Move requesting of IRQs in TI Keystone driver to probe time instead of
remoteproc start, to allow better handling of errors.
Introduce support for more than 10 entries in the Qualcomm minidump
implementation.
Add audio DSP remoteproc support for the Qualcomm Eliza platform. Add
modem remoteproc support for the Qualcomm MDM9607, MSM8917, MSM8937, and
MSM8940 platforms.
Add list of Qualcomm QMI service ids to the QMI header file, in order to
avoid sprinkling them across the various drivers using them. Migrate
sysmon to use this constant.
Fix several issues related to DeviceTree parsing and mailbox handling in
the Xilinx R5F remote processor driver.
Fix incorrect error checks in reserved memory handling and polish the
code across i.MX and TI drivers.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCgAsFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmnikW0OHGJqb3JuQGty
eW8uc2UACgkQCx85Pw2ZrcUa8BAAtFLoFqIOUTWLnQJkmIHB1BXlQiwDQZrA3YHU
ouoOhxJK44qInXdXfkKykJsvpO5czytG0JirpKp9XuOTOQ/D61/MzASrgp+DFrWC
dDEiCSD418n7XcZYhU/885lkgNsFwWee4KKqxv4rSIszzEjdpkCv+uuTRFFRRRUy
8GzjyEMZ5CphpC21C1S0Snbs+C8ZnNIrAeVgQmfE1BOS2PbtSP3gfEf2mxhAJiY8
H8emmY41tnmvMfW8w4H+25Q3K41UV2E6v4FwY/Cyn8RGm1wpGRGi6g6woVGuRgxi
51RafOzk7rvd41p0KwJDubjFYl2NtrZN/dA5aukbqa8oRyciACHKeuM7BfWPUAhB
ZUGB9hrnh5sFWSuFjMTqd2hQQYl6uOE9u/pZ7FmCn5Gqg6cGHKWnVD4sxE9QEVDt
ASQnBkCzedo0T/8vCVBGIKh433jXBXF+jJvifrGZQrSfbSXFHybQCMqMlyj/wjdz
+e3BHd/cmZzfCJK6QbQnisVm+VpKggCRh9d/5/RjqfVwUbHphXT6sqQsO7XuddMG
5AfJvrijrgxn9uHlEgaHLEYNox3uV1es7G7cnWoftdhFC1/8bdrnxlG/dHiSI/c6
ZcxRxuWMS1HjOKahe0xQVtrUzs2eWpde59CZQ5hTNpyuf4r7dIwxt13w7zw6pkNh
frMxDtg=
=Jqmf
-----END PGP SIGNATURE-----
Merge tag 'rproc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Move requesting of IRQs in TI Keystone driver to probe time instead
of remoteproc start, to allow better handling of errors.
- Introduce support for more than 10 entries in the Qualcomm minidump
implementation.
- Add audio DSP remoteproc support for the Qualcomm Eliza platform. Add
modem remoteproc support for the Qualcomm MDM9607, MSM8917, MSM8937,
and MSM8940 platforms.
- Add list of Qualcomm QMI service ids to the QMI header file, in order
to avoid sprinkling them across the various drivers using them.
Migrate sysmon to use this constant.
- Fix several issues related to DeviceTree parsing and mailbox handling
in the Xilinx R5F remote processor driver.
- Fix incorrect error checks in reserved memory handling and polish the
code across i.MX and TI drivers.
* tag 'rproc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (35 commits)
remoteproc: qcom: pas: Add Eliza ADSP support
dt-bindings: remoteproc: qcom,milos-pas: Document Eliza ADSP
remoteproc: qcom: Add missing space before closing bracket
dt-bindings: remoteproc: qcom: Drop types for firmware-name
remoteproc: qcom: Fix minidump out-of-bounds access on subsystems array
dt-bindings: remoteproc: k3-r5f: Add memory-region-names
dt-bindings: remoteproc: k3-r5f: Split up memory regions
remoteproc: use SIZE_MAX in rproc_u64_fit_in_size_t()
dt-bindings: remoteproc: qcom,sm8550-pas: Add Glymur CDSP
dt-bindings: remoteproc: qcom,sm8550-pas: Add Glymur ADSP
remoteproc: xlnx: Release mailbox channels on shutdown
remoteproc: sysmon: Use the unified QMI service ID instead of defining it locally
remoteproc: xlnx: Only access buffer information if IPI is buffered
remoteproc: xlnx: Avoid mailbox setup
remoteproc: keystone: Request IRQs in probe()
remoteproc: pru: Remove empty remove callback
remoteproc: pru: Use rproc_of_parse_firmware() to get firmware name
remoteproc: da8xx: Reorder resource fetching in probe()
remoteproc: da8xx: Remove unused local struct data
remoteproc: da8xx: Use dev_err_probe()
...
Instead of defining a local macro with a custom name for the QMI
service identifier, use the one provided in qmi.h and remove the
locally defined macro.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260309230346.3584252-5-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMI message encoder has up until recently read a single byte (as
elem_size == 1), but with the introduction of big endian support it's
become apparent that this field is expected to be a full u32 -
regardless of the size of the length in the encoded message (which is
what elem_size specifies).
The result is that the encoder now reads past the length byte and
rejects the unreasonably large length formed when including the
following 3 bytes from the subsys_name array.
Fix this by changing to the expected type.
Fixes: 1fb82ee806 ("remoteproc: qcom: Introduce sysmon")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Chris Lew <christopher.lew@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260220-qmi-encode-invalid-length-v2-1-5674be35ab29@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The comment says the qcom_add_sysmon_subdev() returns NULL on error but
it actually returns error pointers.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/77a6b65b-5f3f-4a21-a837-7a4a7e09b099@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174935.4063513-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The kfree() should be called when of_irq_get_byname() fails or
devm_request_threaded_irq() fails in qcom_add_sysmon_subdev(),
otherwise there will be a memory leak, so add kfree() to fix it.
Fixes: 027045a6e2 ("remoteproc: qcom: Add shutdown-ack irq")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221129105650.1539187-1-cuigaosheng1@huawei.com
Commit ff6d365898 ("soc: qcom: qmi: use const for struct
qmi_elem_info") allows QMI message encoding/decoding rules to be
const, so do that for sysmon.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220914234705.28405-3-quic_jjohnson@quicinc.com
When a new remoteproc boots up, send the sysmon state notification
of only running remoteprocs. Sending state of remoteprocs booting
up in parallel can cause a race between SSR clients of the remoteproc
that is booting up and the sysmon notification for the same remoteproc,
resulting in an inconsistency between which state the remoteproc that
is booting up in parallel.
For example - if remoteproc A and B crash one after the other, after
remoteproc A boots up, if the remoteproc A tries to get the state of
remoteproc B before the sysmon subdevice for B is invoked but after
the ssr subdevice of B has been invoked, clients on remoteproc A
might get confused when the sysmon notification indicates a different
state.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-8-git-send-email-quic_sibis@quicinc.com
The SSCTL service comes up after a finite time when the remote Q6 comes
out of reset. Any graceful shutdowns requested during this period will
be a NOP and abrupt tearing down of the glink channel might lead to pending
transactions on the remote Q6 side and will ultimately lead to a fatal
error. Fix this by waiting for the SSCTL service when a graceful shutdown
is requested.
Fixes: 1fb82ee806 ("remoteproc: qcom: Introduce sysmon")
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-7-git-send-email-quic_sibis@quicinc.com
The latest version of sysmon_stop() starts by initializing
the sysmon->shutdown_acked variable, but then overwrites it
with an uninitialized variable later:
drivers/remoteproc/qcom_sysmon.c:551:11: error: variable 'acked' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
else if (sysmon->ept)
^~~~~~~~~~~
drivers/remoteproc/qcom_sysmon.c:554:27: note: uninitialized use occurs here
sysmon->shutdown_acked = acked;
^~~~~
Remove the local 'acked' variable again and set the state directly.
Fixes: 5c212aaf54 ("remoteproc: sysmon: Expose the shutdown result")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201204193740.3162065-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Improve the style of a few of the error messages printed by the sysmon
implementation and fix the copy-pasted shutdown error in the send-event
function.
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20201122054135.802935-5-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
A graceful shutdown of the Qualcomm remote processors where
traditionally performed by invoking a shared memory state signal and
waiting for the associated ack.
This was later superseded by the "sysmon" mechanism, where some form of
shared memory bus is used to send a "graceful shutdown request" message
and one of more signals comes back to indicate its success.
But when this newer mechanism is in effect the firmware is shut down by
the time the older mechanism, implemented in the remoteproc drivers,
attempts to perform a graceful shutdown - and as such it will never
receive an ack back.
This patch therefor track the success of the latest shutdown attempt in
sysmon and exposes a new function in the API that the remoteproc driver
can use to query the success and the necessity of invoking the older
mechanism.
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20201122054135.802935-3-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The reliance on the remoteproc's state for determining when to send
sysmon notifications to a remote processor is racy with regard to
concurrent remoteproc operations.
Further more the advertisement of the state of other remote processor to
a newly started remote processor might not only send the wrong state,
but might result in a stream of state changes that are out of order.
Address this by introducing state tracking within the sysmon instances
themselves and extend the locking to ensure that the notifications are
consistent with this state.
Fixes: 1f36ab3f6e ("remoteproc: sysmon: Inform current rproc about all active rprocs")
Fixes: 1877f54f75 ("remoteproc: sysmon: Add notifications for events")
Fixes: 1fb82ee806 ("remoteproc: qcom: Introduce sysmon")
Cc: stable@vger.kernel.org
Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20201122054135.802935-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The only usage of qmi_indication_handler[] is to pass its address to
qmi_handle_init() which accepts a const pointer. Make it const to allow
the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20201122234540.34623-1-rikard.falkeborn@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Looks as though 'name' has now been moved into 'struct sysmod_event'
which is passed in instead. However, the parameter descriptions were
not updated at the same time. Let's do that now.
Fixes the following W=1 kernel build warning(s):
drivers/remoteproc/qcom_sysmon.c:78: warning: Function parameter or member 'event' not described in 'sysmon_send_event'
drivers/remoteproc/qcom_sysmon.c:78: warning: Excess function parameter 'name' description in 'sysmon_send_event'
drivers/remoteproc/qcom_sysmon.c:350: warning: Function parameter or member 'event' not described in 'ssctl_send_event'
drivers/remoteproc/qcom_sysmon.c:350: warning: Excess function parameter 'name' description in 'ssctl_send_event'
Cc: Andy Gross <agross@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200715123551.4011154-2-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Clients/services running on a remoteproc that booted up might need to be
aware of the state of already running remoteprocs. When a remoteproc boots
up (fresh or after recovery) it is not aware of the remoteprocs that booted
before it, i.e., the system state is incomplete. So to keep track of it we
send sysmon on behalf of all 'ONLINE' remoteprocs.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Link: https://lore.kernel.org/r/1586389003-26675-4-git-send-email-sidgup@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add notification for other stages of remoteproc boot and shutdown. This
includes adding callback functions for the prepare and unprepare events,
and fleshing out the callback function for start.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Link: https://lore.kernel.org/r/1586389003-26675-3-git-send-email-sidgup@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Current implementation of the sysmon driver does not support adding
notifications for other remoteproc events - prepare, start, unprepare.
Clients on the remoteproc side might be interested in knowing when a
remoteproc boots up. This change adds the ability to send the notification
type along with the name. For example, audio DSP is interested in knowing
when modem has crashed so that it can perform cleanup and wait for modem to
boot up before it starts processing data again.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Link: https://lore.kernel.org/r/1586389003-26675-2-git-send-email-sidgup@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
After sending a sysmon shutdown request to the SSCTL service on the
subsystem, wait for the service to send shutdown-ack interrupt or
an indication message to signal the completion of graceful shutdown.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add shutdown-ack irq handling required for sysmon shutdown for
Q6V5 MSS on SDM845/MSM8996 and for WCSS Q6V5 on QCS404 SoC.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
[bjorn: Revert back to qcom_add_sysmon_subdev returning a sysmon object]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Remove linux/notifier.h which is included more than once
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In preparation of adding the additional prepare and unprepare operations
make the client responsible for filling out the function pointers of the
rproc_subdev. This makes the arguments to rproc_add_subdev() more
manageable, in particular when some of the functions are left out.
Tested-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[elder@linaro.org: added comment about assigning function pointers]
Signed-off-by Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The sysmon client communicates either via a dedicated SMD/GLINK channel
or via QMI encoded messages over IPCROUTER with remote processors in
order to perform graceful shutdown and inform about other remote
processors shutting down.
Acked-By: Chris Lew <clew@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
