Add SoC identification for the RZ/G3L SoC using the System Controller
(SYSC) block.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260203103031.247435-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP, Qualcomm
and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among
a number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of
the new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the
syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs.
-----BEGIN PGP SIGNATURE-----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=rUYH
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
- Add support for the Renesas RZ/V2N SoC
- Add a new driver for the Renesas RZ/[TN]2H SoCs
- Preserve the register state of the RISCV APLIC interrupt controller accross
suspend/resume
- Reinitialize the RISCV IMSIC registers after suspend/resume
- Make the various Loongson interrupt chip drivers 32/64-bit aware
- Handle the number of hardware interrupts in the SIFIVE PLIC driver
correctly.
The hardware interrupt 0 is reserved which resulted in inconsistent
accounting. That went unnoticed as the off by one is only noticable when
the number of device interrupts is a multiple of 32.
- The usual device tree updates, cleanups and improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=ZMMl
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner:
- Add support for the Renesas RZ/V2N SoC
- Add a new driver for the Renesas RZ/[TN]2H SoCs
- Preserve the register state of the RISCV APLIC interrupt controller
accross suspend/resume
- Reinitialize the RISCV IMSIC registers after suspend/resume
- Make the various Loongson interrupt chip drivers 32/64-bit aware
- Handle the number of hardware interrupts in the SIFIVE PLIC driver
correctly
The hardware interrupt 0 is reserved which resulted in inconsistent
accounting. That went unnoticed as the off by one is only noticable
when the number of device interrupts is a multiple of 32
- The usual device tree updates, cleanups and improvements all over the
place
* tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside"
dt-bindings: interrupt-controller: sifive,plic: Clarify the riscv,ndev meaning in PLIC
irqchip/sifive-plic: Handle number of hardware interrupts correctly
irqchip/aspeed-scu-ic: Remove unused variable mask
irqchip/ti-sci-intr: Allow parsing interrupt-types per-line
dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types
irqchip/renesas-rzv2h: Add suspend/resume support
irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result
irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT
irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT
irqchip/riscv-aplic: Preserve APLIC states across suspend/resume
irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit
arm64: dts: renesas: r9a09g087: Add ICU support
arm64: dts: renesas: r9a09g077: Add ICU support
irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver
...
The Kconfig menu entry was converted to a menuconfig to allow it to be
hidden for !CONFIG_RISCV. The drivers under this new option were selected
by some other Kconfig symbols and so an extra select CACHEMAINT_FOR_DMA is
needed.
Fixes: 4d1608d0ab ("cache: Make top level Kconfig menu a boolean dependent on RISCV")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512100411.WxJU2No9-lkp@intel.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251210160047.201379-3-Jonathan.Cameron@huawei.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
On the Renesas RZ/N1 SoC, GPIOs can generate interruptions. Those
interruption lines are multiplexed by the GPIO Interrupt Multiplexer in
order to map 32 * 3 GPIO interrupt lines to 8 GIC interrupt lines.
The GPIO interrupt multiplexer IP does nothing but select 8 GPIO
IRQ lines out of the 96 available to wire them to the GIC input lines.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260114093938.1089936-8-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/N2H (R9A09G087) SoC has the same Interrupt Controller
(ICU) as the Renesas RZ/T2H (R9A09G077) SoC.
Enable support for it by selecting the RENESAS_RZT2H_ICU config.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251216123421.124401-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/T2H (R9A09G077) and Renesas RZ/N2H (R9A09G087) SoCs have an
Interrupt Controller (ICU) that supports interrupts from external pins IRQ0
to IRQ15, and SEI, and software-triggered interrupts INTCPU0 to INTCPU15.
INTCPU0 to INTCPU13, IRQ0 to IRQ13 are non-safety interrupts, while
INTCPU14, INTCPU15, IRQ14, IRQ15 and SEI are safety interrupts, and are
exposed via a separate register space.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251201112933.488801-3-cosmin-gabriel.tanislav.xa@renesas.com
The RZ/G3E system controller has various registers that control or report
some properties specific to individual IPs. The regmap is registered as a
syscon device to allow these IP drivers to access the registers through the
regmap API.
As other RZ SoCs might have custom read/write callbacks or max-offsets,
register a custom regmap configuration.
[claudiu.beznea:
- do not check the match->data validity in rz_sysc_probe() as it is
always valid
- dinamically allocate regmap_cfg]
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250818162859.9661-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Renesas Kconfig is using "SoC serial number" for CONFIG symbol, but is
using "SoC chip name" for menu description. Because of it, it looks
random order when we run "make menuconfig".
commit 6d5aded8d5 ("soc: renesas: Sort driver description title")
sorted Renesas Kconfig by menu description title order, but it makes
confusable to add new config.
Let's unify "ARMxx Platform support for ${CHIP_NUMBER} (${CHIP_NAME}),
and sort it again.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/877c0xhk3z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a new Kconfig option, ARCH_R9A09G087, to enable ARM64 platform
support for the Renesas RZ/N2H SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250609203656.333138-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a new Kconfig option, ARCH_R9A09G056, to enable ARM64 platform support
for the Renesas RZ/V2N SoC. Default this option to "y" when ARCH_RENESAS is
enabled, ensuring that support for the RZ/V2N SoC is automatically included.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable various Renesas SoCs by default when ARCH_RENESAS is selected.
Adding default y if ARCH_RENESAS to the relevant configurations removes
the need to manually enable individual SoCs in defconfig files.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250401090133.68146-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As per the other SoC variant of the same family, the system controller
provides SoC ID in its own registers.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-5-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add SoC detection support for the RZ/G3E SoC. Also add support for
detecting the number of cores and the ETHOS-U55 NPU, and also detect PLL
mismatch for SW settings other than 1.7GHz.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-4-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Now that we have SoC detection in the RZ SYSC driver, move the RZ/G3S
SoC detection to it. The SYSC provides SoC ID in its own registers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Link: https://lore.kernel.org/20250128031342.52675-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RZ/G3S system controller (SYSC) has various registers that control
different functionalities. One of the exposed register offers
information about the SoC identification.
Add a driver that identifies the SoC. Later the driver will be extended
with other functionalities.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add driver for the Renesas RZ/V2H(P) Interrupt Control Unit (ICU).
This driver supports the external interrupts NMI, IRQn, and TINTn.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241009230817.798582-3-fabrizio.castro.jz@renesas.com
All Renesas R-Car Gen2 SoCs have Timer Units (TMU). Enable support for
them by selecting the SYS_SUPPORTS_SH_TMU gatekeeper config symbol.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/b7b9fdd6f517a8b29bf5754e7f083d3b71805130.1710865761.git.geert+renesas@glider.be
Currently, all Kconfig symbols for R-Car Gen4 SoCs select the
ARCH_RCAR_GEN3 SoC family symbol, which might confuse the casual reader.
Fix this by introducing a new SoC family symbol for R-Car Gen4 SoCs.
For now this just selects ARCH_RCAR_GEN3, to avoid duplication, and to
relax dependencies.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/a283913ba7a39ec2dae0ebf9fc2b06096f009511.1706194617.git.geert+renesas@glider.be
Randy reported yet another build issue with randconfigs on rv32:
WARNING: unmet direct dependencies detected for DMA_GLOBAL_POOL
Depends on [n]: !ARCH_HAS_DMA_SET_UNCACHED [=n] && !DMA_DIRECT_REMAP [=y]
Selected by [y]:
- ARCH_R9A07G043 [=y] && SOC_RENESAS [=y] && RISCV [=y] && NONPORTABLE [=y] && RISCV_ALTERNATIVE [=y] && !RISCV_ISA_ZICBOM [=n] && RISCV_SBI [=y]
This happens when DMA_DIRECT_REMAP is selected by the T-Head CMO erratum
option and DMA_GLOBAL_POOL is selected by the Andes CMO erratum. Block
selecting the RZ/Five config option, and by extension DMA_GLOBAL_POOL,
if DMA_DIRECT_REMAP has already been enabled.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/24942b4d-d16a-463f-b39a-f9dfcb89d742@infradead.org/
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231211-primate-arbitrate-fbcd307a0b00@spud
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware drivers.
- Arm FF-A firmware support gains support for v1.1 specification features,
in particular notification and memory transaction descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic,
atmel, tegra, aspeed, vexpress, mediatek, samsung and more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper.
-----BEGIN PGP SIGNATURE-----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=QIut
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
- Drop use of genpd's redundant ->opp_to_performance_state() callback
- amlogic: Add support for the T7 power-domains controller
- amlogic: Fix mask for the second NNA mem power-domain
- bcm: Fixup ASB register read and comparison for bcm2835-power
- imx: Fix device link problem for consumers of the pgc power-domain
- mediatek: Add support for the MT8365 power domains
- qcom: Add support for the rpmhpds for SC8380XP power-domains
- qcom: Add support for the rpmhpds for SM8650 power-domains
- qcom: Add support for the rpmhpd clocks for SM7150
- qcom: Add support for the rpmpds for MSM8917 (families) power-domains
- starfive: Add support for the JH7110 AON PMU
-----BEGIN PGP SIGNATURE-----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=+iJn
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
- Move Kconfig files into the pmdomain subsystem
- Drop use of genpd's redundant ->opp_to_performance_state() callback
- amlogic:
- Add support for the T7 power-domains controller
- Fix mask for the second NNA mem power-domain
- bcm: Fixup ASB register read and comparison for bcm2835-power
- imx: Fix device link problem for consumers of the pgc power-domain
- mediatek: Add support for the MT8365 power domains
- qcom:
- Add support for the rpmhpds for SC8380XP power-domains
- Add support for the rpmhpds for SM8650 power-domains
- Add support for the rpmhpd clocks for SM7150
- Add support for the rpmpds for MSM8917 (families) power-domains
- starfive: Add support for the JH7110 AON PMU
* tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (56 commits)
pmdomain: amlogic: Fix mask for the second NNA mem PD domain
pmdomain: qcom: rpmhpd: Add SC8380XP power domains
pmdomain: qcom: rpmhpd: Add SM8650 RPMh Power Domains
dt-bindings: power: rpmpd: Add SC8380XP support
dt-bindings: power: qcom,rpmhpd: Add GMXC PD index
dt-bindings: power: qcom,rpmpd: document the SM8650 RPMh Power Domains
pmdomain: imx: Make imx pgc power domain also set the fwnode
pmdomain: qcom: rpmpd: Add QM215 power domains
pmdomain: qcom: rpmpd: Add MSM8917 power domains
dt-bindings: power: rpmpd: Add MSM8917, MSM8937 and QM215
pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable
pmdomain: qcom: rpmhpd: Drop the ->opp_to_performance_state() callback
pmdomain: qcom: rpmpd: Drop the ->opp_to_performance_state() callback
pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback
pmdomain: Use device_get_match_data()
pmdomain: ti: add missing of_node_put
pmdomain: mediatek: Add support for MT8365
pmdomain: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap
pmdomain: mediatek: Add support for WAY_EN operations
pmdomain: mediatek: Unify configuration for infracfg and smi
...
ARCH_R9A07G043 has its own non-standard global pool based DMA coherent
allocator, which conflicts with the remap based RISCV_ISA_ZICBOM version.
Add a proper dependency.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231018052654.50074-4-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Randy reported a randconfig build issue against linux-next:
WARNING: unmet direct dependencies detected for ERRATA_ANDES
Depends on [n]: RISCV_ALTERNATIVE [=n] && RISCV_SBI [=y]
Selected by [y]:
- ARCH_R9A07G043 [=y] && SOC_RENESAS [=y] && RISCV [=y] && NONPORTABLE [=y] && RISCV_SBI [=y]
../arch/riscv/errata/andes/errata.c:59:54: warning: 'struct alt_entry' declared inside parameter list will not be visible outside of this definition or declaration
59 | void __init_or_module andes_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
On RISC-V, alternatives are not usable in XIP kernels, which this
randconfig happened to select. Rather than add a check for whether
alternatives are available before selecting the ERRATA_ANDES config
option, rework the R9A07G043 Kconfig entry to depend on the
configuration options required to support its non-standard cache
coherency implementation.
Without these options enabled, the SoC is effectively non-functional to
begin with, so there's an extra benefit in preventing the creation of
non-functional kernels.
The "if RISCV_DMA_NONCOHERENT" can be dropped, as ERRATA_ANDES_CMO will
select it.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/09a6b0f0-76a1-45e3-ab52-329c47393d1d@infradead.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231012-pouch-parkway-7d26c04b3300@spud
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Drew found "CONFIG_DMA_GLOBAL_POOL=y causes ADMA buffer alloc to fail"
the log looks like:
mmc0: Unable to allocate ADMA buffers - falling back to standard DMA
The logic is: generic riscv defconfig selects ARCH_RENESAS then
ARCH_R9A07G043 which selects DMA_GLOBAL_POOL, which assumes all
non-dma-coherent riscv platforms have a dma global pool, this assumption
seems not correct. And I believe DMA_GLOBAL_POOL should not be
selected by ARCH_SOCFAMILIY, instead, only ARCH under some specific
conditions can select it globaly, for example NOMMU ARM and so on,
because it's designed for special cases such as "nommu cases where
non-cacheable memory lives in a fixed place in the physical address
map" as pointed out by Robin.
Fix the issue by making ARCH_R9A07G043 (riscv version) depend on
NONPORTABLE, thus generic defconfig won't select ARCH_R9A07G043 by
default. And even for random config case, there will be less debug
effort once we see NONPORTABLE is enabled.
Reported-by: Drew Fustini <dfustini@baylibre.com>
Closes: https://lore.kernel.org/linux-riscv/ZRuamJuShOnvP1pr@x1/
Fixes: 484861e09f ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20231004150856.2540-1-jszhang@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: <linux-renesas-soc@vger.kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There should not be a blank line before the "help" keyword in the
ARCH_R9A07G043 configuration section.
Fixes: c6a906cce6 ("soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/2a3a9d595579b7cea416c12bf9abcfa2227243bb.1694768174.git.geert+renesas@glider.be
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Remove the architecture which describes H3 ES1.*.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230307105645.5285-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
GPIOLIB and PINCTRL config options are required by all ARM32/ARM64/RISC-V
Renesas SoCs, so instead of selecting them under ARCH_RENESAS for each
architecture just explicitly select them under SOC_RENESAS config option
which will be visible for all the three architectures (if ARCH_RENESAS is
enabled).
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220919104606.96553-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Select RENESAS_RZG2L_IRQC config option if ARCH_RZG2L is enabled
so that IRQC driver is enabled on RZ/G2L (and alike) SoC's.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220718192824.7246-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
PM and PM_GENERIC_DOMAINS configs are required for RZ/N1 SOCs.
Without these configs, the clocks used by the PCI bridge are not
enabled and so accessing the devices leads to a kernel crash:
Unhandled fault: external abort on non-linefetch (0x1008) at 0x90b5f848
Select PM and PM_GENERIC_DOMAINS for ARCH_RZN1
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220422120850.769480-5-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/G2L, RZ/G2LC, RZ/G2UL and RZ/V2L SoCs have identical IP
blocks for which drivers are common. To avoid updating the Kconfig
files for drivers in common to each SoC, introduce the ARCH_RZG2L config
option.
The ARCH_RZG2L config option will be selected by the above mentioned
SoCs, and the ARCH_RZG2L config option will be used as a dependency for
the drivers in common.
While at it, move PM and PM_GENERIC_DOMAINS under the ARCH_RZG2L config
option instead of keeping it for individual SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220224092114.25737-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Explicitly select PM and PM_GENERIC_DOMAINS configs for ARCH_R9A07G044
and ARCH_R9A07G054 configs. PM and PM_GENERIC_DOMAINS configs are
required for RZ/{G2L,V2L} SoC without these configs the SMARC EVK's
won't boot.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220221222450.5393-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
