP tunnel type active in the
whole system. In such a case we can replace the indirect call for
the UDP tunnel GRO callback with a static call.
Add the related accounting in the control path and switch to static
call when possible. To keep the code simple use a static array for
the registered tunnel types, and size such array based on the kernel
config.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/6fd1f9c7651151493ecab174e7b8386a1534170d.1741718157.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most UDP tunnels bind a socket to a local port, with ANY address, no
peer and no interface index specified.
Additionally it's quite common to have a single tunnel device per
namespace.
Track in each namespace the UDP tunnel socket respecting the above.
When only a single one is present, store a reference in the netns.
When such reference is not NULL, UDP tunnel GRO lookup just need to
match the incoming packet destination port vs the socket local port.
The tunnel socket never sets the reuse[port] flag[s]. When bound to no
address and interface, no other socket can exist in the same netns
matching the specified local port.
Matching packets with non-local destination addresses will be
aggregated, and eventually segmented as needed - no behavior changes
intended.
Note that the UDP tunnel socket reference is stored into struct
netns_ipv4 for both IPv4 and IPv6 tunnels. That is intentional to keep
all the fastpath-related netns fields in the same struct and allow
cacheline-based optimization. Currently both the IPv4 and IPv6 socket
pointer share the same cacheline as the `udp_table` field.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/4d5c319c4471161829f50cb8436841de81a5edae.1741718157.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to GDMA protocol, holes (zeros) are allowed at the beginning
or middle of the gdma_list_devices_resp message. The existing code
cannot properly handle this, and may miss some devices in the list.
To fix, scan the entire list until the num_of_devs are found, or until
the end of the list.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@microsoft.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741723974-1534-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are a few conflicts between the work that went
into wireless and that's here now, resolve them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Accurate ECN needs to send custom flags to handle IP-ECN
field reflection during handshake.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ECN bits in TOS are always cleared when sending in ACKs in TW. Clearing
them is problematic for TCP flows that used Accurate ECN because ECN bits
decide which service queue the packet is placed into (L4S vs Classic).
Effectively, TW ACKs are always downgraded from L4S to Classic queue
which might impact, e.g., delay the ACK will experience on the path
compared with the other packets of the flow.
Change the TW ACK sending code to differentiate:
- In tcp_v4_send_reset(), commit ba9e04a7dd ("ip: fix tos reflection
in ack and reset packets") cleans ECN bits for TW reset and this is
not affected.
- In tcp_v4_timewait_ack(), ECN bits for all TW ACKs are cleaned. But now
only ECN bits of ACKs for oow data or paws_reject are cleaned, and ECN
bits of other ACKs will not be cleaned.
- In tcp_v4_reqsk_send_ack(), commit 66b13d99d9 ("ipv4: tcp: fix TOS
value in ACK messages sent from TIME_WAIT") did not clean ECN bits of
ACKs for oow data or paws_reject. But now the ECN bits rae cleaned for
these ACKs.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create helpers for TCP ECN modes. No functional changes.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With AccECN, there's one additional TCP flag to be used (AE)
and ACE field that overloads the definition of AE, CWR, and
ECE flags. As tcp_flags was previously only 1 byte, the
byte-order stuff needs to be added to it's handling.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use BIT() macro for TCP flags field and TCP congestion control
flags that will be used by the congestion control algorithm.
No functional changes.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Ilpo Järvinen <ij@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use TYPEOF_UNQUAL() to declare variables as a corresponding type without
named address space qualifier to avoid "`__seg_gs' specified for auto
variable `var'" errors.
Link: https://lkml.kernel.org/r/20250127160709.80604-4-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Nadav Amit <nadav.amit@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Due to a typo during defining HCI errors it is not possible to connect
LE-capable device with BR/EDR only adapter. The connection is terminated
by the LE adapter because the invalid LL params error code is treated
as unsupported remote feature.
Fixes: 79c0868ad6 ("Bluetooth: hci_event: Use HCI error defines instead of magic values")
Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change mana_get_primary_netdev_rcu() to mana_get_primary_netdev(), and
return the ndev with refcount held. The caller is responsible for dropping
the refcount.
Also drop the check for IFF_SLAVE as it is not necessary if the upper
device is present.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1741821332-9392-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
As we move away from rtnl_lock for queue ops, introduce
per-netdev_nl_sock lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No functional changes. Next patches will add more granular locking
to netdev_nl_sock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some regulatory bodies doesn't allow IR (initiate radioation) on a
specific subband, but allows it for channels with a bandwidth of 20 MHz.
Add a channel flag that indicates that, and consider it in
cfg80211_reg_check_beaconing.
While on it, fix the kernel doc of enum nl80211_reg_rule_flags and
change it to use BIT().
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Co-developed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.d3ab352a73ff.I8a8f79e1c9eb74936929463960ee2a324712fe51@changeid
[fix typo]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some extended MLD capabilities and operations bits (currently
the "BTM MLD Recommendataion For Multiple APs Support" bit)
may depend on userspace capabilities. Allow userspace to pass
the values for this field that it supports to the association
and link reconfiguration operations.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20250308225541.bd52078b5f65.I4dd8f53b0030db7ea87a2e0920989e7e2c7b5345@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Provide a way for the application (e.g. the afs filesystem) to store
private data on the rxrpc_peer structs for later retrieval via the call
object.
This will allow afs to store a pointer to the afs_server object on the
rxrpc_peer struct, thereby obviating the need for afs to keep lookup tables
by which it can associate an incoming call with server that transmitted it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-13-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-9-dhowells@redhat.com/ # v4
Move the more esoteric helpers for netdev instance lock to
a dedicated header. This avoids growing netdevice.h to infinity
and makes rebuilding the kernel much faster (after touching
the header with the helpers).
The main netdev_lock() / netdev_unlock() functions are used
in static inlines in netdevice.h and will probably be used
most commonly, so keep them in netdevice.h.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When introduced in commit 61723b3932 ("tcp: ulp: add functions to dump
ulp-specific information"), the whole ULP diag info has been exported
only if the requester had CAP_NET_ADMIN.
It looks like not everything is sensitive, and some info can be exported
to all users in order to ease the debugging from the userspace side
without requiring additional capabilities. Each layer should then decide
what can be exposed to everybody. The 'net_admin' boolean is then passed
to the different layers.
On kTLS side, it looks like there is nothing sensitive there: version,
cipher type, tx/rx user config type, plus some flags. So, only some
metadata about the configuration, no cryptographic info like keys, etc.
Then, everything can be exported to all users.
On MPTCP side, that's different. The MPTCP-related sequence numbers per
subflow should certainly not be exposed to everybody. For example, the
DSS mapping and ssn_offset would give all users on the system access to
narrow ranges of values for the subflow TCP sequence numbers and
MPTCP-level DSNs, and then ease packet injection. The TCP diag interface
doesn't expose the TCP sequence numbers for TCP sockets, so best to do
the same here. The rest -- token, IDs, flags -- can be exported to
everybody.
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250306-net-next-tcp-ulp-diag-net-admin-v1-2-06afdd860fc9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 4d94f05558 which has
problems (see [1]) and is no longer needed since 581dd2dc16
("Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating")
has reworked the code where the original bug has been found.
[1] Link: https://lore.kernel.org/linux-bluetooth/877c55ci1r.wl-tiwai@suse.de/T/#t
Fixes: 4d94f05558 ("Bluetooth: hci_core: Fix sleeping function called from invalid context")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The call to flush_work before tearing down a table from the netlink
notifier was supposed to make sure that all earlier updates (e.g. rule
add) that might reference that table have been processed.
Unfortunately, flush_work() waits for the last queued instance.
This could be an instance that is different from the one that we must
wait for.
This is because transactions are protected with a pernet mutex, but the
work item is global, so holding the transaction mutex doesn't prevent
another netns from queueing more work.
Make the work item pernet so that flush_work() will wait for all
transactions queued from this netns.
A welcome side effect is that we no longer need to wait for transaction
objects from foreign netns.
The gc work queue is still global. This seems to be ok because nft_set
structures are reference counted and each container structure owns a
reference on the net namespace.
The destroy_list is still protected by a global spinlock rather than
pernet one but the hold time is very short anyway.
v2: call cancel_work_sync before reaping the remaining tables (Pablo).
Fixes: 9f6958ba2e ("netfilter: nf_tables: unconditionally flush pending work before notifier")
Reported-by: syzbot+5d8c5789c8cb076b2c25@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
After blamed commit rtm_to_fib_config() now calls
lwtunnel_valid_encap_type{_attr}() without RTNL held,
triggering an unlock balance in __rtnl_unlock,
as reported by syzbot [1]
IPv6 and rtm_to_nh_config() are not yet converted.
Add a temporary @rtnl_is_held parameter to lwtunnel_valid_encap_type()
and lwtunnel_valid_encap_type_attr().
While we are at it replace the two rcu_dereference()
in lwtunnel_valid_encap_type() with more appropriate
rcu_access_pointer().
[1]
syz-executor245/5836 is trying to release lock (rtnl_mutex) at:
[<ffffffff89d0e38c>] __rtnl_unlock+0x6c/0xf0 net/core/rtnetlink.c:142
but there are no more locks to release!
other info that might help us debug this:
no locks held by syz-executor245/5836.
stack backtrace:
CPU: 0 UID: 0 PID: 5836 Comm: syz-executor245 Not tainted 6.14.0-rc4-syzkaller-00873-g3424291dd242 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_unlock_imbalance_bug+0x25b/0x2d0 kernel/locking/lockdep.c:5289
__lock_release kernel/locking/lockdep.c:5518 [inline]
lock_release+0x47e/0xa30 kernel/locking/lockdep.c:5872
__mutex_unlock_slowpath+0xec/0x800 kernel/locking/mutex.c:891
__rtnl_unlock+0x6c/0xf0 net/core/rtnetlink.c:142
lwtunnel_valid_encap_type+0x38a/0x5f0 net/core/lwtunnel.c:169
lwtunnel_valid_encap_type_attr+0x113/0x270 net/core/lwtunnel.c:209
rtm_to_fib_config+0x949/0x14e0 net/ipv4/fib_frontend.c:808
inet_rtm_newroute+0xf6/0x2a0 net/ipv4/fib_frontend.c:917
rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6919
netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:709 [inline]
Fixes: 1dd2af7963 ("ipv4: fib: Convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL.")
Reported-by: syzbot+3f18ef0f7df107a3f6a0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67c6f87a.050a0220.38b91b.0147.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250304125918.2763514-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When __inet_hash_connect() has to try many 4-tuples before
finding an available one, we see a high spinlock cost from
the many spin_lock_bh(&head->lock) performed in its loop.
This patch adds an RCU lookup to avoid the spinlock cost.
check_established() gets a new @rcu_lookup argument.
First reason is to not make any changes while head->lock
is not held.
Second reason is to not make this RCU lookup a second time
after the spinlock has been acquired.
Tested:
Server:
ulimit -n 40000; neper/tcp_crr -T 200 -F 30000 -6 --nolog
Client:
ulimit -n 40000; neper/tcp_crr -T 200 -F 30000 -6 --nolog -c -H server
Before series:
utime_start=0.288582
utime_end=1.548707
stime_start=20.637138
stime_end=2002.489845
num_transactions=484453
latency_min=0.156279245
latency_max=20.922042756
latency_mean=1.546521274
latency_stddev=3.936005194
num_samples=312537
throughput=47426.00
perf top on the client:
49.54% [kernel] [k] _raw_spin_lock
25.87% [kernel] [k] _raw_spin_lock_bh
5.97% [kernel] [k] queued_spin_lock_slowpath
5.67% [kernel] [k] __inet_hash_connect
3.53% [kernel] [k] __inet6_check_established
3.48% [kernel] [k] inet6_ehashfn
0.64% [kernel] [k] rcu_all_qs
After this series:
utime_start=0.271607
utime_end=3.847111
stime_start=18.407684
stime_end=1997.485557
num_transactions=1350742
latency_min=0.014131929
latency_max=17.895073144
latency_mean=0.505675853 # Nice reduction of latency metrics
latency_stddev=2.125164772
num_samples=307884
throughput=139866.80 # 190 % increase
perf top on client:
56.86% [kernel] [k] __inet6_check_established
17.96% [kernel] [k] __inet_hash_connect
13.88% [kernel] [k] inet6_ehashfn
2.52% [kernel] [k] rcu_all_qs
2.01% [kernel] [k] __cond_resched
0.41% [kernel] [k] _raw_spin_lock
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250302124237.3913746-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add RCU protection to inet_bind_bucket structure.
- Add rcu_head field to the structure definition.
- Use kfree_rcu() at destroy time, and remove inet_bind_bucket_destroy()
first argument.
- Use hlist_del_rcu() and hlist_add_head_rcu() methods.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250302124237.3913746-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
-----BEGIN PGP SIGNATURE-----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=KYXQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the sock version of kmemdup() helper, named sock_kmemdup(),
to duplicate the input "src" memory block using the socket's option memory
buffer.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/f828077394c7d1f3560123497348b438c875b510.1740735165.git.tanggeliang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP uses of dev_net() are under RCU protection, change them
to dev_net_rcu() to get LOCKDEP support.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use two existing drop reasons in tcp_check_req():
- TCP_RFC7323_PAWS
- TCP_OVERWINDOW
Add two new ones:
- TCP_RFC7323_TSECR (corresponds to LINUX_MIB_TSECRREJECTED)
- TCP_LISTEN_OVERFLOW (when a listener accept queue is full)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to add new drop reasons for packets dropped in 3WHS in the
following patches.
tcp_rcv_state_process() has to set reason to TCP_FASTOPEN,
because tcp_check_req() will conditionally overwrite the drop_reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL.
Then, we need to have per-netns hash tables for struct fib_info.
Let's allocate the hash tables per netns.
fib_info_hash, fib_info_hash_bits, and fib_info_cnt are now moved
to struct netns_ipv4 and accessed with net->ipv4.fib_XXX.
Also, the netns checks are removed from fib_find_info_nh() and
fib_find_info().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250228042328.96624-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will allocate fib_info_hash[] and fib_info_laddrhash[] for each netns.
Currently, fib_info_hash[] is allocated when the first route is added.
Let's move the first allocation to a new __net_init function.
Note that we must call fib4_semantics_exit() in fib_net_exit_batch()
because ->exit() is called earlier than ->exit_batch().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250228042328.96624-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, as multi-link operation(MLO) is not supported for mesh,
reorganize the sinfo structure for mesh-specific fields and embed
mesh related NL attributes together in organized view.
This will allow for the simplified reorganization of sinfo structure
for link level in a subsequent patch to add support for MLO station
statistics.
No functionality changes added.
Pahole summary before the reorg of sinfo structure:
- size: 256, cachelines: 4, members: 50
- sum members: 239, holes: 4, sum holes: 17
- paddings: 2, sum paddings: 2
- forced alignments: 1, forced holes: 1, sum forced holes: 1
Pahole summary after the reorg of sinfo structure:
- size: 248, cachelines: 4, members: 50
- sum members: 239, holes: 4, sum holes: 9
- paddings: 2, sum paddings: 2
- forced alignments: 1, last cacheline: 56 bytes
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250213171632.1646538-2-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
this week, so next week's PR is probably going to be bigger. A healthy
dose of fixes for bugs introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net()
RDMA driver register notifier after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue
with LED support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+Ci7
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
The only user was veth, which now uses napi_skb_cache_get_bulk().
It's now preferred over a direct allocation and is exported as
well, so remove this one.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make GRO init and cleanup functions global to be able to use GRO
without a NAPI instance. Taking into account already global gro_flush(),
it's now fully usable standalone.
New functions are not exported, since they're not supposed to be used
outside of the kernel core code.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In fact, these two are not tied closely to each other. The only
requirements to GRO are to use it in the BH context and have some
sane limits on the packet batches, e.g. NAPI has a limit of its
budget (64/8/etc.).
Move purely GRO fields into a new structure, &gro_node. Embed it
into &napi_struct and adjust all the references.
gro_node::cached_napi_id is effectively the same as
napi_struct::napi_id, but to be used on GRO hotpath to mark skbs.
napi_struct::napi_id is now a fully control path field.
Three Ethernet drivers use napi_gro_flush() not really meant to be
exported, so move it to <net/gro.h> and add that include there.
napi_gro_receive() is used in more than 100 drivers, keep it
in <linux/netdevice.h>.
This does not make GRO ready to use outside of the NAPI context
yet.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This information is exposed to userspace but not drivers. Make this
field public so that drivers are also able to access it. The information
is for example useful for link selection to determine whether the BSS
corresponding to an MLO link has been seen in a recent scan.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212082137.b682ee7aebc8.I0f7cca9effa2b1cee79f4f2eb8b549c99b4e0571@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is merge of shared branch between RDMA and net-next trees.
* mlx5-next: (550 commits)
net/mlx5: Change POOL_NEXT_SIZE define value and make it global
net/mlx5: Add new health syndrome error and crr bit offset
Linux 6.14-rc3
...
Signed-off-by: Leon Romanovsky <leon@kernel.org>
get_retrans() interface of the burst packet scheduler invokes a sleeping
function mptcp_pm_subflow_chk_stale(), which calls __lock_sock_fast().
So get_retrans() interface should be set with BPF_F_SLEEPABLE flag in
BPF. But get_send() interface of this scheduler can't be set with
BPF_F_SLEEPABLE flag since it's invoked in ack_update_msk() under mptcp
data lock.
So this patch has to split get_subflow() interface of packet scheduer into
two interfaces: get_send() and get_retrans(). Then we can set get_retrans()
interface alone with BPF_F_SLEEPABLE flag.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-8-2b70ab1cee79@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCZ7ffOQAKCRAraS+Z+3y5
EzVHAP9h/QkeYoOZW9gul08I8vFiZsFe/lbOSLJWxeVfxb9JhgD/cMqby3qAxQK6
lsdNQ9jYG2232Wym89ag7fvTBK15Wg4=
=gkN2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-02-20
We've added 19 non-merge commits during the last 8 day(s) which contain
a total of 35 files changed, 1126 insertions(+), 53 deletions(-).
The main changes are:
1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing
2) Add network TX timestamping support to BPF sock_ops, from Jason Xing
3) Add TX metadata Launch Time support, from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
igc: Add launch time support to XDP ZC
igc: Refactor empty frame insertion for launch time support
net: stmmac: Add launch time support to XDP ZC
selftests/bpf: Add launch time request to xdp_hw_metadata
xsk: Add launch time hardware offload support to XDP Tx metadata
selftests/bpf: Add simple bpf tests in the tx path for timestamping feature
bpf: Support selective sampling for bpf timestamping
bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback
net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING
bpf: Disable unsafe helpers in TX timestamping callbacks
bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback
bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: Add networking timestamping support to bpf_get/setsockopt()
selftests/bpf: Add rto max for bpf_setsockopt test
bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt
====================
Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that devices have been converted to use the specific netns instead
of ambiguous "net", let's remove it from newlink parameters.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-11-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When link_net is set, use it as link netns instead of dev_net(). This
prepares for rtnetlink core to create device in target netns directly,
in which case the two namespaces may be different.
Convert common ip_tunnel_newlink() to accept an extra link netns
argument.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-7-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two helper functions - rtnl_newlink_link_net() and
rtnl_newlink_peer_net() for netns fallback logic. Peer netns falls back
to link netns, and link netns falls back to source netns.
Convert the use of params->net in netdevice drivers to one of the helper
functions for clarity.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-4-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are 4 net namespaces involved when creating links:
- source netns - where the netlink socket resides,
- target netns - where to put the device being created,
- link netns - netns associated with the device (backend),
- peer netns - netns of peer device.
Currently, two nets are passed to newlink() callback - "src_net"
parameter and "dev_net" (implicitly in net_device). They are set as
follows, depending on netlink attributes in the request.
+------------+-------------------+---------+---------+
| peer netns | IFLA_LINK_NETNSID | src_net | dev_net |
+------------+-------------------+---------+---------+
| | absent | source | target |
| absent +-------------------+---------+---------+
| | present | link | link |
+------------+-------------------+---------+---------+
| | absent | peer | target |
| present +-------------------+---------+---------+
| | present | peer | link |
+------------+-------------------+---------+---------+
When IFLA_LINK_NETNSID is present, the device is created in link netns
first and then moved to target netns. This has some side effects,
including extra ifindex allocation, ifname validation and link events.
These could be avoided if we create it in target netns from
the beginning.
On the other hand, the meaning of src_net parameter is ambiguous. It
varies depending on how parameters are passed. It is the effective
link (or peer netns) by design, but some drivers ignore it and use
dev_net instead.
To provide more netns context for drivers, this patch packs existing
newlink() parameters, along with the source netns, link netns and peer
netns, into a struct. The old "src_net" is renamed to "net" to avoid
confusion with real source netns, and will be deprecated later. The use
of src_net are converted to params->net trivially.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In tunnel mode, for the packet offload, there were no PMTU signaling
to the upper level about need to fragment the packet. As a solution,
call to already existing xfrm[4|6]_tunnel_check_size() to perform that.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
SA replay mode is initialized differently for user-space and
kernel-space users, but the call to xfrm_init_replay() existed in
common path with boolean protection. That caused to situation where
we have two different function orders.
So let's rewrite the SA initialization flow to have same order for
both in-kernel and user-space callers.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
XFRM offload path is probed even if offload isn't needed at all. Let's
make sure that x->type_offload pointer stays NULL for such path to
reduce ambiguity.
Fixes: 9d389d7f84 ("xfrm: Add a xfrm type offload.")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
- Fix a soft-lockup in BPF arena_map_free on 64k page size
kernels (Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding
kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's
freeze_mutex (Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when
eth_skb_pkt_type is accessing skb data not containing an
Ethernet header (Shigeru Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch
(Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2)
in user space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ7evlRUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIPwHgD/dTvM00Ck4Q73fPivyT7tcqxeXJlD
D6ggzWl/SG9LAbwA/2/cSgAM9Jm1g7ddvn/S9QaDYOs5GmFl6urq6krs+tYD
=FCs9
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
Extend the XDP Tx metadata framework so that user can requests launch time
hardware offload, where the Ethernet device will schedule the packet for
transmission at a pre-determined time called launch time. The value of
launch time is communicated from user space to Ethernet driver via
launch_time field of struct xsk_tx_metadata.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250216093430.957880-2-yoong.siang.song@intel.com
Support the ACK case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_ACK_CB. This
callback will occur at the same timestamping point as the user
space's SCM_TSTAMP_ACK. The BPF program can use it to get the
same SCM_TSTAMP_ACK timestamp without modifying the user-space
application.
This patch extends txstamp_ack to two bits: 1 stands for
SO_TIMESTAMPING mode, 2 bpf extension.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-10-kerneljasonxing@gmail.com
The subsequent patch will implement BPF TX timestamping. It will
call the sockops BPF program without holding the sock lock.
This breaks the current assumption that all sock ops programs will
hold the sock lock. The sock's fields of the uapi's bpf_sock_ops
requires this assumption.
To address this, a new "u8 is_locked_tcp_sock;" field is added. This
patch sets it in the current sock_ops callbacks. The "is_fullsock"
test is then replaced by the "is_locked_tcp_sock" test during
sock_ops_convert_ctx_access().
The new TX timestamping callbacks added in the subsequent patch will
not have this set. This will prevent unsafe access from the new
timestamping callbacks.
Potentially, we could allow read-only access. However, this would
require identifying which callback is read-safe-only and also requires
additional BPF instruction rewrites in the covert_ctx. Since the BPF
program can always read everything from a socket (e.g., by using
bpf_core_cast), this patch keeps it simple and disables all read
and write access to any socket fields through the bpf_sock_ops
UAPI from the new TX timestamping callback.
Moreover, note that some of the fields in bpf_sock_ops are specific
to tcp_sock, and sock_ops currently only supports tcp_sock. In
the future, UDP timestamping will be added, which will also break
this assumption. The same idea used in this patch will be reused.
Considering that the current sock_ops only supports tcp_sock, the
variable is named is_locked_"tcp"_sock.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250220072940.99994-4-kerneljasonxing@gmail.com
This patch introduces a new bpf_skops_tx_timestamping() function
that prepares the "struct bpf_sock_ops" ctx and then executes the
sockops BPF program.
The subsequent patch will utilize bpf_skops_tx_timestamping() at
the existing TX timestamping kernel callbacks (__sk_tstamp_tx
specifically) to call the sockops BPF program. Later, four callback
points to report information to user space based on this patch will
be introduced.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250220072940.99994-3-kerneljasonxing@gmail.com
The new SK_BPF_CB_FLAGS and new SK_BPF_CB_TX_TIMESTAMPING are
added to bpf_get/setsockopt. The later patches will implement the
BPF networking timestamping. The BPF program will use
bpf_setsockopt(SK_BPF_CB_FLAGS, SK_BPF_CB_TX_TIMESTAMPING) to
enable the BPF networking timestamping on a socket.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-2-kerneljasonxing@gmail.com
Remove the hidden assumption that options are allocated at the end of
the struct, and teach the compiler about them using a flexible array.
With this, we can revert the unsafe_memcpy() call we have in
tun_dst_unclone() [1], and resolve the false field-spanning write
warning caused by the memcpy() in ip_tunnel_info_opts_set().
The layout of struct ip_tunnel_info remains the same with this patch.
Before this patch, there was an implicit padding at the end of the
struct, options would be written at 'info + 1' which is after the
padding.
This will remain the same as this patch explicitly aligns 'options'.
The alignment is needed as the options are later casted to different
structs, and might result in unaligned memory access.
Pahole output before this patch:
struct ip_tunnel_info {
struct ip_tunnel_key key; /* 0 64 */
/* XXX last struct has 1 byte of padding */
/* --- cacheline 1 boundary (64 bytes) --- */
struct ip_tunnel_encap encap; /* 64 8 */
struct dst_cache dst_cache; /* 72 16 */
u8 options_len; /* 88 1 */
u8 mode; /* 89 1 */
/* size: 96, cachelines: 2, members: 5 */
/* padding: 6 */
/* paddings: 1, sum paddings: 1 */
/* last cacheline: 32 bytes */
};
Pahole output after this patch:
struct ip_tunnel_info {
struct ip_tunnel_key key; /* 0 64 */
/* XXX last struct has 1 byte of padding */
/* --- cacheline 1 boundary (64 bytes) --- */
struct ip_tunnel_encap encap; /* 64 8 */
struct dst_cache dst_cache; /* 72 16 */
u8 options_len; /* 88 1 */
u8 mode; /* 89 1 */
/* XXX 6 bytes hole, try to pack */
u8 options[] __attribute__((__aligned__(16))); /* 96 0 */
/* size: 96, cachelines: 2, members: 6 */
/* sum members: 90, holes: 1, sum holes: 6 */
/* paddings: 1, sum paddings: 1 */
/* forced alignments: 1, forced holes: 1, sum forced holes: 6 */
/* last cacheline: 32 bytes */
} __attribute__((__aligned__(16)));
[1] Commit 13cfd6a6d7 ("net: Silence false field-spanning write warning in metadata_dst memcpy")
Link: https://lore.kernel.org/all/53D1D353-B8F6-4ADC-8F29-8C48A7C9C6F1@kernel.org/
Suggested-by: Kees Cook <kees@kernel.org>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250219143256.370277-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tunnel options should not be accessed directly, use the ip_tunnel_info()
accessor instead.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250219143256.370277-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina reported the following splat:
WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0
Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48
RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e
RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6
RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c
R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168
R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007
FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
gro_cells_init+0x1ba/0x270
xfrm_input_init+0x4b/0x2a0
xfrm_init+0x38/0x50
ip_rt_init+0x2d7/0x350
ip_init+0xf/0x20
inet_init+0x406/0x590
do_one_initcall+0x9d/0x2e0
do_initcalls+0x23b/0x280
kernel_init_freeable+0x445/0x490
kernel_init+0x20/0x1d0
ret_from_fork+0x46/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 584330
hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0
hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0
softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470
softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0
on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024)
is smaller than GRO_MAX_HEAD.
Such built additionally contains the revert of the single page frag cache
so that napi_get_frags() ends up using the page frag allocator, triggering
the splat.
Note that the underlying issue is independent from the mentioned
revert; address it ensuring that the small head cache will fit either TCP
and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb()
to select kmalloc() usage for any allocation fitting such cache.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 3948b05950 ("net: introduce a config option to tweak MAX_SKB_FRAGS")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while
running tests that boil down to:
- create a pair of netns
- run a basic TCP test over ipcomp6
- delete the pair of netns
The xfrm_state found on spi_byaddr was not deleted at the time we
delete the netns, because we still have a reference on it. This
lingering reference comes from a secpath (which holds a ref on the
xfrm_state), which is still attached to an skb. This skb is not
leaked, it ends up on sk_receive_queue and then gets defer-free'd by
skb_attempt_defer_free.
The problem happens when we defer freeing an skb (push it on one CPU's
defer_list), and don't flush that list before the netns is deleted. In
that case, we still have a reference on the xfrm_state that we don't
expect at this point.
We already drop the skb's dst in the TCP receive path when it's no
longer needed, so let's also drop the secpath. At this point,
tcp_filter has already called into the LSM hooks that may require the
secpath, so it should not be needed anymore. However, in some of those
places, the MPTCP extension has just been attached to the skb, so we
cannot simply drop all extensions.
Fixes: 68822bdf76 ("net: generalize skb freeing deferral to per-cpu lists")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/5055ba8f8f72bdcb602faa299faca73c280b7735.1739743613.git.sd@queasysnail.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After the previous patch we can remove the forward_alloc_get
proto callback, basically reverting commit 292e6077b0 ("net: introduce
sk_forward_alloc_get()") and commit 66d58f046c ("net: use
sk_forward_alloc_get() in sk_get_meminfo()").
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-5-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend IPv4 FIB rules to match on source and destination ports using a
mask. Note that the mask is only set when not matching on a range.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for configuring and deleting rules that match on source and
destination ports using a mask as well as support for dumping such rules
to user space.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This initializes tclass and dontfrag before cmsg parsing, removing the
need for explicit checks against -1 in each caller.
Leave hlimit set to -1, because its full initialization
(in ip6_sk_dst_hoplimit) requires more state (dst, flowi6, ..).
This also prepares for calling sockcm_init in a follow-on patch.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-7-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initialize the ip cookie tos field when initializing the cookie, in
ipcm_init_sk.
The existing code inverts the standard pattern for initializing cookie
fields. Default is to initialize the field from the sk, then possibly
overwrite that when parsing cmsgs (the unlikely case).
This field inverts that, setting the field to an illegal value and
after cmsg parsing checking whether the value is still illegal and
thus should be overridden.
Be careful to always apply mask INET_DSCP_MASK, as before.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-5-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid open coding initialization of sockcm fields.
Avoid reading the sk_priority field twice.
This ensures all callers, existing and future, will correctly try a
cmsg passed mark before sk_mark.
This patch extends support for cmsg mark to:
packet_spkt and packet_tpacket and net/can/raw.c.
This patch extends support for cmsg priority to:
packet_spkt and packet_tpacket.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice, iavf: Add support for Rx timestamping
Mateusz Polchlopek says:
Initially, during VF creation it registers the PTP clock in
the system and negotiates with PF it's capabilities. In the
meantime the PF enables the Flexible Descriptor for VF.
Only this type of descriptor allows to receive Rx timestamps.
Enabling virtual clock would be possible, though it would probably
perform poorly due to the lack of direct time access.
Enable timestamping should be done using userspace tools, e.g.
hwstamp_ctl -i $VF -r 14
In order to report the timestamps to userspace, the VF extends
timestamp to 40b.
To support this feature the flexible descriptors and PTP part
in iavf driver have been introduced.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: add support for Rx timestamps to hotpath
iavf: handle set and get timestamps ops
iavf: Implement checking DD desc field
iavf: refactor iavf_clean_rx_irq to support legacy and flex descriptors
iavf: define Rx descriptors as qwords
libeth: move idpf_rx_csum_decoded and idpf_rx_extracted
iavf: periodically cache PHC time
iavf: add support for indirect access to PHC time
iavf: add initial framework for registering PTP clock
iavf: negotiate PTP capabilities
iavf: add support for negotiating flexible RXDID format
virtchnl: add enumeration for the rxdid format
ice: support Rx timestamp on flex descriptor
virtchnl: add support for enabling PTP on iAVF
====================
Link: https://patch.msgid.link/20250214192739.1175740-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Creating empty nests is helpful when the exact attributes to be exposed
in the future are not known. Encapsulate the logic in a helper.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 6597e8d358 ("netdev-genl: Elide napi_id when not present"),
napi_id_valid function was added. Use the helper to refactor open-coded
checks in the source.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Stefano Jordhani <sjordhani@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk> # for iouring
Link: https://patch.msgid.link/20250214181801.931-1-sjordhani@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have many EXPORT_SYMBOL(x) in networking tree because IPv6
can be built as a module.
CONFIG_IPV6=y is becoming the norm.
Define a EXPORT_IPV6_MOD(x) which only exports x
for modular IPv6.
Same principle applies to EXPORT_IPV6_MOD_GPL()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250212132418.1524422-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Structs idpf_rx_csum_decoded and idpf_rx_extracted are used both in
idpf and iavf Intel drivers. Change the prefix from idpf_* to libeth_*
and move mentioned structs to libeth's rx.h header file.
Adjust usage in idpf driver.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After commit 5d4cc87414 ("net: reorganize "struct sock" fields"),
the sk_tsflags field shares the same cacheline with sk_forward_alloc.
The UDP protocol does not acquire the sock lock in the RX path;
forward allocations are protected via the receive queue spinlock;
additionally udp_recvmsg() calls sock_recv_cmsgs() unconditionally
touching sk_tsflags on each packet reception.
Due to the above, under high packet rate traffic, when the BH and the
user-space process run on different CPUs, UDP packet reception
experiences a cache miss while accessing sk_tsflags.
The receive path doesn't strictly need to access the problematic field;
change sock_set_timestamping() to maintain the relevant information
in a newly allocated sk_flags bit, so that sock_recv_cmsgs() can
take decisions accessing the latter field only.
With this patch applied, on an AMD epic server with i40e NICs, I
measured a 10% performance improvement for small packets UDP flood
performance tests - possibly a larger delta could be observed with more
recent H/W.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/dbd18c8a1171549f8249ac5a8b30b1b5ec88a425.1739294057.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 13c7c941e7 ("netdev: add qstat for csum complete") reserved
the entry for csum complete in the qstats uAPI. Start reporting this
value now that we have a driver which needs it.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250211181356.580800-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous patch added a TCP_RTO_MAX_MS socket option
to tune a TCP socket max RTO value.
Many setups prefer to change a per netns sysctl.
This patch adds /proc/sys/net/ipv4/tcp_rto_max_ms
Its initial value is 120000 (120 seconds).
Keep in mind that a decrease of tcp_rto_max_ms
means shorter overall timeouts, unless tcp_retries2
sysctl is increased.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, TCP stack uses a constant (120 seconds)
to limit the RTO value exponential growth.
Some applications want to set a lower value.
Add TCP_RTO_MAX_MS socket option to set a value (in ms)
between 1 and 120 seconds.
It is discouraged to change the socket rto max on a live
socket, as it might lead to unexpected disconnects.
Following patch is adding a netns sysctl to control the
default value at socket creation time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We want to factorize calls to inet_csk_reset_xmit_timer(),
to ease TCP_RTO_MAX change.
Current users want to add tcp_pacing_delay(sk)
to the timeout.
Remaining calls to inet_csk_reset_xmit_timer()
do not add the pacing delay. Following patch
will convert them, passing false for @pace_delay.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All callers use TCP_RTO_MAX, we can factorize this constant,
becoming a variable soon.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This will be used by the low level driver.
Note that link_id will be 0 in case of a non-MLO authentication.
Also fix a call-site of mgd_prepare_tx() where the link_id was not
populated.
Update the documentation to reflect the current state
ieee80211_prep_tx_info::link_id is also available in mgd_complete_tx().
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.6a590f189ce5.I1fc5c0da26b143f5b07191eb592f01f7083d55ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a strict mode where we disable certain workarounds and have
additional checks such as, for now, that VHT capabilities from
association response match those from beacon/probe response. We
can extend the checks in the future.
Make it an opt-in setting by the driver so it can be set there
in some driver-specific way, for example. Also allow setting
this one hw flag through the hwflags debugfs, by writing a new
strict=0 or strict=1 value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.5cecb0469479.I4a69617dc60ba0d6308416ffbc3102cfd08ba068@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for configuring EPCS state:
- When EPCS is enabled, send an EPCS enable request action frame
to the AP. When the AP replies with EPCS enable response, enable
EPCS by applying the QoS parameters provided by the AP. Do so for
all the valid MLD links. Once EPCS is enabled, support processing
of unsolicited EPCS enable response frames.
- When EPCS is disabled, send an EPCS teardown request to the AP
and apply the QoS parameters as obtained from the last received
beacons. Do so for all the valid links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.7a90afd7e140.I3f602d65f5c1fd849d6c70b12307dda33aa91ccb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Hostapd switched from cooked monitor interfaces to nl80211 Dec 2011.
Drop support for the outdated cooked monitor interfaces and fix
creating the virtual monitor interfaces in the following cases:
1) We have one non-monitor and one monitor interface with
%MONITOR_FLAG_ACTIVE enabled and then delete the non-monitor
interface.
2) We only have monitor interfaces enabled on resume while at least one
has %MONITOR_FLAG_ACTIVE set.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-2-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Unconditionally start to refuse creating cooked monitor interfaces to
phase them out.
There is no feature flag for drivers to opt-in for cooked monitor and
all known users are using/preferring the modern API since the hostapd
release 1.0 in May 2012.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
fib_nl_newrule() / fib_nl_delrule() is the doit() handler for
RTM_NEWRULE / RTM_DELRULE but also called from vrf_newlink().
Currently, we hold RTNL on both paths but will not on the former.
Also, we set dev_net(dev)->rtnl to skb->sk in vrf_fib_rule() because
fib_nl_newrule() / fib_nl_delrule() fetch net as sock_net(skb->sk).
Let's Factorise the two functions and pass net and rtnl_held flag.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
l3mdev_l3_out() can be called without RCU being held:
raw_sendmsg()
ip_push_pending_frames()
ip_send_skb()
ip_local_out()
__ip_local_out()
l3mdev_ip_out()
Add rcu_read_lock() / rcu_read_unlock() pair to avoid
a potential UAF.
Fixes: a8e3e1a9f0 ("net: l3mdev: Add hook to output path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when your driver supports XSk Tx metadata and you want to
send an XSk frame, you need to do the following:
* call external xsk_buff_raw_get_dma();
* call inline xsk_buff_get_metadata(), which calls external
xsk_buff_raw_get_data() and then do some inline checks.
This effectively means that the following piece:
addr = pool->unaligned ? xp_unaligned_add_offset_to_addr(addr) : addr;
is done twice per frame, plus you have 2 external calls per frame, plus
this:
meta = pool->addrs + addr - pool->tx_metadata_len;
if (unlikely(!xsk_buff_valid_tx_metadata(meta)))
is always inlined, even if there's no meta or it's invalid.
Add xsk_buff_raw_get_ctx() (xp_raw_get_ctx() to be precise) to do that
in one go. It returns a small structure with 2 fields: DMA address,
filled unconditionally, and metadata pointer, non-NULL only if it's
present and valid. The address correction is performed only once and
you also have only 1 external call per XSk frame, which does all the
calculations and checks outside of your hotpath. You only need to
check `if (ctx.meta)` for the metadata presence.
To not copy any existing code, derive address correction and getting
virtual and DMA address into small helpers. bloat-o-meter reports no
object code changes for the existing functionality.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250206182630.3914318-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the Castagnoli CRC32 is now always just crc32c(), rename
__crc32c_le_combine() and __crc32c_le_shift() accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
For historical reasons, the Castagnoli CRC32 is available under 3 names:
crc32c(), crc32c_le(), and __crc32c_le(). Most callers use crc32c().
The more verbose versions are not really warranted; there is no "_be"
version that the "_le" version needs to be differentiated from, and the
leading underscores are pointless.
Therefore, let's standardize on just crc32c(). Remove the other two
names, and update callers accordingly.
Specifically, the new crc32c() comes from what was previously
__crc32c_le(), so compared to the old crc32c() it now takes a size_t
length rather than unsigned int, and it's now in linux/crc32.h instead
of just linux/crc32c.h (which includes linux/crc32.h).
Later patches will also rename __crc32c_le_combine(), crc32c_le_base(),
and crc32c_le_arch().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
We seem to be missing a netif_running() check from the devmem
installation path. Starting a queue on a stopped device makes
no sense. We still want to be able to allocate the memory, just
to test that the device is indeed setting up the page pools
in a memory provider compatible way.
This is not a bug fix, because existing drivers check if
the interface is down as part of the ops. But new drivers
shouldn't have to do this, as long as they can correctly
alloc/free while down.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250206225638.1387810-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_csk_delete_keepalive_timer() and inet_csk_reset_keepalive_timer()
are only used from core TCP, there is no need to export them.
Replace their prefix by tcp.
Move them to net/ipv4/tcp_timer.c and make tcp_delete_keepalive_timer()
static.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250206094605.2694118-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are at least two cases where napi_id may not present and the
napi_id should be elided:
1. Queues could be created, but napi_enable may not have been called
yet. In this case, there may be a NAPI but it may not have an ID and
output of a napi_id should be elided.
2. TX-only NAPIs currently do not have NAPI IDs. If a TX queue happens
to be linked with a TX-only NAPI, elide the NAPI ID from the netlink
output as a NAPI ID of 0 is not useful for users.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205193751.297211-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Wei says:
====================
io_uring zero copy rx
This patchset contains net/ patches needed by a new io_uring request
implementing zero copy rx into userspace pages, eliminating a kernel
to user copy.
We configure a page pool that a driver uses to fill a hw rx queue to
hand out user pages instead of kernel pages. Any data that ends up
hitting this hw rx queue will thus be dma'd into userspace memory
directly, without needing to be bounced through kernel memory. 'Reading'
data out of a socket instead becomes a _notification_ mechanism, where
the kernel tells userspace where the data is. The overall approach is
similar to the devmem TCP proposal.
This relies on hw header/data split, flow steering and RSS to ensure
packet headers remain in kernel memory and only desired flows hit a hw
rx queue configured for zero copy. Configuring this is outside of the
scope of this patchset.
We share netdev core infra with devmem TCP. The main difference is that
io_uring is used for the uAPI and the lifetime of all objects are bound
to an io_uring instance. Data is 'read' using a new io_uring request
type. When done, data is returned via a new shared refill queue. A zero
copy page pool refills a hw rx queue from this refill queue directly. Of
course, the lifetime of these data buffers are managed by io_uring
rather than the networking stack, with different refcounting rules.
This patchset is the first step adding basic zero copy support. We will
extend this iteratively with new features e.g. dynamically allocated
zero copy areas, THP support, dmabuf support, improved copy fallback,
general optimisations and more.
In terms of netdev support, we're first targeting Broadcom bnxt. Patches
aren't included since Taehee Yoo has already sent a more comprehensive
patchset adding support in [1]. Google gve should already support this,
and Mellanox mlx5 support is WIP pending driver changes.
===========
Performance
===========
Note: Comparison with epoll + TCP_ZEROCOPY_RECEIVE isn't done yet.
Test setup:
* AMD EPYC 9454
* Broadcom BCM957508 200G
* Kernel v6.11 base [2]
* liburing fork [3]
* kperf fork [4]
* 4K MTU
* Single TCP flow
With application thread + net rx softirq pinned to _different_ cores:
+-------------------------------+
| epoll | io_uring |
|-----------|-------------------|
| 82.2 Gbps | 116.2 Gbps (+41%) |
+-------------------------------+
Pinned to _same_ core:
+-------------------------------+
| epoll | io_uring |
|-----------|-------------------|
| 62.6 Gbps | 80.9 Gbps (+29%) |
+-------------------------------+
=====
Links
=====
Broadcom bnxt support:
[1]: https://lore.kernel.org/20241003160620.1521626-8-ap420073@gmail.com
Linux kernel branch including io_uring bits:
[2]: https://github.com/isilence/linux.git zcrx/v13
liburing for testing:
[3]: https://github.com/isilence/liburing.git zcrx/next
kperf for testing:
[4]: https://git.kernel.dk/kperf.git
====================
Link: https://patch.msgid.link/20250204215622.695511-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers that properly prep or remove a memory provider for an rx
queue then restart the queue.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-11-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers for memory providers to interact with page pools.
net_mp_niov_{set,clear}_page_pool() serve to [dis]associate a net_iov
with a page pool. If used, the memory provider is responsible to match
"set" calls with "clear" once a net_iov is not going to be used by a page
pool anymore, changing a page pool, etc.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-10-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devmem TCP needs a hook in unregister_netdevice_many_notify() to upkeep
the set tracking queues it's bound to, i.e. ->bound_rxqs. Instead of
devmem sticking directly out of the genetic path, add a mp function.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-8-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a mandatory callback that prints information about the memory
provider to netlink.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-7-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A spin off from the original page pool memory providers patch by Jakub,
which allows extending page pools with custom allocators. One of such
providers is devmem TCP, and the other is io_uring zerocopy added in
following patches.
Link: https://lore.kernel.org/netdev/20230707183935.997267-7-kuba@kernel.org/
Co-developed-by: Jakub Kicinski <kuba@kernel.org> # initial mp proposal
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-5-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently net_iov stores a pointer to struct dmabuf_genpool_chunk_owner,
which serves as a useful abstraction to share data and provide a
context. However, it's too devmem specific, and we want to reuse it for
other memory providers, and for that we need to decouple net_iov from
devmem. Make net_iov to point to a new base structure called
net_iov_area, which dmabuf_genpool_chunk_owner extends.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_dst_mtu_maybe_forward() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: f87c10a8aa ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip4_dst_hoplimit() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: fa50d974d1 ("ipv4: Namespaceify ip_default_ttl sysctl knob")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev->nd_net can change, readers should either
use rcu_read_lock() or RTNL.
We currently use a generic helper, dev_net() with
no debugging support. We probably have many hidden bugs.
Add dev_net_rcu() helper for callers using rcu_read_lock()
protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the mana_ib_gd_query_adapter_caps function to retrieve and store
the feature_flags from the firmware response.
Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1738751713-16169-2-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In case of tc offload, when user space queries the kernel for tc action
statistics, tc will query the offloaded statistics from device drivers.
Among other statistics, drivers are expected to pass the number of
packets that hit the action since the last query as a 64-bit number.
Unfortunately, tc treats the number of packets as a 32-bit number,
leading to truncation and incorrect statistics when the number of
packets since the last query exceeds 0xffffffff:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 58 sec used 0 sec
Action statistics:
Sent 1133877034176 bytes 536959475 pkt (dropped 0, overlimits 0 requeues 0)
[...]
According to the above, 2111-byte packets were redirected which is
impossible as only 64-byte packets were transmitted and the MTU was
1500.
Fix by treating packets as a 64-bit number:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 61 sec used 0 sec
Action statistics:
Sent 1370624380864 bytes 21416005951 pkt (dropped 0, overlimits 0 requeues 0)
[...]
Which shows that only 64-byte packets were redirected (1370624380864 /
21416005951 = 64).
Fixes: 3804070235 ("net/sched: Enable netdev drivers to update statistics of offloaded actions")
Reported-by: Joe Botha <joe@atomic.ac>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250204123839.1151804-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rx/tx queues embed their own kobject for registering their per-queue
sysfs files. The issue is they're using the kobject default groups for
this and entirely rely on the kobject refcounting for releasing their
sysfs paths.
In order to remove rtnl_trylock calls we need sysfs files not to rely on
their associated kobject refcounting for their release. Thus we here
move queues sysfs files from the kobject default groups to their own
groups which can be removed separately.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-3-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement allocation of DMA-mapped memory regions.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-3-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow the HW to register DMA-mapped memory for kernel-level PDs.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-2-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
'sk->copied_seq' was updated in the tcp_eat_skb() function when the action
of a BPF program was SK_REDIRECT. For other actions, like SK_PASS, the
update logic for 'sk->copied_seq' was moved to tcp_bpf_recvmsg_parser()
to ensure the accuracy of the 'fionread' feature.
It works for a single stream_verdict scenario, as it also modified
sk_data_ready->sk_psock_verdict_data_ready->tcp_read_skb
to remove updating 'sk->copied_seq'.
However, for programs where both stream_parser and stream_verdict are
active (strparser purpose), tcp_read_sock() was used instead of
tcp_read_skb() (sk_data_ready->strp_data_ready->tcp_read_sock).
tcp_read_sock() now still updates 'sk->copied_seq', leading to duplicate
updates.
In summary, for strparser + SK_PASS, copied_seq is redundantly calculated
in both tcp_read_sock() and tcp_bpf_recvmsg_parser().
The issue causes incorrect copied_seq calculations, which prevent
correct data reads from the recv() interface in user-land.
We do not want to add new proto_ops to implement a new version of
tcp_read_sock, as this would introduce code complexity [1].
We could have added noack and copied_seq to desc, and then called
ops->read_sock. However, unfortunately, other modules didn’t fully
initialize desc to zero. So, for now, we are directly calling
tcp_read_sock_noack() in tcp_bpf.c.
[1]: https://lore.kernel.org/bpf/20241218053408.437295-1-mrpre@163.com
Fixes: e5c6de5fa0 ("bpf, sockmap: Incorrectly handling copied_seq")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-3-mrpre@163.com
Added a new read_sock handler, allowing users to customize read operations
instead of relying on the native socket's read_sock.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-2-mrpre@163.com
-----BEGIN PGP SIGNATURE-----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=pg+h
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-01-27
1) Fix incrementing the upper 32 bit sequence numbers for GSO skbs.
From Jianbo Liu.
2) Fix an out-of-bounds read on xfrm state lookup.
From Florian Westphal.
3) Fix secpath handling on packet offload mode.
From Alexandre Cassen.
4) Fix the usage of skb->sk in the xfrm layer.
5) Don't disable preemption while looking up cache state
to fix PREEMPT_RT.
From Sebastian Sewior.
* tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Don't disable preemption while looking up cache state.
xfrm: Fix the usage of skb->sk
xfrm: delete intermediate secpath entry in packet offload mode
xfrm: state: fix out-of-bounds read during lookup
xfrm: replay: Fix the update of replay_esn->oseq_hi for GSO
====================
Link: https://patch.msgid.link/20250127060757.3946314-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Page ppol tried to cache the NAPI ID in page pool info to avoid
having a dependency on the life cycle of the NAPI instance.
Since commit under Fixes the NAPI ID is not populated until
napi_enable() and there's a good chance that page pool is
created before NAPI gets enabled.
Protect the NAPI pointer with the existing page pool mutex,
the reading path already holds it. napi_id itself we need
to READ_ONCE(), it's protected by netdev_lock() which are
not holding in page pool.
Before this patch napi IDs were missing for mlx5:
# ./cli.py --spec netlink/specs/netdev.yaml --dump page-pool-get
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912},
{'id': 143, 'ifindex': 2, 'inflight': 5568, 'inflight-mem': 22806528},
{'id': 142, 'ifindex': 2, 'inflight': 5120, 'inflight-mem': 20971520},
{'id': 141, 'ifindex': 2, 'inflight': 4992, 'inflight-mem': 20447232},
...
After:
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912,
'napi-id': 565},
{'id': 143, 'ifindex': 2, 'inflight': 4224, 'inflight-mem': 17301504,
'napi-id': 525},
{'id': 142, 'ifindex': 2, 'inflight': 4288, 'inflight-mem': 17563648,
'napi-id': 524},
...
Fixes: 86e25f40aa ("net: napi: Add napi_config")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250123231620.1086401-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core
----
- More core refactoring to reduce the RTNL lock contention,
including preparatory work for the per-network namespace RTNL lock,
replacing RTNL lock with a per device-one to protect NAPI-related
net device data and moving synchronize_net() calls outside such
lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and
more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter
---------
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on
each restart.
Protocols
---------
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets,
to avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel
TLS (for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API
----------
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling
-----------------
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec,
to ease maintenance and future development.
- Add YNL support for decoding the link types used in net
self-tests, allowing a single build to run both net and
drivers/net.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues, affecting
both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station mode
support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hrsp
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
-----BEGIN PGP SIGNATURE-----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=fgyr
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Improved handling of LSM "secctx" strings through lsm_context struct
The LSM secctx string interface is from an older time when only one
LSM was supported, migrate over to the lsm_context struct to better
support the different LSMs we now have and make it easier to support
new LSMs in the future.
These changes explain the Rust, VFS, and networking changes in the
diffstat.
- Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are
enabled
Small tweak to be a bit smarter about when we build the LSM's common
audit helpers.
- Check for absurdly large policies from userspace in SafeSetID
SafeSetID policies rules are fairly small, basically just "UID:UID",
it easy to impose a limit of KMALLOC_MAX_SIZE on policy writes which
helps quiet a number of syzbot related issues. While work is being
done to address the syzbot issues through other mechanisms, this is a
trivial and relatively safe fix that we can do now.
- Various minor improvements and cleanups
A collection of improvements to the kernel selftests, constification
of some function parameters, removing redundant assignments, and
local variable renames to improve readability.
* tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: initialize local array before use to quiet static analysis
safesetid: check size of policy writes
net: corrections for security_secid_to_secctx returns
lsm: rename variable to avoid shadowing
lsm: constify function parameters
security: remove redundant assignment to return variable
lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set
selftests: refactor the lsm `flags_overset_lsm_set_self_attr` test
binder: initialize lsm_context structure
rust: replace lsm context+len with lsm_context
lsm: secctx provider check on release
lsm: lsm_context in security_dentry_init_security
lsm: use lsm_context in security_inode_getsecctx
lsm: replace context+len with lsm_context
lsm: ensure the correct LSM context releaser
We will convert rtnl_lock() with rtnl_net_lock(), and we want to
convert __in6_dev_get() too.
__in6_dev_get() uses rcu_dereference_rtnl(), but as written in its
comment, rtnl_dereference() or rcu_dereference() is preferable.
Let's add __in6_dev_get_rtnl_net() that uses rtnl_net_dereference().
We can add the RCU version helper later if needed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AASc
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Unbreak set size settings for rbtree set backend, intervals in
rbtree are represented as two elements, this detailed is leaked
to userspace leading to bogus ENOSPC from control plane.
2) Remove dead code in br_netfilter's br_nf_pre_routing_finish()
due to never matching error when looking up for route,
from Antoine Tenart.
3) Simplify check for device already in use in flowtable,
from Phil Sutter.
4) Three patches to restore interface name field in struct nft_hook
and use it, this is to prepare for wildcard interface support.
From Phil Sutter.
5) Do not remove netdev basechain when last device is gone, this is
for consistency with the flowtable behaviour. This allows for netdev
basechains without devices. Another patch to simplify netdev event
notifier after this update. Also from Phil.
6) Two patches to add missing spinlock when flowtable updates TCP
state flags, from Florian Westphal.
7) Simplify __nf_ct_refresh_acct() by removing skbuff parameter,
also from Florian.
8) Flowtable gc now extends ct timeout for offloaded flow. This
is to address a possible race that leads to handing over flow
to classic path with long ct timeouts.
9) Tear down flow if cached rt_mtu is stale, before this patch,
packet is handed over to classic path but flow entry still remained
in place.
10) Revisit the flowtable teardown strategy, which was originally
designed to release flowtable hardware entries early. Add a new
CLOSING flag that still allows hardware to release entries when
fin/rst is seen, but keeps the flow entry in place when the
TCP connection is closed. Release flow after timeout or when a new
syn packet is seen for TCP reopen scenario.
* tag 'nf-next-25-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: flowtable: add CLOSING state
netfilter: flowtable: teardown flow if cached mtu is stale
netfilter: conntrack: rework offload nf_conn timeout extension logic
netfilter: conntrack: remove skb argument from nf_ct_refresh
netfilter: nft_flow_offload: update tcp state flags under lock
netfilter: nft_flow_offload: clear tcp MAXACK flag before moving to slowpath
netfilter: nf_tables: Simplify chain netdev notifier
netfilter: nf_tables: Tolerate chains with no remaining hooks
netfilter: nf_tables: Compare netdev hooks based on stored name
netfilter: nf_tables: Use stored ifname in netdev hook dumps
netfilter: nf_tables: Store user-defined hook ifname
netfilter: nf_tables: Flowtable hook's pf value never varies
netfilter: br_netfilter: remove unused conditional and dead code
netfilter: nf_tables: fix set size with rbtree backend
====================
Link: https://patch.msgid.link/20250119172051.8261-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate the HDS config from the ethtool state struct.
The HDS config contains just simple parameters, not state.
Having it as a separate struct will make it easier to clone / copy
and also long term potentially make it per-queue.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
unix_dgram_disconnected() is called from two places:
1. when a connect()ed socket dis-connect()s or re-connect()s to
another socket
2. when sendmsg() fails because the peer socket that the client
has connect()ed to has been close()d
Then, the client's recv queue is purged to remove all messages from
the old peer socket.
Let's define a new drop reason for that case.
# echo 1 > /sys/kernel/tracing/events/skb/kfree_skb/enable
# python3
>>> from socket import *
>>>
>>> # s1 has a message from s2
>>> s1, s2 = socketpair(AF_UNIX, SOCK_DGRAM)
>>> s2.send(b'hello world')
>>>
>>> # re-connect() drops the message from s2
>>> s3 = socket(AF_UNIX, SOCK_DGRAM)
>>> s3.bind('')
>>> s1.connect(s3.getsockname())
# cat /sys/kernel/tracing/trace_pipe
python3-250 ... kfree_skb: ... location=skb_queue_purge_reason+0xdc/0x110 reason: UNIX_DISCONNECT
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AF_UNIX SOCK_STREAM socket supports MSG_OOB.
When OOB data is sent to a socket, recv() will break at that point.
If the next recv() does not have MSG_OOB, the normal data following
the OOB data is returned.
Then, the OOB skb is dropped.
Let's define a new drop reason for that case in manage_oob().
# echo 1 > /sys/kernel/tracing/events/skb/kfree_skb/enable
# python3
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX)
>>> s1.send(b'a', MSG_OOB)
>>> s1.send(b'b')
>>> s2.recv(2)
b'b'
# cat /sys/kernel/tracing/trace_pipe
...
python3-223 ... kfree_skb: ... location=unix_stream_read_generic+0x59e/0xc20 reason: UNIX_SKIP_OOB
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
unix_release_sock() is called when the last refcnt of struct file
is released.
Let's define a new drop reason SKB_DROP_REASON_SOCKET_CLOSE and
set it for kfree_skb() in unix_release_sock().
# echo 1 > /sys/kernel/tracing/events/skb/kfree_skb/enable
# python3
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX)
>>> s1.send(b'hello world')
>>> s2.close()
# cat /sys/kernel/tracing/trace_pipe
...
python3-280 ... kfree_skb: ... protocol=0 location=unix_release_sock+0x260/0x420 reason: SOCKET_CLOSE
To be precise, unix_release_sock() is also called for a new child
socket in unix_stream_connect() when something fails, but the new
sk does not have skb in the recv queue then and no event is logged.
Note that only tcp_inbound_ao_hash() uses a similar drop reason,
SKB_DROP_REASON_TCP_CLOSE, and this can be generalised later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following patch adds a new drop reason starting with
the SOCKET_ prefix.
Let's gather the existing SOCKET_ reasons.
Note that the order is not part of uAPI.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change resolves warning produced by sparse tool as currently
there is a mismatch between normal generic type in salt and endian
annotated type in macsec driver code. Endian annotated types should
be used here.
Sparse output:
warning: restricted ssci_t degrades to integer
warning: incorrect type in assignment (different base types)
expected restricted ssci_t [usertype] ssci
got unsigned int
warning: restricted __be64 degrades to integer
warning: incorrect type in assignment (different base types)
expected restricted __be64 [usertype] pn
got unsigned long long
Signed-off-by: Ales Nezbeda <anezbeda@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch addresses issues with filter counting in block (tcf_block),
particularly for software bypass scenarios, by introducing a more
accurate mechanism using useswcnt.
Previously, filtercnt and skipswcnt were introduced by:
Commit 2081fd3445 ("net: sched: cls_api: add filter counter") and
Commit f631ef39d8 ("net: sched: cls_api: add skip_sw counter")
filtercnt tracked all tp (tcf_proto) objects added to a block, and
skipswcnt counted tp objects with the skipsw attribute set.
The problem is: a single tp can contain multiple filters, some with skipsw
and others without. The current implementation fails in the case:
When the first filter in a tp has skipsw, both skipswcnt and filtercnt
are incremented, then adding a second filter without skipsw to the same
tp does not modify these counters because tp->counted is already set.
This results in bypass software behavior based solely on skipswcnt
equaling filtercnt, even when the block includes filters without
skipsw. Consequently, filters without skipsw are inadvertently bypassed.
To address this, the patch introduces useswcnt in block to explicitly count
tp objects containing at least one filter without skipsw. Key changes
include:
Whenever a filter without skipsw is added, its tp is marked with usesw
and counted in useswcnt. tc_run() now uses useswcnt to determine software
bypass, eliminating reliance on filtercnt and skipswcnt.
This refined approach prevents software bypass for blocks containing
mixed filters, ensuring correct behavior in tc_run().
Additionally, as atomic operations on useswcnt ensure thread safety and
tp->lock guards access to tp->usesw and tp->counted, the broader lock
down_write(&block->cb_lock) is no longer required in tc_new_tfilter(),
and this resolves a performance regression caused by the filter counting
mechanism during parallel filter insertions.
The improvement can be demonstrated using the following script:
# cat insert_tc_rules.sh
tc qdisc add dev ens1f0np0 ingress
for i in $(seq 16); do
taskset -c $i tc -b rules_$i.txt &
done
wait
Each of rules_$i.txt files above includes 100000 tc filter rules to a
mlx5 driver NIC ens1f0np0.
Without this patch:
# time sh insert_tc_rules.sh
real 0m50.780s
user 0m23.556s
sys 4m13.032s
With this patch:
# time sh insert_tc_rules.sh
real 0m17.718s
user 0m7.807s
sys 3m45.050s
Fixes: 047f340b36 ("net: sched: make skip_sw actually skip software")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp rst/fin packet triggers an immediate teardown of the flow which
results in sending flows back to the classic forwarding path.
This behaviour was introduced by:
da5984e510 ("netfilter: nf_flow_table: add support for sending flows back to the slow path")
b6f27d322a ("netfilter: nf_flow_table: tear down TCP flows if RST or FIN was seen")
whose goal is to expedite removal of flow entries from the hardware
table. Before these patches, the flow was released after the flow entry
timed out.
However, this approach leads to packet races when restoring the
conntrack state as well as late flow re-offload situations when the TCP
connection is ending.
This patch adds a new CLOSING state that is is entered when tcp rst/fin
packet is seen. This allows for an early removal of the flow entry from
the hardware table. But the flow entry still remains in software, so tcp
packets to shut down the flow are not sent back to slow path.
If syn packet is seen from this new CLOSING state, then this flow enters
teardown state, ct state is set to TCP_CONNTRACK_CLOSE state and packet
is sent to slow path, so this TCP reopen scenario can be handled by
conntrack. TCP_CONNTRACK_CLOSE provides a small timeout that aims at
quickly releasing this stale entry from the conntrack table.
Moreover, skip hardware re-offload from flowtable software packet if the
flow is in CLOSING state.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Offload nf_conn entries may not see traffic for a very long time.
To prevent incorrect 'ct is stale' checks during nf_conntrack table
lookup, the gc worker extends the timeout nf_conn entries marked for
offload to a large value.
The existing logic suffers from a few problems.
Garbage collection runs without locks, its unlikely but possible
that @ct is removed right after the 'offload' bit test.
In that case, the timeout of a new/reallocated nf_conn entry will
be increased.
Prevent this by obtaining a reference count on the ct object and
re-check of the confirmed and offload bits.
If those are not set, the ct is being removed, skip the timeout
extension in this case.
Parallel teardown is also problematic:
cpu1 cpu2
gc_worker
calls flow_offload_teardown()
tests OFFLOAD bit, set
clear OFFLOAD bit
ct->timeout is repaired (e.g. set to timeout[UDP_CT_REPLIED])
nf_ct_offload_timeout() called
expire value is fetched
<INTERRUPT>
-> NF_CT_DAY timeout for flow that isn't offloaded
(and might not see any further packets).
Use cmpxchg: if ct->timeout was repaired after the 2nd 'offload bit' test
passed, then ct->timeout will only be updated of ct->timeout was not
altered in between.
As we already have a gc worker for flowtable entries, ct->timeout repair
can be handled from the flowtable gc worker.
This avoids having flowtable specific logic in the conntrack core
and avoids checking entries that were never offloaded.
This allows to remove the nf_ct_offload_timeout helper.
Its safe to use in the add case, but not on teardown.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its not used (and could be NULL), so remove it.
This allows to use nf_ct_refresh in places where we don't have
an skb without having to double-check that skb == NULL would be safe.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Do not drop a netdev-family chain if the last interface it is registered
for vanishes. Users dumping and storing the ruleset upon shutdown to
restore it upon next boot may otherwise lose the chain and all contained
rules. They will still lose the list of devices, a later patch will fix
that. For now, this aligns the event handler's behaviour with that for
flowtables.
The controversal situation at netns exit should be no problem here:
event handler will unregister the hooks, core nftables cleanup code will
drop the chain itself.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Prepare for hooks with NULL ops.dev pointer (due to non-existent device)
and store the interface name and length as specified by the user upon
creation. No functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The existing rbtree implementation uses singleton elements to represent
ranges, however, userspace provides a set size according to the number
of ranges in the set.
Adjust provided userspace set size to the number of singleton elements
in the kernel by multiplying the range by two.
Check if the no-match all-zero element is already in the set, in such
case release one slot in the set size.
Fixes: 0ed6389c48 ("netfilter: nf_tables: rename set implementations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmeKvq8RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtJ3wf/bMRrED1k1xtC117yxBthXOZj7Ae0MG3s
cqIDBZ2MSmi596jfmc/FRFTN6Rie7+WQg8MGhpWpJt4WyvCd+IqmluLwuJGg3oHz
KdDQHN766cPb50mykTBY0m+Uh9eqyhaoozzK+KbrJZNLUt/Ri3DOdPInWP/ODKuT
uo9xv25zmOMQuUJlhOlFpOW68y6isuMsnPpgTvbtjndw3nPe+tVIfGPdg3xeQnq1
SG05wmOeJ8obmO1VsnmHPN20F5PfS5t2asu12UafR7KTiJOdP2QXKGNTy+ag7fQ/
9Sq6SzuPpbHHJJ93f0aJOkTUKdQVmk2xfCYNOyPNu1ewLqiVlvnkew==
=Vu+D
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Integrate with the standard infrastructure for reporting hardware packet
timestamping statistics.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- core: avoid CFI problems with sock priv helpers
- xsk: bring back busy polling support
- netpoll: ensure skb_pool list is always initialized
Current release - new code bugs:
- core: make page_pool_ref_netmem work with net iovs
- ipv4: route: fix drop reason being overridden in ip_route_input_slow
- udp: make rehash4 independent in udp_lib_rehash()
Previous releases - regressions:
- bpf: fix bpf_sk_select_reuseport() memory leak
- openvswitch: fix lockup on tx to unregistering netdev with carrier
- mptcp: be sure to send ack when mptcp-level window re-opens
- eth: bnxt: always recalculate features after XDP clearing, fix null-deref
- eth: mlx5: fix sub-function add port error handling
- eth: fec: handle page_pool_dev_alloc_pages error
Previous releases - always broken:
- vsock: some fixes due to transport de-assignment
- eth: ice: fix E825 initialization
- eth: mlx5e: fix inversion dependency warning while enabling IPsec tunnel
- eth: gtp: destroy device along with udp socket's netns dismantle.
- eth: xilinx: axienet: Fix IRQ coalescing packet count overflow
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=EtnO
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Notably this includes fixes for a few regressions spotted very
recently. No known outstanding ones.
Current release - regressions:
- core: avoid CFI problems with sock priv helpers
- xsk: bring back busy polling support
- netpoll: ensure skb_pool list is always initialized
Current release - new code bugs:
- core: make page_pool_ref_netmem work with net iovs
- ipv4: route: fix drop reason being overridden in
ip_route_input_slow
- udp: make rehash4 independent in udp_lib_rehash()
Previous releases - regressions:
- bpf: fix bpf_sk_select_reuseport() memory leak
- openvswitch: fix lockup on tx to unregistering netdev with carrier
- mptcp: be sure to send ack when mptcp-level window re-opens
- eth:
- bnxt: always recalculate features after XDP clearing, fix
null-deref
- mlx5: fix sub-function add port error handling
- fec: handle page_pool_dev_alloc_pages error
Previous releases - always broken:
- vsock: some fixes due to transport de-assignment
- eth:
- ice: fix E825 initialization
- mlx5e: fix inversion dependency warning while enabling IPsec
tunnel
- gtp: destroy device along with udp socket's netns dismantle.
- xilinx: axienet: Fix IRQ coalescing packet count overflow"
* tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netdev: avoid CFI problems with sock priv helpers
net/mlx5e: Always start IPsec sequence number from 1
net/mlx5e: Rely on reqid in IPsec tunnel mode
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
net/mlx5: Clear port select structure when fail to create
net/mlx5: SF, Fix add port error handling
net/mlx5: Fix a lockdep warning as part of the write combining test
net/mlx5: Fix RDMA TX steering prio
net: make page_pool_ref_netmem work with net iovs
net: ethernet: xgbe: re-add aneg to supported features in PHY quirks
net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII
net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband
selftests: net: Adapt ethtool mq tests to fix in qdisc graft
net: fec: handle page_pool_dev_alloc_pages error
net: netpoll: ensure skb_pool list is always initialized
net: xilinx: axienet: Fix IRQ coalescing packet count overflow
nfp: bpf: prevent integer overflow in nfp_bpf_event_output()
selftests: mptcp: avoid spurious errors on disconnect
mptcp: fix spurious wake-up on under memory pressure
mptcp: be sure to send ack when mptcp-level window re-opens
...
cleanup_net() is the single thread responsible
for netns dismantles, and a serious bottleneck.
Before we can get per-netns RTNL, make sure
all synchronize_net() called from this thread
are using rcu_synchronize_expedited().
v3: deal with CONFIG_NET_NS=n
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Link: https://patch.msgid.link/20250114205531.967841-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
page_pool_ref_netmem() should work with either netmem representation, but
currently it casts to a page with netmem_to_page(), which will fail with
net iovs. Use netmem_get_pp_ref_count_ref() instead.
Fixes: 8ab79ed50c ("page_pool: devmem support")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/20250108220644.3528845-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hdev->reset is never used now and the hdev->cmd_timeout actually
does reset. This patch changes the call path from
hdev->cmd_timeout -> vendor_cmd_timeout -> btusb_reset -> hdev->reset
, to
hdev->reset -> vendor_reset -> btusb_reset
Which makes it clear when we export the hdev->reset to a wider usage
e.g. allowing reset from sysfs.
This patch doesn't introduce any behavior change.
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_bdaddr_list_del_with_flags() was added in 2020's
commit 8baaa4038e ("Bluetooth: Add bdaddr_list_with_flags for classic
whitelist")
but has remained unused.
hci_remove_ext_adv_instance() was added in 2020's
commit eca0ae4aea ("Bluetooth: Add initial implementation of BIS
connections")
but has remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This marks LL Privacy as stable by removing its experimental UUID and
move its functionality to Device Flag (HCI_CONN_FLAG_ADDRESS_RESOLUTION)
which can be set by MGMT Device Set Flags so userspace retain control of
the feature.
Link: https://github.com/bluez/bluez/issues/1028
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Prior patch in the series added TCP_RFC7323_PAWS_ACK drop reason.
This patch adds the corresponding SNMP counter, for folks
using nstat instead of tracing for TCP diagnostics.
nstat -az | grep PAWSOldAck
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250113135558.3180360-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XPS can cause reorders because of the relaxed OOO
conditions for pure ACK packets.
For hosts not using RFS, what can happpen is that ACK
packets are sent on behalf of the cpu processing NIC
interrupts, selecting TX queue A for ACK packet P1.
Then a subsequent sendmsg() can run on another cpu.
TX queue selection uses the socket hash and can choose
another queue B for packets P2 (with payload).
If queue A is more congested than queue B,
the ACK packet P1 could be sent on the wire after
P2.
A linux receiver when processing P1 (after P2) currently increments
LINUX_MIB_PAWSESTABREJECTED (TcpExtPAWSEstab)
and use TCP_RFC7323_PAWS drop reason.
It might also send a DUPACK if not rate limited.
In order to better understand this pattern, this
patch adds a new drop_reason : TCP_RFC7323_PAWS_ACK.
For old ACKS like these, we no longer increment
LINUX_MIB_PAWSESTABREJECTED and no longer sends a DUPACK,
keeping credit for other more interesting DUPACK.
perf record -e skb:kfree_skb -a
perf script
...
swapper 0 [148] 27475.438637: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438706: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438908: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439010: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439214: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.439286: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
...
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250113135558.3180360-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6jpN
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains a small batch of Netfilter/IPVS updates
for net-next:
1) Remove unused genmask parameter in nf_tables_addchain()
2) Speed up reads from /proc/net/ip_vs_conn, from Florian Westphal.
3) Skip empty buckets in hashlimit to avoid atomic operations that results
in false positive reports by syzbot with lockdep enabled, patch from
Eric Dumazet.
4) Add conntrack event timestamps available via ctnetlink,
from Florian Westphal.
netfilter pull request 25-01-11
* tag 'nf-next-25-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: conntrack: add conntrack event timestamp
netfilter: xt_hashlimit: htable_selective_cleanup() optimization
ipvs: speed up reads from ip_vs_conn proc file
netfilter: nf_tables: remove the genmask parameter
====================
Link: https://patch.msgid.link/20250111230800.67349-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When in non-MLO mode, the key ID was set to -1 even for keys that are
not pairwise. Change the link ID to be the link ID of the deflink in
this case so that drivers do not need to special cases for this.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.0c066f084677.I4a5c288465e75119edb6a0df90dddf6f30d14a02@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for configuring Emergency Preparedness Communication
Services (EPCS) for station mode.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.ea54ac94445c.I11d750188bc0871e13e86146a3b5cc048d853e69@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the SAE_H2E selector already exists, which needs to be
implemented by the SME. As new such selectors might be added in the
future, add a feature to permit userspace to report a selector as
supported.
If not given, the kernel should assume that userspace does support
SAE_H2E.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.fe67b871cc39.Ieb98390328927e998e612345a58b6dbc00b0e3a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to save power, it can be desirable to change the
RX operating mode using OMI to reduce the bandwidth. As the
handshake must be done in the HTC+ field, it cannot be done
by mac80211 directly, so expose functions to the driver to
request and finalize the necessary updates.
Note that RX OMI really only changes what the peer (AP) will
transmit to us, but in order to use it to actually save some
power (by reducing the listen bandwidth) we also update rate
scaling and then the channel context's mindef accordingly.
The updates are split into two in order to sequence them
correctly, when reducing bandwidth first reduce the rate
scaling and thus TX, then send OMI, then reduce the listen
bandwidth (chandef); when increasing bandwidth this is the
other way around. This also requires tracking in different
variables which part is applicable already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.2c1a1934bd73.I4e90fd503504e37f9eac5bdae62e3f07e7071275@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the sequence goes like this (among others):
1. flush all stations (including the AP ones) -> this will tell the
drivers to remove the stations
2. notify the driver the vif is not associated.
Which means that in between 1 and 2, the state is that the vif is
associated, but there is no AP station, which makes no sense, and may be
problematic for some drivers (for example iwlwifi)
Change the sequence to:
1. flush the TDLS stations
2. move the AP station to IEEE80211_STA_NONE
3. notify the driver about the vif being unassociated
4. flush the AP station
In order to not break other drivers, add a vif flag to indicate whether
the driver wants to new sequence or not. If the flag is not set, then
things will be done in the old sequence.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.996ad1be6cb3.I7815d33415aa1d65c0120b54be7a15a45388f807@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 86e25f40aa ("net: napi: Add napi_config") moved napi->napi_id
assignment to a later point in time (napi_hash_add_with_id). This breaks
__xdp_rxq_info_reg which copies napi_id at an earlier time and now
stores 0 napi_id. It also makes sk_mark_napi_id_once_xdp and
__sk_mark_napi_id_once useless because they now work against 0 napi_id.
Since sk_busy_loop requires valid napi_id to busy-poll on, there is no way
to busy-poll AF_XDP sockets anymore.
Bring back the ability to busy-poll on XSK by resolving socket's napi_id
at bind time. This relies on relatively recent netif_queue_set_napi,
but (assume) at this point most popular drivers should have been converted.
This also removes per-tx/rx cycles which used to check and/or set
the napi_id value.
Confirmed by running a busy-polling AF_XDP socket
(github.com/fomichev/xskrtt) on mlx5 and looking at BusyPollRxPackets
from /proc/net/netstat.
Fixes: 86e25f40aa ("net: napi: Add napi_config")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250109003436.2829560-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ4EhtAAKCRCRxhvAZXjc
orToAQCIKKS7fk9j8CUSAdRG5mMy7Q++8OEVA+gyyMWuXnBPYwD/ehy+1xBVjCcI
FBzLadaJSuygjZVCzhVXsE0oRf4A2wg=
=waDA
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix the maximum cell name length
- Fix merge preference rule failure condition
fuse:
- Fix fuse_get_user_pages() so it doesn't risk misleading the caller
to think pages have been allocated when they actually haven't
- Fix direct-io folio offset and length calculation
netfs:
- Fix async direct-io handling
- Fix read-retry for filesystems that don't provide a
->prepare_read() method
vfs:
- Prevent truncating 64-bit offsets to 32-bits in iomap
- Fix memory barrier interactions when polling
- Remove MNT_ONRB to fix concurrent modification of @mnt->mnt_flags
leading to MNT_ONRB to not be raised and invalid access to a list
member"
* tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
poll: kill poll_does_not_wait()
sock_poll_wait: kill the no longer necessary barrier after poll_wait()
io_uring_poll: kill the no longer necessary barrier after poll_wait()
poll_wait: kill the obsolete wait_address check
poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()
afs: Fix merge preference rule failure condition
netfs: Fix read-retry for fs with no ->prepare_read()
netfs: Fix kernel async DIO
fs: kill MNT_ONRB
iomap: avoid avoid truncating 64-bit offset to 32 bits
afs: Fix the maximum cell name length
fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure
fuse: fix direct io folio offset and length calculation
Now that poll_wait() provides a full barrier we can remove smp_mb() from
sock_poll_wait().
Also, the poll_does_not_wait() check before poll_wait() just adds the
unnecessary confusion, kill it. poll_wait() does the same "p && p->_qproc"
check.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250107162736.GA18944@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmd/mNkACgkQrB3Eaf9P
W7cQww/9Hnv7+wosuBxFW2o2ptgZThiwj/Ovz0oiWGWvctpN7VlpwmrDOsXQ+XMn
xF6JBFEjnJanYoDBb78D0dMffJcMcUKZopTUU/ZMitSNr8aIHYiuB4SWPG1tqxl4
Ete7Mr2m3tS96YePQNnAaRZzEuGsx3BQb28VLTWl9So81MByD2OK4fsAbYz22Gg8
7A6tDHn1mUd9b2VG+LeeBZaDDFG8C0O2x4E/8Z3DX3z1N8y3LABPwZ38jcgTviKO
1ZldGrJT+PownBydu23bWDassKE2TuVvGH9e/SOPeQj8DJ4Lmd0bafMZTY6xwfNT
RJCwhlzZUpYRXFzvcf3+U3egsqEWEemV7/LzAapdT0V9OqfLWMUh3b1jMA4KcblZ
qmlm/MhZyXutDoeuASwtM4jgM3wGwovOofrKKsb13hD9VLBs5jFZmFSw5TlbmwE3
sjv7V4pFwNyfJnwQtyMmfuuHiy8w+fzqAA2GCg8mF3OosHABH/FOvEBP8xg1Vqu1
iKlLkByfyaCFD+GxTPzqSDvSB8nDzeZBgBM/ILGuwH0OWr+0gxBzl1sxrhAkw9hC
Gf+4J3wg7EknTxfrJk4LyqfyS50GvUIzpLSkHYxDtQRd4zv75bxRzMvoZvuapTtN
GGpWYftKO8n2kgLORQ0dTtFee3c4w/No+KXWsFdtRVNpyk3N0Yw=
=U79q
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2025-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-2025-01-09
1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality.
From Christian Hopps.
2) Support ESN context update to hardware for TX.
From Jianbo Liu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nadia Pinaeva writes:
I am working on a tool that allows collecting network performance
metrics by using conntrack events.
Start time of a conntrack entry is used to evaluate seen_reply
latency, therefore the sooner it is timestamped, the better the
precision is.
In particular, when using this tool to compare the performance of the
same feature implemented using iptables/nftables/OVS it is crucial
to have the entry timestamped earlier to see any difference.
At this time, conntrack events can only get timestamped at recv time in
userspace, so there can be some delay between the event being generated
and the userspace process consuming the message.
There is sys/net/netfilter/nf_conntrack_timestamp, which adds a
64bit timestamp (ns resolution) that records start and stop times,
but its not suited for this either, start time is the 'hashtable insertion
time', not 'conntrack allocation time'.
There is concern that moving the start-time moment to conntrack
allocation will add overhead in case of flooding, where conntrack
entries are allocated and released right away without getting inserted
into the hashtable.
Also, even if this was changed it would not with events other than
new (start time) and destroy (stop time).
Pablo suggested to add new CTA_TIMESTAMP_EVENT, this adds this feature.
The timestamp is recorded in case both events are requested and the
sys/net/netfilter/nf_conntrack_timestamp toggle is enabled.
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This change introduces a mechanism for notifying userspace
applications about changes to IPv6 anycast addresses via netlink. It
includes:
* Addition and deletion of IPv6 anycast addresses are reported using
RTM_NEWANYCAST and RTM_DELANYCAST.
* A new netlink group (RTNLGRP_IPV6_ACADDR) for subscribing to these
notifications.
This enables user space applications(e.g. ip monitor) to efficiently
track anycast addresses through netlink messages, improving metrics
collection and system monitoring. It also unlocks the potential for
advanced anycast management in user space, such as hardware offload
control and fine grained network control.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250107114355.1766086-1-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The get_mac_eee() is no longer called by the core DSA code, nor are
there any implementations of this method. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUllU-007UzL-KV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define inet_sk_dscp() to get a dscp_t value from struct inet_sock, so
that sctp_v4_get_dst() can easily set ->flowi4_tos from a dscp_t
variable. For the SCTP_DSCP_SET_MASK case, we can just use
inet_dsfield_to_dscp() to get a dscp_t value.
Then, when converting ->flowi4_tos from __u8 to dscp_t, we'll just have
to drop the inet_dscp_to_dsfield() conversion function.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/1a645f4a0bc60ad18e7c0916642883ce8a43c013.1735835456.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the backlog of listen() is set to zero, sk_acceptq_is_full() allows
one connection to be made, but inet_csk_reqsk_queue_is_full() does not.
When the net.ipv4.tcp_syncookies is zero, inet_csk_reqsk_queue_is_full()
will cause an immediate drop before the sk_acceptq_is_full() check in
tcp_conn_request(), resulting in no connection can be made.
This patch tries to keep consistent with 64a146513f ("[NET]: Revert
incorrect accept queue backlog changes.").
Link: https://lore.kernel.org/netdev/20250102080258.53858-1-kuniyu@amazon.com/
Fixes: ef547f2ac1 ("tcp: remove max_qlen_log")
Signed-off-by: Zhongqiu Duan <dzq.aishenghu0@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250102171426.915276-1-dzq.aishenghu0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
two-thirds of our normal weekly fix count, but delaying sending these
until -rc7 seemed like a really bad idea.
AFAIK we have no bugs under investigation. One or two reverts for
stuff for which we haven't gotten a proper fix will likely come in
the next PR.
Including fixes from wireles and netfilter.
Current release - fix to a fix:
- netfilter: nft_set_hash: unaligned atomic read on struct nft_set_ext
- eth: gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Previous releases - regressions:
- net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
- mptcp:
- fix sleeping rcvmsg sleeping forever after bad recvbuffer adjust
- fix TCP options overflow
- prevent excessive coalescing on receive, fix throughput
- net: fix memory leak in tcp_conn_request() if map insertion fails
- wifi: cw1200: fix potential NULL dereference after conversion
to GPIO descriptors
- phy: micrel: dynamically control external clock of KSZ PHY,
fix suspend behavior
Previous releases - always broken:
- af_packet: fix VLAN handling with MSG_PEEK
- net: restrict SO_REUSEPORT to inet sockets
- netdev-genl: avoid empty messages in NAPI get
- dsa: microchip: fix set_ageing_time function on KSZ9477 and LAN937X
- eth: gve: XDP fixes around transmit, queue wakeup etc.
- eth: ti: icssg-prueth: fix firmware load sequence to prevent time
jump which breaks timesync related operations
Misc:
- netlink: specs: mptcp: add missing attr and improve documentation
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YKS4
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireles and netfilter.
Nothing major here. Over the last two weeks we gathered only around
two-thirds of our normal weekly fix count, but delaying sending these
until -rc7 seemed like a really bad idea.
AFAIK we have no bugs under investigation. One or two reverts for
stuff for which we haven't gotten a proper fix will likely come in the
next PR.
Current release - fix to a fix:
- netfilter: nft_set_hash: unaligned atomic read on struct
nft_set_ext
- eth: gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Previous releases - regressions:
- net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
- mptcp:
- fix sleeping rcvmsg sleeping forever after bad recvbuffer adjust
- fix TCP options overflow
- prevent excessive coalescing on receive, fix throughput
- net: fix memory leak in tcp_conn_request() if map insertion fails
- wifi: cw1200: fix potential NULL dereference after conversion to
GPIO descriptors
- phy: micrel: dynamically control external clock of KSZ PHY, fix
suspend behavior
Previous releases - always broken:
- af_packet: fix VLAN handling with MSG_PEEK
- net: restrict SO_REUSEPORT to inet sockets
- netdev-genl: avoid empty messages in NAPI get
- dsa: microchip: fix set_ageing_time function on KSZ9477 and LAN937X
- eth:
- gve: XDP fixes around transmit, queue wakeup etc.
- ti: icssg-prueth: fix firmware load sequence to prevent time
jump which breaks timesync related operations
Misc:
- netlink: specs: mptcp: add missing attr and improve documentation"
* tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init
net: ti: icssg-prueth: Fix firmware load sequence.
mptcp: prevent excessive coalescing on receive
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()
mptcp: fix recvbuffer adjust on sleeping rcvmsg
ila: serialize calls to nf_register_net_hooks()
af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK
af_packet: fix vlan_get_tci() vs MSG_PEEK
net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()
net: restrict SO_REUSEPORT to inet sockets
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
net: sfc: Correct key_len for efx_tc_ct_zone_ht_params
net: wwan: t7xx: Fix FSM command timeout issue
sky2: Add device ID 11ab:4373 for Marvell 88E8075
mptcp: fix TCP options overflow.
net: mv643xx_eth: fix an OF node reference leak
gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
eth: bcmsysport: fix call balance of priv->clk handling routines
net: llc: reset skb->transport_header
netlink: specs: mptcp: fix missing doc
...
Current PF number description is vague, sometimes interpreted as
some PF index. VF number in the PCI specification starts at 1; however
in kernel, it starts at 0 for representor model.
Improve the description of devlink port attributes PF, VF and SF
numbers with these details.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://patch.msgid.link/20241224183706.26571-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bridge input code may drop frames for various reasons and at various
points in the ingress handling logic. Currently kfree_skb() is used
everywhere, and therefore no drop reason is specified. Add drop reasons
to the most common drop points.
Drop reasons are not added exhaustively to the entire bridge code. The
intention is to incrementally add drop reasons to the rest of the bridge
code in follow up patches.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241219163606.717758-3-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SKB_DROP_REASON_VXLAN_NO_REMOTE skb drop reason was introduced in
the specific context of vxlan. As it turns out, there are similar cases
when a packet needs to be dropped in other parts of the network stack,
such as the bridge module.
Rename SKB_DROP_REASON_VXLAN_NO_REMOTE and give it a more generic name,
so that it can be used in other parts of the network stack. This is not
a functional change, and the numeric value of the drop reason even
remains unchanged.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241219163606.717758-2-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv4 code commonly has to initialise a flowi4 structure from an IPv4
socket. This requires looking at potential IPv4 options to set the
proper destination address, call flowi4_init_output() with the correct
set of parameters and run the sk_classify_flow security hook.
Instead of reimplementing these operations in different parts of the
stack, let's define inet_sk_init_flowi4() which does all these
operations.
The first user is inet_sk_rebuild_header(), where inet_sk_init_flowi4()
replaces ip_route_output_ports(). Unlike ip_route_output_ports(), which
sets the flowi4 structure and performs the route lookup in one go,
inet_sk_init_flowi4() only initialises the flow. The route lookup is
then done by ip_route_output_flow(). Decoupling flow initialisation
from route lookup makes this new interface applicable more broadly as
it will allow some users to overwrite specific struct flowi4 members
before the route lookup.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/fd416275262b1f518d5abfcef740ce4f4a1a6522.1734357769.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When bpf_tcp_ingress() is called, the skmsg is being redirected to the
ingress of the destination socket. Therefore, we should charge its
receive socket buffer, instead of sending socket buffer.
Because sk_rmem_schedule() tests pfmemalloc of skb, we need to
introduce a wrapper and call it for skmsg.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241210012039.1669389-2-zijianzhang@bytedance.com
Same as with converting &xdp_buff to skb on Rx, the code which allocates
a new skb and copies the XSk frame there is identical across the
drivers, so make it generic. This includes copying all the frags if they
are present in the original buff.
System percpu page_pools greatly improve XDP_PASS performance on XSk:
instead of page_alloc() + page_free(), the net core recycles the same
pages, so the only overhead left is memcpy()s. When the Page Pool is
not compiled in, the whole function is a return-NULL (but it always
gets selected when eBPF is enabled).
Note that the passed buff gets freed if the conversion is done w/o any
error, assuming you don't need this buffer after you convert it to an
skb.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-6-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, xsk_buff_add_frag() only adds the frag to pool's linked list,
not doing anything with the &xdp_buff. The drivers do that manually and
the logic is the same.
Make it really add an skb frag, just like xdp_buff_add_frag() does that,
and freeing frags on error if needed. This allows to remove repeating
code from i40e and ice and not add the same code again and again.
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code which builds an skb from an &xdp_buff keeps multiplying itself
around the drivers with almost no changes. Let's try to stop that by
adding a generic function.
Unlike __xdp_build_skb_from_frame(), always allocate an skbuff head
using napi_build_skb() and make use of the available xdp_rxq pointer to
assign the Rx queue index. In case of PP-backed buffer, mark the skb to
be recycled, as every PP user's been switched to recycle skbs.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code piece which would attach a frag to &xdp_buff is almost
identical across the drivers supporting XDP multi-buffer on Rx.
Make it a generic elegant "oneliner".
Also, I see lots of drivers calculating frags_truesize as
`xdp->frame_sz * nr_frags`. I can't say this is fully correct, since
frags might be backed by chunks of different sizes, especially with
stuff like the header split. Even page_pool_alloc() can give you two
different truesizes on two subsequent requests to allocate the same
buffer size. Add a field to &skb_shared_info (unionized as there's no
free slot currently on x86_64) to track the "true" truesize. It can
be used later when updating the skb.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similarly to other _dev shorthands, add one for page_pool_alloc_netmem()
to allocate a netmem using the default Rx GFP flags (ATOMIC | NOWARN) to
make the page -> netmem transition of drivers easier.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already have enough variants of ip_route_output*() functions. We
don't need a GRE specific one in the generic route.h header file.
Furthermore, ip_route_output_gre() is only used once, in ipgre_open(),
where it can be easily replaced by a simple call to
ip_route_output_key().
While there, and for clarity, explicitly set .flowi4_scope to
RT_SCOPE_UNIVERSE instead of relying on the implicit zero
initialisation.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/ab7cba47b8558cd4bfe2dc843c38b622a95ee48e.1734527729.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
* define wiphy guard
* get TX power per link
* EHT 320 MHz channel support for mesh
ath11k
* QCA6698AQ support
ath9k
* RX inactivity detection
rtl8xxxu
* add more USB device IDs
rtw88
* add more USB device IDs
* enable USB RX aggregation and USB 3 to improve performance
rtw89
* PowerSave flow for Multi-Link Operation
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmdkbAoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuRIgf/dcjYr+eg3I7iU9qGxvEwHlDAC5CaMRwe
8+/SO6gy49xf6igleNQ2jBn/qAsJTiro6IzJwb1D6i16ax4TRUTEkTZSiYCzntKI
9Nkq59qhsRI4Vxrhp6NibUtVnjuRdSruVM5uLCccUCJ8tfq13WGhecR2pmV0TDO3
bRSza6L64XIuSmqHkuWS3Hz1YQvIvIZMeeiWoC35mtXg6ORRXpYloLtCzFn1zxoP
YPoeSfoAqIlaVwdB1DoaakU6is8oGZ0oI6zw/qaN8P7pYfqO62ATf6ZzAdwHE1dU
fow9nvwzln+BqgpdIK81QFR+XC+7LorCGSaQlYu6C0nxjSzycSrgOw==
=WIP7
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
- define wiphy guard
- get TX power per link
- EHT 320 MHz channel support for mesh
ath11k
- QCA6698AQ support
ath9k
- RX inactivity detection
rtl8xxxu
- add more USB device IDs
rtw88
- add more USB device IDs
- enable USB RX aggregation and USB 3 to improve performance
rtw89
- PowerSave flow for Multi-Link Operation
* tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits)
wifi: wlcore: sysfs: constify 'struct bin_attribute'
wifi: brcmfmac: clarify unmodifiable headroom log message
wifi: brcmfmac: add missing header include for brcmf_dbg
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()
wifi: qtnfmac: fix spelling error in core.h
wifi: rtw89: phy: add dummy C2H event handler for report of TAS power
wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read()
wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc()
wifi: rtlwifi: pci: wait for firmware loading before releasing memory
wifi: rtlwifi: fix memory leaks and invalid access at probe error path
wifi: rtlwifi: destroy workqueue at rtl_deinit_core
wifi: rtlwifi: remove unused check_buddy_priv
wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2
wifi: rtw89: regd: update regulatory map to R68-R51
wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ
wifi: rtw89: disable firmware training HE GI and LTF
wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS
wifi: rtw89: ps: refactor channel info to firmware before entering PS
wifi: rtw89: ps: refactor PS flow to support MLO
wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s
...
====================
Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: add support for devlink health events
Przemek Kitszel says:
Reports for two kinds of events are implemented, Malicious Driver
Detection (MDD) and Tx hang.
Patches 1, 2, 3: core improvements (checkpatch.pl, devlink extension)
Patch 4: rename current ice devlink/ files
Patches 5, 6, 7: ice devlink health infra + reporters
Mateusz did good job caring for this series, and hardening the code.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add MDD logging via devlink health
ice: add Tx hang devlink health reporter
ice: rename devlink_port.[ch] to port.[ch]
devlink: add devlink_fmsg_dump_skb() function
devlink: add devlink_fmsg_put() macro
checkpatch: don't complain on _Generic() use
====================
Link: https://patch.msgid.link/20241217210835.3702003-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
page_pool_is_last_ref() releases a reference while the name,
to me at least, suggests it just checks if the refcount is 1.
The semantics of the function are the same as those of
atomic_dec_and_test() and refcount_dec_and_test(), so just
use the _and_test() suffix.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20241215212938.99210-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add devlink_fmsg_dump_skb() function that adds some diagnostic
information about skb (like length, pkt type, MAC, etc) to devlink
fmsg mechanism using bunch of devlink_fmsg_put() function calls.
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add devlink_fmsg_put() that dispatches based on the type
of the value to put, example: bool -> devlink_fmsg_bool_pair_put().
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Linux socket API currently allows setting SO_PRIORITY at the
socket level, applying a uniform priority to all packets sent through
that socket. The exception to this is IP_TOS, when the priority value
is calculated during the handling of
ancillary data, as implemented in commit f02db315b8 ("ipv4: IP_TOS
and IP_TTL can be specified as ancillary data").
However, this is a computed
value, and there is currently no mechanism to set a custom priority
via control messages prior to this patch.
According to this patch, if SO_PRIORITY is specified as ancillary data,
the packet is sent with the priority value set through
sockc->priority, overriding the socket-level values
set via the traditional setsockopt() method. This is analogous to
the existing support for SO_MARK, as implemented in
commit c6af0c227a ("ip: support SO_MARK cmsg").
If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that
takes precedence is the last one in the cmsg list.
This patch has the side effect that raw_send_hdrinc now interprets cmsg
IP_TOS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a TLS handshake record carrying a KeyUpdate message is received,
all subsequent records will be encrypted with a new key. We need to
stop decrypting incoming records with the old key, and wait until
userspace provides a new key.
Make a note of this in the RX context just after decrypting that
record, and stop recvmsg/splice calls with EKEYEXPIRED until the new
key is available.
key_update_pending can't be combined with the existing bitfield,
because we will read it locklessly in ->poll.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change introduces netlink notifications for multicast address
changes. The following features are included:
* Addition and deletion of multicast addresses are reported using
RTM_NEWMULTICAST and RTM_DELMULTICAST messages with AF_INET and
AF_INET6.
* Two new notification groups: RTNLGRP_IPV4_MCADDR and
RTNLGRP_IPV6_MCADDR are introduced for receiving these events.
This change allows user space applications (e.g., ip monitor) to
efficiently track multicast group memberships by listening for netlink
events. Previously, applications relied on inefficient polling of
procfs, introducing delays. With netlink notifications, applications
receive realtime updates on multicast group membership changes,
enabling more precise metrics collection and system monitoring.
This change also unlocks the potential for implementing a wide range
of sophisticated multicast related features in user space by allowing
applications to combine kernel provided multicast address information
with user space data and communicate decisions back to the kernel for
more fine grained control. This mechanism can be used for various
purposes, including multicast filtering, IGMP/MLD offload, and
IGMP/MLD snooping.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Co-developed-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Link: https://lore.kernel.org/r/20180906091056.21109-1-pruddy@vyatta.att-mail.com
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dmabuf dma-addresses should not be dma_sync'd for CPU/device. Typically
its the driver responsibility to dma_sync for CPU, but the driver should
not dma_sync for CPU if the netmem is actually coming from a dmabuf
memory provider.
The page_pool already exposes a helper for dma_sync_for_cpu:
page_pool_dma_sync_for_cpu. Upgrade this existing helper to handle
netmem, and have it skip dma_sync if the memory is from a dmabuf memory
provider. Drivers should migrate to using this helper when adding
support for netmem.
Also minimize the impact on the dma syncing performance for pages. Special
case the dma-sync path for pages to not go through the overhead checks
for dma-syncing and conversion to netmem.
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20241211212033.1684197-5-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create page_pool_alloc_netmem to be the mirror of page_pool_alloc.
This enables drivers that want currently use page_pool_alloc to
transition to netmem by converting the call sites to
page_pool_alloc_netmem.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241211212033.1684197-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
page_pool_alloc_netmem (without an s) was the mirror of
page_pool_alloc_pages (with an s), which was confusing.
Rename to page_pool_alloc_netmems so it's the mirror of
page_pool_alloc_pages.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241211212033.1684197-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, __xdp_return() takes pointer to the virtual memory to free
a buffer. Apart from that this sometimes provokes redundant
data <--> page conversions, taking data pointer effectively prevents
lots of XDP code to support non-page-backed buffers, as there's no
mapping for the non-host memory (data is always NULL).
Just convert it to always take netmem reference. For
xdp_return_{buff,frame*}(), this chops off one page_address() per each
frag and adds one virt_to_netmem() (same as virt_to_page()) per header
buffer. For __xdp_return() itself, it removes one virt_to_page() for
MEM_TYPE_PAGE_POOL and another one for MEM_TYPE_PAGE_ORDER0, adding
one page_address() for [not really common nowadays]
MEM_TYPE_PAGE_SHARED, but the main effect is that the abovementioned
functions won't die or memleak anymore if the frame has non-host memory
attached and will correctly free those.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initially, xdp_frame::mem.id was used to search for the corresponding
&page_pool to return the page correctly.
However, after that struct page was extended to have a direct pointer
to its PP (netmem has it as well), further keeping of this field makes
no sense. xdp_return_frame_bulk() still used it to do a lookup, and
this leftover is now removed.
Remove xdp_frame::mem and replace it with ::mem_type, as only memory
type still matters and we need to know it to be able to free the frame
correctly.
As a cute side effect, we can now make every scalar field in &xdp_frame
of 4 byte width, speeding up accesses to them.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main reason for this change was to allow mixing pages from different
&page_pools within one &xdp_buff/&xdp_frame. Why not? With stuff like
devmem and io_uring zerocopy Rx, it's required to have separate PPs for
header buffers and payload buffers.
Adjust xdp_return_frame_bulk() and page_pool_put_netmem_bulk(), so that
they won't be tied to a particular pool. Let the latter create a
separate bulk of pages which's PP is different from the first netmem of
the bulk and process it after the main loop.
This greatly optimizes xdp_return_frame_bulk(): no more hashtable
lookups and forced flushes on PP mismatch. Also make
xdp_flush_frame_bulk() inline, as it's just one if + function call + one
u32 read, not worth extending the call ladder.
Co-developed-by: Toke Høiland-Jørgensen <toke@redhat.com> # iterative
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org> # while (count)
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add three qdisc-specific drop reasons and use them in sch_cake:
1) SKB_DROP_REASON_QDISC_OVERLIMIT
Whenever the total queue limit for a qdisc instance is exceeded
and a packet is dropped to make room.
2) SKB_DROP_REASON_QDISC_CONGESTED
Whenever a packet is dropped by the qdisc AQM algorithm because
congestion is detected.
3) SKB_DROP_REASON_CAKE_FLOOD
Whenever a packet is dropped by the flood protection part of the
CAKE AQM algorithm (BLUE).
Also use the existing SKB_DROP_REASON_QUEUE_PURGE in cake_clear_tin().
Reasons show up as:
perf record -a -e skb:kfree_skb sleep 1; perf script
iperf3 665 [005] 848.656964: skb:kfree_skb: skbaddr=0xffff98168a333500 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x10f0 reason: QDISC_OVERLIMIT
swapper 0 [001] 909.166055: skb:kfree_skb: skbaddr=0xffff98168280cee0 rx_sk=(nil) protocol=34525 location=cake_dequeue+0x5ef reason: QDISC_CONGESTED
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241211-cake-drop-reason-v2-1-920afadf4d1b@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
-----BEGIN PGP SIGNATURE-----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=1Po/
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
* tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
Bluetooth: Improve setsockopt() handling of malformed user input
====================
Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The voice setting is used by sco_connect() or sco_conn_defer_accept()
after being set by sco_sock_setsockopt().
The PCM part of the voice setting is used for offload mode through PCM
chipset port.
This commits add support for mSBC 16 bits offloading, i.e. audio data
not transported over HCI.
The BCM4349B1 supports 16 bits transparent data on its I2S port.
If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this
gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives
correct audio.
This has been tested with connection to iPhone 14 and Samsung S24.
Fixes: ad10b1a487 ("Bluetooth: Add Bluetooth socket voice option")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=JEfQ
-----END PGP SIGNATURE-----
Merge tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix bogus test reports in rpath.sh selftest by adding permanent
neighbor entries, from Phil Sutter.
2) Lockdep reports possible ABBA deadlock in xt_IDLETIMER, fix it by
removing sysfs out of the mutex section, also from Phil Sutter.
3) It is illegal to release basechain via RCU callback, for several
reasons. Keep it simple and safe by calling synchronize_rcu() instead.
This is a partially reverting a botched recent attempt of me to fix
this basechain release path on netdevice removal.
From Florian Westphal.
netfilter pull request 24-12-11
* tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: do not defer rule destruction via call_rcu
netfilter: IDLETIMER: Fix for possible ABBA deadlock
selftests: netfilter: Stabilize rpath.sh
====================
Link: https://patch.msgid.link/20241211230130.176937-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Provide a trivial implementation for the .support_eee() method which
switch drivers can use to simply indicate that they support EEE on
all their user ports.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL149-006cZJ-JJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a hook to determine whether the switch supports EEE. This will
return false if the switch does not, or true if it does. If the
method is not implemented, we assume (currently) that the switch
supports EEE.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/E1tL144-006cZD-El@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Today we have a hardcoded delay of 1 sec before a TIME-WAIT socket can be
reused by reopening a connection. This is a safe choice based on an
assumption that the other TCP timestamp clock frequency, which is unknown
to us, may be as low as 1 Hz (RFC 7323, section 5.4).
However, this means that in the presence of short lived connections with an
RTT of couple of milliseconds, the time during which a 4-tuple is blocked
from reuse can be orders of magnitude longer that the connection lifetime.
Combined with a reduced pool of ephemeral ports, when using
IP_LOCAL_PORT_RANGE to share an egress IP address between hosts [1], the
long TIME-WAIT reuse delay can lead to port exhaustion, where all available
4-tuples are tied up in TIME-WAIT state.
Turn the reuse delay into a per-netns setting so that sysadmins can make
more aggressive assumptions about remote TCP timestamp clock frequency and
shorten the delay in order to allow connections to reincarnate faster.
Note that applications can completely bypass the TIME-WAIT delay protection
already today by locking the local port with bind() before connecting. Such
immediate connection reuse may result in PAWS failing to detect old
duplicate segments, leaving us with just the sequence number check as a
safety net.
This new configurable offers a trade off where the sysadmin can balance
between the risk of PAWS detection failing to act versus exhausting ports
by having sockets tied up in TIME-WAIT state for too long.
[1] https://lpc.events/event/16/contributions/1349/
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20241209-jakub-krn-909-poc-msec-tw-tstamp-v2-2-66aca0eed03e@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare ground for TIME-WAIT socket reuse with subsecond delay.
Today the last TS.Recent update timestamp, recorded in seconds and stored
tp->ts_recent_stamp and tw->tw_ts_recent_stamp fields, has two purposes.
Firstly, it is used to track the age of the last recorded TS.Recent value
to detect when that value becomes outdated due to potential wrap-around of
the other TCP timestamp clock (RFC 7323, section 5.5).
For this purpose a second-based timestamp is completely sufficient as even
in the worst case scenario of a peer using a high resolution microsecond
timestamp, the wrap-around interval is ~36 minutes long.
Secondly, it serves as a threshold value for allowing TIME-WAIT socket
reuse. A TIME-WAIT socket can be reused only once the virtual 1 Hz clock,
ktime_get_seconds, is past the TS.Recent update timestamp.
The purpose behind delaying the TIME-WAIT socket reuse is to wait for the
other TCP timestamp clock to tick at least once before reusing the
connection. It is only then that the PAWS mechanism for the reopened
connection can detect old duplicate segments from the previous connection
incarnation (RFC 7323, appendix B.2).
In this case using a timestamp with second resolution not only blocks the
way toward allowing faster TIME-WAIT reuse after shorter subsecond delay,
but also makes it impossible to reliably delay TW reuse by one second.
As Eric Dumazet has pointed out [1], due to timestamp rounding, the TW
reuse delay will actually be between (0, 1] seconds, and 0.5 seconds on
average. We delay TW reuse for one full second only when last TS.Recent
update coincides with our virtual 1 Hz clock tick.
Considering the above, introduce a dedicated field to store a millisecond
timestamp of transition into the TIME-WAIT state. Place it in an existing
4-byte hole inside inet_timewait_sock structure to avoid an additional
memory cost.
Use the new timestamp to (i) reliably delay TIME-WAIT reuse by one second,
and (ii) prepare for configurable subsecond reuse delay in the subsequent
change.
We assume here that a full one second delay was the original intention in
[2] because it accounts for the worst case scenario of the other TCP using
the slowest recommended 1 Hz timestamp clock.
A more involved alternative would be to change the resolution of the last
TS.Recent update timestamp, tw->tw_ts_recent_stamp, to milliseconds.
[1] https://lore.kernel.org/netdev/CANn89iKB4GFd8sVzCbRttqw_96o3i2wDhX-3DraQtsceNGYwug@mail.gmail.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b8439924316d5bcb266d165b93d632a4b4b859af
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20241209-jakub-krn-909-poc-msec-tw-tstamp-v2-1-66aca0eed03e@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nf_tables_chain_destroy can sleep, it can't be used from call_rcu
callbacks.
Moreover, nf_tables_rule_release() is only safe for error unwinding,
while transaction mutex is held and the to-be-desroyed rule was not
exposed to either dataplane or dumps, as it deactives+frees without
the required synchronize_rcu() in-between.
nft_rule_expr_deactivate() callbacks will change ->use counters
of other chains/sets, see e.g. nft_lookup .deactivate callback, these
must be serialized via transaction mutex.
Also add a few lockdep asserts to make this more explicit.
Calling synchronize_rcu() isn't ideal, but fixing this without is hard
and way more intrusive. As-is, we can get:
WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x..
Workqueue: events nf_tables_trans_destroy_work
RIP: 0010:nft_set_destroy+0x3fe/0x5c0
Call Trace:
<TASK>
nf_tables_trans_destroy_work+0x6b7/0xad0
process_one_work+0x64a/0xce0
worker_thread+0x613/0x10d0
In case the synchronize_rcu becomes an issue, we can explore alternatives.
One way would be to allocate nft_trans_rule objects + one nft_trans_chain
object, deactivate the rules + the chain and then defer the freeing to the
nft destroy workqueue. We'd still need to keep the synchronize_rcu path as
a fallback to handle -ENOMEM corner cases though.
Reported-by: syzbot+b26935466701e56cfdc2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67478d92.050a0220.253251.0062.GAE@google.com/T/
Fixes: c03d278fdf ("netfilter: nf_tables: wait for rcu grace period on net_device removal")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The bt_copy_from_sockptr() return value is being misinterpreted by most
users: a non-zero result is mistakenly assumed to represent an error code,
but actually indicates the number of bytes that could not be copied.
Remove bt_copy_from_sockptr() and adapt callers to use
copy_safe_from_sockptr().
For sco_sock_setsockopt() (case BT_CODEC) use copy_struct_from_sockptr() to
scrub parts of uninitialized buffer.
Opportunistically, rename `len` to `optlen` in hci_sock_setsockopt_old()
and hci_sock_setsockopt().
Fixes: 51eda36d33 ("Bluetooth: SCO: Fix not validating setsockopt user input")
Fixes: a97de7bff1 ("Bluetooth: RFCOMM: Fix not validating setsockopt user input")
Fixes: 4f3951242a ("Bluetooth: L2CAP: Fix not validating setsockopt user input")
Fixes: 9e8742cdfc ("Bluetooth: ISO: Fix not validating setsockopt user input")
Fixes: b2186061d6 ("Bluetooth: hci_sock: Fix not validating setsockopt user input")
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
- avoid CSA warnings during link removal
(by changing link bitmap after remove)
- fix # of spatial streams initialisation
- fix queues getting stuck in some CSA cases
and resume failures
- fix interface address when switching monitor mode
- fix MBSS change flags 32-bit stack corruption
- more UBSAN __counted_by "fixes" ...
- fix link ID netlink validation
-----BEGIN PGP SIGNATURE-----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=qo16
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
A small set of fixes:
- avoid CSA warnings during link removal
(by changing link bitmap after remove)
- fix # of spatial streams initialisation
- fix queues getting stuck in some CSA cases
and resume failures
- fix interface address when switching monitor mode
- fix MBSS change flags 32-bit stack corruption
- more UBSAN __counted_by "fixes" ...
- fix link ID netlink validation
* tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: sme: init n_channels before channels[] access
wifi: mac80211: fix station NSS capability initialization order
wifi: mac80211: fix vif addr when switching from monitor to station
wifi: mac80211: fix a queue stall in certain cases of CSA
wifi: mac80211: wake the queues in case of failure in resume
wifi: cfg80211: clear link ID from bitmap during link delete after clean up
wifi: mac80211: init cnt before accessing elem in ieee80211_copy_mbssid_beacon
wifi: mac80211: fix mbss changed flags corruption on 32 bit systems
wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one
====================
Link: https://patch.msgid.link/20241210130145.28618-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to make it possible to configure which bits in VXLAN header should
be considered reserved, introduce a new field vxlan_config::reserved_bits.
Have it cover the whole header, except for the VNI-present bit and the bits
for VNI itself, and have individual enabled features clear more bits off
reserved_bits.
(This is expressed as first constructing a used_bits set, and then
inverting it to get the reserved_bits. The set of used_bits will be useful
on its own for validation of user-set reserved_bits in a following patch.)
The patch also moves a comment relevant to the validation from the unparsed
validation site up to the new site. Logically this patch should add the new
comment, and a later patch that removes the unparsed bits would remove the
old comment. But keeping both legs in the same patch is better from the
history spelunking point of view.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/984dbf98d5940d3900268dbffaf70961f731d4a4.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kernel-doc -Wall warns about missing Return: statement for non-void
functions. We have a number of kdocs in our headers which are missing
the colon, IOW they use
* Return some value
or
* Returns some value
Having the colon makes some sense, it should help kdoc parser avoid
false positives. So add them. This is mostly done with a sed script,
and removing the unnecessary cases (mostly the comments which aren't
kdoc).
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20241205165914.1071102-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, page_pool_put_page_bulk() indeed takes an array of pointers
to the data, not pages, despite the name. As one side effect, when
you're freeing frags from &skb_shared_info, xdp_return_frame_bulk()
converts page pointers to virtual addresses and then
page_pool_put_page_bulk() converts them back. Moreover, data pointers
assume every frag is placed in the host memory, making this function
non-universal.
Make page_pool_put_page_bulk() handle array of netmems. Pass frag
netmems directly and use virt_to_netmem() when freeing xdpf->data,
so that the PP core will then get the compound netmem and take care
of the rest.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241203173733.3181246-9-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following netmem counterparts:
* virt_to_netmem() -- simple page_to_netmem(virt_to_page()) wrapper;
* netmem_is_pfmemalloc() -- page_is_pfmemalloc() for page-backed
netmems, false otherwise;
and the following "unsafe" versions:
* __netmem_to_page()
* __netmem_get_pp()
* __netmem_address()
They do the same as their non-underscored buddies, but assume the netmem
is always page-backed. When working with header &page_pools, you don't
need to check whether netmem belongs to the host memory and you can
never get NULL instead of &page. Checks for the LSB, clearing the LSB,
branches take cycles and increase object code size, sometimes
significantly. When you're sure your PP is always host, you can avoid
this by using the underscored counterparts.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241203173733.3181246-8-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One may need to register memory model separately from xdp_rxq_info. One
simple example may be XDP test run code, but in general, it might be
useful when memory model registering is managed by one layer and then
XDP RxQ info by a different one.
Allow such scenarios by adding a simple helper which "attaches"
already registered memory model to the desired xdp_rxq_info. As this
is mostly needed for Page Pool, add a special function to do that for
a &page_pool pointer.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241203173733.3181246-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lots of read-only helpers for &xdp_buff and &xdp_frame, such as getting
the frame length, skb_shared_info etc., don't have their arguments
marked with `const` for no reason. Add the missing annotations to leave
less place for mistakes and more for optimization.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241203173733.3181246-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the series "XSk buff on a diet" by Maciej, the greatest pow-2
which &xdp_buff_xsk can be divided got reduced from 16 to 8 on x86_64.
Also, sizeof(xdp_buff_xsk) now is 120 bytes, which, taking the previous
sentence into account, leads to that it leaves 8 bytes at the end of
cacheline, which means an array of buffs will have its elements
messed between the cachelines chaotically.
Use __aligned_largest for this struct. This alignment is usually 16
bytes, which makes it fill two full cachelines and align an array
nicely. ___cacheline_aligned may be excessive here, especially on
arches with 128-256 byte CLs, as well as 32-bit arches (76 -> 96
bytes on MIPS32R2), while not doing better than _largest.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241203173733.3181246-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth: bnxt_en: support header page pool in queue API
- eth: ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth: mlxsw: use correct key block on Spectrum-4
- eth: mlx5: fix memory leak in mlx5hws_definer_calc_layout
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=nkPk
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
-----BEGIN PGP SIGNATURE-----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=3N6k
-----END PGP SIGNATURE-----
Merge tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix esoteric undefined behaviour due to uninitialized stack access
in ip_vs_protocol_init(), from Jinghao Jia.
2) Fix iptables xt_LED slab-out-of-bounds due to incorrect sanitization
of the led string identifier, reported by syzbot. Patch from
Dmitry Antipov.
3) Remove WARN_ON_ONCE reachable from userspace to check for the maximum
cgroup level, nft_socket cgroup matching is restricted to 255 levels,
but cgroups allow for INT_MAX levels by default. Reported by syzbot.
4) Fix nft_inner incorrect use of percpu area to store tunnel parser
context with softirqs, resulting in inconsistent inner header
offsets that could lead to bogus rule mismatches, reported by syzbot.
5) Grab module reference on ipset core while requesting set type modules,
otherwise kernel crash is possible by removing ipset core module,
patch from Phil Sutter.
6) Fix possible double-free in nft_hash garbage collector due to unstable
walk interator that can provide twice the same element. Use a sequence
number to skip expired/dead elements that have been already scheduled
for removal. Based on patch from Laurent Fasnach
netfilter pull request 24-12-05
* tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
netfilter: nft_inner: incorrect percpu area handling under softirq
netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level
netfilter: x_tables: fix LED ID check in led_tg_check()
ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init()
====================
Link: https://patch.msgid.link/20241205002854.162490-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add static inline dst_dev_overhead() function to include/net/dst.h. This
helper function is used by ioam6_iptunnel, rpl_iptunnel and
seg6_iptunnel to get the dev's overhead based on a cache entry
(dst_entry). If the cache is empty, the default and generic value
skb->mac_len is returned. Otherwise, LL_RESERVED_SPACE() over dst's dev
is returned.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Define `XFRM_MODE_IPTFS` and `IPSEC_MODE_IPTFS` constants, and add these to
switch case and conditionals adjacent with the existing TUNNEL modes.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add a set of callbacks xfrm_mode_cbs to xfrm_state. These callbacks
enable the addition of new xfrm modes, such as IP-TFS to be defined
in modules.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Replace the (secctx,seclen) pointer pair with a single
lsm_context pointer to allow return of the LSM identifier
along with the context and context length. This allows
security_release_secctx() to know how to release the
context. Callers have been modified to use or save the
returned data from the new structure.
security_secid_to_secctx() and security_lsmproc_to_secctx()
will now return the length value on success instead of 0.
Cc: netdev@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak, kdoc fix, signedness fix from Dan Carpenter]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a new lsm_context data structure to hold all the information about a
"security context", including the string, its size and which LSM allocated
the string. The allocation information is necessary because LSMs have
different policies regarding the lifecycle of these strings. SELinux
allocates and destroys them on each use, whereas Smack provides a pointer
to an entry in a list that never goes away.
Update security_release_secctx() to use the lsm_context instead of a
(char *, len) pair. Change its callers to do likewise. The LSMs
supporting this hook have had comments added to remind the developer
that there is more work to be done.
The BPF security module provides all LSM hooks. While there has yet to
be a known instance of a BPF configuration that uses security contexts,
the possibility is real. In the existing implementation there is
potential for multiple frees in that case.
Cc: linux-integrity@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
To: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: linux-nfs@vger.kernel.org
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
ML interfaces can have multiple affiliated links to it and
hence there is a need to report tx power of specified link
rather deflink.
Add changes to report tx power of requested link from mac80211,
also pass link id as an argument in get_tx_power op so that supported
drivers can use it to report link's tx power.
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20241125083217.216095-3-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, TX power is reported on interface/wdev level as
part of NL80211_CMD_GET_INTERFACE. With MLO, Multiple links
can be part of an interface/wdev and hence its necessary to
report the TX power of each link.
Add support to send tx power for all valid links of an MLD as
part of NL80211_CMD_GET_INTERFACE request.
As far as userspace is concerned, there is no behavioral change
for Non-ML Interfaces. For ML interfaces, userspace should fetch
TX power that is nested inside NL80211_ATTR_MLO_LINKS, similar to
how channel info(NL80211_ATTR_WIPHY_FREQ) is fetched.
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20241125083217.216095-2-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Define a guard for the wiphy mutex, and use it in
most code in cfg80211, though not all due to some
interaction with RTNL and/or indentation.
Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241122094225.88765cbaab65.I610c9b14f36902e75e1d13f0db29f8bef2298804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Softirq can interrupt ongoing packet from process context that is
walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner
header offsets to validate that the percpu area is valid for this
skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff
has already been parsed before for inner header fetching to
register.
2) Validate that the percpu area refers to this skbuff using the
skbuff pointer as a cookie. If there is a cookie mismatch, then
this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack
copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the
percpu area.
Fixes: 3a07327d10 ("netfilter: nft_inner: support for inner tunnel header matching")
Reported-by: syzbot+84d0441b9860f0d63285@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since adding support for opting out of virtual monitor support, a zero vif
addr was used to indicate passive vs active monitor to the driver.
This would break the vif->addr when changing the netdev mac address before
switching the interface from monitor to sta mode.
Fix the regression by adding a separate flag to indicate whether vif->addr
is valid.
Reported-by: syzbot+9ea265d998de25ac6a46@syzkaller.appspotmail.com
Fixes: 9d40f7e327 ("wifi: mac80211: add flag to opt out of virtual monitor support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20241115115850.37449-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we got an unprotected action frame with CSA and then we heard the
beacon with the CSA IE, we'll block the queues with the CSA reason
twice. Since this reason is refcounted, we won't wake up the queues
since we wake them up only once and the ref count will never reach 0.
This led to blocked queues that prevented any activity (even
disconnection wouldn't reset the queue state and the only way to recover
would be to reload the kernel module.
Fix this by not refcounting the CSA reason.
It becomes now pointless to maintain the csa_blocked_queues state.
Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: 414e090bc4 ("wifi: mac80211: restrict public action ECSA frame handling")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241119173108.5ea90828c2cc.I4f89e58572fb71ae48e47a81e74595cac410fbac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
-----BEGIN PGP SIGNATURE-----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=GDKD
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
gitignore: Don't ignore 'tags' directory
kbuild: add dependency from vmlinux to resolve_btfids
modpost: replace tdb_hash() with hash_str()
kbuild: deb-pkg: add python3:native to build dependency
genksyms: reduce indentation in export_symbol()
modpost: improve error messages in device_id_check()
modpost: rename alias symbol for MODULE_DEVICE_TABLE()
modpost: rename variables in handle_moddevtable()
modpost: move strstarts() to modpost.h
modpost: convert do_usb_table() to a generic handler
modpost: convert do_of_table() to a generic handler
modpost: convert do_pnp_device_entry() to a generic handler
modpost: convert do_pnp_card_entries() to a generic handler
modpost: call module_alias_printf() from all do_*_entry() functions
modpost: pass (struct module *) to do_*_entry() functions
modpost: remove DEF_FIELD_ADDR_VAR() macro
modpost: deduplicate MODULE_ALIAS() for all drivers
modpost: introduce module_alias_printf() helper
modpost: remove unnecessary check in do_acpi_entry()
...
Commit b1fca27d38 ("kernel debug: support resetting WARN*_ONCE")
added support for clearing the state of once warnings. However,
it is not functional when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION or
CONFIG_LTO_CLANG is enabled, because .data.once matches the
.data.[0-9a-zA-Z_]* pattern in the DATA_MAIN macro.
Commit cb87481ee8 ("kbuild: linker script do not match C names unless
LD_DEAD_CODE_DATA_ELIMINATION is configured") was introduced to suppress
the issue for the default CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=n case,
providing a minimal fix for stable backporting. We were aware this did
not address the issue for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y. The
plan was to apply correct fixes and then revert cb87481ee8. [1]
Seven years have passed since then, yet the #ifdef workaround remains in
place. Meanwhile, commit b1fca27d38 introduced the .data.once section,
and commit dc5723b02e ("kbuild: add support for Clang LTO") extended
the #ifdef.
Using a ".." separator in the section name fixes the issue for
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION and CONFIG_LTO_CLANG.
[1]: https://lore.kernel.org/linux-kbuild/CAK7LNASck6BfdLnESxXUeECYL26yUDm0cwRZuM4gmaWUkxjL5g@mail.gmail.com/
Fixes: b1fca27d38 ("kernel debug: support resetting WARN*_ONCE")
Fixes: dc5723b02e ("kbuild: add support for Clang LTO")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
-----BEGIN PGP SIGNATURE-----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=m/yY
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
"Thirteen patches, all focused on moving away from the current 'secid'
LSM identifier to a richer 'lsm_prop' structure.
This move will help reduce the translation that is necessary in many
LSMs, offering better performance, and make it easier to support
different LSMs in the future"
* tag 'lsm-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: remove lsm_prop scaffolding
netlabel,smack: use lsm_prop for audit data
audit: change context data from secid to lsm_prop
lsm: create new security_cred_getlsmprop LSM hook
audit: use an lsm_prop in audit_names
lsm: use lsm_prop in security_inode_getsecid
lsm: use lsm_prop in security_current_getsecid
audit: update shutdown LSM data
lsm: use lsm_prop in security_ipc_getsecid
audit: maintain an lsm_prop in audit_context
lsm: add lsmprop_to_secctx hook
lsm: use lsm_prop in security_audit_rule_match
lsm: add the lsm_prop data structure
Implement ipv6 udp hash4 like that in ipv4. The major difference is that
the hash value should be calculated with udp6_ehashfn(). Besides,
ipv4-mapped ipv6 address is handled before hash() and rehash(). Export
udp_ehashfn because now we use it in udpv6 rehash.
Core procedures of hash/unhash/rehash are same as ipv4, and udpv4 and
udpv6 share the same udptable, so some functions in ipv4 hash4 can also
be shared.
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the udp_table has two hash table, the port hash and portaddr
hash. Usually for UDP servers, all sockets have the same local port and
addr, so they are all on the same hash slot within a reuseport group.
In some applications, UDP servers use connect() to manage clients. In
particular, when firstly receiving from an unseen 4 tuple, a new socket
is created and connect()ed to the remote addr:port, and then the fd is
used exclusively by the client.
Once there are connected sks in a reuseport group, udp has to score all
sks in the same hash2 slot to find the best match. This could be
inefficient with a large number of connections, resulting in high
softirq overhead.
To solve the problem, this patch implement 4-tuple hash for connected
udp sockets. During connect(), hash4 slot is updated, as well as a
corresponding counter, hash4_cnt, in hslot2. In __udp4_lib_lookup(),
hslot4 will be searched firstly if the counter is non-zero. Otherwise,
hslot2 is used like before. Note that only connected sockets enter this
hash4 path, while un-connected ones are not affected.
hlist_nulls is used for hash4, because we probably move to another hslot
wrongly when lookup with concurrent rehash. Then we check nulls at the
list end to see if we should restart lookup. Because udp does not use
SLAB_TYPESAFE_BY_RCU, we don't need to touch sk_refcnt when lookup.
Stress test results (with 1 cpu fully used) are shown below, in pps:
(1) _un-connected_ socket as server
[a] w/o hash4: 1,825176
[b] w/ hash4: 1,831750 (+0.36%)
(2) 500 _connected_ sockets as server
[c] w/o hash4: 290860 (only 16% of [a])
[d] w/ hash4: 1,889658 (+3.1% compared with [b])
With hash4, compute_score is skipped when lookup, so [d] is slightly
better than [b].
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new hash list, hash4, in udp table. It will be used to implement
4-tuple hash for connected udp sockets. This patch adds the hlist to
table, and implements helpers and the initialization. 4-tuple hash is
implemented in the following patch.
hash4 uses hlist_nulls to avoid moving wrongly onto another hlist due to
concurrent rehash, because rehash() can happen with lookup().
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preparing for udp 4-tuple hash (uhash4 for short).
To implement uhash4 without cache line missing when lookup, hslot2 is
used to record the number of hashed sockets in hslot4. Thus adding a new
struct udp_hslot_main with field hash4_cnt, which is used by hash2. The
new struct is used to avoid doubling the size of udp_hslot.
Before uhash4 lookup, firstly checking hash4_cnt to see if there are
hashed sks in hslot4. Because hslot2 is always used in lookup, there is
no cache line miss.
Related helpers are updated, and use the helpers as possible.
uhash4 is implemented in following patches.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=Ioo8
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-11-15
1) Add support for RFC 9611 per cpu xfrm state handling.
2) Add inbound and outbound xfrm state caches to speed up
state lookups.
3) Convert xfrm to dscp_t. From Guillaume Nault.
4) Fix error handling in build_aevent.
From Everest K.C.
5) Replace strncpy with strscpy_pad in copy_to_user_auth.
From Daniel Yang.
6) Fix an uninitialized symbol during acquire state insertion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- btusb: add Foxconn 0xe0fc for Qualcomm WCN785x
- btmtk: Fix ISO interface handling
- Add quirk for ATS2851
- btusb: Add RTL8852BE device 0489:e123
- ISO: Do not emit LE PA/BIG Create Sync if previous is pending
- btusb: Add USB HW IDs for MT7920/MT7925
- btintel_pcie: Add handshake between driver and firmware
- btintel_pcie: Add recovery mechanism
- hci_conn: Use disable_delayed_work_sync
- SCO: Use kref to track lifetime of sco_conn
- ISO: Use kref to track lifetime of iso_conn
- btnxpuart: Add GPIO support to power save feature
- btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x
-----BEGIN PGP SIGNATURE-----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=niGG
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: add Foxconn 0xe0fc for Qualcomm WCN785x
- btmtk: Fix ISO interface handling
- Add quirk for ATS2851
- btusb: Add RTL8852BE device 0489:e123
- ISO: Do not emit LE PA/BIG Create Sync if previous is pending
- btusb: Add USB HW IDs for MT7920/MT7925
- btintel_pcie: Add handshake between driver and firmware
- btintel_pcie: Add recovery mechanism
- hci_conn: Use disable_delayed_work_sync
- SCO: Use kref to track lifetime of sco_conn
- ISO: Use kref to track lifetime of iso_conn
- btnxpuart: Add GPIO support to power save feature
- btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x
* tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (51 commits)
Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC
Bluetooth: fix use-after-free in device_for_each_child()
Bluetooth: btintel: Direct exception event to bluetooth stack
Bluetooth: hci_core: Fix calling mgmt_device_connected
Bluetooth: hci_bcm: Use the devm_clk_get_optional() helper
Bluetooth: ISO: Send BIG Create Sync via hci_sync
Bluetooth: hci_conn: Remove alloc from critical section
Bluetooth: ISO: Use kref to track lifetime of iso_conn
Bluetooth: SCO: Use kref to track lifetime of sco_conn
Bluetooth: HCI: Add IPC(11) bus type
Bluetooth: btusb: Add 3 HWIDs for MT7925
Bluetooth: btusb: Add new VID/PID 0489/e124 for MT7925
Bluetooth: ISO: Update hci_conn_hash_lookup_big for Broadcast slave
Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending
Bluetooth: ISO: Fix matching parent socket for BIS slave
Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending
Bluetooth: btrtl: Decrease HCI_OP_RESET timeout from 10 s to 2 s
Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name()
Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925
Bluetooth: btmtk: adjust the position to init iso data anchor
...
====================
Link: https://patch.msgid.link/20241114214731.1994446-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Tp49
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Extended netlink error reporting if nfnetlink attribute parser fails,
from Donald Hunter.
2) Incorrect request_module() module, from Simon Horman.
3) A series of patches to reduce memory consumption for set element
transactions.
Florian Westphal says:
"When doing a flush on a set or mass adding/removing elements from a
set, each element needs to allocate 96 bytes to hold the transactional
state.
In such cases, virtually all the information in struct nft_trans_elem
is the same.
Change nft_trans_elem to a flex-array, i.e. a single nft_trans_elem
can hold multiple set element pointers.
The number of elements that can be stored in one nft_trans_elem is limited
by the slab allocator, this series limits the compaction to at most 62
elements as it caps the reallocation to 2048 bytes of memory."
4) A series of patches to prepare the transition to dscp_t in .flowi_tos.
From Guillaume Nault.
5) Support for bitwise operations with two source registers,
from Jeremy Sowden.
* tag 'nf-next-24-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: bitwise: add support for doing AND, OR and XOR directly
netfilter: bitwise: rename some boolean operation functions
netfilter: nf_dup4: Convert nf_dup_ipv4_route() to dscp_t.
netfilter: nft_fib: Convert nft_fib4_eval() to dscp_t.
netfilter: rpfilter: Convert rpfilter_mt() to dscp_t.
netfilter: flow_offload: Convert nft_flow_route() to dscp_t.
netfilter: ipv4: Convert ip_route_me_harder() to dscp_t.
netfilter: nf_tables: allocate element update information dynamically
netfilter: nf_tables: switch trans_elem to real flex array
netfilter: nf_tables: prepare nft audit for set element compaction
netfilter: nf_tables: prepare for multiple elements in nft_trans_elem structure
netfilter: nf_tables: add nft_trans_commit_list_add_elem helper
netfilter: bpf: Pass string literal as format argument of request_module()
netfilter: nfnetlink: Report extack policy errors for batched ops
====================
Link: https://patch.msgid.link/20241115133207.8907-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds the initial implementation of MGMT_OP_HCI_CMD_SYNC as
documented in mgmt-api (BlueZ tree):
Send HCI command and wait for event Command
===========================================
Command Code: 0x005B
Controller Index: <controller id>
Command Parameters: Opcode (2 Octets)
Event (1 Octet)
Timeout (1 Octet)
Parameter Length (2 Octets)
Parameter (variable)
Return Parameters: Response (1-variable Octets)
This command may be used to send a HCI command and wait for an
(optional) event.
The HCI command is specified by the Opcode, any arbitrary is supported
including vendor commands, but contrary to the like of
Raw/User channel it is run as an HCI command send by the kernel
since it uses its command synchronization thus it is possible to wait
for a specific event as a response.
Setting event to 0x00 will cause the command to wait for either
HCI Command Status or HCI Command Complete.
Timeout is specified in seconds, setting it to 0 will cause the
default timeout to be used.
Possible errors: Failed
Invalid Parameters
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zephyr(1) has been using the same bus defines as Linux so tools likes of
btmon, etc, are able to decode the bus used by the driver to transport
HCI packets.
Link: https://github.com/zephyrproject-rtos/zephyr/pull/80808
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, hci_conn_hash_lookup_big only checks for BIS master connections,
by filtering out connections with the destination address set. This commit
updates this function to also consider BIS slave connections, since it is
also used for a Broadcast Receiver to set an available BIG handle before
issuing the LE BIG Create Sync command.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth Core spec does not allow a LE BIG Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2586).
In order to avoid this issue, the HCI_CONN_CREATE_BIG_SYNC was added
to mark that the LE BIG Create Sync command has been sent for a hcon.
Once the BIG Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth Core spec does not allow a LE PA Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2493).
In order to avoid this issue, the HCI_CONN_CREATE_PA_SYNC was added
to mark that the LE PA Create Sync command has been sent for a hcon.
Once the PA Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds quirks for broken extended create connection,
and write auth payload timeout.
Signed-off-by: Danil Pylaev <danstiv404@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move the timeout/expire/flag members from nft_trans_one_elem struct into
a dybamically allocated structure, only needed when timeout update was
requested.
This halves size of nft_trans_one_elem struct and allows to compact up to
124 elements in one transaction container rather than 62.
This halves memory requirements for a large flush or insert transaction,
where ->update remains NULL.
Care has to be taken to release the extra data in all spots, including
abort path.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add helpers to release the individual elements contained in the
trans_elem container structure.
No functional change intended.
Followup patch will add 'nelems' member and will turn 'priv' into
a flexible array.
These helpers can then loop over all elements.
Care needs to be taken to handle a mix of new elements and existing
elements that are being updated (e.g. timeout refresh).
Before this patch, NEWSETELEM transaction with update is released
early so nft_trans_set_elem_destroy() won't get called, so we need
to skip elements marked as update.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 4598380f9c ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.
For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.
To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.
There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
need to be guarded by arp_validate.
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmc04UYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuckgf/RV0zy8gMuzJ/cSk1GDKoOYmEwAZ4JvtW
teAKghsODDW/bng2iKnXphJyx3spZRCNuvOmfPcHsWoResX+vqrKJOaER/3159OF
68xAPZNXPRF4M693IpIUB/P3uTw/jieXPI7ftSPuUOhStca/ALwQd5Lp3kNKkVtq
HipXJwCenVS7Hd8DdHbpvYFUckRWr3tHPFlOgG3qOQOVvfRen2z9rhM14oK9rn+h
f309ATHKTbpTKNagOPYAYcyHs3zE59hlVRgRqHL7Ew0a0HI8uPJ4KK2n5W6tZJFN
swhoQolc1uXrRYlZ3Bdr7mKSIqt557kRz7NJ9ITe7KKCU0CxM/7nhQ==
=v8bS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6
(Jiawei Ye)
- Fix BPF sockmap with kTLS to reject vsock and unix sockets
upon kTLS context retrieval (Zijian Zhang)
- Fix BPF bits iterator selftest for s390x (Hou Tao)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZzQV0BUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIPFywD9Fx9Qc7LdWGmRAmWTqGKSOVPTBC1L
eC/uXop6sLqapP0A/1KsLQmntvXhp+gmxzPEBdwAwb7/DvyPCQV19FZ/sIkA
=lDzI
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye)
- Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS
context retrieval (Zijian Zhang)
- Fix BPF bits iterator selftest for s390x (Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6
bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx
selftests/bpf: Use -4095 as the bad address for bits iterator
In this commit, we make ip_route_use_hint() return drop reasons. The
drop reasons that we return are similar to what we do in
ip_route_input_slow(), and no drop reasons are added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In this commit, we make ip_mkroute_input() and __mkroute_input() return
drop reasons.
The drop reason "SKB_DROP_REASON_ARP_PVLAN_DISABLE" is introduced for
the case: the packet which is not IP is forwarded to the in_dev, and
the proxy_arp_pvlan is not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In this commit, we make ip_route_input() return skb drop reasons that come
from ip_route_input_noref().
Meanwhile, adjust all the call to it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In this commit, we make ip_route_input_noref() return drop reasons, which
come from ip_route_input_rcu().
We need adjust the callers of ip_route_input_noref() to make sure the
return value of ip_route_input_noref() is used properly.
The errno that ip_route_input_noref() returns comes from ip_route_input
and bpf_lwt_input_reroute in the origin logic, and we make them return
-EINVAL on error instead. In the following patch, we will make
ip_route_input() returns drop reasons too.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In this commit, we make ip_route_input_slow() return skb drop reasons,
and following new skb drop reasons are added:
SKB_DROP_REASON_IP_INVALID_DEST
The only caller of ip_route_input_slow() is ip_route_input_rcu(), and we
adjust it by making it return -EINVAL on error.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make ip_mc_validate_source() return drop reason, and adjust the call of
it in ip_route_input_mc().
Another caller of it is ip_rcv_finish_core->udp_v4_early_demux, and the
errno is not checked in detail, so we don't do more adjustment for it.
The drop reason "SKB_DROP_REASON_IP_LOCALNET" is added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In this commit, we make fib_validate_source() and __fib_validate_source()
return -reason instead of errno on error.
The return value of fib_validate_source can be -errno, 0, and 1. It's hard
to make fib_validate_source() return drop reasons directly.
The fib_validate_source() will return 1 if the scope of the source(revert)
route is HOST. And the __mkroute_input() will mark the skb with
IPSKB_DOREDIRECT in this case (combine with some other conditions). And
then, a REDIRECT ICMP will be sent in ip_forward() if this flag exists. We
can't pass this information to __mkroute_input if we make
fib_validate_source() return drop reasons.
Therefore, we introduce the wrapper fib_validate_source_reason() for
fib_validate_source(), which will return the drop reasons on error.
In the origin logic, LINUX_MIB_IPRPFILTER will be counted if
fib_validate_source() return -EXDEV. And now, we need to adjust it by
checking "reason == SKB_DROP_REASON_IP_RPFILTER". However, this will take
effect only after the patch "net: ip: make ip_route_input_noref() return
drop reasons", as we can't pass the drop reasons from
fib_validate_source() to ip_rcv_finish_core() in this patch.
Following new drop reasons are added in this patch:
SKB_DROP_REASON_IP_LOCAL_SOURCE
SKB_DROP_REASON_IP_INVALID_SOURCE
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The napi_suspend_irqs routine bootstraps irq suspension by elongating
the defer timeout to irq_suspend_timeout.
The napi_resume_irqs routine effectively cancels irq suspension by
forcing the napi to be scheduled immediately.
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://patch.msgid.link/20241109050245.191288-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, rtnl_setlink() and rtnl_dellink() cannot be fully converted
to per-netns RTNL due to a lack of handling peer/lower/upper devices in
different netns.
For example, when we change a device in rtnl_setlink() and need to
propagate that to its upper devices, we want to avoid acquiring all netns
locks, for which we do not know the upper limit.
The same situation happens when we remove a device.
rtnl_dellink() could be transformed to remove a single device in the
requested netns and delegate other devices to per-netns work, and
rtnl_setlink() might be ?
Until we come up with a better idea, let's use a new flag
RTNL_FLAG_DOIT_PERNET_WIP for rtnl_dellink() and rtnl_setlink().
This will unblock converting RTNL users where such devices are not related.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241108004823.29419-11-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In ops->newlink(), veth, vxcan, and netkit call rtnl_link_get_net() with
a net pointer, which is the first argument of ->newlink().
rtnl_link_get_net() could return another netns based on IFLA_NET_NS_PID
and IFLA_NET_NS_FD in the peer device's attributes.
We want to get it and fill rtnl_nets->nets[] in advance in rtnl_newlink()
for per-netns RTNL.
All of the three get the peer netns in the same way:
1. Call rtnl_nla_parse_ifinfomsg()
2. Call ops->validate() (vxcan doesn't have)
3. Call rtnl_link_get_net_tb()
Let's add a new field peer_type to struct rtnl_link_ops and prefetch
netns in the peer ifla to add it to rtnl_nets in rtnl_newlink().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241108004823.29419-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
link_ops is protected by link_ops_mutex and no longer needs RTNL,
so we have no reason to have __rtnl_link_register() separately.
Let's remove it and call rtnl_link_register() from ifb.ko and
dummy.ko.
Note that both modules' init() work on init_net only, so we need
not export pernet_ops_rwsem and can use rtnl_net_lock() there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241108004823.29419-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_link_unregister() holds RTNL and calls synchronize_srcu(),
but rtnl_newlink() will acquire SRCU frist and then RTNL.
Then, we need to unlink ops and call synchronize_srcu() outside
of RTNL to avoid the deadlock.
rtnl_link_unregister() rtnl_newlink()
---- ----
lock(rtnl_mutex);
lock(&ops->srcu);
lock(rtnl_mutex);
sync(&ops->srcu);
Let's move as such and add a mutex to protect link_ops.
Now, link_ops is protected by its dedicated mutex and
rtnl_link_register() no longer needs to hold RTNL.
While at it, we move the initialisation of ops->dellink and
ops->srcu out of the mutex scope.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241108004823.29419-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_link_unregister() holds RTNL and calls __rtnl_link_unregister(),
where we call synchronize_srcu() to wait inflight RTM_NEWLINK requests
for per-netns RTNL.
We put synchronize_srcu() in __rtnl_link_unregister() due to ifb.ko
and dummy.ko.
However, rtnl_newlink() will acquire SRCU before RTNL later in this
series. Then, lockdep will detect the deadlock:
rtnl_link_unregister() rtnl_newlink()
---- ----
lock(rtnl_mutex);
lock(&ops->srcu);
lock(rtnl_mutex);
sync(&ops->srcu);
To avoid the problem, we must call synchronize_srcu() before RTNL in
rtnl_link_unregister().
As a preparation, let's remove __rtnl_link_unregister().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241108004823.29419-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are quite a number of places that use patterns
such as
if (attr)
val = nla_get_u16(attr);
else
val = DEFAULT;
Add nla_get_u16_default() and friends like that to
not have to type this out all the time.
Acked-by: Toke Høiland-Jørgensen <toke@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241108114145.acd2aadb03ac.I3df6aac71d38a5baa1c0a03d0c7e82d4395c030e@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a mapping between a netdev and its neighoburs,
allowing for much cheaper flushes.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241107160444.2913124-7-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove all usage of the bare neighbour::next pointer,
replacing them with neighbour::hash and its for_each macro.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-5-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce neigh_for_each_in_bucket in neighbour.h, to help iterate over
the neighbour table more succinctly.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-3-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a doubly-linked node to neighbours, so that they
can be deleted without iterating the entire bucket they're in.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-2-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MCTP control protocol implementations are transport binding dependent.
Endpoint discovery is mandatory based on transport binding.
Message timing requirements are specified in each respective transport
binding specification.
However, we currently have no means to get this information from MCTP
links.
Add a IFLA_MCTP_PHYS_BINDING netlink link attribute, which represents
the transport type using the DMTF DSP0239-defined type numbers, returned
as part of RTM_GETLINK data.
We get an IFLA_MCTP_PHYS_BINDING attribute for each MCTP link, for
example:
- 0x00 (unspec) for loopback interface;
- 0x01 (SMBus/I2C) for mctpi2c%d interfaces; and
- 0x05 (serial) for mctpserial%d interfaces.
Signed-off-by: Khang Nguyen <khangng@os.amperecomputing.com>
Reviewed-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20241105071915.821871-1-khangng@os.amperecomputing.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the "tos" parameter of ip_route_output() to dscp_t. This way
we'll have a dscp_t value directly available when .flowi4_tos will
eventually be converted to dscp_t.
All ip_route_output() callers but one set this "tos" parameter to 0 and
therefore don't need to be adapted to the new prototype.
Only br_nf_pre_routing_finish() needs conversion. It can just use
ip4h_dscp() to get the DSCP field from the IPv4 header.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/0f10d031dd44c70aae9bc6e19391cb30d5c2fe71.1730928699.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sequence of calls has changed, but the description is inconsistent.
So, fix the description.
Fixes: 188a1bf894 ("wifi: mac80211: re-order assigning channel in activate links")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Link: https://patch.msgid.link/20241101082143.11138-1-kevin_yang@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----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=TkS8
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following series contains Netfilter updates for net-next:
1) Make legacy xtables configs user selectable, from Breno Leitao.
2) Fix a few sparse warnings related to percpu, from Uros Bizjak.
3) Use strscpy_pad, from Justin Stitt.
4) Use nft_trans_elem_alloc() in catchall flush, from Florian Westphal.
5) A series of 7 patches to fix false positive with CONFIG_RCU_LIST=y.
Florian also sees possible issue with 10 while module load/removal
when requesting an expression that is available via module. As for
patch 11, object is being updated so reference on the module already
exists so I don't see any real issue.
Florian says:
"Unfortunately there are many more errors, and not all are false positives.
First patches pass lockdep_commit_lock_is_held() to the rcu list traversal
macro so that those splats are avoided.
The last two patches are real code change as opposed to
'pass the transaction mutex to relax rcu check':
Those two lists are not protected by transaction mutex so could be altered
in parallel.
This targets nf-next because these are long-standing issues."
netfilter pull request 24-11-07
* tag 'nf-next-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: must hold rcu read lock while iterating object type list
netfilter: nf_tables: must hold rcu read lock while iterating expression type list
netfilter: nf_tables: avoid false-positive lockdep splats with basechain hook
netfilter: nf_tables: avoid false-positive lockdep splats in set walker
netfilter: nf_tables: avoid false-positive lockdep splats with flowtables
netfilter: nf_tables: avoid false-positive lockdep splats with sets
netfilter: nf_tables: avoid false-positive lockdep splat on rule deletion
netfilter: nf_tables: prefer nft_trans_elem_alloc helper
netfilter: nf_tables: replace deprecated strncpy with strscpy_pad
netfilter: nf_tables: Fix percpu address space issues in nf_tables_api.c
netfilter: Make legacy configs user selectable
====================
Link: https://patch.msgid.link/20241106234625.168468-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8c873e2199 ("netfilter: core: free hooks with call_rcu") removed
synchronize_net() call when unregistering basechain hook, however,
net_device removal event handler for the NFPROTO_NETDEV was not updated
to wait for RCU grace period.
Note that 835b803377 ("netfilter: nf_tables_netdev: unregister hooks
on net_device removal") does not remove basechain rules on device
removal, I was hinted to remove rules on net_device removal later, see
5ebe0b0eec ("netfilter: nf_tables: destroy basechain and rules on
netdevice removal").
Although NETDEV_UNREGISTER event is guaranteed to be handled after
synchronize_net() call, this path needs to wait for rcu grace period via
rcu callback to release basechain hooks if netns is alive because an
ongoing netlink dump could be in progress (sockets hold a reference on
the netns).
Note that nf_tables_pre_exit_net() unregisters and releases basechain
hooks but it is possible to see NETDEV_UNREGISTER at a later stage in
the netns exit path, eg. veth peer device in another netns:
cleanup_net()
default_device_exit_batch()
unregister_netdevice_many_notify()
notifier_call_chain()
nf_tables_netdev_event()
__nft_release_basechain()
In this particular case, same rule of thumb applies: if netns is alive,
then wait for rcu grace period because netlink dump in the other netns
could be in progress. Otherwise, if the other netns is going away then
no netlink dump can be in progress and basechain hooks can be released
inmediately.
While at it, turn WARN_ON() into WARN_ON_ONCE() for the basechain
validation, which should not ever happen.
Fixes: 835b803377 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a 20-byte field ats to struct nfc_target and expose it as
NFC_ATTR_TARGET_ATS via the netlink interface. The payload contains
'historical bytes' that help to distinguish cards from one another.
The information is commonly used to assemble an emulated ATR similar
to that reported by smart cards with contacts.
Add a 20-byte field target_ats to struct nci_dev to hold the payload
obtained in nci_rf_intf_activated_ntf_packet() and copy it to over to
nfc_target.ats in nci_activate_target(). The approach is similar
to the handling of 'general bytes' within ATR_RES.
Replace the hard-coded size of rats_res within struct
activation_params_nfca_poll_iso_dep by the equal constant NFC_ATS_MAXSIZE
now defined in nfc.h
Within NCI, the information corresponds to the 'RATS Response' activation
parameter that omits the initial length byte TL. This loses no
information and is consistent with our handling of SENSB_RES that
also drops the first (constant) byte.
Tested with nxp_nci_i2c on a few type A targets including an
ICAO 9303 compliant passport.
I refrain from the corresponding change to digital_in_recv_ats()
to have the few drivers based on digital.h fill nfc_target.ats,
as I have no way to test it. That class of drivers appear not to set
NFC_ATTR_TARGET_SENSB_RES either. Consider a separate patch to propagate
(all) the parameters.
Signed-off-by: Juraj Šarinay <juraj@sarinay.com>
Link: https://patch.msgid.link/20241103124525.8392-1-juraj@sarinay.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As the introduction of the support for vsock and unix sockets in sockmap,
tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK.
vsock and af_unix sockets have vsock_sock and unix_sock instead of
inet_connection_sock. For these sockets, tls_get_ctx may return an invalid
pointer and cause page fault in function tls_sw_ctx_rx.
BUG: unable to handle page fault for address: 0000000000040030
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:sk_psock_strp_data_ready+0x23/0x60
Call Trace:
? __die+0x81/0xc3
? no_context+0x194/0x350
? do_page_fault+0x30/0x110
? async_page_fault+0x3e/0x50
? sk_psock_strp_data_ready+0x23/0x60
virtio_transport_recv_pkt+0x750/0x800
? update_load_avg+0x7e/0x620
vsock_loopback_work+0xd0/0x100
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? __kthread_cancel_work+0x40/0x40
ret_from_fork+0x1f/0x40
v2:
- Add IS_ICSK check
v3:
- Update the commits in Fixes
Fixes: 634f1a7110 ("vsock: support sockmap")
Fixes: 94531cfcbe ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20241106003742.399240-1-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add type annotation to the "tos" field of struct xfrm_dst_lookup_params,
to ensure that the ECN bits aren't mistakenly taken into account when
doing route lookups. Rename that field (tos -> dscp) to make that
change explicit.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The transaction mutex prevents concurrent add/delete, its ok to iterate
those lists outside of rcu read side critical sections.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZyP6TxUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISINz7QD/RTuJAzPJXPQmjdzMj7pepjnSQH4K
DnOc1soDqjJPSFkBAMlklDCZqSsFoNtNxagbyILrYQBC/MsV9jngimK46DEN
=pDzC
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-10-31
We've added 13 non-merge commits during the last 16 day(s) which contain
a total of 16 files changed, 710 insertions(+), 668 deletions(-).
The main changes are:
1) Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it, from Puranjay Mohan.
2) Rewrite and migrate the test_tcp_check_syncookie.sh BPF selftest
into test_progs so that it can be run in BPF CI, from Alexis Lothoré.
3) Two BPF sockmap selftest fixes, from Zijian Zhang.
4) Small XDP synproxy BPF selftest cleanup to remove IP_DF check,
from Vincent Li.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add a selftest for bpf_csum_diff()
selftests/bpf: Don't mask result of bpf_csum_diff() in test_verifier
bpf: bpf_csum_diff: Optimize and homogenize for all archs
net: checksum: Move from32to16() to generic header
selftests/bpf: remove xdp_synproxy IP_DF check
selftests/bpf: remove test_tcp_check_syncookie
selftests/bpf: test MSS value returned with bpf_tcp_gen_syncookie
selftests/bpf: add ipv4 and dual ipv4/ipv6 support in btf_skc_cls_ingress
selftests/bpf: get rid of global vars in btf_skc_cls_ingress
selftests/bpf: add missing ns cleanups in btf_skc_cls_ingress
selftests/bpf: factorize conn and syncookies tests in a single runner
selftests/bpf: Fix txmsg_redir of test_txmsg_pull in test_sockmap
selftests/bpf: Fix msg_verify_data in test_sockmap
====================
Link: https://patch.msgid.link/20241031221543.108853-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Under CONFIG_PROVE_RCU_LIST + CONFIG_RCU_EXPERT
hlist_for_each_entry_rcu() provides very helpful splats, which help
to find possible issues. I missed CONFIG_RCU_EXPERT=y in my testing
config the same as described in
a3e4bf7f96 ("configs/debug: make sure PROVE_RCU_LIST=y takes effect").
The fix itself is trivial: add the very same lockdep annotations
as were used to dereference ao_info from the socket.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20241028152645.35a8be66@kernel.org/
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20241030-tcp-ao-hlist-lockdep-annotate-v1-1-bf641a64d7c6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similarly to NLA_POLICY_MIN_LEN, NLA_POLICY_MAX_LEN defines a policy
with a maximum length value.
The netlink generator for YAML specs has been extended accordingly.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241029-b4-ovpn-v11-1-de4698c73a25@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add documentation of doi_remove field to Kernel doc for struct netlbl_calipso_ops.
Flagged by ./scripts/kernel-doc -none.
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20241028123435.3495916-1-dongtai.guo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Background: switchdev ports offload the Linux bridge, and most of the
packets they handle will never see the CPU. The ports between which
there exists no hardware data path are considered 'foreign' to switchdev.
These can either be normal physical NICs without switchdev offload, or
incompatible switchdev ports, or virtual interfaces like veth/dummy/etc.
In some cases, an offloaded filter can only do half the work, and the
rest must be handled by software. Redirecting/mirroring from the ingress
of a switchdev port towards a foreign interface is one example of
combined hardware/software data path. The most that the switchdev port
can do is to extract the matching packets from its offloaded data path
and send them to the CPU. From there on, the software filter runs
(a second time, after the first run in hardware) on the packet and
performs the mirred action.
It makes sense for switchdev drivers which allow this kind of "half
offloading" to sense the "skip_sw" flag of the filter/action pair, and
deny attempts from the user to install a filter that does not run in
software, because that simply won't work.
In fact, a mirred action on a switchdev port towards a dummy interface
appears to be a valid way of (selectively) monitoring offloaded traffic
that flows through it. IFF_PROMISC was also discussed years ago, but
(despite initial disagreement) there seems to be consensus that this
flag should not affect the destination taken by packets, but merely
whether or not the NIC discards packets with unknown MAC DA for local
processing.
[1] https://lore.kernel.org/netdev/20190830092637.7f83d162@ceranb/
[2] https://lore.kernel.org/netdev/20191002233750.13566-1-olteanv@gmail.com/
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/netdev/ZxUo0Dc0M5Y6l9qF@shredder.mtl.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241023135251.1752488-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
from32to16() is used by lib/checksum.c and also by
arch/parisc/lib/checksum.c. The next patch will use it in the
bpf_csum_diff helper.
Move from32to16() to the include/net/checksum.h as csum_from32to16() and
remove other implementations.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20241026125339.26459-2-puranjay@kernel.org
Add two fields to print in the helper which here covers tcp_send_loss_probe().
Link: https://lore.kernel.org/all/5632e043-bdba-4d75-bc7e-bf58014492fd@redhat.com/
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Cc: Neal Cardwell <ncardwell@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following the commit c8770db2d5 ("tcp: check skb is non-NULL
in tcp_rto_delta_us()"), we decided to add a helper so that it's
easier to get verbose warning on either cases.
Link: https://lore.kernel.org/all/5632e043-bdba-4d75-bc7e-bf58014492fd@redhat.com/
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Cc: Neal Cardwell <ncardwell@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first -next "new features" pull request for v6.13. This is a big
one as we have not been able to send one earlier. We have also some
patches affecting other subsystems: in staging we deleted the rtl8192e
driver and in debugfs added a new interface to save struct
file_operations memory; both were acked by GregKH.
Because of the lib80211/libipw move there were quite a lot of
conflicts and to solve those we decided to merge net-next into
wireless-next.
Currently there's one conflict in
Documentation/networking/net_cachelines/net_device.rst. To fix that
just remove the iw_public_data line:
https://lore.kernel.org/all/20241011121014.674661a0@canb.auug.org.au/
And when net is merged to net-next there will be another simple
conflict in in net/mac80211/cfg.c:
https://lore.kernel.org/all/20241024115523.4cd35dde@canb.auug.org.au/
Major changes:
cfg80211/mac80211
* stop exporting wext symbols
* new mac80211 op to indicate that a new interface is to be added
* support radio separation of multi-band devices
Wireless Extensions
* move wext spy implementation to libiw
* remove iw_public_data from struct net_device
brcmfmac
* optional LPO clock support
ipw2x00
* move remaining lib80211 code into libiw
wilc1000
* WILC3000 support
rtw89
* RTL8852BE and RTL8852BE-VT BT-coexistence improvements
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmcbz9YRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZsabQf8CWJ/kyonw/Z8hRxgfE/7D6Jiqoq7R+ML
8W8lbc6F5wra4eCBq/oo6UVV36Ss6mxQYcRcmLq+nCkXa4qdMpg/z55QECMHxx5Z
YnIBbD2vBrIj7W21gfCKH1WJ+b5IQFZl3zuxuCgXjxD9TJM2CjUfOkvrhrqqzrPn
clfUx5f01vfv2jdvClPR5977gFE5One/ANeRQNs7uDS0TeeD2P+61DEB1//htIJo
7GwwCyUJCeOcfWRMzQwhpoppWKcPAV70kSVJrl/fRstS68vQGSQbcx9yiNeWkSFw
JXjQGdc8eYLPzLqECwS0KwFkta6AXbafAYYXe1wdlAzr+kmJ9x5oqA==
=x+mr
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
The first -next "new features" pull request for v6.13. This is a big
one as we have not been able to send one earlier. We have also some
patches affecting other subsystems: in staging we deleted the rtl8192e
driver and in debugfs added a new interface to save struct
file_operations memory; both were acked by GregKH.
Because of the lib80211/libipw move there were quite a lot of
conflicts and to solve those we decided to merge net-next into
wireless-next.
Major changes:
cfg80211/mac80211
* stop exporting wext symbols
* new mac80211 op to indicate that a new interface is to be added
* support radio separation of multi-band devices
Wireless Extensions
* move wext spy implementation to libiw
* remove iw_public_data from struct net_device
brcmfmac
* optional LPO clock support
ipw2x00
* move remaining lib80211 code into libiw
wilc1000
* WILC3000 support
rtw89
* RTL8852BE and RTL8852BE-VT BT-coexistence improvements
* tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (126 commits)
mac80211: Remove NOP call to ieee80211_hw_config
wifi: iwlwifi: work around -Wenum-compare-conditional warning
wifi: mac80211: re-order assigning channel in activate links
wifi: mac80211: convert debugfs files to short fops
debugfs: add small file operations for most files
wifi: mac80211: remove misleading j_0 construction parts
wifi: mac80211_hwsim: use hrtimer_active()
wifi: mac80211: refactor BW limitation check for CSA parsing
wifi: mac80211: filter on monitor interfaces based on configured channel
wifi: mac80211: refactor ieee80211_rx_monitor
wifi: mac80211: add support for the monitor SKIP_TX flag
wifi: cfg80211: add monitor SKIP_TX flag
wifi: mac80211: add flag to opt out of virtual monitor support
wifi: cfg80211: pass net_device to .set_monitor_channel
wifi: mac80211: remove status->ampdu_delimiter_crc
wifi: cfg80211: report per wiphy radio antenna mask
wifi: mac80211: use vif radio mask to limit creating chanctx
wifi: mac80211: use vif radio mask to limit ibss scan frequencies
wifi: cfg80211: add option for vif allowed radios
wifi: iwlwifi: allow IWL_FW_CHECK() with just a string
...
====================
Link: https://patch.msgid.link/20241025170705.5F6B2C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove not used devlink_resource_occ_get_register() and
devlink_resource_occ_get_unregister() functions; current devlink resource
users are fine with devl_ variants of the two.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241023131248.27192-7-przemyslaw.kitszel@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I suggested to put DEBUG_NET_WARN_ON_ONCE() in __sock_create() to
catch possible use-after-free.
But the warning itself was not useful because our interest is in
the callee than the caller.
Let's define DEBUG_NET_WARN_ONCE() and print the name of pf->create()
and the socket identifier.
While at it, we enclose DEBUG_NET_WARN_ON_ONCE() in parentheses too
to avoid a checkpatch error.
Note that %pf or %pF were obsoleted and will be removed later as per
comment in lib/vsprintf.c.
Link: https://lore.kernel.org/netdev/202410231427.633734b3-lkp@intel.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241024201458.49412-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are code paths from which the function is called without holding
the RCU read lock, resulting in a suspicious RCU usage warning [1].
Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire
the RCU read lock before calling
l3mdev_master_upper_ifindex_by_index_rcu().
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/361:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0xba/0x110
lockdep_rcu_suspicious.cold+0x4f/0xd6
dev_get_by_index_rcu+0x1d3/0x210
l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0
ip_tunnel_bind_dev+0x72f/0xa00
ip_tunnel_newlink+0x368/0x7a0
ipgre_newlink+0x14c/0x170
__rtnl_newlink+0x1173/0x19c0
rtnl_newlink+0x6c/0xa0
rtnetlink_rcv_msg+0x3cc/0xf60
netlink_rcv_skb+0x171/0x450
netlink_unicast+0x539/0x7f0
netlink_sendmsg+0x8c1/0xd80
____sys_sendmsg+0x8f9/0xc20
___sys_sendmsg+0x197/0x1e0
__sys_sendmsg+0x122/0x1f0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: db53cd3d88 ("net: Handle l3mdev in ip_tunnel_init_flow")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241022063822.462057-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we can have percpu xfrm states, the number of active
states might increase. To get a better lookup performance,
we add a percpu cache to cache the used inbound xfrm states.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Now that we can have percpu xfrm states, the number of active
states might increase. To get a better lookup performance,
we cache the used xfrm states at the policy for outbound
IPsec traffic.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Currently all flows for a certain SA must be processed by the same
cpu to avoid packet reordering and lock contention of the xfrm
state lock.
To get rid of this limitation, the IETF standardized per cpu SAs
in RFC 9611. This patch implements the xfrm part of it.
We add the cpu as a lookup key for xfrm states and a config option
to generate acquire messages for each cpu.
With that, we can have on each cpu a SA with identical traffic selector
so that flows can be processed in parallel on all cpus.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Tested-by: Tobias Brunner <tobias@strongswan.org>
We will push RTNL down to each doit() as rtnl_net_lock().
We can use RTNL_FLAG_DOIT_UNLOCKED to call doit() without RTNL, but doit()
will still hold RTNL.
Let's define RTNL_FLAG_DOIT_PERNET as an alias of RTNL_FLAG_DOIT_UNLOCKED.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmcWl7MRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZv0Qgf/fQJKXkGJkvozrbJATkKHfHKUOphIl4Y8
/r3SlrsIL6qXZAUq5N+NH9vfUeKt5kkKG8Fc8yrJaygDLsV9v1LGiBSsb5eJ+PfM
4fCOdzPSrWG984dLwsCK8UGEzfQ1G4d6HckwubUMimK2X/m6wx/99fenjMAQvdWO
rjAJmpAkgoT0Fvf8GD3joMBKKjMFr2KT8tgbfvwpyr9cXAPZYf35+74Nl84UjHiP
rGTGN++NQuPMsYyYIPPA+eMNUnlUVyDah+UVmzsMp27YUdKBKjx23kRH6tKM/46H
dWqpqEV50xshlPaotHoFg9+4KRrxnxwvFtGTsnbvHcuSnkPBUusAvw==
=l6SI
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
wireless fixes for v6.12-rc5
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
Current release - regressions:
- posix-clock: Fix unbalanced locking in pc_clock_settime()
- netfilter: fix typo causing some targets not to load on IPv6
Current release - new code bugs:
- xfrm: policy: remove last remnants of pernet inexact list
Previous releases - regressions:
- core: fix races in netdev_tx_sent_queue()/dev_watchdog()
- bluetooth: fix UAF on sco_sock_timeout
- eth: hv_netvsc: fix VF namespace also in synthetic NIC NETDEV_REGISTER event
- eth: usbnet: fix name regression
- eth: be2net: fix potential memory leak in be_xmit()
- eth: plip: fix transmit path breakage
Previous releases - always broken:
- sched: deny mismatched skip_sw/skip_hw flags for actions created by classifiers
- netfilter: bpf: must hold reference on net namespace
- eth: virtio_net: fix integer overflow in stats
- eth: bnxt_en: replace ptp_lock with irqsave variant
- eth: octeon_ep: add SKB allocation failures handling in __octep_oq_process_rx()
Misc:
- MAINTAINERS: add Simon as an official reviewer
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=dR3Q
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfiler, xfrm and bluetooth.
Oddly this includes a fix for a posix clock regression; in our
previous PR we included a change there as a pre-requisite for
networking one. That fix proved to be buggy and requires the follow-up
included here. Thomas suggested we should send it, given we sent the
buggy patch.
Current release - regressions:
- posix-clock: Fix unbalanced locking in pc_clock_settime()
- netfilter: fix typo causing some targets not to load on IPv6
Current release - new code bugs:
- xfrm: policy: remove last remnants of pernet inexact list
Previous releases - regressions:
- core: fix races in netdev_tx_sent_queue()/dev_watchdog()
- bluetooth: fix UAF on sco_sock_timeout
- eth: hv_netvsc: fix VF namespace also in synthetic NIC
NETDEV_REGISTER event
- eth: usbnet: fix name regression
- eth: be2net: fix potential memory leak in be_xmit()
- eth: plip: fix transmit path breakage
Previous releases - always broken:
- sched: deny mismatched skip_sw/skip_hw flags for actions created by
classifiers
- netfilter: bpf: must hold reference on net namespace
- eth: virtio_net: fix integer overflow in stats
- eth: bnxt_en: replace ptp_lock with irqsave variant
- eth: octeon_ep: add SKB allocation failures handling in
__octep_oq_process_rx()
Misc:
- MAINTAINERS: add Simon as an official reviewer"
* tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: dsa: mv88e6xxx: support 4000ps cycle counter period
net: dsa: mv88e6xxx: read cycle counter period from hardware
net: dsa: mv88e6xxx: group cycle counter coefficients
net: usb: qmi_wwan: add Fibocom FG132 0x0112 composition
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
net: dsa: microchip: disable EEE for KSZ879x/KSZ877x/KSZ876x
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime()
r8169: avoid unsolicited interrupts
net: sched: use RCU read-side critical section in taprio_dump()
net: sched: fix use-after-free in taprio_change()
net/sched: act_api: deny mismatched skip_sw/skip_hw flags for actions created by classifiers
net: usb: usbnet: fix name regression
mlxsw: spectrum_router: fix xa_store() error checking
virtio_net: fix integer overflow in stats
net: fix races in netdev_tx_sent_queue()/dev_watchdog()
net: wwan: fix global oob in wwan_rtnl_policy
netfilter: xtables: fix typo causing some targets not to load on IPv6
...
route_doit() calls phonet_route_add() or phonet_route_del()
for RTM_NEWROUTE or RTM_DELROUTE, respectively.
Both functions only touch phonet_pernet(dev_net(dev))->routes,
which is currently protected by RTNL and its dedicated mutex,
phonet_routes.lock.
We will convert route_doit() to RCU and cannot use mutex inside RCU.
Let's convert the mutex to spinlock_t.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, rtm_phonet_notify() fetches netns and ifindex from dev.
Once route_doit() is converted to RCU, rtm_phonet_notify() will be
called outside of RCU due to GFP_KERNEL, and dev will be unavailable
there.
Let's pass net and ifindex to rtm_phonet_notify().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
addr_doit() calls phonet_address_add() or phonet_address_del()
for RTM_NEWADDR or RTM_DELADDR, respectively.
Both functions only touch phonet_device_list(dev_net(dev)),
which is currently protected by RTNL and its dedicated mutex,
phonet_device_list.lock.
We will convert addr_doit() to RCU and cannot use mutex inside RCU.
Let's convert the mutex to spinlock_t.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, phonet_address_notify() fetches netns and ifindex from dev.
Once addr_doit() is converted to RCU, phonet_address_notify() will be
called outside of RCU due to GFP_KERNEL, and dev will be unavailable
there.
Let's pass net and ifindex to phonet_address_notify().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- hci_core: Disable works on hci_unregister_dev
- SCO: Fix UAF on sco_sock_timeout
- ISO: Fix UAF on iso_sock_timeout
-----BEGIN PGP SIGNATURE-----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=gOTr
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: Disable works on hci_unregister_dev
- SCO: Fix UAF on sco_sock_timeout
- ISO: Fix UAF on iso_sock_timeout
* tag 'for-net-2024-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
====================
Link: https://patch.msgid.link/20241023143005.2297694-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ai21
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2024-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-10-22
1) Fix routing behavior that relies on L4 information
for xfrm encapsulated packets.
From Eyal Birger.
2) Remove leftovers of pernet policy_inexact lists.
From Florian Westphal.
3) Validate new SA's prefixlen when the selector family is
not set from userspace.
From Sabrina Dubroca.
4) Fix a kernel-infoleak when dumping an auth algorithm.
From Petr Vaganov.
Please pull or let me know if there are problems.
ipsec-2024-10-22
* tag 'ipsec-2024-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix one more kernel-infoleak in algo dumping
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
xfrm: policy: remove last remnants of pernet inexact list
xfrm: respect ip protocols rules criteria when performing dst lookups
xfrm: extract dst lookup parameters into a struct
====================
Link: https://patch.msgid.link/20241022092226.654370-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is useful for multi-radio devices that are capable of monitoring on
multiple channels simultanenously. When this flag is set, each monitor
interface is passed to the driver individually and can have a configured
channel.
The vif mac address for non-active monitor interfaces is cleared, in order
to allow the driver to tell them apart from active ones.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/3c55505ee0cf0a5f141fbcb30d1e8be8d9f40373.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With multi-radio devices, each radio typically gets a fixed set of antennas.
In order to be able to disable specific antennas for some radios, user space
needs to know which antenna mask bits are assigned to which radio.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/e0a26afa2c88eaa188ec96ec6d17ecac4e827641.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows users to prevent a vif from affecting radios other than the
configured ones. This can be useful in cases where e.g. an AP is running
on one radio, and triggering a scan on another radio should not disturb it.
Changing the allowed radios list for a vif is supported, but only while
it is down.
While it is possible to achieve the same by always explicitly specifying
a frequency list for scan requests and ensuring that the wrong channel/band
is never accidentally set on an unrelated interface, this change makes
multi-radio wiphy setups a lot easier to deal with for CLI users.
By itself, this patch only enforces the radio mask for scanning requests
and remain-on-channel. Follow-up changes build on this to limit configured
frequencies.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/eefcb218780f71a1549875d149f1196486762756.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers might need to also do this calculation, no point in
them duplicating the code. Since it's so simple, just make
it an inline.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.af003cb4a088.I8b5d29504b726caae24af6013c65b3daebe842a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to update the right link information, call the update
rate_control_rate_update() with the right link_sta, and then
pass that through to the driver's sta_rc_update() method. The
software rate control still doesn't support it, but that'll be
skipped by not having a rate control ref.
Since it now operates on a link sta, rename the driver method.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers may need to track this. Make it available for them, and maintain
the value when beacons are received.
When link X receives a beacon, iterate the RNR elements and update all
the links with their respective data.
Track the link id that updated the data so that each link can know
whether the update came from its own beacon or from another link.
In case, the update came from the link's own beacon, always update the
updater link id.
The purpose is to let the low level driver know if a link is losing its
beacons. If link X is losing its beacons, it can still track the
bss_param_ch_cnt and know where the update came from.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.e2d8d1a722ad.I04b883daba2cd48e5730659eb62ca1614c899cbb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In practice, userspace hasn't been able to set this for many
years, and mac80211 has already rejected it (which is now no
longer needed), so reject SMPS mode (other than "OFF" to be
a bit more compatible) in AP mode. Also remove the parameter
from the AP settings struct.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.fe1fc46484cf.I8676fb52b818a4bedeb9c25b901e1396277ffc0b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support to indicate to the driver that an interface is about to be
added so that the driver could prepare its resources early if it needs
so.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.e0e8563e1c30.Ifccc96a46a347eb15752caefc9f4eff31f75ed47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Recently, commit 4a0ec2aa07 ("ipv6: switch inet6_addr_hash()
to less predictable hash") and commit 4daf4dc275 ("ipv6: switch
inet6_acaddr_hash() to less predictable hash") hardened IPv6
address hash functions.
inet_addr_hash() is also highly predictable, and a malicious use
could abuse a specific bucket.
Let's follow the change on IPv4 by using jhash_1word().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241018014100.93776-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This isn't used outside act_api.c, but is called by tcf_dump_walker()
prior to its definition. So move it upwards and make it static.
Simultaneously, reorder the variable declarations so that they follow
the networking "reverse Christmas tree" coding style.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241017161934.3599046-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Once RTNL is replaced with rtnl_net_lock(), we need a mechanism to
guarantee that rtnl_af_ops is alive during inflight RTM_SETLINK
even when its module is being unloaded.
Let's use SRCU to protect ops.
rtnl_af_lookup() now iterates rtnl_af_ops under RCU and returns
SRCU-protected ops pointer. The caller must call rtnl_af_put()
to release the pointer after the use.
Also, rtnl_af_unregister() unlinks the ops first and calls
synchronize_srcu() to wait for inflight RTM_SETLINK requests to
complete.
Note that rtnl_af_ops needs to be protected by its dedicated lock
when RTNL is removed.
Note also that BUG_ON() in do_setlink() is changed to the normal
error handling as a different af_ops might be found after
validate_linkmsg().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The next patch will add init_srcu_struct() in rtnl_af_register(),
then we need to handle its error.
Let's add the error handling in advance to make the following
patch cleaner.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Once RTNL is replaced with rtnl_net_lock(), we need a mechanism to
guarantee that rtnl_link_ops is alive during inflight RTM_NEWLINK
even when its module is being unloaded.
Let's use SRCU to protect ops.
rtnl_link_ops_get() now iterates link_ops under RCU and returns
SRCU-protected ops pointer. The caller must call rtnl_link_ops_put()
to release the pointer after the use.
Also, __rtnl_link_unregister() unlinks the ops first and calls
synchronize_srcu() to wait for inflight RTM_NEWLINK requests to
complete.
Note that link_ops needs to be protected by its dedicated lock
when RTNL is removed.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c4 ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Fix BPF verifier to not affect subreg_def marks in its range
propagation, from Eduard Zingerman.
- Fix a truncation bug in the BPF verifier's handling of
coerce_reg_to_size_sx, from Dimitar Kanaliev.
- Fix the BPF verifier's delta propagation between linked
registers under 32-bit addition, from Daniel Borkmann.
- Fix a NULL pointer dereference in BPF devmap due to missing
rxq information, from Florian Kauer.
- Fix a memory leak in bpf_core_apply, from Jiri Olsa.
- Fix an UBSAN-reported array-index-out-of-bounds in BTF
parsing for arrays of nested structs, from Hou Tao.
- Fix build ID fetching where memory areas backing the file
were created with memfd_secret, from Andrii Nakryiko.
- Fix BPF task iterator tid filtering which was incorrectly
using pid instead of tid, from Jordan Rome.
- Several fixes for BPF sockmap and BPF sockhash redirection
in combination with vsocks, from Michal Luczaj.
- Fix riscv BPF JIT and make BPF_CMPXCHG fully ordered,
from Andrea Parri.
- Fix riscv BPF JIT under CONFIG_CFI_CLANG to prevent the
possibility of an infinite BPF tailcall, from Pu Lehui.
- Fix a build warning from resolve_btfids that bpf_lsm_key_free
cannot be resolved, from Thomas Weißschuh.
- Fix a bug in kfunc BTF caching for modules where the wrong
BTF object was returned, from Toke Høiland-Jørgensen.
- Fix a BPF selftest compilation error in cgroup-related tests
with musl libc, from Tony Ambardar.
- Several fixes to BPF link info dumps to fill missing fields,
from Tyrone Wu.
- Add BPF selftests for kfuncs from multiple modules, checking
that the correct kfuncs are called, from Simon Sundberg.
- Ensure that internal and user-facing bpf_redirect flags
don't overlap, also from Toke Høiland-Jørgensen.
- Switch to use kvzmalloc to allocate BPF verifier environment,
from Rik van Riel.
- Use raw_spinlock_t in BPF ringbuf to fix a sleep in atomic
splat under RT, from Wander Lairson Costa.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZxK4OhUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIOCrwEAib2kC5EEQn5+wKVE/bnZryVX2leT
YXdfItDCBU6zCYUA+wTU5hGGn9lcDUcZx72l/KZPDyPw7HdzNJ+6iR1zQqoM
=f9kv
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix BPF verifier to not affect subreg_def marks in its range
propagation (Eduard Zingerman)
- Fix a truncation bug in the BPF verifier's handling of
coerce_reg_to_size_sx (Dimitar Kanaliev)
- Fix the BPF verifier's delta propagation between linked registers
under 32-bit addition (Daniel Borkmann)
- Fix a NULL pointer dereference in BPF devmap due to missing rxq
information (Florian Kauer)
- Fix a memory leak in bpf_core_apply (Jiri Olsa)
- Fix an UBSAN-reported array-index-out-of-bounds in BTF parsing for
arrays of nested structs (Hou Tao)
- Fix build ID fetching where memory areas backing the file were
created with memfd_secret (Andrii Nakryiko)
- Fix BPF task iterator tid filtering which was incorrectly using pid
instead of tid (Jordan Rome)
- Several fixes for BPF sockmap and BPF sockhash redirection in
combination with vsocks (Michal Luczaj)
- Fix riscv BPF JIT and make BPF_CMPXCHG fully ordered (Andrea Parri)
- Fix riscv BPF JIT under CONFIG_CFI_CLANG to prevent the possibility
of an infinite BPF tailcall (Pu Lehui)
- Fix a build warning from resolve_btfids that bpf_lsm_key_free cannot
be resolved (Thomas Weißschuh)
- Fix a bug in kfunc BTF caching for modules where the wrong BTF object
was returned (Toke Høiland-Jørgensen)
- Fix a BPF selftest compilation error in cgroup-related tests with
musl libc (Tony Ambardar)
- Several fixes to BPF link info dumps to fill missing fields (Tyrone
Wu)
- Add BPF selftests for kfuncs from multiple modules, checking that the
correct kfuncs are called (Simon Sundberg)
- Ensure that internal and user-facing bpf_redirect flags don't overlap
(Toke Høiland-Jørgensen)
- Switch to use kvzmalloc to allocate BPF verifier environment (Rik van
Riel)
- Use raw_spinlock_t in BPF ringbuf to fix a sleep in atomic splat
under RT (Wander Lairson Costa)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (38 commits)
lib/buildid: Handle memfd_secret() files in build_id_parse()
selftests/bpf: Add test case for delta propagation
bpf: Fix print_reg_state's constant scalar dump
bpf: Fix incorrect delta propagation between linked registers
bpf: Properly test iter/task tid filtering
bpf: Fix iter/task tid filtering
riscv, bpf: Make BPF_CMPXCHG fully ordered
bpf, vsock: Drop static vsock_bpf_prot initialization
vsock: Update msg_count on read_skb()
vsock: Update rx_bytes on read_skb()
bpf, sockmap: SK_DROP on attempted redirects of unsupported af_vsock
selftests/bpf: Add asserts for netfilter link info
bpf: Fix link info netfilter flags to populate defrag flag
selftests/bpf: Add test for sign extension in coerce_subreg_to_size_sx()
selftests/bpf: Add test for truncation after sign extension in coerce_reg_to_size_sx()
bpf: Fix truncation bug in coerce_reg_to_size_sx()
selftests/bpf: Assert link info uprobe_multi count & path_size if unset
bpf: Fix unpopulated path_size when uprobe_multi fields unset
selftests/bpf: Fix cross-compiling urandom_read
selftests/bpf: Add test for kfunc module order
...
Don't mislead the callers of bpf_{sk,msg}_redirect_{map,hash}(): make sure
to immediately and visibly fail the forwarding of unsupported af_vsock
packets.
Fixes: 634f1a7110 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241013-vsock-fixes-for-redir-v2-1-d6577bbfe742@rbox.co
No one uses rtnl_register() and rtnl_register_module().
Let's remove them.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-12-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 1202cdd665 ("Remove DECnet support from kernel"),
NEIGH_DN_TABLE is no longer used.
MPLS has implicit dependency on it in nla_put_via(), but nla_get_via()
does not support DECnet.
Let's remove NEIGH_DN_TABLE.
Now, neigh_tables[] has only 2 elements and no extra iteration
for DECnet in many places.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241014235216.10785-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZw1/jBUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIO/ZwEAuAVkRgyuC0njVV9PyT7EbZqxHjY+
10v6I6XR8vWmILABALrTIR9wTOyBVgmZzW7AUq8wiFv9FSZmhJfp1KxPdNYA
=L6hT
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-10-14
The following pull-request contains BPF updates for your *net-next* tree.
We've added 21 non-merge commits during the last 18 day(s) which contain
a total of 21 files changed, 1185 insertions(+), 127 deletions(-).
The main changes are:
1) Put xsk sockets on a struct diet and add various cleanups. Overall, this helps
to bump performance by 12% for some workloads, from Maciej Fijalkowski.
2) Extend BPF selftests to increase coverage of XDP features in combination
with BPF cpumap, from Alexis Lothoré (eBPF Foundation).
3) Extend netkit with an option to delegate skb->{mark,priority} scrubbing to
its BPF program, from Daniel Borkmann.
4) Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs,
from Mahe Tardy.
5) Extend BPF selftests covering a BPF program setting socket options per MPTCP
subflow, from Geliang Tang and Nicolas Rybowski.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (21 commits)
xsk: Use xsk_buff_pool directly for cq functions
xsk: Wrap duplicated code to function
xsk: Carry a copy of xdp_zc_max_segs within xsk_buff_pool
xsk: Get rid of xdp_buff_xsk::orig_addr
xsk: s/free_list_node/list_node/
xsk: Get rid of xdp_buff_xsk::xskb_list_node
selftests/bpf: check program redirect in xdp_cpumap_attach
selftests/bpf: make xdp_cpumap_attach keep redirect prog attached
selftests/bpf: fix bpf_map_redirect call for cpu map test
selftests/bpf: add tcx netns cookie tests
bpf: add get_netns_cookie helper to tc programs
selftests/bpf: add missing header include for htons
selftests/bpf: Extend netkit tests to validate skb meta data
tools: Sync if_link.h uapi tooling header
netkit: Add add netkit scrub support to rt_link.yaml
netkit: Simplify netkit mode over to use NLA_POLICY_MAX
netkit: Add option for scrubbing skb meta data
bpf: Remove unused macro
selftests/bpf: Add mptcp subflow subtest
selftests/bpf: Add getsockopt to inspect mptcp subflow
...
====================
Link: https://patch.msgid.link/20241014211110.16562-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ip_send_unicast_reply() send orphaned 'control packets'.
These are RST packets and also ACK packets sent from TIME_WAIT.
Some eBPF programs would prefer to have a meaningful skb->sk
pointer as much as possible.
This means that TCP can now attach TIME_WAIT sockets to outgoing
skbs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This can be used to attach a socket to an skb,
taking a reference on sk->sk_refcnt.
This helper might be a NOP if sk->sk_refcnt is zero.
Use it from tcp_make_synack().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP stack is not attaching skb to TIME_WAIT sockets yet,
but we would like to allow this in the future.
Add sk_listener_or_tw() helper to detect the three states
that FQ needs to take care.
Like NEW_SYN_RECV, TIME_WAIT are not full sockets and
do not contain sk->sk_pacing_status, sk->sk_pacing_rate.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP will soon attach TIME_WAIT sockets to some ACK and RST.
Make sure sk_to_full_sk() detects this and does not return
a non full socket.
v3: also changed sk_const_to_full_sk()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This so we avoid dereferencing struct net_device within hot path.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20241007122458.282590-5-maciej.fijalkowski@intel.com
Continue the process of dieting xdp_buff_xsk by removing orig_addr
member. It can be calculated from xdp->data_hard_start where it was
previously used, so it is not anything that has to be carried around in
struct used widely in hot path.
This has been used for initializing xdp_buff_xsk::frame_dma during pool
setup and as a shortcut in xp_get_handle() to retrieve address provided
to xsk Rx queue.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20241007122458.282590-4-maciej.fijalkowski@intel.com
Now that free_list_node's purpose is two-folded, make it just a
'list_node'.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20241007122458.282590-3-maciej.fijalkowski@intel.com
Let's bring xdp_buff_xsk back to occupying 2 cachelines by removing
xskb_list_node - for the purpose of gathering the xskb frags
free_list_node can be used, head of the list (xsk_buff_pool::xskb_list)
stays as-is, just reuse the node ptr.
It is safe to do as a single xdp_buff_xsk can never reside in two
pool's lists simultaneously.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20241007122458.282590-2-maciej.fijalkowski@intel.com
Replace kfree_skb() with kfree_skb_reason() in vxlan_xmit(). Following
new skb drop reasons are introduced for vxlan:
/* no remote found for xmit */
SKB_DROP_REASON_VXLAN_NO_REMOTE
/* packet without necessary metadata reached a device which is
* in "external" mode
*/
SKB_DROP_REASON_TUNNEL_TXINFO
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the return type of vxlan_set_mac() from bool to enum
skb_drop_reason. In this commit, the drop reason
"SKB_DROP_REASON_LOCAL_MAC" is introduced for the case that the source
mac of the packet is a local mac.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the return type of vxlan_snoop() from bool to enum
skb_drop_reason. In this commit, two drop reasons are introduced:
SKB_DROP_REASON_MAC_INVALID_SOURCE
SKB_DROP_REASON_VXLAN_ENTRY_EXISTS
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce skb drop reasons to the function vxlan_rcv(). Following new
drop reasons are added:
SKB_DROP_REASON_VXLAN_INVALID_HDR
SKB_DROP_REASON_VXLAN_VNI_NOT_FOUND
SKB_DROP_REASON_IP_TUNNEL_ECN
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make skb_vlan_inet_prepare return the skb drop reasons, which is just
what pskb_may_pull_reason() returns. Meanwhile, adjust all the call of
it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the function pskb_inet_may_pull_reason() and make
pskb_inet_may_pull a simple inline call to it. The drop reasons of it just
come from pskb_may_pull_reason().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After we made sure no fib_seq_read() handlers needs RTNL anymore,
we can remove RTNL from fib_seq_sum().
Note that after RTNL was dropped, fib_seq_sum() result was possibly
outdated anyway.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using RTNL to protect ops->fib_rules_seq reads seems a big hammer.
Writes are protected by RTNL.
We can use READ_ONCE() when reading it.
Constify 'struct net' argument of fib6_tables_seq_read() and
fib6_rules_seq_read().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using RTNL to protect ops->fib_rules_seq reads seems a big hammer.
Writes are protected by RTNL.
We can use READ_ONCE() when reading it.
Constify 'struct net' argument of fib4_rules_seq_read()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using RTNL to protect ops->fib_rules_seq reads seems a big hammer.
Writes are protected by RTNL.
We can use READ_ONCE() on readers.
Constify 'struct net' argument of fib_rules_seq_read()
and lookup_rules_ops().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the secid in the netlbl_audit structure with an lsm_prop.
Remove scaffolding that was required when the value was a secid.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: fix the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
sysctl_tcp_l3mdev_accept is read from TCP receive fast path from
tcp_v6_early_demux(),
__inet6_lookup_established,
inet_request_bound_dev_if().
Move it to netns_ipv4_read_rx.
Remove the '#ifdef CONFIG_NET_L3_MASTER_DEV' that was guarding
its definition.
Note this adds a hole of three bytes that could be filled later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Wei Wang <weiwan@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Link: https://patch.msgid.link/20241010034100.320832-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the basic infrastructure to implement the net-shaper
core functionality. Each network devices carries a net-shaper cache,
the NL get() operation fetches the data from such cache.
The cache is initially empty, will be fill by the set()/group()
operation implemented later and is destroyed at device cleanup time.
The net_shaper_fill_handle(), net_shaper_ctx_init(), and
net_shaper_generic_pre() implementations handle generic index type
attributes, despite the current caller always pass a constant value
to avoid more noise in later patches using them with different
attributes.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/ddd10fd645a9367803ad02fca4a5664ea5ace170.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This allows a more uniform implementation of non-dump and dump
operations, and will be used later in the series to avoid some
per-operation allocation.
Additionally rename the NL_ASSERT_DUMP_CTX_FITS macro, to
fit a more extended usage.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/1130cc2896626b84587a2a5f96a5c6829638f4da.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since introduced, mctp has been ignoring the returned value of
rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: 583be982d9 ("mctp: Add device handling and netlink interface")
Fixes: 831119f887 ("mctp: Add neighbour netlink interface")
Fixes: 06d2f4c583 ("mctp: Add netlink route management")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before commit addf9b90de ("net: rtnetlink: use rcu to free rtnl message
handlers"), once rtnl_msg_handlers[protocol] was allocated, the following
rtnl_register_module() for the same protocol never failed.
However, after the commit, rtnl_msg_handler[protocol][msgtype] needs to
be allocated in each rtnl_register_module(), so each call could fail.
Many callers of rtnl_register_module() do not handle the returned error,
and we need to add many error handlings.
To handle that easily, let's add wrapper functions for bulk registration
of rtnetlink message handlers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The likely() annotation in l3mdev_master_ifindex_by_index() has been
found to be incorrect 100% of the time in real-world workloads (e.g.,
web servers).
Annotated branches shows the following in these servers:
correct incorrect % Function File Line
0 169053813 100 l3mdev_master_ifindex_by_index l3mdev.h 81
This is happening because l3mdev_master_ifindex_by_index() is called
from __inet_check_established(), which calls
l3mdev_master_ifindex_by_index() passing the socked bounded interface.
l3mdev_master_ifindex_by_index(net, sk->sk_bound_dev_if);
Since most sockets are not going to be bound to a network device,
the likely() is giving the wrong assumption.
Remove the likely() annotation to ensure more accurate branch
prediction.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241008163205.3939629-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Each IPv4 address could have a lifetime, which is useful for DHCP,
and GC is periodically executed as check_lifetime_work.
check_lifetime() does the actual GC under RTNL.
1. Acquire RTNL
2. Iterate inet_addr_lst
3. Remove IPv4 address if expired
4. Release RTNL
Namespacifying the GC is required for per-netns RTNL, but using the
per-netns hash table will shorten the time on the hash bucket iteration
under RTNL.
Let's add per-netns GC work and use the per-netns hash table.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241008172906.1326-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a prep for per-netns RTNL conversion, we want to namespacify
the IPv4 address hash table and the GC work.
Let's allocate the per-netns IPv4 address hash table to
net->ipv4.inet_addr_lst and link IPv4 addresses into it.
The actual users will be converted later.
Note that the IPv6 address hash table is already namespacified.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241008172906.1326-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to fib_validate_source(), instead of a plain u8,
to prevent accidental setting of ECN bits in ->flowi4_tos.
All callers of fib_validate_source() already have a dscp_t variable to
pass as parameter. We just need to remove the inet_dscp_to_dsfield()
conversions.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/08612a4519bc5a3578bb493fbaad82437ebb73dc.1728302212.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to ip_mc_validate_source(), instead of a plain
u8, to prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_mc_validate_source() to consider are:
* ip_route_input_mc() which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* udp_v4_early_demux() which gets the DSCP directly from the IPv4
header and can simply use the ip4h_dscp() helper.
Also, stop including net/inet_dscp.h in udp.c as we don't use any of
its declarations anymore.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c91b2cca04718b7ee6cf5b9c1d5b40507d65a8d4.1728302212.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to ip_route_use_hint(), instead of a plain u8,
to prevent accidental setting of ECN bits in ->flowi4_tos.
Only ip_rcv_finish_core() actually calls ip_route_use_hint(). Use the
ip4h_dscp() helper to get the DSCP from the IPv4 header.
While there, modify the declaration of ip_route_use_hint() in
include/net/route.h so that it matches the prototype of its
implementation in net/ipv4/route.c.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c40994fdf804db7a363d04fdee01bf48dddda676.1728302212.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Revert this, I neglected to take into account the fact that
cfg80211 itself can be a module, but wext is always builtin.
Fixes: aee809aaa2 ("wifi: cfg80211: unexport wireless_nlevent_flush()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfsrvl_getphyid() has been unused since 2011's commit
f362144084 ("caif: Use RCU and lists in cfcnfg.c for managing caif link layers")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241007004456.149899-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Let it be tuned in per netns by admins.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241005222609.94980-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `__struct_group()`
helper to create a new tagged `struct ieee80211_radiotap_header_fixed`.
This structure groups together all the members of the flexible
`struct ieee80211_radiotap_header` except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct members currently causing
trouble from `struct ieee80211_radiotap_header` to `struct
ieee80211_radiotap_header_fixed`.
We also want to ensure that in case new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
This approach avoids having to implement `struct ieee80211_radiotap_header_fixed`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
So, with these changes, fix the following warnings:
drivers/net/wireless/ath/wil6210/txrx.c:309:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2100.c:2521:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2200.h:1146:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/libipw.h:595:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:34:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:5:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:10:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:15:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:758:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:767:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZwBMtBZKcrzwU7l4@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add wiphy_delayed_work_pending() to check if any delayed work timer is
pending, that can be used to be sure that wiphy_delayed_work_queue()
won't postpone an already pending delayed work.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/20240924192805.13859-2-repk@triplefau.lt
[fix return value kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The goal is to break RTNL down into per-netns mutex.
This patch adds per-netns mutex and its helper functions, rtnl_net_lock()
and rtnl_net_unlock().
rtnl_net_lock() acquires the global RTNL and per-netns RTNL mutex, and
rtnl_net_unlock() releases them.
We will replace 800+ rtnl_lock() with rtnl_net_lock() and finally removes
rtnl_lock() in rtnl_net_lock().
When we need to nest per-netns RTNL mutex, we will use __rtnl_net_lock(),
and its locking order is defined by rtnl_net_lock_cmp_fn() as follows:
1. init_net is first
2. netns address ascending order
Note that the conversion will be done under CONFIG_DEBUG_NET_SMALL_RTNL
with LOCKDEP so that we can carefully add the extra mutex without slowing
down RTNL operations during conversion.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
No driver now uses the DSA switch phylink members, so we can now remove
the method pointers, but we need to leave empty shim functions to allow
those drivers that do not provide phylink MAC operations structure to
continue functioning.
Signed-off-by: Russell King (oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # sja1105, felix, dsa_loop
Link: https://patch.msgid.link/E1swKNV-0060oN-1b@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list.
Fixes: b8273570f8 ("genetlink: fix netns vs. netlink table locking (2)")
Cc: stable@vger.kernel.org
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241003104431.12391-1-a.kovaleva@yadro.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
delack timer is not stopped from inet_csk_clear_xmit_timer()
because we do not define INET_CSK_CLEAR_TIMERS.
This is a conscious choice : inet_csk_clear_xmit_timer()
is often called from another cpu. Calling del_timer()
would cause false sharing and lock contention.
This means that very often, tcp_delack_timer() is called
at the timer expiration, while there is no ACK to transmit.
This can be detected very early, avoiding the socket spinlock.
Notes:
- test about tp->compressed_ack is racy,
but in the unlikely case there is a race, the dedicated
compressed_ack_timer hrtimer would close it.
- Even if the fast path is not taken, reading
icsk->icsk_ack.pending and tp->compressed_ack
before acquiring the socket spinlock reduces
acquisition time and chances of contention.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241002173042.917928-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icsk->icsk_pending can be read locklessly already.
Following patch in the series will add another lockless read.
Add smp_load_acquire() and smp_store_release() annotations
because following patch will add a test in tcp_write_timer(),
and READ_ONCE()/WRITE_ONCE() alone would possibly lead to races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241002173042.917928-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last type of sockets which supports SOF_TIMESTAMPING_OPT_ID is RAW
sockets. To add new option this patch converts all callers (direct and
indirect) of _sock_tx_timestamp to provide sockcm_cookie instead of
tsflags. And while here fix __sock_tx_timestamp to receive tsflags as
__u32 instead of __u16.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://patch.msgid.link/20241001125716.2832769-3-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SOF_TIMESTAMPING_OPT_ID socket option flag gives a way to correlate TX
timestamps and packets sent via socket. Unfortunately, there is no way
to reliably predict socket timestamp ID value in case of error returned
by sendmsg. For UDP sockets it's impossible because of lockless
nature of UDP transmit, several threads may send packets in parallel. In
case of RAW sockets MSG_MORE option makes things complicated. More
details are in the conversation [1].
This patch adds new control message type to give user-space
software an opportunity to control the mapping between packets and
values by providing ID with each sendmsg for UDP sockets.
The documentation is also added in this patch.
[1] https://lore.kernel.org/netdev/CALCETrU0jB+kg0mhV6A8mrHfTE1D1pr1SD_B9Eaa9aDPfgHdtA@mail.gmail.com/
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://patch.msgid.link/20241001125716.2832769-2-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to ip_route_input_noref(), instead of a plain
u8, to prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input_noref() to consider are:
* arp_process() in net/ipv4/arp.c. This function sets the tos
parameter to 0, which is already a valid dscp_t value, so it
doesn't need to be adjusted for the new prototype.
* ip_route_input(), which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* ipvlan_l3_rcv(), bpf_lwt_input_reroute(), ip_expire(),
ip_rcv_finish_core(), xfrm4_rcv_encap_finish() and
xfrm4_rcv_encap(), which get the DSCP directly from IPv4 headers
and can simply use the ip4h_dscp() helper.
While there, declare the IPv4 header pointers as const in
ipvlan_l3_rcv() and bpf_lwt_input_reroute().
Also, modify the declaration of ip_route_input_noref() in
include/net/route.h so that it matches the prototype of its
implementation in net/ipv4/route.c.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/a8a747bed452519c4d0cc06af32c7e7795d7b627.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to ip_route_input(), instead of a plain u8, to
prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input() to consider are:
* input_action_end_dx4_finish() and input_action_end_dt4() in
net/ipv6/seg6_local.c. These functions set the tos parameter to 0,
which is already a valid dscp_t value, so they don't need to be
adjusted for the new prototype.
* icmp_route_lookup(), which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* br_nf_pre_routing_finish(), ip_options_rcv_srr() and ip4ip6_err(),
which get the DSCP directly from IPv4 headers. Define a helper to
read the .tos field of struct iphdr as dscp_t, so that these
function don't have to do the conversion manually.
While there, declare *iph as const in br_nf_pre_routing_finish(),
declare its local variables in reverse-christmas-tree order and move
the "err = ip_route_input()" assignment out of the conditional to avoid
checkpatch warning.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/e9d40781d64d3d69f4c79ac8a008b8d67a033e8d.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Through some experiments, we found out that increasing the default
RX buffers count from 512 to 1024, gives slightly better throughput
and significantly reduces the no_wqe_rx errs on the receiver side.
Along with these, other parameters like cpu usage, retrans seg etc
also show some improvement with 1024 value.
Following are some snippets from the experiments
ntttcp tests with 512 Rx buffers
---------------------------------------
connections| throughput| no_wqe errs|
---------------------------------------
1 | 40.93Gbps | 123,211 |
16 | 180.15Gbps | 190,120 |
128 | 180.20Gbps | 173,508 |
256 | 180.27Gbps | 189,884 |
ntttcp tests with 1024 Rx buffers
---------------------------------------
connections| throughput| no_wqe errs|
---------------------------------------
1 | 44.22Gbps | 19,864 |
16 | 180.19Gbps | 4,430 |
128 | 180.21Gbps | 2,560 |
256 | 180.29Gbps | 1,529 |
So, increasing the default RX buffers per queue count to 1024
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/1727667875-29908-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
There is a spelling mistake in a WARN_ONCE message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20240924080545.1324962-1-colin.i.king@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The series in the "fixes" tag added the ability to consider L4 attributes
in routing rules.
The dst lookup on the outer packet of encapsulated traffic in the xfrm
code was not adapted to this change, thus routing behavior that relies
on L4 information is not respected.
Pass the ip protocol information when performing dst lookups.
Fixes: a25724b05a ("Merge branch 'fib_rules-support-sport-dport-and-proto-match'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Preparation for adding more fields to dst lookup functions without
changing their signatures.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
-----BEGIN PGP SIGNATURE-----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=ZAan
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
* tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits)
Bluetooth: btintel_pcie: Allocate memory for driver private data
Bluetooth: btusb: Fix not handling ZPL/short-transfer
Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
Bluetooth: btsdio: Do not bind to non-removable CYW4373
Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED
Bluetooth: replace deprecated strncpy with strscpy_pad
Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED
Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B
Bluetooth: Use led_set_brightness() in LED trigger activate() callback
Bluetooth: btrtl: Use kvmemdup to simplify the code
Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
Bluetooth: btrtl: Add the support for RTL8922A
Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
Bluetooth: hci_conn: Remove redundant memset after kzalloc
Bluetooth: L2CAP: Remove unused declarations
dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855
Bluetooth: btnxpuart: Add support for ISO packets
Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h
Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
...
====================
Link: https://patch.msgid.link/20240912214317.3054060-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_SYSFS is not set, the kernel fails to compile:
net/core/page_pool_user.c:368:45: error: implicit declaration of function 'get_netdev_rx_queue_index' [-Werror=implicit-function-declaration]
368 | if (pool->slow.queue_idx == get_netdev_rx_queue_index(rxq)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
When CONFIG_SYSFS is not set, get_netdev_rx_queue_index() is not defined
as well.
Fix by removing the ifdef around get_netdev_rx_queue_index(). It is not
needed anymore after commit e817f85652 ("xdp: generic XDP handling of
xdp_rxq_info") removed most of the CONFIG_SYSFS ifdefs.
Fixes: 0f92140468 ("memory-provider: dmabuf devmem memory provider")
Cc: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20240913032824.2117095-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In tcp_recvmsg_locked(), detect if the skb being received by the user
is a devmem skb. In this case - if the user provided the MSG_SOCK_DEVMEM
flag - pass it to tcp_recvmsg_devmem() for custom handling.
tcp_recvmsg_devmem() copies any data in the skb header to the linear
buffer, and returns a cmsg to the user indicating the number of bytes
returned in the linear buffer.
tcp_recvmsg_devmem() then loops over the unaccessible devmem skb frags,
and returns to the user a cmsg_devmem indicating the location of the
data in the dmabuf device memory. cmsg_devmem contains this information:
1. the offset into the dmabuf where the payload starts. 'frag_offset'.
2. the size of the frag. 'frag_size'.
3. an opaque token 'frag_token' to return to the kernel when the buffer
is to be released.
The pages awaiting freeing are stored in the newly added
sk->sk_user_frags, and each page passed to userspace is get_page()'d.
This reference is dropped once the userspace indicates that it is
done reading this page. All pages are released when the socket is
destroyed.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240910171458.219195-10-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For device memory TCP, we expect the skb headers to be available in host
memory for access, and we expect the skb frags to be in device memory
and unaccessible to the host. We expect there to be no mixing and
matching of device memory frags (unaccessible) with host memory frags
(accessible) in the same skb.
Add a skb->devmem flag which indicates whether the frags in this skb
are device memory frags or not.
__skb_fill_netmem_desc() now checks frags added to skbs for net_iov,
and marks the skb as skb->devmem accordingly.
Add checks through the network stack to avoid accessing the frags of
devmem skbs and avoid coalescing devmem skbs with non devmem skbs.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-9-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement a memory provider that allocates dmabuf devmem in the form of
net_iov.
The provider receives a reference to the struct netdev_dmabuf_binding
via the pool->mp_priv pointer. The driver needs to set this pointer for
the provider in the net_iov.
The provider obtains a reference on the netdev_dmabuf_binding which
guarantees the binding and the underlying mapping remains alive until
the provider is destroyed.
Usage of PP_FLAG_DMA_MAP is required for this memory provide such that
the page_pool can provide the driver with the dma-addrs of the devmem.
Support for PP_FLAG_DMA_SYNC_DEV is omitted for simplicity & p.order !=
0.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-7-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert netmem to be a union of struct page and struct netmem. Overload
the LSB of struct netmem* to indicate that it's a net_iov, otherwise
it's a page.
Currently these entries in struct page are rented by the page_pool and
used exclusively by the net stack:
struct {
unsigned long pp_magic;
struct page_pool *pp;
unsigned long _pp_mapping_pad;
unsigned long dma_addr;
atomic_long_t pp_ref_count;
};
Mirror these (and only these) entries into struct net_iov and implement
netmem helpers that can access these common fields regardless of
whether the underlying type is page or net_iov.
Implement checks for net_iov in netmem helpers which delegate to mm
APIs, to ensure net_iov are never passed to the mm stack.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a netdev_dmabuf_binding struct which represents the
dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to
rx queues on the netdevice. On the binding, the dma_buf_attach
& dma_buf_map_attachment will occur. The entries in the sg_table from
mapping will be inserted into a genpool to make it ready
for allocation.
The chunks in the genpool are owned by a dmabuf_chunk_owner struct which
holds the dma-buf offset of the base of the chunk and the dma_addr of
the chunk. Both are needed to use allocations that come from this chunk.
We create a new type that represents an allocation from the genpool:
net_iov. We setup the net_iov allocation size in the
genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally
allocated by the page pool and given to the drivers.
The user can unbind the dmabuf from the netdevice by closing the netlink
socket that established the binding. We do this so that the binding is
automatically unbound even if the userspace process crashes.
The binding and unbinding leaves an indicator in struct netdev_rx_queue
that the given queue is bound, and the binding is actuated by resetting
the rx queue using the queue API.
The netdev_dmabuf_binding struct is refcounted, and releases its
resources only when all the refs are released.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add netdev_rx_queue_restart(), which resets an rx queue using the
queue API recently merged[1].
The queue API was merged to enable the core net stack to reset individual
rx queues to actuate changes in the rx queue's configuration. In later
patches in this series, we will use netdev_rx_queue_restart() to reset
rx queues after binding or unbinding dmabuf configuration, which will
cause reallocation of the page_pool to repopulate its memory using the
new configuration.
[1] https://lore.kernel.org/netdev/20240430231420.699177-1-shailend@google.com/T/
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
idpf: XDP chapter II: convert Tx completion to libeth
Alexander Lobakin says:
XDP for idpf is currently 5 chapters:
* convert Rx to libeth;
* convert Tx completion to libeth (this);
* generic XDP and XSk code changes;
* actual XDP for idpf via libeth_xdp;
* XSk for idpf (^).
Part II does the following:
* adds generic libeth Tx completion routines;
* converts idpf to use generic libeth Tx comp routines;
* fixes Tx queue timeouts and robustifies Tx completion in general;
* fixes Tx event/descriptor flushes (writebacks).
Most idpf patches again remove more lines than adds.
Generic Tx completion helpers and structs are needed as libeth_xdp
(Ch. III) makes use of them. WB_ON_ITR is needed since XDPSQs don't
want to work without it at all. Tx queue timeouts fixes are needed
since without them, it's way easier to catch a Tx timeout event when
WB_ON_ITR is enabled.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: enable WB_ON_ITR
idpf: fix netdev Tx queue stop/wake
idpf: refactor Tx completion routines
netdevice: add netdev_tx_reset_subqueue() shorthand
idpf: convert to libeth Tx buffer completion
libeth: add Tx buffer completion helpers
====================
Link: https://patch.msgid.link/20240909205323.3110312-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last -next "new features" pull request for v6.12. The stack now
supports DFS on MLO but otherwise nothing really standing out.
Major changes:
cfg80211/mac80211
* EHT rate support in AQL airtime
* DFS support for MLO
rtw89
* complete BT-coexistence code for RTL8852BT
* RTL8922A WoWLAN net-detect support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmbhVykRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtxgAf+J9om4LIpVd6hNT/hlkLf0jOlIkoOmbYT
16+g/dYRher0HJUMO/gcmubBO8dPmxopQEkR7XvkEqV72EAYcaDcios94cj0Uv1F
GbnixnO3VvCOE86PoOruM+WHT6ct9+ECWB6yODnF7Pps+WNrzhVTfmXm4j8vWnFH
KyHD/Hy4VsPDzj0EmzAC4ppkLMWfWypDbP4PBIOq9s+Oj6gJ671amWjmgFou+o9K
yOtNTBiBaVuBrkv5sJTbQIDkAvK2V9im2VTjrZej2a/3wm6+z3XM28tWbcsYJEyS
U2ZpHkS6QXlNaL4B8lDc6OP/c/xwM1CkzZsKe9p3T6iRemA0WLWaSg==
=gaJv
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.12
The last -next "new features" pull request for v6.12. The stack now
supports DFS on MLO but otherwise nothing really standing out.
Major changes:
cfg80211/mac80211
* EHT rate support in AQL airtime
* DFS support for MLO
rtw89
* complete BT-coexistence code for RTL8852BT
* RTL8922A WoWLAN net-detect support
* tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits)
wifi: brcmfmac: cfg80211: Convert comma to semicolon
wifi: rsi: Remove an unused field in struct rsi_debugfs
wifi: libertas: Cleanup unused declarations
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_bus_probe()
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_sdio_probe()
wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()
wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errors
wifi: cfg80211: fix kernel-doc for per-link data
wifi: mt76: mt7925: replace chan config with extend txpower config for clc
wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc
wifi: mt76: mt7615: check devm_kasprintf() returned value
wifi: mt76: mt7925: convert comma to semicolon
wifi: mt76: mt7925: fix a potential association failure upon resuming
wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warnings
wifi: mt76: mt7921: Check devm_kasprintf() returned value
wifi: mt76: mt7915: check devm_kasprintf() returned value
wifi: mt76: mt7915: avoid long MCU command timeouts during SER
wifi: mt76: mt7996: fix uninitialized TLV data
...
====================
Link: https://patch.msgid.link/20240911084147.A205DC4AF0F@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmbf6xAACgkQrB3Eaf9P
W7eZQA/9HuHTWBg0V43QDT1rjNnKult+uBKYpKrh045outqMs+cU8bsww5ZuIAKx
ktN66OCE67d7XeFttb9UAJUPqQ98RjwjVUOpjRJ5iRDtj2bmn/5VGSYuH7zx5so0
msFs5gkomo2ZZNjcMOSrDVGUoCdlHh1og5L2KN/FgztSA1smDdUBQOWNm1peezbI
eJFt2Q6KCNfzwPthmQte0dmDnK5gWPducereSx03tMuSyUmPML1zrzOFXBXSg09e
dAlDTxbAXZDrXS4Ii0y/FEM2Ugkjg9FXbE1kvM0i05GIc/SGnEBGEcdW5YbmRhOL
4JlLnpiLTmKTaIZ0GdpADv7XZMga6R01AalSPsJz+H7aNAHTKkK+SzQY4YXRucZy
SsASM39oRLzo9Bm4ZZ773Nw83cxBgO/ZixK4KVvCZI/1ftD+9zn72eqk+CeveSeE
ChaXGuWpRdfAOsgozFJNFx/ffK5qzxFKkIeN9KN0QYV/XJuZJ7nD6eQkH9ydgvTI
4cexY+cs4wgfdi9dDkVHPVhCR7mRlfi5r/VL8rtWWnWzR07okKF4rW6dgvx33m60
9MmF1/EdD2uh3CLcBMjNg6qXdC07VeDpFLqWs+utJvSHMuI43uE4FkRQui/J6T9N
RX7zzkFBsPvPpm5GHLx2u/wvnzX1co1Rk9xzbC+J6FEPlm2/0vI=
=ErGl
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-09-10
1) Remove an unneeded WARN_ON on packet offload.
From Patrisious Haddad.
2) Add a copy from skb_seq_state to buffer function.
This is needed for the upcomming IPTFS patchset.
From Christian Hopps.
3) Spelling fix in xfrm.h.
From Simon Horman.
4) Speed up xfrm policy insertions.
From Florian Westphal.
5) Add and revert a patch to support xfrm interfaces
for packet offload. This patch was just half cooked.
6) Extend usage of the new xfrm_policy_is_dead_or_sk helper.
From Florian Westphal.
7) Update comments on sdb and xfrm_policy.
From Florian Westphal.
8) Fix a null pointer dereference in the new policy insertion
code From Florian Westphal.
9) Fix an uninitialized variable in the new policy insertion
code. From Nathan Chancellor.
* tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: Restore dir assignments in xfrm_hash_rebuild()
xfrm: policy: fix null dereference
Revert "xfrm: add SA information to the offloaded packet"
xfrm: minor update to sdb and xfrm_policy comments
xfrm: policy: use recently added helper in more places
xfrm: add SA information to the offloaded packet
xfrm: policy: remove remaining use of inexact list
xfrm: switch migrate to xfrm_policy_lookup_bytype
xfrm: policy: don't iterate inexact policies twice at insert time
selftests: add xfrm policy insertion speed test script
xfrm: Correct spelling in xfrm.h
net: add copy from skb_seq_state to buffer function
xfrm: Remove documentation WARN_ON to limit return values for offloaded SA
====================
Link: https://patch.msgid.link/20240910065507.2436394-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DISCONNECTED.
Fixes: b644ba3369 ("Bluetooth: Update device_connected and device_found events to latest API")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a helper function hci_iso_hdr() to extract iso header from skb.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Software-side Tx buffers for storing DMA, frame size, skb pointers etc.
are pretty much generic and every driver defines them the same way. The
same can be said for software Tx completions -- same napi_consume_skb()s
and all that...
Add a couple simple wrappers for doing that to stop repeating the old
tale at least within the Intel code. Drivers are free to use 'priv'
member at the end of the structure.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There cannot be brackets in kernel-doc, remove them.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 62c16f219a ("wifi: cfg80211: move DFS related members to links[] in wireless_dev")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----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=Uxb1
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
Patch #1 adds ctnetlink support for kernel side filtering for
deletions, from Changliang Wu.
Patch #2 updates nft_counter support to Use u64_stats_t,
from Sebastian Andrzej Siewior.
Patch #3 uses kmemdup_array() in all xtables frontends,
from Yan Zhen.
Patch #4 is a oneliner to use ERR_CAST() in nf_conntrack instead
opencoded casting, from Shen Lichuan.
Patch #5 removes unused argument in nftables .validate interface,
from Florian Westphal.
Patch #6 is a oneliner to correct a typo in nftables kdoc,
from Simon Horman.
Patch #7 fixes missing kdoc in nftables, also from Simon.
Patch #8 updates nftables to handle timeout less than CONFIG_HZ.
Patch #9 rejects element expiration if timeout is zero,
otherwise it is silently ignored.
Patch #10 disallows element expiration larger than timeout.
Patch #11 removes unnecessary READ_ONCE annotation while mutex is held.
Patch #12 adds missing READ_ONCE/WRITE_ONCE annotation in dynset.
Patch #13 annotates data-races around element expiration.
Patch #14 allocates timeout and expiration in one single set element
extension, they are tighly couple, no reason to keep them
separated anymore.
Patch #15 updates nftables to interpret zero timeout element as never
times out. Note that it is already possible to declare sets
with elements that never time out but this generalizes to all
kind of set with timeouts.
Patch #16 supports for element timeout and expiration updates.
* tag 'nf-next-24-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: set element timeout update support
netfilter: nf_tables: zero timeout means element never times out
netfilter: nf_tables: consolidate timeout extension for elements
netfilter: nf_tables: annotate data-races around element expiration
netfilter: nft_dynset: annotate data-races around set timeout
netfilter: nf_tables: remove annotation to access set timeout while holding lock
netfilter: nf_tables: reject expiration higher than timeout
netfilter: nf_tables: reject element expiration with no timeout
netfilter: nf_tables: elements with timeout below CONFIG_HZ never expire
netfilter: nf_tables: Add missing Kernel doc
netfilter: nf_tables: Correct spelling in nf_tables.h
netfilter: nf_tables: drop unused 3rd argument from validate callback ops
netfilter: conntrack: Convert to use ERR_CAST()
netfilter: Use kmemdup_array instead of kmemdup for multiple allocation
netfilter: nft_counter: Use u64_stats_t for statistic.
netfilter: ctnetlink: support CTA_FILTER for flush
====================
Link: https://patch.msgid.link/20240905232920.5481-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently DFS works under assumption there could be only one channel
context in the hardware. Hence, drivers just calls the function
ieee80211_radar_detected() passing the hardware structure. However, with
MLO, this obviously will not work since number of channel contexts will be
more than one and hence drivers would need to pass the channel information
as well on which the radar is detected.
Also, when radar is detected in one of the links, other link's CAC should
not be cancelled.
Hence, in order to support DFS with MLO, do the following changes -
* Add channel context conf pointer as an argument to the function
ieee80211_radar_detected(). During MLO, drivers would have to pass on
which channel context conf radar is detected. Otherwise, drivers could
just pass NULL.
* ieee80211_radar_detected() will iterate over all channel contexts
present and
* if channel context conf is passed, only mark that as radar
detected
* if NULL is passed, then mark all channel contexts as radar
detected
* Then as usual, schedule the radar detected work.
* In the worker, go over all the contexts again and for all such context
which is marked with radar detected, cancel the ongoing CAC by calling
ieee80211_dfs_cac_cancel() and then notify cfg80211 via
cfg80211_radar_event().
* To cancel the CAC, pass the channel context as well where radar is
detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is
canceled only on the links using the provided context, leaving other
links unaffected.
This would also help in scenarios where there is split phy 5 GHz radio,
which is capable of DFS channels in both lower and upper band. In this
case, simultaneous radars can be detected.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, during starting a radar detection, no link id information is
parsed and passed down. In order to support starting radar detection
during Multi Link Operation, it is required to pass link id as well.
Add changes to first parse and then pass link id in the start radar
detection path.
Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.
However, everything is handled at link 0 only until all API's are ready to
handle it per link.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A few members related to DFS handling are currently under per wireless
device data structure. However, in order to support DFS with MLO, there is
a need to have them on a per-link manner.
Hence, as a preliminary step, move members cac_started, cac_start_time
and cac_time_ms to be on a per-link basis.
Since currently, link ID is not known at all places, use default value of
0 for now.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex has recently started to see active development which is good
news. rtw89 is also under active development and got several new
features. Otherwise not really anything out of ordinary.
We have one conflict in ath12k but that's easy to fix:
https://lore.kernel.org/all/20240808104348.6846e064@canb.auug.org.au/
Major changes:
mwifiex
* support for up to ten Authentication and Key Management (AKM) suites
* host MAC Sublayer Management Entity (MLME) client and AP mode support
* WPA-PSK-SHA256 AKM suite support
rtw88
* improve USB performance by aggregation
rtw89
* Wi-Fi 6 chip RTL8852BE-VT support
* WoWLAN net-detect support
* hardware encryption in unicast management frames support
* hardware rfkill support
ath12k
* DebugFS support for transmit DE stats
* Make ASPM support hardware-dependent
iwlwifi
* channel puncturing for US/CAN from UEFI
* bump FW API to 93 for BZ/SC devices
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmbYfCARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt+Qwf/X9oQ4sf8jV6eOV7EhoWhIHnQadvo5YBZ
ulBm8In0QGjEOVWkI7kXGabKP5jhne2lVIyP1eFfP2/td/A2yDWIuEeBfDQD6f4K
aiUGAa1gs4ZtGKJBniw/ukflSqJlR99N2qBO5T/smDm3Nw/aC522SO7BoLTpoJDQ
SuW4atFHMShXYf/vIrAA2yB9ok2yw/QM+27M9qjj6D7zzqsQxDl9wKGW+2v8KiSa
rXXbfnwfaQP21CYv5xYbEPACSRSV5Dr0TNopivWYxmm9svjLzwFN2JM2fHPxBEDh
wP6Ojp+Z32c1VbQtclLrwIQdlZ5yhU5MEDlVg5VLym9F83hv+oXTbA==
=lgVx
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d1 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b4 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org
Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RT_TOS() from include/uapi/linux/in_route.h is defined using
IPTOS_TOS_MASK from include/uapi/linux/ip.h. This is problematic for
files such as include/net/ip_fib.h that want to use RT_TOS() as without
including both header files kernel compilation fails:
In file included from ./include/net/ip_fib.h:25,
from ./include/net/route.h:27,
from ./include/net/lwtunnel.h:9,
from net/core/dst.c:24:
./include/net/ip_fib.h: In function ‘fib_dscp_masked_match’:
./include/uapi/linux/in_route.h:31:32: error: ‘IPTOS_TOS_MASK’ undeclared (first use in this function)
31 | #define RT_TOS(tos) ((tos)&IPTOS_TOS_MASK)
| ^~~~~~~~~~~~~~
./include/net/ip_fib.h:440:45: note: in expansion of macro ‘RT_TOS’
440 | return dscp == inet_dsfield_to_dscp(RT_TOS(fl4->flowi4_tos));
Therefore, cited commit changed linux/in_route.h to include linux/ip.h.
However, as reported by David, this breaks iproute2 compilation due
overlapping definitions between linux/ip.h and
/usr/include/netinet/ip.h:
In file included from ../include/uapi/linux/in_route.h:5,
from iproute.c:19:
../include/uapi/linux/ip.h:25:9: warning: "IPTOS_TOS" redefined
25 | #define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK)
| ^~~~~~~~~
In file included from iproute.c:17:
/usr/include/netinet/ip.h:222:9: note: this is the location of the previous definition
222 | #define IPTOS_TOS(tos) ((tos) & IPTOS_TOS_MASK)
Fix by changing include/net/ip_fib.h to include linux/ip.h. Note that
usage of RT_TOS() should not spread further in the kernel due to recent
work in this area.
Fixes: 1fa3314c14 ("ipv4: Centralize TOS matching")
Reported-by: David Ahern <dsahern@kernel.org>
Closes: https://lore.kernel.org/netdev/2f5146ff-507d-4cab-a195-b28c0c9e654e@kernel.org/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20240903133554.2807343-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mana_set_channels() function requires detaching the mana
driver and reattaching it with changed channel values.
During this operation if the system is low on memory, the reattach
might fail, causing the network device being down.
To avoid this we pre-allocate buffers at the beginning of set operation,
to prevent complete network loss
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1725248734-21760-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently napi_disable() gets called during rxq and txq cleanup,
even before napi is enabled and hrtimer is initialized. It causes
kernel panic.
? page_fault_oops+0x136/0x2b0
? page_counter_cancel+0x2e/0x80
? do_user_addr_fault+0x2f2/0x640
? refill_obj_stock+0xc4/0x110
? exc_page_fault+0x71/0x160
? asm_exc_page_fault+0x27/0x30
? __mmdrop+0x10/0x180
? __mmdrop+0xec/0x180
? hrtimer_active+0xd/0x50
hrtimer_try_to_cancel+0x2c/0xf0
hrtimer_cancel+0x15/0x30
napi_disable+0x65/0x90
mana_destroy_rxq+0x4c/0x2f0
mana_create_rxq.isra.0+0x56c/0x6d0
? mana_uncfg_vport+0x50/0x50
mana_alloc_queues+0x21b/0x320
? skb_dequeue+0x5f/0x80
Cc: stable@vger.kernel.org
Fixes: e1b5683ff6 ("net: mana: Move NAPI from EQ to CQ")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2024-09-01
Simon Horman catched two typos in our headers. No functional change.
* tag 'ieee802154-for-net-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
ieee802154: Correct spelling in nl802154.h
mac802154: Correct spelling in mac802154.h
====================
Link: https://patch.msgid.link/20240901184213.2303047-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store new timeout and expiration in transaction object, use them to
update elements from .commit path. Otherwise, discard update if .abort
path is exercised.
Use update_flags in the transaction to note whether the timeout,
expiration, or both need to be updated.
Annotate access to timeout extension now that it can be updated while
lockless read access is possible.
Reject timeout updates on elements with no timeout extension.
Element transaction remains in the 96 bytes kmalloc slab on x86_64 after
this update.
This patch requires ("netfilter: nf_tables: use timestamp to check for
set element timeout") to make sure an element does not expire while
transaction is ongoing.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch uses zero as timeout marker for those elements that never expire
when the element is created.
If userspace provides no timeout for an element, then the default set
timeout applies. However, if no default set timeout is specified and
timeout flag is set on, then timeout extension is allocated and timeout
is set to zero to allow for future updates.
Use of zero a never timeout marker has been suggested by Phil Sutter.
Note that, in older kernels, it is already possible to define elements
that never expire by declaring a set with the set timeout flag set on
and no global set timeout, in this case, new element with no explicit
timeout never expire do not allocate the timeout extension, hence, they
never expire. This approach makes it complicated to accomodate element
timeout update, because element extensions do not support reallocations.
Therefore, allocate the timeout extension and use the new marker for
this case, but do not expose it to userspace to retain backward
compatibility in the set listing.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Expiration and timeout are stored in separated set element extensions,
but they are tightly coupled. Consolidate them in a single extension to
simplify and prepare for set element updates.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
element expiration can be read-write locklessly, it can be written by
dynset and read from netlink dump, add annotation.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Correct spelling in iw_handler.h.
As reported by codespell.
Also, while the "few shortcomings" line is being updated,
correct its grammar.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240903-wifi-spell-v2-1-bfcf7062face@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Add missing documentation of struct field and enum items.
- Add missing documentation of function parameter.
Flagged by ./scripts/kernel-doc -none.
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Correct spelling in nf_tables.h.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The function returns a value that is used to initialize 'flowi4_tos'
before being passed to the FIB lookup API in the following call chain:
xfrm_bundle_create()
tos = xfrm_get_tos(fl, family)
xfrm_dst_lookup(..., tos, ...)
__xfrm_dst_lookup(..., tos, ...)
xfrm4_dst_lookup(..., tos, ...)
__xfrm4_dst_lookup(..., tos, ...)
fl4->flowi4_tos = tos
__ip_route_output_key(net, fl4)
Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Remove IPTOS_RT_MASK since it is no longer used.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is used by a few socket types to retrieve the TOS value
with which to perform the FIB lookup for packets sent through the socket
(flowi4_tos). If a DS field was passed using the IP_TOS control message,
then it is used. Otherwise the one specified via the IP_TOS socket
option.
Unmask the upper DSCP bits so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is used to read the DS field that was stored in IPv4
sockets via the IP_TOS socket option so that it could be used to
initialize the flowi4_tos field before resolving an output route.
Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This introduces hci_cmd_sync_run/hci_cmd_sync_run_once which acts like
hci_cmd_sync_queue/hci_cmd_sync_queue_once but runs immediately when
already on hdev->cmd_sync_work context.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Correct spelling in nl802154.h.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-ID: <20240829-wpan-spell-v1-2-799d840e02c4@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Correct spelling in mac802154.h.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-ID: <20240829-wpan-spell-v1-1-799d840e02c4@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Previous patch made ICMP rate limits per netns, it makes sense
to allow each netns to change the associated sysctl.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Host wide ICMP ratelimiter should be per netns, to provide better isolation.
Following patch in this series makes the sysctl per netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.
Fixes: c0303efeab ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d54 ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=baH4
-----END PGP SIGNATURE-----
Merge tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes
payload from netdev/egress by subtracting skb_network_offset() when
validating IPv4 packet length, otherwise 'meta l4proto udp' never
matches.
Patch #2 subtracts skb_network_offset() when validating IPv6 packet
length for netdev/egress.
netfilter pull request 24-08-28
* tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation
netfilter: nf_tables: restore IP sanity checks for netdev/egress
====================
Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Typically, busy-polling durations are below 100 usec.
When/if the busy-poller thread migrates to another cpu,
local_clock() can be off by +/-2msec or more for small
values of HZ, depending on the platform.
Use ktimer_get_ns() to ensure deterministic behavior,
which is the whole point of busy-polling.
Fixes: 0602129286 ("net: add low latency socket poll")
Fixes: 9a3c71aa80 ("net: convert low latency sockets to sched_clock()")
Fixes: 3708983452 ("sched, net: Fixup busy_loop_us_clock()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240827114916.223377-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using a volatile qualifier for a specific struct field is unusual.
Use instead READ_ONCE()/WRITE_ONCE() where necessary.
tcp_timewait_state_process() can change tw_substate while other
threads are reading this field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20240827015250.3509197-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The spd is no longer maintained as a linear list.
We also haven't been caching bundles in the xfrm_policy
struct since 2010.
While at it, add kdoc style comments for the xfrm_policy structure
and extend the description of the current rbtree based search to
mention why it needs to search the candidate set.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently the values of WQs for RX and TX queues for MANA devices
are hardcoded to default sizes.
Allow configuring these values for MANA devices as ringparam
configuration(get/set) through ethtool_ops.
Pre-allocate buffers at the beginning of this operation, to
prevent complete network loss in low-memory conditions.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://patch.msgid.link/1724688461-12203-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From netdev/egress, skb->len can include the ethernet header, therefore,
subtract network offset from skb->len when validating IPv6 packet length.
Fixes: 42df6e1d22 ("netfilter: Introduce egress hook")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Drivers need to purge TX SKB when stopping. Using skb_queue_purge() can't
report TX status to mac80211, causing ieee80211_free_ack_frame() warns
"Have pending ack frames!". Export ieee80211_purge_tx_queue() for drivers
to not have to reimplement it.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240822014255.10211-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers may at times want to iterate their stations with a function
which requires some non-atomic operations.
ieee80211_iterate_stations_mtx() introduces an API to iterate stations
while holding that wiphy's mutex. This allows the iterating function to
do non-atomic operations safely.
Signed-off-by: Rory Little <rory@candelatech.com>
Link: https://patch.msgid.link/20240806004024.2014080-2-rory@candelatech.com
[unify internal list iteration functions]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
lib80211_register_crypto_ops() and lib80211_unregister_crypto_ops() don't
modify their "struct lib80211_crypto_ops *ops" argument. So, it can be
declared as const.
Doing so, some adjustments are needed to also constify some date in
"struct lib80211_crypt_data", "struct lib80211_crypto_alg" and the
return value of lib80211_get_crypto_ops().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c74085e02f33a11327582b19c9f51c3236e85ae2.1722839425.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce 'ieee80211_mgmt_ba()' to avoid code duplication between
'ieee80211_send_addba_resp()', 'ieee80211_send_addba_request()',
and 'ieee80211_send_delba()', ensure that all related addresses
are '__aligned(2)', and prefer convenient 'ether_addr_copy()'
over generic 'memcpy()'. No functional changes expected.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240725090925.6022-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Correct spelling in sctp.h and structs.h.
As reported by codespell.
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20240822-net-spell-v1-10-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling in NFC headers.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-8-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling in bond_3ad.h and bond_alb.h.
As reported by codespell.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-5-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling in iucv.h
As reported by codespell.
Cc: Alexandra Winter <wintera@linux.ibm.com>
Cc: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-2-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmbHtrsACgkQ1V2XiooU
IOTZ8g/+OW8W468NmBHA2zrTWei19irA1iCBLvXMPakice0+ADU51eqVp6uUrCeP
iBUZGMtCq4WzFBrAEBePK3UNxxMHquWvAsA0kO/XW95KVM++s9ykF62q89jugMb3
CADEv/TxgJrkzpLWclxHNTCWMKpURijlkjT+kCMR4fKbeQnB6e/jI+2sdl7l5iRG
tHHm8ieewNNKE+jlSUJUrPEIM3tXRaZh9+JmbClfsF6wUw7qLmT/7P92aHBX4Owp
tpqi/Xc5/2k+Ud96a8u1NYrLLG+L70uz3SaeE7PvhaRavFuYftk2XLB4L2umtEfb
ZCZO/lCadH23XrVAUs5EtCDk4Tu3rZdTDsKYm2qS66uBsh/e6hg+j/cIPSO8jsNq
5Zbs/XzPFJ1PUpXVy8Sfs9vxH+cDuiqhy9nfKrbQotsqtoW+z52UoFH4WAjfmpqb
XMI+yeSTXYl1KIo2LV408VFRFRGcstBvXE7bOn7ufSrltRZcFdx7wqQBgVbh1zvA
1NTzIguZ+Lf2hPcNLPQd/f2vghKRTI7gUwzlDRw6so6NOWUM6/yV5KyoiZKekHjC
S6+M8cdiyMH8DmSsvAb46YKtDxYuIHqLVxuVqjfBHrMo1hLIo5smMCeCRA1Vabd5
/E4DTwpN5tVWX+HZl1wcAtQpXhcTktWM0qGSPnlRS11gwbAGWvk=
=O8tu
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
Patch #1 fix checksum calculation in nfnetlink_queue with SCTP,
segment GSO packet since skb_zerocopy() does not support
GSO_BY_FRAGS, from Antonio Ojea.
Patch #2 extend nfnetlink_queue coverage to handle SCTP packets,
from Antonio Ojea.
Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink,
from Donald Hunter.
Patch #4 adds a dedicate commit list for sets to speed up
intra-transaction lookups, from Florian Westphal.
Patch #5 skips removal of element from abort path for the pipapo
backend, ditching the shadow copy of this datastructure
is sufficient.
Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to
let users of conncoiunt decide when to enable conntrack,
this is needed by openvswitch, from Xin Long.
Patch #7 pass context to all nft_parse_register_load() in
preparation for the next patch.
Patches #8 and #9 reject loads from uninitialized registers from
control plane to remove register initialization from
datapath. From Florian Westphal.
* tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: don't initialize registers in nft_do_chain()
netfilter: nf_tables: allow loads only when register is initialized
netfilter: nf_tables: pass context structure to nft_parse_register_load
netfilter: move nf_ct_netns_get out of nf_conncount_init
netfilter: nf_tables: do not remove elements if set backend implements .abort
netfilter: nf_tables: store new sets in dedicated list
netfilter: nfnetlink: convert kfree_skb to consume_skb
selftests: netfilter: nft_queue.sh: sctp coverage
netfilter: nfnetlink_queue: unbreak SCTP traffic
====================
Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subtract network offset to skb->len before performing IPv4 header sanity
checks, then adjust transport offset from offset from mac header.
Jorge Ortiz says:
When small UDP packets (< 4 bytes payload) are sent from eth0,
`meta l4proto udp` condition is not met because `NFT_PKTINFO_L4PROTO` is
not set. This happens because there is a comparison that checks if the
transport header offset exceeds the total length. This comparison does
not take into account the fact that the skb network offset might be
non-zero in egress mode (e.g., 14 bytes for Ethernet header).
Fixes: 0ae8e4cca7 ("netfilter: nf_tables: set transport offset from mac header for netdev/egress")
Reported-by: Jorge Ortiz <jorge.ortiz.escribano@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No consumers anymore, remove it. After this, insertion of policies
no longer require list walk of all inexact policies but only those
that are reachable via the candidate sets.
This gives almost linear insertion speeds provided the inserted
policies are for non-overlapping networks.
Before:
Inserted 1000 policies in 70 ms
Inserted 10000 policies in 1155 ms
Inserted 100000 policies in 216848 ms
After:
Inserted 1000 policies in 56 ms
Inserted 10000 policies in 478 ms
Inserted 100000 policies in 4580 ms
Insertion of 1m entries takes about ~40s after this change
on my test vm.
Cc: Noel Kuntze <noel@familie-kuntze.de>
Cc: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Correct spelling in xfrm.h.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973d ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb7 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TOS field in the IPv4 flow information structure ('flowi4_tos') is
matched by the kernel against the TOS selector in IPv4 rules and routes.
The field is initialized differently by different call sites. Some treat
it as DSCP (RFC 2474) and initialize all six DSCP bits, some treat it as
RFC 1349 TOS and initialize it using RT_TOS() and some treat it as RFC
791 TOS and initialize it using IPTOS_RT_MASK.
What is common to all these call sites is that they all initialize the
lower three DSCP bits, which fits the TOS definition in the initial IPv4
specification (RFC 791).
Therefore, the kernel only allows configuring IPv4 FIB rules that match
on the lower three DSCP bits which are always guaranteed to be
initialized by all call sites:
# ip -4 rule add tos 0x1c table 100
# ip -4 rule add tos 0x3c table 100
Error: Invalid tos.
While this works, it is unlikely to be very useful. RFC 791 that
initially defined the TOS and IP precedence fields was updated by RFC
2474 over twenty five years ago where these fields were replaced by a
single six bits DSCP field.
Extending FIB rules to match on DSCP can be done by adding a new DSCP
selector while maintaining the existing semantics of the TOS selector
for applications that rely on that.
A prerequisite for allowing FIB rules to match on DSCP is to adjust all
the call sites to initialize the high order DSCP bits and remove their
masking along the path to the core where the field is matched on.
However, making this change alone will result in a behavior change. For
example, a forwarded IPv4 packet with a DS field of 0xfc will no longer
match a FIB rule that was configured with 'tos 0x1c'.
This behavior change can be avoided by masking the upper three DSCP bits
in 'flowi4_tos' before comparing it against the TOS selectors in FIB
rules and routes.
Implement the above by adding a new function that checks whether a given
DSCP value matches the one specified in the IPv4 flow information
structure and invoke it from the three places that currently match on
'flowi4_tos'.
Use RT_TOS() for the masking of 'flowi4_tos' instead of IPTOS_RT_MASK
since the latter is not uAPI and we should be able to remove it at some
point.
Include <linux/ip.h> in <linux/in_route.h> since the former defines
IPTOS_TOS_MASK which is used in the definition of RT_TOS() in
<linux/in_route.h>.
No regressions in FIB tests:
# ./fib_tests.sh
[...]
Tests passed: 218
Tests failed: 0
And FIB rule tests:
# ./fib_rule_tests.sh
[...]
Tests passed: 116
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reject rules where a load occurs from a register that has not seen a store
early in the same rule.
commit 4c905f6740 ("netfilter: nf_tables: initialize registers in
nft_do_chain()")
had to add a unconditional memset to the nftables register space to avoid
leaking stack information to userspace.
This memset shows up in benchmarks. After this change, this commit can
be reverted again.
Note that this breaks userspace compatibility, because theoretically
you can do
rule 1: reg2 := meta load iif, reg2 == 1 jump ...
rule 2: reg2 == 2 jump ... // read access with no store in this rule
... after this change this is rejected.
Neither nftables nor iptables-nft generate such rules, each rule is
always standalone.
This resuts in a small increase of nft_ctx structure by sizeof(long).
To cope with hypothetical rulesets like the example above one could emit
on-demand "reg[x] = 0" store when generating the datapath blob in
nf_tables_commit_chain_prepare().
A patch that does this is linked to below.
For now, lets disable this. In nf_tables, a rule is the smallest
unit that can be replaced from userspace, i.e. a hypothetical ruleset
that relies on earlier initialisations of registers can't be changed
at will as register usage would need to be coordinated.
Link: https://lore.kernel.org/netfilter-devel/20240627135330.17039-4-fw@strlen.de/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch is to move nf_ct_netns_get() out of nf_conncount_init()
and let the consumers of nf_conncount decide if they want to turn
on netfilter conntrack.
It makes nf_conncount more flexible to be used in other places and
avoids netfilter conntrack turned on when using it in openvswitch
conntrack.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_set_lookup_byid() is very slow when transaction becomes large, due to
walk of the transaction list.
Add a dedicated list that contains only the new sets.
Before: nft -f ruleset 0.07s user 0.00s system 0% cpu 1:04.84 total
After: nft -f ruleset 0.07s user 0.00s system 0% cpu 30.115 total
.. where ruleset contains ~10 sets with ~100k elements.
The above number is for a combined flush+reload of the ruleset.
With previous flush, even the first NEWELEM has to walk through a few
hundred thousands of DELSET(ELEM) transactions before the first NEWSET
object. To cope with random-order-newset-newsetelem we'd need to replace
commit_set_list with a hashtable.
Expectation is that a NEWELEM operation refers to the most recently added
set, so last entry of the dedicated list should be the set we want.
NB: This is not a bug fix per se (functionality is fine), but with
larger transaction batches list search takes forever, so it would be
nice to speed this up for -stable too, hence adding a "fixes" tag.
Fixes: 958bee14d0 ("netfilter: nf_tables: use new transaction infrastructure to handle sets")
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
- MGMT: Add error handling to pair_device()
- HCI: Invert LE State quirk to be opt-out rather then opt-in
- hci_core: Fix LE quote calculation
- SMP: Fix assumption of Central always being Initiator
-----BEGIN PGP SIGNATURE-----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=CjpO
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: Add error handling to pair_device()
- HCI: Invert LE State quirk to be opt-out rather then opt-in
- hci_core: Fix LE quote calculation
- SMP: Fix assumption of Central always being Initiator
* tag 'for-net-2024-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Add error handling to pair_device()
Bluetooth: SMP: Fix assumption of Central always being Initiator
Bluetooth: hci_core: Fix LE quote calculation
Bluetooth: HCI: Invert LE State quirk to be opt-out rather then opt-in
====================
Link: https://patch.msgid.link/20240815171950.1082068-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Through code analysis, I realized that the ds->untag_bridge_pvid logic
is contradictory - see the newly added FIXME above the kernel-doc for
dsa_software_untag_vlan_unaware_bridge().
Moreover, for the Felix driver, I need something very similar, but which
is actually _not_ contradictory: untag the bridge PVID on RX, but for
VLAN-aware bridges. The existing logic does it for VLAN-unaware bridges.
Since I don't want to change the functionality of drivers which were
supposedly properly tested with the ds->untag_bridge_pvid flag, I have
introduced a new one: ds->untag_vlan_aware_bridge_pvid, and I have
refactored the DSA reception code into a common path for both flags.
TODO: both flags should be unified under a single ds->software_vlan_untag,
which users of both current flags should set. This is not something that
can be carried out right away. It needs very careful examination of all
drivers which make use of this functionality, since some of them
actually get this wrong in the first place.
For example, commit 9130c2d30c ("net: dsa: microchip: ksz8795: Use
software untagging on CPU port") uses this in a driver which has
ds->configure_vlan_while_not_filtering = true. The latter mechanism has
been known for many years to be broken by design:
https://lore.kernel.org/netdev/CABumfLzJmXDN_W-8Z=p9KyKUVi_HhS7o_poBkeKHS2BkAiyYpw@mail.gmail.com/
and we have the situation of 2 bugs canceling each other. There is no
private VLAN, and the port follows the PVID of the VLAN-unaware bridge.
So, it's kinda ok for that driver to use the ds->untag_bridge_pvid
mechanism, in a broken way.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
INFINITY_LIFE_TIME is the common value used in IPv4 and IPv6 but defined
in both .c files.
Also, 0xffffffff used in addrconf_timeout_fixup() is INFINITY_LIFE_TIME.
Let's move INFINITY_LIFE_TIME's definition to addrconf.h
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240809235406.50187-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This inverts the LE State quirk so by default we assume the controllers
would report valid states rather than invalid which is how quirks
normally behave, also this would result in HCI command failing it the LE
States are really broken thus exposing the controllers that are really
broken in this respect.
Link: https://github.com/bluez/bluez/issues/584
Fixes: 220915857e ("Bluetooth: Adding driver and quirk defs for multi-role LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
After a vsock socket has been added to a BPF sockmap, its prot->recvmsg
has been replaced with vsock_bpf_recvmsg(). Thus the following
recursiion could happen:
vsock_bpf_recvmsg()
-> __vsock_recvmsg()
-> vsock_connectible_recvmsg()
-> prot->recvmsg()
-> vsock_bpf_recvmsg() again
We need to fix it by calling the original ->recvmsg() without any BPF
sockmap logic in __vsock_recvmsg().
Fixes: 634f1a7110 ("vsock: support sockmap")
Reported-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com
Tested-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com
Cc: Bobby Eshleman <bobby.eshleman@bytedance.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240812022153.86512-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After napi_complete_done() is called when NAPI is polling in the current
process context, another NAPI may be scheduled and start running in
softirq on another CPU and may ring the doorbell before the current CPU
does. When combined with unnecessary rings when there is no need to arm
the CQ, it triggers error paths in the hardware.
This patch fixes this by calling napi_complete_done() after doorbell
rings. It limits the number of unnecessary rings when there is
no need to arm. MANA hardware specifies that there must be one doorbell
ring every 8 CQ wraparounds. This driver guarantees one doorbell ring as
soon as the number of consumed CQEs exceeds 4 CQ wraparounds. In practical
workloads, the 4 CQ wraparounds proves to be big enough that it rarely
exceeds this limit before all the napi weight is consumed.
To implement this, add a per-CQ counter cq->work_done_since_doorbell,
and make sure the CQ is armed as soon as passing 4 wraparounds of the CQ.
Cc: stable@vger.kernel.org
Fixes: e1b5683ff6 ("net: mana: Move NAPI from EQ to CQ")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1723219138-29887-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/483e2fcf4beb0d9135d62e7d27b46fa2685479d4.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
as it doesn't seem to offer anything of value.
There's only 1 trivial user:
int lowpan_ndisc_is_useropt(u8 nd_opt_type) {
return nd_opt_type == ND_OPT_6CO;
}
but there's no harm to always treating that as
a useropt...
Cc: David Ahern <dsahern@kernel.org>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20240730003010.156977-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When user tries to disconnect a socket and there are more data written
into tcp write queue, we should tell users about this reset reason.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introducing this to show the users the reason of keepalive timeout.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introducing a new type TCP_STATE to handle some reset conditions
appearing in RFC 793 due to its socket state. Actually, we can look
into RFC 9293 which has no discrepancy about this part.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introducing a new type TCP_ABORT_ON_MEMORY for tcp reset reason to handle
out of memory case.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introducing a new type TCP_ABORT_ON_LINGER for tcp reset reason to handle
negative linger value case.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introducing a new type TCP_ABORT_ON_CLOSE for tcp reset reason to handle
the case where more data is unread in closing phase.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following helpers do not touch their 'struct net' argument.
- udp6_lib_lookup()
- __udp6_lib_lookup()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following helpers do not touch their struct net argument:
- bpf_sk_lookup_run_v6()
- __inet6_lookup_established()
- inet6_lookup_reuseport()
- inet6_lookup_listener()
- inet6_lookup_run_sk_lookup()
- __inet6_lookup()
- inet6_lookup()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following helpers do not touch their 'struct net' argument.
- udp_sk_bound_dev_eq()
- udp4_lib_lookup()
- __udp4_lib_lookup()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following helpers do not touch their struct net argument:
- bpf_sk_lookup_run_v4()
- inet_lookup_reuseport()
- inet_lhash2_lookup()
- inet_lookup_run_sk_lookup()
- __inet_lookup_listener()
- __inet_lookup_established()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_sk_bound_dev_eq() and its callers do not modify the net structure.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can allocate per-netns memory for struct pernet_operations by specifying
id and size.
register_pernet_operations() assigns an id to pernet_operations and later
ops_init() allocates the specified size of memory as net->gen->ptr[id].
If id is missing, no memory is allocated. If size is not specified,
pernet_operations just wastes an entry of net->gen->ptr[] for every netns.
net_generic is available only when both id and size are specified, so let's
ensure that.
While we are at it, we add const to both fields.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to '__reuseport_alloc()', annotate flexible array member
'sock' of 'struct sock_reuseport' with '__counted_by()' and use
convenient 'struct_size()' to simplify the math used in 'kzalloc()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240801142311.42837-1-dmantipov@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for ioctl(s) in AF_VSOCK.
The only ioctl available is SIOCOUTQ/TIOCOUTQ, which returns the number
of unsent bytes in the socket. This information is transport-specific
and is delegated to them using a callback.
Suggested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
draft-ietf-6man-pio-pflag is adding a new flag to the Prefix Information
Option to signal that the network can allocate a unique IPv6 prefix per
client via DHCPv6-PD (see draft-ietf-v6ops-dhcp-pd-per-device).
When ra_honor_pio_pflag is enabled, the presence of a P-flag causes
SLAAC autoconfiguration to be disabled for that particular PIO.
An automated test has been added in Android (r.android.com/3195335) to
go along with this change.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Lamparter <equinox@opensourcerouting.org>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Including fixes from netfilter.
Current release - new code bugs:
- eth: fbnic: fix s390 build.
- eth: airoha: fix NULL pointer dereference in airoha_qdma_cleanup_rx_queue()
Previous releases - regressions:
- flow_dissector: use DEBUG_NET_WARN_ON_ONCE
- ipv4: fix incorrect TOS in route get reply
- dsa: fix chip-wide frame size config in some drivers
Previous releases - always broken:
- netfilter: nf_set_pipapo: fix initial map fill
- eth: gve: fix XDP TX completion handling when counters overflow
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Q1xF
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Notably this includes fixes for a s390 build breakage.
Current release - new code bugs:
- eth: fbnic: fix s390 build
- eth: airoha: fix NULL pointer dereference in
airoha_qdma_cleanup_rx_queue()
Previous releases - regressions:
- flow_dissector: use DEBUG_NET_WARN_ON_ONCE
- ipv4: fix incorrect TOS in route get reply
- dsa: fix chip-wide frame size config in some drivers
Previous releases - always broken:
- netfilter: nf_set_pipapo: fix initial map fill
- eth: gve: fix XDP TX completion handling when counters overflow"
* tag 'net-6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
eth: fbnic: don't build the driver when skb has more than 21 frags
net: dsa: b53: Limit chip-wide jumbo frame config to CPU ports
net: dsa: mv88e6xxx: Limit chip-wide frame size config to CPU ports
net: airoha: Fix NULL pointer dereference in airoha_qdma_cleanup_rx_queue()
net: wwan: t7xx: add support for Dell DW5933e
ipv4: Fix incorrect TOS in fibmatch route get reply
ipv4: Fix incorrect TOS in route get reply
net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE
driver core: auxiliary bus: Fix documentation of auxiliary_device
net: airoha: fix error branch in airoha_dev_xmit and airoha_set_gdm_ports
gve: Fix XDP TX completion handling when counters overflow
ipvs: properly dereference pe in ip_vs_add_service
selftests: netfilter: add test case for recent mismatch bug
netfilter: nf_set_pipapo: fix initial map fill
netfilter: ctnetlink: use helper function to calculate expect ID
eth: fbnic: fix s390 build.
Usual collection of small improvements and fixes:
- Bug fixes and minor improvments in efa, irdma, mlx4, mlx5, rxe, hf1,
qib, ocrdma
- bnxt_re support for MSN, which is a new retransmit logic
- Initial mana support for RC qps
- Use after free bug and cleanups in iwcm
- Reduce resource usage in mlx5 when RDMA verbs features are not used
- New verb to drain shared recieve queues, similar to normal recieve
queues. This is necessary to allow ULPs a clean shutdown. Used in the
iscsi rdma target
- mlx5 support for more than 16 bits of doorbell indexes
- Doorbell moderation support for bnxt_re
- IB multi-plane support for mlx5
- New EFA adaptor PCI IDs
- RDMA_NAME_ASSIGN_TYPE_USER to hint to userspace that it shouldn't rename
the device
- A collection of hns bugs
- Fix long standing bug in bnxt_re with incorrect endian handling of
immediate data
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZpfvKQAKCRCFwuHvBreF
YXomAP46gZpGv5mlMOAXePRuKq6glNZWl3pVuwuycnlmjQcEUQD/dhQbJz0rZKBr
swuibPo83bFacfXJL7Wxd48m4G3EfgI=
=1eXu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes:
- Bug fixes and minor improvments in efa, irdma, mlx4, mlx5, rxe,
hf1, qib, ocrdma
- bnxt_re support for MSN, which is a new retransmit logic
- Initial mana support for RC qps
- Use after free bug and cleanups in iwcm
- Reduce resource usage in mlx5 when RDMA verbs features are not used
- New verb to drain shared recieve queues, similar to normal recieve
queues. This is necessary to allow ULPs a clean shutdown. Used in
the iscsi rdma target
- mlx5 support for more than 16 bits of doorbell indexes
- Doorbell moderation support for bnxt_re
- IB multi-plane support for mlx5
- New EFA adaptor PCI IDs
- RDMA_NAME_ASSIGN_TYPE_USER to hint to userspace that it shouldn't
rename the device
- A collection of hns bugs
- Fix long standing bug in bnxt_re with incorrect endian handling of
immediate data"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (65 commits)
IB/hfi1: Constify struct flag_table
RDMA/mana_ib: Set correct device into ib
bnxt_re: Fix imm_data endianness
RDMA: Fix netdev tracker in ib_device_set_netdev
RDMA/hns: Fix mbx timing out before CMD execution is completed
RDMA/hns: Fix insufficient extend DB for VFs.
RDMA/hns: Fix undifined behavior caused by invalid max_sge
RDMA/hns: Fix shift-out-bounds when max_inline_data is 0
RDMA/hns: Fix missing pagesize and alignment check in FRMR
RDMA/hns: Fix unmatch exception handling when init eq table fails
RDMA/hns: Fix soft lockup under heavy CEQE load
RDMA/hns: Check atomic wr length
RDMA/ocrdma: Don't inline statistics functions
RDMA/core: Introduce "name_assign_type" for an IB device
RDMA/qib: Fix truncation compilation warnings in qib_verbs.c
RDMA/qib: Fix truncation compilation warnings in qib_init.c
RDMA/efa: Add EFA 0xefa3 PCI ID
RDMA/mlx5: Support per-plane port IB counters by querying PPCNT register
net/mlx5: mlx5_ifc update for accessing ppcnt register of plane ports
RDMA/mlx5: Add plane index support when querying PTYS registers
...
The TOS value that is returned to user space in the route get reply is
the one with which the lookup was performed ('fl4->flowi4_tos'). This is
fine when the matched route is configured with a TOS as it would not
match if its TOS value did not match the one with which the lookup was
performed.
However, matching on TOS is only performed when the route's TOS is not
zero. It is therefore possible to have the kernel incorrectly return a
non-zero TOS:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get 192.0.2.2 tos 0xfc
192.0.2.2 tos 0x1c dev dummy1 src 192.0.2.1 uid 0
cache
Fix by adding a DSCP field to the FIB result structure (inside an
existing 4 bytes hole), populating it in the route lookup and using it
when filling the route get reply.
Output after the patch:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get 192.0.2.2 tos 0xfc
192.0.2.2 dev dummy1 src 192.0.2.1 uid 0
cache
Fixes: 1a00fee4ff ("ipv4: Remove rt_key_{src,dst,tos} from struct rtable.")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge in late fixes to prepare for the 6.11 net-next PR.
Conflicts:
93c3a96c30 ("net: pse-pd: Do not return EOPNOSUPP if config is null")
4cddb0f15e ("net: ethtool: pse-pd: Fix possible null-deref")
30d7b67277 ("net: ethtool: Add new power limit get and set features")
https://lore.kernel.org/20240715123204.623520bb@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that TCA_FLOWER_KEY_ENC_FLAGS is unused, as it's
former data is stored behind TCA_FLOWER_KEY_ENC_CONTROL,
then remove the last bits of FLOW_DISSECTOR_KEY_ENC_FLAGS.
FLOW_DISSECTOR_KEY_ENC_FLAGS is unreleased, and have been
in net-next since 2024-06-04.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-12-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define new TCA_FLOWER_KEY_FLAGS_* flags for use in struct
flow_dissector_key_control, covering the same flags as
currently exposed through TCA_FLOWER_KEY_ENC_FLAGS.
Put the new flags under FLOW_DIS_F_*. The idea is that we can
later, move the existing flags under FLOW_DIS_F_* as well.
The ynl flag names have been taken from the RFC iproute2 patch.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240713021911.1631517-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Redefine the flower control flags as an enum, so they are
included in BTF info.
Make the kernel-side enum a more explicit superset of
TCA_FLOWER_KEY_FLAGS_*, new flags still need to be added to
both enums, but at least the bit position only has to be
defined once.
FLOW_DIS_ENCAPSULATION is never set for mask, so it can't be
exposed to userspace in an unsupported flags mask error message,
so it will be placed one bit position above the last uAPI flag.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct llc_sap_state_trans' are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
339 456 24 819 333 net/llc/llc_s_st.o
After:
=====
text data bss dec hex filename
683 144 0 827 33b net/llc/llc_s_st.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/9d17587639195ee94b74ff06a11ef97d1833ee52.1720973710.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct llc_conn_state_trans' are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
13923 10896 32 24851 6113 net/llc/llc_c_st.o
After:
=====
text data bss dec hex filename
21859 3328 0 25187 6263 net/llc/llc_c_st.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/87cda89e4c9414e71d1a54bb1eb491b0e7f70375.1720973029.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- qca: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: Add BCM4388 support
- btintel: Add support for BlazarU core
- btintel: Add support for Whale Peak2
- btnxpuart: Add support for AW693 A1 chipset
- btnxpuart: Add support for IW615 chipset
- btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
-----BEGIN PGP SIGNATURE-----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=rQ2W
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- qca: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: Add BCM4388 support
- btintel: Add support for BlazarU core
- btintel: Add support for Whale Peak2
- btnxpuart: Add support for AW693 A1 chipset
- btnxpuart: Add support for IW615 chipset
- btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
* tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (71 commits)
Bluetooth: btmtk: Mark all stub functions as inline
Bluetooth: hci_qca: Fix build error
Bluetooth: hci_qca: use the power sequencer for wcn7850 and wcn6855
Bluetooth: hci_qca: make pwrseq calls the default if available
Bluetooth: hci_qca: unduplicate calls to hci_uart_register_device()
Bluetooth: hci_qca: schedule a devm action for disabling the clock
dt-bindings: bluetooth: qualcomm: describe the inputs from PMU for wcn7850
Bluetooth: btnxpuart: Fix warnings for suspend and resume functions
Bluetooth: btnxpuart: Add system suspend and resume handlers
Bluetooth: btnxpuart: Add support for IW615 chipset
Bluetooth: btnxpuart: Add support for AW693 A1 chipset
Bluetooth: btintel: Add support for Whale Peak2
Bluetooth: btintel: Add support for BlazarU core
Bluetooth: btusb: mediatek: add ISO data transmission functions
Bluetooth: btmtk: move btusb_recv_acl_mtk to btmtk.c
Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c
Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c
Bluetooth: btusb: add callback function in btusb suspend/resume
Bluetooth: btmtk: rename btmediatek_data
Bluetooth: btusb: mediatek: return error for failed reg access
...
====================
Link: https://patch.msgid.link/20240715142543.303944-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This removes the dependencies of hci_req_init and hci_request_cancel_all
from hci_sync.c.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This replaces the instance of hci_prepare_cmd with hci_cmd_sync_alloc
since the former is part of hci_request.c which is considered
deprecated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_request functions are considered deprecated so this replaces the
usage of hci_req_sync with hci_inquiry_sync.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove unused and set but otherwise unused 'discovery_old_state'
and 'sco_last_tx' members of 'struct hci_dev'. The first one is
a leftover after commit 182ee45da0 ("Bluetooth: hci_sync: Rework
hci_suspend_notifier"); the second one is originated from ancient
2.4.19 and I was unable to find any actual use since that.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit introduces a new tagger based on 802.1q tagging.
It's designed for the vsc73xx driver. The VSC73xx family doesn't have
any tag support for the RGMII port, but it could be based on VLANs.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240713211620.1125910-8-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 78db544b5d ("Bluetooth: hci_core: Remove le_restart_scan
work"), 'scan_start' and 'scan_duration' of 'struct discovery_state'
are still initialized but actually unused. So remove the aforementioned
fields and adjust 'hci_discovery_filter_clear()' and 'le_scan_disable()'
accordingly. Compile tested only.
Fixes: 78db544b5d ("Bluetooth: hci_core: Remove le_restart_scan work")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When HCI raw sockets are opened, the Bluetooth kernel module doesn't
track CIS/BIS connections. User-space applications have to identify
ISO data by maintaining connection information and look up the mapping
for each ACL data packet received. Besides, btsnoop log captured in
kernel couldn't tell ISO data from ACL data in this case.
To avoid additional lookups, this patch introduces vendor-specific
packet classification for Intel BT controllers to distinguish
ISO data packets from ACL data packets.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "dl" variable is a pointer to "struct rfcomm_dev_list_req" and
this structure ends in a flexible array:
struct rfcomm_dev_list_req {
[...]
struct rfcomm_dev_info dev_info[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + count * size" in
the kzalloc() and copy_to_user() functions.
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions).
In this case, it is important to note that the logic needs a little
refactoring to ensure that the "dev_num" member is initialized before
the first access to the flex array. Specifically, add the assignment
before the list_for_each_entry() loop.
Also remove the "size" variable as it is no longer needed.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "dl" variable is a pointer to "struct hci_dev_list_req" and this
structure ends in a flexible array:
struct hci_dev_list_req {
[...]
struct hci_dev_req dev_req[]; /* hci_dev_req structures */
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + count * size" in
the kzalloc() and copy_to_user() functions.
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions).
In this case, it is important to note that the logic needs a little
refactoring to ensure that the "dev_num" member is initialized before
the first access to the flex array. Specifically, add the assignment
before the list_for_each_entry() loop.
Also remove the "size" variable as it is no longer needed.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes MGMT_OP_LOAD_CONN_PARAM update existing connection by
dectecting the request is just for one connection, parameters already
exists and there is a connection.
Since this is a new behavior the revision is also updated to enable
userspace to detect it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=KyYL
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-07-13
1) Support sending NAT keepalives in ESP in UDP states.
Userspace IKE daemon had to do this before, but the
kernel can better keep track of it.
From Eyal Birger.
2) Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths. Currently, IPsec crypto offload is enabled for GRO
code path only. This patchset support UDP encapsulation for the non
GRO path. From Mike Yu.
* tag 'ipsec-next-2024-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Support crypto offload for outbound IPv4 UDP-encapsulated ESP packet
xfrm: Support crypto offload for inbound IPv4 UDP-encapsulated ESP packet
xfrm: Allow UDP encapsulation in crypto offload control path
xfrm: Support crypto offload for inbound IPv6 ESP packets not in GRO path
xfrm: support sending NAT keepalives in ESP in UDP states
====================
Link: https://patch.msgid.link/20240713102416.3272997-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, an address assigned to the output interface is selected when
the source address is not specified. This is problematic when a route,
configured in a vrf, uses an interface from another vrf (aka route leak).
The original vrf does not own the selected source address.
Let's add a check against the output interface and call the appropriate
function to select the source address.
CC: stable@vger.kernel.org
Fixes: 0d240e7811 ("net: vrf: Implement get_saddr for IPv6")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20240710081521.3809742-3-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xFmH
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-07-11
1) Fix esp_output_tail_tcp() on unsupported ESPINTCP.
From Hagar Hemdan.
2) Fix two bugs in the recently introduced SA direction separation.
From Antony Antony.
3) Fix unregister netdevice hang on hardware offload. We had to add another
list where skbs linked to that are unlinked from the lists (deleted)
but not yet freed.
4) Fix netdev reference count imbalance in xfrm_state_find.
From Jianbo Liu.
5) Call xfrm_dev_policy_delete when killingi them on offloaded policies.
Jianbo Liu.
* tag 'ipsec-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: call xfrm_dev_policy_delete when kill policy
xfrm: fix netdev reference count imbalance
xfrm: Export symbol xfrm_dev_state_delete.
xfrm: Fix unregister netdevice hang on hardware offload.
xfrm: Log input direction mismatch error in one place
xfrm: Fix input error path memory access
net: esp: cleanup esp_output_tail_tcp() in case of unsupported ESPINTCP
====================
Link: https://patch.msgid.link/20240711100025.1949454-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add mana_get_primary_netdev_rcu helper to get a primary
netdevice for a given port. When mana is used with
netvsc, the VF netdev is controlled by an upper netvsc
device. In a baremetal case, the VF netdev is the
primary device.
Use the mana_get_primary_netdev_rcu() helper in the mana_ib
to get the correct device for querying network states.
Fixes: 8b184e4f1c ("RDMA/mana_ib: Enable RoCE on port 1")
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1720705077-322-1-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Tony Nguyen says:
====================
idpf: XDP chapter I: convert Rx to libeth
Alexander Lobakin says:
XDP for idpf is currently 5 chapters:
* convert Rx to libeth (this);
* convert Tx and stats to libeth;
* generic XDP and XSk code changes, libeth_xdp;
* actual XDP for idpf via libeth_xdp;
* XSk for idpf (^).
Part I does the following:
* splits &idpf_queue into 4 (RQ, SQ, FQ, CQ) and puts them on a diet;
* ensures optimal cacheline placement, strictly asserts CL sizes;
* moves currently unused/dead singleq mode out of line;
* reuses libeth's Rx ptype definitions and helpers;
* uses libeth's Rx buffer management for both header and payload;
* eliminates memcpy()s and coherent DMA uses on hotpath, uses
napi_build_skb() instead of in-place short skb allocation.
Most idpf patches, except for the queue split, removes more lines
than adds.
Expect far better memory utilization and +5-8% on Rx depending on
the case (+17% on skb XDP_DROP :>).
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: use libeth Rx buffer management for payload buffer
idpf: convert header split mode to libeth + napi_build_skb()
libeth: support different types of buffers for Rx
idpf: remove legacy Page Pool Ethtool stats
idpf: reuse libeth's definitions of parsed ptype structures
idpf: compile singleq code only under default-n CONFIG_IDPF_SINGLEQ
idpf: merge singleq and splitq &net_device_ops
idpf: strictly assert cachelines of queue and queue vector structures
idpf: avoid bloating &idpf_q_vector with big %NR_CPUS
idpf: split &idpf_queue into 4 strictly-typed queue structures
idpf: stop using macros for accessing queue descriptors
libeth: add cacheline / struct layout assertion helpers
page_pool: use __cacheline_group_{begin, end}_aligned()
cache: add __cacheline_group_{begin, end}_aligned() (+ couple more)
====================
Link: https://patch.msgid.link/20240710203031.188081-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A typo makes PSAMPLE_ATTR_SAMPLE_RATE netlink flag be added to the wrong
sk_buff.
Fix the error and make the input sk_buff pointer "const" so that it
doesn't happen again.
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Fixes: 7b1b2b60c6 ("net: psample: allow using rate as probability")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20240710171004.2164034-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most likely the last "new features" pull request for v6.11 with
changes both in stack and in drivers. The big thing is the multiple
radios for wiphy feature which makes it possible to better advertise
radio capabilities to user space. mt76 enabled MLO and iwlwifi
re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support.
Major changes:
cfg80211/mac80211
* remove DEAUTH_NEED_MGD_TX_PREP flag
* multiple radios per wiphy support
mac80211_hwsim
* multi-radio wiphy support
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
iwlwifi
* mvm: re-enable Multi-Link Operation (MLO)
* aggregation (A-MSDU) optimisations
rtw89
* preparation for RTL8852BE-VT support
* WoWLAN support for WiFi 6 chips
* 36-bit PCI DMA support
mt76
* mt7925 Multi-Link Operation (MLO) support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmaPsBQRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt9EQf/Wevf/RnKyHhcuW4kmv0cxnjLW39K7CAh
ZlfN2JNTsVk4Na1EBjUgVyAWGdnGQpEhQlJYDExHcf5iD12pMVMIAQS8JXTDxuva
+ErAN1652p2N8nFCkNNuGbjYfO0D61xSIQj2uHhAlafK2k8FwnSn6XPP6jjHWvur
Acmw6W6l8eL+MP2K1VN2/2S09Gr6IQs7gXgWQX/6CaoK+OynFbUg8T9GQ2aqjr+d
lD17YB+oOHNCBxvg9LtBhKdfV14OBkKT6hW+YEqsrBEbx3N07ogDkPO0NUUPMXN3
IePEhj4XXrJ5UBMTvgWzNG9CwPeZFwuKGga+HZO9RKF5rwu42LsUMA==
=MpwE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
Most likely the last "new features" pull request for v6.11 with
changes both in stack and in drivers. The big thing is the multiple
radios for wiphy feature which makes it possible to better advertise
radio capabilities to user space. mt76 enabled MLO and iwlwifi
re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support.
Major changes:
cfg80211/mac80211
* remove DEAUTH_NEED_MGD_TX_PREP flag
* multiple radios per wiphy support
mac80211_hwsim
* multi-radio wiphy support
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
iwlwifi
* mvm: re-enable Multi-Link Operation (MLO)
* aggregation (A-MSDU) optimisations
rtw89
* preparation for RTL8852BE-VT support
* WoWLAN support for WiFi 6 chips
* 36-bit PCI DMA support
mt76
* mt7925 Multi-Link Operation (MLO) support
* tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (204 commits)
wifi: mac80211: fix AP chandef capturing in CSA
wifi: iwlwifi: correctly reference TSO page information
wifi: mt76: mt792x: fix scheduler interference in drv own process
wifi: mt76: mt7925: enabling MLO when the firmware supports it
wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_info
wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLO
wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLO
wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLO
wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctx
wifi: mt76: add def_wcid to struct mt76_wcid
wifi: mt76: mt7925: report link information in rx status
wifi: mt76: mt7925: update rate index according to link id
wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change
...
====================
Link: https://patch.msgid.link/20240711102353.0C849C116B1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b0 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unlike previous generations, idpf requires more buffer types for optimal
performance. This includes: header buffers, short buffers, and
no-overhead buffers (w/o headroom and tailroom, for TCP zerocopy when
the header split is enabled).
Introduce libeth Rx buffer type and calculate page_pool params
accordingly. All the HW-related details like buffer alignment are still
accounted. For the header buffers, pick 256 bytes as in most places in
the kernel (have you ever seen frames with bigger headers?).
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add helpers to assert struct field layout, a bit more crazy and
networking-specific than in <linux/cache.h>. They assume you have
3 CL-aligned groups (read-mostly, read-write, cold) in a struct
you want to assert, and nothing besides them.
For 64-bit with 64-byte cachelines, the assertions are as strict
as possible, as the size can then be easily predicted.
For the rest, make sure they don't cross the specified bound.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Instead of doing __cacheline_group_begin() __aligned(), use the new
__cacheline_group_{begin,end}_aligned(), so that it will take care
of the group alignment itself.
Also replace open-coded `4 * sizeof(long)` in two places with
a definition.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZoxN0AAKCRDbK58LschI
g0c5AQDa3ZV9gfbN42y1zSDoM1uOgO60fb+ydxyOYh8l3+OiQQD/fLfpTY3gBFSY
9yi/pZhw/QdNzQskHNIBrHFGtJbMxgs=
=p1Zz
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-08
The following pull-request contains BPF updates for your *net-next* tree.
We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).
The main changes are:
1) Support resilient split BTF which cuts down on duplication and makes BTF
as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.
2) Add support for dumping kfunc prototypes from BTF which enables both detecting
as well as dumping compilable prototypes for kfuncs, from Daniel Xu.
3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
support for BPF exceptions, from Ilya Leoshkevich.
4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.
5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
for skbs and add coverage along with it, from Vadim Fedorenko.
6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.
7) Extend the BPF verifier to track the delta between linked registers in order
to better deal with recent LLVM code optimizations, from Alexei Starovoitov.
8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
have been a pointer to the map value, from Benjamin Tissoires.
9) Extend BPF selftests to add regular expression support for test output matching
and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.
10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
iterates exactly once anyway, from Dan Carpenter.
11) Add the capability to offload the netfilter flowtable in XDP layer through
kfuncs, from Florian Westphal & Lorenzo Bianconi.
12) Various cleanups in networking helpers in BPF selftests to shave off a few
lines of open-coded functions on client/server handling, from Geliang Tang.
13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
that x86 JIT does not need to implement detection, from Leon Hwang.
14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
out-of-bounds memory access for dynpointers, from Matt Bobrowski.
15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
it might lead to problems on 32-bit archs, from Jiri Olsa.
16) Enhance traffic validation and dynamic batch size support in xsk selftests,
from Tushar Vyavahare.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
bpf: helpers: fix bpf_wq_set_callback_impl signature
libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
selftests/bpf: Remove exceptions tests from DENYLIST.s390x
s390/bpf: Implement exceptions
s390/bpf: Change seen_reg to a mask
bpf: Remove unnecessary loop in task_file_seq_get_next()
riscv, bpf: Optimize stack usage of trampoline
bpf, devmap: Add .map_alloc_check
selftests/bpf: Remove arena tests from DENYLIST.s390x
selftests/bpf: Add UAF tests for arena atomics
selftests/bpf: Introduce __arena_global
s390/bpf: Support arena atomics
s390/bpf: Enable arena
s390/bpf: Support address space cast instruction
s390/bpf: Support BPF_PROBE_MEM32
s390/bpf: Land on the next JITed instruction after exception
s390/bpf: Introduce pre- and post- probe functions
s390/bpf: Get rid of get_probe_mem_regno()
...
====================
Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix typos s/steam/stream/ and spell out Schedule/Unschedule in the
comments.
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240704202558.62704-2-thorsten.blum@toblux.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The prerequisite for MLO support in cfg80211/mac80211 is that all the links
participating in MLO must be from the same wiphy/ieee80211_hw. To meet this
expectation, some drivers may need to group multiple discrete hardware each
acting as a link in MLO under single wiphy.
With this change, supported frequencies and interface combinations of each
individual radio are reported to user space. This allows user space to figure
out the limitations of what combination of channels can be used concurrently.
Even for non-MLO devices, this improves support for devices capable of
running on multiple channels at the same time.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/18a88f9ce82b1c9f7c12f1672430eaf2bb0be295.1720514221.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported
an issue that the tcx_entry can be released too early leading to a use
after free (UAF) when an active old-style ingress or clsact qdisc with a
shared tc block is later replaced by another ingress or clsact instance.
Essentially, the sequence to trigger the UAF (one example) can be as follows:
1. A network namespace is created
2. An ingress qdisc is created. This allocates a tcx_entry, and
&tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the
same time, a tcf block with index 1 is created.
3. chain0 is attached to the tcf block. chain0 must be connected to
the block linked to the ingress qdisc to later reach the function
tcf_chain0_head_change_cb_del() which triggers the UAF.
4. Create and graft a clsact qdisc. This causes the ingress qdisc
created in step 1 to be removed, thus freeing the previously linked
tcx_entry:
rtnetlink_rcv_msg()
=> tc_modify_qdisc()
=> qdisc_create()
=> clsact_init() [a]
=> qdisc_graft()
=> qdisc_destroy()
=> __qdisc_destroy()
=> ingress_destroy() [b]
=> tcx_entry_free()
=> kfree_rcu() // tcx_entry freed
5. Finally, the network namespace is closed. This registers the
cleanup_net worker, and during the process of releasing the
remaining clsact qdisc, it accesses the tcx_entry that was
already freed in step 4, causing the UAF to occur:
cleanup_net()
=> ops_exit_list()
=> default_device_exit_batch()
=> unregister_netdevice_many()
=> unregister_netdevice_many_notify()
=> dev_shutdown()
=> qdisc_put()
=> clsact_destroy() [c]
=> tcf_block_put_ext()
=> tcf_chain0_head_change_cb_del()
=> tcf_chain_head_change_item()
=> clsact_chain_head_change()
=> mini_qdisc_pair_swap() // UAF
There are also other variants, the gist is to add an ingress (or clsact)
qdisc with a specific shared block, then to replace that qdisc, waiting
for the tcx_entry kfree_rcu() to be executed and subsequently accessing
the current active qdisc's miniq one way or another.
The correct fix is to turn the miniq_active boolean into a counter. What
can be observed, at step 2 above, the counter transitions from 0->1, at
step [a] from 1->2 (in order for the miniq object to remain active during
the replacement), then in [b] from 2->1 and finally [c] 1->0 with the
eventual release. The reference counter in general ranges from [0,2] and
it does not need to be atomic since all access to the counter is protected
by the rtnl mutex. With this in place, there is no longer a UAF happening
and the tcx_entry is freed at the correct time.
Fixes: e420bed025 ("bpf: Add fd-based tcx multi-prog infra with link support")
Reported-by: Pedro Pinto <xten@osec.io>
Co-developed-by: Pedro Pinto <xten@osec.io>
Signed-off-by: Pedro Pinto <xten@osec.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hyunwoo Kim <v4bel@theori.io>
Cc: Wongi Lee <qwerty@theori.io>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240708133130.11609-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Although not explicitly documented in the psample module itself, the
definition of PSAMPLE_ATTR_SAMPLE_RATE seems inherited from act_sample.
Quoting tc-sample(8):
"RATE of 100 will lead to an average of one sampled packet out of every
100 observed."
With this semantics, the rates that we can express with an unsigned
32-bits number are very unevenly distributed and concentrated towards
"sampling few packets".
For example, we can express a probability of 2.32E-8% but we
cannot express anything between 100% and 50%.
For sampling applications that are capable of sampling a decent
amount of packets, this sampling rate semantics is not very useful.
Add a new flag to the uAPI that indicates that the sampling rate is
expressed in scaled probability, this is:
- 0 is 0% probability, no packets get sampled.
- U32_MAX is 100% probability, all packets get sampled.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-5-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a user cookie to the sample metadata so that sample emitters can
provide more contextual information to samples.
If present, send the user cookie in a new attribute:
PSAMPLE_ATTR_USER_COOKIE.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-2-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hopefully the last fixes for v6.10. Fix a regression in wilc1000 where
bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmaGg5gRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtLbQf/XjGiuuYQ/8i9gDGpKmR3T6lXTXoB5eHw
AiC+WN8Hi0cko4oekVI9xGqCPoMwz3IwhdgO+Rmd0EoiAV3REFsxyRYaZ8z9T6tf
cb58jdAY9X+nVzHnGosTibs31K80d5PqcuRNr4jsws5Fuu/f6OhLoiCDaRlLb+aR
YFmts2Z3gA6pNzK6gFMzGURpfSSQ0ZsJk/myAAWw+63KHKbUB8+GcSBqd+EsJe6O
AHXbhim1W5IOD7JdIq7zV9lwZaNH646oQG4nwZr20IWonaQf/d1EiqE4tcqKtoMw
qR2qW4mcNm80JXhOojXgKPdykQXe4DSo0FCnGyGGLtn59jlRrPM+uw==
=mgXX
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Link: https://patch.msgid.link/20240704111431.11DEDC3277B@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Abstract the memory type from the page_pool so we can later add support
for new memory types. Convert the page_pool to use the new netmem type
abstraction, rather than use struct page directly.
As of this patch the netmem type is a no-op abstraction: it's always a
struct page underneath. All the page pool internals are converted to
use struct netmem instead of struct page, and the page pool now exports
2 APIs:
1. The existing struct page API.
2. The new struct netmem API.
Keeping the existing API is transitional; we do not want to refactor all
the current drivers using the page pool at once.
The netmem abstraction is currently a no-op. The page_pool uses
page_to_netmem() to convert allocated pages to netmem, and uses
netmem_to_page() to convert the netmem back to pages to pass to mm APIs,
Follow up patches to this series add non-paged netmem support to the
page_pool. This change is factored out on its own to limit the code
churn to this 1 patch, for ease of code review.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20240628003253.1694510-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Every NIC driver utilizing XDP should invoke xdp_do_flush() after
processing all packages. With the introduction of the bpf_net_context
logic the flush lists (for dev, CPU-map and xsk) are lazy initialized
only if used. However xdp_do_flush() tries to flush all three of them so
all three lists are always initialized and the likely empty lists are
"iterated".
Without the usage of XDP but with CONFIG_DEBUG_NET the lists are also
initialized due to xdp_do_check_flushed().
Jakub suggest to utilize the hints in bpf_net_context and avoid invoking
the flush function. This will also avoiding initializing the lists which
are otherwise unused.
Introduce bpf_net_ctx_get_all_used_flush_lists() to return the
individual list if not-empty. Use the logic in xdp_do_flush() and
xdp_do_check_flushed(). Remove the not needed .*_check_flush().
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
56ef27e3 unexported page_pool_unlink_napi() and renamed it to
page_pool_disable_direct_recycling(). This is because there was no
in-tree user of page_pool_unlink_napi().
Since then Rx queue API and an implementation in bnxt got merged. In the
bnxt implementation, it broadly follows the following steps: allocate
new queue memory + page pool, stop old rx queue, swap, then destroy old
queue memory + page pool.
The existing NAPI instance is re-used so when the old page pool that is
no longer used but still linked to this shared NAPI instance is
destroyed, it will trigger warnings.
In my initial patches I unlinked a page pool from a NAPI instance
directly. Instead, export page_pool_disable_direct_recycling() and call
that instead to avoid having a driver touch a core struct.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce bpf_xdp_flow_lookup kfunc in order to perform the lookup
of a given flowtable entry based on a fib tuple of incoming traffic.
bpf_xdp_flow_lookup can be used as building block to offload in xdp
the processing of sw flowtable when hw flowtable is not available.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/bpf/55d38a4e5856f6d1509d823ff4e98aaa6d356097.1719698275.git.lorenzo@kernel.org
This adds a small internal mapping table so that a new bpf (xdp) kfunc
can perform lookups in a flowtable.
As-is, xdp program has access to the device pointer, but no way to do a
lookup in a flowtable -- there is no way to obtain the needed struct
without questionable stunts.
This allows to obtain an nf_flowtable pointer given a net_device
structure.
In order to keep backward compatibility, the infrastructure allows the
user to add a given device to multiple flowtables, but it will always
return the first added mapping performing the lookup since it assumes
the right configuration is 1:1 mapping between flowtables and net_devices.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/bpf/9f20e2c36f494b3bf177328718367f636bb0b2ab.1719698275.git.lorenzo@kernel.org
-----BEGIN PGP SIGNATURE-----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=0BtN
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next into main
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
Patch #1 to #11 to shrink memory consumption for transaction objects:
struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */
struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
Series from Florian Westphal. For the record, I have mangled patch #1
to add nft_trans_container_*() and use if for every transaction object.
I have also added BUILD_BUG_ON to ensure struct nft_trans always comes
at the beginning of the container transaction object. And few minor
cleanups, any new bugs are of my own.
Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno.
Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang.
Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting
default conntrack timeouts via nfnetlink_cttimeout API, from
Lin Ma.
Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use
larger secctx names than the existing 256 bytes length.
Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving
nfnetlink_queue, from Florian Westphal.
Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the following deadlock introduced by 39a92a55be13
("bluetooth/l2cap: sync sock recv cb and release")
============================================
WARNING: possible recursive locking detected
6.10.0-rc3-g4029dba6b6f1 #6823 Not tainted
--------------------------------------------
kworker/u5:0/35 is trying to acquire lock:
ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at:
l2cap_sock_recv_cb+0x44/0x1e0
but task is already holding lock:
ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at:
l2cap_get_chan_by_scid+0xaf/0xd0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&chan->lock#2/1);
lock(&chan->lock#2/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kworker/u5:0/35:
#0: ffff888002b8a940 ((wq_completion)hci0#2){+.+.}-{0:0}, at:
process_one_work+0x750/0x930
#1: ffff888002c67dd0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0},
at: process_one_work+0x44e/0x930
#2: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at:
l2cap_get_chan_by_scid+0xaf/0xd0
To fix the original problem this introduces l2cap_chan_lock at
l2cap_conless_channel to ensure that l2cap_sock_recv_cb is called with
chan->lock held.
Fixes: 89e856e124 ("bluetooth/l2cap: sync sock recv cb and release")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some Broadcom controllers found on Apple Silicon machines abuse the
reserved bits inside the PHY fields of LE Extended Advertising Report
events for additional flags. Add a quirk to drop these and correctly
extract the Primary/Secondary_PHY field.
The following excerpt from a btmon trace shows a report received with
"Reserved" for "Primary PHY" on a 4388 controller:
> HCI Event: LE Meta Event (0x3e) plen 26
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x2515
Props: 0x0015
Connectable
Directed
Use legacy advertising PDUs
Data status: Complete
Reserved (0x2500)
Legacy PDU Type: Reserved (0x2515)
Address type: Random (0x01)
Address: 00:00:00:00:00:00 (Static)
Primary PHY: Reserved
Secondary PHY: No packets
SID: no ADI field (0xff)
TX power: 127 dBm
RSSI: -60 dBm (0xc4)
Periodic advertising interval: 0.00 msec (0x0000)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (Apple, Inc.)
Data length: 0x00
Cc: stable@vger.kernel.org
Fixes: 2e7ed5f5e6 ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync")
Reported-by: Janne Grunau <j@jannau.net>
Closes: https://lore.kernel.org/all/Zjz0atzRhFykROM9@robin
Tested-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix the definition of BSS_CHANGED_UNSOL_BCAST_PROBE_RESP so that
not all higher bits get set, 1<<31 is a signed variable, so when
we do
u64 changed = BSS_CHANGED_UNSOL_BCAST_PROBE_RESP;
we get sign expansion, so the value is 0xffff'ffff'8000'0000 and
that's clearly not desired. Use BIT_ULL() to make it unsigned as
well as the right type for the change flags.
Fixes: 178e9d6adc ("wifi: mac80211: fix unsolicited broadcast probe config")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240627104257.06174d291db2.Iba0d642916eb78a61f8ab2cc5ca9280783d9c1db@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This flag is annoying because it puts a lot of logic into mac80211
that could just as well be in the driver (only iwlmvm uses it) and
the implementation is also broken for MLO.
Remove the flag in favour of calling drv_mgd_prepare_tx() without
any conditions even for the deauth-while-assoc case. The drivers
that implement it can take the appropriate actions, which for the
only user of DEAUTH_NEED_MGD_TX_PREP (iwlmvm) is a bit more tricky
than the implementation in mac80211 is anyway, and all others have
no need and can just exit if info->was_assoc is set.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240627132527.94924bcc9c9e.I328a219e45f2e2724cd52e75bb9feee3bf21a463@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=eoyB
-----END PGP SIGNATURE-----
Merge tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains two Netfilter fixes for net:
Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR
to move the sysctl toggle to enable SRv6 netfilter hooks from
nf_conntrack to the core, from Jianguo Wu.
Patch #2 fixes a possible pointer leak to userspace due to insufficient
validation of NFT_DATA_VALUE.
Linus found this pointer leak to userspace via zdi-disclosures@ and
forwarded the notice to Netfilter maintainers, he appears as reporter
because whoever found this issue never approached Netfilter
maintainers neither via security@ nor in private.
netfilter pull request 24-06-27
* tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n
====================
Link: https://patch.msgid.link/20240626233845.151197-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.
Fixes: 96518518cc ("netfilter: add nftables")
Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add the ability to send out RFC-3948 NAT keepalives from the xfrm stack.
To use, Userspace sets an XFRM_NAT_KEEPALIVE_INTERVAL integer property when
creating XFRM outbound states which denotes the number of seconds between
keepalive messages.
Keepalive messages are sent from a per net delayed work which iterates over
the xfrm states. The logic is guarded by the xfrm state spinlock due to the
xfrm state walk iterator.
Possible future enhancements:
- Adding counters to keep track of sent keepalives.
- deduplicate NAT keepalives between states sharing the same nat keepalive
parameters.
- provisioning hardware offloads for devices capable of implementing this.
- revise xfrm state list to use an rcu list in order to avoid running this
under spinlock.
Suggested-by: Paul Wouters <paul.wouters@aiven.io>
Tested-by: Paul Wouters <paul.wouters@aiven.io>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
nft_ctx is huge and most of the information stored within isn't used
at all.
Remove nft_ctx member from the base transaction structure and store
only what is needed.
After this change, relevant struct sizes are:
struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */
struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
A further reduction by 8 bytes would even allow for kmalloc-64.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently the chain can be derived from trans->ctx.chain, but
the ctx will go away soon.
Thus add the chain pointer to nft_trans_rule structure itself.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It would be better to not store nft_ctx inside nft_trans object,
the netlink ctx strucutre is huge and most of its information is
never needed in places that use trans->ctx.
Avoid/reduce its usage if possible, no runtime behaviour change
intended.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only nft_trans_chain and nft_trans_set subtypes use the
trans->binding_list member.
Add a new common binding subtype and move the member there.
This reduces size of all other subtypes by 16 bytes on 64bit platforms.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There is 'struct nft_trans', the basic structure for all transactional
objects, and the the various different transactional objects, such as
nft_trans_table, chain, set, set_elem and so on.
Right now 'struct nft_trans' uses a flexible member at the tail
(data[]), and casting is needed to access the actual type-specific
members.
Change this to make the hierarchy visible in source code, i.e. make
struct nft_trans the first member of all derived subtypes.
This has several advantages:
1. pahole output reflects the real size needed by the particular subtype
2. allows to use container_of() to convert the base type to the actual
object type instead of casting ->data to the overlay structure.
3. It makes it easy to add intermediate types.
'struct nft_trans' contains a 'binding_list' that is only needed
by two subtypes, so it should be part of the two subtypes, not in
the base structure.
But that makes it hard to interate over the binding_list, because
there is no common base structure.
A follow patch moves the bind list to a new struct:
struct nft_trans_binding {
struct nft_trans nft_trans;
struct list_head binding_list;
};
... and makes that structure the new 'first member' for both
nft_trans_chain and nft_trans_set.
No functional change intended in this patch.
Some numbers:
struct nft_trans { /* size: 88, cachelines: 2, members: 5 */
struct nft_trans_chain { /* size: 152, cachelines: 3, members: 10 */
struct nft_trans_elem { /* size: 112, cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 128, cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 112, cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 112, cachelines: 2, members: 5 */
struct nft_trans_set { /* size: 120, cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 96, cachelines: 2, members: 2 */
Of particular interest is nft_trans_elem, which needs to be allocated
once for each pending (to be added or removed) set element.
Add BUILD_BUG_ON to check struct nft_trans is placed at the top of
the container structure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When bonding is configured in BOND_MODE_BROADCAST mode, if two identical
SYN packets are received at the same time and processed on different CPUs,
it can potentially create the same sk (sock) but two different reqsk
(request_sock) in tcp_conn_request().
These two different reqsk will respond with two SYNACK packets, and since
the generation of the seq (ISN) incorporates a timestamp, the final two
SYNACK packets will have different seq values.
The consequence is that when the Client receives and replies with an ACK
to the earlier SYNACK packet, we will reset(RST) it.
========================================================================
This behavior is consistently reproducible in my local setup,
which comprises:
| NETA1 ------ NETB1 |
PC_A --- bond --- | | --- bond --- PC_B
| NETA2 ------ NETB2 |
- PC_A is the Server and has two network cards, NETA1 and NETA2. I have
bonded these two cards using BOND_MODE_BROADCAST mode and configured
them to be handled by different CPU.
- PC_B is the Client, also equipped with two network cards, NETB1 and
NETB2, which are also bonded and configured in BOND_MODE_BROADCAST mode.
If the client attempts a TCP connection to the server, it might encounter
a failure. Capturing packets from the server side reveals:
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855116,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855123, <==
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117, <==
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117,
Two SYNACKs with different seq numbers are sent by localhost,
resulting in an anomaly.
========================================================================
The attempted solution is as follows:
Add a return value to inet_csk_reqsk_queue_hash_add() to confirm if the
ehash insertion is successful (Up to now, the reason for unsuccessful
insertion is that a reqsk for the same connection has already been
inserted). If the insertion fails, release the reqsk.
Due to the refcnt, Kuniyuki suggests also adding a return value check
for the DCCP module; if ehash insertion fails, indicating a successful
insertion of the same connection, simply release the reqsk as well.
Simultaneously, In the reqsk_queue_hash_req(), the start of the
req->rsk_timer is adjusted to be after successful insertion.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: luoxuanqiang <luoxuanqiang@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240621013929.1386815-1-luoxuanqiang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 1971d13ffa ("af_unix: Suppress false-positive lockdep splat for
spin_lock() in __unix_gc().") added U_LOCK_GC_LISTENER for the old GC,
but it's no longer needed for the new GC.
Let's remove U_LOCK_GC_LISTENER and unix_state_lock_nested() as there's
no user.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sk_diag_dump_icons() acquires embryo's lock by unix_state_lock_nested()
to fetch its peer.
The embryo's ->peer is set to NULL only when its parent listener is
close()d. Then, unix_release_sock() is called for each embryo after
unlinking skb by skb_dequeue().
In sk_diag_dump_icons(), we hold the parent's recvq lock, so we need
not acquire unix_state_lock_nested(), and peer is always non-NULL.
Let's remove unnecessary unix_state_lock_nested() and non-NULL test
for peer.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While a SOCK_(STREAM|SEQPACKET) socket connect()s to another, we hold
two locks of them by unix_state_lock() and unix_state_lock_nested() in
unix_stream_connect().
Before unix_state_lock_nested(), the following is guaranteed by checking
sk->sk_state:
1. The first socket is TCP_LISTEN
2. The second socket is not the first one
3. Simultaneous connect() must fail
So, the client state can be TCP_CLOSE or TCP_LISTEN or TCP_ESTABLISHED.
Let's define the expected states as unix_state_lock_cmp_fn() instead of
using unix_state_lock_nested().
Note that 2. is detected by debug_spin_lock_before() and 3. cannot be
expressed as lock_cmp_fn.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When offloading xfrm states to hardware, the offloading
device is attached to the skbs secpath. If a skb is free
is deferred, an unregister netdevice hangs because the
netdevice is still refcounted.
Fix this by removing the netdevice from the xfrm states
when the netdevice is unregistered. To find all xfrm states
that need to be cleared we add another list where skbs
linked to that are unlinked from the lists (deleted)
but not yet freed.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The access to seg6_bpf_srh_states is protected by disabling preemption.
Based on the code, the entry point is input_action_end_bpf() and
every other function (the bpf helper functions bpf_lwt_seg6_*()), that
is accessing seg6_bpf_srh_states, should be called from within
input_action_end_bpf().
input_action_end_bpf() accesses seg6_bpf_srh_states first at the top of
the function and then disables preemption. This looks wrong because if
preemption needs to be disabled as part of the locking mechanism then
the variable shouldn't be accessed beforehand.
Looking at how it is used via test_lwt_seg6local.sh then
input_action_end_bpf() is always invoked from softirq context. If this
is always the case then the preempt_disable() statement is superfluous.
If this is not always invoked from softirq then disabling only
preemption is not sufficient.
Replace the preempt_disable() statement with nested-BH locking. This is
not an equivalent replacement as it assumes that the invocation of
input_action_end_bpf() always occurs in softirq context and thus the
preempt_disable() is superfluous.
Add a local_lock_t the data structure and use local_lock_nested_bh() for
locking. Add lockdep_assert_held() to ensure the lock is held while the
per-CPU variable is referenced in the helper functions.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-13-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv4_tcp_sk is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Make a struct with a sock member (original ipv4_tcp_sk) and a
local_lock_t and use local_lock_nested_bh() for locking. This change
adds only lockdep coverage and does not alter the functional behaviour
for !PREEMPT_RT.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-7-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the sysctl net.netfilter.nf_hooks_lwtunnel depends on the
nf_conntrack module, but the nf_conntrack module is not always loaded.
Therefore, accessing net.netfilter.nf_hooks_lwtunnel may have an error.
Move sysctl nf_hooks_lwtunnel into the netfilter core.
Fixes: 7a3f5b0de3 ("netfilter: add netfilter hooks to SRv6 data plane")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As defined by the MANA Hardware spec, the queue size for DMA is 4KB
minimal, and power of 2. And, the HWC queue size has to be exactly
4KB.
To support page sizes other than 4KB on ARM64, define the minimal
queue size as a macro separately from the PAGE_SIZE, which we always
assumed it to be 4KB before supporting ARM64.
Also, add MANA specific macros and update code related to size
alignment, DMA region calculations, etc.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1718655446-6576-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds two new helper functions:
flow_rule_is_supp_enc_control_flags()
flow_rule_has_enc_control_flags()
They are intended to be used for validating encapsulation control
flags, and compliment the similar helpers without "enc_" in the name.
The only difference is that they have their own error message,
to make it obvious if an unsupported flag error is related to
FLOW_DISSECTOR_KEY_CONTROL or FLOW_DISSECTOR_KEY_ENC_CONTROL.
flow_rule_has_enc_control_flags() is for drivers supporting
FLOW_DISSECTOR_KEY_ENC_CONTROL, but not supporting any
encapsulation control flags.
(Currently all 4 drivers fits this category)
flow_rule_is_supp_enc_control_flags() is currently only used
for the above helper, but should also be used by drivers once
they implement at least one encapsulation control flag.
There is AFAICT currently no need for an "enc_" variant of
flow_rule_match_has_control_flags(), as all drivers currently
supporting FLOW_DISSECTOR_KEY_ENC_CONTROL, are already calling
flow_rule_match_enc_control() directly.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/20240609173358.193178-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When calculating hashes for the purpose of multipath forwarding, both IPv4
and IPv6 code currently fall back on flow_hash_from_keys(). That uses a
randomly-generated seed. That's a fine choice by default, but unfortunately
some deployments may need a tighter control over the seed used.
In this patch, make the seed configurable by adding a new sysctl key,
net.ipv4.fib_multipath_hash_seed to control the seed. This seed is used
specifically for multipath forwarding and not for the other concerns that
flow_hash_from_keys() is used for, such as queue selection. Expose the knob
as sysctl because other such settings, such as headers to hash, are also
handled that way. Like those, the multipath hash seed is a per-netns
variable.
Despite being placed in the net.ipv4 namespace, the multipath seed sysctl
is used for both IPv4 and IPv6, similarly to e.g. a number of TCP
variables.
The seed used by flow_hash_from_keys() is a 128-bit quantity. However it
seems that usually the seed is a much more modest value. 32 bits seem
typical (Cisco, Cumulus), some systems go even lower. For that reason, and
to decouple the user interface from implementation details, go with a
32-bit quantity, which is then quadruplicated to form the siphash key.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607151357.421181-3-petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following patches will add a sysctl to control multipath hash
seed. In order to centralize the hash computation, add a helper,
fib_multipath_hash_from_keys(), and have all IPv4 and IPv6 route.c
invocations of flow_hash_from_keys() go through this helper instead.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607151357.421181-2-petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow variable size indirection table allocation in MANA instead
of using a constant value MANA_INDIRECT_TABLE_SIZE.
The size is now derived from the MANA_QUERY_VPORT_CONFIG and the
indirection table is allocated dynamically.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/1718015319-9609-1-git-send-email-shradhagupta@linux.microsoft.com
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add a regulatory flag to allow VLP AP operation even on
channels otherwise marked NO_IR, which may be possible
in some regulatory domains/countries.
Note that this requires checking also when the beacon is
changed, since that may change the regulatory power type.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.63792ce19790.Ie2a02750d283b78fbf3c686b10565fb0388889e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are two functions exported now, with different settings,
refactor to just export a single function that take a struct
with different settings. This will make it easier to add more
parameters.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.d44c34dadfc2.I59b4403108e0dbf7fc6ae8f7522e1af520cffb1c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This really shouldn't have been in ieee80211.h, since it
doesn't directly represent the spec. Move it to cfg80211
rather than mac80211 since upcoming changes will use it
there.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.962b16c831cd.I5745962525b1b176c5b90d37b3720fc100eee406@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use BIT(x) instead of 1<<x, in part because it's mostly
missing spaces anyway, in part because it reads nicer.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.c21598fbf49c.Ib8f26c5e9f508aee19fdfa1fd4b5995f084c46d4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now there are tracepoints, that cover all functionality of
tcp_hash_fail(), but also wire up missing places
They are also faster, can be disabled and provide filtering.
This potentially may create a regression if a userspace depends on dmesg
logs. Fingers crossed, let's see if anyone complains in reality.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two reasons:
1. It's grown up enough
2. In order to not do header spaghetti by including
<trace/events/tcp.h>, which is necessary for TCP tracepoints.
While at it, unexport and make static tcp_inbound_ao_hash().
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's going to be used more in TCP-AO tracepoints.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's possible to clean-up some ifdefs by hiding that
tcp_{md5,ao}_needed static branch is defined and compiled only
under related configs, since commit 4c8530dc7d ("net/tcp: Only produce
AO/MD5 logs if there are any keys").
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have two
conflicts this time:
CONFLICT (content): Merge conflict in net/mac80211/cfg.c
CONFLICT (content): Merge conflict in drivers/net/wireless/microchip/wilc1000/netdev.c
Here are Stephen's resolutions for them:
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au/https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au/
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* Enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmZi07URHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu3/QgAo7jyKgvpwMaNIVRLyfYCo0r3Q9wb7QPd
QeRNsftYxlWpPTJ4+Y95aZupy91Ay+RaEQXbbtl7PMIiyQrs7wb4V4Iqzedkws3t
DZsR5BitH+1BIGY0Omo0fiSB5HlWEwZGUj6inqlgKHpBtdIVTANSMjuwkdoMAV5y
ZU57axIGToySvDbRlhJQW833Nnh4KnaseA+TtyfXSaBVerzbshkjBr0d9pMBMiH9
irMQW5CW+7fbxp3OCNsKxX4eG6MFGmm/uP1hFmeYQi2qzUE4SddHMeV4I6oNKOrH
vFB+ZVmYvOjJUYsNhlCUe6Vy+EKwvmfiDWwE1egelEkgozCixJXAAQ==
=QT4C
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This removes the bogus check for max > hcon->le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.
In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:
TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout
Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When innerprotoinherit is set, the tunneled packets do not have an inner
Ethernet header.
Change 'maclen' to not always assume the header length is ETH_HLEN, as
there might not be a MAC header.
This resolves issues with drivers (e.g. mlx5, in
mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset
to be correct, and use it for TX offloads.
Fixes: d8a6213d70 ("geneve: fix header validation in geneve[6]_xmit_skb")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Its no longer used outside inet_timewait_sock.c, so move it there.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TCP timewait timer is proving to be problematic for setups where
scheduler CPU isolation is achieved at runtime via cpusets (as opposed to
statically via isolcpus=domains).
What happens there is a CPU goes through tcp_time_wait(), arming the
time_wait timer, then gets isolated. TCP_TIMEWAIT_LEN later, the timer
fires, causing interference for the now-isolated CPU. This is conceptually
similar to the issue described in commit e02b931248 ("workqueue: Unbind
kworkers before sending them to exit()")
Move inet_twsk_schedule() to within inet_twsk_hashdance(), with the ehash
lock held. Expand the lock's critical section from inet_twsk_kill() to
inet_twsk_deschedule_put(), serializing the scheduling vs descheduling of
the timer. IOW, this prevents the following race:
tcp_time_wait()
inet_twsk_hashdance()
inet_twsk_deschedule_put()
del_timer_sync()
inet_twsk_schedule()
Thanks to Paolo Abeni for suggesting to leverage the ehash lock.
This also restores a comment from commit ec94c2696f ("tcp/dccp: avoid
one atomic operation for timewait hashdance") as inet_twsk_hashdance() had
a "Step 1" and "Step 3" comment, but the "Step 2" had gone missing.
inet_twsk_deschedule_put() now acquires the ehash spinlock to synchronize
with inet_twsk_hashdance_schedule().
To ease possible regression search, actual un-pin is done in next patch.
Link: https://lore.kernel.org/all/ZPhpfMjSiHVjQkTk@localhost.localdomain/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Process QP fatal events from the error event queue.
For that, find the QP, using QPN from the event, and then call its
event_handler. To find the QPs, store created RC QPs in an xarray.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1717754897-19858-1-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Wei Hu <weh@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
491aee894a ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391 ("net: use unrcu_pointer() helper")
b01e1c0307 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
reqsk_alloc() has a single caller, no need to expose it
in include/net/request_sock.h.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In reqsk_free(), use DEBUG_NET_WARN_ON_ONCE()
instead of WARN_ON_ONCE() for a condition which never fired.
In reqsk_put() directly call __reqsk_free(), there is no
point checking rsk_refcnt again right after a transition to zero.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Toke mentioned unrcu_pointer() existence, allowing
to remove some of the ugly casts we have when using
xchg() for rcu protected pointers.
Also make inet_rcv_compat const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240604111603.45871-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adding a sysctl knob to allow user to specify a default
rto_min at socket init time, other than using the hard
coded 200ms default rto_min.
Note that the rto_min route option has the highest precedence
for configuring this setting, followed by the TCP_BPF_RTO_MIN
socket option, followed by the tcp_rto_min_us sysctl.
Signed-off-by: Kevin Yang <yyd@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jaroslav reports Dell's OMSA Systems Management Data Engine
expects NLM_DONE in a separate recvmsg(), both for rtnl_dump_ifinfo()
and inet_dump_ifaddr(). We already added a similar fix previously in
commit 460b0d33cf ("inet: bring NLM_DONE out to a separate recv() again")
Instead of modifying all the dump handlers, and making them look
different than modern for_each_netdev_dump()-based dump handlers -
put the workaround in rtnetlink code. This will also help us move
the custom rtnl-locking from af_netlink in the future (in net-next).
Note that this change is not touching rtnl_dump_all(). rtnl_dump_all()
is different kettle of fish and a potential problem. We now mix families
in a single recvmsg(), but NLM_DONE is not coalesced.
Tested:
./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_addr.yaml \
--dump getaddr --json '{"ifa-family": 2}'
./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \
--dump getroute --json '{"rtm-family": 2}'
./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_link.yaml \
--dump getlink
Fixes: 3e41af9076 ("rtnetlink: use xarray iterator to implement rtnl_dump_ifinfo()")
Fixes: cdb2f80f1c ("inet: use xa_array iterator to implement inet_dump_ifaddr()")
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Link: https://lore.kernel.org/all/CAK8fFZ7MKoFSEzMBDAOjoUt+vTZRRQgLDNXEOfdCCXSoXXKE0g@mail.gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"struct devlink_dpipe_table_ops" only contains some function pointers.
Update "struct devlink_dpipe_table" and the 'table_ops' parameter of
devl_dpipe_table_register() so that structures in drivers can be
constified.
Constifying these structures will move some data to a read-only section, so
increase overall security.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'cfpktq' has been unused since
commit 73d6ac633c ("caif: code cleanup").
'caif_packet_funcs' is declared but never defined.
Remove both of them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I was doing some experiments, I found that when using the first
parameter, namely, struct net, in ip_metrics_convert() always triggers NULL
pointer crash. Then I digged into this part, realizing that we can remove
this one due to its uselessness.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
TLS (and hopefully soon PSP will) use EOR to prevent skbs
with different decrypted state from getting merged, without
adding new tests to the skb handling. In both cases once
the connection switches to an "encrypted" state, all subsequent
skbs will be encrypted, so a single "EOR fence" is sufficient
to prevent mixing.
Add a helper for setting the EOR bit, to make this arrangement
more explicit.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcp_skb_can_collapse() checks for conditions which don't make
sense on input. Because of this we ended up sprinkling a few
pairs of mptcp_skb_can_collapse() and skb_cmp_decrypted() calls
on the input path. Group them in a new helper. This should make
it less likely that someone will check mptcp and not decrypted
or vice versa when adding new code.
This implicitly adds a decrypted check early in tcp_collapse().
AFAIU this will very slightly increase our ability to collapse
packets under memory pressure, not a real bug.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dissect [no]csum, [no]dontfrag, [no]oam, [no]crit flags from skb metadata.
This is a prerequisite for matching these control flags using TC flower.
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
TCP_CLOSE may or may not have current/rnext keys and should not be
considered "established". The fast-path for TCP_CLOSE is
SKB_DROP_REASON_TCP_CLOSE. This is what tcp_rcv_state_process() does
anyways. Add an early drop path to not spend any time verifying
segment signatures for sockets in TCP_CLOSE state.
Cc: stable@vger.kernel.org # v6.7
Fixes: 0a3a809089 ("net/tcp: Verify inbound TCP-AO signed segments")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20240529-tcp_ao-sk_state-v1-1-d69b5d323c52@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5 has a dedicated queue for PTP packets. Clarify that
this sort of queues can also be accounted towards the base.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/20240529162922.3690698-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
56a5cf538c ("net: ti: icssg-prueth: Fix start counter for ft1 filter")
https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/
No other adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are too many ifdef in IPv6 segment routing code that may cause logic
problems. like commit 160e9d2752 ("ipv6: sr: fix invalid unregister error
path"). To avoid this, the init functions are redefined for both cases. The
code could be more clear after all fidefs are removed.
Suggested-by: Simon Horman <horms@kernel.org>
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240529040908.3472952-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No DSA driver makes use of the mac_prepare()/mac_finish() shimmed
operations anymore, so we can remove these.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1sByNx-00ELW1-Vp@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__dst_negative_advice() does not enforce proper RCU rules when
sk->dst_cache must be cleared, leading to possible UAF.
RCU rules are that we must first clear sk->sk_dst_cache,
then call dst_release(old_dst).
Note that sk_dst_reset(sk) is implementing this protocol correctly,
while __dst_negative_advice() uses the wrong order.
Given that ip6_negative_advice() has special logic
against RTF_CACHE, this means each of the three ->negative_advice()
existing methods must perform the sk_dst_reset() themselves.
Note the check against NULL dst is centralized in
__dst_negative_advice(), there is no need to duplicate
it in various callbacks.
Many thanks to Clement Lecigne for tracking this issue.
This old bug became visible after the blamed commit, using UDP sockets.
Fixes: a87cb3e48e ("net: Facility to report route quality of connected sockets")
Reported-by: Clement Lecigne <clecigne@google.com>
Diagnosed-by: Clement Lecigne <clecigne@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_reset() ends with a sequence that is carefuly ordered.
We need to fix [e]poll bugs in the following patches,
it makes sense to use a common helper.
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240528125253.1966136-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZlWtmQAKCRDbK58LschI
g0TUAQDT76jx7Rq1DShCtZ3eqiBMNkYczK8b+GqNsSG8YGduaAEA1jn/GN+H65Rh
atQZ/pYAfLZflMV04+XE0GyBr5q1uQg=
=NczG
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-28
We've added 23 non-merge commits during the last 11 day(s) which contain
a total of 45 files changed, 696 insertions(+), 277 deletions(-).
The main changes are:
1) Rename skb's mono_delivery_time to tstamp_type for extensibility
and add SKB_CLOCK_TAI type support to bpf_skb_set_tstamp(),
from Abhishek Chauhan.
2) Add netfilter CT zone ID and direction to bpf_ct_opts so that arbitrary
CT zones can be used from XDP/tc BPF netfilter CT helper functions,
from Brad Cowie.
3) Several tweaks to the instruction-set.rst IETF doc to address
the Last Call review comments, from Dave Thaler.
4) Small batch of riscv64 BPF JIT optimizations in order to emit more
compressed instructions to the JITed image for better icache efficiency,
from Xiao Wang.
5) Sort bpftool C dump output from BTF, aiming to simplify vmlinux.h
diffing and forcing more natural type definitions ordering,
from Mykyta Yatsenko.
6) Use DEV_STATS_INC() macro in BPF redirect helpers to silence
a syzbot/KCSAN race report for the tx_errors counter,
from Jiang Yunshui.
7) Un-constify bpf_func_info in bpftool to fix compilation with LLVM 17+
which started treating const structs as constants and thus breaking
full BTF program name resolution, from Ivan Babrou.
8) Fix up BPF program numbers in test_sockmap selftest in order to reduce
some of the test-internal array sizes, from Geliang Tang.
9) Small cleanup in Makefile.btf script to use test-ge check for v1.25-only
pahole, from Alan Maguire.
10) Fix bpftool's make dependencies for vmlinux.h in order to avoid needless
rebuilds in some corner cases, from Artem Savkov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
bpf, net: Use DEV_STAT_INC()
bpf, docs: Fix instruction.rst indentation
bpf, docs: Clarify call local offset
bpf, docs: Add table captions
bpf, docs: clarify sign extension of 64-bit use of 32-bit imm
bpf, docs: Use RFC 2119 language for ISA requirements
bpf, docs: Move sentence about returning R0 to abi.rst
bpf: constify member bpf_sysctl_kern:: Table
riscv, bpf: Try RVC for reg move within BPF_CMPXCHG JIT
riscv, bpf: Use STACK_ALIGN macro for size rounding up
riscv, bpf: Optimize zextw insn with Zba extension
selftests/bpf: Handle forwarding of UDP CLOCK_TAI packets
net: Add additional bit to support clockid_t timestamp type
net: Rename mono_delivery_time to tstamp_type for scalabilty
selftests/bpf: Update tests for new ct zone opts for nf_conntrack kfuncs
net: netfilter: Make ct zone opts configurable for bpf ct helpers
selftests/bpf: Fix prog numbers in test_sockmap
bpf: Remove unused variable "prev_state"
bpftool: Un-const bpf_func_info to fix it for llvm 17 and newer
bpf: Fix order of args in call to bpf_map_kvcalloc
...
====================
Link: https://lore.kernel.org/r/20240528105924.30905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the tagged commit, @netdev got documented twice and the kdoc
script didn't notice that. Remove the second description added later
and move the initial one according to the field position.
After merging commit 5f8e4007c1 ("kernel-doc: fix
struct_group_tagged() parsing"), kdoc requires to describe struct
groups as well. &page_pool_params has 2 struct groups which
generated new warnings, describe them to resolve this.
Fixes: 403f11ac9a ("page_pool: don't use driver-set flags field directly")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240524112859.2757403-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason commit made checks against ACK sequence less strict
and can be exploited by attackers to establish spoofed flows
with less probes.
Innocent users might use tcp_rmem[1] == 1,000,000,000,
or something more reasonable.
An attacker can use a regular TCP connection to learn the server
initial tp->rcv_wnd, and use it to optimize the attack.
If we make sure that only the announced window (smaller than 65535)
is used for ACK validation, we force an attacker to use
65537 packets to complete the 3WHS (assuming server ISN is unknown)
Fixes: 378979e94e ("tcp: remove 64 KByte limit for initial tp->rcv_wnd value")
Link: https://datatracker.ietf.org/meeting/119/materials/slides-119-tcpm-ghost-acks-00
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240523130528.60376-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mono_delivery_time was added to check if skb->tstamp has delivery
time in mono clock base (i.e. EDT) otherwise skb->tstamp has
timestamp in ingress and delivery_time at egress.
Renaming the bitfield from mono_delivery_time to tstamp_type is for
extensibilty for other timestamps such as userspace timestamp
(i.e. SO_TXTIME) set via sock opts.
As we are renaming the mono_delivery_time to tstamp_type, it makes
sense to start assigning tstamp_type based on enum defined
in this commit.
Earlier we used bool arg flag to check if the tstamp is mono in
function skb_set_delivery_time, Now the signature of the functions
accepts tstamp_type to distinguish between mono and real time.
Also skb_set_delivery_type_by_clockid is a new function which accepts
clockid to determine the tstamp_type.
In future tstamp_type:1 can be extended to support userspace timestamp
by increasing the bitfield.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509211834.3235191-2-quic_abchauha@quicinc.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Annotate 'sub_specs' of 'struct cfg80211_sar_specs', 'channels'
of 'struct cfg80211_sched_scan_request', 'channels' of 'struct
cfg80211_wowlan_nd_match', and 'matches' of 'struct
cfg80211_wowlan_nd_info' with '__counted_by' attribute. Briefly
tested with clang 18.1.1 and CONFIG_UBSAN_BOUNDS running iwlwifi.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240517153332.18271-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add flag for Full Bandwidth UL MU-MIMO for EHT. This is utilized
to pass EHT MU-MIMO configurations from user space to driver
in AP mode.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Link: https://msgid.link/20240515181327.12855-2-quic_pradeepc@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of passing the full TPE elements, in all their glory
and mixed up data formats for HE backward compatibility, parse
them fully into the right values, and pass that to the drivers.
Also introduce proper validation already in mac80211, so that
drivers don't need to do it, and parse the EHT portions.
The code now passes the values in the right order according to
the channel used by an interface, which could also be a subset
of the data advertised by the AP, if we couldn't connect with
the full bandwidth (for whatever reason.)
Also add kunit tests for the more complicated bits of it.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.2aa839969b60.I265b28209e0b29772b2f125f7f83de44a4da877b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Switch read and write software bits for PUDs
- Add missing hardware bits for PUDs and PMDs
- Generate unwind information for C modules to fix GDB unwind
error for vDSO functions
- Create .build-id links for unstripped vDSO files to enable
vDSO debugging with symbols
- Use standard stack frame layout for vDSO generated stack frames
to manually walk stack frames without DWARF information
- Rework perf_callchain_user() and arch_stack_walk_user() functions
to reduce code duplication
- Skip first stack frame when walking user stack
- Add basic checks to identify invalid instruction pointers when
walking stack frames
- Introduce and use struct stack_frame_vdso_wrapper within vDSO user
wrapper code to automatically generate an asm-offset define. Also
use STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to
document that the code works with user space stack
- Clear the backchain of the extra stack frame added by the vDSO user
wrapper code. This allows the user stack walker to detect and skip
the non-standard stack frame. Without this an incorrect instruction
pointer would be added to stack traces.
- Rewrite psw_idle() function in C to ease maintenance and further
enhancements
- Remove get_vtimer() function and use get_cpu_timer() instead
- Mark psw variable in __load_psw_mask() as __unitialized to avoid
superfluous clearing of PSW
- Remove obsolete and superfluous comment about removed TIF_FPU flag
- Replace memzero_explicit() and kfree() with kfree_sensitive() to
fix warnings reported by Coccinelle
- Wipe sensitive data and all copies of protected- or secure-keys
from stack when an IOCTL fails
- Both do_airq_interrupt() and do_io_interrupt() functions set
CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code
- Provide iucv_alloc_device() and iucv_release_device() helpers,
which can be used to deduplicate more or less identical IUCV
device allocation and release code in four different drivers
- Make use of iucv_alloc_device() and iucv_release_device()
helpers to get rid of quite some code and also remove a
cast to an incompatible function (clang W=1)
- There is no user of iucv_root outside of the core IUCV code left.
Therefore remove the EXPORT_SYMBOL
- __apply_alternatives() contains a runtime check which verifies
that the size of the to be patched code area is even. Convert
this to a compile time check
- Increase size of buffers for sending z/VM CP DIAGNOSE X'008'
commands from 128 to 240
- Do not accept z/VM CP DIAGNOSE X'008' commands longer than
maximally allowed
- Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead
of IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe
reIPL block on 'scp_data' sysfs attribute update
- Initialize the correct fields of the NVMe dump block, which
were confused with FCP fields
- Refactor macros for 'scp_data' (re-)IPL sysfs attribute to
reduce code duplication
- Introduce 'scp_data' sysfs attribute for dump IPL to allow tools
such as dumpconf passing additional kernel command line parameters
to a stand-alone dumper
- Rework the CPACF query functions to use the correct RRE or RRF
instruction formats and set instruction register fields correctly
- Instead of calling BUG() at runtime force a link error during
compile when a unsupported opcode is used with __cpacf_query()
or __cpacf_check_opcode() functions
- Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask
or /sys/bus/ap/aqmask sysfs file update with a relative mask value
- Fix "bindings complete" udev event which should be sent once all AP
devices have been bound to device drivers and again when unbind/bind
actions take place and all AP devices are bound again
- Facility list alt_stfle_fac_list is nowhere used in the decompressor,
therefore remove it there
- Remove custom kprobes insn slot allocator in favour of the standard
module_alloc() one, since kernel image and module areas are located
within 4GB
- Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid
calling memset() with a large byte count and get rid of the sparse
warning as result
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZkyx2BccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8PYZAP9KxEfTyUmIh61Gx8+m3BW5dy7p
E2Q8yotlUpGj49ul+AD8CEAyTiWR95AlMOVZZLV/0J7XIjhALvpKAGfiJWkvXgc=
=pife
-----END PGP SIGNATURE-----
Merge tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Switch read and write software bits for PUDs
- Add missing hardware bits for PUDs and PMDs
- Generate unwind information for C modules to fix GDB unwind error for
vDSO functions
- Create .build-id links for unstripped vDSO files to enable vDSO
debugging with symbols
- Use standard stack frame layout for vDSO generated stack frames to
manually walk stack frames without DWARF information
- Rework perf_callchain_user() and arch_stack_walk_user() functions to
reduce code duplication
- Skip first stack frame when walking user stack
- Add basic checks to identify invalid instruction pointers when
walking stack frames
- Introduce and use struct stack_frame_vdso_wrapper within vDSO user
wrapper code to automatically generate an asm-offset define. Also use
STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document
that the code works with user space stack
- Clear the backchain of the extra stack frame added by the vDSO user
wrapper code. This allows the user stack walker to detect and skip
the non-standard stack frame. Without this an incorrect instruction
pointer would be added to stack traces.
- Rewrite psw_idle() function in C to ease maintenance and further
enhancements
- Remove get_vtimer() function and use get_cpu_timer() instead
- Mark psw variable in __load_psw_mask() as __unitialized to avoid
superfluous clearing of PSW
- Remove obsolete and superfluous comment about removed TIF_FPU flag
- Replace memzero_explicit() and kfree() with kfree_sensitive() to fix
warnings reported by Coccinelle
- Wipe sensitive data and all copies of protected- or secure-keys from
stack when an IOCTL fails
- Both do_airq_interrupt() and do_io_interrupt() functions set
CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code
- Provide iucv_alloc_device() and iucv_release_device() helpers, which
can be used to deduplicate more or less identical IUCV device
allocation and release code in four different drivers
- Make use of iucv_alloc_device() and iucv_release_device() helpers to
get rid of quite some code and also remove a cast to an incompatible
function (clang W=1)
- There is no user of iucv_root outside of the core IUCV code left.
Therefore remove the EXPORT_SYMBOL
- __apply_alternatives() contains a runtime check which verifies that
the size of the to be patched code area is even. Convert this to a
compile time check
- Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands
from 128 to 240
- Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally
allowed
- Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of
IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL
block on 'scp_data' sysfs attribute update
- Initialize the correct fields of the NVMe dump block, which were
confused with FCP fields
- Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce
code duplication
- Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such
as dumpconf passing additional kernel command line parameters to a
stand-alone dumper
- Rework the CPACF query functions to use the correct RRE or RRF
instruction formats and set instruction register fields correctly
- Instead of calling BUG() at runtime force a link error during compile
when a unsupported opcode is used with __cpacf_query() or
__cpacf_check_opcode() functions
- Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask
or /sys/bus/ap/aqmask sysfs file update with a relative mask value
- Fix "bindings complete" udev event which should be sent once all AP
devices have been bound to device drivers and again when unbind/bind
actions take place and all AP devices are bound again
- Facility list alt_stfle_fac_list is nowhere used in the decompressor,
therefore remove it there
- Remove custom kprobes insn slot allocator in favour of the standard
module_alloc() one, since kernel image and module areas are located
within 4GB
- Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid
calling memset() with a large byte count and get rid of the sparse
warning as result
* tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
s390/zcrypt: Use kvcalloc() instead of kvmalloc_array()
s390/kprobes: Remove custom insn slot allocator
s390/boot: Remove alt_stfle_fac_list from decompressor
s390/ap: Fix bind complete udev event sent after each AP bus scan
s390/ap: Fix crash in AP internal function modify_bitmap()
s390/cpacf: Make use of invalid opcode produce a link error
s390/cpacf: Split and rework cpacf query functions
s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl
s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data'
s390/ipl: Fix incorrect initialization of nvme dump block
s390/ipl: Fix incorrect initialization of len fields in nvme reipl block
s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length
s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds
s390/alternatives: Convert runtime sanity check into compile time check
s390/iucv: Unexport iucv_root
tty: hvc-iucv: Make use of iucv_alloc_device()
s390/smsgiucv_app: Make use of iucv_alloc_device()
s390/netiucv: Make use of iucv_alloc_device()
s390/vmlogrdr: Make use of iucv_alloc_device()
s390/iucv: Provide iucv_alloc_device() / iucv_release_device()
...
- optimize DMA sync calls when they are no-ops (Alexander Lobakin)
- fix swiotlb padding for untrusted devices (Michael Kelley)
- add documentation for swiotb (Michael Kelley)
-----BEGIN PGP SIGNATURE-----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=Pa8W
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- optimize DMA sync calls when they are no-ops (Alexander Lobakin)
- fix swiotlb padding for untrusted devices (Michael Kelley)
- add documentation for swiotb (Michael Kelley)
* tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping:
dma: fix DMA sync for drivers not calling dma_set_mask*()
xsk: use generic DMA sync shortcut instead of a custom one
page_pool: check for DMA sync shortcut earlier
page_pool: don't use driver-set flags field directly
page_pool: make sure frag API fields don't span between cachelines
iommu/dma: avoid expensive indirect calls for sync operations
dma: avoid redundant calls for sync operations
dma: compile-out DMA sync op calls when not used
iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
Documentation/core-api: add swiotlb documentation
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmZFcFwQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpuP1EADKJOJRtcvO/av2cUR+HZFDC+s/jBwHIJK+
4UY633zQlxjqc7dt4rX7zk/uk4mkhZnsGY+wS6xH08kB3VO9YksrwREVt6Ur9lP8
UXNVPpPcZ7fFcIp41rYkZX9pTDp2N8z2qsVg7V8wcXJ7EeTXd6L4ZLjhfCiHvs2s
i6yIEwLrW+voYuqSFV7vWBIM3mSXSRTIiO2DqRAOtT2lsj374DOthvP2lOSSb5wq
6TF4s4z3HMGs+HF3rjP5kJ6ic6RdC6i31lzEivUMhwCiKN1AZXdp96KXaC+NVPRV
t5//EdS+pSenQgkg6XH7d5kzFoCUFJfVZt05w0GCqMA081Q9ySjUymN1zedJbGd9
8CDlW01N8XLqG6+F9yakJLSFY+mUFGduPuueTNiUJWP8kTkQCtYIRzZDeyjxQrE5
c17NW5S1uWkf26Ucyi1r+gxw9N4kGkuB3+NitC6DOc7BW5CocEIoqLWi/UH7cEZe
0v6loTakqBAdgh03RCDMUj9Rt/37pQs2KFT9/CazVpbkvkKsue4xK4K2CUFsxqOj
qcoc/LD62at4S3AUWwhUIs3YaQ7v/6AY5hIktqAwsFHmDffUbPdRrXWY1keKIprJ
4qS/sY0M+kvKGnp+80fPVHab9l6/fMLfabIyFuh0M3W/M4eHGt2YfKWreoGEy/1x
xLq2iq+ehw==
=S6Xt
-----END PGP SIGNATURE-----
Merge tag 'net-accept-more-20240515' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"This adds support for IORING_CQE_F_SOCK_NONEMPTY for io_uring accept
requests.
This is very similar to previous work that enabled the same hint for
doing receives on sockets. By far the majority of the work here is
refactoring to enable the networking side to pass back whether or not
the socket had more pending requests after accepting the current one,
the last patch just wires it up for io_uring.
Not only does this enable applications to know whether there are more
connections to accept right now, it also enables smarter logic for
io_uring multishot accept on whether to retry immediately or wait for
a poll trigger"
* tag 'net-accept-more-20240515' of git://git.kernel.dk/linux:
io_uring/net: wire up IORING_CQE_F_SOCK_NONEMPTY for accept
net: pass back whether socket was empty post accept
net: have do_accept() take a struct proto_accept_arg argument
net: change proto and proto_ops accept type
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
There is no user of iucv_root outside of the core IUCV code left.
Therefore remove the EXPORT_SYMBOL.
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240506194454.1160315-7-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Provide iucv_alloc_device() and iucv_release_device() helper functions,
which can be used to deduplicate more or less identical IUCV device
allocation and release code in four different drivers.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240506194454.1160315-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Add 2 byte padding to napi_gro_cb struct to ensure zeroed member is
aligned after flush_id member was removed in the original commit.
Fixes: 4b0ebbca3e ("net: gro: move L3 flush checks to tcp_gro_receive and udp_gro_receive_segment")
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Link: https://lore.kernel.org/r/fca08735-c245-49e5-af72-82900634f144@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If hdev->le_num_of_adv_sets is set to 1 it means that only handle 0x00
can be used, but since the MGMT interface instances start from 1
(instance 0 means all instances in case of MGMT_OP_REMOVE_ADVERTISING)
the code needs to map the instance to handle otherwise users will not be
able to advertise as instance 1 would attempt to use handle 0x01.
Fixes: 1d0fac2c38 ("Bluetooth: Use controller sets when available")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.
Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.
Fixes: e7b02296fb ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time
via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE
(for strcpy/memcpy-family functions).
Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are
getting ready to enable it globally.
So, use the `DEFINE_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
With these changes, fix the following warning:
net/bluetooth/hci_conn.c:669:41: warning: structure containing a
flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On our DUT, we can see that the host issues create connection cancel
command after 4-sec if there is no connection complete event for
LE create connection cmd.
As per core spec v5.3 section 7.8.5, advertisement interval range is-
Advertising_Interval_Min
Default : 0x0800(1.28s)
Time Range: 20ms to 10.24s
Advertising_Interval_Max
Default : 0x0800(1.28s)
Time Range: 20ms to 10.24s
If the remote device is using adv interval of > 4 sec, it is
difficult to make a connection with the current timeout value.
Also, with the default interval of 1.28 sec, we will get only
3 chances to capture the adv packets with the 4 sec window.
Hence we want to increase this timeout to 20sec.
Signed-off-by: Mahesh Talewad <mahesh.talewad@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Previously LE flow credits were returned to the
sender even if the socket's receive buffer was
full. This meant that no back-pressure
was applied to the sender, thus it continued to
send data, resulting in data loss without any
error being reported. Furthermore, the amount
of credits was essentially fixed to a small
amount, leading to reduced performance.
This is fixed by computing the number of returned
LE flow credits based on the estimated available
space in the receive buffer of an L2CAP socket.
Consequently, if the receive buffer is full, no
credits are returned until the buffer is read and
thus cleared by user-space.
Since the computation of available receive buffer
space can only be performed approximately (due to
sk_buff overhead) and the receive buffer size may
be changed by user-space after flow credits have
been sent, superfluous received data is temporary
stored within l2cap_pinfo. This is necessary
because Bluetooth LE provides no retransmission
mechanism once the data has been acked by the
physical layer.
If receive buffer space estimation is not possible
at the moment, we fall back to providing credits
for one full packet as before. This is currently
the case during connection setup, when MPS is not
yet available.
Fixes: b1c325c23d ("Bluetooth: Implement returning of LE L2CAP credits")
Signed-off-by: Sebastian Urban <surban@surban.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time
via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE
(for strcpy/memcpy-family functions).
Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are
getting ready to enable it globally.
So, use the `DEFINE_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
With these changes, fix the following warning:
net/bluetooth/hci_conn.c:2116:50: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time
via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE
(for strcpy/memcpy-family functions).
Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are
getting ready to enable it globally.
So, use the `DEFINE_FLEX()` helper for multiple on-stack definitions
of a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
Notice that, due to the use of `__counted_by()` in `struct
hci_cp_le_create_cis`, the for loop in function `hci_cs_le_create_cis()`
had to be modified. Once the index `i`, through which `cp->cis[i]` is
accessed, falls in the interval [0, cp->num_cis), `cp->num_cis` cannot
be decremented all the way down to zero while accessing `cp->cis[]`:
net/bluetooth/hci_event.c:4310:
4310 for (i = 0; cp->num_cis; cp->num_cis--, i++) {
...
4314 handle = __le16_to_cpu(cp->cis[i].cis_handle);
otherwise, only half (one iteration before `cp->num_cis == i`) or half
plus one (one iteration before `cp->num_cis < i`) of the items in the
array will be accessed before running into an out-of-bounds issue. So,
in order to avoid this, set `cp->num_cis` to zero just after the for
loop.
Also, make use of `aux_num_cis` variable to update `cmd->num_cis` after
a `list_for_each_entry_rcu()` loop.
With these changes, fix the following warnings:
net/bluetooth/hci_sync.c:1239:56: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:1415:51: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:1731:51: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:6497:45: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
There are currently a couple of objects (`req` and `rsp`), in a couple
of structures, that contain flexible structures (`struct l2cap_ecred_conn_req`
and `struct l2cap_ecred_conn_rsp`), for example:
struct l2cap_ecred_rsp_data {
struct {
struct l2cap_ecred_conn_rsp rsp;
__le16 scid[L2CAP_ECRED_MAX_CID];
} __packed pdu;
int count;
};
in the struct above, `struct l2cap_ecred_conn_rsp` is a flexible
structure:
struct l2cap_ecred_conn_rsp {
__le16 mtu;
__le16 mps;
__le16 credits;
__le16 result;
__le16 dcid[];
};
So, in order to avoid ending up with a flexible-array member in the
middle of another structure, we use the `struct_group_tagged()` (and
`__struct_group()` when the flexible structure is `__packed`) helper
to separate the flexible array from the rest of the members in the
flexible structure:
struct l2cap_ecred_conn_rsp {
struct_group_tagged(l2cap_ecred_conn_rsp_hdr, hdr,
... the rest of members
);
__le16 dcid[];
};
With the change described above, we now declare objects of the type of
the tagged struct, in this example `struct l2cap_ecred_conn_rsp_hdr`,
without embedding flexible arrays in the middle of other structures:
struct l2cap_ecred_rsp_data {
struct {
struct l2cap_ecred_conn_rsp_hdr rsp;
__le16 scid[L2CAP_ECRED_MAX_CID];
} __packed pdu;
int count;
};
Also, when the flexible-array member needs to be accessed, we use
`container_of()` to retrieve a pointer to the flexible structure.
We also use the `DEFINE_RAW_FLEX()` helper for a couple of on-stack
definitions of a flexible structure where the size of the flexible-array
member is known at compile-time.
So, with these changes, fix the following warnings:
net/bluetooth/l2cap_core.c:1260:45: warning: structure containing a
flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/l2cap_core.c:3740:45: warning: structure containing a
flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/l2cap_core.c:4999:45: warning: structure containing a
flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/l2cap_core.c:7116:47: warning: structure containing a
flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In case of a Broadcast Source that has PA enabled but no active BIG,
a Broadcast Sink needs to establish PA sync and parse BASE from PA
reports.
This commit moves the allocation of a PA sync hcon from the BIGInfo
advertising report event to the PA sync established event. After the
first complete PA report, the hcon is notified to the ISO layer. A
child socket is allocated and enqueued in the parent's accept queue.
BIGInfo reports also need to be processed, to extract the encryption
field and inform userspace. After the first BIGInfo report is received,
the PA sync hcon is notified again to the ISO layer. Since a socket will
be found this time, the socket state will transition to BT_CONNECTED and
the userspace will be woken up using sk_state_change.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes iso_get_sock_listen more generic, to return matching socket
in the state provided as argument.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds proper definitions for scan interval and window and then make
use of them instead their values.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The sysctl lists the available schedulers that can be set using
net.mptcp.scheduler similarly to net.ipv4.tcp_available_congestion_control.
Signed-off-by: Gregory Detal <gregory.detal@gmail.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-5-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're going to send an RST due to invalid syn packet which is already
checked whether 1) it is in sequence, 2) it is a retransmitted skb.
As RFC 793 says, if the state of socket is not CLOSED/LISTEN/SYN-SENT,
then we should send an RST when receiving bad syn packet:
"fourth, check the SYN bit,...If the SYN is in the window it is an
error, send a reset"
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://lore.kernel.org/r/20240510122502.27850-6-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two possible cases where TCP layer can send an RST. Since they
happen in the same place, I think using one independent reason is enough
to identify this special situation.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://lore.kernel.org/r/20240510122502.27850-5-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Like the previous patch does in this series, finish the conversion map is
enough to let rstreason mechanism work in this function.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://lore.kernel.org/r/20240510122502.27850-4-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Based on the existing skb drop reason, updating the rstreason map can
help us finish the rstreason job in this function.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://lore.kernel.org/r/20240510122502.27850-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In this function, only updating the map can finish the job for socket
reset reason because the corresponding drop reasons are ready.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://lore.kernel.org/r/20240510122502.27850-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds an 'is_empty' argument to struct proto_accept_arg, which can
be used to pass back information on whether or not the given socket has
more connections to accept post the one just accepted.
To utilize this information, the caller should initialize the 'is_empty'
field to, eg, -1 and then check for 0/1 after the accept. If the field
has been set, the caller knows whether there are more pending connections
or not. If the field remains -1 after the accept call, the protocol
doesn't support passing back this information.
This patch wires it up for ipv4/6 TCP.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than pass in flags, error pointer, and whether this is a kernel
invocation or not, add a struct proto_accept_arg struct as the argument.
This then holds all of these arguments, and prepares accept for being
able to pass back more information.
No functional changes in this patch.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZkGcZAAKCRDbK58LschI
g6o6APwLsqhrM2w71VUN5ciCxu4H5VDtZp6wkdqtVbxxU4qNxQEApKgYgKt8ZLF3
Kily5c7m+S4ZXhMX21rb8JhSAz0dfQk=
=5Dk7
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-13
We've added 119 non-merge commits during the last 14 day(s) which contain
a total of 134 files changed, 9462 insertions(+), 4742 deletions(-).
The main changes are:
1) Add BPF JIT support for 32-bit ARCv2 processors, from Shahab Vahedi.
2) Add BPF range computation improvements to the verifier in particular
around XOR and OR operators, refactoring of checks for range computation
and relaxing MUL range computation so that src_reg can also be an unknown
scalar, from Cupertino Miranda.
3) Add support to attach kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. Session mode is a common use-case for tetragon and bpftrace,
from Jiri Olsa.
4) Fix a potential overflow in libbpf's ring__consume_n() and improve libbpf
as well as BPF selftest's struct_ops handling, from Andrii Nakryiko.
5) Improvements to BPF selftests in context of BPF gcc backend,
from Jose E. Marchesi & David Faust.
6) Migrate remaining BPF selftest tests from test_sock_addr.c to prog_test-
-style in order to retire the old test, run it in BPF CI and additionally
expand test coverage, from Jordan Rife.
7) Big batch for BPF selftest refactoring in order to remove duplicate code
around common network helpers, from Geliang Tang.
8) Another batch of improvements to BPF selftests to retire obsolete
bpf_tcp_helpers.h as everything is available vmlinux.h,
from Martin KaFai Lau.
9) Fix BPF map tear-down to not walk the map twice on free when both timer
and wq is used, from Benjamin Tissoires.
10) Fix BPF verifier assumptions about socket->sk that it can be non-NULL,
from Alexei Starovoitov.
11) Change BTF build scripts to using --btf_features for pahole v1.26+,
from Alan Maguire.
12) Small improvements to BPF reusing struct_size() and krealloc_array(),
from Andy Shevchenko.
13) Fix s390 JIT to emit a barrier for BPF_FETCH instructions,
from Ilya Leoshkevich.
14) Extend TCP ->cong_control() callback in order to feed in ack and
flag parameters and allow write-access to tp->snd_cwnd_stamp
from BPF program, from Miao Xu.
15) Add support for internal-only per-CPU instructions to inline
bpf_get_smp_processor_id() helper call for arm64 and riscv64 BPF JITs,
from Puranjay Mohan.
16) Follow-up to remove the redundant ethtool.h from tooling infrastructure,
from Tushar Vyavahare.
17) Extend libbpf to support "module:<function>" syntax for tracing
programs, from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
bpf: make list_for_each_entry portable
bpf: ignore expected GCC warning in test_global_func10.c
bpf: disable strict aliasing in test_global_func9.c
selftests/bpf: Free strdup memory in xdp_hw_metadata
selftests/bpf: Fix a few tests for GCC related warnings.
bpf: avoid gcc overflow warning in test_xdp_vlan.c
tools: remove redundant ethtool.h from tooling infra
selftests/bpf: Expand ATTACH_REJECT tests
selftests/bpf: Expand getsockname and getpeername tests
sefltests/bpf: Expand sockaddr hook deny tests
selftests/bpf: Expand sockaddr program return value tests
selftests/bpf: Retire test_sock_addr.(c|sh)
selftests/bpf: Remove redundant sendmsg test cases
selftests/bpf: Migrate ATTACH_REJECT test cases
selftests/bpf: Migrate expected_attach_type tests
selftests/bpf: Migrate wildcard destination rewrite test
selftests/bpf: Migrate sendmsg6 v4 mapped address tests
selftests/bpf: Migrate sendmsg deny test cases
selftests/bpf: Migrate WILDCARD_IP test
selftests/bpf: Handle SYSCALL_EPERM and SYSCALL_ENOTSUPP test cases
...
====================
Link: https://lore.kernel.org/r/20240513134114.17575-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The origin ax25_dev_list implements its own single linked list,
which is complicated and error-prone. For example, when deleting
the node of ax25_dev_list in ax25_dev_device_down(), we have to
operate on the head node and other nodes separately.
This patch uses kernel universal linked list to replace original
ax25_dev_list, which make the operation of ax25_dev_list easier.
We should do "dev->ax25_ptr = ax25_dev;" and "dev->ax25_ptr = NULL;"
while holding the spinlock, otherwise the ax25_dev_device_up() and
ax25_dev_device_down() could race.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/85bba3af651ca0e1a519da8d0d715b949891171c.1715247018.git.duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TX queue stop and wake are counted by some drivers.
Support reporting these via netdev-genl queue stats.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240510201927.1821109-2-danielj@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
{inet,ipv6}_gro_receive functions perform flush checks (ttl, flags,
iph->id, ...) against all packets in a loop. These flush checks are used in
all merging UDP and TCP flows.
These checks need to be done only once and only against the found p skb,
since they only affect flush and not same_flow.
This patch leverages correct network header offsets from the cb for both
outer and inner network headers - allowing these checks to be done only
once, in tcp_gro_receive and udp_gro_receive_segment. As a result,
NAPI_GRO_CB(p)->flush is not used at all. In addition, flush_id checks are
more declarative and contained in inet_gro_flush, thus removing the need
for flush_id in napi_gro_cb.
This results in less parsing code for non-loop flush tests for TCP and UDP
flows.
To make sure results are not within noise range - I've made netfilter drop
all TCP packets, and measured CPU performance in GRO (in this case GRO is
responsible for about 50% of the CPU utilization).
perf top while replaying 64 parallel IP/TCP streams merging in GRO:
(gro_receive_network_flush is compiled inline to tcp_gro_receive)
net-next:
6.94% [kernel] [k] inet_gro_receive
3.02% [kernel] [k] tcp_gro_receive
patch applied:
4.27% [kernel] [k] tcp_gro_receive
4.22% [kernel] [k] inet_gro_receive
perf top while replaying 64 parallel IP/IP/TCP streams merging in GRO (same
results for any encapsulation, in this case inet_gro_receive is top
offender in net-next)
net-next:
10.09% [kernel] [k] inet_gro_receive
2.08% [kernel] [k] tcp_gro_receive
patch applied:
6.97% [kernel] [k] inet_gro_receive
3.68% [kernel] [k] tcp_gro_receive
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240509190819.2985-3-richardbgobert@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch converts references of skb->network_header to napi_gro_cb's
network_offset and inner_network_offset.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240509190819.2985-2-richardbgobert@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmZA578ACgkQ1V2XiooU
IOS18g//Zyuv+23GcUM7+FEXrlMN658xJyWiYvKjOaZZx5ZiV0QdZc4cbfPFD44p
qZBMmVC/WVoC89SLdwH1W47KoJU0xsK3/OdqGHHeNJ69111wIQMpOLfAetS2K0mb
F+Ue2vyWg1GQDICGsCdenHX7ihtVvnJJkomxc+3ObxtLCNsb2Dsr6JM5hMVP5Bil
4UZnPsrgfWy3A8O92burlPVE1sTWDFfFUGIf8geJc4QadwkgufkzxMhXNO7xHlpG
EZ99s8FPyD3R6tRPjf4gwdjr7JjinrdrYjZDuS4d3Uv8pKlUqcx8PgXG51/unr/y
qlynLXtEc1QU6SO2jENosHAG2/LQG2zsYEiiLFCP+a1JOtOxevZQKx8MyAFW8xDX
+RQhcBpTBocIyJ/tCDoM9lp69iYTR196Ct48v6pSGMNhZcddT4K4BkUL47GEs8T3
IA5x8h5gV2Q9ECMgqSaycdUsfLNgE/6fWx0ROs/wo3tMsgWrXCSJi8RFtN1sNbIO
rfuNnQiETIFBkQxBi7um8jadxdfIHm65cjgZBCyVbNNml3JwjYvXLxCXt2G7LxC4
Sg4nZvIbqWIifoMc1aQKypvFZjzzsWtFmYCuEUVLrnpj2SFTyh5CNzNo3MlHf7LG
sRb/XubdY6e0spLzd5VDjwH5qOT3poWAccatRr5BVUarxXCD5Vs=
=RD9p
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
Patch #1 skips transaction if object type provides no .update interface.
Patch #2 skips NETDEV_CHANGENAME which is unused.
Patch #3 enables conntrack to handle Multicast Router Advertisements and
Multicast Router Solicitations from the Multicast Router Discovery
protocol (RFC4286) as untracked opposed to invalid packets.
From Linus Luessing.
Patch #4 updates DCCP conntracker to mark invalid as invalid, instead of
dropping them, from Jason Xing.
Patch #5 uses NF_DROP instead of -NF_DROP since NF_DROP is 0,
also from Jason.
Patch #6 removes reference in netfilter's sysctl documentation on pickup
entries which were already removed by Florian Westphal.
Patch #7 removes check for IPS_OFFLOAD flag to disable early drop which
allows to evict entries from the conntrack table,
also from Florian.
Patches #8 to #16 updates nf_tables pipapo set backend to allocate
the datastructure copy on-demand from preparation phase,
to better deal with OOM situations where .commit step is too late
to fail. Series from Florian Westphal.
Patch #17 adds a selftest with packetdrill to cover conntrack TCP state
transitions, also from Florian.
Patch #18 use GFP_KERNEL to clone elements from control plane to avoid
quick atomic reserves exhaustion with large sets, reporter refers
to million entries magnitude.
* tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: allow clone callbacks to sleep
selftests: netfilter: add packetdrill based conntrack tests
netfilter: nft_set_pipapo: remove dirty flag
netfilter: nft_set_pipapo: move cloning of match info to insert/removal path
netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone
netfilter: nft_set_pipapo: merge deactivate helper into caller
netfilter: nft_set_pipapo: prepare walk function for on-demand clone
netfilter: nft_set_pipapo: prepare destroy function for on-demand clone
netfilter: nft_set_pipapo: make pipapo_clone helper return NULL
netfilter: nft_set_pipapo: move prove_locking helper around
netfilter: conntrack: remove flowtable early-drop test
netfilter: conntrack: documentation: remove reference to non-existent sysctl
netfilter: use NF_DROP instead of -NF_DROP
netfilter: conntrack: dccp: try not to drop skb in conntrack
netfilter: conntrack: fix ct-state for ICMPv6 Multicast Router Discovery
netfilter: nf_tables: remove NETDEV_CHANGENAME from netdev chain event handler
netfilter: nf_tables: skip transaction if update object is not implemented
====================
Link: https://lore.kernel.org/r/20240512161436.168973-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZj3BiQAKCRCRxhvAZXjc
ogOqAQCTrBxqvPw9jTtpKg7yN6pgnY+WT8dBZMysw4x7pBa5SAD/QEYR73rXFPPI
8xxt/5YnA9oWJ792U+8xHWQ5idXK/wU=
=BNki
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.10.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rw iterator updates from Christian Brauner:
"The core fs signalfd, userfaultfd, and timerfd subsystems did still
use f_op->read() instead of f_op->read_iter(). Convert them over since
we should aim to get rid of f_op->read() at some point.
Aside from that io_uring and others want to mark files as FMODE_NOWAIT
so it can make use of per-IO nonblocking hints to enable more
efficient IO. Converting those users to f_op->read_iter() allows them
to be marked with FMODE_NOWAIT"
* tag 'vfs-6.10.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
signalfd: convert to ->read_iter()
userfaultfd: convert to ->read_iter()
timerfd: convert to ->read_iter()
new helper: copy_to_iter_full()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZj3PiAAKCRCRxhvAZXjc
ojXMAP4vIKnxNOf0qXNDHkMvIXw9gYxtHXQfOWCEokcRdBPxlQEArhZNz/TBWhH2
lEbE/mM1PUYhpqGh+K19IX503l87NQA=
=gyKJ
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.10.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This reworks the netfslib writeback implementation so that pages read
from the cache are written to the cache through ->writepages(),
thereby allowing the fscache page flag to be retired.
The reworking also:
- builds on top of the new writeback_iter() infrastructure
- makes it possible to use vectored write RPCs as discontiguous
streams of pages can be accommodated
- makes it easier to do simultaneous content crypto and stream
division
- provides support for retrying writes and re-dividing a stream
- replaces the ->launder_folio() op, so that ->writepages() is used
instead
- uses mempools to allocate the netfs_io_request and
netfs_io_subrequest structs to avoid allocation failure in the
writeback path
Some code that uses the fscache page flag is retained for
compatibility purposes with nfs and ceph. The code is switched to
using the synonymous private_2 label instead and marked with
deprecation comments.
The merge commit contains additional details on the new algorithm that
I've left out of here as it would probably be excessively detailed.
On top of the netfslib infrastructure this contains the work to
convert cifs over to netfslib"
* tag 'vfs-6.10.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
cifs: Enable large folio support
cifs: Remove some code that's no longer used, part 3
cifs: Remove some code that's no longer used, part 2
cifs: Remove some code that's no longer used, part 1
cifs: Cut over to using netfslib
cifs: Implement netfslib hooks
cifs: Make add_credits_and_wake_if() clear deducted credits
cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs
cifs: Set zero_point in the copy_file_range() and remap_file_range()
cifs: Move cifs_loose_read_iter() and cifs_file_write_iter() to file.c
cifs: Replace the writedata replay bool with a netfs sreq flag
cifs: Make wait_mtu_credits take size_t args
cifs: Use more fields from netfs_io_subrequest
cifs: Replace cifs_writedata with a wrapper around netfs_io_subrequest
cifs: Replace cifs_readdata with a wrapper around netfs_io_subrequest
cifs: Use alternative invalidation to using launder_folio
netfs, afs: Use writeback retry to deal with alternate keys
netfs: Miscellaneous tidy ups
netfs: Remove the old writeback code
netfs: Cut over to using new writeback code
...
Commit 1af2dface5 ("af_unix: Don't access successor in unix_del_edges()
during GC.") fixed use-after-free by avoid accessing edge->successor while
GC is in progress.
However, there could be a small race window where another process could
call unix_del_edges() while gc_in_progress is true and __skb_queue_purge()
is on the way.
So, we need another marker for struct scm_fp_list which indicates if the
skb is garbage-collected.
This patch adds dead flag in struct scm_fp_list and set it true before
calling __skb_queue_purge().
Fixes: 1af2dface5 ("af_unix: Don't access successor in unix_del_edges() during GC.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240508171150.50601-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aPYm
-----END PGP SIGNATURE-----
Merge tag 'gtp-24-05-07' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/gtp
Pablo neira Ayuso says:
====================
gtp pull request 24-05-07
This v3 includes:
- fix for clang uninitialized variable per Jakub.
- address Smatch and Coccinelle reports per Simon
- remove inline in new IPv6 support per Simon
- fix memleaks in netlink control plane per Simon
-o-
The following patchset contains IPv6 GTP driver support for net-next,
this also includes IPv6 over IPv4 and vice-versa:
Patch #1 removes a unnecessary stack variable initialization in the
socket routine.
Patch #2 deals with GTP extension headers. This variable length extension
header to decapsulate packets accordingly. Otherwise, packets are
dropped when these extension headers are present which breaks
interoperation with other non-Linux based GTP implementations.
Patch #3 prepares for IPv6 support by moving IPv4 specific fields in PDP
context objects to a union.
Patch #4 adds IPv6 support while retaining backward compatibility.
Three new attributes allows to declare an IPv6 GTP tunnel
GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6 as well as
IFLA_GTP_LOCAL6 to declare the IPv6 GTP UDP socket. Up to this
patch, only IPv6 outer in IPv6 inner is supported.
Patch #5 uses IPv6 address /64 prefix for UE/MS in the inner headers.
Unlike IPv4, which provides a 1:1 mapping between UE/MS,
IPv6 tunnel encapsulates traffic for /64 address as specified
by 3GPP TS. Patch has been split from Patch #4 to highlight
this behaviour.
Patch #6 passes up IPv6 link-local traffic, such as IPv6 SLAAC, for
handling to userspace so they are handled as control packets.
Patch #7 prepares to allow for GTP IPv4 over IPv6 and vice-versa by
moving IP specific debugging out of the function to build
IPv4 and IPv6 GTP packets.
Patch #8 generalizes TOS/DSCP handling following similar approach as
in the existing iptunnel infrastructure.
Patch #9 adds a helper function to build an IPv4 GTP packet in the outer
header.
Patch #10 adds a helper function to build an IPv6 GTP packet in the outer
header.
Patch #11 adds support for GTP IPv4-over-IPv6 and vice-versa.
Patch #12 allows to use the same TID/TEID (tunnel identifier) for inner
IPv4 and IPv6 packets for better UE/MS dual stack integration.
This series integrates with the osmocom.org project CI and TTCN-3 test
infrastructure (Oliver Smith) as well as the userspace libgtpnl library.
Thanks to Harald Welte, Oliver Smith and Pau Espin for reviewing and
providing feedback through the osmocom.org redmine platform to make this
happen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Auhagen reports transaction failures with following error:
./main.nft:13:1-26: Error: Could not process rule: Cannot allocate memory
percpu: allocation failed, size=16 align=8 atomic=1, atomic alloc failed, no space left
This points to failing pcpu allocation with GFP_ATOMIC flag.
However, transactions happen from user context and are allowed to sleep.
One case where we can call into percpu allocator with GFP_ATOMIC is
nft_counter expression.
Normally this happens from control plane, so this could use GFP_KERNEL
instead. But one use case, element insertion from packet path,
needs to use GFP_ATOMIC allocations (nft_dynset expression).
At this time, .clone callbacks always use GFP_ATOMIC for this reason.
Add gfp_t argument to the .clone function and pass GFP_KERNEL or
GFP_ATOMIC flag depending on context, this allows all clone memory
allocations to sleep for the normal (transaction) case.
Cc: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
DCCP is going away soon, and had no twsk_unique() method.
We can directly call tcp_twsk_unique() for TCP sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240507164140.940547-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfba ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5f ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The third, and most likely the last, "new features" pull request for
v6.10 with changes both in stack and in drivers. In ath12k and rtw89
we disabled Wireless Extensions just like with iwlwifi earlier. Wi-Fi
7 devices will not support Wireless Extensions (WEXT) anymore so if
someone is still using the legacy WEXT interface it's time to switch
to nl80211 now!
We merged wireless into wireless-next as we decided not to send a
wireless pull request to v6.9 this late in the cycle. Also an
immutable branch with MHI subsystem was merged to get ath11k and
ath12k hibernation working.
Major changes:
mac80211/cfg80211
* handle color change per link
mt76
* mt7921 LED control
* mt7925 EHT radiotap support
* mt7920e PCI support
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
rtw89
* complete features of new WiFi 7 chip 8922AE including BT-coexistence
and WoWLAN
* use BIOS ACPI settings to set TX power and channels
* disable Wireless Extensios on Wi-Fi 7 devices
iwlwifi
* block_esr debugfs file
* support again firmware API 90 (was reverted earlier)
* provide channel survey information for Automatic Channel Selection (ACS)
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmY7aisRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuILQgAmcfU9EJca08qqI2dvcu/X3C/WBVaOQUC
3sdvdGfaO9bTXDjbt0KfmhYNc0BHIM1Jzbegmhe80k6/4cnkWh0JgGZbgMMZGL+V
KI8ejbjY1BpfReApiL37DzSUWh176u4jNhUhifRXrLYxBkoZ5goUX8u6meMZHuj4
8EBfW7xGhtmMn2Po+bUYNXsczWR+mcfxfNF3vfyYIIsuJz2wbONcRuc0Hvq1mHmC
Ebtq7myY/SQvLtILGZxwAhdgHH8AgCN9R5WpzcCHze8t8xmmt4CjdwS6BGwmaBNM
NoGnzHvDG0u+dUYcY/x1tiky9PKRjMtMW+GvYPUvjy5j3nDDXeq51w==
=tf9q
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The third, and most likely the last, "new features" pull request for
v6.10 with changes both in stack and in drivers. In ath12k and rtw89
we disabled Wireless Extensions just like with iwlwifi earlier. Wi-Fi
7 devices will not support Wireless Extensions (WEXT) anymore so if
someone is still using the legacy WEXT interface it's time to switch
to nl80211 now!
We merged wireless into wireless-next as we decided not to send a
wireless pull request to v6.9 this late in the cycle. Also an
immutable branch with MHI subsystem was merged to get ath11k and
ath12k hibernation working.
Major changes:
mac80211/cfg80211
* handle color change per link
mt76
* mt7921 LED control
* mt7925 EHT radiotap support
* mt7920e PCI support
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
rtw89
* complete features of new WiFi 7 chip 8922AE including BT-coexistence
and WoWLAN
* use BIOS ACPI settings to set TX power and channels
* disable Wireless Extensios on Wi-Fi 7 devices
iwlwifi
* block_esr debugfs file
* support again firmware API 90 (was reverted earlier)
* provide channel survey information for Automatic Channel Selection (ACS)
* tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (214 commits)
wifi: mwl8k: initialize cmd->addr[] properly
wifi: iwlwifi: Ensure prph_mac dump includes all addresses
wifi: iwlwifi: mvm: don't request statistics in restart
wifi: iwlwifi: mvm: exit EMLSR if secondary link is not used
wifi: iwlwifi: mvm: add beacon template version 14
wifi: iwlwifi: mvm: align UATS naming with firmware
wifi: iwlwifi: Force SCU_ACTIVE for specific platforms
wifi: iwlwifi: mvm: record and return channel survey information
wifi: iwlwifi: mvm: add the firmware API for channel survey
wifi: iwlwifi: mvm: Fix race in scan completion
wifi: iwlwifi: mvm: Add a print for invalid link pair due to bandwidth
wifi: iwlwifi: mvm: add a debugfs for reading EMLSR blocking reasons
wifi: iwlwifi: mvm: Add active EMLSR blocking reasons prints
wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
wifi: iwlwifi: mvm: fix primary link setting
wifi: iwlwifi: mvm: use already determined cmd_id
wifi: iwlwifi: mvm: don't reset link selection during restart
wifi: iwlwifi: Print EMLSR states name
wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active
wifi: iwlwifi: mvm: fix typo in debug print
...
====================
Link: https://lore.kernel.org/r/20240508120726.85A10C113CC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst_cache->reset_ts is read or written locklessly,
add READ_ONCE() and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240507132000.614591-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some switches like Microchip KSZ variants do not support per port DSCP
priority configuration. Instead there is a global DSCP mapping table.
To handle it, we will accept set/del request to any of user ports to
make global configuration and update dcb app entries for all other
ports.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
IEEE 802.1q specification provides recommendation and examples which can
be used as good default values for different drivers.
This patch implements mapping examples documented in IEEE 802.1Q-2022 in
Annex I "I.3 Traffic type to traffic class mapping" and IETF DSCP naming
and mapping DSCP to Traffic Type inspired by RFC8325.
This helpers will be used in followup patches for dsa/microchip DCB
implementation.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add DCB support to get/set trust configuration for different packet
priority information sources. Some switch allow to chose different
source of packet priority classification. For example on KSZ switches it
is possible to configure VLAN PCP and/or DSCP sources.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XSk infra's been using its own DMA sync shortcut to try avoiding
redundant function calls. Now that there is a generic one, remove
the custom implementation and rely on the generic helpers.
xsk_buff_dma_sync_for_cpu() doesn't need the second argument anymore,
remove it.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
page_pool::p is driver-defined params, copied directly from the
structure passed to page_pool_create(). The structure isn't meant
to be modified by the Page Pool core code and this even might look
confusing[0][1].
In order to be able to alter some flags, let's define our own, internal
fields the same way as the already existing one (::has_init_callback).
They are defined as bits in the driver-set params, leave them so here
as well, to not waste byte-per-bit or so. Almost 30 bits are still free
for future extensions.
We could've defined only new flags here or only the ones we may need
to alter, but checking some flags in one place while others in another
doesn't sound convenient or intuitive. ::flags passed by the driver can
now go to the "slow" PP params.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link[0]: https://lore.kernel.org/netdev/20230703133207.4f0c54ce@kernel.org
Suggested-by: Alexander Duyck <alexanderduyck@fb.com>
Link[1]: https://lore.kernel.org/netdev/CAKgT0UfZCGnWgOH96E4GV3ZP6LLbROHM7SHE8NKwq+exX+Gk_Q@mail.gmail.com
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
After commit 5027ec19f1 ("net: page_pool: split the page_pool_params
into fast and slow") that made &page_pool contain only "hot" params at
the start, cacheline boundary chops frag API fields group in the middle
again.
To not bother with this each time fast params get expanded or shrunk,
let's just align them to `4 * sizeof(long)`, the closest upper pow-2 to
their actual size (2 longs + 1 int). This ensures 16-byte alignment for
the 32-bit architectures and 32-byte alignment for the 64-bit ones,
excluding unnecessary false-sharing.
::page_state_hold_cnt is used quite intensively on hotpath no matter if
frag API is used, so move it to the newly created hole in the first
cacheline.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=QiGZ
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-05-03
1) Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support.
This was defined by an early version of an IETF draft
that did not make it to a standard.
2) Introduce direction attribute for xfrm states.
xfrm states have a direction, a stsate can be used
either for input or output packet processing.
Add a direction to xfrm states to make it clear
for what a xfrm state is used.
* tag 'ipsec-next-2024-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Restrict SA direction attribute to specific netlink message types
xfrm: Add dir validation to "in" data path lookup
xfrm: Add dir validation to "out" data path lookup
xfrm: Add Direction to the SA in or out
udpencap: Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support
====================
Link: https://lore.kernel.org/r/20240503082732.2835810-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently GTP packets are dropped if the next extension field is set to
non-zero value, but this are valid GTP packets.
TS 29.281 provides a longer header format, which is defined as struct
gtp1_header_long. Such long header format is used if any of the S, PN, E
flags is set.
This long header is 4 bytes longer than struct gtp1_header, plus
variable length (optional) extension headers. The next extension header
field is zero is no extension header is provided.
The extension header is composed of a length field which includes total
number of 4 byte words including the extension header itself (1 byte),
payload (variable length) and next type (1 byte). The extension header
size and its payload is aligned to 4 bytes.
A GTP packet might come with a chain extensions headers, which makes it
slightly cumbersome to parse because the extension next header field
comes at the end of the extension header, and there is a need to check
if this field becomes zero to stop the extension header parser.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull the code out of tcp_gro_receive in order to access the tcp header
from tcp4/6_gro_receive.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This pulls the flow port matching out of tcp_gro_receive, so that it can be
reused for the next change, which adds the TCP fraglist GRO heuristic.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This helper function will be used for TCP fraglist GRO support
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This API enables the net stack to reset the queues used for devmem TCP.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=aeD1
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2024-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-05-02
1) Fix an error pointer dereference in xfrm_in_fwd_icmp.
From Antony Antony.
2) Preserve vlan tags for ESP transport mode software GRO.
From Paul Davey.
3) Fix a spelling mistake in an uapi xfrm.h comment.
From Anotny Antony.
* tag 'ipsec-2024-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Correct spelling mistake in xfrm.h comment
xfrm: Preserve vlan tags for transport mode software GRO
xfrm: fix possible derferencing in error path
====================
Link: https://lore.kernel.org/r/20240502084838.2269355-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Avoid a buffer overflow when traversing the ctl_table by ensuring that
AX25_MAX_VALUES is the same as the size of ax25_param_table. This is
done with a BUILD_BUG_ON where ax25_param_table is defined and a
CONFIG_AX25_DAMA_SLAVE guard in the unnamed enum definition as well as
in the ax25_dev_device_up and ax25_ds_set_timer functions.
The overflow happened when the sentinel was removed from
ax25_param_table. The sentinel's data element was changed when
CONFIG_AX25_DAMA_SLAVE was undefined. This had no adverse effects as it
still stopped on the sentinel's null procname but needed to be addressed
once the sentinel was removed.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, during color change, no link id information is passed down.
In order to support color change during Multi Link Operation, it is
required to pass link id as well.
Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240422053412.2024075-2-quic_adisi@quicinc.com
Link: https://msgid.link/20240422053412.2024075-3-quic_adisi@quicinc.com
[squash, actually only pass 0 from mac80211]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch adds two new arguments for cong_control of struct
tcp_congestion_ops:
- ack
- flag
These two arguments are inherited from the caller tcp_cong_control in
tcp_intput.c. One use case of them is to update cwnd and pacing rate
inside cong_control based on the info they provide. For example, the
flag can be used to decide if it is the right time to raise or reduce a
sender's cwnd.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Miao Xu <miaxu@meta.com>
Link: https://lore.kernel.org/r/20240502042318.801932-2-miaxu@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a ("bpf: verifier: prevent userspace memory access")
d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.
This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.
This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.
To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.
Reproduction example:
Endpoint configuration example (fou + local address bind)
# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1
Netperf TCP_STREAM result on net-next before patch is applied:
net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.28 2.37
net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2745.06
patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2877.38
Fixes: a6024562ff ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we no longer any drivers using PHYLIB's adjust_link callback,
remove all paths that made use of adjust_link as well as the associated
functions.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240430164816.2400606-3-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not had a switch driver use a fixed_link_update callback since
58d56fcc39 ("net: dsa: bcm_sf2: Get rid of
PHYLIB functions") remove this callback.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240430164816.2400606-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the helpers for the new write code in 9p. There's now an
optional ->prepare_write() that allows the filesystem to set the parameters
for the next write, such as maximum size and maximum segment count, and an
->issue_write() that is called to initiate an (asynchronous) write
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
This patch introduces the 'dir' attribute, 'in' or 'out', to the
xfrm_state, SA, enhancing usability by delineating the scope of values
based on direction. An input SA will restrict values pertinent to input,
effectively segregating them from output-related values.
And an output SA will restrict attributes for output. This change aims
to streamline the configuration process and improve the overall
consistency of SA attributes during configuration.
This feature sets the groundwork for future patches, including
the upcoming IP-TFS patch.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
sysctl_mem_pcpu_rsv is used in TCP fast path,
move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move some proto memory definitions out of <net/sock.h>
Very few files need them, and following patch
will include <net/hotdata.h> from <net/proto_memory.h>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_out_of_memory() has a single caller: tcp_check_oom().
Following patch will also make sk_memory_allocated()
not anymore visible from <net/sock.h> and <net/tcp.h>
Add const qualifier to sock argument of tcp_out_of_memory()
and tcp_check_oom().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysctl_skb_defer_max is used in TCP fast path,
move it to net_hodata.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysctl_max_skb_frags is used in TCP and MPTCP fast paths,
move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I added dst_rt6_info() in commit
e8dfd42c17 ("ipv6: introduce dst_rt6_info() helper")
This patch does a similar change for IPv4.
Instead of (struct rtable *)dst casts, we can use :
#define dst_rtable(_ptr) \
container_of_const(_ptr, struct rtable, dst)
Patch is smaller than IPv6 one, because IPv4 has skb_rtable() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240429133009.1227754-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some scenarios using Emulated-ISM device, sndbuf can share the same
physical memory region with peer DMB to avoid data copy from one side
to the other. In such case the sndbuf is only a descriptor that
describes the shared memory and does not actually occupy memory, it's
more like a ghost buffer.
+----------+ +----------+
| socket A | | socket B |
+----------+ +----------+
| |
+--------+ +--------+
| sndbuf | | DMB |
| desc | | desc |
+--------+ +--------+
| |
| +----v-----+
+--------------------------> memory |
+----------+
So here introduces three new SMC-D device operations to check if this
feature is supported by device, and to {attach|detach} ghost sndbuf to
peer DMB. For now only loopback-ism supports this.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some operations are not supported by new introduced Emulated-ISM, so
mark them as optional and check if the device supports them when called.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The struct 'ism_client' is specialized for s390 platform firmware ISM.
So replace it with 'void' to make SMCD DMB registration helper generic
for both Emulated-ISM and existing ISM.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZi9+AAAKCRDbK58LschI
g0nEAP487m7L0nLVriC2oIOWsi29tklW3etm6DO7gmGRGIHgrgEAnMyV1xBj3bGj
v6jJwDcybCym1hLx+1x1JCZ4eoAFswE=
=xbna
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a followup of commit c4e86b4363 ("net: add two more
call_rcu_hurry()")
fib6_info_destroy_rcu() is calling nexthop_put() or fib6_nh_release()
We must not delay it too much or risk unregister_netdevice/ref_tracker
traces because references to netdev are not released in time.
This should speedup device/netns dismantles when CONFIG_RCU_LAZY=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the dropreason logic to show the exact reason of tcp reset,
so we can finally display the corresponding item in enum sk_reset_reason
instead of reinventing new reset reasons. This patch replaces all
the prior NOT_SPECIFIED reasons.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Like what we did to passive reset:
only passing possible reset reason in each active reset path.
No functional changes.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adjust the parameter and support passing reason of reset which
is for now NOT_SPECIFIED. No functional changes.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a new standalone file for the easy future extension to support
both active reset and passive reset in the TCP/DCCP/MPTCP protocols.
This patch only does the preparations for reset reason mechanism,
nothing else changes.
The reset reasons are divided into three parts:
1) reuse drop reasons for passive reset in TCP
2) our own independent reasons which aren't relying on other reasons at all
3) reuse MP_TCPRST option for MPTCP
The benefits of a standalone reset reason are listed here:
1) it can cover more than one case, such as reset reasons in MPTCP,
active reset reasons.
2) people can easily/fastly understand and maintain this mechanism.
3) we get unified format of output with prefix stripped.
4) more new reset reasons are on the way
...
I will implement the basic codes of active/passive reset reason in
those three protocols, which are not complete for this moment. For
passive reset part in TCP, I only introduce the NO_SOCKET common case
which could be set as an example.
After this series applied, it will have the ability to open a new
gate to let other people contribute more reasons into it :)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xiumei and Christoph reported the following lockdep splat, complaining of
the qdisc root lock being taken twice:
============================================
WARNING: possible recursive locking detected
6.7.0-rc3+ #598 Not tainted
--------------------------------------------
swapper/2/0 is trying to acquire lock:
ffff888177190110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
but task is already holding lock:
ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&sch->q.lock);
lock(&sch->q.lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by swapper/2/0:
#0: ffff888135a09d98 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x11a/0x510
#1: ffffffffaaee5260 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x2c0/0x1ed0
#2: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
#3: ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
#4: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
stack backtrace:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.7.0-rc3+ #598
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x4a/0x80
__lock_acquire+0xfdd/0x3150
lock_acquire+0x1ca/0x540
_raw_spin_lock+0x34/0x80
__dev_queue_xmit+0x1560/0x2e70
tcf_mirred_act+0x82e/0x1260 [act_mirred]
tcf_action_exec+0x161/0x480
tcf_classify+0x689/0x1170
prio_enqueue+0x316/0x660 [sch_prio]
dev_qdisc_enqueue+0x46/0x220
__dev_queue_xmit+0x1615/0x2e70
ip_finish_output2+0x1218/0x1ed0
__ip_finish_output+0x8b3/0x1350
ip_output+0x163/0x4e0
igmp_ifc_timer_expire+0x44b/0x930
call_timer_fn+0x1a2/0x510
run_timer_softirq+0x54d/0x11a0
__do_softirq+0x1b3/0x88f
irq_exit_rcu+0x18f/0x1e0
sysvec_apic_timer_interrupt+0x6f/0x90
</IRQ>
This happens when TC does a mirred egress redirect from the root qdisc of
device A to the root qdisc of device B. As long as these two locks aren't
protecting the same qdisc, they can be acquired in chain: add a per-qdisc
lockdep key to silence false warnings.
This dynamic key should safely replace the static key we have in sch_htb:
it was added to allow enqueueing to the device "direct qdisc" while still
holding the qdisc root lock.
v2: don't use static keys anymore in HTB direct qdiscs (thanks Eric Dumazet)
CC: Maxim Mikityanskiy <maxim@isovalent.com>
CC: Xiumei Mu <xmu@redhat.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/451
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7dc06d6158f72053cf877a82e2a7a5bd23692faa.1713448007.git.dcaratti@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The software GRO path for esp transport mode uses skb_mac_header_rebuild
prior to re-injecting the packet via the xfrm_napi_dev. This only
copies skb->mac_len bytes of header which may not be sufficient if the
packet contains 802.1Q tags or other VLAN tags. Worse copying only the
initial header will leave a packet marked as being VLAN tagged but
without the corresponding tag leading to mangling when it is later
untagged.
The VLAN tags are important when receiving the decrypted esp transport
mode packet after GRO processing to ensure it is received on the correct
interface.
Therefore record the full mac header length in xfrm*_transport_input for
later use in corresponding xfrm*_transport_finish to copy the entire mac
header when rebuilding the mac header for GRO. The skb->data pointer is
left pointing skb->mac_header bytes after the start of the mac header as
is expected by the network stack and network and transport header
offsets reset to this location.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Main goal of memory allocation profiling patchset is to provide accounting
that is cheap enough to run in production. To achieve that we inject
counters using codetags at the allocation call sites to account every time
allocation is made. This injection allows us to perform accounting
efficiently because injected counters are immediately available as opposed
to the alternative methods, such as using _RET_IP_, which would require
counter lookup and appropriate locking that makes accounting much more
expensive. This method requires all allocation functions to inject
separate counters at their call sites so that their callers can be
individually accounted. Counter injection is implemented by allocation
hooks which should wrap all allocation functions.
Inlined functions which perform allocations but do not use allocation
hooks are directly charged for the allocations they perform. In most
cases these functions are just specialized allocation wrappers used from
multiple places to allocate objects of a specific type. It would be more
useful to do the accounting at their call sites instead. Instrument these
helpers to do accounting at the call site. Simple inlined allocation
wrappers are converted directly into macros. More complex allocators or
allocators with documentation are converted into _noprof versions and
allocation hooks are added. This allows memory allocation profiling
mechanism to charge allocations to the callers of these functions.
Link: https://lkml.kernel.org/r/20240415020731.1152108-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Jan Kara <jack@suse.cz> [jbd2]
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tony Nguyen says:
====================
net: intel: start The Great Code Dedup + Page Pool for iavf
Alexander Lobakin says:
Here's a two-shot: introduce {,Intel} Ethernet common library (libeth and
libie) and switch iavf to Page Pool. Details are in the commit messages;
here's a summary:
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules. Before introducing new changes, which would need to be
copied over again, start decoupling the already existing duplicate
functionality into a new module, which will be shared between several
Intel Ethernet drivers. The first name that came to my mind was
"libie" -- "Intel Ethernet common library". Also this sounds like
"lovelie" (-> one word, no "lib I E" pls) and can be expanded as
"lib Internet Explorer" :P
The "generic", pure-software part is placed separately, so that it can be
easily reused in any driver by any vendor without linking to the Intel
pre-200G guts. In a few words, it's something any modern driver does the
same way, but nobody moved it level up (yet).
The series is only the beginning. From now on, adding every new feature
or doing any good driver refactoring will remove much more lines than add
for quite some time. There's a basic roadmap with some deduplications
planned already, not speaking of that touching every line now asks:
"can I share this?". The final destination is very ambitious: have only
one unified driver for at least i40e, ice, iavf, and idpf with a struct
ops for each generation. That's never gonna happen, right? But you still
can at least try.
PP conversion for iavf lands within the same series as these two are tied
closely. libie will support Page Pool model only, so that a driver can't
use much of the lib until it's converted. iavf is only the example, the
rest will eventually be converted soon on a per-driver basis. That is
when it gets really interesting. Stay tech.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
MAINTAINERS: add entry for libeth and libie
iavf: switch to Page Pool
iavf: pack iavf_ring more efficiently
libeth: add Rx buffer management
page_pool: add DMA-sync-for-CPU inline helper
page_pool: constify some read-only function arguments
slab: introduce kvmalloc_array_node() and kvcalloc_node()
iavf: drop page splitting and recycling
iavf: kill "legacy-rx" for good
net: intel: introduce {, Intel} Ethernet common library
====================
Link: https://lore.kernel.org/r/20240424203559.3420468-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two important arguments in RTT estimation, mrtt and srtt, are passed to
tcp_bpf_rtt(), so that bpf programs get more information about RTT
computation in BPF_SOCK_OPS_RTT_CB.
The difference between bpf_sock_ops->srtt_us and the srtt here is: the
former is an old rtt before update, while srtt passed by tcp_bpf_rtt()
is that after update.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240425161724.73707-2-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The second "new features" pull request for v6.10 with changes both in
stack and in drivers. This time the pull request is rather small and
nothing special standing out except maybe that we have several
kernel-doc fixes. Great to see that we are getting warning free
wireless code (until new warnings are added).
Do note that this pull request has a simple conflict in mac80211 with
net tree, here's an example conflict resolution:
https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/
Major changes:
rtl8xxxu:
* enable Management Frame Protection (MFP) support
rtw88:
* disable unsupported interface type of mesh point for all chips, and only
support station mode for SDIO chips.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYo194RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvS4Qf/VgymhfRmZ3UfqQiL9uu806ol3tBOnhAG
zGo//wBVVgdOEWZhVtW2aVvPH1pGRnocxWZG8/G0zx4N3YaMtDocV8X3gRp8JpGI
Gk4Atc7J6Eyyp+Csxz2HvG0BwvkcEt65GwBpE2PmrEukMByS29EzjUppUZISlBKM
7e3rqKbLMVPueIoKfTImpWGJVdYOCvErbqZakcXV97eQw3wOb/NLIOBAPobrx8oS
cNdtLhEHwZzAtwYWL7VzU6HBsmBMpSCBl08Pobq8esH82x6yCoHVmyQlb7SS+iZ1
klffYjoPT0fWUAMjHJdM26KJ77GXOHtphxmTeS5xnrq/+AhPDJmdNg==
=0Ijq
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The second "new features" pull request for v6.10 with changes both in
stack and in drivers. This time the pull request is rather small and
nothing special standing out except maybe that we have several
kernel-doc fixes. Great to see that we are getting warning free
wireless code (until new warnings are added).
Major changes:
rtl8xxxu:
* enable Management Frame Protection (MFP) support
rtw88:
* disable unsupported interface type of mesh point for all chips, and only
support station mode for SDIO chips.
* tag 'wireless-next-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (63 commits)
wifi: mac80211: handle link ID during management Tx
wifi: mac80211: handle sdata->u.ap.active flag with MLO
wifi: cfg80211: add return docs for regulatory functions
wifi: cfg80211: make some regulatory functions void
wifi: mac80211: add return docs for sta_info_flush()
wifi: mac80211: keep mac80211 consistent on link activation failure
wifi: mac80211: simplify ieee80211_assign_link_chanctx()
wifi: mac80211: reserve chanctx during find
wifi: cfg80211: fix cfg80211 function kernel-doc
wifi: mac80211_hwsim: Use wider regulatory for custom for 6GHz tests
wifi: iwlwifi: mvm: Don't allow EMLSR when the RSSI is low
wifi: iwlwifi: mvm: disable EMLSR when we suspend with wowlan
wifi: iwlwifi: mvm: get periodic statistics in EMLSR
wifi: iwlwifi: mvm: don't recompute EMLSR mode in can_activate_links
wifi: iwlwifi: mvm: implement EMLSR prevention mechanism.
wifi: iwlwifi: mvm: exit EMLSR upon missed beacon
wifi: iwlwifi: mvm: init vif works only once
wifi: iwlwifi: mvm: Add helper functions to update EMLSR status
wifi: iwlwifi: mvm: Implement new link selection algorithm
wifi: iwlwifi: mvm: move EMLSR/links code
...
====================
Link: https://lore.kernel.org/r/20240424100122.217AEC113CE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_sk_poll is called without locking the socket, and needs to read
strp->msg_ready (via tls_strp_msg_ready). Convert msg_ready to a bool
and use READ_ONCE/WRITE_ONCE where needed. The remaining reads are
only performed when the socket is locked.
Fixes: 121dca784f ("tls: suppress wakeups unless we have a full record")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/0b7ee062319037cf86af6b317b3d72f7bfcd2e97.1713797701.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cannot know whether a Rx skb missing md_dst is intended for MACsec or not
without knowing whether the device is able to update this field during an
offload. Assume that an offload to a MACsec device cannot support updating
md_dst by default. Capable devices can advertise that they do indicate that
an skb is related to a MACsec offloaded packet using the md_dst.
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: stable@vger.kernel.org
Fixes: 860ead89b8 ("net/macsec: Add MACsec skb_metadata_dst Rx Data path support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240423181319.115860-2-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* ath11k: convert to correct RCU iteration of IPv6 addresses
* iwlwifi: link ID, FW API version, scanning and PASN fixes
* cfg80211: NULL-deref and tracing fixes
* mac80211: connection mode, mesh fast-TX, multi-link and
various other small fixes
-----BEGIN PGP SIGNATURE-----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=dPas
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-04-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
Fixes for the current cycle:
* ath11k: convert to correct RCU iteration of IPv6 addresses
* iwlwifi: link ID, FW API version, scanning and PASN fixes
* cfg80211: NULL-deref and tracing fixes
* mac80211: connection mode, mesh fast-TX, multi-link and
various other small fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the flag definitions for tcp_skb_cb->sacked into a new enum named
tcp_skb_cb_sacked_flags, then we can get access to them in bpf via
vmlinux.h, e.g., in tracepoints.
This patch does not change any existing functionality.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code shall always check if HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE has
been set before attempting to use HCI_OP_READ_ENC_KEY_SIZE.
Fixes: c569242cd4 ("Bluetooth: hci_event: set the conn encrypted before conn establishes")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The extended advertising reports do report the PHYs so this store then
in hci_conn so it can be later used in hci_le_ext_create_conn_sync to
narrow the PHYs to be scanned since the controller will also perform a
scan having a smaller set of PHYs shall reduce the time it takes to
find and connect peers.
Fixes: 288c90224e ("Bluetooth: Enable all supported LE PHY by default")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a couple intuitive helpers to hide Rx buffer implementation details
in the library and not multiplicate it between drivers. The settings are
sorta optimized for 100G+ NICs, but nothing really HW-specific here.
Use the new page_pool_dev_alloc() to dynamically switch between
split-page and full-page modes depending on MTU, page size, required
headroom etc. For example, on x86_64 with the default driver settings
each page is shared between 2 buffers. Turning on XDP (not in this
series) -> increasing headroom requirement pushes truesize out of 2048
boundary, leading to that each buffer starts getting a full page.
The "ceiling" limit is %PAGE_SIZE, as only order-0 pages are used to
avoid compound overhead. For the above architecture, this means maximum
linear frame size of 3712 w/o XDP.
Not that &libeth_buf_queue is not a complete queue/ring structure for
now, rather a shim, but eventually the libeth-enabled drivers will move
to it, with iavf being the first one.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Each driver is responsible for syncing buffers written by HW for CPU
before accessing them. Almost each PP-enabled driver uses the same
pattern, which could be shorthanded into a static inline to make driver
code a little bit more compact.
Introduce a simple helper which performs DMA synchronization for the
size passed from the driver. It can be used even when the pool doesn't
manage DMA-syncs-for-device, just make sure the page has a correct DMA
address set via page_pool_set_dma_addr().
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There are several functions taking pointers to data they don't modify.
This includes statistics fetching, page and page_pool parameters, etc.
Constify the pointers, so that call sites will be able to pass const
pointers as well.
No functional changes, no visible changes in functions sizes.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules.
Before introducing new changes, which would need to be copied over again,
start decoupling the already existing duplicate functionality into a new
module, which will be shared between several Intel Ethernet drivers.
Add the lookup table which converts 8/10-bit hardware packet type into
a parsed bitfield structure for easy checking packet format parameters,
such as payload level, IP version, etc. This is currently used by i40e,
ice and iavf and it's all the same in all three drivers.
The only difference introduced in this implementation is that instead of
defining a 256 (or 1024 in case of ice) element array, add unlikely()
condition to limit the input to 154 (current maximum non-reserved packet
type). There's no reason to waste 600 (or even 3600) bytes only to not
hurt very unlikely exception packets.
The hash computation function now takes payload level directly as a
pkt_hash_type. There's a couple cases when non-IP ptypes are marked as
L3 payload and in the previous versions their hash level would be 2, not
3. But skb_set_hash() only sees difference between L4 and non-L4, thus
this won't change anything at all.
The module is behind the hidden Kconfig symbol, which the drivers will
select when needed. The exports are behind 'LIBIE' namespace to limit
the scope of the functions.
Not that non-HW-specific symbols will live in yet another module,
libeth. This is done to easily distinguish pretty generic code ready
for reusing by any other vendor and/or for moving the layer up from
the code useful in Intel's 1-100G drivers only.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jonathan Heathcote reported a regression caused by blamed commit
on aarch64 architecture.
x86 happens to have irq-safe __this_cpu_add_return()
and __this_cpu_sub(), but this is not generic.
I think my confusion came from "struct sock" argument,
because these helpers are called with a locked socket.
But the memory accounting is per-proto (and per-cpu after
the blamed commit). We might cleanup these helpers later
to directly accept a "struct proto *proto" argument.
Switch to this_cpu_add_return() and this_cpu_xchg()
operations, and get rid of preempt_disable()/preempt_enable() pairs.
Fast path becomes a bit faster as a result :)
Many thanks to Jonathan Heathcote for his awesome report and
investigations.
Fixes: 3cd3399dd7 ("net: implement per-cpu reserves for memory_allocated")
Reported-by: Jonathan Heathcote <jonathan.heathcote@bbc.co.uk>
Closes: https://lore.kernel.org/netdev/VI1PR01MB42407D7947B2EA448F1E04EFD10D2@VI1PR01MB4240.eurprd01.prod.exchangelabs.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/r/20240421175248.1692552-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend devlink_param *set function pointer to take extack as a param.
Sometimes it is needed to pass information to the end user from set
function. It is more proper to use for that netlink instead of passing
message to dmesg.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Instead of relying on RTNL, choke_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in choke_change().
v2: added a WRITE_ONCE(p->Scell_log, Scell_log)
per Simon feedback in V1
Removed the READ_ONCE(q->limit) in choke_enqueue()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Running "scripts/kernel-doc -Wall -Werror -none include/net/cfg80211.h"
produces many warnings of the form "warning: No description found for
return value of <function>", so make sure all of them have a Return:
clause. In some instances also add a Context: clause.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240417-cfg80211-kdoc-v1-1-d54cb7143417@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the mirred action is used on a classful egress qdisc and a packet is
mirrored or redirected to self we hit a qdisc lock deadlock.
See trace below.
[..... other info removed for brevity....]
[ 82.890906]
[ 82.890906] ============================================
[ 82.890906] WARNING: possible recursive locking detected
[ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W
[ 82.890906] --------------------------------------------
[ 82.890906] ping/418 is trying to acquire lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] but task is already holding lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] other info that might help us debug this:
[ 82.890906] Possible unsafe locking scenario:
[ 82.890906]
[ 82.890906] CPU0
[ 82.890906] ----
[ 82.890906] lock(&sch->q.lock);
[ 82.890906] lock(&sch->q.lock);
[ 82.890906]
[ 82.890906] *** DEADLOCK ***
[ 82.890906]
[..... other info removed for brevity....]
Example setup (eth0->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
Another example(eth0->eth1->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth1
tc qdisc add dev eth1 root handle 1: htb default 30
tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
We fix this by adding an owner field (CPU id) to struct Qdisc set after
root qdisc is entered. When the softirq enters it a second time, if the
qdisc owner is the same CPU, the packet is dropped to break the loop.
Reported-by: Mingshuai Ren <renmingshuai@huawei.com>
Closes: https://lore.kernel.org/netdev/20240314111713.5979-1-renmingshuai@huawei.com/
Fixes: 3bcb846ca4 ("net: get rid of spin_trylock() in net_tx_action()")
Fixes: e578d9c025 ("net: sched: use counter to break reclassify loops")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240415210728.36949-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit dcf70df204 ("af_unix: Fix up unix_edge.successor for embryo
socket.") added spin_lock(&unix_gc_lock) in accept() path, and it
caused regression in a stress test as reported by kernel test robot.
If the embryo socket is not part of the inflight graph, we need not
hold the lock.
To decide that in O(1) time and avoid the regression in the normal
use case,
1. add a new stat unix_sk(sk)->scm_stat.nr_unix_fds
2. count the number of inflight AF_UNIX sockets in the receive
queue under unix_state_lock()
3. move unix_update_edges() call under unix_state_lock()
4. avoid locking if nr_unix_fds is 0 in unix_update_edges()
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404101427.92a08551-oliver.sang@intel.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240413021928.20946-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These helpers aim to help drivers, with checking
for the presence of unsupported control flags.
For drivers supporting at least one control flag:
flow_rule_is_supp_control_flags()
For drivers using flow_rule_match_control(), but not using flags:
flow_rule_has_control_flags()
For drivers not using flow_rule_match_control():
flow_rule_match_has_control_flags()
While primarily aimed at FLOW_DISSECTOR_KEY_CONTROL
and flow_rule_match_control(), then the first two
can also be used with FLOW_DISSECTOR_KEY_ENC_CONTROL
and flow_rule_match_enc_control().
These helpers mirrors the existing check done in sfc:
drivers/net/ethernet/sfc/tc.c +276
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=tl4K
-----END PGP SIGNATURE-----
Merge tag 'nf-24-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
netfilter pull request 24-04-11
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patches #1 and #2 add missing rcu read side lock when iterating over
expression and object type list which could race with module removal.
Patch #3 prevents promisc packet from visiting the bridge/input hook
to amend a recent fix to address conntrack confirmation race
in br_netfilter and nf_conntrack_bridge.
Patch #4 adds and uses iterate decorator type to fetch the current
pipapo set backend datastructure view when netlink dumps the
set elements.
Patch #5 fixes removal of duplicate elements in the pipapo set backend.
Patch #6 flowtable validates pppoe header before accessing it.
Patch #7 fixes flowtable datapath for pppoe packets, otherwise lookup
fails and pppoe packets follow classic path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add definition and documentation for the new generic
info "board.part_number".
The new one is for part number specific use, and board.id
is modified to match the documentation in devlink-info.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale"),
we noticed an application-level timeout due to reduced throughput.
Before the commit, for a client that sets SO_RCVBUF to 65k, it takes
around 22 seconds to transfer 10M data. After the commit, it takes 40
seconds. Because our application has a 30-second timeout, this
regression broke the application.
The reason that it takes longer to transfer data is that
tp->scaling_ratio is initialized to a value that results in ~0.25 of
rcvbuf. In our case, SO_RCVBUF is set to 65536 by the application, which
translates to 2 * 65536 = 131,072 bytes in rcvbuf and hence a ~28k
initial receive window.
Later, even though the scaling_ratio is updated to a more accurate
skb->len/skb->truesize, which is ~0.66 in our environment, the window
stays at ~0.25 * rcvbuf. This is because tp->window_clamp does not
change together with the tp->scaling_ratio update when autotuning is
disabled due to SO_RCVBUF. As a result, the window size is capped at the
initial window_clamp, which is also ~0.25 * rcvbuf, and never grows
bigger.
Most modern applications let the kernel do autotuning, and benefit from
the increased scaling_ratio. But there are applications such as kafka
that has a default setting of SO_RCVBUF=64k.
This patch increases the initial scaling_ratio from ~25% to 50% in order
to make it backward compatible with the original default
sysctl_tcp_adv_win_scale for applications setting SO_RCVBUF.
Fixes: dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale")
Signed-off-by: Hechao Li <hli@netflix.com>
Reviewed-by: Tycho Andersen <tycho@tycho.pizza>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/20240402215405.432863-1-hli@netflix.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
Rather than having a shim for each and every phylink MAC operation,
allow DSA switch drivers to provide their own ops structure. When a
DSA driver provides the phylink MAC operations, the shimmed ops must
not be provided, so fail an attempt to register a switch with both
the phylink_mac_ops in struct dsa_switch and the phylink_mac_*
operations populated in dsa_switch_ops populated.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rudqF-006K9H-Cc@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We convert from a phylink_config struct to a dsa_port struct in many
places, let's provide a helper for this.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1rudqA-006K9B-85@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTO_ONLINK was a flag used in ->flowi4_tos that allowed to alter the
scope of an IPv4 route lookup. Setting this flag was equivalent to
specifying RT_SCOPE_LINK in ->flowi4_scope.
With commit ec20b28300 ("ipv4: Set scope explicitly in
ip_route_output()."), the last users of RTO_ONLINK have been removed.
Therefore, we can now drop the code that checked this bit and stop
modifying ->flowi4_scope in ip_route_output_key_hash().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/57de760565cab55df7b129f523530ac6475865b2.1712754146.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
include/net/flow_offload.h:351: warning:
No description found for return value of 'flow_offload_has_one_action'
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20240410114718.15145-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Erick Archer says:
====================
mana: Add flex array to struct mana_cfg_rx_steer_req_v2 (part)
The "struct mana_cfg_rx_steer_req_v2" uses a dynamically sized set of
trailing elements. Specifically, it uses a "mana_handle_t" array. So,
use the preferred way in the kernel declaring a flexible array [1].
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions).
Also, avoid the open-coded arithmetic in the memory allocator functions
[2] using the "struct_size" macro.
Moreover, use the "offsetof" helper to get the indirect table offset
instead of the "sizeof" operator and avoid the open-coded arithmetic in
pointers using the new flex member. This new structure member also allow
us to remove the "req_indir_tab" variable since it is no longer needed.
Now, it is also possible to use the "flex_array_size" helper to compute
the size of these trailing elements in the "memcpy" function.
Specifically, the first commit adds the flex member and the patches 2 and
3 refactor the consumers of the "struct mana_cfg_rx_steer_req_v2".
This code was detected with the help of Coccinelle, and audited and
modified manually. The Coccinelle script used to detect this code pattern
is the following:
virtual report
@rule1@
type t1;
type t2;
identifier i0;
identifier i1;
identifier i2;
identifier ALLOC =~ "kmalloc|kzalloc|kmalloc_node|kzalloc_node|vmalloc|vzalloc|kvmalloc|kvzalloc";
position p1;
@@
i0 = sizeof(t1) + sizeof(t2) * i1;
...
i2 = ALLOC@p1(..., i0, ...);
@script:python depends on report@
p1 << rule1.p1;
@@
msg = "WARNING: verify allocation on line %s" % (p1[0].line)
coccilib.report.print_report(p1[0],msg)
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-and-one-element-arrays [1]
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [2]
v1: https://lore.kernel.org/linux-hardening/AS8PR02MB7237974EF1B9BAFA618166C38B382@AS8PR02MB7237.eurprd02.prod.outlook.com/
v2: https://lore.kernel.org/linux-hardening/AS8PR02MB723729C5A63F24C312FC9CD18B3F2@AS8PR02MB7237.eurprd02.prod.outlook.com/
====================
Link: https://lore.kernel.org/r/AS8PR02MB72374BD1B23728F2E3C3B1A18B022@AS8PR02MB7237.eurprd02.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "struct mana_cfg_rx_steer_req_v2" uses a dynamically sized set of
trailing elements. Specifically, it uses a "mana_handle_t" array. So,
use the preferred way in the kernel declaring a flexible array [1].
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions).
This is a previous step to refactor the two consumers of this structure.
drivers/infiniband/hw/mana/qp.c
drivers/net/ethernet/microsoft/mana/mana_en.c
The ultimate goal is to avoid the open-coded arithmetic in the memory
allocator functions [2] using the "struct_size" macro.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-and-one-element-arrays [1]
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [2]
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB7237E2900247571C9CB84C678B022@AS8PR02MB7237.eurprd02.prod.outlook.com
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Ensure there is sufficient room to access the protocol field of the
PPPoe header. Validate it once before the flowtable lookup, then use a
helper function to access protocol field.
Reported-by: syzbot+b6f07e1c07ef40199081@syzkaller.appspotmail.com
Fixes: 72efd585f7 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The generation mask can be updated while netlink dump is in progress.
The pipapo set backend walk iterator cannot rely on it to infer what
view of the datastructure is to be used. Add notation to specify if user
wants to read/update the set.
Based on patch from Florian Westphal.
Fixes: 2b84e215f8 ("netfilter: nft_set_pipapo: .walk does not deal with generations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a487 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d51 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a6 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
TCP can transform a TIMEWAIT socket into a SYN_RECV one from
a SYN packet, and the ISN of the SYNACK packet is normally
generated using TIMEWAIT tw_snd_nxt :
tcp_timewait_state_process()
...
u32 isn = tcptw->tw_snd_nxt + 65535 + 2;
if (isn == 0)
isn++;
TCP_SKB_CB(skb)->tcp_tw_isn = isn;
return TCP_TW_SYN;
This SYN packet also bypasses normal checks against listen queue
being full or not.
tcp_conn_request()
...
__u32 isn = TCP_SKB_CB(skb)->tcp_tw_isn;
...
/* TW buckets are converted to open requests without
* limitations, they conserve resources and peer is
* evidently real one.
*/
if ((syncookies == 2 || inet_csk_reqsk_queue_is_full(sk)) && !isn) {
want_cookie = tcp_syn_flood_action(sk, rsk_ops->slab_name);
if (!want_cookie)
goto drop;
}
This was using TCP_SKB_CB(skb)->tcp_tw_isn field in skb.
Unfortunately this field has been accidentally cleared
after the call to tcp_timewait_state_process() returning
TCP_TW_SYN.
Using a field in TCP_SKB_CB(skb) for a temporary state
is overkill.
Switch instead to a per-cpu variable.
As a bonus, we do not have to clear tcp_tw_isn in TCP receive
fast path.
It is temporarily set then cleared only in the TCP_TW_SYN dance.
Fixes: 4ad19de877 ("net: tcp6: fix double call of tcp_v6_fill_cb()")
Fixes: eeea10b83a ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcp_v6_init_req() reads TCP_SKB_CB(skb)->tcp_tw_isn to find
out if the request socket is created by a SYN hitting a TIMEWAIT socket.
This has been buggy for a decade, lets directly pass the information
from tcp_conn_request().
This is a preparatory patch to make the following one easier to review.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend the flag IEEE80211_KEY_FLAG_GENERATE_MMIE to BIP-CMAC-256,
BIP-GMAC-128 and BIP-GMAC-256 for the same reason and in the same
way that the flag was added originally in commit a0b4496a43
("mac80211: add IEEE80211_KEY_FLAG_GENERATE_MMIE to ieee80211_key_flags").
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://msgid.link/20240326003036.15215-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
kernel-doc is reporting some warnings, so fix them:
% scripts/kernel-doc -Wall -Werror -none include/net/mac80211.h
include/net/mac80211.h:2056: warning: No description found for return value of 'wdev_to_ieee80211_vif'
include/net/mac80211.h:2066: warning: No description found for return value of 'ieee80211_vif_to_wdev'
include/net/mac80211.h:5603: warning: No description found for return value of 'ieee80211_beacon_cntdwn_is_complete'
include/net/mac80211.h:5968: warning: No description found for return value of 'ieee80211_gtk_rekey_add'
include/net/mac80211.h:6350: warning: No description found for return value of 'ieee80211_find_sta_by_link_addrs'
include/net/mac80211.h:6478: warning: No description found for return value of 'ieee80211_txq_airtime_check'
include/net/mac80211.h:6981: warning: No description found for return value of 'rate_control_set_rates'
include/net/mac80211.h:7142: warning: No description found for return value of 'ieee80211_tx_prepare_skb'
include/net/mac80211.h:7156: warning: No description found for return value of 'ieee80211_parse_tx_radiotap'
include/net/mac80211.h:7277: warning: No description found for return value of 'ieee80211_tx_dequeue'
include/net/mac80211.h:7292: warning: No description found for return value of 'ieee80211_tx_dequeue_ni'
include/net/mac80211.h:7324: warning: No description found for return value of 'ieee80211_next_txq'
include/net/mac80211.h:7405: warning: No description found for return value of 'ieee80211_txq_may_transmit'
include/net/mac80211.h:7466: warning: No description found for return value of 'ieee80211_calc_rx_airtime'
include/net/mac80211.h:7480: warning: No description found for return value of 'ieee80211_calc_tx_airtime'
include/net/mac80211.h:7528: warning: No description found for return value of 'ieee80211_is_tx_data'
include/net/mac80211.h:7562: warning: No description found for return value of 'ieee80211_set_active_links'
17 warnings as Errors
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://msgid.link/20240329-mac80211-kdoc-retval-v1-2-5e4d1ad6c250@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While fixing kernel-doc issues it was discovered that the
ieee80211_set_hw_80211_encap() prototype doesn't actually have an
implementation, so remove it.
Note the implementation was removed in commit 6aea26ce5a ("mac80211:
rework tx encapsulation offload API").
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://msgid.link/20240329-mac80211-kdoc-retval-v1-1-5e4d1ad6c250@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Many devices send event notifications for the IO queues,
such as tx and rx queues, through event queues.
Enable a privileged owner, such as a hypervisor PF, to set the number
of IO event queues for the VF and SF during the provisioning stage.
example:
Get maximum IO event queues of the VF device::
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 10
Set maximum IO event queues of the VF device::
$ devlink port function set pci/0000:06:00.0/2 max_io_eqs 32
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 32
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a "scope" parameter to ip_route_output() so that callers don't have
to override the tos parameter with the RTO_ONLINK flag if they want a
local scope.
This will allow converting flowi4_tos to dscp_t in the future, thus
allowing static analysers to flag invalid interactions between
"tos" (the DSCP bits) and ECN.
Only three users ask for local scope (bonding, arp and atm). The others
continue to use RT_SCOPE_UNIVERSE. While there, add a comment to warn
users about the limitations of ip_route_output().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com> # infiniband
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot is able to trigger an uninit-value in geneve_xmit() [1]
Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield())
uses skb_protocol(skb, true), pskb_inet_may_pull() is only using
skb->protocol.
If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol,
pskb_inet_may_pull() does nothing at all.
If a vlan tag was provided by the caller (af_packet in the syzbot case),
the network header might not point to the correct location, and skb
linear part could be smaller than expected.
Add skb_vlan_inet_prepare() to perform a complete mac validation.
Use this in geneve for the moment, I suspect we need to adopt this
more broadly.
v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest
- Only call __vlan_get_protocol() for vlan types.
Link: https://lore.kernel.org/netdev/20240404100035.3270a7d5@kernel.org/
v2,v3 - Addressed Sabrina comments on v1 and v2
Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/
[1]
BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline]
BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
geneve_xmit_skb drivers/net/geneve.c:910 [inline]
geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
__netdev_start_xmit include/linux/netdevice.h:4903 [inline]
netdev_start_xmit include/linux/netdevice.h:4917 [inline]
xmit_one net/core/dev.c:3531 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
__dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Fixes: d13f048dd4 ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb")
Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
devlink_compat_running_version() sticks out when running
netdevsim tests and watching dropped skbs. Add nlmsg_consume()
for cases were we want to free a netlink skb but it is expected,
rather than a drop. af_netlink code uses consume_skb() directly,
which is fine, but some may prefer the symmetry of nlmsg_new() /
nlmsg_consume().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ->decrypted bit can be reused for other crypto protocols.
Remove the direct dependency on TLS, add helpers to clean up
the ifdefs leaking out everywhere.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi as we didn't consider it
as major enough to justify merging wireless tree to wireless-next. But
Stephen has an example merge resolution which should help with fixing
the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYNIqIRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt8jAf9H+o91boD34/qVdI5LWEcFhVKEkHpNtwm
Y1sTKNBEtN1Gs2zcljjO6PqN9N4v2+lA42KSpzP5M42FfpI2aATI2v8jYsKTXOl2
YVwF+8pDiAsi0YtQTxIthygjzTpsePCfj8z0xJaKGm195T+fMm9UebYETrfxxOp/
z5StsJIPI0twgSLKKUWvLpX4ESt0l0HLJY1ok99sk4Cj36EKn6b9LbBinDKr6GcQ
mGNtPyq0j4l0kS5qae9BbXZUohO54o8wiFnApdwGfA7S/kLY7eUtwZy7T050b62P
zbNafwZbIjrH7dNcGfe6Fdr7PjQYFeI5Nh7dXxqM2LJOQsYXU/tcWQ==
=WrPE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi, Stephen has an example
merge resolution which should help with fixing the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
* tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits)
wifi: mt76: mt7915: workaround dubious x | !y warning
wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings
wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings
wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask
net: rfkill: gpio: Convert to platform remove callback returning void
wifi: mac80211: use kvcalloc() for codel vars
wifi: iwlwifi: reconfigure TLC during HW restart
wifi: iwlwifi: mvm: don't change BA sessions during restart
wifi: iwlwifi: mvm: select STA mask only for active links
wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly
wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9
wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces
wifi: iwlwifi: mvm: Remove outdated comment
wifi: iwlwifi: add support for BZ_W
wifi: iwlwifi: Print a specific device name.
wifi: iwlwifi: remove wrong CRF_IDs
wifi: iwlwifi: remove devices that never came out
wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator
wifi: iwlwifi: mvm: fix active link counting during recovery
wifi: iwlwifi: mvm: assign link STA ID lookups during restart
...
====================
Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be
multiple of 64. So a packet slightly bigger than mtu+14, say 1536,
can be received and cause skb_over_panic.
Sample dmesg:
[ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL>
[ 5325.243689] ------------[ cut here ]------------
[ 5325.245748] kernel BUG at net/core/skbuff.c:192!
[ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60
[ 5325.302941] Call Trace:
[ 5325.304389] <IRQ>
[ 5325.315794] ? skb_panic+0x4f/0x60
[ 5325.317457] ? asm_exc_invalid_op+0x1f/0x30
[ 5325.319490] ? skb_panic+0x4f/0x60
[ 5325.321161] skb_put+0x4e/0x50
[ 5325.322670] mana_poll+0x6fa/0xb50 [mana]
[ 5325.324578] __napi_poll+0x33/0x1e0
[ 5325.326328] net_rx_action+0x12e/0x280
As discussed internally, this alignment is not necessary. To fix
this bug, remove it from the code. So oversized packets will be
marked as CQE_RX_TRUNCATED by NIC, and dropped.
Cc: stable@vger.kernel.org
Fixes: 2fbbd712ba ("net: mana: Enable RX path to handle various MTU sizes")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1712087316-20886-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the previous GC implementation, the shape of the inflight socket
graph was not expected to change while GC was in progress.
MSG_PEEK was tricky because it could install inflight fd silently
and transform the graph.
Let's say we peeked a fd, which was a listening socket, and accept()ed
some embryo sockets from it. The garbage collection algorithm would
have been confused because the set of sockets visited in scan_inflight()
would change within the same GC invocation.
That's why we placed spin_lock(&unix_gc_lock) and spin_unlock() in
unix_peek_fds() with a fat comment.
In the new GC implementation, we no longer garbage-collect the socket
if it exists in another queue, that is, if it has a bridge to another
SCC. Also, accept() will require the lock if it has edges.
Thus, we need not do the complicated lock dance.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240401173125.92184-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 099ecf59f0 ("net: annotate lockless accesses to
sk->sk_max_ack_backlog") decided to handle the sk_max_ack_backlog
locklessly, there is one more function mostly called in TCP/DCCP
cases. So this patch completes it:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240331090521.71965-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genetlink.h is a shell of what used to be a combined uAPI
and kernel header over a decade ago. It has fewer than
10 lines of code. Merge it into net/genetlink.h.
In some ways it'd be better to keep the combined header
under linux/ but it would make looking through git history
harder.
Acked-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20240329175710.291749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can change inet_csk() to propagate its argument const qualifier,
thanks to container_of_const().
We have to fix few places that had mistakes, like tcp_bound_rto().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240329144931.295800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
process_backlog() can batch increments of sd->input_queue_head,
saving some memory bandwidth.
Also add READ_ONCE()/WRITE_ONCE() annotations around
sd->input_queue_head accesses.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
input_queue_tail_incr_save() is incrementing the sd queue_tail
and save it in the flow last_qtail.
Two issues here :
- no lock protects the write on last_qtail, we should use appropriate
annotations.
- We can perform this write after releasing the per-cpu backlog lock,
to decrease this lock hold duration (move away the cache line miss)
Also move input_queue_head_incr() and rps helpers to include/net/rps.h,
while adding rps_ prefix to better reflect their role.
v2: Fixed a build issue (Jakub and kernel build bots)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In PFCP receive path set metadata needed by flower code to do correct
classification based on this metadata.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packet Forwarding Control Protocol (PFCP) is a 3GPP Protocol
used between the control plane and the user plane function.
It is specified in TS 29.244[1].
Note that this module is not designed to support this Protocol
in the kernel space. There is no support for parsing any PFCP messages.
There is no API that could be used by any userspace daemon.
Basically it does not support PFCP. This protocol is sophisticated
and there is no need for implementing it in the kernel. The purpose
of this module is to allow users to setup software and hardware offload
of PFCP packets using tc tool.
When user requests to create a PFCP device, a new socket is created.
The socket is set up with port number 8805 which is specific for
PFCP [29.244 4.2.2]. This allow to receive PFCP request messages,
response messages use other ports.
Note that only one PFCP netdev can be created.
Only IPv4 is supported at this time.
[1] https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=3111
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Historically, tunnel flags like TUNNEL_CSUM or TUNNEL_ERSPAN_OPT
have been defined as __be16. Now all of those 16 bits are occupied
and there's no more free space for new flags.
It can't be simply switched to a bigger container with no
adjustments to the values, since it's an explicit Endian storage,
and on LE systems (__be16)0x0001 equals to
(__be64)0x0001000000000000.
We could probably define new 64-bit flags depending on the
Endianness, i.e. (__be64)0x0001 on BE and (__be64)0x00010000... on
LE, but that would introduce an Endianness dependency and spawn a
ton of Sparse warnings. To mitigate them, all of those places which
were adjusted with this change would be touched anyway, so why not
define stuff properly if there's no choice.
Define IP_TUNNEL_*_BIT counterparts as a bit number instead of the
value already coded and a fistful of <16 <-> bitmap> converters and
helpers. The two flags which have a different bit position are
SIT_ISATAP_BIT and VTI_ISVTI_BIT, as they were defined not as
__cpu_to_be16(), but as (__force __be16), i.e. had different
positions on LE and BE. Now they both have strongly defined places.
Change all __be16 fields which were used to store those flags, to
IP_TUNNEL_DECLARE_FLAGS() -> DECLARE_BITMAP(__IP_TUNNEL_FLAG_NUM) ->
unsigned long[1] for now, and replace all TUNNEL_* occurrences to
their bitmap counterparts. Use the converters in the places which talk
to the userspace, hardware (NFP) or other hosts (GRE header). The rest
must explicitly use the new flags only. This must be done at once,
otherwise there will be too many conversions throughout the code in
the intermediate commits.
Finally, disable the old __be16 flags for use in the kernel code
(except for the two 'irregular' flags mentioned above), to prevent
any accidental (mis)use of them. For the userspace, nothing is
changed, only additions were made.
Most noticeable bloat-o-meter difference (.text):
vmlinux: 307/-1 (306)
gre.ko: 62/0 (62)
ip_gre.ko: 941/-217 (724) [*]
ip_tunnel.ko: 390/-900 (-510) [**]
ip_vti.ko: 138/0 (138)
ip6_gre.ko: 534/-18 (516) [*]
ip6_tunnel.ko: 118/-10 (108)
[*] gre_flags_to_tnl_flags() grew, but still is inlined
[**] ip_tunnel_find() got uninlined, hence such decrease
The average code size increase in non-extreme case is 100-200 bytes
per module, mostly due to sizeof(long) > sizeof(__be16), as
%__IP_TUNNEL_FLAG_NUM is less than %BITS_PER_LONG and the compilers
are able to expand the majority of bitmap_*() calls here into direct
operations on scalars.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure
to store params inside the kernel, IPv4 tunnel code uses the same
ip_tunnel_parm which is being used to talk with the userspace.
This makes it difficult to alter or add any fields or use a
different format for whatever data.
Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for
now, and use it throughout the code. Define the pieces, where the copy
user <-> kernel happens, as standalone functions, and copy the data
there field-by-field, so that the kernel-side structure could be easily
modified later on and the users wouldn't have to care about this.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are, especially with multi-attr arrays, many cases
of needing to iterate all attributes of a specific type
in a netlink message or a nested attribute. Add specific
macros to support that case.
Also convert many instances using this spatch:
@@
iterator nla_for_each_attr;
iterator name nla_for_each_attr_type;
identifier nla;
expression head, len, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_attr(nla, head, len, rem)
+nla_for_each_attr_type(nla, ATTR, head, len, rem)
{
<... T x; ...>
-if (nla_type(nla) == ATTR) {
...
-}
}
@@
identifier nla;
iterator nla_for_each_nested;
iterator name nla_for_each_nested_type;
expression attr, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_nested(nla, attr, rem)
+nla_for_each_nested_type(nla, ATTR, attr, rem)
{
<... T x; ...>
-if (nla_type(nla) == ATTR) {
...
-}
}
@@
iterator nla_for_each_attr;
iterator name nla_for_each_attr_type;
identifier nla;
expression head, len, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_attr(nla, head, len, rem)
+nla_for_each_attr_type(nla, ATTR, head, len, rem)
{
<... T x; ...>
-if (nla_type(nla) != ATTR) continue;
...
}
@@
identifier nla;
iterator nla_for_each_nested;
iterator name nla_for_each_nested_type;
expression attr, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_nested(nla, attr, rem)
+nla_for_each_nested_type(nla, ATTR, attr, rem)
{
<... T x; ...>
-if (nla_type(nla) != ATTR) continue;
...
}
Although I had to undo one bad change this made, and
I also adjusted some other code for whitespace and to
use direct variable initialization now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20240328203144.b5a6c895fb80.I1869b44767379f204998ff44dd239803f39c23e0@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While looking at UDP receive performance, I saw sk_wake_async()
was no longer inlined.
This matters at least on AMD Zen1-4 platforms (see SRSO)
This might be because rcu_read_lock() and rcu_read_unlock()
are no longer nops in recent kernels ?
Add sk_wake_async_rcu() variant, which must be called from
contexts already holding rcu lock.
As SOCK_FASYNC is deprecated in modern days, use unlikely()
to give a hint to the compiler.
sk_wake_async_rcu() is properly inlined from
__udp_enqueue_schedule_skb() and sock_def_readable().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240328144032.1864988-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we find a dead SCC during iteration, we call unix_collect_skb()
to splice all skb in the SCC to the global sk_buff_head, hitlist.
After iterating all SCC, we unlock unix_gc_lock and purge the queue.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-15-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The definition of the lowlink in Tarjan's algorithm is the
smallest index of a vertex that is reachable with at most one
back-edge in SCC. This is not useful for a cross-edge.
If we start traversing from A in the following graph, the final
lowlink of D is 3. The cross-edge here is one between D and C.
A -> B -> D D = (4, 3) (index, lowlink)
^ | | C = (3, 1)
| V | B = (2, 1)
`--- C <--' A = (1, 1)
This is because the lowlink of D is updated with the index of C.
In the following patch, we detect a dead SCC by checking two
conditions for each vertex.
1) vertex has no edge directed to another SCC (no bridge)
2) vertex's out_degree is the same as the refcount of its file
If 1) is false, there is a receiver of all fds of the SCC and
its ancestor SCC.
To evaluate 1), we need to assign a unique index to each SCC and
assign it to all vertices in the SCC.
This patch changes the lowlink update logic for cross-edge so
that in the example above, the lowlink of D is updated with the
lowlink of C.
A -> B -> D D = (4, 1) (index, lowlink)
^ | | C = (3, 1)
| V | B = (2, 1)
`--- C <--' A = (1, 1)
Then, all vertices in the same SCC have the same lowlink, and we
can quickly find the bridge connecting to different SCC if exists.
However, it is no longer called lowlink, so we rename it to
scc_index. (It's sometimes called lowpoint.)
Also, we add a global variable to hold the last index used in DFS
so that we do not reset the initial index in each DFS.
This patch can be squashed to the SCC detection patch but is
split deliberately for anyone wondering why lowlink is not used
as used in the original Tarjan's algorithm and many reference
implementations.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-13-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before starting Tarjan's algorithm, we need to mark all vertices
as unvisited. We can save this O(n) setup by reserving two special
indices (0, 1) and using two variables.
The first time we link a vertex to unix_unvisited_vertices, we set
unix_vertex_unvisited_index to index.
During DFS, we can see that the index of unvisited vertices is the
same as unix_vertex_unvisited_index.
When we finalise SCC later, we set unix_vertex_grouped_index to each
vertex's index.
Then, we can know (i) that the vertex is on the stack if the index
of a visited vertex is >= 2 and (ii) that it is not on the stack and
belongs to a different SCC if the index is unix_vertex_grouped_index.
After the whole algorithm, all indices of vertices are set as
unix_vertex_grouped_index.
Next time we start DFS, we know that all unvisited vertices have
unix_vertex_grouped_index, and we can use unix_vertex_unvisited_index
as the not-on-stack marker.
To use the same variable in __unix_walk_scc(), we can swap
unix_vertex_(grouped|unvisited)_index at the end of Tarjan's
algorithm.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-10-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To garbage collect inflight AF_UNIX sockets, we must define the
cyclic reference appropriately. This is a bit tricky if the loop
consists of embryo sockets.
Suppose that the fd of AF_UNIX socket A is passed to D and the fd B
to C and that C and D are embryo sockets of A and B, respectively.
It may appear that there are two separate graphs, A (-> D) and
B (-> C), but this is not correct.
A --. .-- B
X
C <-' `-> D
Now, D holds A's refcount, and C has B's refcount, so unix_release()
will never be called for A and B when we close() them. However, no
one can call close() for D and C to free skbs holding refcounts of A
and B because C/D is in A/B's receive queue, which should have been
purged by unix_release() for A and B.
So, here's another type of cyclic reference. When a fd of an AF_UNIX
socket is passed to an embryo socket, the reference is indirectly held
by its parent listening socket.
.-> A .-> B
| `- sk_receive_queue | `- sk_receive_queue
| `- skb | `- skb
| `- sk == C | `- sk == D
| `- sk_receive_queue | `- sk_receive_queue
| `- skb +---------' `- skb +-.
| |
`---------------------------------------------------------'
Technically, the graph must be denoted as A <-> B instead of A (-> D)
and B (-> C) to find such a cyclic reference without touching each
socket's receive queue.
.-> A --. .-- B <-.
| X | == A <-> B
`-- C <-' `-> D --'
We apply this fixup during GC by fetching the real successor by
unix_edge_successor().
When we call accept(), we clear unix_sock.listener under unix_gc_lock
not to confuse GC.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a prep patch for the following change, where we need to
fetch the listening socket from the successor embryo socket
during GC.
We add a new field to struct unix_sock to save a pointer to a
listening socket.
We set it when connect() creates a new socket, and clear it when
accept() is called.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the new GC, we use a simple graph algorithm, Tarjan's Strongly
Connected Components (SCC) algorithm, to find cyclic references.
The algorithm visits every vertex exactly once using depth-first
search (DFS).
DFS starts by pushing an input vertex to a stack and assigning it
a unique number. Two fields, index and lowlink, are initialised
with the number, but lowlink could be updated later during DFS.
If a vertex has an edge to an unvisited inflight vertex, we visit
it and do the same processing. So, we will have vertices in the
stack in the order they appear and number them consecutively in
the same order.
If a vertex has a back-edge to a visited vertex in the stack,
we update the predecessor's lowlink with the successor's index.
After iterating edges from the vertex, we check if its index
equals its lowlink.
If the lowlink is different from the index, it shows there was a
back-edge. Then, we go backtracking and propagate the lowlink to
its predecessor and resume the previous edge iteration from the
next edge.
If the lowlink is the same as the index, we pop vertices before
and including the vertex from the stack. Then, the set of vertices
is SCC, possibly forming a cycle. At the same time, we move the
vertices to unix_visited_vertices.
When we finish the algorithm, all vertices in each SCC will be
linked via unix_vertex.scc_entry.
Let's take an example. We have a graph including five inflight
vertices (F is not inflight):
A -> B -> C -> D -> E (-> F)
^ |
`---------'
Suppose that we start DFS from C. We will visit C, D, and B first
and initialise their index and lowlink. Then, the stack looks like
this:
> B = (3, 3) (index, lowlink)
D = (2, 2)
C = (1, 1)
When checking B's edge to C, we update B's lowlink with C's index
and propagate it to D.
B = (3, 1) (index, lowlink)
> D = (2, 1)
C = (1, 1)
Next, we visit E, which has no edge to an inflight vertex.
> E = (4, 4) (index, lowlink)
B = (3, 1)
D = (2, 1)
C = (1, 1)
When we leave from E, its index and lowlink are the same, so we
pop E from the stack as single-vertex SCC. Next, we leave from
B and D but do nothing because their lowlink are different from
their index.
B = (3, 1) (index, lowlink)
D = (2, 1)
> C = (1, 1)
Then, we leave from C, whose index and lowlink are the same, so
we pop B, D and C as SCC.
Last, we do DFS for the rest of vertices, A, which is also a
single-vertex SCC.
Finally, each unix_vertex.scc_entry is linked as follows:
A -. B -> C -> D E -.
^ | ^ | ^ |
`--' `---------' `--'
We use SCC later to decide whether we can garbage-collect the
sockets.
Note that we still cannot detect SCC properly if an edge points
to an embryo socket. The following two patches will sort it out.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new GC will use a depth first search graph algorithm to find
cyclic references. The algorithm visits every vertex exactly once.
Here, we implement the DFS part without recursion so that no one
can abuse it.
unix_walk_scc() marks every vertex unvisited by initialising index
as UNIX_VERTEX_INDEX_UNVISITED and iterates inflight vertices in
unix_unvisited_vertices and call __unix_walk_scc() to start DFS from
an arbitrary vertex.
__unix_walk_scc() iterates all edges starting from the vertex and
explores the neighbour vertices with DFS using edge_stack.
After visiting all neighbours, __unix_walk_scc() moves the visited
vertex to unix_visited_vertices so that unix_walk_scc() will not
restart DFS from the visited vertex.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As with the previous patch, we preallocate to skb's scm_fp_list an
array of struct unix_edge in the number of inflight AF_UNIX fds.
There we just preallocate memory and do not use immediately because
sendmsg() could fail after this point. The actual use will be in
the next patch.
When we queue skb with inflight edges, we will set the inflight
socket's unix_sock as unix_edge->predecessor and the receiver's
unix_sock as successor, and then we will link the edge to the
inflight socket's unix_vertex.edges.
Note that we set NULL to cloned scm_fp_list.edges in scm_fp_dup()
so that MSG_PEEK does not change the shape of the directed graph.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will replace the garbage collection algorithm for AF_UNIX, where
we will consider each inflight AF_UNIX socket as a vertex and its file
descriptor as an edge in a directed graph.
This patch introduces a new struct unix_vertex representing a vertex
in the graph and adds its pointer to struct unix_sock.
When we send a fd using the SCM_RIGHTS message, we allocate struct
scm_fp_list to struct scm_cookie in scm_fp_copy(). Then, we bump
each refcount of the inflight fds' struct file and save them in
scm_fp_list.fp.
After that, unix_attach_fds() inexplicably clones scm_fp_list of
scm_cookie and sets it to skb. (We will remove this part after
replacing GC.)
Here, we add a new function call in unix_attach_fds() to preallocate
struct unix_vertex per inflight AF_UNIX fd and link each vertex to
skb's scm_fp_list.vertices.
When sendmsg() succeeds later, if the socket of the inflight fd is
still not inflight yet, we will set the preallocated vertex to struct
unix_sock.vertex and link it to a global list unix_unvisited_vertices
under spin_lock(&unix_gc_lock).
If the socket is already inflight, we free the preallocated vertex.
This is to avoid taking the lock unnecessarily when sendmsg() could
fail later.
In the following patch, we will similarly allocate another struct
per edge, which will finally be linked to the inflight socket's
unix_vertex.edges.
And then, we will count the number of edges as unix_vertex.out_degree.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some Bluetooth controllers lack persistent storage for the device
address and instead one can be provided by the boot firmware using the
'local-bd-address' devicetree property.
The Bluetooth devicetree bindings clearly states that the address should
be specified in little-endian order, but due to a long-standing bug in
the Qualcomm driver which reversed the address some boot firmware has
been providing the address in big-endian order instead.
Add a new quirk that can be set on platforms with broken firmware and
use it to reverse the address when parsing the property so that the
underlying driver bug can be fixed.
Fixes: 5c0a1001c8 ("Bluetooth: hci_qca: Add helper to set device address")
Cc: stable@vger.kernel.org # 5.1
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
smc_hash_sk and smc_unhash_sk are only used in af_smc.c, so make them
static and remove the output symbol. They can be called under the path
.prot->hash()/unhash().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
TC filters come in 3 variants:
- no flag (try to process in hardware, but fallback to software))
- skip_hw (do not process filter by hardware)
- skip_sw (do not process filter by software)
However skip_sw is implemented so that the skip_sw
flag can first be checked, after it has been matched.
IMHO it's common when using skip_sw, to use it on all rules.
So if all filters in a block is skip_sw filters, then
we can bail early, we can thus avoid having to match
the filters, just to check for the skip_sw flag.
This patch adds a bypass, for when only TC skip_sw rules
are used. The bypass is guarded by a static key, to avoid
harming other workloads.
There are 3 ways that a packet from a skip_sw ruleset, can
end up in the kernel path. Although the send packets to a
non-existent chain way is only improved a few percents, then
I believe it's worth optimizing the trap and fall-though
use-cases.
+----------------------------+--------+--------+--------+
| Test description | Pre- | Post- | Rel. |
| | kpps | kpps | chg. |
+----------------------------+--------+--------+--------+
| basic forwarding + notrack | 3589.3 | 3587.9 | 1.00x |
| switch to eswitch mode | 3081.8 | 3094.7 | 1.00x |
| add ingress qdisc | 3042.9 | 3063.6 | 1.01x |
| tc forward in hw / skip_sw |37024.7 |37028.4 | 1.00x |
| tc forward in sw / skip_hw | 3245.0 | 3245.3 | 1.00x |
+----------------------------+--------+--------+--------+
| tests with only skip_sw rules below: |
+----------------------------+--------+--------+--------+
| 1 non-matching rule | 2694.7 | 3058.7 | 1.14x |
| 1 n-m rule, match trap | 2611.2 | 3323.1 | 1.27x |
| 1 n-m rule, goto non-chain | 2886.8 | 2945.9 | 1.02x |
| 5 non-matching rules | 1958.2 | 3061.3 | 1.56x |
| 5 n-m rules, match trap | 1911.9 | 3327.0 | 1.74x |
| 5 n-m rules, goto non-chain| 2883.1 | 2947.5 | 1.02x |
| 10 non-matching rules | 1466.3 | 3062.8 | 2.09x |
| 10 n-m rules, match trap | 1444.3 | 3317.9 | 2.30x |
| 10 n-m rules,goto non-chain| 2883.1 | 2939.5 | 1.02x |
| 25 non-matching rules | 838.5 | 3058.9 | 3.65x |
| 25 n-m rules, match trap | 824.5 | 3323.0 | 4.03x |
| 25 n-m rules,goto non-chain| 2875.8 | 2944.7 | 1.02x |
| 50 non-matching rules | 488.1 | 3054.7 | 6.26x |
| 50 n-m rules, match trap | 484.9 | 3318.5 | 6.84x |
| 50 n-m rules,goto non-chain| 2884.1 | 2939.7 | 1.02x |
+----------------------------+--------+--------+--------+
perf top (25 n-m skip_sw rules - pre patch):
20.39% [kernel] [k] __skb_flow_dissect
16.43% [kernel] [k] rhashtable_jhash2
10.58% [kernel] [k] fl_classify
10.23% [kernel] [k] fl_mask_lookup
4.79% [kernel] [k] memset_orig
2.58% [kernel] [k] tcf_classify
1.47% [kernel] [k] __x86_indirect_thunk_rax
1.42% [kernel] [k] __dev_queue_xmit
1.36% [kernel] [k] nft_do_chain
1.21% [kernel] [k] __rcu_read_lock
perf top (25 n-m skip_sw rules - post patch):
5.12% [kernel] [k] __dev_queue_xmit
4.77% [kernel] [k] nft_do_chain
3.65% [kernel] [k] dev_gro_receive
3.41% [kernel] [k] check_preemption_disabled
3.14% [kernel] [k] mlx5e_skb_from_cqe_mpwrq_nonlinear
2.88% [kernel] [k] __netif_receive_skb_core.constprop.0
2.49% [kernel] [k] mlx5e_xmit
2.15% [kernel] [k] ip_forward
1.95% [kernel] [k] mlx5e_tc_restore_tunnel
1.92% [kernel] [k] vlan_gro_receive
Test setup:
DUT: Intel Xeon D-1518 (2.20GHz) w/ Nvidia/Mellanox ConnectX-6 Dx 2x100G
Data rate measured on switch (Extreme X690), and DUT connected as
a router on a stick, with pktgen and pktsink as VLANs.
Pktgen-dpdk was in range 36.6-37.7 Mpps 64B packets across all tests.
Full test data at https://files.fiberby.net/ast/2024/tc_skip_sw/v2_tests/
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maintain a count of filters per block.
Counter updates are protected by cb_lock, which is
also used to protect the offload counters.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maintain a count of skip_sw filters.
This counter is protected by the cb_lock, and is updated
at the same time as offloadcnt.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYEbzoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZsjZwgApoOcTn/mkX7DEViByMUpOrdNYqkJh+Tv
RkDDqhbA97i+zlxWp1dwtdfn0CYEcCW2XBucrfDNZMcR/cfXy2Wgdr6BD/FG9S2D
oQX6QQijO7g9uqNgDfIVAC0ftJEeWkM7YUhqNDVR751gjy2WOOJqPtSgNGd873By
P0rbHyfykHMzyYbwlzMLosO3RigefD1p1qkkODPf2OMo5A4tL1gL9AfEk3Kef9sf
9JHHWCLR378sm2sMpGw2Lxw4ypazl08ABu1yAWJk6Xipn80D/b08YUH/1yiKuq22
JrxhllJu2nqaHxXOzje2WEapTBz9tpTAwigOUQJiVZWm6ii19giGng==
=89Ft
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.9-rc2
The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.
* tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (21 commits)
MAINTAINERS: wifi: mwifiex: add Francesco as reviewer
kunit: fix wireless test dependencies
wifi: iwlwifi: mvm: include link ID when releasing frames
wifi: iwlwifi: mvm: handle debugfs names more carefully
wifi: iwlwifi: mvm: guard against invalid STA ID on removal
wifi: iwlwifi: read txq->read_ptr under lock
wifi: iwlwifi: fw: don't always use FW dump trig
wifi: iwlwifi: mvm: rfi: fix potential response leaks
wifi: mac80211: correctly set active links upon TTLM
wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW
wifi: iwlwifi: mvm: consider having one active link
wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF
wifi: mac80211: fix prep_connection error path
wifi: cfg80211: fix rdev_dump_mpp() arguments order
wifi: iwlwifi: mvm: disable MLO for the time being
wifi: cfg80211: add a flag to disable wireless extensions
wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc
wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes
wifi: mac80211: fix mlme_link_id_dbg()
MAINTAINERS: wifi: add git tree for Realtek WiFi drivers
...
====================
Link: https://lore.kernel.org/r/20240327191346.1A1EAC433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZgHmTAAKCRDbK58LschI
g1gWAP9HjAWE/Sy0B2t9opIiTqRzdMJLYs2B4OFeHRI6+qQg0gD6A4jsKEh/xmtG
Hhjw+AElJRFZ3SUIT4mZlljzUHIYYAA=
=T0lM
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-03-25
The following pull-request contains BPF updates for your *net* tree.
We've added 17 non-merge commits during the last 12 day(s) which contain
a total of 19 files changed, 184 insertions(+), 61 deletions(-).
The main changes are:
1) Fix an arm64 BPF JIT bug in BPF_LDX_MEMSX implementation's offset handling
found via test_bpf module, from Puranjay Mohan.
2) Various fixups to the BPF arena code in particular in the BPF verifier and
around BPF selftests to match latest corresponding LLVM implementation,
from Puranjay Mohan and Alexei Starovoitov.
3) Fix xsk to not assume that metadata is always requested in TX completion,
from Stanislav Fomichev.
4) Fix riscv BPF JIT's kfunc parameter incompatibility between BPF and the riscv
ABI which requires sign-extension on int/uint, from Pu Lehui.
5) Fix s390x BPF JIT's bpf_plt pointer arithmetic which triggered a crash when
testing struct_ops, from Ilya Leoshkevich.
6) Fix libbpf's arena mmap handling which had incorrect u64-to-pointer cast on
32-bit architectures, from Andrii Nakryiko.
7) Fix libbpf to define MFD_CLOEXEC when not available, from Arnaldo Carvalho de Melo.
8) Fix arm64 BPF JIT implementation for 32bit unconditional bswap which
resulted in an incorrect swap as indicated by test_bpf, from Artem Savkov.
9) Fix BPF man page build script to use silent mode, from Hangbin Liu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
riscv, bpf: Fix kfunc parameters incompatibility between bpf and riscv abi
bpf: verifier: reject addr_space_cast insn without arena
selftests/bpf: verifier_arena: fix mmap address for arm64
bpf: verifier: fix addr_space_cast from as(1) to as(0)
libbpf: Define MFD_CLOEXEC if not available
arm64: bpf: fix 32bit unconditional bswap
bpf, arm64: fix bug in BPF_LDX_MEMSX
libbpf: fix u64-to-pointer cast on 32-bit arches
s390/bpf: Fix bpf_plt pointer arithmetic
xsk: Don't assume metadata is always requested in TX completion
selftests/bpf: Add arena test case for 4Gbyte corner case
selftests/bpf: Remove hard coded PAGE_SIZE macro.
libbpf, selftests/bpf: Adjust libbpf, bpftool, selftests to match LLVM
bpf: Clarify bpf_arena comments.
MAINTAINERS: Update email address for Quentin Monnet
scripts/bpf_doc: Use silent mode when exec make cmd
bpf: Temporarily disable atomic operations in BPF arena
====================
Link: https://lore.kernel.org/r/20240325213520.26688-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We had various syzbot reports about tcp timers firing after
the corresponding netns has been dismantled.
Fortunately Josef Bacik could trigger the issue more often,
and could test a patch I wrote two years ago.
When TCP sockets are closed, we call inet_csk_clear_xmit_timers()
to 'stop' the timers.
inet_csk_clear_xmit_timers() can be called from any context,
including when socket lock is held.
This is the reason it uses sk_stop_timer(), aka del_timer().
This means that ongoing timers might finish much later.
For user sockets, this is fine because each running timer
holds a reference on the socket, and the user socket holds
a reference on the netns.
For kernel sockets, we risk that the netns is freed before
timer can complete, because kernel sockets do not hold
reference on the netns.
This patch adds inet_csk_clear_xmit_timers_sync() function
that using sk_stop_timer_sync() to make sure all timers
are terminated before the kernel socket is released.
Modules using kernel sockets close them in their netns exit()
handler.
Also add sock_not_owned_by_me() helper to get LOCKDEP
support : inet_csk_clear_xmit_timers_sync() must not be called
while socket lock is held.
It is very possible we can revert in the future commit
3a58f13a88 ("net: rds: acquire refcount on TCP sockets")
which attempted to solve the issue in rds only.
(net/smc/af_smc.c and net/mptcp/subflow.c have similar code)
We probably can remove the check_net() tests from
tcp_out_of_resources() and __tcp_close() in the future.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Closes: https://lore.kernel.org/netdev/20240314210740.GA2823176@perftesting/
Fixes: 26abe14379 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Fixes: 8a68173691 ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket")
Link: https://lore.kernel.org/bpf/CANn89i+484ffqb93aQm1N-tjxxvb3WDKX0EbD7318RwRgsatjw@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Josef Bacik <josef@toxicpanda.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20240322135732.1535772-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to activate a link that is currently inactive due to
a negotiated TTLM request, need to first tear down the negotiated
TTLM request.
Add support for sending TTLM teardown request and update the links
state accordingly.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.d480cbf46fcf.Idedad472469d2c27dd2a088cf80a13a1e1cf9b78@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some devices may not be capable of handling puncturing in 5 GHz
only (vs. the current flag that just removes puncturing support
completely). Add a flag to support such devices: check and then
downgrade the channel width if needed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.49759510da7d.I12c5a61f0be512e0c4e574c2f794ef4b37ecaf6b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
BSS_CHANGED_MLD_TTLM purpose is to let the driver know that
negotiated TTLM was updated and as a result MLD suspended links
status was change.
Fix the description to better reflect it.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.52b893a70758.I2dcb322b389441f33605fb952450cc2724eb9efd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since I keep getting confused about this and asking about it,
update the documentation.
In the future, especially when we add more reasons for a link
to be disabled, we should add a per-link 'disable state' bitmap
instead of maintaining all these bitmaps with subset logic, to
indicate each of the different states separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.a5b24595b1a2.I92dd7d177b25df189b842d3bcddb1f2b13b1de13@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Wireless extensions are already disabled if MLO is enabled,
given that we cannot support MLO there with all the hard-
coded assumptions about BSSID etc.
However, the WiFi7 ecosystem is still stabilizing, and some
devices may need MLO disabled while that happens. In that
case, we might end up with a device that supports wext (but
not MLO) in one kernel, and then breaks wext in the future
(by enabling MLO), which is not desirable.
Add a flag to let such drivers/devices disable wext even if
MLO isn't yet enabled.
Cc: stable@vger.kernel.org
Link: https://msgid.link/20240314110951.b50f1dc4ec21.I656ddd8178eedb49dc5c6c0e70f8ce5807afb54f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Current release - regressions:
- rxrpc: fix use of page_frag_alloc_align(), it changed semantics
and we added a new caller in a different subtree
- xfrm: allow UDP encapsulation only in offload modes
Current release - new code bugs:
- tcp: fix refcnt handling in __inet_hash_connect()
- Revert "net: Re-use and set mono_delivery_time bit for userspace tstamp
packets", conflicted with some expectations in BPF uAPI
Previous releases - regressions:
- ipv4: raw: fix sending packets from raw sockets via IPsec tunnels
- devlink: fix devlink's parallel command processing
- veth: do not manipulate GRO when using XDP
- esp: fix bad handling of pages from page_pool
Previous releases - always broken:
- report RCU QS for busy network kthreads (with Paul McK's blessing)
- tcp/rds: fix use-after-free on netns with kernel TCP reqsk
- virt: vmxnet3: fix missing reserved tailroom with XDP
Misc:
- couple of build fixes for Documentation
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gpLl
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter, wireguard and IPsec.
I'd like to highlight [ lowlight? - Linus ] Florian W stepping down as
a netfilter maintainer due to constant stream of bug reports. Not sure
what we can do but IIUC this is not the first such case.
Current release - regressions:
- rxrpc: fix use of page_frag_alloc_align(), it changed semantics and
we added a new caller in a different subtree
- xfrm: allow UDP encapsulation only in offload modes
Current release - new code bugs:
- tcp: fix refcnt handling in __inet_hash_connect()
- Revert "net: Re-use and set mono_delivery_time bit for userspace
tstamp packets", conflicted with some expectations in BPF uAPI
Previous releases - regressions:
- ipv4: raw: fix sending packets from raw sockets via IPsec tunnels
- devlink: fix devlink's parallel command processing
- veth: do not manipulate GRO when using XDP
- esp: fix bad handling of pages from page_pool
Previous releases - always broken:
- report RCU QS for busy network kthreads (with Paul McK's blessing)
- tcp/rds: fix use-after-free on netns with kernel TCP reqsk
- virt: vmxnet3: fix missing reserved tailroom with XDP
Misc:
- couple of build fixes for Documentation"
* tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
selftests: forwarding: Fix ping failure due to short timeout
MAINTAINERS: step down as netfilter maintainer
netfilter: nf_tables: Fix a memory leak in nf_tables_updchain
net: dsa: mt7530: fix handling of all link-local frames
net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports
bpf: report RCU QS in cpumap kthread
net: report RCU QS on threaded NAPI repolling
rcu: add a helper to report consolidated flavor QS
ionic: update documentation for XDP support
lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel doc
netfilter: nf_tables: do not compare internal table flags on updates
netfilter: nft_set_pipapo: release elements in clone only from destroy path
octeontx2-af: Use separate handlers for interrupts
octeontx2-pf: Send UP messages to VF only when VF is up.
octeontx2-pf: Use default max_active works instead of one
octeontx2-pf: Wait till detach_resources msg is complete
octeontx2: Detect the mbox up or down message via register
devlink: fix port new reply cmd type
tcp: Clear req->syncookie in reqsk_alloc().
net/bnx2x: Prevent access to a freed page in page_pool
...
`compl->tx_timestam != NULL` means that the user has explicitly
requested the metadata via XDP_TX_METADATA+XDP_TX_METADATA_TIMESTAMP.
Fixes: 48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
Reported-by: Daniele Salvatore Albano <d.albano@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniele Salvatore Albano <d.albano@gmail.com>
Link: https://lore.kernel.org/bpf/20240318165427.1403313-1-sdf@google.com
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Core & protocols
----------------
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps etc.)
lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core
instead of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length
and budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global config
variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug
of ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for
use on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code
--------------------------------------------
- Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
- Rework selftest harness to enable the use of the full range of
ksft exit code (pass, fail, skip, xfail, xpass).
Netfilter
---------
- Allow userspace to define a table that is exclusively owned by a daemon
(via netlink socket aliveness) without auto-removing this table when
the userspace program exits. Such table gets marked as orphaned and
a restarting management daemon can re-attach/regain ownership.
- Speed up element insertions to nftables' concatenated-ranges set type.
Compact a few related data structures.
BPF
---
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between BPF
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly
for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects.
Wireless
--------
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API
----------
- Major overhaul of the Energy Efficient Ethernet internals to support
new link modes (2.5GE, 5GE), share more code between drivers
(especially those using phylib), and encourage more uniform behavior.
Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc
----
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions,
and packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message encapsulation
or "Netlink polymorphism", where interpretation of nested attributes
depends on link type, classifier type or some other "class type".
Drivers
-------
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic
on CAN BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO) support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oY52
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
- The biggest change is the rework of the percpu code,
to support the 'Named Address Spaces' GCC feature,
by Uros Bizjak:
- This allows C code to access GS and FS segment relative
memory via variables declared with such attributes,
which allows the compiler to better optimize those accesses
than the previous inline assembly code.
- The series also includes a number of micro-optimizations
for various percpu access methods, plus a number of
cleanups of %gs accesses in assembly code.
- These changes have been exposed to linux-next testing for
the last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally
working handling of FPU switching - which also generates
better code.
- Propagate more RIP-relative addressing in assembly code,
to generate slightly better code.
- Rework the CPU mitigations Kconfig space to be less idiosyncratic,
to make it easier for distros to follow & maintain these options.
- Rework the x86 idle code to cure RCU violations and
to clean up the logic.
- Clean up the vDSO Makefile logic.
- Misc cleanups and fixes.
[ Please note that there's a higher number of merge commits in
this branch (three) than is usual in x86 topic trees. This happened
due to the long testing lifecycle of the percpu changes that
involved 3 merge windows, which generated a longer history
and various interactions with other core x86 changes that we
felt better about to carry in a single branch. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3v4F
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
When sending the notifications to collect NH statistics for resilient
groups, the driver will need to know the nexthop IDs in individual buckets
to look up the right counter. To that end, move the nexthop ID from struct
nh_notifier_grp_entry_info to nh_notifier_single_info.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/8f964cd50b1a56d3606ce7ab4c50354ae019c43b.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move gro_find_receive_by_type() and gro_find_complete_by_type()
to include/net/gro.h where they belong.
Also use _NET_GRO_H instead of _NET_IPV6_GRO_H to protect
include/net/gro.h from multiple inclusions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240308102230.296224-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Hy//
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/io_uring-20240310' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Make running of task_work internal loops more fair, and unify how the
different methods deal with them (me)
- Support for per-ring NAPI. The two minor networking patches are in a
shared branch with netdev (Stefan)
- Add support for truncate (Tony)
- Export SQPOLL utilization stats (Xiaobing)
- Multishot fixes (Pavel)
- Fix for a race in manipulating the request flags via poll (Pavel)
- Cleanup the multishot checking by making it generic, moving it out of
opcode handlers (Pavel)
- Various tweaks and cleanups (me, Kunwu, Alexander)
* tag 'for-6.9/io_uring-20240310' of git://git.kernel.dk/linux: (53 commits)
io_uring: Fix sqpoll utilization check racing with dying sqpoll
io_uring/net: dedup io_recv_finish req completion
io_uring: refactor DEFER_TASKRUN multishot checks
io_uring: fix mshot io-wq checks
io_uring/net: add io_req_msg_cleanup() helper
io_uring/net: simplify msghd->msg_inq checking
io_uring/kbuf: rename REQ_F_PARTIAL_IO to REQ_F_BL_NO_RECYCLE
io_uring/net: remove dependency on REQ_F_PARTIAL_IO for sr->done_io
io_uring/net: correctly handle multishot recvmsg retry setup
io_uring/net: clear REQ_F_BL_EMPTY in the multishot retry handler
io_uring: fix io_queue_proc modifying req->flags
io_uring: fix mshot read defer taskrun cqe posting
io_uring/net: fix overflow check in io_recvmsg_mshot_prep()
io_uring/net: correct the type of variable
io_uring/sqpoll: statistics of the true utilization of sq threads
io_uring/net: move recv/recvmsg flags out of retry loop
io_uring/kbuf: flag request if buffer pool is empty after buffer pick
io_uring/net: improve the usercopy for sendmsg/recvmsg
io_uring/net: move receive multishot out of the generic msghdr path
io_uring/net: unify how recvmsg and sendmsg copy in the msghdr
...
- hci_conn: Only do ACL connections sequentially
- hci_core: Cancel request on command timeout
- Remove CONFIG_BT_HS
- btrtl: Add the support for RTL8852BT/RTL8852BE-VT
- btusb: Add support Mediatek MT7920
- btusb: Add new VID/PID 13d3/3602 for MT7925
- Add new quirk for broken read key length on ATS2851
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmXrU9AZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKV4KD/9Ik0EwI4utskMShX9qxnqi
8i5LBocslSFWN3gqrNUAJTxwlSgYntRK4L4v+566/Y/DISUV7OLx9hRJ8QpzWhWl
mKweR3kB2HG8/Su6E2VbzjQTriSBuwPiMIeGwP9H5d+bN+6sNLmcl+II9QjapMYQ
f13ZA/zQzwDlk8A5jTw1N/cOknblvlNNYUwIPlGzJK9COtQqAVSBRz00ugXmR1LG
+UZqzOgXSNFQ2m4PCsozy4fCAVk/NaXBsdnKrsQurND30MJw1jKd9lRaIkQ+eLNv
phYfsYLeDDtjMei4j0t23CKOSceMdvFWLtDn3wpBmZbXs8Avd13FRYxf/U88D09g
FTNhOLbVyZbWSAEqIMuWZv/EuzZvIpOZRSlCn2hJgJTRuqIi6I9mRDF0ZD4LGUzR
/Es/Ozfxw9CfHFRFsiM46cGgQ01Ddq4SihZnlTQfdkBPjQcAhiJ3GbIUAZs+HHVB
QFoFLAJWepInGfmyyFHngEzdh9r5zFsA/+PL6duQ1+HqJFZbhPWtgYXijrjuimZo
IdcmM4KUUaRWwdDivDq9X5s9luQ1BobNxvVIPlpz61QDu2uMlrilXAgNoZJtalTU
ltQxxE9oPUv5tb8xybBYklKM9keyjTGzL3Y/LluDPgzUoY+w5gTcvEqD8ByhzEw6
ouE5TO7r0k1h9BhHZSYHzw==
=Jqow
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- hci_conn: Only do ACL connections sequentially
- hci_core: Cancel request on command timeout
- Remove CONFIG_BT_HS
- btrtl: Add the support for RTL8852BT/RTL8852BE-VT
- btusb: Add support Mediatek MT7920
- btusb: Add new VID/PID 13d3/3602 for MT7925
- Add new quirk for broken read key length on ATS2851
* tag 'for-net-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (52 commits)
Bluetooth: hci_sync: Fix UAF in hci_acl_create_conn_sync
Bluetooth: Fix eir name length
Bluetooth: ISO: Align broadcast sync_timeout with connection timeout
Bluetooth: Add new quirk for broken read key length on ATS2851
Bluetooth: mgmt: remove NULL check in add_ext_adv_params_complete()
Bluetooth: mgmt: remove NULL check in mgmt_set_connectable_complete()
Bluetooth: btusb: Add support Mediatek MT7920
Bluetooth: btmtk: Add MODULE_FIRMWARE() for MT7922
Bluetooth: btnxpuart: Fix btnxpuart_close
Bluetooth: ISO: Clean up returns values in iso_connect_ind()
Bluetooth: fix use-after-free in accessing skb after sending it
Bluetooth: af_bluetooth: Fix deadlock
Bluetooth: bnep: Fix out-of-bound access
Bluetooth: btusb: Fix memory leak
Bluetooth: msft: Fix memory leak
Bluetooth: hci_core: Fix possible buffer overflow
Bluetooth: btrtl: fix out of bounds memory access
Bluetooth: hci_h5: Add ability to allocate memory for private data
Bluetooth: hci_sync: Fix overwriting request callback
Bluetooth: hci_sync: Use QoS to determine which PHY to scan
...
====================
Link: https://lore.kernel.org/r/20240308181056.120547-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2024-03-07
Various cross tree patches for ieee802154v drivers and a resource leak
fix for ieee802154 llsec.
Andy Shevchenko changed GPIO header usage for at86rf230 and mcr20a to
only include needed headers.
Bo Liu converted the at86rf230, mcr20a and mrf24j40 driver regmap
support to use the maple tree register cache.
Fedor Pchelkin fixed a resource leak in the llsec key deletion path.
Ricardo B. Marliere made wpan_phy_class const.
Tejun Heo removed WQ_UNBOUND from a workqueue call in ca8210.
* tag 'ieee802154-for-net-next-2024-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next:
ieee802154: cfg802154: make wpan_phy_class constant
ieee802154: mcr20a: Remove unused of_gpio.h
ieee802154: at86rf230: Replace of_gpio.h by proper one
mac802154: fix llsec key resources release in mac802154_llsec_key_del
ieee802154: ca8210: Drop spurious WQ_UNBOUND from alloc_ordered_workqueue() call
net: ieee802154: mrf24j40: convert to use maple tree register cache
net: ieee802154: mcr20a: convert to use maple tree register cache
net: ieee802154: at86rf230: convert to use maple tree register cache
====================
Link: https://lore.kernel.org/r/20240307195105.292085-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fourth "new features" pull request for v6.9 with changes both in
stack and in drivers. The theme in this pull request is to fix sparse
warnings but we still have some left in wireless subsystem. Otherwise
quite normal.
Major changes:
rtw89
* NL80211_EXT_FEATURE_SCAN_RANDOM_SN support
* NL80211_EXT_FEATURE_SET_SCAN_DWELL support
rtw88
* support for more rtw8811cu and rtw8821cu devices
mt76
* mt76x2u: add Netgear WNDA3100v3 USB
* mt7915: newer ADIE version support
* mt7925: radio temperature sensor support
* mt7996: remove GCMP IGTK offload
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXq4hARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtOawf9Gf2FAi56zA/4vKJPE/mZzRvNodj/u9WL
mEX3KERw744IEmWY0yXEAyvzKkkNqUUtmdUbbsnXnnEtzsVZ2oRmOZdXsvEW3vOD
IEsjWY/405MBWyuBttAa6orBSgelr99k86HzoLN86s52HmliVDhr2EUnYIf2O++9
SVhHFKE4BMVCO6hlyEg419K9M2VhWtBDNYweoXAfn8Y1byAw6Pt6WunjRuGwJG5n
qvcrZcFCFSa3daPpx0uIA/yiSjZlq0hwVC3r/PnoX/r1FDR8tS2ecvC2rP3MaZJ+
1x3IcNvwC97D80wvdW+f+qKtV4OXZefsZpzJJpvREH8FbAgYLDef0Q==
=gln7
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The fourth "new features" pull request for v6.9 with changes both in
stack and in drivers. The theme in this pull request is to fix sparse
warnings but we still have some left in wireless subsystem. Otherwise
quite normal.
Major changes:
rtw89
* NL80211_EXT_FEATURE_SCAN_RANDOM_SN support
* NL80211_EXT_FEATURE_SET_SCAN_DWELL support
rtw88
* support for more rtw8811cu and rtw8821cu devices
mt76
* mt76x2u: add Netgear WNDA3100v3 USB
* mt7915: newer ADIE version support
* mt7925: radio temperature sensor support
* mt7996: remove GCMP IGTK offload
* tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits)
wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode
wifi: rtw89: wow: set security engine options for 802.11ax chips only
wifi: rtw89: update suspend/resume for different generation
wifi: rtw89: wow: update config mac function with different generation
wifi: rtw89: update DMA function with different generation
wifi: rtw89: wow: update WoWLAN status register for different generation
wifi: rtw89: wow: update WoWLAN reason register for different chips
wifi: brcm80211: handle pmk_op allocation failure
wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR
wifi: rtw89: coex: When Bluetooth not available don't set power/gain
wifi: rtw89: coex: add return value to ensure H2C command is success or not
wifi: rtw89: coex: Reorder H2C command index to align with firmware
wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic
wifi: rtw89: coex: add init_info H2C command format version 7
wifi: rtw89: 8922a: add coexistence helpers of SW grant
wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt
wifi: cw1200: restore endian swapping
wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns
wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte
wifi: rtw88: 8821c: Fix false alarm count
...
====================
Link: https://lore.kernel.org/r/20240308100429.B8EA2C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add netlink support for reading NH group hardware stats.
Stats collection is done through a new notifier,
NEXTHOP_EVENT_HW_STATS_REPORT_DELTA. Drivers that implement HW counters for
a given NH group are thereby asked to collect the stats and report back to
core by calling nh_grp_hw_stats_report_delta(). This is similar to what
netdevice L3 stats do.
Besides exposing number of packets that passed in the HW datapath, also
include information on whether any driver actually realizes the counters.
The core can tell based on whether it got any _report_delta() reports from
the drivers. This allows enabling the statistics at the group at any time,
with drivers opting into supporting them. This is also in line with what
netdevice L3 stats are doing.
So as not to waste time and space, tie the collection and reporting of HW
stats with a new op flag, NHA_OP_FLAG_DUMP_HW_STATS.
Co-developed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Kees Cook <keescook@chromium.org> # For the __counted_by bits
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add netlink support for enabling collection of HW statistics on nexthop
groups.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add hw_stats field to several notifier structures to communicate to the
drivers that HW statistics should be configured for nexthops within a given
group.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add nexthop group entry stats to count the number of packets forwarded
via each nexthop in the group. The stats will be exposed to user space
for better data path observability in the next patch.
The per-CPU stats pointer is placed at the beginning of 'struct
nh_grp_entry', so that all the fields accessed for the data path reside
on the same cache line:
struct nh_grp_entry {
struct nexthop * nh; /* 0 8 */
struct nh_grp_entry_stats * stats; /* 8 8 */
u8 weight; /* 16 1 */
/* XXX 7 bytes hole, try to pack */
union {
struct {
atomic_t upper_bound; /* 24 4 */
} hthr; /* 24 4 */
struct {
struct list_head uw_nh_entry; /* 24 16 */
u16 count_buckets; /* 40 2 */
u16 wants_buckets; /* 42 2 */
} res; /* 24 24 */
}; /* 24 24 */
struct list_head nh_list; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct nexthop * nh_parent; /* 64 8 */
/* size: 72, cachelines: 2, members: 6 */
/* sum members: 65, holes: 1, sum holes: 7 */
/* last cacheline: 8 bytes */
};
Co-developed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rx alloc failures are commonly counted by drivers.
Support reporting those via netdev-genl queue stats.
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rps_sock_flow_table and rps_cpu_mask are used in fast path.
Move them to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-19-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move RPS related structures and helpers from include/linux/netdevice.h
and include/net/sock.h to a new include file.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-18-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use a 32bit hole in "struct net_offload" to store
the remaining 32bit secrets used by TCPv6 and UDPv6.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-17-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"struct inet6_protocol" has a 32bit hole in 32bit arches.
Use it to store the 32bit secret used by UDP and TCP,
to increase cache locality in rx path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-16-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"struct net_protocol" has a 32bit hole in 32bit arches.
Use it to store the 32bit secret used by UDP and TCP,
to increase cache locality in rx path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-15-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These structures are read in rx path, move them to net_hotdata
for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-14-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These structures are read in rx path, move them to net_hotdata
for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-13-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These structures are used in GRO and GSO paths.
Move them to net_hodata for better cache locality.
v2: udpv6_offload definition depends on CONFIG_INET=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skbuff_cache, skbuff_fclone_cache and skb_small_head_cache
are used in rx/tx fast paths.
Move them to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_rx_weight is read from process_backlog().
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_tx_weight is used in tx fast path.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These are used in TCP fast paths.
Move them into net_hotdata for better cache locality.
v2: tcpv6_offload definition depends on CONFIG_INET
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These structures are used in GRO and GSO paths.
v2: ipv6_packet_offload definition depends on CONFIG_INET
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_max_backlog is used in rx fat path.
Move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ptype_all is used in rx/tx fast paths.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_tstamp_prequeue is used in rx path.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_budget and netdev_budget are used in rx path (net_rx_action())
Move them into net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of spreading networking critical fields
all over the places, add a custom net_hotdata
structure so that we can precisely control its layout.
In this first patch, move :
- gro_normal_batch used in rx (GRO stack)
- offload_base used in rx and tx (GRO and TSO stacks)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This aligns broadcast sync_timeout with existing connection timeouts
which are 20 seconds long.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The ATS2851 controller erroneously reports support for the "Read
Encryption Key Length" HCI command. This makes it unable to connect
to any devices, since this command is issued by the kernel during the
connection process in response to an "Encryption Change" HCI event.
Add a new quirk (HCI_QUIRK_BROKEN_ENC_KEY_SIZE) to hint that the command
is unsupported, preventing it from interrupting the connection process.
This is the error log from btmon before this patch:
> HCI Event: Encryption Change (0x08) plen 4
Status: Success (0x00)
Handle: 2048 Address: ...
Encryption: Enabled with E0 (0x01)
< HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2
Handle: 2048 Address: ...
> HCI Event: Command Status (0x0f) plen 4
Read Encryption Key Size (0x05|0x0008) ncmd 1
Status: Unknown HCI Command (0x01)
Signed-off-by: Vinicius Peixoto <nukelet64@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In a few cases the stack may generate commands as responses to events
which would happen to overwrite the sent_cmd, so this attempts to store
the request in req_skb so even if sent_cmd is replaced with a new
command the pending request will remain in stored in req_skb.
Fixes: 6a98e3836f ("Bluetooth: Add helper for serialized HCI command execution")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to reassemble PA data for a Broadcast Sink
listening socket. This is needed in case the BASE is received
fragmented in multiple PA reports.
PA data is first reassembled inside the hcon, before the BASE
is extracted and stored inside the socket. The length of the
le_per_adv_data hcon array has been raised to 1650, to accommodate
the maximum PA data length that can come fragmented, according to
spec.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This creates a hcon instance at bis listen, before the PA sync
procedure is started.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If connection is still queued/pending in the cmd_sync queue it means no
command has been generated and it should be safe to just dequeue the
callback when it is being aborted.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the UAF on __hci_acl_create_connection_sync caused by
connection abortion, it uses the same logic as to LE_LINK which uses
hci_cmd_sync_cancel to prevent the callback to run if the connection is
abort prematurely.
Reported-by: syzbot+3f0a39be7a2035700868@syzkaller.appspotmail.com
Fixes: 45340097ce ("Bluetooth: hci_conn: Only do ACL connections sequentially")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This aligns the use socket sk_timeo as conn_timeout when initiating a
connection and then use it when scheduling the resulting HCI command,
that way the command is actually aborted synchronously thus not
blocking commands generated by hci_abort_conn_sync to inform the
controller the connection is to be aborted.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With the last commit we moved to using the hci_sync queue for "Create
Connection" requests, removing the need for retrying the paging after
finished/failed "Create Connection" requests and after the end of
inquiries.
hci_conn_check_pending() was used to trigger this retry, we can remove it
now.
Note that we can also remove the special handling for COMMAND_DISALLOWED
errors in the completion handler of "Create Connection", because "Create
Connection" requests are now always serialized.
This is somewhat reverting commit 4c67bc74f0 ("[Bluetooth] Support
concurrent connect requests").
With this, the BT_CONNECT2 state of ACL hci_conn objects should now be
back to meaning only one thing: That we received a "Connection Request"
from another device (see hci_conn_request_evt), but the response to that
is going to be deferred.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pretty much all bluetooth chipsets only support paging a single device at
a time, and if they don't reject a secondary "Create Connection" request
while another is still ongoing, they'll most likely serialize those
requests in the firware.
With commit 4c67bc74f0 ("[Bluetooth] Support concurrent connect
requests") we started adding some serialization of our own in case the
adapter returns "Command Disallowed" HCI error.
This commit was using the BT_CONNECT2 state for the serialization, this
state is also used for a few more things (most notably to indicate we're
waiting for an inquiry to cancel) and therefore a bit unreliable. Also
not all BT firwares would respond with "Command Disallowed" on too many
connection requests, some will also respond with "Hardware Failure"
(BCM4378), and others will error out later and send a "Connect Complete"
event with error "Rejected Limited Resources" (Marvell 88W8897).
We can clean things up a bit and also make the serialization more reliable
by using our hci_sync machinery to always do "Create Connection" requests
in a sequential manner.
This is very similar to what we're already doing for establishing LE
connections, and it works well there.
Note that this causes a test failure in mgmt-tester (test "Pair Device
- Power off 1") because the hci_abort_conn_sync() changes the error we
return on timeout of the "Create Connection". We'll fix this on the
mgmt-tester side by adjusting the expected error for the test.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If command has timed out call __hci_cmd_sync_cancel to notify the
hci_req since it will inevitably cause a timeout.
This also rework the code around __hci_cmd_sync_cancel since it was
wrongly assuming it needs to cancel timer as well, but sometimes the
timers have not been started or in fact they already had timed out in
which case they don't need to be cancel yet again.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We have error defines already, so let's use them.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a new state HCI_POWERING_DOWN that indicates that the device is
currently powering down, this will be useful for the next commit.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With commit cf75ad8b41 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED"),
the power off sequence got refactored so that this timeout was no longer
necessary, let's remove the leftover define from the header too.
Fixes: cf75ad8b41 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mac802154_llsec_key_del() can free resources of a key directly without
following the RCU rules for waiting before the end of a grace period. This
may lead to use-after-free in case llsec_lookup_key() is traversing the
list of keys in parallel with a key deletion:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 4 PID: 16000 at lib/refcount.c:25 refcount_warn_saturate+0x162/0x2a0
Modules linked in:
CPU: 4 PID: 16000 Comm: wpan-ping Not tainted 6.7.0 #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:refcount_warn_saturate+0x162/0x2a0
Call Trace:
<TASK>
llsec_lookup_key.isra.0+0x890/0x9e0
mac802154_llsec_encrypt+0x30c/0x9c0
ieee802154_subif_start_xmit+0x24/0x1e0
dev_hard_start_xmit+0x13e/0x690
sch_direct_xmit+0x2ae/0xbc0
__dev_queue_xmit+0x11dd/0x3c20
dgram_sendmsg+0x90b/0xd60
__sys_sendto+0x466/0x4c0
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0x45/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Also, ieee802154_llsec_key_entry structures are not freed by
mac802154_llsec_key_del():
unreferenced object 0xffff8880613b6980 (size 64):
comm "iwpan", pid 2176, jiffies 4294761134 (age 60.475s)
hex dump (first 32 bytes):
78 0d 8f 18 80 88 ff ff 22 01 00 00 00 00 ad de x.......".......
00 00 00 00 00 00 00 00 03 00 cd ab 00 00 00 00 ................
backtrace:
[<ffffffff81dcfa62>] __kmem_cache_alloc_node+0x1e2/0x2d0
[<ffffffff81c43865>] kmalloc_trace+0x25/0xc0
[<ffffffff88968b09>] mac802154_llsec_key_add+0xac9/0xcf0
[<ffffffff8896e41a>] ieee802154_add_llsec_key+0x5a/0x80
[<ffffffff8892adc6>] nl802154_add_llsec_key+0x426/0x5b0
[<ffffffff86ff293e>] genl_family_rcv_msg_doit+0x1fe/0x2f0
[<ffffffff86ff46d1>] genl_rcv_msg+0x531/0x7d0
[<ffffffff86fee7a9>] netlink_rcv_skb+0x169/0x440
[<ffffffff86ff1d88>] genl_rcv+0x28/0x40
[<ffffffff86fec15c>] netlink_unicast+0x53c/0x820
[<ffffffff86fecd8b>] netlink_sendmsg+0x93b/0xe60
[<ffffffff86b91b35>] ____sys_sendmsg+0xac5/0xca0
[<ffffffff86b9c3dd>] ___sys_sendmsg+0x11d/0x1c0
[<ffffffff86b9c65a>] __sys_sendmsg+0xfa/0x1d0
[<ffffffff88eadbf5>] do_syscall_64+0x45/0xf0
[<ffffffff890000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
Handle the proper resource release in the RCU callback function
mac802154_llsec_key_del_rcu().
Note that if llsec_lookup_key() finds a key, it gets a refcount via
llsec_key_get() and locally copies key id from key_entry (which is a
list element). So it's safe to call llsec_key_put() and free the list
entry after the RCU grace period elapses.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 5d637d5aab ("mac802154: add llsec structures and mutators")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Alexander Aring <aahringo@redhat.com>
Message-ID: <20240228163840.6667-1-pchelkin@ispras.ru>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Currently getsockopt does not support IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT, and we are unable to get the values of these two
socket options through getsockopt.
This patch adds getsockopt support for IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add helpers that phylib and phylink can use to manage EEE configuration
and determine whether the MAC should be permitted to use LPI based on
that configuration.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240302195306.3207716-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the nfc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-6-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the so-called GRO fast path is only enabled for
napi_frags_skb() callers.
After the prior patch, we no longer have to clear frag0 whenever
we pulled bytes to skb->head.
We therefore can initialize frag0 to skb->data so that GRO
fast path can be used in the following additional cases:
- Drivers using header split (populating skb->data with headers,
and having payload in one or more page fragments).
- Drivers not using any page frag (entire packet is in skb->data)
Add a likely() in skb_gro_may_pull() to help the compiler
to generate better code if possible.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Change skb_gro_network_header() to accept a const sk_buff
and to no longer check if frag0 is NULL or not.
This allows to remove skb_gro_frag0_invalidate()
which is seen in profiles when header-split is enabled.
sk_buff parameter is constified for skb_gro_header_fast(),
inet_gro_compute_pseudo() and ip6_gro_compute_pseudo().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
skb_gro_header_hard() is renamed to skb_gro_may_pull() to match
the convention used by common helpers like pskb_may_pull().
This means the condition is inverted:
if (skb_gro_header_hard(skb, hlen))
slow_path();
becomes:
if (!skb_gro_may_pull(skb, hlen))
slow_path();
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When doing CSA in multi-link, there really isn't a need to
stop transmissions entirely. Add a feature flag for drivers
to indicate they can handle quiet in CSA (be it by parsing
themselves, or by implementing drv_pre_channel_switch()),
to make that possible.
Also clean up the csa_block_tx handling: it clearly cannot
handle multi-link due to the way queues are stopped, move
it to the sdata. Drivers should be doing it themselves for
working properly during CSA in MLO anyway. Also rename it
to indicate that it reflects TX was blocked at mac80211.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095719.258439191541.I2469d206e2bf5cb244cfde2b4bbc2ae6d1cd3dd9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pass the link conf to the abort_channel_switch driver
method so the driver can handle things correctly.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095718.27f621106ddd.Iadd3d69b722ffe5934779a32a0e4e596a4e33ed4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For CSA to work correctly in multi-link scenarios, pass
the link_id to the relevant callbacks.
While at it, unify/deduplicate the tracing for them.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://msgid.link/20240228095718.b7726635c054.I0be5d00af4acb48cfbd23a9dbf067f9aeb66469d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we just want to determine the length of the fragmented
data, we basically need the same logic, and really we want
it to be _literally_ the same logic, so it cannot be out
of sync in any way.
Allow calling cfg80211_defragment_element() without an output
buffer, where it then just returns the required output size.
Also add this to the tests, just to exercise it, using the
pre-calculated length to really do the defragmentation, which
checks that this is sufficient.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://msgid.link/20240228095718.6d6565b9e3f2.Ib441903f4b8644ba04b1c766f90580ee6f54fc66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We sometimes need to check if a link is active, and this
is complicated by the fact that active_links has no bits
set when the vif isn't (acting as) an MLD. Add a small
new helper ieee80211_vif_link_active() to make that a bit
easier, and use it in a few places.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094901.688760aff5f7.I06892a503f5ecb9563fbd678d35d08daf7a044b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO, we need the link id in the GTK key to be given by
the driver after rekeying in wowlan, so add that.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094500.ce1bfc83a680.I43a6f8ab2804ee07116a37d5b9ec601b843464b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is now possible to disable BQL, but that causes the cpsw driver to break:
drivers/net/ethernet/ti/am65-cpsw-nuss.c:297:28: error: no member named 'dql' in 'struct netdev_queue'
297 | dql_avail(&netif_txq->dql),
There is already a helper function in net/sch_generic.h that could
be used to help here. Move its implementation into the common
linux/netdevice.h along with the other bql interfaces and change
both users over to the new interface.
Fixes: ea7f3cfaa5 ("net: bql: allow the config to be disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
idev->cnf.ignore_routes_with_linkdown can be used without any locks,
add appropriate annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
idev->cnf.forwarding and net->ipv6.devconf_all->forwarding
might be read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
