-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAml2lQweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0dcH/2yLU3IKlHSSgEDL
Qq3oBuRK/zoVOdy+CM+TmTdl2d1LnBd8J547xFStB7kVGf5mEkdFZdHLBSHRnKDf
ia1SGec06kyLpRX6x5T6FsfwOhkBmVsp59X0coM57QWxxenybugtzPvDO2TQ8/G4
buixJI0jJVgwRwXNzWB4n2W6FxNGui2A7gEN2mjtvkM2t/aDkiDjEqB8ve0pZJX9
4EWhxOgRFzwWgkd/bY+4wgXVXEt3GtI+3VvNncRqLIO00A/AnZOYmH4S2RQUDszD
IbyDscYYxloZcZMDXc3PN2WgD9DCGKuP3GpJGsOHbl0DN6JkqI9nwGsOFZKGVOeF
vbajwPE=
=iAOa
-----END PGP SIGNATURE-----
BackMerge tag 'v6.19-rc7' into drm-next
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some USB-C hubs and adapters have buggy firmware where multi-byte AUX
reads consistently timeout, while single-byte reads from the same address
work correctly.
Known affected devices that exhibit this issue:
- Lenovo USB-C to VGA adapter (VIA VL817 chipset)
idVendor=17ef, idProduct=7217
- Dell DA310 USB-C mobile adapter hub
idVendor=413c, idProduct=c010
Analysis of the failure pattern shows:
- Single-byte probes to 0xf0000 (LTTPR) succeed
- Single-byte probes to 0x00102 (TRAINING_AUX_RD_INTERVAL) succeed
- Multi-byte reads from 0x00000 (DPCD capabilities) timeout with -ETIMEDOUT
- Retrying does not help - the failure is consistent across all attempts
The issue appears to be a firmware bug in the AUX transaction handling
that specifically affects multi-byte reads.
Add a fallback mechanism in drm_dp_dpcd_read_data() that attempts
byte-by-byte reading when the normal multi-byte read fails. This
workaround only activates for adapters that fail the standard read path,
ensuring no impact on correctly functioning hardware.
Tested with:
- Lenovo USB-C to VGA adapter (VIA VL817) - now works with fallback
- Dell DA310 USB-C hub - now works with fallback
- Dell/Analogix Slimport adapter - continues to work with normal path
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251204024647.1462866-1-acelan.kao@canonical.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count. Add the helper
functions required for this.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-3-imre.deak@intel.com
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
Add helpers to query the DP DSC sink device's per-slice throughput as
well as a DSC branch device's overall throughput and line-width
capabilities.
v2 (Ville):
- Rename pixel_clock to peak_pixel_rate, document what the value means
in case of MST tiled displays.
- Fix name of drm_dp_dsc_branch_max_slice_throughput() to
drm_dp_dsc_sink_max_slice_throughput().
v3:
- Fix the DSC branch device minimum valid line width value from 2560
to 5120 pixels.
- Fix drm_dp_dsc_sink_max_slice_throughput()'s pixel_clock parameter
name to peak_pixel_rate in header file.
- Add handling for throughput mode 0 granular delta, defined by DP
Standard v2.1a.
v4:
- Remove the default switch case in
drm_dp_dsc_sink_max_slice_throughput(), which is unreachable in the
current code. (Ville)
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-and-tested-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250930182450.563016-3-imre.deak@intel.com
Some Synaptics MST branch devices have a problem decompressing a stream
with a compressed link-bpp higher than 12, if the pixel clock is higher
than ~50 % of the maximum throughput capability reported by the branch
device. The screen remains blank, or for some - mostly black content -
gets enabled, but may stil have jitter artifacts.
At least the following docking stations are affected, based on testing
both with any Intel devices or the UCD-500 reference device as a source:
- DELL WD19DCS, DELL WD19TB3, DELL WD22TB4
- ThinkPad 40AN
- HP G2
At least the following docking stations are free from this problem,
based on tests with a source/sink/mode etc. configuration matching the
test cases used above:
- DELL Dual Charge HD22Q, DELL WD25TB5
- ThinkPad 40B0
- Anker 565
All the affected devices have an older version of the Synaptics MST
branch device (Panamera), whereas all the non-affected docking stations
have a newer branch device (at least Synaptics Panamera with a higher HW
revision number and Synaptics Cayenne models). Add the required quirk
entries accordingly. The quirk will be handled by the i915/xe drivers in
a follow-up change.
The latest firmware version of the Synaptics branch device for all the
affected devices tested above is 5.7 (as reported at DPCD address
0x50a/0x50b). For the DELL devices this corresponds to the latest
01.00.14.01.A03 firmware package version of the docking station.
v2:
- Document the DP_DPCD_QUIRK_DSC_THROUGHPUT_BPP_LIMIT enum.
- Describe the quirk in more detail in the dpcd_quirk_list.
v3:
- s/Panarema/Panamera in the commit log.
Cc: dri-devel@lists.freedesktop.org
Reported-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reported-and-tested-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250930182450.563016-2-imre.deak@intel.com
Add small helpers (drm_dp_post_lt_adj_req_supported() and
drm_dp_post_lt_adj_req_in_progress()) to help with implementing
the POST_LT_ADJ_REQ sequence.
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250718120154.15492-3-ville.syrjala@linux.intel.com
Documentation for luminance_set for struct drm_edp_backlight_info
was missed which causes warnings.
Fixes: 2af612ad42 ("drm/dp: Introduce new member in drm_backlight_info")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@gmail.com>
Link: https://lore.kernel.org/r/20250701085054.746408-1-suraj.kandpal@intel.com
Change the argument type to u32 for the default level being sent
since it has to now account for luminance value which has to be
set for DP_EDP_PANEL_LUMINANCE_TARGET_VALUE.
--v2
-No need to typecast [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-10-suraj.kandpal@intel.com
Use u32 for level variable as one may need to pass value for
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
--v2
-Typecase is not needed [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-8-suraj.kandpal@intel.com
Change the current_level argument type to u32 from u16
since it can now carry the value which it gets from
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-6-suraj.kandpal@intel.com
Use u32 instead of u16 for max variable in drm_edp_backlight_info
since it can now hold max luminance range value which is u32.
We will set this max with max_luminance value when luminance_set is
true.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-5-suraj.kandpal@intel.com
Add new argument to drm_edp_backlight_init which gives the
max_luminance which will be needed to set the max values for
backlight.
--v2
-Use pass only max luminance instead of luminance_range_info struct
[Arun]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-4-suraj.kandpal@intel.com
Add bool argument in drm_edp_backlight init to provide the drivers
option to choose if they want to use luminance values to
manipulate brightness.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-3-suraj.kandpal@intel.com
Introduce luminance_set flag which indicates if we can manipulate
backlight using luminance value or not which is only possible
after eDP v1.5.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-2-suraj.kandpal@intel.com
Reading DPCD registers has side-effects and some of these can cause a
problem for instance during link training. Based on this it's better to
avoid the probing quirk done before each DPCD register read, limiting
this to the monitor which requires it. Add an EDID quirk for this. Leave
the quirk enabled by default, allowing it to be disabled after the
monitor is detected.
v2: Fix lockdep wrt. drm_dp_aux::hw_mutex when calling
drm_dp_dpcd_set_probe_quirk() with a dependent lock already held.
v3: Add a helper for determining if DPCD probing is needed. (Jani)
v4:
- s/drm_dp_dpcd_set_probe_quirk/drm_dp_dpcd_set_probe (Jani)
- Fix documentation of drm_dp_dpcd_set_probe().
- Add comment at the end of internal quirk entries.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250609125556.109538-1-imre.deak@intel.com
Some older NVIDIA and some newer NVIDIA hardware/firmware seems to
have issues with address only transactions (firmware rejects them).
Add an option to the core drm dp to avoid address only transactions,
This just puts the MOT flag removal on the last message of the transfer
and avoids the start of transfer transaction.
This with the flag set in nouveau, allows eDP probing on GB203 device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmgcsdUACgkQ+mJfZA7r
E8rYqAf/citknZ0aTAOw7+O8581v6/27BsmRYO8T2JvhHWr3RIOeowgyEQ9M3m6y
jBM5qIsGH0JOrDMVDjvuVlfm+JAPRxVABo3GXTpUIu94xszwco+5iQNnHBui0NrP
AnAauh/MZC6YKmTzNVBHW35N+JQJ9clmK6Rf5Bzb8pVP1bPRwRFSpgefHBeimRRY
qeQlqEVfvst5gkQiTe2b/5ydErPB7WfBY4WHGrgykBPt0+3t7Zln3Dqbdm9vB7+p
zEHXQNvX75KGFimUgCf7mU2Hoov0LI1/cazeG1dbv6gczXOUySwIKRIuqKNJ6XsG
PSV0X8Hc1ppL4Sp1Oe/WAdwE2k/xxw==
=rvsI
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-05-08' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
Unify the function to calculate the link symbol cycles for both dsc and
non-dsc case and export the function so that it can be used in the
respective platform display drivers for other calculations.
v2: unify the fn for both dsc and non-dsc case (Imre)
v3: rename drm_dp_link_symbol_cycles to drm_dp_link_data_symbol_cycles
retain slice_eoc_cycles as is (Imre)
v4: Expose only drm_dp_link_symbol_cycles() (Imre)
v6: Add slice pixels which was removed unknowingly (Vinod)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250424-hblank-v7-1-8b002f1506cc@intel.com
The helper functions drm_dp_link_power_up/down were moved to Tegra
DRM in commit 9a42c7c647 ("drm/tegra: Move drm_dp_link helpers to Tegra DRM")".
Now since more and more users are duplicating the same code in their
own drivers, it's time to make them as DRM DP common helpers again.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318063452.4983-1-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Existing DPCD access functions return an error code or the number of
bytes being read / write in case of partial access. However a lot of
drivers either (incorrectly) ignore partial access or mishandle error
codes. In other cases this results in a boilerplate code which compares
returned value with the size.
Implement new set of DPCD access helpers, which ignore partial access,
always return 0 or an error code.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-1-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
According to the DisplayPort standard, LTTPRs have two operating
modes:
- non-transparent - it replies to DPCD LTTPR field specific AUX
requests, while passes through all other AUX requests
- transparent - it passes through all AUX requests.
Switching between this two modes is done by the DPTX by issuing
an AUX write to the DPCD PHY_REPEATER_MODE register.
Add a generic helper that allows switching between these modes.
Also add a generic wrapper for the helper that handles the explicit
disabling of non-transparent mode and its disable->enable sequence
mentioned in the DP Standard v2.0 section 3.6.6.1. Do this in order
to move this handling out of the vendor specific driver implementation
into the generic framework.
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-1-c865d0e56d6e@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Extended wake timeout request helps to give additional
time by reading the DPCD register through which sink requests the
minimal amount of time required to wake the sink up.
Source device shall keep retying the AUX tansaction till the
extended timeout that is being granted for LTTPRs from the
sink device.
--v2
-Add documentation [Dmitry]
Spec: DP v2.1 Section 3.6.12.3
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122053358.1545039-3-suraj.kandpal@intel.com
SST with 128b/132b channel coding needs this too. Extract to a separate
helper, independent of MST.
Pass timeout in as a parameter, anticipating that we can reduce the
timeout for SST.
v2: Clean up kernel-doc a bit
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/459fd3e96a55a8ea8ada8d27d93eaa24c235f9c1.1733238941.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add target_rr_divider to structure representing AS SDP.
It is valid only in FAVT mode, sink device ignores the bit in AVT
mode.
--v2:
- Update commit header and send patch to dri-devel.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610072203.24956-6-mitulkumar.ajitkumar.golani@intel.com
It fixes the following warnings when
the kernel documentation is generated:
./include/drm/display/drm_dp_helper.h:126:
warning: Function parameter or struct member
'mode' not described in 'drm_dp_as_sdp'
./include/drm/display/drm_dp_helper.h:126:
warning: Excess struct member 'operation_mode'
description in 'drm_dp_as_sdp'
Signed-off-by: MarileneGarcia <marilene.agarcia@gmail.com>
Fixes: 0bbb8f594e ("drm/dp: Add Adaptive Sync SDP logging")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240405141640.09b0bdbf@canb.auug.org.au
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240519031027.433751-1-marilene.agarcia@gmail.com
Factor out a function to check for 128b/132b channel coding support used
by a follow-up patch in the patchset.
v2: s/drm_dp_uhbr_channel_coding_supported()/drm_dp128b132b_supported()
(Jani)
Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417141936.457796-1-imre.deak@intel.com
- Fix documentation of DP tunnel functions (Imre)
- DP MST read sideband messaging cap (Jani)
- Preparation patches for Adaptive Sync SDP Support for DP (Mitul)
Driver Changes:
i915 core (non-display):
- Documentation improvements (Nirmoy)
- Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas)
- Do not print 'pxp init failed with 0' when it succeed (Jose)
- Clean-up, including removal of dead code for unsupported platforms (Lucas)
- Adding new DG2 PCI ID (Ravi)
{i915,xe} display:
- Spelling fix (Colin Ian)
- Document CDCLK components (Gustavo)
- Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala)
- BIOS/VBT/opregion related refactor (Jani, Ville, RK)
- Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe)
- Digital port related refactor/clean-up (Ville)
- Fix 2s boot time regression on DP panel replay init (Animesh)
- Remove redundant drm_rect_visible() overlay use (Arthur)
- DSC HW state readout fixes (Imre)
- Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville)
- Disable AuxCCS framebuffers if built for Xe (Juha-Pekka)
- Fix DSI init order (Ville)
- DRRS related refactor and fixes (Bhanuprakash)
- Fix DSB vblank waits with VRR (Ville)
- General improvements on register name and use of REG_BIT (Ville)
- Some display power well related improvements (Ville)
- FBC changes for better w/a handling (Ville)
- Make crtc disable more atomic (Ville)
- Fix hwmon locking inversion in sysfs getter (Janusz)
- Increase DP idle pattern wait timeout to 2ms (Shekhar)
- PSR related fixes and improvents (Jouni)
- Start using container_of_const() for some extra const safety (Ville)
- Use drm_printer more on display code (Ville)
- Fix Jasper Lake boot freeze (Jonathon)
- Update Pipe src size check in skl_update_scaler (Ankit)
- Enable MST mode for 128b/132b single-stream sideband (Jani)
- Pass encoder around more for port/phy checks (Jani)
- Some initial work to make display code more independent from i915 (Jani)
- Pre-populate the cursor physical dma address (Ville)
- Do not bump min backlight brightness to max on enable (Gareth)
- Fix MTL supported DP rates - removal of UHBR13.5 (Arun)
- Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit)
- Bigjoiner modeset sequence redesign and MST support (Ville)
- Enable Adaptive Sync SDP Support for DP (Mitul)
- Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav)
- HDCP related fixes (Suraj)
- Fix i915_display_info debugfs when connectors are not active (Ville)
- Clean up on Xe compat layer (Jani)
- Add jitter WAs for MST/FEC/DSC links (Imre)
- DMC wakelock implementation (Luca)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r
E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu
bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF
02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv
8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ
ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx
7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ==
=JvZN
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2024-04-17-1' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-next
Core Changes (DRM):
- Fix documentation of DP tunnel functions (Imre)
- DP MST read sideband messaging cap (Jani)
- Preparation patches for Adaptive Sync SDP Support for DP (Mitul)
Driver Changes:
i915 core (non-display):
- Documentation improvements (Nirmoy)
- Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas)
- Do not print 'pxp init failed with 0' when it succeed (Jose)
- Clean-up, including removal of dead code for unsupported platforms (Lucas)
- Adding new DG2 PCI ID (Ravi)
{i915,xe} display:
- Spelling fix (Colin Ian)
- Document CDCLK components (Gustavo)
- Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala)
- BIOS/VBT/opregion related refactor (Jani, Ville, RK)
- Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe)
- Digital port related refactor/clean-up (Ville)
- Fix 2s boot time regression on DP panel replay init (Animesh)
- Remove redundant drm_rect_visible() overlay use (Arthur)
- DSC HW state readout fixes (Imre)
- Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville)
- Disable AuxCCS framebuffers if built for Xe (Juha-Pekka)
- Fix DSI init order (Ville)
- DRRS related refactor and fixes (Bhanuprakash)
- Fix DSB vblank waits with VRR (Ville)
- General improvements on register name and use of REG_BIT (Ville)
- Some display power well related improvements (Ville)
- FBC changes for better w/a handling (Ville)
- Make crtc disable more atomic (Ville)
- Fix hwmon locking inversion in sysfs getter (Janusz)
- Increase DP idle pattern wait timeout to 2ms (Shekhar)
- PSR related fixes and improvents (Jouni)
- Start using container_of_const() for some extra const safety (Ville)
- Use drm_printer more on display code (Ville)
- Fix Jasper Lake boot freeze (Jonathon)
- Update Pipe src size check in skl_update_scaler (Ankit)
- Enable MST mode for 128b/132b single-stream sideband (Jani)
- Pass encoder around more for port/phy checks (Jani)
- Some initial work to make display code more independent from i915 (Jani)
- Pre-populate the cursor physical dma address (Ville)
- Do not bump min backlight brightness to max on enable (Gareth)
- Fix MTL supported DP rates - removal of UHBR13.5 (Arun)
- Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit)
- Bigjoiner modeset sequence redesign and MST support (Ville)
- Enable Adaptive Sync SDP Support for DP (Mitul)
- Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav)
- HDCP related fixes (Suraj)
- Fix i915_display_info debugfs when connectors are not active (Ville)
- Clean up on Xe compat layer (Jani)
- Add jitter WAs for MST/FEC/DSC links (Imre)
- DMC wakelock implementation (Luca)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r
# E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu
# bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF
# 02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv
# 8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ
# ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx
# 7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ==
# =JvZN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Apr 2024 23:22:09 AEST
# gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown]
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zh_Q72gYKMMbge9A@intel.com
Add structure representing Adaptive Sync Secondary Data Packet (AS SDP).
Also, add Adaptive Sync SDP logging in drm_dp_helper.c to facilitate
debugging.
--v2:
- Update logging. [Jani, Ankit]
- Use 'as_sdp' instead of 'async' [Ankit]
- Correct define placeholders to where they are actually used. [Jani]
- Update members in 'as_sdp' structure to make it uniform. [Jani]
--v3:
- Added changes to dri-devel mailing list. No code changes.
--v4:
- Instead of directly using operation mode, use an enum to accommodate
all operation modes (Ankit).
--v5:
Nit-pick changes to commit message.
--v6:
- Add correct place holder and name change for AS_SDP_OP_MODE.
- Separate i915 changes from drm changes.
- Remove extra lines.
--v7:
- Add drm/dp in subject line (Ankit)
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-3-mitulkumar.ajitkumar.golani@intel.com
Add an API that indicates support for Adaptive Sync SDP in
the sink, which can be utilized by the rest of the DP programming.
--v1:
- Format commit message properly.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-2-mitulkumar.ajitkumar.golani@intel.com
While most display helpers Kconfig symbols have the DRM_DISPLAY prefix,
the DisplayPort CEC tunnelling implementation uses CONFIG_DRM_DISPLAY_DP_AUX_CEC.
Since the number of users is limited, we can easily rename it to make it
consistent.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-4-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
In response to my patch removing the "wait for HPD" logic at the
beginning of the MSM DP transfer() callback [1], we had some debate
about what the "This is an optional function" meant in the
documentation of the wait_hpd_asserted() callback. Let's clarify.
As talked about in the MSM DP patch [1], before wait_hpd_asserted()
was introduced there was no great way for panel drivers to wait for
HPD in the case that the "built-in" HPD signal was used. Panel drivers
could only wait for HPD if a GPIO was used. At the time, we ended up
just saying that if we were using the "built-in" HPD signal that DP
AUX controllers needed to wait for HPD themselves at the beginning of
their transfer() callback. The fact that the wait for HPD at the
beginning of transfer() was awkward/problematic was the whole reason
wait_hpd_asserted() was added.
Let's make it obvious that if a DP AUX controller implements
wait_hpd_asserted() that they don't need a loop waiting for HPD at the
start of their transfer() function. We'll still allow DP controllers
to work the old way but mark it as deprecated.
[1] https://lore.kernel.org/r/20240315143621.v2.3.I535606f6d4f7e3e5588bb75c55996f61980183cd@changeid
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319135836.v2.1.I521dad0693cc24fe4dd14cba0c7048d94f5b6b41@changeid
If an eDP panel is not powered on then any attempts to talk to it over
the DP AUX channel will timeout. Unfortunately these attempts may be
quite slow. Userspace can initiate these attempts either via a
/dev/drm_dp_auxN device or via the created i2c device.
Making the DP AUX drivers timeout faster is a difficult proposition.
In theory we could just poll the panel's HPD line in the AUX transfer
function and immediately return an error there. However, this is
easier said than done. For one thing, there's no hard requirement to
hook the HPD line up for eDP panels and it's OK to just delay a fixed
amount. For another thing, the HPD line may not be fast to probe. On
parade-ps8640 we need to wait for the bridge chip's firmware to boot
before we can get the HPD line and this is a slow process.
The fact that the transfers are taking so long to timeout is causing
real problems. The open source fwupd daemon sometimes scans DP busses
looking for devices whose firmware need updating. If it happens to
scan while a panel is turned off this scan can take a long time. The
fwupd daemon could try to be smarter and only scan when eDP panels are
turned on, but we can also improve the behavior in the kernel.
Let's let eDP panels drivers specify that a panel is turned off and
then modify the common AUX transfer code not to attempt a transfer in
this case.
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Eizan Miyamoto <eizan@chromium.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202141109.1.I24277520ac754ea538c9b14578edc94e1df11b48@changeid
Copy intel_dp_max_data_rate() to DRM core. It will be needed by a
follow-up DP tunnel patch, checking the maximum rate the DPRX (sink)
supports. Accordingly use the drm_dp_max_dprx_data_rate() name for
clarity. This patchset will also switch calling the new DRM function
in i915 instead of intel_dp_max_data_rate().
While at it simplify the function documentation/comments, removing
parts described already by drm_dp_bw_channel_coding_efficiency().
v2: (Ville)
- Remove max_link_rate_kbps.
- Simplify the function documentation.
v3:
- Rebased on latest drm-tip.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-1-imre.deak@intel.com
YUV420 format is supported only in the VSC SDP packet and not through
MSA. Hence add an API which indicates the sink support which can be used
by the rest of the DP programming.
changes in v5:
- rebased on top of drm-tip
changes in v4:
- bail out early if dpcd rev check fails
changes in v3:
- fix the commit title prefix to drm/dp
- get rid of redundant !!
- break out this change from series [1] to get acks from drm core
maintainers
Changes in v2:
- Move VSC SDP support check API from dp_panel.c to
drm_dp_helper.c
[1]: https://patchwork.freedesktop.org/series/129180/
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215191556.3227259-1-quic_abhinavk@quicinc.com
Currently the size parameter of drm_dp_vsc_sdp_pack() is always
the size of struct dp_sdp. Hence lets drop this parameter and
use sizeof() directly.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220195348.1270854-2-quic_abhinavk@quicinc.com
intel_dp_vsc_sdp_pack() can be re-used by other DRM drivers as well.
Lets move this to drm_dp_helper to achieve this.
changes in v2:
- rebased on top of drm-tip
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220195348.1270854-1-quic_abhinavk@quicinc.com
The current way of calculating the pbn_div value, the link BW per each
MTP slot, worked only for DP 1.4 link rates. Fix things up for UHBR
rates calculating with the correct channel coding efficiency based on
the link rate.
v2:
- Return the fractional pbn_div value from drm_dp_get_vc_payload_bw().
v3:
- Fix rounding up quotient while calculating req_slots. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117150929.1767227-1-imre.deak@intel.com
