Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 hp_accel driver.
Fixes: 8ebcb6c94c ("platform/x86: hp_accel: Convert to be a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2425918.ElGaqSPkdT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-c0xxx (board ID: 8902) has the same WMI interface as
other Victus S boards, but requires additional quirks for correctly
switching thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to the omen_v1_legacy_thermal_params quirk.
Testing on board 8902 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Signed-off-by: Konenko Andrey Viktorovich <admin@aquinas.su>
Link: https://patch.msgid.link/T3DTKbKwQzOgk_0eUG-kMg@aquinas.su
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Victus 16-r0xxx (board ID: 8BC2) has the same WMI as other Victus
S boards, but requires quirks for correctly switching thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8BC2 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Signed-off-by: Haichen Feng <2806891994@qq.com>
Link: https://patch.msgid.link/tencent_8E29805D8DC7B6005244C3433C62DD9DF606@qq.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen Max 16-ah0xxx, DMI board ID 8D41 is currently marked with
victus_s_thermal_params in the victus_s_thermal_profile_boards[] list.
This disables thermal profile readback and adds a dmesg warning during
driver init for "unknown board".
After testing we know that (similar to another HP Omen Max 16 device,
board ID 8D87), the embedded controller on this board does not expose
thermal profile which means we have to intentionally disable EC
readback.
Changing its driver_data to omen_v1_no_ec_thermal_params is sufficient
to silence the warning.
Tested-by: Benjamin Y <hectare.plains1h@icloud.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260429180953.129885-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- asus-wmi:
- Retain battery charge threshold during boot which avoids unsolicited
change to 100%. Return -ENODATA when the limit is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
- barco-p50-gpio: Normalize gpio_get return values
- bitland-mifs-wmi: Add driver for Bitland laptops (supports platform
profile,hwmon, kbd backlight, gpu mode, hotkeys, and
fan boost)
- dell_rbu: Fix using uninitialized value in sysfs write function
- dell-wmi-sysman: Respect destination length when constructing enum
strings
- hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and Omen MAX
16-ak0xxxx
- input: trackpoint & thinkpad_acpi: Enable doubletap by default and
add sysfs enable/disable
- int3472: Add support for GPIO type 0x02 (IR flood LED)
- intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
- intel/vsec: Refactor to support ACPI-enumerated PMT endpoints.
- pcengines-apuv2: Attach software node to the gpiochip
- uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
- wmi: Perform output size check within WMI core to allow simpler WMI
drivers
- acpi_driver -> platform driver conversions (a large number of changes
from Rafael J. Wysocki)
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wmi:
- adjust screenpad power/brightness handling
- do not enforce a battery charge threshold
- fix screenpad brightness range
barco-p50-gpio:
- convert to guard() notation
- normalize return value of gpio_get
bitland-mifs-wmi:
- Add new Bitland MIFS WMI driver
dell/dell-rbtn:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
dell_rbu:
- avoid uninit value usage in packet_size_write()
dell-wmi-sysman:
- bound enumeration string aggregation
- Clean up security buffer helpers
- Fix typo in function comment
- Use standard kobj_sysfs_ops
- Use sysfs_emit{_at} in show functions
Documentation: laptops:
- Update documentation for uniwill laptops
Documentation:
- thinkpad-acpi - Document doubletap_enable attribute
eeepc-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
fujitsu:
- Convert backlight driver to a platform one
- Convert laptop driver to a platform one
- Register ACPI notify handlers directly
- Reorder code to avoid forward declarations
fujitsu-tablet:
- Convert ACPI driver to a platform one
hp-wmi:
- add locking for concurrent hwmon access
- add Omen 14-fb0xxx (board 8C58) support
- Add support for Omen 16-n0xxx (8A44)
- Add support for Omen 16-wf1xxx (8C77)
- Add support for OMEN MAX 16-ak0xxx (8D87)
- avoid cancel_delayed_work_sync from work handler
- fix fan table parsing
- fix ignored return values in fan settings
- fix u8 underflow in gpu_delta calculation
- Ignore backlight and FnLock events
- use mod_delayed_work to reset keep-alive timer
input:
- trackpoint - Enable doubletap by default on capable devices
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
- Parameterize LED con_id in registration
- Rename pled to led in LED registration code
- Use local variable for LED struct access
intel/rst:
- Convert ACPI driver to a platform one
intel/smartconnect:
- Convert ACPI driver to a platform one
intel/tpmi:
- Use 32 bit aligned address for debugfs mem write
intel/vsec:
- Decouple add/link helpers from PCI
- Make driver_data info const
- Plumb ACPI PMT discovery tables through vsec
- Refactor base_addr handling
- Return real error codes from registration path
- Switch exported helpers from pci_dev to device
lg-laptop:
- Convert ACPI driver to a platform one
- Drop debug-only ACPI notify handler
nvsw-sn2201:
- Drop unused include
panasonic-laptop:
- Convert ACPI driver to a platform one
- Fix OPTD notifier registration and cleanup
- Make pcc_register_optd_notifier() void
- Register ACPI notify handler directly
- Remove redundant checks from 3 functions
pcengines-apuv2:
- attach software node to the gpiochip
sony-laptop:
- Convert NC driver to a platform one
- Convert PIC driver to a platform one
- Register ACPI notify handler directly
surface: hotplug:
- Correct inclusion for GPIO APIs
surface: surfacepro3_button:
- Convert to a platform driver
- Drop wakeup source on remove
- Register ACPI notify handler
system76:
- Convert ACPI driver to a platform one
- Drop redundant devm_led_classdev_unregister()
- Register ACPI notify handler directly
thinkpad_acpi:
- Add sysfs control for TrackPoint double-tap
- Drop ACPI driver registration
- remove obsolete TODO comment
- use seq_puts() instead of seq_printf()
tools/power/x86/intel-speed-select:
- Avoid current base freq as maximum
- Fix cpu extended family ID decoding
- Fix output when running on unsupported CLX platforms
- Fix some program return value
- Print Version info when Incompatible API version is detected
- v1.26 release
topstar-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_acpi:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
- Reorder code to avoid forward declaration
toshiba_bluetooth:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_haps:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
uniwill-laptop:
- Apply features across all TUXEDO devices
- Fix signedness bug
- Fix XMG Fusion 15 (L19) entries
- Implement USB-C power priority setting
- Rework hwmon feature defines
wireless-hotkey:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
wmi:
- Add wmidev_invoke_procedure()
- Convert drivers to use wmidev_invoke_procedure()
- Extend wmidev_invoke_method() to reject undersized data
- Extend wmidev_query_block() to reject undersized data
- Prepare to reject undersized unmarshalling results
- Replace .no_notify_data with .min_event_size
x86:
- remove unnecessary module_init/exit() functions
Merges:
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge tag 'fixes' into 'for-next'
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaeYxSwAKCRBZrE9hU+XO
MRzTAQCPUKVOpSY/cjtPXVBn0uJbAo1MSvytv00Kv7dcatvrrwEA9lqmwOfl0kzr
CowEVVCD3om++W9vOsL65hachbAl1QA=
=1qkw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"asus-wmi:
- Retain battery charge threshold during boot which avoids
unsolicited change to 100%. Return -ENODATA when the limit
is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
barco-p50-gpio:
- Normalize gpio_get return values
bitland-mifs-wmi:
- Add driver for Bitland laptops (supports platform profile,
hwmon, kbd backlight, gpu mode, hotkeys, and fan boost)
dell_rbu:
- Fix using uninitialized value in sysfs write function
dell-wmi-sysman:
- Respect destination length when constructing enum strings
hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and
Omen MAX 16-ak0xxxx
input: trackpoint & thinkpad_acpi:
- Enable doubletap by default and add sysfs enable/disable
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
intel/vsec:
- Refactor to support ACPI-enumerated PMT endpoints.
pcengines-apuv2:
- Attach software node to the gpiochip
uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
wmi:
- Perform output size check within WMI core to allow simpler WMI
drivers
misc:
- acpi_driver -> platform driver conversions (a large number of
changes from Rafael J. Wysocki)
- cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77)
platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44)
platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87)
platform/x86: hp-wmi: fix fan table parsing
platform/x86: hp-wmi: add Omen 14-fb0xxx (board 8C58) support
platform/wmi: Replace .no_notify_data with .min_event_size
platform/wmi: Extend wmidev_query_block() to reject undersized data
platform/wmi: Extend wmidev_invoke_method() to reject undersized data
platform/wmi: Prepare to reject undersized unmarshalling results
platform/wmi: Convert drivers to use wmidev_invoke_procedure()
platform/wmi: Add wmidev_invoke_procedure()
platform/x86: int3472: Add support for GPIO type 0x02 (IR flood LED)
platform/x86: int3472: Parameterize LED con_id in registration
platform/x86: int3472: Rename pled to led in LED registration code
platform/x86: int3472: Use local variable for LED struct access
platform/x86: thinkpad_acpi: remove obsolete TODO comment
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
platform/x86: hp-wmi: Ignore backlight and FnLock events
platform/x86: uniwill-laptop: Fix signedness bug
platform/x86: dell_rbu: avoid uninit value usage in packet_size_write()
...
The HP Omen 16-wf1xxx (board ID: 8C77) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8C77 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Thomas Arici <absolute3d86@gmail.com>
Reported-by: Thomas Arici <absolute3d86@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221300
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260410191039.125659-5-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-n0xxx (board ID: 8A44) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_legacy_thermal_params.
Testing on board 8A44 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Prasoon Dev <prasoon5050@outlook.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260410191039.125659-4-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP OMEN MAX 16-ak0xxx (8D87) requires the same WMI queries as other
Victus S devices, hence it has been added to the corresponding list.
For this reason, platform_profile_victus_s_get_ec() will be called
during thermal_profile_setup() and victus_s_powersource_event() to
obtain hardware state (platform profile) by reading from the Embedded
Controller, however, this particular board's EC does not seem to expose
the platform profile value, unlike other boards. Hence EC readback is
disabled.
Testing on board 8D87 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Jinyang Zhu <Jakie101@proton.me>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260410191039.125659-3-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For Victus S devices, the BIOS fan table header was being incorrectly
parsed as:
struct {
u8 unknown;
u8 num_entries;
}
The first field should be num_fans and the second should be unknown. It
is pure coincidence that interpreting an "unknown" field as "num_entries"
worked on multiple device, however for board 8D87 (in an upcoming patch),
this assumption fails, and the hp-wmi driver fails to load.
We fix this by correcting the header definition and compensating for
num_entries by parsing each entry of the fan table until an all-NULL row
is obtained, mirroring the behavior of OMEN Gaming Hub on Windows.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260410191039.125659-2-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Board 8C58 (HP Omen Transcend Gaming Laptop 14-fb0xxx) appears to use
the same thermal profile handling as other supported Omen systems,
including board 8E41.
Add it to omen_thermal_profile_boards so hp-wmi can expose the firmware
thermal profiles through the platform_profile interface.
Tested on Omen 14-fb0xxx: the profile handler exposes cool, balanced,
and performance modes, and selecting performance increases sustained CPU
package power under load.
Signed-off-by: Shaun Varghese <shaunvarghese43@gmail.com>
Link: https://patch.msgid.link/20260410174651.1424000-1-shaunvarghese43@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge ACPI core driver core driver updates and assorted driver updates
related to ACPI support for 7.1-rc1:
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
* acpi-driver:
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: AC: Define ACPI_AC_CLASS in one place
ACPI: driver: Do not set acpi_device_class() unnecessarily
ACPI: driver: Avoid using pnp.device_class for netlink handling
ACPI: event: Redefine acpi_notifier_call_chain()
ACPI: driver: Do not set acpi_device_name() unnecessarily
ACPI: video: Consolidate pnp.bus_id workarounds handling
ACPI: video: Rework checking for duplicate video bus devices
driver core: auxiliary bus: Introduce dev_is_auxiliary()
ACPI: PAD: Rearrange notify handler installation and removal
ACPI: AC: Get rid of unnecessary declarations
On HP OmniBook 7 the keyboard backlight and FnLock keys are handled
directly by the firmware. However, they still trigger WMI events which
results in "Unknown key code" warnings in dmesg.
Add these key codes to the keymap with KE_IGNORE to silence the warnings
since no software action is needed.
Tested-by: Artem S. Tashkinov <aros@gmx.com>
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221181
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260403080155.169653-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_hwmon_priv.mode and .pwm are written by hp_wmi_hwmon_write() in
sysfs context and read by hp_wmi_hwmon_keep_alive_handler() in a
workqueue. A concurrent write and keep-alive expiry can observe an
inconsistent mode/pwm pair (e.g. mode=MANUAL with a stale pwm).
Add a mutex to hp_wmi_hwmon_priv protecting mode and pwm. Hold it in
hp_wmi_hwmon_write() across the field update and apply call, and in
hp_wmi_hwmon_keep_alive_handler() before calling apply.
In hp_wmi_hwmon_read(), only the pwm_enable path reads priv->mode; use
scoped_guard() there to avoid holding the lock across unrelated WMI
calls.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-6-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
gpu_delta was declared as u8. If the firmware specifies a GPU RPM
lower than the CPU RPM, subtracting them causes an underflow
(e.g. 10 - 20 = 246), which forces the GPU fan to remain clamped at
U8_MAX (100% speed) during operation.
Change gpu_delta to int and use signed arithmetic. Existing signed logic
in hp_wmi_fan_speed_set() correctly handles negative deltas.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-5-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, schedule_delayed_work() is used to queue the 90s keep-alive
timer. If a user manually changes the fan speed at T=85s,
schedule_delayed_work() leaves the existing timer in place as it is a
no-op if the work is already pending. This results in the keep-alive
timer firing unnecessarily at T=90s, just 5 seconds after the user
action.
Replace schedule_delayed_work() with mod_delayed_work() to reset the
90s timer whenever fan settings are applied. This guarantees a full 90s
delay after every user interaction, preventing redundant keep-alive
executions and improving efficiency.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-4-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_apply_fan_settings() uses cancel_delayed_work_sync() to stop
the keep-alive timer in AUTO mode. However, since
hp_wmi_apply_fan_settings() is also called from the keep-alive
handler, a race condition with a sysfs write can cause the handler to
wait on itself, leading to a deadlock.
Replace cancel_delayed_work_sync() with cancel_delayed_work() in
hp_wmi_apply_fan_settings() to avoid the self-flush deadlock.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-3-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_get_fan_count_userdefine_trigger() can fail, but its return
value was silently ignored in hp_wmi_apply_fan_settings() for
PWM_MODE_MAX/AUTO. Propagate these errors consistently.
Additionally, handle the return value of hp_wmi_apply_fan_settings()
in its callers by adding appropriate warnings on failure, and remove an
unreachable "return 0" at the end of the function.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-2-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-k0xxx (board ID: 8A4D) has the same WMI interface as
other Victus S boards, but requires additional quirks for correctly
switching thermal profile.
Create a new quirk omen_v1_legacy_thermal_params which allows a board to
use Omen V1 thermal values, but rely on the older legacy
HP_OMEN_EC_THERMAL_PROFILE_OFFSET. Add the DMI board name to
victus_s_thermal_profile_boards[] table and map it to the newly added
quirk.
Testing on board 8A4D confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Qinfeng Wu <qwqgong@gmail.com>
Reported-by: Qinfeng Wu <qwqgong@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221150
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260302073525.71037-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-wf1xxx (board ID: 8C76) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to board 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8C76 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: WJ Enderlava <jie7172585@gmail.com>
Reported-by: WJ Enderlava <jie7172585@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221149
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260227154106.226809-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-xf0xxx board 8BCA uses the same Victus-S fan and
thermal WMI path as other recently supported Omen/Victus boards,
but it requires Omen v1 thermal profile parameters for correct
platform profile behavior.
Add board 8BCA to victus_s_thermal_profile_boards[] and map it
to omen_v1_thermal_params.
Validated on HP Omen 16-xf0xxx (board 8BCA):
- /sys/firmware/acpi/platform_profile exposes
low-power/balanced/performance
- fan RPM reporting works (fan1_input/fan2_input)
- manual fan control works through hp-wmi hwmon (pwm1/pwm1_enable)
Signed-off-by: Raed <thisisraed@outlook.com>
Link: https://patch.msgid.link/20260311131338.965249-1-youaretalkingtoraed@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ACPI_AC_CLASS symbol is defined in several places in the same way
which is rather unfortunate.
Instead, define it in one common header file (acpi_bus.h) so that it is
accessible to all of its users.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/6163384.MhkbZ0Pkbq@rafael.j.wysocki
Some systems have much larger amounts of enumeration attributes
than have been previously encountered. This can lead to page allocation
failures when using kcalloc(). Switch over to using kvcalloc() to
allow larger allocations.
Fixes: 6b2770bfd6 ("platform/x86: hp-bioscfg: enum-attributes")
Cc: stable@vger.kernel.org
Reported-by: Paul Kerry <p.kerry@sheffield.ac.uk>
Tested-by: Paul Kerry <p.kerry@sheffield.ac.uk>
Closes: https://bugs.debian.org/1127612
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260225210646.59381-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reverse engineering of the HP Omen Windows utility shows that for performance
mode it uses the same codes listed in hp_thermal_profile_omen_v1. Therefore it
seems sufficient to add the board model name to omen_thermal_profile_boards.
Tested on Omen 14-fb1xxx: CPU power in performance profile reaches the Windows
limit (65W), instead of 45W in automatic BIOS mode. Max fan speed was reached
as well.
Link: https://patch.msgid.link/20260203164832.40514-1-plotnikovanton@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch enables Victus thermal profile support for the HP
Victus 16-d0xxx. It does so by adding model's DMI board name 88F8 to
victus_thermal_profile_boards.
Tested on a Victus 16-d0xxx:
- Victus thermal profile choices available (quiet, balanced, performance)
instead of the default ones (cool, quiet, balanced, performance);
- Profile switching works correctly;
- About 4% increase in FPS using benchmark Cyberpunk 2077 on
performance profile;
- No noticeable regressions.
Signed-off-by: Victor Lattaro Volpini <victorlattaro@proton.me>
Link: https://patch.msgid.link/20260210000048.250280-1-victorlattaro@proton.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-wf0xxx (board ID: 8BAB) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to HP Omen 16-wf1xxx, board ID: 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on HP Omen 16-wf0xxx confirmed that platform profile is
registered successfully and fan RPMs are readable and controllable.
Suggested-by: Noah Provenzano <noahpro@gmail.com>
Tested-by: Juan Martin Morales <juanm4morales@gmail.com>
Reported-by: Juan Martin Morales <juanm4morales@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220639
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260216072003.90151-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-xd0xxx (board ID: 8BCD) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to HP Omen 16-wf1xxx, board ID: 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on HP Omen 16-xd0xxx confirmed that platform profile is
registered successfully and fan RPMs are readable and controllable.
Tested-by: Varad Amol Pisale <varadpisale.work@gmail.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260218050235.94687-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
amd/pmf:
- Added a module parameter to disable the Smart PC function
- Introduce new interface to export NPU metrics
- Prevent TEE errors after hibernate
- Use ring buffer to store custom BIOS input values
amd:
- Use scope-based cleanup for wbrf_record()
asus-wmi:
- add keyboard brightness event handler
- Add support for multiple kbd led handlers
- remove unused keyboard backlight quirk
crypto:
- ccp - Add an S4 restore flow
- ccp - Declare PSP dead if PSP_CMD_TEE_RING_INIT fails
- ccp - Factor out ring destroy handling to a helper
- ccp - Send PSP_CMD_TEE_RING_DESTROY when PSP_CMD_TEE_RING_INIT fails
HID: asus:
- add support for the asus-wmi brightness handler
- early return for ROG devices
- fortify keyboard handshake
- initialize additional endpoints only for certain devices
- listen to the asus-wmi brightness device instead of creating one
- move vendor initialization to probe
- simplify RGB init sequence
- use same report_id in response
hp-wmi:
- Add EC offsets to read Victus S thermal profile
- add manual fan control for Victus S models
- fix platform profile values for Omen 16-wf1xxx
- implement fan keep-alive
- order include headers
ideadpad-laptop:
- Clean up style warnings and checks
intel/pmc:
- Change LPM mode fields to u8
- Enable substate residencies for multiple PMCs
- Move LPM mode attributes to PMC
- Remove double empty line
intel/pmt:
- Replace sprintf() with sysfs_emit()
intel/uncore-freq:
- Replace sprintf() with scnprintf()
- Replace sprintf() with sysfs_emit()
intel-wmi-sbl-fw-update:
- Use new buffer-based WMI API
intel/wmi: thunderbolt:
- Use new buffer-based WMI API
ISST:
- Add missing write block check
- Check for admin capability for write commands
- Optimize suspend/resume callbacks
- Store and restore all domains data
lenovo-wmi-capdata:
- Add support for Capability Data 00
- Add support for Fan Test Data
lenovo-wmi-{capdata,other}:
- Fix HWMON channel visibility
- Support multiple Capability Data
lenovo-wmi-capdata:
- Wire up Fan Test Data
lenovo-wmi-helpers:
- Convert returned buffer into u32
lenovo-wmi-other:
- Add HWMON for fan reporting/tuning
mlx-platform:
- Add support DGX flavor of next-generation 800GB/s ethernet switch.
- Add support for new Nvidia DGX system based on class VMOD0010
Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata:
- Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata
surface: aggregator_registry:
- Add Surface Pro 11 (QCOM)
surface:
- Replace deprecated strcpy() in surface_button_add()
thinkpad_acpi:
- Add support to detect hardware damage detection capability.
- Add sysfs to display details of damaged device.
tools/power/x86/intel-speed-select:
- Allow non root users
- Fix file descriptor leak in isolate_cpus()
- Use pkg-config for libnl-3.0 detection
- v1.25 release
uniwill:
- Implement cTGP setting
uniwill-laptop:
- Introduce device descriptor system
wmi:
- Add helper functions for WMI string conversions
- Add kunit test for the marshalling code
- Add kunit test for the string conversion code
wmi-bmof:
- Use new buffer-based WMI API
wmi:
- Introduce marshalling support
wmi: string-kunit:
- Add missing oversized string test case
wmi:
- Update driver development guide
xiaomi-wmi:
- Use new buffer-based WMI API
yogabook:
- Clean up code style
Merges:
- Merge branch 'fixes' of into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into for-next
- Merge branch 'platform-drivers-x86-asus-kbd' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaY9soAAKCRBZrE9hU+XO
MT5EAP9aK1wHlVGDfuC2k07X4gk8ZX5Ks9anXJlBcZFrpC9okwD5Aeqj3XLK338x
g5k/x+r87GwXjcBLnFi2TnNA2c8SWQY=
=eGAm
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
The current implementation for Victus S thermal profiles only supports
setting the profile. The driver was missing the logic to read the
hardware state, meaning it would default to "Balanced" on driver load,
overriding the currently active profile. Furthermore, the driver could
not detect if the firmware reset the profile on a power source change.
Statically store the known EC offsets for reading thermal profile in the
new .ec_tp_offset field of struct thermal_profile_params. Implement
platform_profile_victus_s_get_ec() to use this offset to read the real
hardware state. Additionally, update the power source event notifier to
use the actual hardware state when re-triggering CPU power limits
actualization.
Testing on HP Omen 16-wf1xxx (board ID 8C78) confirmed that the thermal
profile is now persistent across driver loads and power source change
events.
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260121182858.66363-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp-bioscfg has a MODULE_DEVICE_TABLE with a GUID in it that looks
plausible, but the module doesn't automatically load on applicable
systems.
This is because the GUID has some lower case characters and so it
doesn't match the modalias during boot. Update the GUIDs to be all
uppercase.
Cc: stable@vger.kernel.org
Fixes: 5f94f181ca ("platform/x86: hp-bioscfg: bioscfg-h")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-4-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs
attributes:
1. Off-by-one error: The loop condition used '<=' instead of '<',
causing access beyond array bounds. Since array indices are 0-based
and go from 0 to instances_count-1, the loop should use '<'.
2. Missing NULL check: The code dereferenced attr_name_kobj->name
without checking if attr_name_kobj was NULL, causing a null pointer
dereference in min_length_show() and other attribute show functions.
The panic occurred when fwupd tried to read BIOS configuration attributes:
Oops: general protection fault [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg]
Add a NULL check for attr_name_kobj before dereferencing and corrects
the loop boundary to match the pattern used elsewhere in the driver.
Cc: stable@vger.kernel.org
Fixes: 5f94f181ca ("platform/x86: hp-bioscfg: bioscfg-h")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-3-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The hp-bioscfg driver attempts to register kobjects with empty names when
the HP BIOS returns attributes with empty name strings. This causes
multiple kernel warnings:
kobject: (00000000135fb5e6): attempted to be registered with empty name!
WARNING: CPU: 14 PID: 3336 at lib/kobject.c:219 kobject_add_internal+0x2eb/0x310
Add validation in hp_init_bios_buffer_attribute() to check if the
attribute name is empty after parsing it from the WMI buffer. If empty,
log a debug message and skip registration of that attribute, allowing the
module to continue processing other valid attributes.
Cc: stable@vger.kernel.org
Fixes: a34fc329b1 ("platform/x86: hp-bioscfg: bioscfg")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-2-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
HP Omen 16-wf1xxx (board ID 8C78) currently sends the incorrect
Victus-specific thermal profile values via WMI, leading to a logical
inconsistency when switching between platform profiles.
The driver currently uses Victus S values:
0x00 => Balanced / Low-Power
0x01 => Performance
However, Omen Gaming Hub logs / EC register inspection on Windows shows
that this board is intended to use:
0x30 => Balanced / Low-Power
0x31 => Performance
This patch corrects the thermal profile command values to match the
values observed from Omen Gaming Hub logs. The performance benchmarks
and peak power draw (from both CPU and GPU) show no observable change
with this correction (suggesting that the firmware is currently tolerant
of the incorrect values). However sending the correct values prevents
potential regressions after future firmware updates.
Refactor victus_s_thermal_profile_boards from a list of strings to a
dmi_system_id table and move the lookup to module init. The new struct
thermal_profile_params is used to store board-specific WMI parameters,
allowing the driver to cache these values in a static pointer. This
avoids repeated DMI string comparisons and allows marking of DMI table as
__initconst.
Testing on HP Omen 16-wf1xxx (board 8C78) confirmed WMI codes 0x30/0x31
are now sent, resolving the logical inconsistency and ensuring the value
visible in EC registers match the Windows state for this profile.
Fixes: fb146a38cb ("platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support")
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260113182604.115211-2-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The firmware on some HP laptops automatically reverts the fan speed
control to "Auto" mode after a 120 second timeout window.
To ensure that the user-selected fan profile (Max/Manual) persists,
implement a keep-alive mechanism that periodically refreshes the fan
mode trigger before the timeout occurs.
- Introduce a delayed workqueue to trigger the fan mode refresh every 90
seconds, ensuring the system maintains the correct fan mode setting.
- Integrate the refresh mechanism into hp_wmi_apply_fan_settings() to
start, update or cancel the keep-alive process based on the current
fan mode.
This ensures that the driver stays in sync with the hardware.
Tested on: HP Omen 16-wf1xxx (board ID 8C78)
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260113123738.222244-4-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add manual fan speed control and PWM reporting for HP Victus S-series
laptops.
While HPWMI_FAN_SPEED_SET_QUERY was previously added to reset max fan
mode, it is actually capable of individual fan control. This patch
implements hp_wmi_fan_speed_set() to allow manual control and hides
PWM inputs for non-Victus devices as the query is Victus specific.
The existing hp_wmi_fan_speed_max_get() query is unreliable on Victus S
firmware, often incorrectly reporting "Auto" mode even when "Max" is
active. To resolve this synchronization issue, move state tracking to
a per-device private context and apply "Auto" mode during driver
initialization to ensure a consistent starting point.
Refactor hp_wmi_apply_fan_settings() to use an intermediate ret
variable. This prepares the switch block for keep-alive logic being
added in a later patch, avoiding the need for duplicated mode check.
Tested on: HP Omen 16-wf1xxx (board ID 8C78)
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260113123738.222244-3-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The include headers in hp-wmi driver are currently not in any specific
order. As the driver continues to grow, keep the header block organized
by sorting them alphabetically.
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260113123738.222244-2-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The hp_populate_*_elements_from_package() functions in the hp-bioscfg
driver contain out-of-bounds array access vulnerabilities.
These functions parse ACPI packages into internal data structures using
a for loop with index variable 'elem' that iterates through
enum_obj/integer_obj/order_obj/password_obj/string_obj arrays.
When processing multi-element fields like PREREQUISITES and
ENUM_POSSIBLE_VALUES, these functions read multiple consecutive array
elements using expressions like 'enum_obj[elem + reqs]' and
'enum_obj[elem + pos_values]' within nested loops.
The bug is that the bounds check only validated elem, but did not consider
the additional offset when accessing elem + reqs or elem + pos_values.
The fix changes the bounds check to validate the actual accessed index.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: e6c7b3e155 ("platform/x86: hp-bioscfg: string-attributes")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB788173D7DD4EA2CB6383683DAFB0A@SYBPR01MB7881.ausprd01.prod.outlook.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The hp-wmi driver has a number of arrays that are getting new entries
and all/most entries have been added to the end of the array. As a
result, the numerical order is mixed up in a few entries.
Reorder the array entries. Split lines for each two leading chars to
make the arrays easier to read.
Add also trailing commas.
Link: https://patch.msgid.link/20251128120215.4450-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New HP Omen laptops follow the same WMI thermal profile as Victus
16-r1000 and 16-s1000.
Add DMI board 8D41 to victus_s_thermal_profile_boards.
Signed-off-by: Marcos Vega <marcosmola2@gmail.com>
Link: https://patch.msgid.link/20251108114739.9255-3-marcosmola2@gmail.com
[ij: changelog taken partially from v1]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The newer HP Omen laptops, such as Omen 16-wf1xxx, use the same
WMI-based thermal profile interface as Victus 16-r1000 and 16-s1000
models.
Add the DMI board name "8C78" to the victus_s_thermal_profile_boards
list to enable proper fan and thermal mode control.
Tested on: HP Omen 16-wf1xxx (board 8C78)
Result:
* Fan RPMs are readable
* echo 0 | sudo tee /sys/devices/platform/hp-wmi/hwmon/*/pwm1_enable
allows the fans to run on max RPM.
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20251018111001.56625-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch adds Victus 16-r0 (8bbe) and Victus 16-s0(8bd4, 8bd5) laptop
DMI board name into existing list
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20251015181042.23961-3-edip@medip.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for the Fn+P hotkey found on newer HP Victus (and probably
newer Omen) laptops. This hotkey is intended for use with Omen Gaming Hub
to change the performance profile (see [1]).
Pressing Fn+P under linux produced the following warning in dmesg:
> hp_wmi: Unknown event_id - 27 - 0x7
Implemented a handling for this event so that the hotkey cycles between the
platform profiles when triggered.
Tested on Victus 16-s1011nt (9Z791EA, MB 8C9C).
Changes in v2:
- Make the key just switches between platform profiles instead of
assigning a key event code.
- v1: https://lore.kernel.org/all/20250802213541.18791-2-edip@medip.dev/
[1]: https://jpcdn.it/img/adadf6c927ffeb75afd8038f95db400a.png
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://lore.kernel.org/r/20250814204529.18467-4-edip@medip.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch adds Victus 16-r1xxx laptop DMI board name into existing
list.
Tested on 16-r1077nt and works without any problem.
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://lore.kernel.org/r/20250728115805.20954-2-edip@medip.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: a34fc329b1 ("platform/x86: hp-bioscfg: bioscfg")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-1-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The `objs` suffix is reserved for user-space tools. Use the `y` suffix
instead, which is usually used for kernel drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250218194113.26589-4-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
