session_fd_check() walks the per-inode m_op_list during durable-handle
session teardown and sets op->conn = NULL for every opinfo whose conn
matched the closing session's connection. The matching opinfo, however,
stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list
because destroy_lease_table() only runs on full TCP-connection teardown,
not on SESSION_LOGOFF.
If the same TCP connection then negotiates a fresh session with the
same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and
is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a
lease context on a different inode, find_same_lease_key() walks
lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(),
which unconditionally dereferences opinfo->conn->ClientGUID. The conn
pointer is NULL and the kernel panics.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000069: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:bcmp+0x5b/0x230
Call Trace:
compare_guid_key+0x4b/0xd0
find_same_lease_key+0x324/0x690
smb2_open+0x6aea/0x8e60
handle_ksmbd_work+0x796/0xee0
...
Faulting address 0x348 is the offset of ClientGUID within struct
ksmbd_conn, confirming opinfo->conn was NULL.
Read opinfo->conn once and bail out if it has been cleared by a
concurrent session_fd_check(). A half-detached opinfo cannot be the
owner of an active lease, so returning 0 is the correct match result.
Fixes: c8efcc7861 ("ksmbd: add support for durable handles v1/v2")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Laratro <research@aradex.io>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_conn_free() is one of four sites that can observe the last
refcount drop of a struct ksmbd_conn. The other three
fs/smb/server/connection.c ksmbd_conn_r_count_dec()
fs/smb/server/oplock.c __free_opinfo()
fs/smb/server/vfs_cache.c session_fd_check()
end the conn with a bare kfree(), skipping
ida_destroy(&conn->async_ida) and
conn->transport->ops->free_transport(conn->transport). Whenever one
of them is the last putter, the embedded async_ida and the entire
transport struct leak -- for TCP, that is also the struct socket and
the kvec iov.
__free_opinfo() being a final putter is not theoretical. opinfo_put()
queues the callback via call_rcu(&opinfo->rcu, free_opinfo_rcu), so
ksmbd_server_terminate_conn() can deposit N opinfo releases in RCU and
have ksmbd_conn_free() run in the handler thread before any of them
fire. ksmbd_conn_free() then observes refcnt > 0 and short-circuits;
the last RCU-delivered __free_opinfo() falls onto its bare kfree(conn)
branch and the transport is lost.
A/B validation in a QEMU/virtme guest, mounting //127.0.0.1/testshare:
each iteration holds 8 files open via sleep processes, force-closes
TCP with "ss -K sport = :445", kills the holders, lazy-umounts;
repeated 10 times, then ksmbd shutdown and kmemleak scan.
state conn_alloc conn_free tcp_free opi_rcu kmemleak
---------- ---------- --------- -------- ------- --------
pre-patch 20 20 10 160 7
with patch 20 20 20 160 0
Pre-patch conn_free=20 with tcp_free=10 directly demonstrates the
bare-kfree paths skipping transport cleanup; kmemleak backtraces point
into struct tcp_transport / iov. With this patch tcp_free matches
conn_free at 20/20 and kmemleak is clean.
Move the per-struct final release into __ksmbd_conn_release_work() and
route the three bare-kfree final-put sites through a new
ksmbd_conn_put(). Those sites now pair ida_destroy() and
free_transport() with kfree(conn) regardless of which holder happens
to release the last reference. stop_sessions() only triggers the
transport shutdown and does not itself drop the last conn reference,
so it is unaffected.
The centralized release reaches sock_release() -> tcp_close() ->
lock_sock_nested() (might_sleep) from every final putter, including
__free_opinfo() invoked from an RCU softirq callback, which trips
CONFIG_DEBUG_ATOMIC_SLEEP. Defer the release to a dedicated
ksmbd_conn_wq workqueue so ksmbd_conn_put() is safe from any
non-sleeping context.
Make ksmbd_file own a strong connection reference while fp->conn is
non-NULL so durable-preserve and final-close paths cannot dereference
a stale connection. ksmbd_open_fd() and ksmbd_reopen_durable_fd()
take the reference via ksmbd_conn_get() (the latter also reorders the
fp->conn / fp->tcon assignments before __open_id() so the published fp
is never observed with fp->conn == NULL); session_fd_check() and
__ksmbd_close_fd() drop it via ksmbd_conn_put(). With that invariant,
session_fd_check() can take a local conn pointer once and use it
across the m_op_list and lock_list iterations even though op->conn
puts may otherwise drop the last reference.
At module exit the workqueue is flushed and destroyed after
rcu_barrier(), so any release queued by a trailing RCU callback is
drained before the inode hash and module text go away.
Fixes: ee426bfb9d ("ksmbd: add refcnt to ksmbd_conn struct")
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, ksmbd does not verify if the user attempting to reconnect
to a durable handle is the same user who originally opened the file.
This allows any authenticated user to hijack an orphaned durable handle
by predicting or brute-forcing the persistent ID.
According to MS-SMB2, the server MUST verify that the SecurityContext
of the reconnect request matches the SecurityContext associated with
the existing open.
Add a durable_owner structure to ksmbd_file to store the original opener's
UID, GID, and account name. and catpure the owner information when a file
handle becomes orphaned. and implementing ksmbd_vfs_compare_durable_owner()
to validate the identity of the requester during SMB2_CREATE (DHnC).
Fixes: c8efcc7861 ("ksmbd: add support for durable handles v1/v2")
Reported-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Reported-by: Navaneeth K <knavaneeth786@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb_grant_oplock() has two issues in the oplock publication sequence:
1) opinfo is linked into ci->m_op_list (via opinfo_add) before
add_lease_global_list() is called. If add_lease_global_list()
fails (kmalloc returns NULL), the error path frees the opinfo
via __free_opinfo() while it is still linked in ci->m_op_list.
Concurrent m_op_list readers (opinfo_get_list, or direct iteration
in smb_break_all_levII_oplock) dereference the freed node.
2) opinfo->o_fp is assigned after add_lease_global_list() publishes
the opinfo on the global lease list. A concurrent
find_same_lease_key() can walk the lease list and dereference
opinfo->o_fp->f_ci while o_fp is still NULL.
Fix by restructuring the publication sequence to eliminate post-publish
failure:
- Set opinfo->o_fp before any list publication (fixes NULL deref).
- Preallocate lease_table via alloc_lease_table() before opinfo_add()
so add_lease_global_list() becomes infallible after publication.
- Keep the original m_op_list publication order (opinfo_add before
lease list) so concurrent opens via same_client_has_lease() and
opinfo_get_list() still see the in-flight grant.
- Use opinfo_put() instead of __free_opinfo() on err_out so that
the RCU-deferred free path is used.
This also requires splitting add_lease_global_list() to take a
preallocated lease_table and changing its return type from int to void,
since it can no longer fail.
Fixes: 1dfd062caa ("ksmbd: fix use-after-free by using call_rcu() for oplock_info")
Cc: stable@vger.kernel.org
Signed-off-by: Werner Kasselman <werner@verivus.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is being
accessed after rcu_read_unlock() has been called. This creates a
race condition where the memory could be freed by a concurrent
writer between the unlock and the subsequent pointer dereferences
(opinfo->is_lease, etc.), leading to a use-after-free.
Fixes: 5fb282ba4f ("ksmbd: fix possible null-deref in smb_lazy_parent_lease_break_close")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd currently frees oplock_info immediately using kfree(), even
though it is accessed under RCU read-side critical sections in places
like opinfo_get() and proc_show_files().
Since there is no RCU grace period delay between nullifying the pointer
and freeing the memory, a reader can still access oplock_info
structure after it has been freed. This can leads to a use-after-free
especially in opinfo_get() where atomic_inc_not_zero() is called on
already freed memory.
Fix this by switching to deferred freeing using call_rcu().
Fixes: 18b4fac5ef ("ksmbd: fix use-after-free in smb_break_all_levII_oplock()")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
With the removal of the RFC1002 length field from the SMB header,
smb2_get_msg is now used to get the smb1 request from the request buffer.
Since this function is no longer exclusive to smb2 and now supports smb1
as well, This patch rename it to smb_get_msg to better reflect its usage.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Modify the following places:
- some fields in "struct create_durable_v2_rsp" ->
struct durable_context_v2_rsp
- durable_reconnect_context_v2_rsp -> durable_context_v2_rsp
- create_durable_v2_rsp -> create_durable_rsp_v2
Then move them to common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When ksmbd_conn_releasing(opinfo->conn) returns true,the refcount was not
decremented properly, causing a refcount leak that prevents the count from
reaching zero and the memory from being released.
Cc: stable@vger.kernel.org
Signed-off-by: Ziyan Xu <ziyan@securitygossip.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The list_first_entry() macro never returns NULL. If the list is
empty then it returns an invalid pointer. Use list_first_entry_or_null()
to check if the list is empty.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505080231.7OXwq4Te-lkp@intel.com/
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The previous patch that added bounds check for create lease context
introduced a memory leak. When the bounds check fails, the function
returns NULL without freeing the previously allocated lease_ctx_info
structure.
This patch fixes the issue by adding kfree(lreq) before returning NULL
in both boundary check cases.
Fixes: bab703ed84 ("ksmbd: add bounds check for create lease context")
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a room in smb_break_all_levII_oplock that can cause racy issues
when unlocking in the middle of the loop. This patch use read lock
to protect whole loop.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
r_count is only increased when there is an oplock break wait,
so r_count inc/decrement are not paired. This can cause r_count
to become negative, which can lead to a problem where the ksmbd
thread does not terminate.
Fixes: 3aa660c059 ("ksmbd: prevent connection release during oplock break notification")
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_work could be freed when after connection release.
Increment r_count of ksmbd_conn to indicate that requests
are not finished yet and to not release the connection.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
->interim_entry of ksmbd_work could be deleted after oplock is freed.
We don't need to manage it with linked list. The interim request could be
immediately sent whenever a oplock break wait is needed.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Prefer to report ENOMEM rather than incur the oom for allocations in
ksmbd. __GFP_NORETRY could not achieve that, It would fail the allocations
just too easily. __GFP_RETRY_MAYFAIL will keep retrying the allocation
until there is no more progress and fail the allocation instead go OOM
and let the caller to deal with it.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=B6Et
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- cleanups (moving duplicated code, removing unused code etc)
- fixes relating to "sfu" mount options (for better handling special
file types)
- SMB3.1.1 compression fixes/improvements
* tag 'v6.12-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
smb: client: fix compression heuristic functions
cifs: Update SFU comments about fifos and sockets
cifs: Add support for creating SFU symlinks
smb: use LIST_HEAD() to simplify code
cifs: Recognize SFU socket type
cifs: Show debug message when SFU Fifo type was detected
cifs: Put explicit zero byte into SFU block/char types
cifs: Add support for reading SFU symlink location
cifs: Fix recognizing SFU symlinks
smb: client: compress: fix an "illegal accesses" issue
smb: client: compress: fix a potential issue of freeing an invalid pointer
smb: client: compress: LZ77 code improvements cleanup
smb: client: insert compression check/call on write requests
smb3: mark compression as CONFIG_EXPERIMENTAL and fix missing compression operation
cifs: Remove obsoleted declaration for cifs_dir_open
smb: client: Use min() macro
cifs: convert to use ERR_CAST()
smb: add comment to STATUS_MCA_OCCURED
smb: move SMB2 Status code to common header file
smb: move some duplicate definitions to common/smbacl.h
...
There are only 4 different definitions between the client and server:
- STATUS_SERVER_UNAVAILABLE: from client/smb2status.h
- STATUS_FILE_NOT_AVAILABLE: from client/smb2status.h
- STATUS_NO_PREAUTH_INTEGRITY_HASH_OVERLAP: from server/smbstatus.h
- STATUS_INVALID_LOCK_RANGE: from server/smbstatus.h
Rename client/smb2status.h to common/smb2status.h, and merge the
2 different definitions of server to common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When sending an oplock break request, opinfo->conn is used,
But freed ->conn can be used on multichannel.
This patch add a reference count to the ksmbd_conn struct
so that it can be freed when it is no longer used.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE)
and parse_lease_state() return NULL.
Fix this by check if 'lease_ctx_info' is NULL.
Additionally, remove the redundant parentheses in
parse_durable_handle_context().
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch fixes generic/011 when oplocks is enable.
Avoid to send duplicate oplock break notifications like smb2 leases
case.
Fixes: 97c2ec6466 ("ksmbd: avoid to send duplicate lease break notifications")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch fix xfstests generic/070 test with smb2 leases = yes.
cifs.ko doesn't set parent lease key and epoch in create context v2 lease.
ksmbd suppose that parent lease and epoch are vaild if data length is
v2 lease context size and handle directory lease using this values.
ksmbd should hanle it as v1 lease not v2 lease if parent lease key and
epoch are not set in create context v2 lease.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
lease break wait for lease break acknowledgment.
rwsem is more suitable than unlock while traversing the list for parent
lease break in ->m_op_list.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch fixes generic/011 when enable smb2 leases.
if ksmbd sends multiple notifications for a file, cifs increments
the reference count of the file but it does not decrement the count by
the failure of queue_work.
So even if the file is closed, cifs does not send a SMB2_CLOSE request.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a spelling mistake in a ksmbd_debug debug message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
rcu_dereference can return NULL, so make sure we check against that.
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Durable file handles allow reopening a file preserved on a short
network outage and transparent client reconnection within a timeout.
i.e. Durable handles aren't necessarily cleaned up when the opening
process terminates.
This patch add support for durable handle version 1 and 2.
To prove durable handles work on ksmbd, I have tested this patch with
the following smbtorture tests:
smb2.durable-open.open-oplock
smb2.durable-open.open-lease
smb2.durable-open.reopen1
smb2.durable-open.reopen1a
smb2.durable-open.reopen1a-lease
smb2.durable-open.reopen2
smb2.durable-open.reopen2a
smb2.durable-open.reopen2-lease
smb2.durable-open.reopen2-lease-v2
smb2.durable-open.reopen3
smb2.durable-open.reopen4
smb2.durable-open.delete_on_close2
smb2.durable-open.file-position
smb2.durable-open.lease
smb2.durable-open.alloc-size
smb2.durable-open.read-only
smb2.durable-v2-open.create-blob
smb2.durable-v2-open.open-oplock
smb2.durable-v2-open.open-lease
smb2.durable-v2-open.reopen1
smb2.durable-v2-open.reopen1a
smb2.durable-v2-open.reopen1a-lease
smb2.durable-v2-open.reopen2
smb2.durable-v2-open.reopen2b
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When smb2 leases is disable, ksmbd can send oplock break notification
and cause wait oplock break ack timeout. It may appear like hang when
accessing a directory. This patch make only v2 leases handle the
directory.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Send lease break notification on FILE_RENAME_INFORMATION request.
This patch fix smb2.lease.v2_epoch2 test failure.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If existing lease state and request state are same, don't increment
epoch in create context.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If file opened with v2 lease is upgraded with v1 lease, smb server
should response v2 lease create context to client.
This patch fix smb2.lease.v2_epoch2 test failure.
This test case assumes the following scenario:
1. smb2 create with v2 lease(R, LEASE1 key)
2. smb server return smb2 create response with v2 lease context(R,
LEASE1 key, epoch + 1)
3. smb2 create with v1 lease(RH, LEASE1 key)
4. smb server return smb2 create response with v2 lease context(RH,
LEASE1 key, epoch + 2)
i.e. If same client(same lease key) try to open a file that is being
opened with v2 lease with v1 lease, smb server should return v2 lease.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Don't immediately send directory lease break notification on smb2_write().
Instead, It postpones it until smb2_close().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If client send different parent key, different client guid, or there is
no parent lease key flags in create context v2 lease, ksmbd send lease
break to client.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
RWH(Read + Write + Handle) caching state is not supported for directory.
ksmbd downgrade it to RH for directory if client send RWH caching lease
state.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Set SMB2_GLOBAL_CAP_DIRECTORY_LEASING to ->capabilities to inform server
support directory lease to client.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
To support v2 lease(directory lease), ksmbd set epoch in create context
v2 lease response.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add missing release async id and delete interim response entry after
sending status pending response. This only cause when smb2 lease is enable.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If ->DataOffset of create context is 0, DataBuffer size is not correctly
validated. This patch change wrong validation code and consider tag
length in request.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21824
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If smb2_lock or smb2_open request is compound, ksmbd could send wrong
interim response to client. ksmbd allocate new interim buffer instead of
using resonse buffer to support compound request.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
MacOS sends a compound request including read to the server
(e.g. open-read-close). So far, ksmbd has not handled read as
a compound request. For compatibility between ksmbd and an OS that
supports SMB, This patch provides compound support for read requests.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This bug is in parse_lease_state, and it is caused by the missing check
of `struct create_context`. When the ksmbd traverses the create_contexts,
it doesn't check if the field of `NameOffset` and `Next` is valid,
The KASAN message is following:
[ 6.664323] BUG: KASAN: slab-out-of-bounds in parse_lease_state+0x7d/0x280
[ 6.664738] Read of size 2 at addr ffff888005c08988 by task kworker/0:3/103
...
[ 6.666644] Call Trace:
[ 6.666796] <TASK>
[ 6.666933] dump_stack_lvl+0x33/0x50
[ 6.667167] print_report+0xcc/0x620
[ 6.667903] kasan_report+0xae/0xe0
[ 6.668374] kasan_check_range+0x35/0x1b0
[ 6.668621] parse_lease_state+0x7d/0x280
[ 6.668868] smb2_open+0xbe8/0x4420
[ 6.675137] handle_ksmbd_work+0x282/0x820
Use smb2_find_context_vals() to find smb2 create request lease context.
smb2_find_context_vals validate create context fields.
Cc: stable@vger.kernel.org
Reported-by: Chih-Yen Chang <cc85nod@gmail.com>
Tested-by: Chih-Yen Chang <cc85nod@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If opinfo->conn is another connection and while ksmbd send oplock break
request to cient on current connection, The connection for opinfo->conn
can be disconnect and conn could be freed. When sending oplock break
request, this ksmbd_conn can be used and cause user-after-free issue.
When getting opinfo from the list, ksmbd check connection is being
released. If it is not released, Increase ->r_count to wait that connection
is freed.
Cc: stable@vger.kernel.org
Reported-by: Per Forlin <per.forlin@axis.com>
Tested-by: Per Forlin <per.forlin@axis.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko
and helper modules) to new fs/smb subdirectory:
fs/cifs --> fs/smb/client
fs/ksmbd --> fs/smb/server
fs/smbfs_common --> fs/smb/common
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
