mirror of
https://github.com/torvalds/linux.git
synced 2026-05-30 10:04:04 +02:00
master
258 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Chuck Lever
|
9015985b5e |
nvme-tcp: store negative errno in queue->tls_err
nvme_tcp_tls_done() assigns queue->tls_err in three branches. The
ENOKEY lookup failure and the EOPNOTSUPP initializer both store
negative errnos. The third branch, reached when the handshake
layer reports a non-zero status, stores -status.
The handshake layer delivers status to the consumer callback as a
negative errno; the other in-tree consumers --
xs_tls_handshake_done() and the nvmet target callback -- treat
their status argument that way. The extra negation in
nvme_tcp_tls_done() flips the sign, leaving tls_err as a positive
value (for instance, +EIO), which nvme_tcp_start_tls() then
returns to its caller.
Drop the extra negation so queue->tls_err uniformly carries a
negative errno on failure.
Fixes:
|
||
|
Chaitanya Kulkarni
|
26bb12b9ca |
nvme-tcp: teardown circular locking fixes
When a controller reset is triggered via sysfs (by writing to
/sys/class/nvme/<nvmedev>/reset_controller), the reset work tears down
and re-establishes all queues. The socket release using fput() defers
the actual cleanup to task_work delayed_fput workqueue. This deferred
cleanup can race with the subsequent queue re-allocation during reset,
potentially leading to use-after-free or resource conflicts.
Replace fput() with __fput_sync() to ensure synchronous socket release,
guaranteeing that all socket resources are fully cleaned up before the
function returns. This prevents races during controller reset where
new queue setup may begin before the old socket is fully released.
* Call chain during reset:
nvme_reset_ctrl_work()
-> nvme_tcp_teardown_ctrl()
-> nvme_tcp_teardown_io_queues()
-> nvme_tcp_free_io_queues()
-> nvme_tcp_free_queue() <-- fput() -> __fput_sync()
-> nvme_tcp_teardown_admin_queue()
-> nvme_tcp_free_admin_queue()
-> nvme_tcp_free_queue() <-- fput() -> __fput_sync()
-> nvme_tcp_setup_ctrl() <-- race with deferred fput
memalloc_noreclaim_save() sets PF_MEMALLOC which is intended for tasks
performing memory reclaim work that need reserve access. While PF_MEMALLOC
prevents the task from entering direct reclaim (causing __need_reclaim() to
return false), it does not strip __GFP_IO from gfp flags. The allocator can
therefore still trigger writeback I/O when __GFP_IO remains set, which is
unsafe when the caller holds block layer locks.
Switch to memalloc_noio_save() which sets PF_MEMALLOC_NOIO. This causes
current_gfp_context() to strip __GFP_IO|__GFP_FS from every allocation in
the scope, making it safe to allocate memory while holding elevator_lock and
set->srcu.
* The issue can be reproduced using blktests:
nvme_trtype=tcp ./check nvme/005
blktests (master) # nvme_trtype=tcp ./check nvme/005
nvme/005 (tr=tcp) (reset local loopback target) [failed]
runtime 0.725s ... 0.798s
something found in dmesg:
[ 108.473940] run blktests nvme/005 at 2025-11-22 16:12:20
[...]
...
(See '/root/blktests/results/nodev_tr_tcp/nvme/005.dmesg' for the entire message)
blktests (master) # cat /root/blktests/results/nodev_tr_tcp/nvme/005.dmesg
[ 108.473940] run blktests nvme/005 at 2025-11-22 16:12:20
[ 108.526983] loop0: detected capacity change from 0 to 2097152
[ 108.555606] nvmet: adding nsid 1 to subsystem blktests-subsystem-1
[ 108.572531] nvmet_tcp: enabling port 0 (127.0.0.1:4420)
[ 108.613061] nvmet: Created nvm controller 1 for subsystem blktests-subsystem-1 for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349.
[ 108.616832] nvme nvme0: creating 48 I/O queues.
[ 108.630791] nvme nvme0: mapped 48/0/0 default/read/poll queues.
[ 108.661892] nvme nvme0: new ctrl: NQN "blktests-subsystem-1", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349
[ 108.746639] nvmet: Created nvm controller 2 for subsystem blktests-subsystem-1 for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349.
[ 108.748466] nvme nvme0: creating 48 I/O queues.
[ 108.802984] nvme nvme0: mapped 48/0/0 default/read/poll queues.
[ 108.829983] nvme nvme0: Removing ctrl: NQN "blktests-subsystem-1"
[ 108.854288] block nvme0n1: no available path - failing I/O
[ 108.854344] block nvme0n1: no available path - failing I/O
[ 108.854373] Buffer I/O error on dev nvme0n1, logical block 1, async page read
[ 108.891693] ======================================================
[ 108.895912] WARNING: possible circular locking dependency detected
[ 108.900184] 6.17.0nvme+ #3 Tainted: G N
[ 108.903913] ------------------------------------------------------
[ 108.908171] nvme/2734 is trying to acquire lock:
[ 108.911957] ffff88810210e610 (set->srcu){.+.+}-{0:0}, at: __synchronize_srcu+0x17/0x170
[ 108.917587]
but task is already holding lock:
[ 108.921570] ffff88813abea198 (&q->elevator_lock){+.+.}-{4:4}, at: elevator_change+0xa8/0x1c0
[ 108.927361]
which lock already depends on the new lock.
[ 108.933018]
the existing dependency chain (in reverse order) is:
[ 108.938223]
-> #4 (&q->elevator_lock){+.+.}-{4:4}:
[ 108.942988] __mutex_lock+0xa2/0x1150
[ 108.945873] elevator_change+0xa8/0x1c0
[ 108.948925] elv_iosched_store+0xdf/0x140
[ 108.952043] kernfs_fop_write_iter+0x16a/0x220
[ 108.955367] vfs_write+0x378/0x520
[ 108.957598] ksys_write+0x67/0xe0
[ 108.959721] do_syscall_64+0x76/0xbb0
[ 108.962052] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 108.965145]
-> #3 (&q->q_usage_counter(io)){++++}-{0:0}:
[ 108.968923] blk_alloc_queue+0x30e/0x350
[ 108.972117] blk_mq_alloc_queue+0x61/0xd0
[ 108.974677] scsi_alloc_sdev+0x2a0/0x3e0
[ 108.977092] scsi_probe_and_add_lun+0x1bd/0x430
[ 108.979921] __scsi_add_device+0x109/0x120
[ 108.982504] ata_scsi_scan_host+0x97/0x1c0
[ 108.984365] async_run_entry_fn+0x2d/0x130
[ 108.986109] process_one_work+0x20e/0x630
[ 108.987830] worker_thread+0x184/0x330
[ 108.989473] kthread+0x10a/0x250
[ 108.990852] ret_from_fork+0x297/0x300
[ 108.992491] ret_from_fork_asm+0x1a/0x30
[ 108.994159]
-> #2 (fs_reclaim){+.+.}-{0:0}:
[ 108.996320] fs_reclaim_acquire+0x99/0xd0
[ 108.998058] kmem_cache_alloc_node_noprof+0x4e/0x3c0
[ 109.000123] __alloc_skb+0x15f/0x190
[ 109.002195] tcp_send_active_reset+0x3f/0x1e0
[ 109.004038] tcp_disconnect+0x50b/0x720
[ 109.005695] __tcp_close+0x2b8/0x4b0
[ 109.007227] tcp_close+0x20/0x80
[ 109.008663] inet_release+0x31/0x60
[ 109.010175] __sock_release+0x3a/0xc0
[ 109.011778] sock_close+0x14/0x20
[ 109.013263] __fput+0xee/0x2c0
[ 109.014673] delayed_fput+0x31/0x50
[ 109.016183] process_one_work+0x20e/0x630
[ 109.017897] worker_thread+0x184/0x330
[ 109.019543] kthread+0x10a/0x250
[ 109.020929] ret_from_fork+0x297/0x300
[ 109.022565] ret_from_fork_asm+0x1a/0x30
[ 109.024194]
-> #1 (sk_lock-AF_INET-NVME){+.+.}-{0:0}:
[ 109.026634] lock_sock_nested+0x2e/0x70
[ 109.028251] tcp_sendmsg+0x1a/0x40
[ 109.029783] sock_sendmsg+0xed/0x110
[ 109.031321] nvme_tcp_try_send_cmd_pdu+0x13e/0x260 [nvme_tcp]
[ 109.034263] nvme_tcp_try_send+0xb3/0x330 [nvme_tcp]
[ 109.036375] nvme_tcp_queue_rq+0x342/0x3d0 [nvme_tcp]
[ 109.038528] blk_mq_dispatch_rq_list+0x297/0x800
[ 109.040448] __blk_mq_sched_dispatch_requests+0x3db/0x5f0
[ 109.042677] blk_mq_sched_dispatch_requests+0x29/0x70
[ 109.044787] blk_mq_run_work_fn+0x76/0x1b0
[ 109.046535] process_one_work+0x20e/0x630
[ 109.048245] worker_thread+0x184/0x330
[ 109.049890] kthread+0x10a/0x250
[ 109.051331] ret_from_fork+0x297/0x300
[ 109.053024] ret_from_fork_asm+0x1a/0x30
[ 109.054740]
-> #0 (set->srcu){.+.+}-{0:0}:
[ 109.056850] __lock_acquire+0x1468/0x2210
[ 109.058614] lock_sync+0xa5/0x110
[ 109.060048] __synchronize_srcu+0x49/0x170
[ 109.061802] elevator_switch+0xc9/0x330
[ 109.063950] elevator_change+0x128/0x1c0
[ 109.065675] elevator_set_none+0x4c/0x90
[ 109.067316] blk_unregister_queue+0xa8/0x110
[ 109.069165] __del_gendisk+0x14e/0x3c0
[ 109.070824] del_gendisk+0x75/0xa0
[ 109.072328] nvme_ns_remove+0xf2/0x230 [nvme_core]
[ 109.074365] nvme_remove_namespaces+0xf2/0x150 [nvme_core]
[ 109.076652] nvme_do_delete_ctrl+0x71/0x90 [nvme_core]
[ 109.078775] nvme_delete_ctrl_sync+0x3b/0x50 [nvme_core]
[ 109.081009] nvme_sysfs_delete+0x34/0x40 [nvme_core]
[ 109.083082] kernfs_fop_write_iter+0x16a/0x220
[ 109.085009] vfs_write+0x378/0x520
[ 109.086539] ksys_write+0x67/0xe0
[ 109.087982] do_syscall_64+0x76/0xbb0
[ 109.089577] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 109.091665]
other info that might help us debug this:
[ 109.095478] Chain exists of:
set->srcu --> &q->q_usage_counter(io) --> &q->elevator_lock
[ 109.099544] Possible unsafe locking scenario:
[ 109.101708] CPU0 CPU1
[ 109.103402] ---- ----
[ 109.105103] lock(&q->elevator_lock);
[ 109.106530] lock(&q->q_usage_counter(io));
[ 109.109022] lock(&q->elevator_lock);
[ 109.111391] sync(set->srcu);
[ 109.112586]
*** DEADLOCK ***
[ 109.114772] 5 locks held by nvme/2734:
[ 109.116189] #0: ffff888101925410 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0x67/0xe0
[ 109.119143] #1: ffff88817a914e88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x10f/0x220
[ 109.123141] #2: ffff8881046313f8 (kn->active#185){++++}-{0:0}, at: sysfs_remove_file_self+0x26/0x50
[ 109.126543] #3: ffff88810470e1d0 (&set->update_nr_hwq_lock){++++}-{4:4}, at: del_gendisk+0x6d/0xa0
[ 109.129891] #4: ffff88813abea198 (&q->elevator_lock){+.+.}-{4:4}, at: elevator_change+0xa8/0x1c0
[ 109.133149]
stack backtrace:
[ 109.134817] CPU: 6 UID: 0 PID: 2734 Comm: nvme Tainted: G N 6.17.0nvme+ #3 PREEMPT(voluntary)
[ 109.134819] Tainted: [N]=TEST
[ 109.134820] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 109.134821] Call Trace:
[ 109.134823] <TASK>
[ 109.134824] dump_stack_lvl+0x75/0xb0
[ 109.134828] print_circular_bug+0x26a/0x330
[ 109.134831] check_noncircular+0x12f/0x150
[ 109.134834] __lock_acquire+0x1468/0x2210
[ 109.134837] ? __synchronize_srcu+0x17/0x170
[ 109.134838] lock_sync+0xa5/0x110
[ 109.134840] ? __synchronize_srcu+0x17/0x170
[ 109.134842] __synchronize_srcu+0x49/0x170
[ 109.134843] ? mark_held_locks+0x49/0x80
[ 109.134845] ? _raw_spin_unlock_irqrestore+0x2d/0x60
[ 109.134847] ? kvm_clock_get_cycles+0x14/0x30
[ 109.134853] ? ktime_get_mono_fast_ns+0x36/0xb0
[ 109.134858] elevator_switch+0xc9/0x330
[ 109.134860] elevator_change+0x128/0x1c0
[ 109.134862] ? kernfs_put.part.0+0x86/0x290
[ 109.134864] elevator_set_none+0x4c/0x90
[ 109.134866] blk_unregister_queue+0xa8/0x110
[ 109.134868] __del_gendisk+0x14e/0x3c0
[ 109.134870] del_gendisk+0x75/0xa0
[ 109.134872] nvme_ns_remove+0xf2/0x230 [nvme_core]
[ 109.134879] nvme_remove_namespaces+0xf2/0x150 [nvme_core]
[ 109.134887] nvme_do_delete_ctrl+0x71/0x90 [nvme_core]
[ 109.134893] nvme_delete_ctrl_sync+0x3b/0x50 [nvme_core]
[ 109.134899] nvme_sysfs_delete+0x34/0x40 [nvme_core]
[ 109.134905] kernfs_fop_write_iter+0x16a/0x220
[ 109.134908] vfs_write+0x378/0x520
[ 109.134911] ksys_write+0x67/0xe0
[ 109.134913] do_syscall_64+0x76/0xbb0
[ 109.134915] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 109.134916] RIP: 0033:0x7fd68a737317
[ 109.134917] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 109.134919] RSP: 002b:00007ffded1546d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 109.134920] RAX: ffffffffffffffda RBX: 000000000054f7e0 RCX: 00007fd68a737317
[ 109.134921] RDX: 0000000000000001 RSI: 00007fd68a855719 RDI: 0000000000000003
[ 109.134921] RBP: 0000000000000003 R08: 0000000030407850 R09: 00007fd68a7cd4e0
[ 109.134922] R10: 00007fd68a65b130 R11: 0000000000000246 R12: 00007fd68a855719
[ 109.134923] R13: 00000000304074c0 R14: 00000000304074c0 R15: 0000000030408660
[ 109.134926] </TASK>
[ 109.962756] Key type psk unregistered
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
||
|
Geliang Tang
|
723277b15e |
nvme: add missing MODULE_ALIAS for fabrics transports
The generic fabrics layer uses request_module("nvme-%s", opts->transport)
to auto-load transport modules. Currently, the nvme-tcp, nvme-rdma, and
nvme-fc modules lack MODULE_ALIAS entries for these names, which prevents
the kernel from automatically finding and loading them when requested.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
||
|
Linus Torvalds
|
a028739a43 |
block-7.0-20260305
-----BEGIN PGP SIGNATURE-----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=NNcQ
-----END PGP SIGNATURE-----
Merge tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Improve quirk visibility and configurability (Maurizio)
- Fix runtime user modification to queue setup (Keith)
- Fix multipath leak on try_module_get failure (Keith)
- Ignore ambiguous spec definitions for better atomics support
(John)
- Fix admin queue leak on controller reset (Ming)
- Fix large allocation in persistent reservation read keys
(Sungwoo Kim)
- Fix fcloop callback handling (Justin)
- Securely free DHCHAP secrets (Daniel)
- Various cleanups and typo fixes (John, Wilfred)
- Avoid a circular lock dependency issue in the sysfs nr_requests or
scheduler store handling
- Fix a circular lock dependency with the pcpu mutex and the queue
freeze lock
- Cleanup for bio_copy_kern(), using __bio_add_page() rather than the
bio_add_page(), as adding a page here cannot fail. The exiting code
had broken cleanup for the error condition, so make it clear that the
error condition cannot happen
- Fix for a __this_cpu_read() in preemptible context splat
* tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: use trylock to avoid lockdep circular dependency in sysfs
nvme: fix memory allocation in nvme_pr_read_keys()
block: use __bio_add_page in bio_copy_kern
block: break pcpu_alloc_mutex dependency on freeze_lock
blktrace: fix __this_cpu_read/write in preemptible context
nvme-multipath: fix leak on try_module_get failure
nvmet-fcloop: Check remoteport port_state before calling done callback
nvme-pci: do not try to add queue maps at runtime
nvme-pci: cap queue creation to used queues
nvme-pci: ensure we're polling a polled queue
nvme: fix memory leak in quirks_param_set()
nvme: correct comment about nvme_ns_remove()
nvme: stop setting namespace gendisk device driver data
nvme: add support for dynamic quirk configuration via module parameter
nvme: fix admin queue leak on controller reset
nvme-fabrics: use kfree_sensitive() for DHCHAP secrets
nvme: stop using AWUPF
nvme: expose active quirks in sysfs
nvme/host: fixup some typos
|
||
|
Linus Torvalds
|
32a92f8c89 |
Convert more 'alloc_obj' cases to default GFP_KERNEL arguments
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Wilfred Mallawa
|
f947d9e77b |
nvme/host: fixup some typos
Fix up some minor typos in the nvme host driver and a comment style to conform to the standard kernel style. Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Linus Torvalds
|
cc25df3e2e |
for-6.19/block-20251201
-----BEGIN PGP SIGNATURE-----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=m22w
-----END PGP SIGNATURE-----
Merge tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Fix head insertion for mq-deadline, a regression from when priority
support was added
- Series simplifying and improving the ublk user copy code
- Various ublk related cleanups
- Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
request is punted to a thread for handling
- Merge and then later revert loop dio nowait support, as it ended up
causing excessive stack usage for when the inline issue code needs to
dip back into the full file system code
- Improve auto integrity code, making it less deadlock prone
- Speedup polled IO handling, but manually managing the hctx lookups
- Fixes for blk-throttle for SSD devices
- Small series with fixes for the S390 dasd driver
- Add support for caching zones, avoiding unnecessary report zone
queries
- MD pull requests via Yu:
- fix null-ptr-dereference regression for dm-raid0
- fix IO hang for raid5 when array is broken with IO inflight
- remove legacy 1s delay to speed up system shutdown
- change maintainer's email address
- data can be lost if array is created with different lbs devices,
fix this problem and record lbs of the array in metadata
- fix rcu protection for md_thread
- fix mddev kobject lifetime regression
- enable atomic writes for md-linear
- some cleanups
- bcache updates via Coly
- remove useless discard and cache device code
- improve usage of per-cpu workqueues
- Reorganize the IO scheduler switching code, fixing some lockdep
reports as well
- Improve the block layer P2P DMA support
- Add support to the block tracing code for zoned devices
- Segment calculation improves, and memory alignment flexibility
improvements
- Set of prep and cleanups patches for ublk batching support. The
actual batching hasn't been added yet, but helps shrink down the
workload of getting that patchset ready for 6.20
- Fix for how the ps3 block driver handles segments offsets
- Improve how block plugging handles batch tag allocations
- nbd fixes for use-after-free of the configuration on device clear/put
- Set of improvements and fixes for zloop
- Add Damien as maintainer of the block zoned device code handling
- Various other fixes and cleanups
* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
block/rnbd: correct all kernel-doc complaints
blk-mq: use queue_hctx in blk_mq_map_queue_type
md: remove legacy 1s delay in md_notify_reboot
md/raid5: fix IO hang when array is broken with IO inflight
md: warn about updating super block failure
md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
sbitmap: fix all kernel-doc warnings
ublk: add helper of __ublk_fetch()
ublk: pass const pointer to ublk_queue_is_zoned()
ublk: refactor auto buffer register in ublk_dispatch_req()
ublk: add `union ublk_io_buf` with improved naming
ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
kfifo: add kfifo_alloc_node() helper for NUMA awareness
blk-mq: fix potential uaf for 'queue_hw_ctx'
blk-mq: use array manage hctx map instead of xarray
ublk: prevent invalid access with DEBUG
s390/dasd: Use scnprintf() instead of sprintf()
s390/dasd: Move device name formatting into separate function
s390/dasd: Remove unnecessary debugfs_create() return checks
s390/dasd: Fix gendisk parent after copy pair swap
...
|
||
|
Keith Busch
|
bc840b21a2 |
nvme: remove virtual boundary for sgl capable devices
The nvme virtual boundary is only required for the PRP format. Devices that can use SGL for DMA don't need it for IO queues. Drop reporting it for such devices; rdma fabrics controllers will continue to use the limit as they currently don't report any boundary requirements, but tcp and fc never needed it in the first place so they get to report no virtual boundary. Applications may continue to align to the same virtual boundaries for optimization purposes if they want, and the driver will continue to decide whether to use the PRP format the same as before if the IO allows it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Kees Cook
|
85cb0757d7 |
net: Convert proto_ops connect() callbacks to use sockaddr_unsized
Update all struct proto_ops connect() callback function prototypes from "struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the compiler about object sizes. Calls into struct proto handlers gain casts that will be removed in the struct proto conversion patch. No binary changes expected. Signed-off-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Kees Cook
|
0e50474fa5 |
net: Convert proto_ops bind() callbacks to use sockaddr_unsized
Update all struct proto_ops bind() callback function prototypes from "struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the compiler about object sizes. Calls into struct proto handlers gain casts that will be removed in the struct proto conversion patch. No binary changes expected. Signed-off-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Wilfred Mallawa
|
5a869d0177 |
nvme/tcp: handle tls partially sent records in write_space()
With TLS enabled, records that are encrypted and appended to TLS TX
list can fail to see a retry if the underlying TCP socket is busy, for
example, hitting an EAGAIN from tcp_sendmsg_locked(). This is not known
to the NVMe TCP driver, as the TLS layer successfully generated a record.
Typically, the TLS write_space() callback would ensure such records are
retried, but in the NVMe TCP Host driver, write_space() invokes
nvme_tcp_write_space(). This causes a partially sent record in the TLS TX
list to timeout after not being retried.
This patch fixes the above by calling queue->write_space(), which calls
into the TLS layer to retry any pending records.
Fixes:
|
||
|
Martin George
|
df4666a490 |
nvme-tcp: send only permitted commands for secure concat
In addition to sending permitted commands such as connect/auth
over the initial unencrypted admin connection as part of secure
channel concatenation, the host also sends commands such as
Property Get and Identify on the same. This is a spec violation
leading to secure concat failures. Fix this by ensuring these
additional commands are avoided on this connection.
Fixes:
|
||
|
Bjorn Helgaas
|
367c240b0a |
nvme: fix various comment typos
Fix typos in comments. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Maurizio Lombardi
|
5a58ac9bfc |
nvme-tcp: log TLS handshake failures at error level
Update the nvme_tcp_start_tls() function to use dev_err() instead of dev_dbg() when a TLS error is detected. This ensures that handshake failures are visible by default, aiding in debugging. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Linus Torvalds
|
6d8854216e |
block-6.16-20250606
-----BEGIN PGP SIGNATURE-----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=gs32
-----END PGP SIGNATURE-----
Merge tag 'block-6.16-20250606' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
|
||
|
Hannes Reinecke
|
f42d4796ee |
nvme-tcp: fix I/O stalls on congested sockets
When the socket is busy processing nvme_tcp_try_recv() might return -EAGAIN, but this doesn't automatically imply that the sending side is blocked, too. So check if there are pending requests once nvme_tcp_try_recv() returns -EAGAIN and continue with the sending loop to avoid I/O stalls. Signed-off-by: Hannes Reinecke <hare@kernel.org> Acked-by: Chris Leech <cleech@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Hannes Reinecke
|
0bf04c874f |
nvme-tcp: sanitize request list handling
Validate the request in nvme_tcp_handle_r2t() to ensure it's not part of any list, otherwise a malicious R2T PDU might inject a loop in request list processing. Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Shin'ichiro Kawasaki
|
e714370670 |
nvme-tcp: remove tag set when second admin queue config fails
Commit |
||
|
Linus Torvalds
|
1b98f357da |
Networking changes for 6.16.
Core
----
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing
again the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter
---------
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools
still use this interface.
- Implement support for wildcard netdevice in netdev basechain
and flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF
---
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols
---------
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the single
flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API
----------
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling
-----------------
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers
----------------------
- OpenVPN virtual driver: offload OpenVPN data channels processing
to the kernel-space, increasing the data transfer throughput WRT
the user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the stearing table handling to reduce significantly
the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=t/Tz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
||
|
Eric Biggers
|
427fff9aff |
nvme-tcp: use crc32c() and skb_copy_and_crc32c_datagram_iter()
Now that the crc32c() library function directly takes advantage of architecture-specific optimizations and there also now exists a function skb_copy_and_crc32c_datagram_iter(), it is unnecessary to go through the crypto_ahash API. Just use those functions. This is much simpler, and it also improves performance due to eliminating the crypto API overhead. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://patch.msgid.link/20250519175012.36581-10-ebiggers@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Hannes Reinecke
|
674f872b7c |
nvme-tcp: open-code nvme_tcp_queue_request() for R2T
When handling an R2T PDU we short-circuit nvme_tcp_queue_request() as we should not attempt to send consecutive PDUs. So open-code nvme_tcp_queue_request() for R2T and drop the last argument. Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> |
||
|
Hannes Reinecke
|
73becfd6d8 |
nvme-tcp: remove redundant check to ctrl->opts
When checking for secure concatenation we have already validated that 'ctrl->opts' is set, so we can remove this check. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Michael Liang
|
77e40bbce9 |
nvme-tcp: fix premature queue removal and I/O failover
This patch addresses a data corruption issue observed in nvme-tcp during
testing.
In an NVMe native multipath setup, when an I/O timeout occurs, all
inflight I/Os are canceled almost immediately after the kernel socket is
shut down. These canceled I/Os are reported as host path errors,
triggering a failover that succeeds on a different path.
However, at this point, the original I/O may still be outstanding in the
host's network transmission path (e.g., the NIC’s TX queue). From the
user-space app's perspective, the buffer associated with the I/O is
considered completed since they're acked on the different path and may
be reused for new I/O requests.
Because nvme-tcp enables zero-copy by default in the transmission path,
this can lead to corrupted data being sent to the original target,
ultimately causing data corruption.
We can reproduce this data corruption by injecting delay on one path and
triggering i/o timeout.
To prevent this issue, this change ensures that all inflight
transmissions are fully completed from host's perspective before
returning from queue stop. To handle concurrent I/O timeout from multiple
namespaces under the same controller, always wait in queue stop
regardless of queue's state.
This aligns with the behavior of queue stopping in other NVMe fabric
transports.
Fixes:
|
||
|
Kuniyuki Iwashima
|
b013b817f3 |
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
Commit |
||
|
Linus Torvalds
|
9b960d8cd6 |
for-6.15/block-20250322
-----BEGIN PGP SIGNATURE-----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=Ci5m
-----END PGP SIGNATURE-----
Merge tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
|
||
|
Peijie Shao
|
1be52169c3 |
nvme-tcp: fix selinux denied when calling sock_sendmsg
In a SELinux enabled kernel, socket_create() initializes the security label of the socket using the security label of the calling process, this typically works well. However, in a containerized environment like Kubernetes, problem arises when a privileged container(domain spc_t) connects to an NVMe target and mounts the NVMe as persistent storage for unprivileged containers(domain container_t). This is because the container_t domain cannot access resources labeled with spc_t, resulting in socket_sendmsg returning -EACCES. The solution is to use socket_create_kern() instead of socket_create(), which labels the socket context to kernel_t. Access control will then be handled by the VFS layer rather than the socket itself. Signed-off-by: Peijie Shao <shaopeijie@cestc.cn> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Hannes Reinecke
|
104d0e2f62 |
nvme-fabrics: reset admin connection for secure concatenation
When secure concatenation is requested the connection needs to be reset to enable TLS encryption on the new cnnection. That implies that the original connection used for the DH-CHAP negotiation really shouldn't be used, and we should reset as soon as the DH-CHAP negotiation has succeeded on the admin queue. Based on an idea from Sagi. Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Hannes Reinecke
|
e88a7595b5 |
nvme-tcp: request secure channel concatenation
Add a fabrics option 'concat' to request secure channel concatenation as specified the NVME Base Specification v2.1, section 8.3.4.3: Secure Channel Concatenation. When secure channel concatenation is enabled a 'generated PSK' is inserted into the keyring such that it's available after reset. Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Hannes Reinecke
|
62eb89323c |
nvme-keyring: add nvme_tls_psk_refresh()
Add a function to refresh a generated PSK in the specified keyring. Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Dan Carpenter
|
528361c499 |
nvme-tcp: fix signedness bug in nvme_tcp_init_connection()
The kernel_recvmsg() function returns an int which could be either
negative error codes or the number of bytes received. The problem is
that the condition:
if (ret < sizeof(*icresp)) {
is type promoted to type unsigned long and negative values are treated
as high positive values which is success, when they should be treated as
failure. Handle invalid positive returns separately from negative
error codes to avoid this problem.
Fixes:
|
||
|
Maurizio Lombardi
|
ad95bab0cd |
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme_tcp_recv_pdu() doesn't check the validity of the header length.
When header digests are enabled, a target might send a packet with an
invalid header length (e.g. 255), causing nvme_tcp_verify_hdgst()
to access memory outside the allocated area and cause memory corruptions
by overwriting it with the calculated digest.
Fix this by rejecting packets with an unexpected header length.
Fixes:
|
||
|
Maurizio Lombardi
|
afb41b08c4 |
nvme-tcp: Fix a C2HTermReq error message
In H2CTermReq, a FES with value 0x05 means "R2T Limit Exceeded"; but
in C2HTermReq the same value has a different meaning (Data Transfer Limit
Exceeded).
Fixes:
|
||
|
Sagi Grimberg
|
8c1624b63a |
nvme-tcp: fix possible UAF in nvme_tcp_poll
nvme_tcp_poll() may race with the send path error handler because it may complete the request while it is actively being polled for completion, resulting in a UAF panic [1]: We should make sure to stop polling when we see an error when trying to read from the socket. Hence make sure to propagate the error so that the block layer breaks the polling cycle. [1]: -- [35665.692310] nvme nvme2: failed to send request -13 [35665.702265] nvme nvme2: unsupported pdu type (3) [35665.702272] BUG: kernel NULL pointer dereference, address: 0000000000000000 [35665.702542] nvme nvme2: queue 1 receive failed: -22 [35665.703209] #PF: supervisor write access in kernel mode [35665.703213] #PF: error_code(0x0002) - not-present page [35665.703214] PGD 8000003801cce067 P4D 8000003801cce067 PUD 37e6f79067 PMD 0 [35665.703220] Oops: 0002 [#1] SMP PTI [35665.703658] nvme nvme2: starting error recovery [35665.705809] Hardware name: Inspur aaabbb/YZMB-00882-104, BIOS 4.1.26 09/22/2022 [35665.705812] Workqueue: kblockd blk_mq_requeue_work [35665.709172] RIP: 0010:_raw_spin_lock+0xc/0x30 [35665.715788] Call Trace: [35665.716201] <TASK> [35665.716613] ? show_trace_log_lvl+0x1c1/0x2d9 [35665.717049] ? show_trace_log_lvl+0x1c1/0x2d9 [35665.717457] ? blk_mq_request_bypass_insert+0x2c/0xb0 [35665.717950] ? __die_body.cold+0x8/0xd [35665.718361] ? page_fault_oops+0xac/0x140 [35665.718749] ? blk_mq_start_request+0x30/0xf0 [35665.719144] ? nvme_tcp_queue_rq+0xc7/0x170 [nvme_tcp] [35665.719547] ? exc_page_fault+0x62/0x130 [35665.719938] ? asm_exc_page_fault+0x22/0x30 [35665.720333] ? _raw_spin_lock+0xc/0x30 [35665.720723] blk_mq_request_bypass_insert+0x2c/0xb0 [35665.721101] blk_mq_requeue_work+0xa5/0x180 [35665.721451] process_one_work+0x1e8/0x390 [35665.721809] worker_thread+0x53/0x3d0 [35665.722159] ? process_one_work+0x390/0x390 [35665.722501] kthread+0x124/0x150 [35665.722849] ? set_kthread_struct+0x50/0x50 [35665.723182] ret_from_fork+0x1f/0x30 Reported-by: Zhang Guanghui <zhang.guanghui@cestc.cn> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Caleb Sander Mateos
|
578539e096 |
nvme-tcp: fix connect failure on receiving partial ICResp PDU
nvme_tcp_init_connection() attempts to receive an ICResp PDU but only
checks that the return value from recvmsg() is non-negative. If the
sender closes the TCP connection or sends fewer than 128 bytes, this
check will pass even though the full PDU wasn't received.
Ensure the full ICResp PDU is received by checking that recvmsg()
returns the expected 128 bytes.
Additionally set the MSG_WAITALL flag for recvmsg(), as a sender could
split the ICResp over multiple TCP frames. Without MSG_WAITALL,
recvmsg() could return prematurely with only part of the PDU.
Fixes:
|
||
|
Damien Le Moal
|
cd513e0434 |
nvme: tcp: Fix compilation warning with W=1
When compiling with W=1, a warning result for the function
nvme_tcp_set_queue_io_cpu():
host/tcp.c:1578: warning: Function parameter or struct member 'queue'
not described in 'nvme_tcp_set_queue_io_cpu'
host/tcp.c:1578: warning: expecting prototype for Track the number of
queues assigned to each cpu using a global per(). Prototype was for
nvme_tcp_set_queue_io_cpu() instead
Avoid this warning by using the regular comment format for the function
nvme_tcp_set_queue_io_cpu() instead of the kdoc comment format.
Fixes:
|
||
|
Maurizio Lombardi
|
84e009042d |
nvme-tcp: add basic support for the C2HTermReq PDU
Previously, the NVMe/TCP host driver did not handle the C2HTermReq PDU, instead printing "unsupported pdu type (3)" when received. This patch adds support for processing the C2HTermReq PDU, allowing the driver to print the Fatal Error Status field. Example of output: nvme nvme4: Received C2HTermReq (FES = Invalid PDU Header Field) Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Linus Torvalds
|
1cbfb828e0 |
for-6.14/block-20250118
-----BEGIN PGP SIGNATURE-----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=EXYs
-----END PGP SIGNATURE-----
Merge tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Keith:
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)
- MD pull requests via Song:
- Reintroduce md-linear (Yu Kuai)
- md-bitmap refactor and fix (Yu Kuai)
- Replace kmap_atomic with kmap_local_page (David Reaver)
- Quite a few queue freeze and debugfs deadlock fixes
Ming introduced lockdep support for this in the 6.13 kernel, and it
has (unsurprisingly) uncovered quite a few issues
- Use const attributes for IO schedulers
- Remove bio ioprio wrappers
- Fixes for stacked device atomic write support
- Refactor queue affinity helpers, in preparation for better supporting
isolated CPUs
- Cleanups of loop O_DIRECT handling
- Cleanup of BLK_MQ_F_* flags
- Add rotational support for null_blk
- Various fixes and cleanups
* tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits)
block: Don't trim an atomic write
block: Add common atomic writes enable flag
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
block: limit disk max sectors to (LLONG_MAX >> 9)
block: Change blk_stack_atomic_writes_limits() unit_min check
block: Ensure start sector is aligned for stacking atomic writes
blk-mq: Move more error handling into blk_mq_submit_bio()
block: Reorder the request allocation code in blk_mq_submit_bio()
nvme: fix bogus kzalloc() return check in nvme_init_effects_log()
md/md-bitmap: move bitmap_{start, end}write to md upper layer
md/raid5: implement pers->bitmap_sector()
md: add a new callback pers->bitmap_sector()
md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()
md: Replace deprecated kmap_atomic() with kmap_local_page()
md: reintroduce md-linear
partitions: ldm: remove the initial kernel-doc notation
blk-cgroup: rwstat: fix kernel-doc warnings in header file
blk-cgroup: fix kernel-doc warnings in header file
nbd: fix partial sending
...
|
||
|
Sagi Grimberg
|
3219378987 |
nvme-tcp: Fix I/O queue cpu spreading for multiple controllers
Since day-1 we are assigning the queue io_cpu very naively. We always
base the queue id (controller scope) and assign it its matching cpu
from the online mask. This works fine when the number of queues match
the number of cpu cores.
The problem starts when we have less queues than cpu cores. First, we
should take into account the mq_map and select a cpu within the cpus
that are assigned to this queue by the mq_map in order to minimize cross
numa cpu bouncing.
Second, even worse is that we don't take into account multiple
controllers may have assigned queues to a given cpu. As a result we may
simply compund more and more queues on the same set of cpus, which is
suboptimal.
We fix this by introducing global per-cpu counters that tracks the
number of queues assigned to each cpu, and we select the least used cpu
based on the mq_map and the per-cpu counters, and assign it as the queue
io_cpu.
The behavior for a single controller is slightly optimized by selecting
better cpu candidates by consulting with the mq_map, and multiple
controllers are spreading queues among cpu cores much better, resulting
in lower average cpu load, and less likelihood to hit hotspots.
Note that the accounting is not 100% perfect, but we don't need to be,
we're simply putting our best effort to select the best candidate cpu
core that we find at any given point.
Another byproduct is that every controller reset/reconnect may change
the queues io_cpu mapping, based on the current LRU accounting scheme.
Here is the baseline queue io_cpu assignment for 4 controllers, 2 queues
per controller, and 4 cpus on the host:
nvme1: queue 0: using cpu 0
nvme1: queue 1: using cpu 1
nvme2: queue 0: using cpu 0
nvme2: queue 1: using cpu 1
nvme3: queue 0: using cpu 0
nvme3: queue 1: using cpu 1
nvme4: queue 0: using cpu 0
nvme4: queue 1: using cpu 1
And this is the fixed io_cpu assignment:
nvme1: queue 0: using cpu 0
nvme1: queue 1: using cpu 2
nvme2: queue 0: using cpu 1
nvme2: queue 1: using cpu 3
nvme3: queue 0: using cpu 0
nvme3: queue 1: using cpu 2
nvme4: queue 0: using cpu 1
nvme4: queue 1: using cpu 3
Fixes:
|
||
|
Chunguang.xu
|
36e3b1f9ab |
nvme-tcp: remove nvme_tcp_destroy_io_queues()
Now when destroying the IO queue we call nvme_tcp_stop_io_queues() twice, nvme_tcp_destroy_io_queues() has an unnecessary call. Here we try to remove nvme_tcp_destroy_io_queues() and merge it into nvme_tcp_teardown_io_queues(), simplify the code and align with nvme-rdma, make it easy to maintaince. Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Chunguang.xu
|
b4e12f5728 |
nvme-tcp: simplify nvme_tcp_teardown_io_queues()
As nvme_tcp_teardown_io_queues() is the only one caller of nvme_tcp_destroy_admin_queue(), so we can merge it into nvme_tcp_teardown_io_queues() to simplify the code. Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Chunguang.xu
|
fdc5664c69 |
nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues()
As we quiesce admin_q in nvme_tcp_teardown_admin_queue(), so we should no need to quiesce it in nvme_tcp_reaardown_io_queues(), make things simple. Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Chunguang.xu
|
fec55c29e5 |
nvme-tcp: fix the memleak while create new ctrl failed
Now while we create new ctrl failed, we have not free the
tagset occupied by admin_q, here try to fix it.
Fixes:
|
||
|
Hannes Reinecke
|
782373ba27 |
nvme: tcp: avoid race between queue_lock lock and destroy
Commit
|
||
|
Hannes Reinecke
|
5bc46b49c8 |
nvme-tcp: check for invalidated or revoked key
key_lookup() will always return a key, even if that key is revoked or invalidated. So check for invalid keys before continuing. Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Hannes Reinecke
|
363895767f |
nvme-tcp: sanitize TLS key handling
There is a difference between TLS configured (ie the user has provisioned/requested a key) and TLS enabled (ie the connection is encrypted with TLS). This becomes important for secure concatenation, where the initial authentication is run on an unencrypted connection (ie with TLS configured, but not enabled), and then the queue is reset to run over TLS (ie TLS configured _and_ enabled). So to differentiate between those two states store the generated key in opts->tls_key (as we're using the same TLS key for all queues), the key serial of the resulting TLS handshake in ctrl->tls_pskid (to signal that TLS on the admin queue is enabled), and a simple flag for the queues to indicated that TLS has been enabled. Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Ofir Gal
|
6af7331a70 |
nvme-tcp: use sendpages_ok() instead of sendpage_ok()
Currently nvme_tcp_try_send_data() use sendpage_ok() in order to disable MSG_SPLICE_PAGES, it check the first page of the iterator, the iterator may represent contiguous pages. MSG_SPLICE_PAGES enables skb_splice_from_iter() which checks all the pages it sends with sendpage_ok(). When nvme_tcp_try_send_data() sends an iterator that the first page is sendable, but one of the other pages isn't skb_splice_from_iter() warns and aborts the data transfer. Using the new helper sendpages_ok() in order to disable MSG_SPLICE_PAGES solves the issue. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ofir Gal <ofir.gal@volumez.com> Link: https://lore.kernel.org/r/20240718084515.3833733-3-ofir.gal@volumez.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Keith Busch
|
210b1f6576 |
nvme-pci: do not directly handle subsys reset fallout
Scheduling reset_work after a nvme subsystem reset is expected to fail on pcie, but this also prevents potential handling the platform's pcie services may provide that might successfully recovering the link without re-enumeration. Such examples include AER, DPC, and power's EEH. Provide a pci specific operation that safely initiates a subsystem reset, and instead of scheduling reset work, read back the status register to trigger a pcie read error. Since this only affects pci, the other fabrics drivers subscribe to a generic nvmf subsystem reset that is exactly the same as before. The loop fabric doesn't use it because nvmet doesn't support setting that property anyway. And since we're using the magic NSSR value in two places now, provide a symbolic define for it. Reported-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Keith Busch
|
1a9e218195 |
nvme: split device add from initialization
Combining both creates an ambiguous cleanup scenario for the caller if an error is returned: does the device reference need to be dropped or did the error occur before the device was initialized? If an error occurs after the device is added, then the existing cleanup routines will leak memory. Furthermore, the nvme core is taking it upon itself to free the device's kobj name under certain conditions rather than go through the core device API. We shouldn't be peaking into these implementation details. Split the device initialization from the addition to make it easier to know the error handling actions, fix the existing memory leaks, and stop the device layering violations. Link: https://lore.kernel.org/linux-nvme/c4050a37-ecc9-462c-9772-65e25166f439@grimberg.me/ Tested-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org> |