Calling sprintf in a loop is not very efficient, and in any case, we
already have an implementation of bin-to-hex conversion in lib/ which
we might as well use.
Note that ecryptfs_to_hex used to nul-terminate the destination (and
the kernel doc was wrong about the required output size), while
bin2hex doesn't. [All but one user of ecryptfs_to_hex explicitly
nul-terminates the result anyway.]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
[tyhicks: Include <linux/kernel.h> in ecryptfs_kernel.h]
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Noticed some minor spelling errors when looking through the code.
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.
Similar change for ->getxattr() had been done in commit ce23e64. Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.
Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull parallel filesystem directory handling update from Al Viro.
This is the main parallel directory work by Al that makes the vfs layer
able to do lookup and readdir in parallel within a single directory.
That's a big change, since this used to be all protected by the
directory inode mutex.
The inode mutex is replaced by an rwsem, and serialization of lookups of
a single name is done by a "in-progress" dentry marker.
The series begins with xattr cleanups, and then ends with switching
filesystems over to actually doing the readdir in parallel (switching to
the "iterate_shared()" that only takes the read lock).
A more detailed explanation of the process from Al Viro:
"The xattr work starts with some acl fixes, then switches ->getxattr to
passing inode and dentry separately. This is the point where the
things start to get tricky - that got merged into the very beginning
of the -rc3-based #work.lookups, to allow untangling the
security_d_instantiate() mess. The xattr work itself proceeds to
switch a lot of filesystems to generic_...xattr(); no complications
there.
After that initial xattr work, the series then does the following:
- untangle security_d_instantiate()
- convert a bunch of open-coded lookup_one_len_unlocked() to calls of
that thing; one such place (in overlayfs) actually yields a trivial
conflict with overlayfs fixes later in the cycle - overlayfs ended
up switching to a variant of lookup_one_len_unlocked() sans the
permission checks. I would've dropped that commit (it gets
overridden on merge from #ovl-fixes in #for-next; proper resolution
is to use the variant in mainline fs/overlayfs/super.c), but I
didn't want to rebase the damn thing - it was fairly late in the
cycle...
- some filesystems had managed to depend on lookup/lookup exclusion
for *fs-internal* data structures in a way that would break if we
relaxed the VFS exclusion. Fixing hadn't been hard, fortunately.
- core of that series - parallel lookup machinery, replacing
->i_mutex with rwsem, making lookup_slow() take it only shared. At
that point lookups happen in parallel; lookups on the same name
wait for the in-progress one to be done with that dentry.
Surprisingly little code, at that - almost all of it is in
fs/dcache.c, with fs/namei.c changes limited to lookup_slow() -
making it use the new primitive and actually switching to locking
shared.
- parallel readdir stuff - first of all, we provide the exclusion on
per-struct file basis, same as we do for read() vs lseek() for
regular files. That takes care of most of the needed exclusion in
readdir/readdir; however, these guys are trickier than lookups, so
I went for switching them one-by-one. To do that, a new method
'->iterate_shared()' is added and filesystems are switched to it
as they are either confirmed to be OK with shared lock on directory
or fixed to be OK with that. I hope to kill the original method
come next cycle (almost all in-tree filesystems are switched
already), but it's still not quite finished.
- several filesystems get switched to parallel readdir. The
interesting part here is dealing with dcache preseeding by readdir;
that needs minor adjustment to be safe with directory locked only
shared.
Most of the filesystems doing that got switched to in those
commits. Important exception: NFS. Turns out that NFS folks, with
their, er, insistence on VFS getting the fuck out of the way of the
Smart Filesystem Code That Knows How And What To Lock(tm) have
grown the locking of their own. They had their own homegrown
rwsem, with lookup/readdir/atomic_open being *writers* (sillyunlink
is the reader there). Of course, with VFS getting the fuck out of
the way, as requested, the actual smarts of the smart filesystem
code etc. had become exposed...
- do_last/lookup_open/atomic_open cleanups. As the result, open()
without O_CREAT locks the directory only shared. Including the
->atomic_open() case. Backmerge from #for-linus in the middle of
that - atomic_open() fix got brought in.
- then comes NFS switch to saner (VFS-based ;-) locking, killing the
homegrown "lookup and readdir are writers" kinda-sorta rwsem. All
exclusion for sillyunlink/lookup is done by the parallel lookups
mechanism. Exclusion between sillyunlink and rmdir is a real rwsem
now - rmdir being the writer.
Result: NFS lookups/readdirs/O_CREAT-less opens happen in parallel
now.
- the rest of the series consists of switching a lot of filesystems
to parallel readdir; in a lot of cases ->llseek() gets simplified
as well. One backmerge in there (again, #for-linus - rockridge
fix)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (74 commits)
ext4: switch to ->iterate_shared()
hfs: switch to ->iterate_shared()
hfsplus: switch to ->iterate_shared()
hostfs: switch to ->iterate_shared()
hpfs: switch to ->iterate_shared()
hpfs: handle allocation failures in hpfs_add_pos()
gfs2: switch to ->iterate_shared()
f2fs: switch to ->iterate_shared()
afs: switch to ->iterate_shared()
befs: switch to ->iterate_shared()
befs: constify stuff a bit
isofs: switch to ->iterate_shared()
get_acorn_filename(): deobfuscate a bit
btrfs: switch to ->iterate_shared()
logfs: no need to lock directory in lseek
switch ecryptfs to ->iterate_shared
9p: switch to ->iterate_shared()
fat: switch to ->iterate_shared()
romfs, squashfs: switch to ->iterate_shared()
more trivial ->iterate_shared conversions
...
Pull crypto update from Herbert Xu:
"API:
- Crypto self tests can now be disabled at boot/run time.
- Add async support to algif_aead.
Algorithms:
- A large number of fixes to MPI from Nicolai Stange.
- Performance improvement for HMAC DRBG.
Drivers:
- Use generic crypto engine in omap-des.
- Merge ppc4xx-rng and crypto4xx drivers.
- Fix lockups in sun4i-ss driver by disabling IRQs.
- Add DMA engine support to ccp.
- Reenable talitos hash algorithms.
- Add support for Hisilicon SoC RNG.
- Add basic crypto driver for the MXC SCC.
Others:
- Do not allocate crypto hash tfm in NORECLAIM context in ecryptfs"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits)
crypto: qat - change the adf_ctl_stop_devices to void
crypto: caam - fix caam_jr_alloc() ret code
crypto: vmx - comply with ABIs that specify vrsave as reserved.
crypto: testmgr - Add a flag allowing the self-tests to be disabled at runtime.
crypto: ccp - constify ccp_actions structure
crypto: marvell/cesa - Use dma_pool_zalloc
crypto: qat - make adf_vf_isr.c dependant on IOV config
crypto: qat - Fix typo in comments
lib: asn1_decoder - add MODULE_LICENSE("GPL")
crypto: omap-sham - Use dma_request_chan() for requesting DMA channel
crypto: omap-des - Use dma_request_chan() for requesting DMA channel
crypto: omap-aes - Use dma_request_chan() for requesting DMA channel
crypto: omap-des - Integrate with the crypto engine framework
crypto: s5p-sss - fix incorrect usage of scatterlists api
crypto: s5p-sss - Fix missed interrupts when working with 8 kB blocks
crypto: s5p-sss - Use common BIT macro
crypto: mxc-scc - fix unwinding in mxc_scc_crypto_register()
crypto: mxc-scc - signedness bugs in mxc_scc_ablkcipher_req_init()
crypto: talitos - fix ahash algorithms registration
crypto: ccp - Ensure all dependencies are specified
...
You cannot allocate crypto tfm objects in NORECLAIM or NOFS contexts.
The ecryptfs code currently does exactly that for the MD5 tfm.
This patch fixes it by preallocating the MD5 tfm in a safe context.
The MD5 tfm is also reentrant so this patch removes the superfluous
cs_hash_tfm_mutex.
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs updates from Al Viro:
- Preparations of parallel lookups (the remaining main obstacle is the
need to move security_d_instantiate(); once that becomes safe, the
rest will be a matter of rather short series local to fs/*.c
- preadv2/pwritev2 series from Christoph
- assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
splice: handle zero nr_pages in splice_to_pipe()
vfs: show_vfsstat: do not ignore errors from show_devname method
dcache.c: new helper: __d_add()
don't bother with __d_instantiate(dentry, NULL)
untangle fsnotify_d_instantiate() a bit
uninline d_add()
replace d_add_unique() with saner primitive
quota: use lookup_one_len_unlocked()
cifs_get_root(): use lookup_one_len_unlocked()
nfs_lookup: don't bother with d_instantiate(dentry, NULL)
kill dentry_unhash()
ceph_fill_trace(): don't bother with d_instantiate(dn, NULL)
autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup()
configfs: move d_rehash() into configfs_create() for regular files
ceph: don't bother with d_rehash() in splice_dentry()
namei: teach lookup_slow() to skip revalidate
namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()
lookup_one_len_unlocked(): use lookup_dcache()
namei: simplify invalidation logics in lookup_dcache()
namei: change calling conventions for lookup_{fast,slow} and follow_managed()
...
This patch replaces uses of ablkcipher and blkcipher with skcipher,
and the long obsolete hash interface with shash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The key_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around this call might not be needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- The filename decryption routines were, at times, writing a zero byte one
character past the end of the filename buffer
- The encrypted view feature attempted, and failed, to roll its own form of
enforcing a read-only mount instead of letting the VFS enforce it
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCgAGBQJUlGlWAAoJENaSAD2qAscKgdwQAJLCgt5xgoij8uH65mYVy6PE
++E8KggCHchhUcFh19EuuG++ENzwZedqKqbbRhmZt+svla08uPDO0jY+sYaOZzqB
HMzZyyL4Fw/DiVsK6LUMGfN2CS7tua9ReK0dj4tUc3jwBplnQnGrQlUPbgdPRJJp
XJDKHVtHGQPQC1dJAeProCJTg23jv5wXacly2I5VxZuh5DnDWjuo2KkzqGMKfadU
9bxOf5DjVwQ/X6apgkNxG/8Q6J8a+80K7SGs/aRELIuRL0+mIj5AX9ht+p5Z0XI+
E8jU4HM2biuqj8PtxK/WbyF1bHiREVyOLdneW+n3pcqGTLMZ3TLpDURkNd0cwZcd
AGoZtUZZuQ/xvzE9IrEj+KYeINnZzPQpyJu9jXXp1CsQJ8u/wUG9e0kcJrUI1dZ/
q26zhPaVhJ9x0go/BNOxzTUpOtuMWXttAVZGICthp74I5l+DgfSZ4J4CeQmFMMRs
kbiTg5h4qsrD4jnEU/BCscpCLoz4qlF6+q/+lspwkg7OwvhHc0qSMJn3UjZ/eYzb
ncDp6gc4Iju3RhWnVEZphA4ttbZJX7ahER4y0NdIG65Fa37AUEUxy0OmGfoyFOmC
KVtlHkl2hKoCB5+ujLzL7WimH33ogtVhtOJTZlXzS0lsdSfSxUWU4/OZ22jTy0hL
Bnx6uoNIPWsr6b5OJiA0
=jTyq
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-3.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull eCryptfs fixes from Tyler Hicks:
"Fixes for filename decryption and encrypted view plus a cleanup
- The filename decryption routines were, at times, writing a zero
byte one character past the end of the filename buffer
- The encrypted view feature attempted, and failed, to roll its own
form of enforcing a read-only mount instead of letting the VFS
enforce it"
* tag 'ecryptfs-3.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: Remove buggy and unnecessary write in file name decode routine
eCryptfs: Remove unnecessary casts when parsing packet lengths
eCryptfs: Force RO mount when encrypted view is enabled
Dmitry Chernenkov used KASAN to discover that eCryptfs writes past the
end of the allocated buffer during encrypted filename decoding. This
fix corrects the issue by getting rid of the unnecessary 0 write when
the current bit offset is 2.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Reported-by: Dmitry Chernenkov <dmitryc@google.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org # v2.6.29+: 51ca58d eCryptfs: Filename Encryption: Encoding and encryption functions
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.
[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shifting page->index on 32 bit systems was overflowing, causing
data corruption of > 4GB files. Fix this by casting it first.
https://launchpad.net/bugs/1243636
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Lars Duesing <lars.duesing@camelotsweb.de>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
It might be possible for two callers to race the mutex lock after the
NULL ctx check. Instead, move the lock above the check so there isn't
the possibility of leaking a crypto ctx. Additionally, report the full
algo name when failing.
Signed-off-by: Kees Cook <keescook@chromium.org>
[tyhicks: remove out label, which is no longer used]
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
It doesn't make sense to check if an array is NULL. The compiler just
removes the check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
- Remove redundant code by merging some encrypt and decrypt functions
- Get rid of a helper page allocation during page decryption by using in-place
decryption
- Better use of entire pages during page crypto operations
- Several code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=mRpN
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-3.11-rc1-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull eCryptfs updates from Tyler Hicks:
"Code cleanups and improved buffer handling during page crypto
operations:
- Remove redundant code by merging some encrypt and decrypt functions
- Get rid of a helper page allocation during page decryption by using
in-place decryption
- Better use of entire pages during page crypto operations
- Several code cleanups"
* tag 'ecryptfs-3.11-rc1-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
Use ecryptfs_dentry_to_lower_path in a couple of places
eCryptfs: Make extent and scatterlist crypt function parameters similar
eCryptfs: Collapse crypt_page_offset() into crypt_extent()
eCryptfs: Merge ecryptfs_encrypt_extent() and ecryptfs_decrypt_extent()
eCryptfs: Combine page_offset crypto functions
eCryptfs: Combine encrypt_scatterlist() and decrypt_scatterlist()
eCryptfs: Decrypt pages in-place
eCryptfs: Accept one offset parameter in page offset crypto functions
eCryptfs: Simplify lower file offset calculation
eCryptfs: Read/write entire page during page IO
eCryptfs: Use entire helper page during page crypto operations
eCryptfs: Cocci spatch "memdup.spatch"
The 'dest' abbreviation is only used in crypt_scatterlist(), while all
other functions in crypto.c use 'dst' so dest_sg should be renamed to
dst_sg.
The crypt_stat parameter is typically the first parameter in internal
eCryptfs functions so crypt_stat and dst_page should be swapped in
crypt_extent().
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
crypt_page_offset() simply initialized the two scatterlists and called
crypt_scatterlist() so it is simple enough to move into the only
function that calls it.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
They are identical except if the src_page or dst_page index is used, so
they can be merged safely if page_index is conditionally assigned.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Combine ecryptfs_encrypt_page_offset() and
ecryptfs_decrypt_page_offset(). These two functions are functionally
identical so they can be safely merged if the caller can indicate
whether an encryption or decryption operation should occur.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
These two functions are identical except for a debug printk and whether
they call crypto_ablkcipher_encrypt() or crypto_ablkcipher_decrypt(), so
they can be safely merged if the caller can indicate if encryption or
decryption should occur.
The debug printk is useless so it is removed.
Two new #define's are created to indicate if an ENCRYPT or DECRYPT
operation is desired.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
When reading in a page, eCryptfs would allocate a helper page, fill it
with encrypted data from the lower filesytem, and then decrypt the data
from the encrypted page and store the result in the eCryptfs page cache
page.
The crypto API supports in-place crypto operations which means that the
allocation of the helper page is unnecessary when decrypting. This patch
gets rid of the unneeded page allocation by reading encrypted data from
the lower filesystem directly into the page cache page. The page cache
page is then decrypted in-place.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
There is no longer a need to accept different offset values for the
source and destination pages when encrypting/decrypting an extent in an
eCryptfs page. The two offsets can be collapsed into a single parameter.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Now that lower filesystem IO operations occur for complete
PAGE_CACHE_SIZE bytes, the calculation for converting an eCryptfs extent
index into a lower file offset can be simplified.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
When reading and writing encrypted pages, perform IO using the entire
page all at once rather than 4096 bytes at a time.
This only affects architectures where PAGE_CACHE_SIZE is larger than
4096 bytes.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
When encrypting eCryptfs pages and decrypting pages from the lower
filesystem, utilize the entire helper page rather than only the first
4096 bytes.
This only affects architectures where PAGE_CACHE_SIZE is larger than
4096 bytes.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Make the switch from the blkcipher kernel crypto interface to the
ablkcipher interface.
encrypt_scatterlist() and decrypt_scatterlist() now use the ablkcipher
interface but, from the eCryptfs standpoint, still treat the crypto
operation as a synchronous operation. They submit the async request and
then wait until the operation is finished before they return. Most of
the changes are contained inside those two functions.
Despite waiting for the completion of the crypto operation, the
ablkcipher interface provides performance increases in most cases when
used on AES-NI capable hardware.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Colin King <colin.king@canonical.com>
Reviewed-by: Zeev Zilberman <zeev@annapurnaLabs.com>
Cc: Dustin Kirkland <dustin.kirkland@gazzang.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Ying Huang <ying.huang@intel.com>
Cc: Thieu Le <thieule@google.com>
Cc: Li Wang <dragonylffly@163.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@iki.fi>
This is always called with a valid "sg" pointer. My static checker
complains because the call to sg_init_table() dereferences "sg" before
we reach the checks.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
the function ecryptfs_encode_for_filename() is only used in this file
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
statfs() calls on eCryptfs files returned the wrong filesystem type and,
when using filename encryption, the wrong maximum filename length.
If mount-wide filename encryption is enabled, the cipher block size and
the lower filesystem's max filename length will determine the max
eCryptfs filename length. Pre-tested, known good lengths are used when
the lower filesystem's namelen is 255 and a cipher with 8 or 16 byte
block sizes is used. In other, less common cases, we fall back to a safe
rounded-down estimate when determining the eCryptfs namelen.
https://launchpad.net/bugs/885744
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
If pages passed to the eCryptfs extent-based crypto functions are not
mapped and the module parameter ecryptfs_verbosity=1 was specified at
loading time, a NULL pointer dereference will occur.
Note that this wouldn't happen on a production system, as you wouldn't
pass ecryptfs_verbosity=1 on a production system. It leaks private
information to the system logs and is for debugging only.
The debugging info printed in these messages is no longer very useful
and rather than doing a kmap() in these debugging paths, it will be
better to simply remove the debugging paths completely.
https://launchpad.net/bugs/913651
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Daniel DeFreez
Cc: <stable@vger.kernel.org>
Removes unneeded variable initialization in ecryptfs_read_metadata(). Also adds
a small comment to help explain metadata reading logic.
[tyhicks@canonical.com: Pulled out of for-stable patch and wrote commit msg]
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Print inode on metadata read failure. The only real
way of dealing with metadata read failures is to delete
the underlying file system file. Having the inode
allows one to 'find . -inum INODE`.
[tyhicks@canonical.com: Removed some minor not-for-stable parts]
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
From mhalcrow's original commit message:
Characters with ASCII values greater than the size of
filename_rev_map[] are valid filename characters.
ecryptfs_decode_from_filename() will access kernel memory beyond
that array, and ecryptfs_parse_tag_70_packet() will then decrypt
those characters. The attacker, using the FNEK of the crafted file,
can then re-encrypt the characters to reveal the kernel memory past
the end of the filename_rev_map[] array. I expect low security
impact since this array is statically allocated in the text area,
and the amount of memory past the array that is accessible is
limited by the largest possible ASCII filename character.
This patch solves the issue reported by mhalcrow but with an
implementation suggested by Linus to simply extend the length of
filename_rev_map[] to 256. Characters greater than 0x7A are mapped to
0x00, which is how invalid characters less than 0x7A were previously
being handled.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Michael Halcrow <mhalcrow@google.com>
Cc: stable@kernel.org
The file creation path prematurely called d_instantiate() and
unlock_new_inode() before the eCryptfs inode info was fully
allocated and initialized and before the eCryptfs metadata was written
to the lower file.
This could result in race conditions in subsequent file and inode
operations leading to unexpected error conditions or a null pointer
dereference while attempting to use the unallocated memory.
https://launchpad.net/bugs/813146
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: stable@kernel.org
Now that ecryptfs_lookup_interpose() is no longer using
ecryptfs_header_cache_2 to read in metadata, the kmem_cache can be
removed and the ecryptfs_header_cache_1 kmem_cache can be renamed to
ecryptfs_header_cache.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
ecryptfs_lookup_interpose() has turned into spaghetti code over the
years. This is an effort to clean it up.
- Shorten overly descriptive variable names such as ecryptfs_dentry
- Simplify gotos and error paths
- Create helper function for reading plaintext i_size from metadata
It also includes an optimization when reading i_size from the metadata.
A complete page-sized kmem_cache_alloc() was being done to read in 16
bytes of metadata. The buffer for that is now statically declared.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Instead of having the calling functions translate the true/false return
code to either 0 or -EINVAL, have contains_ecryptfs_marker() return 0 or
-EINVAL so that the calling functions can just reuse the return code.
Also, rename the function to ecryptfs_validate_marker() to avoid callers
mistakenly thinking that it returns true/false codes.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Only unlock and d_add() new inodes after the plaintext inode size has
been read from the lower filesystem. This fixes a race condition that
was sometimes seen during a multi-job kernel build in an eCryptfs mount.
https://bugzilla.kernel.org/show_bug.cgi?id=36002
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Reported-by: David <david@unsolicited.net>
Tested-by: David <david@unsolicited.net>
When failing to read the lower file's crypto metadata during a lookup,
eCryptfs must continue on without throwing an error. For example, there
may be a plaintext file in the lower mount point that the user wants to
delete through the eCryptfs mount.
If an error is encountered while reading the metadata in lookup(), the
eCryptfs inode's size could be incorrect. We must be sure to reread the
plaintext inode size from the metadata when performing an open() or
setattr(). The metadata is already being read in those paths, so this
adds minimal performance overhead.
This patch introduces a flag which will track whether or not the
plaintext inode size has been read so that an incorrect i_size can be
fixed in the open() or setattr() paths.
https://bugs.launchpad.net/bugs/509180
Cc: <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
This patch removes the 'num_global_auth_toks' field of the
ecryptfs_mount_crypt_stat structure, used to count the number of items in
the 'global_auth_tok_list' list. This variable is not needed because there
are no checks based upon it.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
When creating a new eCryptfs file, the crypto metadata is written out
and then the lower file was being "grown" with 4 kB of encrypted zeroes.
I suspect that growing the encrypted file was to prevent an information
leak that the unencrypted file was empty. However, the unencrypted file
size is stored, in plaintext, in the metadata so growing the file is
unnecessary.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Commit cb55d21f6fa19d8c6c2680d90317ce88c1f57269 revealed a number of
missing 'z' length modifiers in calls to ecryptfs_printk() when
printing variables of type size_t. This patch fixes those compiler
warnings.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Add __attribute__((format... to __ecryptfs_printk
Make formats and arguments match.
Add casts to (unsigned long long) for %llu.
Signed-off-by: Joe Perches <joe@perches.com>
[tyhicks: 80 columns cleanup and fixed typo]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Fixes a regression caused by 21edad3220
When file name encryption was enabled, ecryptfs_lookup() failed to use
the encrypted and encoded version of the upper, plaintext, file name
when performing a lookup in the lower file system. This made it
impossible to lookup existing encrypted file names and any newly created
files would have plaintext file names in the lower file system.
https://bugs.launchpad.net/ecryptfs/+bug/623087
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Some ecryptfs init functions are not prefixed by __init and thus not
freed after initialization. This patch saved about 1kB in ecryptfs
module.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
eCryptfs: Turn lower lookup error messages into debug messages
eCryptfs: Copy lower directory inode times and size on link
ecryptfs: fix use with tmpfs by removing d_drop from ecryptfs_destroy_inode
ecryptfs: fix error code for missing xattrs in lower fs
eCryptfs: Decrypt symlink target for stat size
eCryptfs: Strip metadata in xattr flag in encrypted view
eCryptfs: Clear buffer before reading in metadata xattr
eCryptfs: Rename ecryptfs_crypt_stat.num_header_bytes_at_front
eCryptfs: Fix metadata in xattr feature regression
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
The ecryptfs_encrypted_view mount option provides a unified way of
viewing encrypted eCryptfs files. If the metadata is stored in a xattr,
the metadata is moved to the file header when the file is read inside
the eCryptfs mount. Because of this, we should strip the
ECRYPTFS_METADATA_IN_XATTR flag from the header's flag section. This
allows eCryptfs to treat the file as an eCryptfs file with a header
at the front.
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
We initially read in the first PAGE_CACHE_SIZE of a file to if the
eCryptfs header marker can be found. If it isn't found and
ecryptfs_xattr_metadata was given as a mount option, then the
user.ecryptfs xattr is read into the same buffer. Since the data from
the first page of the file wasn't cleared, it is possible that we think
we've found a second tag 3 or tag 1 packet and then error out after the
packet contents aren't as expected. This patch clears the buffer before
filling it with metadata from the user.ecryptfs xattr.
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
This patch renames the num_header_bytes_at_front variable to
metadata_size since it now contains the max size of the metadata.
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Fixes regression in 8faece5f90
When using the ecryptfs_xattr_metadata mount option, eCryptfs stores the
metadata (normally stored at the front of the file) in the user.ecryptfs
xattr. This causes ecryptfs_crypt_stat.num_header_bytes_at_front to be
0, since there is no header data at the front of the file. This results
in too much memory being requested and ENOMEM being returned from
ecryptfs_write_metadata().
This patch fixes the problem by using the num_header_bytes_at_front
variable for specifying the max size of the metadata, despite whether it
is stored in the header or xattr.
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
The "full_alg_name" variable is used on a couple error paths, so we
shouldn't free it until the end.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Errors returned from vfs_read() and vfs_write() calls to the lower
filesystem were being masked as -EINVAL. This caused some confusion to
users who saw EINVAL instead of ENOSPC when the disk was full, for
instance.
Also, the actual bytes read or written were not accessible by callers to
ecryptfs_read_lower() and ecryptfs_write_lower(), which may be useful in
some cases. This patch updates the error handling logic where those
functions are called in order to accept positive return codes indicating
success.
Cc: Eric Sandeen <esandeen@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: ecryptfs-devel@lists.launchpad.net
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Returns -ENOTSUPP when attempting to use filename encryption with
something other than a password authentication token, such as a private
token from openssl. Using filename encryption with a userspace eCryptfs
key module is a future goal. Until then, this patch handles the
situation a little better than simply using a BUG_ON().
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: ecryptfs-devel@lists.launchpad.net
Cc: stable <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Returns an error when an unrecognized cipher code is present in a tag 3
packet or an ecryptfs_crypt_stat cannot be initialized. Also sets an
crypt_stat->tfm error pointer to NULL to ensure that it will not be
incorrectly freed in ecryptfs_destroy_crypt_stat().
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: ecryptfs-devel@lists.launchpad.net
Cc: stable <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
So, I compiled a 2.6.31-rc5 kernel with ecryptfs and loaded its module.
When it came time to mount my filesystem, I got this in dmesg, and it
refused to mount:
[93577.776637] Unable to allocate crypto cipher with name [aes]; rc = [-2]
[93577.783280] Error attempting to initialize key TFM cipher with name = [aes]; rc = [-2]
[93577.791183] Error attempting to initialize cipher with name = [aes] and key size = [32]; rc = [-2]
[93577.800113] Error parsing options; rc = [-22]
I figured from the error message that I'd either forgotten to load "aes"
or that my key size was bogus. Neither one of those was the case. In
fact, I was missing the CRYPTO_ECB config option and the 'ecb' module.
Unfortunately, there's no trace of 'ecb' in that error message.
I've done two things to fix this. First, I've modified ecryptfs's
Kconfig entry to select CRYPTO_ECB and CRYPTO_CBC. I also took CRYPTO
out of the dependencies since the 'select' will take care of it for us.
I've also modified the error messages to print a string that should
contain both 'ecb' and 'aes' in my error case. That will give any
future users a chance of finding the right modules and Kconfig options.
I also wonder if we should:
select CRYPTO_AES if !EMBEDDED
since I think most ecryptfs users are using AES like me.
Cc: ecryptfs-devel@lists.launchpad.net
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
[tyhicks@linux.vnet.ibm.com: Removed extra newline, 80-char violation]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Lockdep reports the following valid-looking possible AB-BA deadlock with
global_auth_tok_list_mutex and keysig_list_mutex:
ecryptfs_new_file_context() ->
ecryptfs_copy_mount_wide_sigs_to_inode_sigs() ->
mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
-> ecryptfs_add_keysig() ->
mutex_lock(&crypt_stat->keysig_list_mutex);
vs
ecryptfs_generate_key_packet_set() ->
mutex_lock(&crypt_stat->keysig_list_mutex);
-> ecryptfs_find_global_auth_tok_for_sig() ->
mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
ie the two mutexes are taken in opposite orders in the two different
code paths. I'm not sure if this is a real bug where two threads could
actually hit the two paths in parallel and deadlock, but it at least
makes lockdep impossible to use with ecryptfs since this report triggers
every time and disables future lockdep reporting.
Since ecryptfs_add_keysig() is called only from the single callsite in
ecryptfs_copy_mount_wide_sigs_to_inode_sigs(), the simplest fix seems to
be to move the lock of keysig_list_mutex back up outside of the where
global_auth_tok_list_mutex is taken. This patch does that, and fixes
the lockdep report on my system (and ecryptfs still works OK).
The full output of lockdep fixed by this patch is:
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.31-2-generic #14~rbd2
-------------------------------------------------------
gdm/2640 is trying to acquire lock:
(&mount_crypt_stat->global_auth_tok_list_mutex){+.+.+.}, at: [<ffffffff8121591e>] ecryptfs_find_global_auth_tok_for_sig+0x2e/0x90
but task is already holding lock:
(&crypt_stat->keysig_list_mutex){+.+.+.}, at: [<ffffffff81217728>] ecryptfs_generate_key_packet_set+0x58/0x2b0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&crypt_stat->keysig_list_mutex){+.+.+.}:
[<ffffffff8108c897>] check_prev_add+0x2a7/0x370
[<ffffffff8108cfc1>] validate_chain+0x661/0x750
[<ffffffff8108d2e7>] __lock_acquire+0x237/0x430
[<ffffffff8108d585>] lock_acquire+0xa5/0x150
[<ffffffff815526cd>] __mutex_lock_common+0x4d/0x3d0
[<ffffffff81552b56>] mutex_lock_nested+0x46/0x60
[<ffffffff8121526a>] ecryptfs_add_keysig+0x5a/0xb0
[<ffffffff81213299>] ecryptfs_copy_mount_wide_sigs_to_inode_sigs+0x59/0xb0
[<ffffffff81214b06>] ecryptfs_new_file_context+0xa6/0x1a0
[<ffffffff8120e42a>] ecryptfs_initialize_file+0x4a/0x140
[<ffffffff8120e54d>] ecryptfs_create+0x2d/0x60
[<ffffffff8113a7d4>] vfs_create+0xb4/0xe0
[<ffffffff8113a8c4>] __open_namei_create+0xc4/0x110
[<ffffffff8113d1c1>] do_filp_open+0xa01/0xae0
[<ffffffff8112d8d9>] do_sys_open+0x69/0x140
[<ffffffff8112d9f0>] sys_open+0x20/0x30
[<ffffffff81013132>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
-> #0 (&mount_crypt_stat->global_auth_tok_list_mutex){+.+.+.}:
[<ffffffff8108c675>] check_prev_add+0x85/0x370
[<ffffffff8108cfc1>] validate_chain+0x661/0x750
[<ffffffff8108d2e7>] __lock_acquire+0x237/0x430
[<ffffffff8108d585>] lock_acquire+0xa5/0x150
[<ffffffff815526cd>] __mutex_lock_common+0x4d/0x3d0
[<ffffffff81552b56>] mutex_lock_nested+0x46/0x60
[<ffffffff8121591e>] ecryptfs_find_global_auth_tok_for_sig+0x2e/0x90
[<ffffffff812177d5>] ecryptfs_generate_key_packet_set+0x105/0x2b0
[<ffffffff81212f49>] ecryptfs_write_headers_virt+0xc9/0x120
[<ffffffff8121306d>] ecryptfs_write_metadata+0xcd/0x200
[<ffffffff8120e44b>] ecryptfs_initialize_file+0x6b/0x140
[<ffffffff8120e54d>] ecryptfs_create+0x2d/0x60
[<ffffffff8113a7d4>] vfs_create+0xb4/0xe0
[<ffffffff8113a8c4>] __open_namei_create+0xc4/0x110
[<ffffffff8113d1c1>] do_filp_open+0xa01/0xae0
[<ffffffff8112d8d9>] do_sys_open+0x69/0x140
[<ffffffff8112d9f0>] sys_open+0x20/0x30
[<ffffffff81013132>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
other info that might help us debug this:
2 locks held by gdm/2640:
#0: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8113cb8b>] do_filp_open+0x3cb/0xae0
#1: (&crypt_stat->keysig_list_mutex){+.+.+.}, at: [<ffffffff81217728>] ecryptfs_generate_key_packet_set+0x58/0x2b0
stack backtrace:
Pid: 2640, comm: gdm Tainted: G C 2.6.31-2-generic #14~rbd2
Call Trace:
[<ffffffff8108b988>] print_circular_bug_tail+0xa8/0xf0
[<ffffffff8108c675>] check_prev_add+0x85/0x370
[<ffffffff81094912>] ? __module_text_address+0x12/0x60
[<ffffffff8108cfc1>] validate_chain+0x661/0x750
[<ffffffff81017275>] ? print_context_stack+0x85/0x140
[<ffffffff81089c68>] ? find_usage_backwards+0x38/0x160
[<ffffffff8108d2e7>] __lock_acquire+0x237/0x430
[<ffffffff8108d585>] lock_acquire+0xa5/0x150
[<ffffffff8121591e>] ? ecryptfs_find_global_auth_tok_for_sig+0x2e/0x90
[<ffffffff8108b0b0>] ? check_usage_backwards+0x0/0xb0
[<ffffffff815526cd>] __mutex_lock_common+0x4d/0x3d0
[<ffffffff8121591e>] ? ecryptfs_find_global_auth_tok_for_sig+0x2e/0x90
[<ffffffff8121591e>] ? ecryptfs_find_global_auth_tok_for_sig+0x2e/0x90
[<ffffffff8108c02c>] ? mark_held_locks+0x6c/0xa0
[<ffffffff81125b0d>] ? kmem_cache_alloc+0xfd/0x1a0
[<ffffffff8108c34d>] ? trace_hardirqs_on_caller+0x14d/0x190
[<ffffffff81552b56>] mutex_lock_nested+0x46/0x60
[<ffffffff8121591e>] ecryptfs_find_global_auth_tok_for_sig+0x2e/0x90
[<ffffffff812177d5>] ecryptfs_generate_key_packet_set+0x105/0x2b0
[<ffffffff81212f49>] ecryptfs_write_headers_virt+0xc9/0x120
[<ffffffff8121306d>] ecryptfs_write_metadata+0xcd/0x200
[<ffffffff81210240>] ? ecryptfs_init_persistent_file+0x60/0xe0
[<ffffffff8120e44b>] ecryptfs_initialize_file+0x6b/0x140
[<ffffffff8120e54d>] ecryptfs_create+0x2d/0x60
[<ffffffff8113a7d4>] vfs_create+0xb4/0xe0
[<ffffffff8113a8c4>] __open_namei_create+0xc4/0x110
[<ffffffff8113d1c1>] do_filp_open+0xa01/0xae0
[<ffffffff8129a93e>] ? _raw_spin_unlock+0x5e/0xb0
[<ffffffff8155410b>] ? _spin_unlock+0x2b/0x40
[<ffffffff81139e9b>] ? getname+0x3b/0x240
[<ffffffff81148a5a>] ? alloc_fd+0xfa/0x140
[<ffffffff8112d8d9>] do_sys_open+0x69/0x140
[<ffffffff81553b8f>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff8112d9f0>] sys_open+0x20/0x30
[<ffffffff81013132>] system_call_fastpath+0x16/0x1b
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
In ecryptfs_destroy_inode(), inode_info->lower_file_mutex is locked,
and just after the mutex is unlocked, the code does:
kmem_cache_free(ecryptfs_inode_info_cache, inode_info);
This means that if another context could possibly try to take the same
mutex as ecryptfs_destroy_inode(), then it could end up getting the
mutex just before the data structure containing the mutex is freed.
So any such use would be an obvious use-after-free bug (catchable with
slab poisoning or mutex debugging), and therefore the locking in
ecryptfs_destroy_inode() is not needed and can be dropped.
Similarly, in ecryptfs_destroy_crypt_stat(), crypt_stat->keysig_list_mutex
is locked, and then the mutex is unlocked just before the code does:
memset(crypt_stat, 0, sizeof(struct ecryptfs_crypt_stat));
Therefore taking this mutex is similarly not necessary.
Removing this locking fixes false-positive lockdep reports such as the
following (and they are false-positives for exactly the same reason
that the locking is not needed):
=================================
[ INFO: inconsistent lock state ]
2.6.31-2-generic #14~rbd3
---------------------------------
inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
kswapd0/323 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&inode_info->lower_file_mutex){+.+.?.}, at: [<ffffffff81210d34>] ecryptfs_destroy_inode+0x34/0x100
{RECLAIM_FS-ON-W} state was registered at:
[<ffffffff8108c02c>] mark_held_locks+0x6c/0xa0
[<ffffffff8108c10f>] lockdep_trace_alloc+0xaf/0xe0
[<ffffffff81125a51>] kmem_cache_alloc+0x41/0x1a0
[<ffffffff8113117a>] get_empty_filp+0x7a/0x1a0
[<ffffffff8112dd46>] dentry_open+0x36/0xc0
[<ffffffff8121a36c>] ecryptfs_privileged_open+0x5c/0x2e0
[<ffffffff81210283>] ecryptfs_init_persistent_file+0xa3/0xe0
[<ffffffff8120e838>] ecryptfs_lookup_and_interpose_lower+0x278/0x380
[<ffffffff8120f97a>] ecryptfs_lookup+0x12a/0x250
[<ffffffff8113930a>] real_lookup+0xea/0x160
[<ffffffff8113afc8>] do_lookup+0xb8/0xf0
[<ffffffff8113b518>] __link_path_walk+0x518/0x870
[<ffffffff8113bd9c>] path_walk+0x5c/0xc0
[<ffffffff8113be5b>] do_path_lookup+0x5b/0xa0
[<ffffffff8113bfe7>] user_path_at+0x57/0xa0
[<ffffffff811340dc>] vfs_fstatat+0x3c/0x80
[<ffffffff8113424b>] vfs_stat+0x1b/0x20
[<ffffffff81134274>] sys_newstat+0x24/0x50
[<ffffffff81013132>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
irq event stamp: 7811
hardirqs last enabled at (7811): [<ffffffff810c037f>] call_rcu+0x5f/0x90
hardirqs last disabled at (7810): [<ffffffff810c0353>] call_rcu+0x33/0x90
softirqs last enabled at (3764): [<ffffffff810631da>] __do_softirq+0x14a/0x220
softirqs last disabled at (3751): [<ffffffff8101440c>] call_softirq+0x1c/0x30
other info that might help us debug this:
2 locks held by kswapd0/323:
#0: (shrinker_rwsem){++++..}, at: [<ffffffff810f67ed>] shrink_slab+0x3d/0x190
#1: (&type->s_umount_key#35){.+.+..}, at: [<ffffffff811429a1>] prune_dcache+0xd1/0x1b0
stack backtrace:
Pid: 323, comm: kswapd0 Tainted: G C 2.6.31-2-generic #14~rbd3
Call Trace:
[<ffffffff8108ad6c>] print_usage_bug+0x18c/0x1a0
[<ffffffff8108aff0>] ? check_usage_forwards+0x0/0xc0
[<ffffffff8108bac2>] mark_lock_irq+0xf2/0x280
[<ffffffff8108bd87>] mark_lock+0x137/0x1d0
[<ffffffff81164710>] ? fsnotify_clear_marks_by_inode+0x30/0xf0
[<ffffffff8108bee6>] mark_irqflags+0xc6/0x1a0
[<ffffffff8108d337>] __lock_acquire+0x287/0x430
[<ffffffff8108d585>] lock_acquire+0xa5/0x150
[<ffffffff81210d34>] ? ecryptfs_destroy_inode+0x34/0x100
[<ffffffff8108d2e7>] ? __lock_acquire+0x237/0x430
[<ffffffff815526ad>] __mutex_lock_common+0x4d/0x3d0
[<ffffffff81210d34>] ? ecryptfs_destroy_inode+0x34/0x100
[<ffffffff81164710>] ? fsnotify_clear_marks_by_inode+0x30/0xf0
[<ffffffff81210d34>] ? ecryptfs_destroy_inode+0x34/0x100
[<ffffffff8129a91e>] ? _raw_spin_unlock+0x5e/0xb0
[<ffffffff81552b36>] mutex_lock_nested+0x46/0x60
[<ffffffff81210d34>] ecryptfs_destroy_inode+0x34/0x100
[<ffffffff81145d27>] destroy_inode+0x87/0xd0
[<ffffffff81146b4c>] generic_delete_inode+0x12c/0x1a0
[<ffffffff81145832>] iput+0x62/0x70
[<ffffffff811423c8>] dentry_iput+0x98/0x110
[<ffffffff81142550>] d_kill+0x50/0x80
[<ffffffff81142623>] prune_one_dentry+0xa3/0xc0
[<ffffffff811428b1>] __shrink_dcache_sb+0x271/0x290
[<ffffffff811429d9>] prune_dcache+0x109/0x1b0
[<ffffffff81142abf>] shrink_dcache_memory+0x3f/0x50
[<ffffffff810f68dd>] shrink_slab+0x12d/0x190
[<ffffffff810f9377>] balance_pgdat+0x4d7/0x640
[<ffffffff8104c4c0>] ? finish_task_switch+0x40/0x150
[<ffffffff810f63c0>] ? isolate_pages_global+0x0/0x60
[<ffffffff810f95f7>] kswapd+0x117/0x170
[<ffffffff810777a0>] ? autoremove_wake_function+0x0/0x40
[<ffffffff810f94e0>] ? kswapd+0x0/0x170
[<ffffffff810773be>] kthread+0x9e/0xb0
[<ffffffff8101430a>] child_rip+0xa/0x20
[<ffffffff81013c90>] ? restore_args+0x0/0x30
[<ffffffff81077320>] ? kthread+0x0/0xb0
[<ffffffff81014300>] ? child_rip+0x0/0x20
Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
ecryptfs_passthrough is a mount option that allows eCryptfs to allow
data to be written to non-eCryptfs files in the lower filesystem. The
passthrough option was causing data corruption due to it not always
being treated as a non-eCryptfs file.
The first 8 bytes of an eCryptfs file contains the decrypted file size.
This value was being written to the non-eCryptfs files, too. Also,
extra 0x00 characters were being written to make the file size a
multiple of PAGE_CACHE_SIZE.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
If ecryptfs_encrypted_view or ecryptfs_xattr_metadata were being
specified as mount options, a NULL pointer dereference of crypt_stat
was possible during lookup.
This patch moves the crypt_stat assignment into
ecryptfs_lookup_and_interpose_lower(), ensuring that crypt_stat
will not be NULL before we attempt to dereference it.
Thanks to Dan Carpenter and his static analysis tool, smatch, for
finding this bug.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Acked-by: Dustin Kirkland <kirkland@canonical.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When allocating the memory used to store the eCryptfs header contents, a
single, zeroed page was being allocated with get_zeroed_page().
However, the size of an eCryptfs header is either PAGE_CACHE_SIZE or
ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE (8192), whichever is larger, and is
stored in the file's private_data->crypt_stat->num_header_bytes_at_front
field.
ecryptfs_write_metadata_to_contents() was using
num_header_bytes_at_front to decide how many bytes should be written to
the lower filesystem for the file header. Unfortunately, at least 8K
was being written from the page, despite the chance of the single,
zeroed page being smaller than 8K. This resulted in random areas of
kernel memory being written between the 0x1000 and 0x1FFF bytes offsets
in the eCryptfs file headers if PAGE_SIZE was 4K.
This patch allocates a variable number of pages, calculated with
num_header_bytes_at_front, and passes the number of allocated pages
along to ecryptfs_write_metadata_to_contents().
Thanks to Florian Streibelt for reporting the data leak and working with
me to find the problem. 2.6.28 is the only kernel release with this
vulnerability. Corresponds to CVE-2009-0787
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Acked-by: Dustin Kirkland <kirkland@canonical.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Eugene Teo <eugeneteo@kernel.sg>
Cc: Greg KH <greg@kroah.com>
Cc: dann frazier <dannf@dannf.org>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Florian Streibelt <florian@f-streibelt.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
eCryptfs has file encryption keys (FEK), file encryption key encryption
keys (FEKEK), and filename encryption keys (FNEK). The per-file FEK is
encrypted with one or more FEKEKs and stored in the header of the
encrypted file. I noticed that the FEK is also being encrypted by the
FNEK. This is a problem if a user wants to use a different FNEK than
their FEKEK, as their file contents will still be accessible with the
FNEK.
This is a minimalistic patch which prevents the FNEKs signatures from
being copied to the inode signatures list. Ultimately, it keeps the FEK
from being encrypted with a FNEK.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Acked-by: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The addition of filename encryption caused a regression in unencrypted
filename symlink support. ecryptfs_copy_filename() is used when dealing
with unencrypted filenames and it reported that the new, copied filename
was a character longer than it should have been.
This caused the return value of readlink() to count the NULL byte of the
symlink target. Most applications don't care about the extra NULL byte,
but a version control system (bzr) helped in discovering the bug.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Flesh out the comments for ecryptfs_decode_from_filename(). Remove the
return condition, since it is always 0.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct several format string data type specifiers. Correct filename size
data types; they should be size_t rather than int when passed as
parameters to some other functions (although note that the filenames will
never be larger than int).
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
%Z is a gcc-ism. Using %z instead.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the requisite modifications to ecryptfs_filldir(), ecryptfs_lookup(),
and ecryptfs_readlink() to call out to filename encryption functions.
Propagate filename encryption policy flags from mount-wide crypt_stat to
inode crypt_stat.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These functions support encrypting and encoding the filename contents.
The encrypted filename contents may consist of any ASCII characters. This
patch includes a custom encoding mechanism to map the ASCII characters to
a reduced character set that is appropriate for filenames.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Extensions to the header file to support filename encryption.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset implements filename encryption via a passphrase-derived
mount-wide Filename Encryption Key (FNEK) specified as a mount parameter.
Each encrypted filename has a fixed prefix indicating that eCryptfs should
try to decrypt the filename. When eCryptfs encounters this prefix, it
decodes the filename into a tag 70 packet and then decrypts the packet
contents using the FNEK, setting the filename to the decrypted filename.
Both unencrypted and encrypted filenames can reside in the same lower
filesystem.
Because filename encryption expands the length of the filename during the
encoding stage, eCryptfs will not properly handle filenames that are
already near the maximum filename length.
In the present implementation, eCryptfs must be able to produce a match
against the lower encrypted and encoded filename representation when given
a plaintext filename. Therefore, two files having the same plaintext name
will encrypt and encode into the same lower filename if they are both
encrypted using the same FNEK. This can be changed by finding a way to
replace the prepended bytes in the blocked-aligned filename with random
characters; they are hashes of the FNEK right now, so that it is possible
to deterministically map from a plaintext filename to an encrypted and
encoded filename in the lower filesystem. An implementation using random
characters will have to decode and decrypt every single directory entry in
any given directory any time an event occurs wherein the VFS needs to
determine whether a particular file exists in the lower directory and the
decrypted and decoded filenames have not yet been extracted for that
directory.
Thanks to Tyler Hicks and David Kleikamp for assistance in the development
of this patchset.
This patch:
A tag 70 packet contains a filename encrypted with a Filename Encryption
Key (FNEK). This patch implements functions for writing and parsing tag
70 packets. This patch also adds definitions and extends structures to
support filename encryption.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <dustin.kirkland@gmail.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Tyler Hicks <tchicks@us.ibm.com>
Cc: David Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When ecryptfs allocates space to write crypto headers into, before copying
it out to file headers or to xattrs, it looks at the value of
crypt_stat->num_header_bytes_at_front to determine how much space it
needs. This is also used as the file offset to the actual encrypted data,
so for xattr-stored crypto info, the value was zero.
So, we kzalloc'd 0 bytes, and then ran off to write to that memory.
(Which returned as ZERO_SIZE_PTR, so we explode quickly).
The right answer is to always allocate a page to write into; the current
code won't ever write more than that (this is enforced by the
(PAGE_CACHE_SIZE - offset) length in the call to
ecryptfs_generate_key_packet_set). To be explicit about this, we now send
in a "max" parameter, rather than magically using PAGE_CACHE_SIZE there.
Also, since the pointer we pass down the callchain eventually gets the
virt_to_page() treatment, we should be using a alloc_page variant, not
kzalloc (see also 7fcba05437)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With SLUB debugging turned on in 2.6.26, I was getting memory corruption
when testing eCryptfs. The root cause turned out to be that eCryptfs was
doing kmalloc(PAGE_CACHE_SIZE); virt_to_page() and treating that as a nice
page-aligned chunk of memory. But at least with SLUB debugging on, this
is not always true, and the page we get from virt_to_page does not
necessarily match the PAGE_CACHE_SIZE worth of memory we got from kmalloc.
My simple testcase was 2 loops doing "rm -f fileX; cp /tmp/fileX ." for 2
different multi-megabyte files. With this change I no longer see the
corruption.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes the following sparse warnings:
fs/ecryptfs/crypto.c:1036:8: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1038:8: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1077:10: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1103:6: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1105:6: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1124:8: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1241:21: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1244:30: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1414:23: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1417:32: warning: cast to restricted __be16
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the no longer used ecryptfs_header_cache_0.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Moyer pointed out that a mount; umount loop of ecryptfs, with the same
cipher & other mount options, created a new ecryptfs_key_tfm_cache item
each time, and the cache could grow quite large this way.
Looking at this with mhalcrow, we saw that ecryptfs_parse_options()
unconditionally called ecryptfs_add_new_key_tfm(), which is what was adding
these items.
Refactor ecryptfs_get_tfm_and_mutex_for_cipher_name() to create a new
helper function, ecryptfs_tfm_exists(), which checks for the cipher on the
cached key_tfm_list, and sets a pointer to it if it exists. This can then
be called from ecryptfs_parse_options(), and new key_tfm's can be added
only when a cached one is not found.
With list locking changes suggested by akpm.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only the lower byte of cipher_code is ever used, so it makes sense
for its type to be u8.
Signed-off-by: Trevor Highland <trevor.highland@gmail.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The printk statements that result when the user does not have the
proper key available could use some refining.
Signed-off-by: Mike Halcrow <mhalcrow@us.ibm.com>
Cc: Mike Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to keep re-setting the same key for any given eCryptfs inode.
This patch optimizes the use of the crypto API and helps performance a bit.
Signed-off-by: Trevor Highland <trevor.highland@gmail.com>
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove internal references to header extents; just keep track of header bytes
instead. Headers can easily span multiple pages with the recent persistent
file changes.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- make the following needlessly global code static:
- crypto.c:ecryptfs_lower_offset_for_extent()
- crypto.c:key_tfm_list
- crypto.c:key_tfm_list_mutex
- inode.c:ecryptfs_getxattr()
- main.c:ecryptfs_init_persistent_file()
- remove the no longer used mmap.c:ecryptfs_lower_page_cache
- #if 0 the unused read_write.c:ecryptfs_read()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thanks to Josef Bacik for finding these.
A couple of ecryptfs error paths don't properly unlock things they locked.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Josef Bacik <jbacik@redhat.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Passing a cipher name > 32 chars on mount results in an overflow when the
cipher name is printed, because the last character in the struct
ecryptfs_key_tfm's cipher_name string was never zeroed.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The extent_offset is getting incremented twice per loop iteration through any
given page. It should only be getting incremented once. This bug should only
impact hosts with >4K page sizes.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes the errors made in the users of the crypto layer during
the sg_init_table conversion. It also adds a few conversions that were
missing altogether.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.
Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The functions that eventually call down to ecryptfs_read_lower(),
ecryptfs_decrypt_page(), and ecryptfs_copy_up_encrypted_with_header()
should have the responsibility of managing the page Uptodate
status. This patch gets rid of some of the ugliness that resulted from
trying to push some of the page flag setting too far down the stack.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
