On i.MX8MP the VPU blk-ctrl exposes G1, G2 and VC8000E as three separate
genpds, each serialized only by its own genpd lock, so their power_on and
power_off callbacks can run concurrently on SMP.
The sequences are not independent: they share the VPUMIX bus domain, the
VPU_NOC and the ADB400 handshake. On power up the GPC cannot ack-verify
the ADB400 handshake - the ack only completes once blk-ctrl sets the bus
clk-en bit - so it just waits a fixed delay instead of polling hskack. A
sibling transition landing inside another domain's reset window disturbs
that shared clock and handshake timing, the victim's reset does not take
effect, and its block registers read back all zeros: the decoder times
out or the encoder fails its format check.
Serialize the blk-ctrl reset sequence with a per-blk-ctrl mutex; the
driver deliberately avoids a genpd hierarchy, so the genpd core gives no
cross-sibling serialization.
Fixes: a1a5f15f7f ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
- container_of:
- Apply typeof_member(), remove the local __mptr variable to eliminate
variable shadowing warnings on nested container_of() calls, and remove
unnecessary parentheses.
- core:
- Add driver name to probe debug print for initcall_debug.
- Avoid repeatedly printing the same 'Fixed dependency cycle' log.
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device().
- Remove statistics group if encryption group creation fails in
transport_add_class_device().
- debugfs:
- Fix lockdown check for mmap_prepare().
- Warn if file creation failed due to uninitialized debugfs.
- device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from DEV_PROP_REF
properties to enable automatic probe ordering. Add kunit-managed fwnode
helpers and test coverage.
- Fix infinite loop in fwnode_for_each_child_node() when the secondary fwnode
has more than one child. Add test cases.
- Fix out-of-bounds access in software_node_get_reference_args() when called
with index -1 (UINT_MAX).
- Refactor to use RAII approach with __free().
- Add Bartosz Golaszewski as software node reviewer.
- firmware loader:
- Fix race where a sysfs fallback request can complete before being queued as
pending, leading to a use-after-free on the next fallback request.
- Reject 0-size built-in firmware and fail the build on empty firmware files
in CONFIG_EXTRA_FIRMWARE.
- kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros and
allow the constification of kobject attributes, enabling them to reside in
read-only memory.
- platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(), and
platform_device_set_of_node_from_dev() helpers that encapsulate firmware
node reference counting for dynamically allocated platform devices. Convert
all in-tree users that manually assigned dev.of_node or dev.fwnode, fixing a
pre-existing refcount bug in powermac. Switch to counting references of all
firmware node types, not only OF nodes.
- Unify the release path for dynamically allocated platform devices by
removing platform_device_release_full(). Amend the fwnode setter API
contract to warn if a primary software node is overwritten. Add KUnit tests
for correct software node removal on device unregistration.
- Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant ForLt types.
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements from
kernel::transmute traits to zerocopy traits.
- Device:
- Add BoundInternal device context and InternalBoundContext trait for bus
abstractions that need internal access to a bound device.
- Make the lifetime on Core and CoreInternal invariant to prevent coercion
to shorter lifetimes.
- Devres:
- Fix race between concurrent revokers where the losing revoker could return
before the winning revoker finished dropping the inner data, causing
use-after-free.
- Ensure revocation is complete before the device finishes unbinding by
making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens 'static back
to the caller's borrow scope. Implement ForLt and CovariantForLt for Bar,
IoMem, and ExclusiveIoMem.
- Driver:
- Switch from index-based to pointer-based device ID info lookup, storing
static references in driver_data. Centralize device ID handling in
device_id.rs, removing the open-coded ACPI/OF matching logic and duplicate
ID table from driver.rs.
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type for the
existing untyped case), create view types representing subregions of a
mapped I/O region, and add io_project!() for safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io) with a
blanket implementation, preventing implementers from overriding provided
methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile access, and
make Coherent implement Io via an I/O view type. Add IoSysMap as sum type
of Mmio and SysMem. Add copying methods (memcpy_{from,to}io()) and
read_val()/write_val() for typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!() for
primitives and copying methods for aggregates; drop the old macros.
Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro, remove
unused rule arguments, and use path fragments for alias destinations.
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers by
removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources.
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning type,
giving drivers explicit control over the allocation lifetime.
IrqVector embeds a resolved IrqRequest, making the conversion
infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX, PCI_IRQ_MSI,
or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline.
- Serdev:
- Add Rust abstractions for the serial device bus, including serdev::Driver
trait, serdev::Device wrapping struct serdev_device, and serdev::Adapter
implementing RegistrationOps. Includes a sample driver. Markus Probst
takes over as serdev maintainer for both C and Rust code.
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an unsafe
CovariantForLt subtrait guaranteeing covariance, enabling invariant types
(e.g. those containing Mutex<&'bound T>) to participate in the ForLt
abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef.
- misc:
- Avoid iattr allocation in kernfs listxattr by using kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark internal property
data as private for kernel-doc, and add property.h/fwnode.h to driver-api
infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaoSPugAKCRBFlHeO1qrK
LlBrAP958EaYZVyfAsqq0EyHv86ahXKWoDDvkwbRUZA5CfV9tAD/bMWVtPLRYaaq
eNEZT7p5w3Haezh61H3c5zpuwFNMTA0=
=VRIa
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmp49yoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1WIH/1SD1rNIb4Prf0C7
Rk9Hz0IZ3uYNe1Xi+Ozv3zQUuLB6d7ewl9e4zyHHYT4eeIKvBZv9jtIF3QH4ty5X
JB9Gy62WICtqIEkzzt2bkcV1byFmKz2+BLv04fgcyTXEGOEByCDiZ3/N3kSJOqvg
YxsGOmKkQSTavFLSe96Gj2pgchJqZ6j3qucDO6GrPOo8depP2kfzxfaJbXix0HEZ
ln08X9hgZDxy4I98PmSaaJsK2R/i6T6jQdA3i8DnSbbyNhLn+3FK6gkP08ZEpaor
82WwJf+MVCLHXLYDy0aYOUDHpkNkkJWOj45A2Hv9JkOupGcUpyPGr82l4yh/MrxC
+kM28xs=
=rIbd
-----END PGP SIGNATURE-----
Merge tag 'v7.2-rc7' into driver-core-next
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Convert CONFIG_IMX_SCU_PD from bool to tristate to allow building as a
loadable module. This is needed on Android devices using the Generic
Kernel Image (GKI), where SoC-specific drivers must be built as modules
rather than built into the core kernel image.
For i.MX8Q devices running Android with a GKI kernel, the SCU power
domain driver must be loadable. Without tristate support, power domains
cannot be properly initialized, preventing these systems from
functioning under GKI.
Use subsys_initcall() so that when built-in the power domain provider
probes before its consumers (e.g. the SCU clock driver at
device_initcall level), fixing "failed to attached the power domain"
warnings at boot. When built as a module, subsys_initcall() is
equivalent to module_init(). No module_exit() is provided because the
SCU power domain provider is a system-level resource that cannot be
safely removed at runtime.
Add MODULE_DEVICE_TABLE() for OF-based module autoloading.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Without a module description modpost emits a build warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pmdomain/imx/imx8m-blk-ctrl.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pmdomain/imx/imx8mp-blk-ctrl.o
So add the required string to these two drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Convert IMX8M_BLK_CTRL and IMX9_BLK_CTRL from bool to tristate
to allow building as loadable modules.
This change is required to support Android devices using Generic Kernel
Image (GKI) kernels, where SoC-specific drivers must be built as loadable
modules rather than built into the core kernel image.
For i.MX8M and i.MX9 devices running Android with GKI kernels, the
BLK_CTRL drivers therefore need to be loadable. Without tristate
support, power domains cannot be initialized correctly, making these
systems non-functional under GKI.
Add prompt strings to make these options visible and configurable
in menuconfig, keeping them enabled by default on appropriate platforms.
Also remove the IMX_GPCV2_PM_DOMAINS dependency from IMX9_BLK_CTRL.
This dependency was incorrect from the beginning because i.MX93 uses a
different power domain architecture compared to i.MX8M series:
- i.MX8M uses GPCv2 (General Power Controller v2) for power domain
management, hence IMX8M_BLK_CTRL correctly depends on it.
- i.MX93 uses BLK_CTRL directly without GPCv2. The hardware doesn't
have GPCv2 at all.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Ahead of reworking the reference counting logic for platform devices,
encapsulate the assignment of the OF node for dynamically allocated
platform devices with the provided helper.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-11-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Per errata[1]:
ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
power up/down cycling.
Description: VC8000E reset de-assertion edge and AXI clock may have a
timing issue.
Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
de-asserted by HW)
Add a bool variable is_errata_err050531 in
'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
is needed. If is_errata_err050531 is true, first clear the clk before
powering up gpc, then enable the clk after powering up gpc.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A
Fixes: a1a5f15f7f ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Using imx8mm_vpu_power_notifier() for i.MX8MP is wrong, as it ungates
the VPU clocks to provide the ADB clock, which is necessary on i.MX8MM,
but on i.MX8MP there is a separate gate (bit 3) for the NoC. So add
imx8mp_vpu_power_notifier() for i.MX8MP.
Fixes: a1a5f15f7f ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The MIPI DSI and CSI domains share control bits for clock and reset, which
can lead to incorrect behavior if one domain disables the shared resource
while the other is still active.
To fix the issue, introduce a shared MIPI PHY power domain to own the
common resources and make DSI and CSI its subdomains. This ensures the
shared bits are properly managed and not disabled while still in use.
Fixes: e9aa77d413 ("soc: imx: add i.MX93 media blk ctrl driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
for_each_child_of_node_scoped() decrements the reference count of the
nod after each iteration. Assigning it without incrementing the refcount
to a dynamically allocated platform device will result in a double put
in platform_device_release(). Add the missing call to of_node_get().
Cc: stable@vger.kernel.org
Fixes: 3e4d109ee8 ("pmdomain: imx: gpc: Simplify with scoped for each OF child loop")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Merge the pmdomain fixes for v7.0-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In imx_sc_pd_get_console_rsrc(), it does not release the reference.
Fixes: 893cfb9973 ("firmware: imx: scu-pd: do not power off console domain")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This particular block can have DT subnodes describing the LVDS LDB, MIPI
DSI and parallel DPI bridge.
Scan for possible sub-devices within the driver, instead of misusing the
simple-bus to perform the scan.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the driver to devm_ APIs only by making use of
devm_add_action_or_reset() and devm_pm_runtime_enable() to simplify the
probe error path and to drop the .remove() callback. This also ensures
that the device release order equals the device probe error path order.
Furthermore drop the dev_set_drvdata() usage since the only user was the
.remove() callback which is removed by this commit.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Call dev_err_probe() directly during return to make the code more
compact.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Keep the NOC_HDCP clock always enabled to fix the potential hang
caused by the NoC ADB400 port power down handshake.
Fixes: 77b0ddb42a ("soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Passing pm_runtime_put() return value to the callers is not particularly
useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Accordingly, update imx_pgc_domain_suspend() to simply discard the
return value of pm_runtime_put() and always return success to the
caller.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/15658107.tv2OnDr8pf@rafael.j.wysocki
USB system wakeup need its PHY on, so add the GENPD_FLAG_ACTIVE_WAKEUP
flags to USB PHY genpd configuration.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Fixes: 556f5cf956 ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Current design will power off all dependent GPC power domains in
imx8mp_blk_ctrl_suspend(), even though the user device has enabled
wakeup capability. The result is that wakeup function never works
for such device.
An example will be USB wakeup on i.MX8MP. PHY device '382f0040.usb-phy'
is attached to power domain 'hsioblk-usb-phy2' which is spawned by hsio
block control. A virtual power domain device 'genpd:3:32f10000.blk-ctrl'
is created to build connection with 'hsioblk-usb-phy2' and it depends on
GPC power domain 'usb-otg2'. If device '382f0040.usb-phy' enable wakeup,
only power domain 'hsioblk-usb-phy2' keeps on during system suspend,
power domain 'usb-otg2' is off all the time. So the wakeup event can't
happen.
In order to further establish a connection between the power domains
related to GPC and block control during system suspend, register a genpd
power on/off notifier for the power_dev. This allows us to prevent the GPC
power domain from being powered off, in case the block control power
domain is kept on to serve system wakeup.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 556f5cf956 ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On i.MX8MM, the GPUMIX, GPU2D, and GPU3D blocks share a common reset
domain. Due to this hardware limitation, powering off/on GPU2D or GPU3D
also triggers a reset of the GPUMIX domain, including its ADB400 port.
However, the ADB400 interface must always be placed into power‑down mode
before being reset.
Currently the GPUMIX and GPU2D/3D power domains rely on runtime PM to
handle dependency ordering. In some corner cases, the GPUMIX power off
sequence is skipped, leaving the ADB400 port active when GPU2D/3D reset.
This causes the GPUMIX ADB400 port to be reset while still active,
leading to unpredictable bus behavior and GPU hangs.
To avoid this, refine the power‑domain control logic so that the GPUMIX
ADB400 port is explicitly powered down and powered up as part of the GPU
power domain on/off sequence. This ensures proper ordering and prevents
incorrect ADB400 reset.
Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For i.MX8MQ platform, the ADB in the VPUMIX domain has no separate reset
and clock enable bits, but is ungated and reset together with the VPUs.
So we can't reset G1 or G2 separately, it may led to the system hang.
Remove rst_mask and clk_mask of imx8mq_vpu_blk_ctl_domain_data.
Let imx8mq_vpu_power_notifier() do really vpu reset.
Fixes: 608d7c325e ("soc: imx: imx8m-blk-ctrl: add i.MX8MQ VPU blk-ctrl")
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
of_get_child_by_name() returns a node pointer with refcount incremented.
Use the __free() attribute to manage the pgc_node reference, ensuring
automatic of_node_put() cleanup when pgc_node goes out of scope.
This eliminates the need for explicit error handling paths and avoids
reference count leaks.
Fixes: 721cabf6c6 ("soc: imx: move PGC handling to a new GPC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
of_get_child_by_name() returns a node pointer with refcount incremented, we
should use of_node_put() on it when not needed anymore. Add the missing
of_node_put() to avoid refcount leak.
Fixes: 721cabf6c6 ("soc: imx: move PGC handling to a new GPC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The i.MX91 is derived from i.MX93, but there is no DSI and PXP in i.MX91,
Add skip_mask in struct imx93_blk_ctrl_data, then skip DSI and PXP for
i.MX91 Soc.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250806114119.1948624-11-joy.zou@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Apparently, ISI needs cache settings similar to LCDIF.
Otherwise we get artefacts in the image.
Tested on i.MX8MP.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Link: https://lore.kernel.org/r/m3ldr69lsw.fsf@t19.piap.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Starting with commit c141ecc3ce ("of: Warn when of_property_read_bool()
is used on non-boolean properties"), probing the gpcv2 device on i.MX8M
SoCs leads to warnings when LOCKDEP is enabled.
Fix this by checking property presence with of_property_present as
intended.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250218-gpcv2-of-property-present-v1-1-3bb1a9789654@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v6.13-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.14.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v6.13-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.14.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
imx_gpcv2_probe() leaks an OF node reference obtained by
of_get_child_by_name(). Fix it by declaring the device node with the
__free(device_node) cleanup construct.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 03aa12629f ("soc: imx: Add GPCv2 power gating driver")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Cc: stable@vger.kernel.org
Message-ID: <20241215030159.1526624-1-joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The gpcv2 drivers on imx8m series are registered as platform
devices and this opens the possibility of reloading the driver
at runtime.
But this doesn't actually work. There are some hardware sequence
dependecy between blk ctrl and gpc, also power domains are used
by other peripherals, so fix this by explicitly suppressing bind
attrs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-ID: <20241206112731.98244-2-peng.fan@oss.nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The blk ctrl drivers on imx8m series are registered as platform
devices and this opens the possibility of reloading the driver
at runtime.
But this doesn't actually work. There are some hardware sequence
dependecy between blk ctrl and gpc, also power domains are used
by other peripherals, so fix this by explicitly suppressing bind
attrs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-ID: <20241206112731.98244-1-peng.fan@oss.nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
- Fix a couple of memory-leaks during genpd init/remove
pmdomain providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain layer
-----BEGIN PGP SIGNATURE-----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=fCUR
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix a couple of memory-leaks during genpd init/remove
Providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain
layer"
* tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
pmdomain: core: Add missing put_device()
dt-bindings: power: mediatek: Add another nested power-domain layer
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20241104190742.276710-1-robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v6.12-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.13.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The check condition should be 'i < bc->onecell_data.num_domains', not
'bc->onecell_data.num_domains' which will make the look never finish
and cause kernel panic.
Also disable runtime to address
"imx93-blk-ctrl 4ac10000.system-controller: Unbalanced pm_runtime_enable!"
Fixes: e9aa77d413 ("soc: imx: add i.MX93 media blk ctrl driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable@vger.kernel.org
Message-ID: <20241101101252.1448466-1-peng.fan@oss.nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The patch standardizes the probe() code by replacing the two occurrences
of dev_err() with dev_err_probe(). Indeed, dev_err_probe() was used in all
other error paths of the probe() function.
Note that dev_err_probe() has advantages even if the error code is not
EPROBE_DEFER, such as the symbolic output of the error code. Therefore,
it should generally be preferred over dev_err().
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Message-ID: <20241025160430.4113467-1-dario.binacchi@amarulasolutions.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This variable is only used within the probe() function, so let's remove
it from the context and define it locally within the same function.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240825143428.556439-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The removed code was added to handle the case where the power domain is
already on during the driver's probing. In this use case, the "is_off"
parameter is passed as false to pm_genpd_init() to inform it not to call
the power_on() callback, as it's unnecessary to perform the hardware
power-on procedure since the power domain is already on. Therefore, with
the call to clk_bulk_prepare_enable() by probe(), the system is in the
same operational state as when "is_off" is passed as true after the
power_on() callback execution:
probe() -> is_off == true -> clk_bulk_prepare_enable() called by power_on()
probe() -> is_off == false -> clk_bulk_prepare_enable() called by probe()
Reaching the same logical and operational state, it follows that upon
driver removal, there is no need to perform different actions depending
on the power domain's on/off state during probing.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240825143428.556439-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This way, the code becomes more compact, and dev_err_probe() is used in
every error path of the probe() function.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240825143428.556439-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
With "quiet" set in bootargs, there is power domain failure:
"imx93_power_domain 44462400.power-domain: pd_off timeout: name:
44462400.power-domain, stat: 4"
The current power on opertation takes ISO state as power on finished
flag, but it is wrong. Before powering on operation really finishes,
powering off comes and powering off will never finish because the last
powering on still not finishes, so the following powering off actually
not trigger hardware state machine to run. SSAR is the last step when
powering on a domain, so need to wait SSAR done when powering on.
Since EdgeLock Enclave(ELE) handshake is involved in the flow, enlarge
the waiting time to 10ms for both on and off to avoid timeout.
Cc: stable@vger.kernel.org
Fixes: 0a0f7cc25d ("soc: imx: add i.MX93 SRC power domain driver")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240814124740.2778952-1-peng.fan@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
