Define macros used for decoding DSC max bpp delta values
from the sink DPCD. This includes per-format masks for
RGB/YCbCr444 and YCbCr420, as well as definitions for delta
scaling and the YCbCr420 bit shift. Also add version_1 as
suffix to MAX_DELTA_BPP.
v2: Move constants under 0x6E register. [Ankit]
Add mask for Native 422 also. [Ankit]
v3: Rename _DSC_NATIVE4222 to _DSC_NATIVE_YCbCr422. [Ankit]
v4: Move Version_1 edit ti patch_1. [Ankit]
Add shift mask for native also. [sashiko]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-4-nemesa.garg@intel.com
Rename DP_DSC_RGB_YCbCr420_MAX_BPP_DELTA_MASK to
DP_DSC_NATIVE_YCbCr420_MAX_BPP_DELTA_MASK to align with
the DP DSC specification, where the field represents the
native YCbCr 4:2:0 format.
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-3-nemesa.garg@intel.com
The dsc max bpp delta masks were incorrectly placed
under the DP_DSC_BITS_PER_PIXEL_INC(0x06F) register.
Move these under correct DP_DSC_MAX_BPP_DELTA(0x06E)
register.
v2: Separate patch for correcting register. [Ankit]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-2-nemesa.garg@intel.com
__drm_atomic_helper_connector_hdmi_reset() is typically used to
initialize a newly allocated drm_connector_state when the connector is
using the HDMI helpers, and is being called by the
drm_connector_funcs.reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_connector_state instance, we will need to call
__drm_atomic_helper_connector_hdmi_reset() from both the reset and
atomic_create hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_connector_hdmi_reset() to
__drm_atomic_helper_connector_hdmi_state_init().
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-14-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add new field in struct drm_dp_as_sdp to store coasting vtotal.
This is used by the sinks that support Panel Replay and Asynchronous
timing during PR Active to derive refresh rate, when AS SDP transmission
is stopped by the source.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-7-ankit.k.nautiyal@intel.com
Add additional DPCDs required to be configured to support VRR with Panel
Replay. These DPCDs are specifically required for configuring Adaptive Sync
SDP and are introduced in DP v2.1.
v2:
- Correct the shift for the bits. (Ville)
- Add DP_PR_ prefix for the PR-related fields.
v3:
- Use macro values in their shifted form to match the convention. (Ville)
v4:
- Add macro for the mask. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-5-ankit.k.nautiyal@intel.com
DP v2.1 introduced support for sending AS SDP payload bytes for FAVT.
Add the relavant bits for the same.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-4-ankit.k.nautiyal@intel.com
Align the DP_DPRX feature enumeration macros for better readability and
consistency, and use the BIT() macro instead of open-coded shifts.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-3-ankit.k.nautiyal@intel.com
The AS SDP payload field masks were misnamed and placed under the DPRX
feature enumeration list. These are not DPRX capability bits, but are
payload field masks for the Adaptive Sync SDP.
Relocate both masks next to the AS SDP definitions.
Update users to the corrected names. No functional change.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-2-ankit.k.nautiyal@intel.com
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
Add api to check panel replay optimization supported or not to
drm-core DP tunneling framework which can be used by other driver
as well.
v2: Split generic drm changes from Intel specific changes. [Jouni]
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Suggested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Acked-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260330133620.3750559-2-animesh.manna@intel.com
The hdmi_colorspace enum was defined to represent the colorspace value
of the HDMI infoframes. It was later used by some HDMI drivers to
express the output format they should be setting up.
During the introduction of the HDMI helpers, it then was used to
represent it in the drm_connector_hdmi_state structure.
However, it's always been somewhat redundant with the DRM_COLOR_FORMAT_*
defines, and now with the drm_output_color_format enum. Let's
consolidate around drm_output_color_format in drm_connector_hdmi_state
to facilitate the current effort to provide a global output format
selection mechanism.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-14-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAml2lQweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0dcH/2yLU3IKlHSSgEDL
Qq3oBuRK/zoVOdy+CM+TmTdl2d1LnBd8J547xFStB7kVGf5mEkdFZdHLBSHRnKDf
ia1SGec06kyLpRX6x5T6FsfwOhkBmVsp59X0coM57QWxxenybugtzPvDO2TQ8/G4
buixJI0jJVgwRwXNzWB4n2W6FxNGui2A7gEN2mjtvkM2t/aDkiDjEqB8ve0pZJX9
4EWhxOgRFzwWgkd/bY+4wgXVXEt3GtI+3VvNncRqLIO00A/AnZOYmH4S2RQUDszD
IbyDscYYxloZcZMDXc3PN2WgD9DCGKuP3GpJGsOHbl0DN6JkqI9nwGsOFZKGVOeF
vbajwPE=
=iAOa
-----END PGP SIGNATURE-----
BackMerge tag 'v6.19-rc7' into drm-next
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some USB-C hubs and adapters have buggy firmware where multi-byte AUX
reads consistently timeout, while single-byte reads from the same address
work correctly.
Known affected devices that exhibit this issue:
- Lenovo USB-C to VGA adapter (VIA VL817 chipset)
idVendor=17ef, idProduct=7217
- Dell DA310 USB-C mobile adapter hub
idVendor=413c, idProduct=c010
Analysis of the failure pattern shows:
- Single-byte probes to 0xf0000 (LTTPR) succeed
- Single-byte probes to 0x00102 (TRAINING_AUX_RD_INTERVAL) succeed
- Multi-byte reads from 0x00000 (DPCD capabilities) timeout with -ETIMEDOUT
- Retrying does not help - the failure is consistent across all attempts
The issue appears to be a firmware bug in the AUX transaction handling
that specifically affects multi-byte reads.
Add a fallback mechanism in drm_dp_dpcd_read_data() that attempts
byte-by-byte reading when the normal multi-byte read fails. This
workaround only activates for adapters that fail the standard read path,
ensuring no impact on correctly functioning hardware.
Tested with:
- Lenovo USB-C to VGA adapter (VIA VL817) - now works with fallback
- Dell DA310 USB-C hub - now works with fallback
- Dell/Analogix Slimport adapter - continues to work with normal path
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251204024647.1462866-1-acelan.kao@canonical.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count. Add the helper
functions required for this.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-3-imre.deak@intel.com
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
Add helpers to query the DP DSC sink device's per-slice throughput as
well as a DSC branch device's overall throughput and line-width
capabilities.
v2 (Ville):
- Rename pixel_clock to peak_pixel_rate, document what the value means
in case of MST tiled displays.
- Fix name of drm_dp_dsc_branch_max_slice_throughput() to
drm_dp_dsc_sink_max_slice_throughput().
v3:
- Fix the DSC branch device minimum valid line width value from 2560
to 5120 pixels.
- Fix drm_dp_dsc_sink_max_slice_throughput()'s pixel_clock parameter
name to peak_pixel_rate in header file.
- Add handling for throughput mode 0 granular delta, defined by DP
Standard v2.1a.
v4:
- Remove the default switch case in
drm_dp_dsc_sink_max_slice_throughput(), which is unreachable in the
current code. (Ville)
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-and-tested-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250930182450.563016-3-imre.deak@intel.com
Some Synaptics MST branch devices have a problem decompressing a stream
with a compressed link-bpp higher than 12, if the pixel clock is higher
than ~50 % of the maximum throughput capability reported by the branch
device. The screen remains blank, or for some - mostly black content -
gets enabled, but may stil have jitter artifacts.
At least the following docking stations are affected, based on testing
both with any Intel devices or the UCD-500 reference device as a source:
- DELL WD19DCS, DELL WD19TB3, DELL WD22TB4
- ThinkPad 40AN
- HP G2
At least the following docking stations are free from this problem,
based on tests with a source/sink/mode etc. configuration matching the
test cases used above:
- DELL Dual Charge HD22Q, DELL WD25TB5
- ThinkPad 40B0
- Anker 565
All the affected devices have an older version of the Synaptics MST
branch device (Panamera), whereas all the non-affected docking stations
have a newer branch device (at least Synaptics Panamera with a higher HW
revision number and Synaptics Cayenne models). Add the required quirk
entries accordingly. The quirk will be handled by the i915/xe drivers in
a follow-up change.
The latest firmware version of the Synaptics branch device for all the
affected devices tested above is 5.7 (as reported at DPCD address
0x50a/0x50b). For the DELL devices this corresponds to the latest
01.00.14.01.A03 firmware package version of the docking station.
v2:
- Document the DP_DPCD_QUIRK_DSC_THROUGHPUT_BPP_LIMIT enum.
- Describe the quirk in more detail in the dpcd_quirk_list.
v3:
- s/Panarema/Panamera in the commit log.
Cc: dri-devel@lists.freedesktop.org
Reported-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reported-and-tested-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250930182450.563016-2-imre.deak@intel.com
Add small helpers (drm_dp_post_lt_adj_req_supported() and
drm_dp_post_lt_adj_req_in_progress()) to help with implementing
the POST_LT_ADJ_REQ sequence.
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250718120154.15492-3-ville.syrjala@linux.intel.com
Documentation for luminance_set for struct drm_edp_backlight_info
was missed which causes warnings.
Fixes: 2af612ad42 ("drm/dp: Introduce new member in drm_backlight_info")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@gmail.com>
Link: https://lore.kernel.org/r/20250701085054.746408-1-suraj.kandpal@intel.com
Change the argument type to u32 for the default level being sent
since it has to now account for luminance value which has to be
set for DP_EDP_PANEL_LUMINANCE_TARGET_VALUE.
--v2
-No need to typecast [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-10-suraj.kandpal@intel.com
Use u32 for level variable as one may need to pass value for
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
--v2
-Typecase is not needed [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-8-suraj.kandpal@intel.com
Change the current_level argument type to u32 from u16
since it can now carry the value which it gets from
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-6-suraj.kandpal@intel.com
Use u32 instead of u16 for max variable in drm_edp_backlight_info
since it can now hold max luminance range value which is u32.
We will set this max with max_luminance value when luminance_set is
true.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-5-suraj.kandpal@intel.com
Add new argument to drm_edp_backlight_init which gives the
max_luminance which will be needed to set the max values for
backlight.
--v2
-Use pass only max luminance instead of luminance_range_info struct
[Arun]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-4-suraj.kandpal@intel.com
Add bool argument in drm_edp_backlight init to provide the drivers
option to choose if they want to use luminance values to
manipulate brightness.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-3-suraj.kandpal@intel.com
Introduce luminance_set flag which indicates if we can manipulate
backlight using luminance value or not which is only possible
after eDP v1.5.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-2-suraj.kandpal@intel.com
drm/i915 feature pull for v6.17:
Features and functionality:
- Add support for DSC fractional link bpp on DP MST (Imre)
- Add support for simultaneous Panel Replay and Adaptive Sync (Jouni)
- Add support for PTL+ double buffered LUT registers (Chaitanya, Ville)
- Add PIPEDMC event handling in preparation for flip queue (Ville)
Refactoring and cleanups:
- Rename lots of DPLL interfaces to unify them (Suraj)
- Allocate struct intel_display dynamically (Jani)
- Abstract VLV IOSF sideband better (Jani)
- Use str_true_false() helper (Yumeng Fang)
- Refactor DSB code in preparation for flip queue (Ville)
- Use drm_modeset_lock_assert_held() instead of open coding (Luca)
- Remove unused arg from skl_scaler_get_filter_select() (Luca)
- Split out a separate display register header (Jani)
- Abstract DRAM detection better (Jani)
- Convert LPT/WPT SBI sideband to struct intel_display (Jani)
Fixes:
- Fix DSI HS command dispatch with forced pipeline flush (Gareth Yu)
- Fix BMG and LNL+ DP adaptive sync SDP programming (Ankit)
- Fix error path for xe display workqueue allocation (Haoxiang Li)
- Disable DP AUX access probe where not required (Imre)
- Fix DKL PHY access if the port is invalid (Luca)
- Fix PSR2_SU_STATUS access on ADL+ (Jouni)
- Add sanity checks for porch and sync on BXT/GLK DSI (Ville)
DRM core changes:
- Change AUX DPCD access probe address (Imre)
- Refactor EDID quirks, amd make them available to drivers (Imre)
- Add quirk for DPCD access probe (Imre)
- Add DPCD definitions for Panel Replay capabilities (Jouni)
Merges:
- Backmerges to sync with v6.15-rcs and v6.16-rc1 (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/fff9f231850ed410bd81b53de43eff0b98240d31@intel.com
Reading DPCD registers has side-effects and some of these can cause a
problem for instance during link training. Based on this it's better to
avoid the probing quirk done before each DPCD register read, limiting
this to the monitor which requires it. Add an EDID quirk for this. Leave
the quirk enabled by default, allowing it to be disabled after the
monitor is detected.
v2: Fix lockdep wrt. drm_dp_aux::hw_mutex when calling
drm_dp_dpcd_set_probe_quirk() with a dependent lock already held.
v3: Add a helper for determining if DPCD probing is needed. (Jani)
v4:
- s/drm_dp_dpcd_set_probe_quirk/drm_dp_dpcd_set_probe (Jani)
- Fix documentation of drm_dp_dpcd_set_probe().
- Add comment at the end of internal quirk entries.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250609125556.109538-1-imre.deak@intel.com
Add generic CEC helpers to be used by HDMI drivers. Both notifier and
and adapter are supported for registration. Once registered, the driver
can call common set of functions to update physical address, to
invalidate it or to unregister CEC data. Unlike drm_connector_cec_funcs
(which provides interface common to all implementations, including, but
not limited to the CEC adapter, CEC notifier, CEC pin-based adapter,
etc) the struct drm_connector_hdmi_cec_adapter_ops provides callbacks
specific to the CEC adapter implementations.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-5-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
By default HDMI codec registers all formats supported on the I2S bus.
Allow bridges (and connectors) to limit the list of the PCM formats
supported by the HDMI codec.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-2-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Some older NVIDIA and some newer NVIDIA hardware/firmware seems to
have issues with address only transactions (firmware rejects them).
Add an option to the core drm dp to avoid address only transactions,
This just puts the MOT flag removal on the last message of the transfer
and avoids the start of transfer transaction.
This with the flag set in nouveau, allows eDP probing on GB203 device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmgcsdUACgkQ+mJfZA7r
E8rYqAf/citknZ0aTAOw7+O8581v6/27BsmRYO8T2JvhHWr3RIOeowgyEQ9M3m6y
jBM5qIsGH0JOrDMVDjvuVlfm+JAPRxVABo3GXTpUIu94xszwco+5iQNnHBui0NrP
AnAauh/MZC6YKmTzNVBHW35N+JQJ9clmK6Rf5Bzb8pVP1bPRwRFSpgefHBeimRRY
qeQlqEVfvst5gkQiTe2b/5ydErPB7WfBY4WHGrgykBPt0+3t7Zln3Dqbdm9vB7+p
zEHXQNvX75KGFimUgCf7mU2Hoov0LI1/cazeG1dbv6gczXOUySwIKRIuqKNJ6XsG
PSV0X8Hc1ppL4Sp1Oe/WAdwE2k/xxw==
=rvsI
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-05-08' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
Unify the function to calculate the link symbol cycles for both dsc and
non-dsc case and export the function so that it can be used in the
respective platform display drivers for other calculations.
v2: unify the fn for both dsc and non-dsc case (Imre)
v3: rename drm_dp_link_symbol_cycles to drm_dp_link_data_symbol_cycles
retain slice_eoc_cycles as is (Imre)
v4: Expose only drm_dp_link_symbol_cycles() (Imre)
v6: Add slice pixels which was removed unknowingly (Vinod)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250424-hblank-v7-1-8b002f1506cc@intel.com
HDMI standard defines recommended N and CTS values for Audio Clock
Regeneration. Currently each driver implements those, frequently in
somewhat unique way. Provide a generic helper for getting those values
to be used by the HDMI drivers.
The helper is added to drm_hdmi_helper.c rather than drm_hdmi_audio.c
since HDMI drivers can be using this helper function even without
switching to DRM HDMI Audio helpers.
Note: currently this only handles the values per HDMI 1.4b Section 7.2
and HDMI 2.0 Section 9.2.1. Later the table can be expanded to
accommodate for Deep Color TMDS char rates per HDMI 1.4 Appendix D
and/or HDMI 2.0 / 2.1 Appendix C).
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250408-drm-hdmi-acr-v2-1-dee7298ab1af@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
