The devm_request_threaded_irq() now automatically logs detailed error
messages on failure. This eliminates the need for driver-specific
dev_err() calls that previously printed generic messages.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://patch.msgid.link/20260709023048.599150-11-panchuang@vivo.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
evaluate_odvp() creates per-ODVP sysfs files before the thermal zone
and later probe resources are registered. The current unwind path only
calls cleanup_odvp() from the late sysfs failure path, so failures after
evaluate_odvp() but before that label, including
thermal_tripless_zone_device_register() failures, leave the ODVP files
and storage behind.
Move the ODVP cleanup to the common ART/TRT unwind path so every failure
after evaluate_odvp() releases the ODVP state. Also clear the cached
ODVP pointers in cleanup_odvp(), because evaluate_odvp() can already call
it for partial setup failures while probe continues.
Fixes: 006f006f1e ("thermal/int340x_thermal: Export OEM vendor variables")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260623015140.19300-1-pengpeng@iscas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
proc_thermal_rfim_add() can create the FIVR and DLVR sysfs groups
before creating the DVFS group.
If DVFS group creation fails while both earlier groups are enabled, the
current error handling removes only one group: the FIVR branch returns
before the DLVR cleanup branch can run. This leaves the DLVR group
behind even though RFIM setup fails.
Use one DVFS failure path that removes all previously created RFIM
groups before returning the error.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260615065245.84252-1-pengpeng@iscas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
proc_thermal_ptc_add() ignores the return value of ptc_create_groups()
causing the driver to silenty continue even if sysfs group creation
fails.
The thermal control interface would be unavailable with no indication
of failure.
Check the return value and on failure clean up any sysfs groups that
were successfully created before the error, then propagate the error to
the caller which already handles it correctly via goto err_rem_rapl.
Signed-off-by: Aravind Anilraj <aravindanilraj0702@gmail.com>
Link: https://patch.msgid.link/20260329070642.10721-3-aravindanilraj0702@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The value parameter is u32 but is shifted into a u64 register value
without casting first. If the shift amount pushes bits beyond 32, they
are lost. Cast value to u64 before shifting to ensure all bits are
preserved.
Signed-off-by: Aravind Anilraj <aravindanilraj0702@gmail.com>
Link: https://patch.msgid.link/20260329070642.10721-2-aravindanilraj0702@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix thermal core issues related to thermal zone removal and
registration errors that may lead to a use-after-free or a memory
leak in some cases (Rafael Wysocki)
- Drop a redundant check from thermal_zone_device_update(), adjust
thermal workqueue allocation flags, and switch over thermal_class
allocation to static (Rafael Wysocki)
- Relocate the suspend and resume of thermal zones closer to the
suspend and resume of devices, respectively (Rafael Wysocki)
- Remove a pointless variable used in the thermal core when
registering a cooling device (Daniel Lezcano)
- Replace sprintf() in thermal_bind_cdev_to_trip() and use
str_enabled_disabled() helper in mode_show() (Thorsten Blum)
- Replace cpumask_weight() in intel_hfi_offline() with cpumask_empty()
which is generally more efficient (Yury Norov)
- Add support for reading DDR data rate from PCI config space on Nova
Lake platforms to the int340x thermal driver (Srinivas Pandruvada)
- Add an OF node address to output message to make sensor names more
distinguishable (Alexander Stein)
- Add hwmon support for the i.MX97 thermal sensor (Alexander Stein)
- Clamp correctly the results when doing value/temperature conversion
in the Spreadtrum driver (Thorsten Blum)
- Add SDM670 compatible DT bindings for the Tsens and the lMH thermal
drivers (Richard Acayan)
- Add SM8750 compatible DT bindings for the Tsens thermal driver (Manaf
Meethalavalappu Pallikunhi)
- Add Eliza SoC compatible DT bindings for the Tsens driver (Krzysztof
Kozlowski)
- Fix inverted condition check on error in the Spear thermal control
driver (Gopi Krishna Menon)
- Convert DT bindings documentation into DT schema (Gopi Krishna Menon)
- Use max() macro to increase readability in the Broadcom STB thermal
sensor (Thorsten Blum)
- Remove a stale @trim_offset kernel-doc entry (John Madieu)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmnZBFwSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1CIAH/jT/z4QMvfBCIlTgwTN6ArqmbEPBoufI
yhwyH/9gYEoJ5qvBBYWRu+NbiKIcQGdQ4bIVMbrYREqUAqZtD0ICTyysWKyxN0xC
2Y+a1uyx5Q73Ac4s2+GNhNIykpFLeODSkHX4wHmA8DSjCdSLvqtfewK09XxoFKiP
Gdb1mhihdEQREC2nfqOpWtxeRp90AK3Ak1Obvf4+95i2KYrQgrmaxXIGFH1Q7IQu
4Va4/7ZEdFPmBTS3vpI3wNjFb5SDHtaP8/FUc/vVohs7if4mGT2JI94oE5ic/+bc
RpCHvii51hHIs0VUJAqkzJwNIH1/3F3UDbiJtkV0sW9tYj02I8dLYPM=
=m1xx
-----END PGP SIGNATURE-----
Merge tag 'thermal-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These include thermal core fixes and simplifications, driver fixes and
new hardware support (SDM670, Eliza SoC), new driver features (hwmon
support in imx91, DDR data rate on Nova Lake in int340x), and a
handful of cleanups:
- Fix thermal core issues related to thermal zone removal and
registration errors that may lead to a use-after-free or a memory
leak in some cases (Rafael Wysocki)
- Drop a redundant check from thermal_zone_device_update(), adjust
thermal workqueue allocation flags, and switch over thermal_class
allocation to static (Rafael Wysocki)
- Relocate the suspend and resume of thermal zones closer to the
suspend and resume of devices, respectively (Rafael Wysocki)
- Remove a pointless variable used in the thermal core when
registering a cooling device (Daniel Lezcano)
- Replace sprintf() in thermal_bind_cdev_to_trip() and use
str_enabled_disabled() helper in mode_show() (Thorsten Blum)
- Replace cpumask_weight() in intel_hfi_offline() with
cpumask_empty() which is generally more efficient (Yury Norov)
- Add support for reading DDR data rate from PCI config space on Nova
Lake platforms to the int340x thermal driver (Srinivas Pandruvada)
- Add an OF node address to output message to make sensor names more
distinguishable (Alexander Stein)
- Add hwmon support for the i.MX97 thermal sensor (Alexander Stein)
- Clamp correctly the results when doing value/temperature conversion
in the Spreadtrum driver (Thorsten Blum)
- Add SDM670 compatible DT bindings for the Tsens and the lMH thermal
drivers (Richard Acayan)
- Add SM8750 compatible DT bindings for the Tsens thermal driver
(Manaf Meethalavalappu Pallikunhi)
- Add Eliza SoC compatible DT bindings for the Tsens driver
(Krzysztof Kozlowski)
- Fix inverted condition check on error in the Spear thermal control
driver (Gopi Krishna Menon)
- Convert DT bindings documentation into DT schema (Gopi Krishna
Menon)
- Use max() macro to increase readability in the Broadcom STB thermal
sensor (Thorsten Blum)
- Remove a stale @trim_offset kernel-doc entry (John Madieu)"
* tag 'thermal-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
thermal: renesas: rzg3e: Remove stale @trim_offset kernel-doc entry
thermal: core: Suspend thermal zones later and resume them earlier
thermal: core: Allocate thermal_class statically
thermal: core: Adjust thermal_wq allocation flags
thermal: core: Drop redundant check from thermal_zone_device_update()
thermal: core: Free thermal zone ID later during removal
thermal: core: Fix thermal zone governor cleanup issues
thermal/core: Remove pointless variable when registering a cooling device
thermal/drivers/brcmstb_thermal: Use max to simplify brcmstb_get_temp
dt-bindings: thermal: st,thermal-spear1340: convert to dtschema
thermal/drivers/spear: Fix error condition for reading st,thermal-flags
dt-bindings: thermal: qcom-tsens: Add Eliza SoC TSENS
thermal: devfreq_cooling: avoid unnecessary kfree of freq_table
thermal: intel: hfi: use cpumask_empty() in intel_hfi_offline()
thermal: sysfs: Use str_enabled_disabled() helper in mode_show()
dt-bindings: thermal: qcom-tsens: Document the SM8750 Temperature Sensor
thermal/drivers/sprd: Use min instead of clamp in sprd_thm_temp_to_rawdata
dt-bindings: thermal: lmh: Add SDM670 compatible
dt-bindings: thermal: tsens: add SDM670 compatible
thermal/drivers/sprd: Fix raw temperature clamping in sprd_thm_rawdata_to_temp
...
Merge power capping updates for 7.1-rc1:
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping core
code (Randy Dunlap)
* pm-powercap:
powercap: intel_rapl: Consolidate PL4 and PMU support flags into rapl_defaults
powercap: intel_rapl: Move MSR primitives to MSR driver
thermal: intel: int340x: processor: Move MMIO primitives to MMIO driver
powercap: intel_rapl: Move TPMI primitives to TPMI driver
powercap: intel_rapl: Move primitive info to header for interface drivers
powercap: intel_rapl: Remove unused macro definitions
powercap: intel_rapl: Move MSR default settings into MSR interface driver
powercap: intel_rapl: Remove unused AVERAGE_POWER primitive
powercap: correct kernel-doc function parameter names
thermal: intel: int340x: processor: Move RAPL defaults to MMIO driver
powercap: intel_rapl: Move TPMI default settings into TPMI interface driver
powercap: intel_rapl: Allow interface drivers to configure rapl_defaults
powercap: intel_rapl: Use unit conversion macros from units.h
powercap: intel_rapl: Use GENMASK() and BIT() macros
powercap: intel_rapl: Use shifts for power-of-2 operations
powercap: intel_rapl: Simplify rapl_compute_time_window_atom()
powercap: intel_rapl: Remove unused TIME_WINDOW macros
powercap: intel_rapl: Cleanup coding style
powercap: intel_rapl: Add a symbol namespace for intel_rapl exports
MMIO-specific primitives differ from those used by the TPMI interface.
The MSR and MMIO interfaces shared the same primitives in the common
driver, but MMIO does not require many MSR-specific entries (like PSYS).
Keeping these in the common driver does not add any value and requires
interface-specific handling logic that makes the common layer
unnecessarily complex.
Move the MMIO primitive definitions and associated bitmasks into the
MMIO interface driver. This change includes:
1. Add MMIO-local struct rapl_primitive_info instance without
MSR-specific entries and assign it to priv->rpi during MMIO
initialization.
2. Remove the RAPL MMIO case from rapl_config() in the common driver.
No functional changes are intended.
Co-developed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20260331211950.3329932-6-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The slider offset can be set via debugfs for balanced mode. The offset
should be only applicable in balanced mode. For other modes, it should
be 0 when writing to MMIO offset,
Fixes: 8306bcaba0 ("thermal: intel: int340x: Add module parameter to change slider offset")
Tested-by: Erin Park <erin.park@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 6.18+ <stable@vger.kernel.org> # 6.18+
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/20260324172346.3317145-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Previously, the MMIO and MSR RAPL interfaces shared the same set of
RAPL defaults provided by common code. However, unlike the MSR
interface, the MMIO RAPL interface does not require CPU-specific
variations in its default handling. Keeping the RAPL defaults in
the RAPL common driver therefore provides no additional benefit.
Move the MMIO defaults into the MMIO interface driver. This change
includes the following updates:
* Introduce a MMIO-local rapl_defaults instance with the appropriate
default callbacks.
* Assign the MMIO-specific rapl_defaults to priv->defaults during
MMIO driver initialization.
No functional changes are expected.
Co-developed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260212233044.329790-11-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cleanup of the intel_rapl common driver requires introducing additional
exported helper and lifecycle functions. Before adding new exports,
create a dedicated symbol namespace for intel_rapl and update the
relevant interface drivers to explicitly import it.
This makes the intended usage of these symbols explicit, avoids
polluting the global namespace, and prepares the codebase for the
ongoing RAPL refactoring.
No functional changes are intended.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260212233044.329790-2-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for reading DDR data rate from PCI config offset.
The register details are:
CFG Offset : 0xE0
Bits : 11:2
DDR Data rate is in 33.33 MTPS units.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Rearrange code to avoid using goto and make declarations consistent ]
Link: https://patch.msgid.link/20260223190420.874853-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
When DLVR sysfs group creation fails in proc_thermal_rfim_add(),
the function returns immediately without cleaning up the FIVR group
that may have been created earlier.
Add proper error unwinding to remove the FIVR group before returning
failure.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/LV3PR11MB876881B77D32A2854AD2908EF563A@LV3PR11MB8768.namprd11.prod.outlook.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace sprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show
functions.
sysfs_emit() and sysfs_emit_at() are preferred to format sysfs output
as they provide better bounds checking.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject adjustment, changelog edits ]
Link: https://patch.msgid.link/20251220223026.125678-1-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On processors starting from Panther Lake, additional workload type hints
are provided.
The hardware analyzes workload residencies over an extended period to
determine whether the workload classification tends toward idle/battery
life states or sustained/performance states. Based on this long-term
analysis, it classifies:
Power Classification: If the workload exhibits more idle or battery
life residencies, it is classified as "power". This is indicated by
setting bit 4 of the current workload type.
Performance Classification: If the workload exhibits more sustained
or performance residencies, it is classified as "performance". This
is indicated by clearing bit 4 of the current workload type.
This approach enables applications to ignore short-term workload
fluctuations and instead respond to longer-term power vs. performance
trends. Hints of this type are called slow workload hints.
To get notifications for slow workload hints, bit 22 in the thermal
mailbox can be used for configuring workload interrupts. It is possible
to exclusively enable slow workload hints or enable them in addition to
the current workload hints.
To enable slow workload hints, a new sysfs attribute is added to the
existing workload hint attributes:
workload_slow_hint_enable (RW): Write 1 to enable, 0 to disable.
Reading this attribute shows the current state.
This attribute is not present on any previous generation of processors.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Dropped redundant local variables, changelog edits ]
Link: https://patch.msgid.link/20251218222559.4110027-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Set the PROC_THERMAL_FEATURE_SOC_POWER_SLIDER feature flag in
proc_thermal_pci_ids[] for Wildcat Lake to enable power slider interface.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251205230007.2218533-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add Nova Lake processor thermal device to the int340x
processor_thermal driver, add DLVR support for Nova Lake to it,
add Nova Lake support to the ACPI DPTF code, document thermal
throttling on Intel platforms, and update workload type hint
interface documentation (Srinivas Pandruvada)
- Remove int340x thermal scan handler from the ACPI DPTF code
because it turned out to be unnecessary (Slawomir Rosek)
- Clean up the Intel int340x thermal driver (Kaushlendra Kumar)
- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS() in R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for QCom Tsens (Gaurav Kohli)
- Add support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmkpt1cSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1cikH/jW6IUXUvrTy9VEi3wGTzLAcnOuJJtQL
zKQBzrjtuGngr4xIeE+chr9Gr8+S4EfVcD17twp59I6C3T9fBZngfMxbi7VLdyd7
gIJs2IxIqfIlQwK32lBOkLM2/YHa0AYU3Dd/YHsgYOU3Y25adSvmiwoTqG3kUmXB
YnoHUobPskzV/9iKf2sptM7XBLDaBdoPHcDAM2BN4rfKhgOy/1ha7KzigJyuHHyW
V+b9KR/IlFOVct8OrvhXKT4mzsS9VZv6IJ6KrRsDsCIgVwM/fO1YTmRgfOkuRASZ
fw6vNNi+49xK0LN8zEvHKuYthBFy+7lIP+MiErMr2Fw5nuY2uXitZA8=
=OgXe
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add Nova Lake processor support to the Intel thermal drivers and
DPTF code, update thermal control documentation, simplify the ACPI
DPTF code related to thermal control, add QCS8300 compatible to the
tsens thermal DT bindings, add DT bindings for NXP i.MX91 thermal
module and add support for it to the imx91 thermal driver, update a
few other thermal drivers and fix a format string issue in a thermal
utility:
- Add Nova Lake processor thermal device to the int340x
processor_thermal driver, add DLVR support for Nova Lake to it, add
Nova Lake support to the ACPI DPTF code, document thermal
throttling on Intel platforms, and update workload type hint
interface documentation (Srinivas Pandruvada)
- Remove int340x thermal scan handler from the ACPI DPTF code because
it turned out to be unnecessary (Slawomir Rosek)
- Clean up the Intel int340x thermal driver (Kaushlendra Kumar)
- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek
Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS() in R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for QCom Tsens (Gaurav Kohli)
- Add support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)"
* tag 'thermal-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
docs: driver-api/thermal/intel_dptf: Add new workload type hint
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
Documentation: thermal: Document thermal throttling on Intel platforms
ACPI: DPTF: Support Nova Lake
thermal: intel: int340x: Add DLVR support for Nova Lake
thermal: int340x: processor_thermal: Add Nova Lake processor thermal device
thermal: intel: int340x: Replace sprintf() with sysfs_emit()
thermal: intel: int340x: Use symbolic constant for UUID comparison
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
ACPI: DPTF: Remove int340x thermal scan handler
thermal: intel: Select INT340X_THERMAL from INTEL_SOC_DTS_THERMAL
The current read_raw() implementation of the TPMI, MMIO and MSR
interfaces does not distinguish between atomic and non-atomic callers.
rapl_msr_read_raw() uses rdmsrq_safe_on_cpu(), which can sleep and
issue cross CPU calls. When MSR-based RAPL PMU support is enabled, PMU
event handlers can invoke this function from atomic context where
sleeping or rescheduling is not allowed. In atomic context, the caller
is already executing on the target CPU, so a direct rdmsrq() is
sufficient.
To support such usage, introduce an atomic flag to the read_raw()
interface to allow callers pass the context information. Modify the
common RAPL code to propagate this flag, and set the flag to reflect
the calling contexts.
Utilize the atomic flag in rapl_msr_read_raw() to perform direct MSR
read with rdmsrq() when running in atomic context, and a sanity check
to ensure target CPU matches the current CPU for such use cases.
The TPMI and MMIO implementations do not require special atomic
handling, so the flag is ignored in those paths.
This is a preparatory patch for adding MSR-based RAPL PMU support.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject tweak ]
Link: https://patch.msgid.link/20251121000539.386069-2-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for DLVR (Digital Linear Voltage Regulator) for Nova Lake.
There are no new sysfs attributes or difference in operations compared
to prior generations.
MMIO offset and bit positions are changed. Also no mapping is required
as units are already in MHz.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251111004552.137984-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace sprintf() calls with sysfs_emit() in sysfs "show" functions to
follow current kernel coding standards.
sysfs_emit() is the preferred method for formatting sysfs output as it
provides better bounds checking and is more secure.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
[ rjw: Subject adjustments, changelog edits ]
Link: https://patch.msgid.link/20251030053410.311656-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace sizeof() with a symbolic constant for UUID matching to maintain
existing ABI behavior while improving code clarity. The current behavior
of comparing only the first 7 characters is sufficient to distinguish
all UUIDs and changing to full string comparison would alter the kernel
ABI, potentially breaking existing userspace applications.
Use a defined constant to make the truncated comparison explicit and
maintainable.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
[ rjw: Subject adjustments ]
Link: https://patch.msgid.link/20251030035955.62171-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the module parameter slider_balance is set to the performance
slider value of 0, the SoC slider profile switches to the performance
mode.
This can cause the Linux power-profiles-daemon to change the system
power mode to performance from balanced mode. This happens when there
is only one platform profile registered as there will be no conflict
with other platform profiles.
Same issue occurs when the slider_balance is set to the power-saver
slider value.
Prevent module parameter slider_balance from overlapping with
performance and power-saver slider values by adding range validation.
Return an error when an invalid value is provided.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250923205631.3056590-1-srinivas.pandruvada@linux.intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
SoC slider value is set by the user (or the default when user has not
modified it). To enhance power efficiency dynamically, the firmware can
optionally auto-adjust the slider value based on the current workload.
This adjustment is governed by an additional parameter known as the
"slider offset". This offset permits the firmware to increase the slider
value up to and including "SoC slider + slider offset".
Add a module parameter to specify this "slier offset" value.
By default, the SoC slider offset is set to 0. This means that SoC is not
allowed to switch slider position.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250825132315.75521-5-srinivas.pandruvada@linux.intel.com
[ rjw: Comment and module param description adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
By default, the SoC slider value for the "balanced" platform profile is
set to 3. This update introduces a new module parameter, allowing users
to modify this default value.
The module parameter can be specified during load time to set a custom
slider value for the "balanced" profile. If the module parameter is not
specified at load time and is updated later, the new value will only take
effect after the next write of "balanced" to the sysfs "profile"
attribute.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250825132315.75521-4-srinivas.pandruvada@linux.intel.com
[ rjw: Minor adjustments of module param description ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Set the PROC_THERMAL_FEATURE_SOC_POWER_SLIDER feature flag in
proc_thermal_pci_ids[] for Panther Lake to enable power slider interface.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250825132315.75521-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for system wide energy performance preference using a SoC
slider interface defined via processor thermal PCI device MMIO space.
Using Linux platform-profile class API, register a new platform profile.
Provide three platform power profile choices:
"performance", "balanced" and "low-power".
Profile sysfs is located at:
/sys/class/platform-profile/platform-profile-*
where attribute "name" is presented as "SoC Power Slider".
At boot by default the slider is set to balanced mode. This profile is
changed by user space based on user preference via power profile daemon
or directly writing to the "profile" sysfs attribute.
Add a CPU model specific processor thermal device feature
PROC_THERMAL_FEATURE_SOC_POWER_SLIDER. When enabled for a CPU model,
slider interface is registered.
During system suspend callback save slider register and restore during
resume callback.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250825132315.75521-2-srinivas.pandruvada@linux.intel.com
[ rjw: Removal of redundant outer parens from one expression ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_object() returns an error if the needed method does not
exist, so remove an unnecessary acpi_has_method() call preceding it.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Link: https://patch.msgid.link/aIMQ9RFciI8jmmAh@pc
[ rjw: Subject adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Convert EAGAIN into ENODATA in temp_show() to prevent user space from
polling the sysfs file in vain after a failing O_NONBLOCK read under
the assumption that the read would have blocked (Hsin-Te Yuan)
- Add Wildcat Lake PCI ID to the int340x Intel processor thermal driver
(Srinivas Pandruvada)
- Add debugfs interface to override the temperature set by the firmware
in the Intel platform temperature control (PTC) interface and add a
new sysfs control attribute called thermal_tolerance to it (Srinivas
Pandruvada)
- Enable the stage 2 shutdown in the qcom-spmi-temp-alarm thermal
driver and add support for more SPMI variants to it (Anjelique
Melendez)
- Constify the thermal_zone_device_ops structure where possible in
several assorted thermal drivers (Christophe Jaillet)
- Use the dev_fwnode() helper instead of of_fwnode_handle(), as it is
more adequate, wherever possible in thermal drivers (Jiri Slaby)
- Implement and document One-Time Programmable fuse support in the
Rockchip thermal driver in order to increase the precision of the
measurements (Nicolas Frattaroli)
- Change the way the Mediatek LTVS thermal driver stores the
initialization data sequence to support different sequences
matching different platforms. Introduce mt7988 support with
a new initialization sequence (Mason Chang)
- Document the QCom TSens Milos Temperature Sensor DT bindings (Luca
Weiss)
- Add the fallback compatible string for MT7981 and MT8516 DT bindings
(Aleksander Jan Bajkowski)
- Add the compatible string for the Tegra210B01 SOC_THERM driver (Aaron
Kling)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmh/j4ESHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1r54IAImMVSzbSfMvvB0b1PDa2nEbBVt8xNEg
2BPwZv1CrdJXq95VJQDJQRmsdZVzzNIL0gRruyaXnSDa4zhyoNb3nXhjY7eNqhlP
2CBANscs7zgQ3DiAFuz3VJ7ns10KCAAEj2r3gdTxkm0MveOrDhOn3bLdr9+NN7P8
n0zo9p4W2RDXXXjTMJul0qliZpJoadDqN+fl2V/u7vPLcjlp1JBV84sZPKt8mGIe
o44Sp9NSjZ20GDpOPzXKJnK9RRQsxxs40x4d3C3kpmiagzMjyV3ku1K2e0FAucUv
Y0V91HiHCgdNSLa/Z4laIdFJc6Wa8tsEb7mItg96cPFmSCaFvcZPucM=
=ysPD
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These update the thermal control sysfs interface and multiple thermal
control drivers:
- Convert EAGAIN into ENODATA in temp_show() to prevent user space
from polling the sysfs file in vain after a failing O_NONBLOCK read
under the assumption that the read would have blocked (Hsin-Te
Yuan)
- Add Wildcat Lake PCI ID to the int340x Intel processor thermal
driver (Srinivas Pandruvada)
- Add debugfs interface to override the temperature set by the
firmware in the Intel platform temperature control (PTC) interface
and add a new sysfs control attribute called thermal_tolerance to
it (Srinivas Pandruvada)
- Enable the stage 2 shutdown in the qcom-spmi-temp-alarm thermal
driver and add support for more SPMI variants to it (Anjelique
Melendez)
- Constify the thermal_zone_device_ops structure where possible in
several assorted thermal drivers (Christophe Jaillet)
- Use the dev_fwnode() helper instead of of_fwnode_handle(), as it is
more adequate, wherever possible in thermal drivers (Jiri Slaby)
- Implement and document One-Time Programmable fuse support in the
Rockchip thermal driver in order to increase the precision of the
measurements (Nicolas Frattaroli)
- Change the way the Mediatek LTVS thermal driver stores the
initialization data sequence to support different sequences
matching different platforms. Introduce mt7988 support with a new
initialization sequence (Mason Chang)
- Document the QCom TSens Milos Temperature Sensor DT bindings (Luca
Weiss)
- Add the fallback compatible string for MT7981 and MT8516 DT
bindings (Aleksander Jan Bajkowski)
- Add the compatible string for the Tegra210B01 SOC_THERM driver
(Aaron Kling)"
* tag 'thermal-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
dt-bindings: thermal: tegra: Document Tegra210B01
dt-bindings: thermal: mediatek: Add fallback compatible string for MT7981 and MT8516
dt-bindings: thermal: qcom-tsens: document the Milos Temperature Sensor
thermal/drivers/mediatek/lvts_thermal: Add mt7988 lvts commands
thermal/drivers/mediatek/lvts_thermal: Add lvts commands and their sizes to driver data
thermal/drivers/mediatek/lvts_thermal: Change lvts commands array to static const
thermal/drivers/rockchip: Support reading trim values from OTP
dt-bindings: thermal: rockchip: document otp thermal trim
thermal/drivers/rockchip: Support RK3576 SoC in the thermal driver
dt-bindings: rockchip-thermal: Add RK3576 compatible
thermal/drivers/rockchip: Rename rk_tsadcv3_tshut_mode
thermal: Use dev_fwnode()
thermal: Constify struct thermal_zone_device_ops
thermal/drivers/loongson2: Constify struct thermal_zone_device_ops
thermal/drivers/qcom-spmi-temp-alarm: Add support for LITE PMIC peripherals
thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 2 PMIC peripherals
thermal/drivers/qcom-spmi-temp-alarm: Prepare to support additional Temp Alarm subtypes
thermal/drivers/qcom-spmi-temp-alarm: Add temp alarm data struct based on HW subtype
thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
thermal: sysfs: Return ENODATA instead of EAGAIN for reads
...
'struct thermal_zone_device_ops' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
28116 5168 128 33412 8284 drivers/thermal/armada_thermal.o
After:
=====
text data bss dec hex filename
28244 5040 128 33412 8284 drivers/thermal/armada_thermal.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # For Armada
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/5bba3bf0139e2418b306a0f9a2f1f81ef49e88a6.1748165978.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add debugfs interface to override hardware provide temperature. This
interface can be used primarily for debug. Alternatively this can
be also used to use hardware control loops to manage temperature for
virtual sensors. Virtual sensors are soft sensors created by kernel/
user space aggregating other sensors.
There are three attributes to override the maximum three instances of
platform temperature control.
/sys/kernel/debug/platform_temperature_control/
├── temperature_0
├── temperature_1
└── temperature_2
These are write only attributes requires admin privilege. Any value
greater than 0, will override the temperature. A value of 0 will
stop overriding the temperature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250613214923.2910397-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Firmware-based thermal temperature control loops may aggressively
throttle performance to prevent temperature overshoots relative to the
defined target temperature. This can negatively impact performance. User
space may prefer to prioritize performance, even if it results in
temperature overshoots with in acceptable range.
For example, user space might tolerate temperature overshoots when the
device is placed on a desk, as opposed to when it's on a lap. To
accommodate such scenarios, an optional attribute is provided to specify
a tolerance level for temperature overshoots while maintaining acceptable
performance.
Attribute:
thermal_tolerance: This attribute ranges from 0 to 7, where 0 represents
the most aggressive control to avoid any temperature overshoots, and 7
represents a more graceful approach, favoring performance even at the
expense of temperature overshoots.
Note: This level may not scale linearly. For example, a value of 3 does not
necessarily imply a 50% improvement in performance compared to a value of 0.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250613214923.2910397-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add Platform Temperature Control (PTC) support to the Intel int340x
thermal driver (Srinivas Pandruvada).
- Make the Hisilicon thermal driver compile by default when ARCH_HISI
is set (Krzysztof Kozlowski).
- Clean up printk() format by using %pC instead of %pCn in the bcm2835
thermal driver (Luca Ceresoli).
- Fix variable name coding style in the AmLogic thermal driver (Enrique
Isidoro Vazquez Ramos).
- Fix missing debugfs entry removal on failure by using the devm_
variant in the LVTS thermal driver (AngeloGioacchino Del Regno).
- Remove the unused lvts_debugfs_exit() function as the devm_ variant
introduced before takes care of removing the debugfs entry in the
LVTS driver (Arnd Bergmann).
- Add the Airoha EN7581 thermal sensor support along with its DT
bindings (Christian Marangi).
- Add ipq5018 compatible string DT binding, cleanup and add its suppot
to the QCom Tsens thermal driver (Sricharan Ramabadhran, George
Moussalem).
- Fix comments typos in the Airoha driver (Christian Marangi, Colin Ian
King).
- Address a sparse warning by making a local variable static in the
QCom thermal driver (George Moussalem).
- Fix the usage of the _SCP control method in the driver for ACPI
thermal zones (Armin Wolf).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmg0jdQSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1uPkH/2hZsBDB0sKr9nLN+V1tprdhflZxSRIB
qD65DxWXJ6pumXctaO6WYD1Vf8drO0X3kOcdpHrb+R4Im8qBz290FoUPi3FzUmNM
Qq6erheB/h4FP6EFKJmf5vWCn23nLAT0YtVS6yP9+4DKrqAoGAIlVjxcKc6+tcf/
ZBPWNUNuis+Xk6FD300X2gE1OIh5ZfIvKSh/RnExIqAqRYV8rtGCUdsqid4Rn+Jb
4mzDVnXW5TiJpfoRf5/0gxMYtcTcOIxbtAPAOnXw+4aJZtNK/oN5AqLbf9TNz1vM
ZSHBR0kPDxIa0ppT8SfvzPL5gE6lrxx05WDOvr7PEWHG1GzSFIPkMNc=
=Un/6
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for a new feature, Platform Temperature Control
(PTC), to the Intel int340x thermal driver, add support for the Airoha
EN7581 thermal sensor and the IPQ5018 platform, fix up the ACPI
thermal zones handling, fix other assorted issues and clean up code
Specifics:
- Add Platform Temperature Control (PTC) support to the Intel int340x
thermal driver (Srinivas Pandruvada)
- Make the Hisilicon thermal driver compile by default when ARCH_HISI
is set (Krzysztof Kozlowski)
- Clean up printk() format by using %pC instead of %pCn in the
bcm2835 thermal driver (Luca Ceresoli)
- Fix variable name coding style in the AmLogic thermal driver
(Enrique Isidoro Vazquez Ramos)
- Fix missing debugfs entry removal on failure by using the devm_
variant in the LVTS thermal driver (AngeloGioacchino Del Regno)
- Remove the unused lvts_debugfs_exit() function as the devm_ variant
introduced before takes care of removing the debugfs entry in the
LVTS driver (Arnd Bergmann)
- Add the Airoha EN7581 thermal sensor support along with its DT
bindings (Christian Marangi)
- Add ipq5018 compatible string DT binding, cleanup and add its
suppot to the QCom Tsens thermal driver (Sricharan Ramabadhran,
George Moussalem)
- Fix comments typos in the Airoha driver (Christian Marangi, Colin
Ian King)
- Address a sparse warning by making a local variable static in the
QCom thermal driver (George Moussalem)
- Fix the usage of the _SCP control method in the driver for ACPI
thermal zones (Armin Wolf)"
* tag 'thermal-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: qcom: ipq5018: make ops_ipq5018 struct static
thermal/drivers/airoha: Fix spelling mistake "calibrarion" -> "calibration"
ACPI: thermal: Execute _SCP before reading trip points
ACPI: OSI: Stop advertising support for "3.0 _SCP Extensions"
thermal/drivers/airoha: Fix spelling mistake
thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens
thermal/drivers/qcom/tsens: Add support for tsens v1 without RPM
thermal/drivers/qcom/tsens: Update conditions to strictly evaluate for IP v2+
dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
thermal/drivers: Add support for Airoha EN7581 thermal sensor
dt-bindings: thermal: Add support for Airoha EN7581 thermal sensor
thermal/drivers/mediatek/lvts: Remove unused lvts_debugfs_exit
thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure
thermal/drivers/amlogic: Rename Uptat to uptat to follow kernel coding style
vsprintf: remove redundant and unused %pCn format specifier
thermal/drivers/bcm2835: Use %pC instead of %pCn
thermal/drivers/hisi: Do not enable by default during compile testing
thermal: int340x: processor_thermal: Platform temperature control documentation
thermal: intel: int340x: Enable platform temperature control
thermal: intel: int340x: Add platform temperature control interface
Platform Temperature Control is a dynamic control loop implemented in
hardware to manage the skin or any board temperature of a device. The
reported skin or board temperature is controlled by comparing to a
configured target temperature and adjusting the SoC (System on Chip)
performance accordingly. The feature supports up to three platform
sensors.
OEMs (Original Equipment Manufacturers) can configure this feature
through the BIOS and provide temperature input directly to the hardware
via the Platform Environment Control Interface (PECI). As a result,
this feature can operate independently of any OS-level control.
The OS interface can be used to further fine-tune the default OEM
configuration. Here are some scenarios where the OS interface is
beneficial:
Verification of Firmware Control: Check if firmware-based control is
enabled. If it is, thermal controls from the OS/user space can be
backed out.
Adjusting Target Limits: While OEMs can set an aggressive target limit,
the OS can adjust this to a less aggressive limit based on operating
modes or conditions.
Given that this is platform temperature control, it is expected that a
single user-level manager owns and manages the controls. If multiple
user-level software applications attempt to write different targets, it
can lead to unexpected behavior. For instance, on a Linux desktop, the
Linux thermal daemon can manage these temperature controls, as it has
access to all other temperature control settings.
The hardware control interface is via MMIO offsets in the processor
thermal device MMIO space. There are three instances of MMIO registers.
Refer to the platform_temperature_control.c for MMIO details.
Expose "enable" and "temperature_target" via sysfs.
There are three instances of this controls. So up to three different
sensors can be controlled independently.
Sysfs interface:
tree /sys/bus/pci/devices/0000\:00\:04.0/ptc_?_control/
/sys/bus/pci/devices/0000:00:04.0/ptc_0_control/
├── enable
└── temperature_target
/sys/bus/pci/devices/0000:00:04.0/ptc_1_control/
├── enable
└── temperature_target
/sys/bus/pci/devices/0000:00:04.0/ptc_2_control/
├── enable
└── temperature_target
Description of attributes:
Enable: 1 for enable, 0 for disable. This attribute can be used to
read the current status. User space can write 0 or 1 to disable or
enable this feature respectively.
temperature_target: Target temperature limit to which hardware
will try to limit in milli degree C.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250429000110.236243-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
Panther Lake uses the same DLVR register offsets as Lunar Lake, but the
driver uses the default register offsets table for it by mistake.
Move the selection of register offsets table from the actual attribute
read/write callbacks to proc_thermal_rfim_add() and make it handle
Panther Lake the same way as Lunar Lake. This way it is clean and in
the future such issues can be avoided.
Fixes: e50eeababa ("thermal: intel: int340x: Panther Lake DLVR support")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250411115438.594114-1-srinivas.pandruvada@linux.intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
DVFS (Dynamic Voltage Frequency Scaling) is still supported for DDR
memory on Lunar Lake and Panther Lake.
Add the missing flag PROC_THERMAL_FEATURE_DVFS.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250410172943.577913-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge thermal core updates and miscellaneous updates of the thermal
control subsystem for 6.15-rc1:
- Delay exposing thermal zone sysfs interface to prevent user space
from accessing thermal zones that have not been completely
initialized yet (Lucas De Marchi).
- Fix a spelling mistake in a comment in the thermal core (Colin Ian
King).
- Use kcalloc() instead of kzalloc() in some places in the thermal
control subsystem (Lukasz Luba, Ethan Carter Edwards).
- Clean up variable initialization in int340x_thermal_zone_add()
(Christophe JAILLET).
* thermal-core:
thermal: core: Delay exposing sysfs interface
thermal: core: Fix spelling mistake "Occurences" -> "Occurrences"
* thermal-misc:
thermal: intel: Clean up zone_trips[] initialization in int340x_thermal_zone_add()
thermal: hisi: Use kcalloc() instead of kzalloc() with multiplication
thermal: int340x: Use kcalloc() instead of kzalloc() with multiplication
thermal: k3_j72xx_bandgap: Use kcalloc() instead of kzalloc()
thermal/of: Use kcalloc() instead of kzalloc() with multiplication
thermal/debugfs: replace kzalloc() with kcalloc() in thermal_debug_tz_add()
