Highlights:
- amd/halo: Add Halo RGB LED driver
- amd/hsmp:
- Properly serialize probe, remove, and data paths
- Add support for protocol v7 used by Family 1AH Model 80H
- Fix error checking corner cases (largely from AI review)
- Reject negative power cap
- amd/pmc:
- Improve behavior on platforms that do not support STB
- Add T14 Gen2 AMD (20XL) to s2idle quirk list
- amd/pmf:
- Add ioctl interface to retrieve device metrics
- Add support for new metrics tables used by Family 1AH Model 80H
- arm64: qcom-hamoa-ec: Reject short responses
- asus-nb-wmi: Support ProArt key on ASUS ProArt PX13
- asus-armoury:
- Gate PPT writes behind active fan curve
- Add power limits for more models
- dell-wmi-base: Fix handling of ultra performance key
- dell-wmi-sysman: Don't hex dump attribute security buffer
- hp-bioscfg:
- Various fixes
- Improve reduced ACPI packages support (necessary for HP EliteBook 840 G2)
- lg-laptop:
- Fix LED resource handling
- Add support for events used in newer models
- Fix keyboard backlight support on LG Gram 16T90SP
- hp-wmi:
- Generalize thermal params to board params
- Manage CPU and GPU PWM independently
- Add GPU MUX switch support
- Add Victus 15-fb0xxx support
- Add OMEN MAX 16-ak0xxx, OMEN 16-n0xxx, OMEN 16-wd0xxx, OMEN
16-wf0xxx, and OMEN board ID 8D88 support
- Add OMEN Transcend 16-u0xxx support
- huawei: Add support for Fn-lock ACPI interface found on newer Huawei
laptops such as MateBook 14 2024
- ISST:
- Improve input validation (many fixes)
- Disallow SST-CP (core-power) feature if perf profile add fails
- lenovo/yb9-kbdock: Add driver for Yoga Book 9 14IAH10
- lenovo/ymc:
- Extend hinge switch query to support Yoga 9 2-in-1 14IPH11
- Prevent loading on Yoga Book 9 14IAH10 to avoid duplicated input
nodes
- msi-ec: Add MSI Raider A18 HX A9WJG and MSI Katana GF76 11UEK support
- msi-wmi: Add MSI Claw M-Center keys support
- oxpec: Add support for OneXPlayer X2 Mini Pro
- redmi-wmi: Report kbd backlight cycle, OEM preset power mode, and FnLock
toggle events to userspace
- samsung-galaxybook: Add Samsung Galaxy Book6 Pro support
- thinkpad_acpi: Add USB-C Security support
- uniwill-laptop:
- Add keyboard backlight, AC auto boot, and USB powershare support
- Add MACHENIKE L16 Pro, AiStone X4SP4NAL, and Avell A60 MUV support
- Make lightbar max brightness configurable and add support for
LAPQC71A/B
- Major refactoring efforts:
- Stop setting acpi_device_name/class() and pnp.device_class to
faciliate their eventual removal
- Many rollback/remove path fixes (presumably mostly found by AI)
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- reject missing gaming WMI results
amd/hsmp:
- ACPI HSMP refcounted sockets and coordinated release
- Add HSMP messages for Family 1Ah, Model 50h-5Fh
- Add IOCTL_GET_TELEMETRY_DATA for metric table reads
- Clear mdev.this_device on deregister
- Enable protocol version 7 metric tables on the ACPI driver
- Gate the data plane on a fully initialized socket
- Map the metric table with ioremap() and unmap it explicitly
- Pass struct device explicitly to ACPI mailbox parsers
- Reject negative power cap writes in hwmon
- Serialize ACPI HSMP probe and remove with an rwsem
- Serialize per-socket metric table reads with a mutex
- Serialize the data plane against socket teardown
- Source metric-table size from firmware
- Unify response_sz validation to an upper-bound check
- Validate ACPI UID before parsing socket index
- Validate _DSD mailbox sub-package element count
amd:
- Introduce Halo Box RGB LED driver
amd/pmc:
- Add T14 Gen2 AMD (20XL) to s2idle quirk list
- Do not fail probe when STB init fails
- Fix LPS0 and debugfs leaks when STB init fails
- Fix msg_port restoration in amd_stb_debugfs_open_v2()
- Only expose stb_read after telemetry buffer is mapped
- Propagate SMU errors and validate S2D address
- Restore msg_port on amd_stb_s2d_init() error paths
amd/pmf:
- Add 1AH_M80H device IDs and extended SMU mailbox registers
- Add 1AH_M80H metrics table and NPU metrics support
- Add missing newline in dev_err message
- Add util layer and userspace character device interface
- Implement util layer ioctl handler
- Introduce AMD PMF testing tool for driver metrics and features
- Move debug helper functions to UAPI header
- Move metrics code to dedicated file
- Refactor NPU metrics for platform extensibility
- store BIOS output values for user-space metrics via util IOCTL
- Store commonly used enums in the header file
- Use per-SoC smu_regs struct for SMU mailbox registers
- Use upper/lower_32_bits() in amd_pmf_set_dram_addr()
arm64: qcom-hamoa-ec:
- reject incomplete responses
asus-armoury:
- Add power limits for ROG Strix SCAR 16 (G635LX)
- Add power limits quirk for FA401KM
- Add power limits quirk for FA608WV
- add support for FX517ZR
- add support for HN7306EA and HN7306EAC
- fix Use-After-Free and memory leak in driver init
- gate PPT writes behind active fan curve
- use cleanup.h to manage tunables
asus-laptop:
- Stop setting acpi_device_name/class()
asus-nb-wmi:
- map ProArt key (0x8b) to KEY_PROG3
asus-wireless:
- Fail probe when there is no ACPI match
asus-wmi:
- fix resource leaks on probe failure
dell-ddv:
- Use no_free_ptr() to simplify error handling
dell-privacy:
- Fix race condition
dell-smbios:
- Pass device to callbacks
dell-smbios-wmi:
- Fix chardev resource management
- Replace global list with single item
dell-wmi-base:
- Fix handling of ultra performance key
- Fix resource leak on module load failure
dell-wmi-sysman:
- Don't hex dump attribute security buffer
- Fix instance ID bounds
Documentation/ABI:
- add testing entry for AMD PMF character device interface
eeepc-laptop:
- Stop setting acpi_device_name/class()
fujitsu-laptop:
- Stop setting acpi_device_name/class()
fujitsu-tablet:
- Stop setting acpi_device_name/class()
hp-bioscfg:
- accept reduced ACPI packages from older HP BIOS
- advance elem past consumed array elements
- bound ordered-list parsing by the package count
- fix heap OOB read in sk_store() and kek_store()
- fix heap OOB read on empty password write
- fix new_password_store() overwriting current_password
- fix off-by-one write in hp_get_string_from_buffer()
- fix ORD_LIST_ELEMENTS never being parsed
- fix password encoding bounds check
- pass validated element count to package parsers
- warn on element type mismatch instead of failing
hp-wmi:
- Add dual-channel PWM fan control
- Add GPU MUX switch support
- Add OMEN board 8A43 thermal profile support
- Add OMEN board 8BA9 thermal profile support
- Add OMEN board 8BAA thermal profile support
- Add OMEN board 8D88 thermal profile support
- Add OMEN Transcend 16 8BB3 support
- Add support for OMEN MAX 16-ak0xxx (8DD6)
- Add Victus 15-fb0xxx support
- Drive fan control from board data
- Introduce board-specific feature data
huawei-wmi:
- add ACPI fallback for Fn-lock on newer models
ideapad-laptop:
- Fix driver unregistration order
int1092:
- Fix info leak in parse_package()
- Fix potential memory leak in sar_probe()
intel/pmc:
- initialize empty PMT read result
ishtp_eclite:
- Fix ACPI device reference leak in probe error path
ISST:
- Add a NULL check for sst_inst[]
- Just allow 2 bits for SST feature enable
- Return error during profile addition
- Use PP level enable mask
- Validate level in perf mask ioctls
- Validate logical CPU id and clos id
- Validate max level for set feature
- Validate parameter for core power state
- Validate parameter for frequency and priority
- Validate socket ID in clos_assoc ioctl
lenovo:
- Add Yoga Book 9 keyboard dock detection driver
lenovo: lenovo-ymc:
- Suppress probe on Yoga Book 9 14IAH10
lenovo/ymc:
- Only match lower byte in WMI lid switch query response
lg-laptop:
- Add support for additional events
- Add support for native ACPI events
- Fix keyboard backlight support on LG Gram 16T90SP
- Fix LED resource handling
- Improve WMAB control method support
MAINTAINERS:
- update Intel PMC Core maintainer contact
mlxbf-bootctl:
- fix the build error with FIELD_PREP()
mlxbf-pmc:
- Check ACPI_COMPANION() against NULL
msi-ec:
- Add MSI Katana GF76 11UEK EC firmware
- Add MSI Raider A18 HX A9WJG EC firmware
msi-wmi:
- Add MSI Claw M-Center keys
- Reformat msi_wmi_notify()
oxpec:
- Add support for OneXPlayer X2 Mini Pro
panasonic-laptop:
- Fix sentinel write past pcc->sinf[]
- Stop setting acpi_device_name/class()
power: supply: surface_{battery,charger}:
- Consistently define ssam_device_ids using named initializers
redmi-wmi:
- report EC state change events
samsung-galaxybook:
- Add SAMB430 device ID
sony-laptop:
- Stop setting acpi_device_class()
sonypi:
- Stop setting acpi_device_name/class()
surface: acpi-notify:
- Check ACPI companion before use
surface: aggregator:
- Consistently define ssam_device_ids using named initializers
surface: surfacepro3_button:
- Stop setting acpi_device_name()
think-lmi:
- Fix certificate thumbprint sysfs output
- Fix current password length check
- Free system certificate signatures
thinkpad_acpi:
- Add USB-C Security (USCS) support
- Fix fan speed reporting on Edge E330
- Fix USB-C Security probe failure on unsupported platforms
- Stop setting acpi_device_class()
topstar-laptop:
- Stop setting acpi_device_name/class()
toshiba_acpi:
- Do not use uninitialized device_class
toshiba_bluetooth:
- Use more common error handling code in toshiba_bt_rfkill_probe()
toshiba_haps:
- Do not use uninitialized device_class
uniwill-laptop:
- Add 2 new feature defines for TUXEDO devices
- Add AC auto boot support
- Add Avell A60 MUV support
- Add keyboard backlight support
- Add lightbar support for LAPQC71A/B
- Add support for the AiStone X4SP4NAL
- Add support for the MACHENIKE L16 Pro
- Add support for USB powershare
- Handle screen-related events
- Remove single color keyboard detection
- Split uniwill_kbd_led_init()
x86/platform/olpc: xo15:
- Stop setting acpi_device_name/class()
xo15-ebook:
- Stop setting acpi_device_name/class()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaow0EgAKCRBZrE9hU+XO
MRvYAP412gjYokIoj6ncE2OD897gX2d5BwUVKkraQHoevxLm8wEAikY+iYbdOv3a
fqhPeCDZSRBn6yEBHewY7cdotNDn2go=
=d/Uf
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen
"Highlights:
Major refactoring effort: stop setting acpi_device_name/class() and
pnp.device_class to facilitate their eventual removal
Many rollback/remove path fixes (presumably mostly found by AI)
Miscellaneous cleanups / refactoring / improvements
amd/halo:
- Add Halo RGB LED driver
amd/hsmp:
- Properly serialize probe, remove, and data paths
- Add support for protocol v7 used by Family 1AH Model 80H
- Fix error checking corner cases (largely from AI review)
- Reject negative power cap
amd/pmc:
- Improve behavior on platforms that do not support STB
- Add T14 Gen2 AMD (20XL) to s2idle quirk list
amd/pmf:
- Add ioctl interface to retrieve device metrics
- Add support for new metrics tables used by Family 1AH Model 80H
qcom-hamoa-ec (arm64):
- Reject short responses
asus-nb-wmi:
- Support ProArt key on ASUS ProArt PX13
asus-armoury:
- Gate PPT writes behind active fan curve
- Add power limits for more models
dell-wmi-base:
- Fix handling of ultra performance key
dell-wmi-sysman:
- Don't hex dump attribute security buffer
hp-bioscfg:
- Various fixes
- Improve reduced ACPI packages support (necessary for HP EliteBook 840 G2)
lg-laptop:
- Fix LED resource handling
- Add support for events used in newer models
- Fix keyboard backlight support on LG Gram 16T90SP
hp-wmi:
- Generalize thermal params to board params
- Manage CPU and GPU PWM independently
- Add GPU MUX switch support
- Add Victus 15-fb0xxx support
- Add OMEN MAX 16-ak0xxx, OMEN 16-n0xxx, OMEN 16-wd0xxx, OMEN
16-wf0xxx, and OMEN board ID 8D88 support
- Add OMEN Transcend 16-u0xxx support
huawei:
- Add support for Fn-lock ACPI interface found on newer Huawei
laptops such as MateBook 14 2024
ISST:
- Improve input validation (many fixes)
- Disallow SST-CP (core-power) feature if perf profile add fails
lenovo/yb9-kbdock:
- Add driver for Yoga Book 9 14IAH10
lenovo/ymc:
- Extend hinge switch query to support Yoga 9 2-in-1 14IPH11
- Prevent loading on Yoga Book 9 14IAH10 to avoid duplicated input
nodes
msi-ec:
- Add MSI Raider A18 HX A9WJG and MSI Katana GF76 11UEK support
msi-wmi:
- Add MSI Claw M-Center keys support
oxpec:
- Add support for OneXPlayer X2 Mini Pro
redmi-wmi:
- Report kbd backlight cycle, OEM preset power mode, and FnLock
toggle events to userspace
samsung-galaxybook:
- Add Samsung Galaxy Book6 Pro support
thinkpad_acpi:
- Add USB-C Security support
uniwill-laptop:
- Add keyboard backlight, AC auto boot, and USB powershare support
- Add MACHENIKE L16 Pro, AiStone X4SP4NAL, and Avell A60 MUV support
- Make lightbar max brightness configurable and add support for
LAPQC71A/B"
* tag 'platform-drivers-x86-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (152 commits)
platform/x86: think-lmi: Fix current password length check
platform/x86: redmi-wmi: report EC state change events
MAINTAINERS: update Intel PMC Core maintainer contact
platform/x86: oxpec: Add support for OneXPlayer X2 Mini Pro
platform/x86: thinkpad_acpi: Fix fan speed reporting on Edge E330
platform/x86: msi-ec: Add MSI Katana GF76 11UEK EC firmware
platform/x86: think-lmi: Fix certificate thumbprint sysfs output
mlxbf-bootctl: fix the build error with FIELD_PREP()
platform/x86: think-lmi: Free system certificate signatures
platform/x86: ISST: Add a NULL check for sst_inst[]
platform/x86: ISST: Return error during profile addition
platform/x86: ISST: Just allow 2 bits for SST feature enable
platform/x86: ISST: Use PP level enable mask
platform/x86: ISST: Validate parameter for frequency and priority
platform/x86: ISST: Validate parameter for core power state
platform/x86: ISST: Validate max level for set feature
platform/x86: ISST: Validate logical CPU id and clos id
platform/x86: ISST: Validate level in perf mask ioctls
platform/x86: ISST: Validate socket ID in clos_assoc ioctl
platform/x86/amd/hsmp: Reject negative power cap writes in hwmon
...
STB (Spill to DRAM) is an optional debugging facility that is only enabled
through the enable_stb module parameter. On some platforms the SMU refuses
the S2D setup outright, and on long-running systems the large telemetry
region can fail to ioremap. In either case amd_stb_s2d_init() returns an
error and, because probe treated that as fatal, the entire PMC driver
failed to load - silently disabling s0i3 support even though STB is only a
debug aid.
Downgrade the failure to a warning and continue probing so that s0i3
support via the LPS0 handler no longer depends on an optional debug
feature.
Since probe no longer aborts on this path, the LPS0 and debugfs unwinding
added by the earlier fix in this series becomes unreachable and is removed.
Reported-by: Francis De Brabandere <francisdb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221759
Tested-by: Francis De Brabandere <francisdb@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-7-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amd_pmc_probe() registers the LPS0 s2idle handler with
acpi_register_lps0_dev() and creates the driver's debugfs directory before
calling amd_stb_s2d_init(), which is the last step in probe that can fail.
When amd_stb_s2d_init() fails (for example the S2D telemetry region cannot
be ioremapped on a long-running system, or the SMU rejects the S2D setup)
the error path only calls pci_dev_put() and returns. This leaves
amd_pmc_s2idle_dev_ops on the global lps0_s2idle_devops_head list and leaks
the debugfs directory, while the devm-managed resources backing the handler
are torn down.
Reloading the module then walks the corrupted list in
acpi_register_lps0_dev() and hits:
list_add corruption. next->prev should be prev, but was NULL.
kernel BUG at lib/list_debug.c:29!
acpi_register_lps0_dev+0x44/0x80
amd_pmc_probe+0x224/0x380 [amd_pmc]
platform_probe+0x67/0x90
Even without a reload, the stale registration means the next s2idle
transition calls into torn-down driver state.
Unwind the debugfs directory and the LPS0 registration on the
amd_stb_s2d_init() error path. acpi_unregister_lps0_dev() is safe to call
unconditionally here: it is guarded on the same conditions as
acpi_register_lps0_dev(), which is exactly what amd_pmc_remove() already
relies on.
Reported-by: Francis De Brabandere <francisdb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221759
Tested-by: Francis De Brabandere <francisdb@gmail.com>
Fixes: 83ad6974dd ("platform/x86/amd/pmc: Move STB block into amd_pmc_s2d_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-6-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amd_stb_s2d_init() creates the v2 "stb_read" debugfs node before mapping
the telemetry buffer into dev->stb_virt_addr, leaving a window during probe
where a read faults on a NULL dev->stb_virt_addr in
amd_stb_debugfs_open_v2()/amd_stb_handle_efr().
This becomes trivial to hit once a failed STB init no longer aborts probe
(next patch), which leaves the node registered with a NULL buffer. Create
it only after dev->stb_virt_addr is mapped.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-5-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amd_stb_s2d_init() discards the return value of several S2D SMU commands.
When the SMU refuses a command (e.g. "SMU cmd failed. err: 0xff") the
failure is only noticed indirectly - if at all - and reported as -EIO,
masking the real error.
More seriously, the S2D_PHYS_ADDR_LOW/HIGH return values are ignored, so
on failure phys_addr_low/hi are left uninitialised and the assembled
address is passed straight to devm_ioremap(). When the SMU leaves them at
zero this maps physical address 0 and trips the ioremap-on-RAM warning:
amd_pmc AMDI000B:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 13 PID: 4592 at arch/x86/mm/ioremap.c:...
Check the return value of each SMU command and propagate it, and reject a
zero physical address before calling devm_ioremap().
Reported-by: Francis De Brabandere <francisdb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221759
Tested-by: Francis De Brabandere <francisdb@gmail.com>
Fixes: 3d7d407dfb ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-4-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amd_stb_debugfs_open_v2() switches dev->msg_port to MSG_PORT_S2D to query
S2D telemetry but only restores it to MSG_PORT_PMC on one path. The early
return on the dump_custom_stb path (and the error/allocation returns) leave
the port stuck on MSG_PORT_S2D, so subsequent SMU communication - including
the s2idle prepare/restore handlers - is directed at the wrong mailbox.
Consolidate the exit path through a single label so the message port is
always restored, mirroring the fix in amd_stb_s2d_init().
Reported-by: sashiko.dev
Link: https://sashiko.dev/#/patchset/20260717162023.956346-1-mario.limonciello%40amd.com
Fixes: 2851f4f8ed ("platform/x86/amd/pmc: Define enum for S2D/PMC msg_port and add helper function")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-3-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
dev->msg_port is switched to MSG_PORT_S2D before issuing the S2D SMU
commands but is only restored to MSG_PORT_PMC on the success path. The
early "return -EIO" and "return -ENOMEM" leave the port stuck on
MSG_PORT_S2D, so all subsequent SMU communication - including the s2idle
prepare/restore handlers - is directed at the wrong mailbox.
Consolidate the exit path through a single label so the message port is
always restored.
Fixes: 3d7d407dfb ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-2-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ThinkPad T14 Gen 2 AMD was sold under two machine types, 20XK and
20XL, but only 20XK has been in the s2idle quirk list since the quirk
was introduced in commit 455cd867b8 ("platform/x86: thinkpad_acpi:
Add a s2idle resume quirk for a number of laptops").
On 20XL machines the firmware SMI handler therefore still runs on the
NVMe D3->D0 transition when exiting suspend-to-idle. With IOMMU
translation enabled (the default), this intermittently stalls resume
for ~10.25 seconds: seven devices across three root ports (nvme, both
xhci_hcd functions, xhci-pci-renesas, snd_hda_intel x2, snd_rn_pci_acp3x)
block in pci_pm_resume_noirq and are released simultaneously, consistent
with all cores being held in SMM.
Add the missing 20XL machine type, mirroring the existing 20XK entry.
This is the same class of omission fixed by commit 9a469c6dfa
("platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle
quirk list").
Verified on a ThinkPad T14 Gen 2a (type 20XLS41C00, BIOS R1MET62W 1.32,
kernel 6.12.95): with this entry the quirk message appears at probe and
a 14-hour suspend resumes in ~1s with no noirq stalls, where previously
even short suspends could hit the ~10s delay. A further two-day soak
(short naps and two ~14-hour suspends) showed every resume clean.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221755
Signed-off-by: Yap Weei Choong <ywc8891@gmail.com>
Tested-by: Yap Weei Choong <ywc8891@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260717060744.1252065-2-ywc8891@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
PMFW reports the S0i3 subsystem accounting per SoC, and the set of IP
blocks and their bit ordering differ across SoC generations. Family
1Ah, Model 80h accounts for a distinct set of 19 IP blocks, which does
not match the ordering in soc15_ip_blk[].
Commit 043af31c8d ("platform/x86/amd/pmc: Add PMC driver support for
AMD 1Ah M80H SoC") wired amd_1ah_m80_cpu_info to soc15_ip_blk[], so
M80H has been reporting incorrect S0i3 accounting via debugfs.
Add soc15_ip_blk_v3[] with the correct ordering and point
amd_1ah_m80_cpu_info at it.
Fixes: 043af31c8d ("platform/x86/amd/pmc: Add PMC driver support for AMD 1Ah M80H SoC")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260707122852.2066987-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
dmi_get_system_info(...) can return NULL. Using that as %s arguments
of dev_info() would log "(null)" (as part of a message like
'... System Vendor: "(null)", Product Name: "(null)" ...'), which may
be confusing for users.
Use Elvis operator to print "(Unknown)" instead.
Fixes: 428b9fd2dc ("platform/x86/amd/pmc: Add delay_suspend module parameter")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606251540.Nr2BtaNu-lkp@intel.com/
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Link: https://patch.msgid.link/20260626220210.1761783-2-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for ds1307,
fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes
-----BEGIN PGP SIGNATURE-----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=SCOZ
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
It was reported that suspend-then-hibernate stopped working with modern
systemd versions on AMD Cezanne systems. The reason for this breakage
was because systemd switched to using alarmtimer instead of the wakealarm
sysfs file.
On AMD Cezanne systems, amd_pmc_verify_czn_rtc() programs a secondary
timer with the alarm time. This was introduced by
commit 59348401eb ("platform/x86: amd-pmc: Add special handling for
timer based S0i3 wakeup"). However, this function uses rtc_read_alarm(),
which only reads the aie_timer, not the next expiring timer from the
timerqueue.
When both alarmtimer and wakealarm are active, the first expiring timer
might be the alarmtimer, but amd_pmc_verify_czn_rtc() would only see
the aie_timer, potentially missing the earlier alarm.
Switch to rtc_read_next_alarm() to read whichever timer will fire next.
Also handle -ENOENT (no alarm pending) explicitly as a non-error case.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3591
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260521043714.1022930-3-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The ECs in the IdeaPads that need the delay_suspend quirk send lots
of messages when charging, which not only causes intermediate wakeups
when suspended, but also prevents the device from reaching the deepest
suspend state.
Because of this amd_pmc_intermediate_wakeup_need_delay() returns false
during intermediate wakeups and amd_pmc_want_suspend_delay() is called.
So far it always logged its "Delaying suspend by 2.5s ..." messages
then, which spams dmesg. This commit makes sure that those messages are
only logged once per suspend.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221383
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-5-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enabling the new delay_suspend module parameter delays suspend for
2.5 seconds which is known to help for some AMD-based Lenovo Laptops
that otherwise failed to send/receive events for key presses or the
lid switch after s2idle. Apparently the EC needs to do some things
in the background before suspend or it gets into a bad state.
There are many reports of AMD-based laptops (mostly but not exclusively
IdeaPads) about similar issues on the web; this parameter gives
affected users an easy way to try out if their issues have the same
root cause and to work around them until their specific device is added
to the quirks list.
The parameter description has a note encouraging users to report
their device so it can be added to the quirks list, inspired by a
similar request in parameter descriptions of the ideapad-laptop module.
The module parameter can be set to "1" to explicitly enable it,
"0" to disable it even on devices that are assumed to be affected,
or -1 (the default) to enable it if the device is assumed to be affected
(according to fwbug_list[])
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221383
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-4-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some IdeaPad Slim 3 devices and similar with AMD CPUs have a
nonfunctional keyboard and lid switch after s2idle.
It helps to delay suspend by 2.5 seconds so the EC has some time
to do whatever it needs to get done before suspend - unfortunately
at least on my 16ABR8 waking it with a timer (wakealarm) still
triggers the issue, but at least normal resume via keypress or
lid works fine. On the 14ARP10 wakealarm has been reported to also
work fine with this patch.
This issue has been reported for many different devices, this patch
has been tested with the Zen3-based IdeaPad Slim 3 16ABR8 (82XR)
and the Zen3+-based IdeaPad Slim 3 14ARP10 (83K6) and IdeaPad Slim 3
15ARP10 (83MM).
Reported-by: Sindre Henriksen <sindrehenriksen93@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221383
Tested-by: Sindre Henriksen <sindrehenriksen93@gmail.com>
Suggested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-3-daniel@gibson.sh
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Refactor code introduced by commit 9f5595d5f0 ("pmc: Require at
least 2.5 seconds between HW sleep cycles") to allow adding different
conditions for that delay in an upcoming change.
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-2-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The 1Ah M80H SoC uses a different set of SMU mailbox register offsets
compared to the existing 1Ah variants: message at 0xA10, argument at
0xA18, and response at 0xA14.
Add amd_1ah_m80_cpu_info with these offsets, wire it into the PCI ID
table via PCI_DEVICE_DATA(), populate scratch_reg field with
AMD_PMC_SCRATCH_REG_1AH and add the corresponding ACPI ID AMDI000C.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609143952.2999707-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace the scattered per-field assignments in amd_pmc_get_ip_info() with
a single amd_pmc_cpu_info struct capturing all SoC-specific parameters
such as SMU offsets, IP block table, and OS hint.
Define static const instances per SoC variant and embed them as driver_data
in the PCI ID table via PCI_DEVICE_DATA(). Consolidate pci_match_id() into
amd_pmc_set_cpu_info(), which assigns driver_data directly to cpu_info,
the switch falls through only for 1Ah M20H/M60H variants requiring
boot_cpu_data.x86_model detection to distinguish the M70 sub-variant.
Add scratch_reg to amd_pmc_cpu_info and populate it for each SoC
variant, allowing amd_pmc_idlemask_read() to drop its cpu_id switch
in favour of a single cpu_info->scratch_reg lookup.
Move dev->cpu_id assignment into amd_pmc_set_cpu_info() so it is valid
before the switch statement. Handle SP/SHP directly in the switch since
their NULL driver_data bypasses the early return, and remove the duplicate
check from probe.
Remove amd_pmc_get_os_hint() and use cpu_info->os_hint directly at call
sites and rename AMD_CPU_ID_* to PCI_DEVICE_ID_AMD_CPU_ID_* with backward
compatibility aliases.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609143952.2999707-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This platform is a similar vintage of platforms that had a BIOS bug
leading to a 10s delay at resume from s0i3.
Add a quirk for it.
Reported-by: Imrane <ihalim.me@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221273
Tested-by: Imrane <ihalim.me@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260324211647.357924-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The MECHREVO Wujie 15X Pro suffers from spurious IRQ issues related to
the AMD PMC. Add it to the quirk list to use the spurious_8042 fix.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-4-550230171hxy@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo Legion Go 2 takes a long time to resume from suspend.
This is due to it having an nvme resume handler that interferes
with IOMMU mappings. It is a common issue with older Lenovo
laptops. Adding it to that quirk list fixes this issue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4618
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251008135057.731928-1-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Xbox Ally features a Van Gogh SoC that has spurious interrupts
during resume. We get the following logs:
atkbd_receive_byte: 20 callbacks suppressed
atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
So, add the spurious_8042 quirk for it. It does not have a keyboard, so
this does not result in any functional loss.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251024152152.3981721-3-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ROG Xbox Ally (non-X) SoC features a similar architecture to the
Steam Deck. While the Steam Deck supports S3 (s2idle causes a crash),
this support was dropped by the Xbox Ally which only S0ix suspend.
Since the handler is missing here, this causes the device to not suspend
and the AMD GPU driver to crash while trying to resume afterwards due to
a power hang.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251024152152.3981721-2-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Prevents instant wakeup ~1s after suspend.
It seems to be kernel/system dependent if the IRQ actually manages to wake
the system every time or if it gets ignored (and everything works as
expected).
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250827131424.16436-1-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Chris reported that even on a BIOS that has a new enough SMU F/W
version there is still a spurious IRQ1. Although the solution was
added to SMU F/W 64.66.0 it turns out there needs to be a matching
SBIOS change to activate it. Thus Linux shouldn't be avoiding the
IRQ1 workaround on newer SMU F/W because there is no indication the
BIOS change is in place.
Drop the match for 64.66.0+ and instead match all RN/CZN/BRC (they
all share same SMU F/W). Adjust the quirk infrastructure to allow
quirking the workaround on or off and also adjust existing quirks
to match properly.
Unfortunately this may cause some systems that did have the SBIOS
change in place to regress in keyboard wakeup but we don't have a
way to know. If a user reports a keyboard wakeup regression they can
run with amd_pmc.disable_workarounds=1 to deactivate the workaround
and share DMI data so that their system can be quirked not to use
the workaround in the upstream kernel.
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4449
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250724185156.1827592-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo Yoga 6 13ACL6 82ND has a similar BIOS problem as other Lenovo
laptops from that vintage that causes a rather long resume from suspend.
Add it to the quirk list that manipulates the scratch register to avoid
the issue.
Reported-by: Adam Berglund <adam.f.berglund@hotmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4434
Tested-by: Adam Berglund <adam.f.berglund@hotmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250718172307.1928744-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A new header fch.h was created to store registers used by different AMD
drivers. This header was included by i2c-piix4 in
commit 624b0d5696 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH
definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86
archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82a
("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
This was not a good decision because loongarch and mips both actually
support i2c-piix4 and set it enabled in the defconfig.
Move the header to a location accessible by all architectures.
Fixes: 624b0d5696 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>")
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every other s2idle cycle fails to reach hardware sleep when keyboard
wakeup is enabled. This appears to be an EC bug, but the vendor
refuses to fix it.
It was confirmed that turning off i8042 wakeup avoids ths issue
(albeit keyboard wakeup is disabled). Take the lesser of two evils
and add it to the i8042 quirk list.
Reported-by: Raoul <ein4rth@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220116
Tested-by: Raoul <ein4rth@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250611203341.3733478-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The area of memory that contains the metrics table may contain garbage
when the cycle starts. This normally doesn't matter because the cycle
itself will populate it with valid data, however commit 9f5595d5f0
("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep
cycles") started to use it during the check() phase. Depending upon
what garbage is in the table it's possible that the system will wait
2.5 seconds for even the first cycle, which will be visible to a user.
To prevent this from happening explicitly clear the table when logging
is started.
Fixes: 9f5595d5f0 ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250603132412.3555302-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgqSbkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGr6sH/1ICAvlin1GuxffE
ISVNz3xhXQpXG2k8yl9r0umpdCfPQbGrxm30vZyuIDNutY/FuMvkIqfu+Z1NnLg0
GidZW015LtXrp7/puKtTnUD5CPSjdETMXig+Q7c1PrxkkmHwz8sBbbm173AIDbDB
t7wwqSEUQh2AIDouGwN+DXB+6bR2FoOXb/k/njmtappIwR3rBc2f1HQJnP095rKO
5AKw1c9DMv5Wq2cEdBOCP48e4CFZEIN1ycW0nvtjpnOmcPOJjLoEothRbntQolqF
udtj5UeTGdAJqmjigv7KHmlrmFNe+GqBq4+beHl5MRxhBaT2uGGaM9jCJiSxT3Jx
sHyYYr8=
=Ddma
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc7' into x86/core, to pick up fixes
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MECHREVO Wujie 14XA (GX4HRXL) wakes up immediately after s2idle entry.
This happens regardless of whether the laptop is plugged into AC power,
or whether any peripheral is plugged into the laptop.
Similar to commit a55bdad5df ("platform/x86/amd/pmc: Disable keyboard
wakeup on AMD Framework 13"), the MECHREVO Wujie 14XA wakes up almost
instantly after s2idle suspend entry (IRQ1 is the keyboard):
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 9
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 1
Add this model to the spurious_8042 quirk to workaround this.
This patch does not affect the wake-up function of the built-in keyboard.
Because the firmware of this machine adds an insurance for keyboard
wake-up events, as it always triggers an additional IRQ 9 to wake up the
system.
Suggested-by: Mingcong Bai <jeffbai@aosc.io>
Suggested-by: Xinhui Yang <cyan@cyano.uk>
Suggested-by: Rong Zhang <i@rong.moe>
Fixes: a55bdad5df ("platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4166
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://zhuanldan.zhihu.com/p/730538041
Tested-by: Yemu Lu <prcups@krgm.moe>
Signed-off-by: Runhua He <hua@aosc.io>
Link: https://lore.kernel.org/r/20250507100103.995395-1-hua@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The s2idle MMIO quirk uses a scratch register in the FCH.
Adjust the code to clarify that.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20250422234830.2840784-5-superm1@kernel.org
When an APU exits HW sleep with no active wake sources the Linux kernel will
rapidly assert that the APU can enter back into HW sleep. This happens in a
few ms. Contrasting this to Windows, Windows can take 10s of seconds to
enter back into the resiliency phase for Modern Standby.
For some situations this can be problematic because it can cause leakage
from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical
design guide specifications. On some designs this will trip the over
voltage protection feature (OVP) of the voltage regulator module, but it
could cause APU damage as well.
To prevent this risk, add an explicit sleep call so that future attempts
to enter into HW sleep will have enough time to settle. This will occur
while the screen is dark and only on cases that the APU should enter HW
sleep again, so it shouldn't be noticeable to any user.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250414162446.3853194-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Call pci_dev_put(rdev) before returning.
Fixes: 6ad1b2dc0f ("platform/x86/amd/pmc: Use managed APIs for mutex")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/65e2fffb-a1cb-4297-b725-661d6b790a05@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enhance code readability by fixing line break and blank line
inconsistencies.
Also make the return variable "rc" as function level local.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To improve the code organization and readability, move the macros and
structures from the AMD PMC driver to the PMC header file.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some of the AMD platforms do not support modern standby, so when such
CPU ID is detected, a warning message will be displayed to the user.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The `objs` suffix is reserved for user-space tools. Use the `y` suffix
instead, which is usually used for kernel drivers.
While at it, fix alignment in AMD PMC and PMF Makefiles.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250218194113.26589-3-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile
with WMI calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
- ACPI: platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers
concurrently to avoid the need to quirk which handler takes
precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside
the pre-defined profile
- Abstract and layer platform_profile API better using the
class_dev and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
- amd/hsmp: Add support for HSMP protocol v7
- amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
- amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
- dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and
XPS 9550
- Support probing accelerometer for models yet to be listed in
the DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might
be dangerous)
- HID: amd_sfh: Add support for exporting SRA sensor data
- hp-wmi: Add fan and thermal support for Victus 16-s1000
- input: Add key for phone linking
- input: i8042: Add context for the i8042 filter to enable cleaning up
the filter related global variables from pdx86 drivers
- lenovo-wmi-camera: Use SW_CAMERA_LENS_COVER instead of
KEY_CAMERA_ACCESS
- mellanox: mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
- thinkpad_acpi: Add support for phone link key
- tools/power/x86/intel-speed-select: Fix Turbo Ratio Limit restore
- x86-android-tables: Add support for Vexia EDU ATLA 10 Bluetooth and
EC battery driver
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- add support for Acer Nitro AN515-58
- Add support for Acer PH14-51
- Add support for Acer Predator PH16-72
- Fix initialization of last_non_turbo_profile
- Ignore AC events
- Implement proper hwmon support
- Improve error handling when reading gaming system information
- Rename ACER_CAP_FAN_SPEED_READ
- simplify platform profile cycling
- use an ACPI bitmap to set the platform profile choices
- Use devm_platform_profile_register()
- use new helper function for setting overclocks
- use WMI calls for platform profile handling
ACPI: platform-profile:
- Add a name member to handlers
ACPI: platform_profile:
- Add a prefix to log messages
- Add choices attribute for class interface
- Add concept of a "custom" profile
- Add device pointer into platform profile handler
- Add devm_platform_profile_register()
- Add documentation
- Add name attribute to class interface
- Add `ops` member to handlers
- Add platform handler argument to platform_profile_remove()
- Add `probe` to platform_profile_ops
- Add profile attribute for class interface
- Allow multiple handlers
- Check all profile handler to calculate next
- Clean platform_profile_handler
- Create class for ACPI platform profile
- Let drivers set drvdata to the class device
- Make sure all profile handlers agree on profile
- Move matching string for new profile out of mutex
- Move platform_profile_handler
- Move sanity check out of the mutex
- Notify change events on register and unregister
- Notify class device from platform_profile_notify()
- Only show profiles common for all handlers
- Pass the profile handler into platform_profile_notify()
- Remove platform_profile_handler from callbacks
- Remove platform_profile_handler from exported symbols
- Replace *class_dev member with class_dev
- Use guard(mutex) for register/unregister
- Use `scoped_cond_guard`
alienware_wmi:
- General cleanup of WMAX methods
alienware-wmi:
- Improve hdmi_mux, amplifier and deepslp group creation
- Improve rgb-zones group creation
- Modify parse_rgb() signature
- Move Lighting Control State
- Remove unnecessary check at module exit
- Use devm_platform_profile_register()
amd/hsmp:
- Add support for HSMP protocol version 7 messages
- Constify 'struct bin_attribute'
amd/pmc:
- Add STB support for AMD Desktop variants
- Define enum for S2D/PMC msg_port and add helper function
- Isolate STB code changes to a new file
- Move STB block into amd_pmc_s2d_init()
- Move STB functionality to a new file for better code organization
- Update function names to align with new STB file
- Update IP information structure for newer SoCs
- Update S2D message id for 1Ah Family 70h model
- Use ARRAY_SIZE() to fill num_ips information
amd: pmc:
- Use guard(mutex)
amd: pmf:
- Drop all quirks
amd/pmf:
- Enable Custom BIOS Inputs for PMF-TA
- Get SRA sensor data from AMD SFH driver
amd: pmf: sps:
- Use devm_platform_profile_register()
amd: pmf:
- Switch to guard(mutex)
asus-wmi:
- Use devm_platform_profile_register()
dell: dcdbas:
- Constify 'struct bin_attribute'
dell: dell-pc:
- Create platform device
dell-pc:
- Use devm_platform_profile_register()
dell_rbu:
- Constify 'struct bin_attribute'
dell-smo8800:
- Add a couple more models to lis3lv02d_devices[]
- Add support for probing for the accelerometer i2c address
- Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- Move SMO88xx acpi_device_ids to dell-smo8800-ids.h
dell-sysman:
- Directly use firmware_attributes_class
dell-uart-backlight:
- Use blacklight power constant
docs: platform/x86: wmi:
- mention tool for invoking WMI methods
Documentation/ABI:
- Add document for Mellanox PMC driver
- Add new sysfs field to sysfs-platform-mellanox-pmc
Documentation:
- Add documentation about class interface for platform profiles
firmware_attributes_class:
- Drop lifecycle functions
- Move include linux/device/class.h
- Simplify API
fujitsu-laptop:
- replace strcpy -> strscpy
HID: amd_sfh:
- Add support to export device operating states
hp-bioscfg:
- Directly use firmware_attributes_class
hp-wmi:
- Add fan and thermal profile support for Victus 16-s1000
- Use devm_platform_profile_register()
ideapad-laptop:
- Use devm_platform_profile_register()
Input:
- allocate keycode for phone linking
- i8042 - Add support for platform filter contexts
inspur_platform_profile:
- Use devm_platform_profile_register()
int3472:
- Check for adev == NULL
- Debug log the sensor name
- Fix skl_int3472_handle_gpio_resources() return value
- Make "pin number mismatch" message a debug message
intel: bytcrc_pwrsrc:
- fix power_supply dependency
- Optionally register a power_supply dev
intel: int0002_vgpio:
- Make the irqchip immutable
intel/pmt:
- Constify 'struct bin_attribute'
intel: punit_ipc:
- Remove unused function
intel/sdsi:
- Constify 'struct bin_attribute'
intel/tpmi/plr:
- Make char[] longer to silence warning
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACESS
MAINTAINERS:
- Change AMD PMC driver status to "Supported"
mlxbf-bootctl:
- Constify 'struct bin_attribute'
- use sysfs_emit() instead of sprintf()
mlxbf-pmc:
- Add support for clock_measure performance block
- Add support for monitoring cycle count
- incorrect type in assignment
mlxreg-hotplug:
- use sysfs_emit() instead of sprintf()
mlxreg-io:
- use sysfs_emit() instead of sprintf()
quickstart:
- don't include 'pm_wakeup.h' directly
serdev_helpers:
- Add get_serdev_controller_from_parent() helper
- Check for serial_ctrl_uid == NULL
surface: surface_platform_profile:
- Use devm_platform_profile_register()
think-lmi:
- Directly use firmware_attributes_class
thinkpad_acpi:
- Add support for new phone link hotkey
thinkpad-acpi:
- replace strcpy with strscpy
thinkpad_acpi:
- Use devm_platform_profile_register()
tools/power/x86/intel-speed-select:
- Fix TRL restore after SST-TF disable
- v1.21 release
wmi-bmof:
- Make use of .bin_size() callback
x86-android-tablets:
- Add Bluetooth support for Vexia EDU ATLA 10
- Add missing __init to get_i2c_adap_by_*()
- Add support for getting serdev-controller by PCI parent
- Add Vexia EDU ATLA 10 EC battery driver
- Change x86_instantiate_serdev() prototype
- make platform data be static
- Make variables only used locally static
- Store serdev-controller ACPI HID + UID in a union
Merges:
- Merge branch 'fixes' into 'for-next'
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge import NS conversion from 'https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ5JDNAAKCRBZrE9hU+XO
MT3AAP9YSYaWZUEgV9T/De2C/ksx0XfmHULmtQHccMgqIsIxmAEAmsBOHsDozPuZ
9F2IbT4uBuQo2iwbGq0DhVd+N36kEQw=
=Vz0C
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
which is legacy now, and the creation of the new AMD node concept which
represents the Zen architecture of having a collection of I/O devices within
an SoC. Those nodes comprise the so-called data fabric on Zen. This has
at least one practical advantage of not having to add a PCI ID each time
a new data fabric PCI device releases. Eventually, the lot more uniform
provider of data fabric functionality amd_node.c will be used by all the
drivers which need it
- Smaller cleanups
-----BEGIN PGP SIGNATURE-----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=ZAjD
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- The first part of a restructuring of AMD's representation of a
northbridge which is legacy now, and the creation of the new AMD node
concept which represents the Zen architecture of having a collection
of I/O devices within an SoC. Those nodes comprise the so-called data
fabric on Zen.
This has at least one practical advantage of not having to add a PCI
ID each time a new data fabric PCI device releases. Eventually, the
lot more uniform provider of data fabric functionality amd_node.c
will be used by all the drivers which need it
- Smaller cleanups
* tag 'x86_misc_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_node: Use defines for SMN register offsets
x86/amd_node: Remove dependency on AMD_NB
x86/amd_node: Update __amd_smn_rw() error paths
x86/amd_nb: Move SMN access code to a new amd_node driver
x86/amd_nb, hwmon: (k10temp): Simplify amd_pci_dev_to_node_id()
x86/amd_nb: Simplify function 3 search
x86/amd_nb: Use topology info to get AMD node count
x86/amd_nb: Simplify root device search
x86/amd_nb: Simplify function 4 search
x86: Start moving AMD node functionality out of AMD_NB
x86/amd_nb: Clean up early_is_amd_nb()
x86/amd_nb: Restrict init function to AMD-based systems
x86/mtrr: Rename mtrr_overwrite_state() to guest_force_mtrr_state()
