When a controller connects, nvme_start_ctrl() emits the
"NVME_EVENT=connected" uevent and sets the NVME_CTRL_STARTED_ONCE flag.
Currently, the uevent is emitted before the flag is set. This creates a
race condition for userspace tools (like udev rules) that might rely on
the "connected" event to configure other attributes.
Swap the order of operations in nvme_start_ctrl() so that the
NVME_CTRL_STARTED_ONCE flag is set before the uevent is sent. This
guarantees that the admin_timeout can already be changed when userspace
is notified.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The warning is a bit alarming, and it only prints for the very first
non-sgl capable device that receives a passthrough command. Just log an
informational message on initial discovery for every device.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The command was never dispatched for the driver's "host path error", so
the command was never actually initialized and there's no corresponding
submit trace for the completion.
Reported-by: Minsik Jeon <hmi.jeon@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The delayed disk removal work is canceled when a NS (re)appears. However,
we do not put the module reference grabbed in nvme_mpath_remove_disk(), so
fix that.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In the declaration of the structure "core_quirks[]", in the comment
referred to the devices "Kioxia CD6-V Series / HPE PE8030", the
parameter "default_ps_max_latency_us" is reported in a wrong way:
nvme_core.default_ps_max_latency=0
The correct form is, instead:
nvme_core.default_ps_max_latency_us=0
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ga3t
-----END PGP SIGNATURE-----
Merge tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Add shared memory zero-copy I/O support for ublk, bypassing per-I/O
copies between kernel and userspace by matching registered buffer
PFNs at I/O time. Includes selftests.
- Refactor bio integrity to support filesystem initiated integrity
operations and arbitrary buffer alignment.
- Clean up bio allocation, splitting bio_alloc_bioset() into clear fast
and slow paths. Add bio_await() and bio_submit_or_kill() helpers,
unify synchronous bi_end_io callbacks.
- Fix zone write plug refcount handling and plug removal races. Add
support for serializing zone writes at QD=1 for rotational zoned
devices, yielding significant throughput improvements.
- Add SED-OPAL ioctls for Single User Mode management and a STACK_RESET
command.
- Add io_uring passthrough (uring_cmd) support to the BSG layer.
- Replace pp_buf in partition scanning with struct seq_buf.
- zloop improvements and cleanups.
- drbd genl cleanup, switching to pre_doit/post_doit.
- NVMe pull request via Keith:
- Fabrics authentication updates
- Enhanced block queue limits support
- Workqueue usage updates
- A new write zeroes device quirk
- Tagset cleanup fix for loop device
- MD pull requests via Yu Kuai:
- Fix raid5 soft lockup in retry_aligned_read()
- Fix raid10 deadlock with check operation and nowait requests
- Fix raid1 overlapping writes on writemostly disks
- Fix sysfs deadlock on array_state=clear
- Proactive RAID-5 parity building with llbitmap, with
write_zeroes_unmap optimization for initial sync
- Fix llbitmap barrier ordering, rdev skipping, and bitmap_ops
version mismatch fallback
- Fix bcache use-after-free and uninitialized closure
- Validate raid5 journal metadata payload size
- Various cleanups
- Various other fixes, improvements, and cleanups
* tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (146 commits)
ublk: fix tautological comparison warning in ublk_ctrl_reg_buf
scsi: bsg: fix buffer overflow in scsi_bsg_uring_cmd()
block: refactor blkdev_zone_mgmt_ioctl
MAINTAINERS: update ublk driver maintainer email
Documentation: ublk: address review comments for SHMEM_ZC docs
ublk: allow buffer registration before device is started
ublk: replace xarray with IDA for shmem buffer index allocation
ublk: simplify PFN range loop in __ublk_ctrl_reg_buf
ublk: verify all pages in multi-page bvec fall within registered range
ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support
xfs: use bio_await in xfs_zone_gc_reset_sync
block: add a bio_submit_or_kill helper
block: factor out a bio_await helper
block: unify the synchronous bi_end_io callbacks
xfs: fix number of GC bvecs
selftests/ublk: add read-only buffer registration test
selftests/ublk: add filesystem fio verify test for shmem_zc
selftests/ublk: add hugetlbfs shmem_zc test for loop target
selftests/ublk: add shared memory zero-copy test
selftests/ublk: add UBLK_F_SHMEM_ZC support for loop target
...
The NVM Command Set Identify Controller data may report a non-zero
Write Zeroes Size Limit (wzsl). When present, nvme_init_non_mdts_limits()
unconditionally overrides max_zeroes_sectors from wzsl, even if
NVME_QUIRK_DISABLE_WRITE_ZEROES previously set it to zero.
This effectively re-enables write zeroes for devices that need it
disabled, defeating the quirk. Several Kingston OM* drives rely on
this quirk to avoid firmware issues with write zeroes commands.
Check for the quirk before applying the wzsl override.
Fixes: 5befc7c26e ("nvme: implement non-mdts command limits")
Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Assisted-by: claude-opus-4-6-v1
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently, nvme_config_discard() always sets the discard_granularity
queue limit to the logical block size. However, NVMe namespaces can
advertise a larger preferred discard granularity in the NPDG or NPDA
field of the Identify Namespace structure or the NPDGL or NPDAL fields
of the I/O Command Set Specific Identify Namespace structure.
Use these fields to compute the discard_granularity limit. The logic is
somewhat involved. First, the fields are optional. NPDG is only reported
if the low bit of OPTPERF is set in NSFEAT. NPDA is reported if any bit
of OPTPERF is set. And NPDGL and NPDAL are reported if the high bit of
OPTPERF is set. NPDGL and NPDAL can also each be set to 0 to opt out of
reporting a limit. I/O Command Set Specific Identify Namespace may also
not be supported by older NVMe controllers. Another complication is that
multiple values may be reported among NPDG, NPDGL, NPDA, and NPDAL. The
spec says to prefer the values reported in the L variants. The spec says
NPDG should be a multiple of NPDA and NPDGL should be a multiple of
NPDAL, but it doesn't specify a relationship between NPDG and NPDAL or
NPDGL and NPDA. So use the maximum of the reported NPDG(L) and NPDA(L)
values as the discard_granularity.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently, the I/O Command Set specific Identify Namespace structure is
only fetched for controllers that support extended LBA formats. This is
because struct nvme_id_ns_nvm is only used by nvme_configure_pi_elbas(),
which is only called when the ELBAS bit is set in the CTRATT field of
the Identify Controller structure.
However, the I/O Command Set specific Identify Namespace structure will
soon be used in nvme_update_disk_info(), so always try to obtain it in
nvme_update_ns_info_block(). This Identify structure is first defined in
NVMe spec version 2.0, but controllers reporting older versions could
still implement it.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In NVMe verson 2.0 and below, OPTPERF comprises only bit 4 of NSFEAT in
the Identify Namespace structure. Since version 2.1, OPTPERF includes
both bits 4 and 5 of NSFEAT. Replace the NVME_NS_FEAT_IO_OPT constant
with NVME_NS_FEAT_OPTPERF_SHIFT, NVME_NS_FEAT_OPTPERF_MASK, and
NVME_NS_FEAT_OPTPERF_MASK_2_1, representing the first bit, pre-2.1 bit
width, and post-2.1 bit width of OPTPERF.
Update nvme_update_disk_info() to check both OPTPERF bits for
controllers that report version 2.1 or newer, as NPWG and NOWS are
supported even if only bit 5 is set.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The choice of what queue limits are set in nvme_update_disk_info() vs.
nvme_config_discard() seems a bit arbitrary. A subsequent commit will
compute the discard_granularity limit using struct nvme_id_ns, which is
only passed to nvme_update_disk_info() currently. So move the logic in
nvme_config_discard() to nvme_update_disk_info(). Replace several
instances of ns->ctrl in nvme_update_disk_info() with the ctrl variable
brought from nvme_config_discard().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A bio segment may have partial interval block data with the rest
continuing into the next segments because direct-io data payloads only
need to align in memory to the device's DMA limits.
At the same time, the protection information may also be split in
multiple segments. The most likely way that may happen is if two
requests merge, or if we're directly using the io_uring user metadata.
The generate/verify, however, only ever accessed the first bip_vec.
Further, it may be possible to unalign the protection fields from the
user space buffer, or if there are odd additional opaque bytes in front
or in back of the protection information metadata region.
Change up the iteration to allow spanning multiple segments. This patch
is mostly a re-write of the protection information handling to allow any
arbitrary alignments, so it's probably easier to review the end result
rather than the diff.
Many controllers are not able to handle interval data composed of
multiple segments when PI is used, so this patch introduces a new
integrity limit that a low level driver can set to notify that it is
capable, default to false. The nvme driver is the first one to enable it
in this patch. Everyone else will force DMA alignment to the logical
block size as before to ensure interval data is always aligned within a
single segment.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://patch.msgid.link/20260313144701.1221652-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In nvme_alloc_admin_tag_set(), an empty queue_limits struct is
currently allocated on the stack and passed by reference to
blk_mq_alloc_queue().
This is redundant because blk_mq_alloc_queue() already handles
a NULL limits pointer by internally substituting it with a default
empty queue_limits struct.
Remove the unnecessary local variable and pass a NULL value.
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NNcQ
-----END PGP SIGNATURE-----
Merge tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Improve quirk visibility and configurability (Maurizio)
- Fix runtime user modification to queue setup (Keith)
- Fix multipath leak on try_module_get failure (Keith)
- Ignore ambiguous spec definitions for better atomics support
(John)
- Fix admin queue leak on controller reset (Ming)
- Fix large allocation in persistent reservation read keys
(Sungwoo Kim)
- Fix fcloop callback handling (Justin)
- Securely free DHCHAP secrets (Daniel)
- Various cleanups and typo fixes (John, Wilfred)
- Avoid a circular lock dependency issue in the sysfs nr_requests or
scheduler store handling
- Fix a circular lock dependency with the pcpu mutex and the queue
freeze lock
- Cleanup for bio_copy_kern(), using __bio_add_page() rather than the
bio_add_page(), as adding a page here cannot fail. The exiting code
had broken cleanup for the error condition, so make it clear that the
error condition cannot happen
- Fix for a __this_cpu_read() in preemptible context splat
* tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: use trylock to avoid lockdep circular dependency in sysfs
nvme: fix memory allocation in nvme_pr_read_keys()
block: use __bio_add_page in bio_copy_kern
block: break pcpu_alloc_mutex dependency on freeze_lock
blktrace: fix __this_cpu_read/write in preemptible context
nvme-multipath: fix leak on try_module_get failure
nvmet-fcloop: Check remoteport port_state before calling done callback
nvme-pci: do not try to add queue maps at runtime
nvme-pci: cap queue creation to used queues
nvme-pci: ensure we're polling a polled queue
nvme: fix memory leak in quirks_param_set()
nvme: correct comment about nvme_ns_remove()
nvme: stop setting namespace gendisk device driver data
nvme: add support for dynamic quirk configuration via module parameter
nvme: fix admin queue leak on controller reset
nvme-fabrics: use kfree_sensitive() for DHCHAP secrets
nvme: stop using AWUPF
nvme: expose active quirks in sysfs
nvme/host: fixup some typos
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Since commit 1f4137e882 ("nvme: move passthrough logging attribute to
head"), we stopped using the namespace to hold the passthrough logging
enabled attribute. There is now nowhere now which looks up the gendisk dev
driver data, so stop setting it.
Incidentally, it would have been better to set this before adding the
disk.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When nvme_alloc_admin_tag_set() is called during a controller reset,
a previous admin queue may still exist. Release it properly before
allocating a new one to avoid orphaning the old queue.
This fixes a regression introduced by commit 03b3bcd319 ("nvme: fix
admin request_queue lifetime").
Cc: Keith Busch <kbusch@kernel.org>
Fixes: 03b3bcd319 ("nvme: fix admin request_queue lifetime").
Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAHj4cs9wv3SdPo+N01Fw2SHBYDs9tj2M_e1-GdQOkRy=DsBB1w@mail.gmail.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
As described at [0], much of the atomic write parts of the specification
are lacking.
For now, there is nothing which we can do in software about the lack of
a dedicated NVMe write atomic command.
As for reading the atomic write limits, it is felt that the per-namespace
values are mostly properly specified and it is assumed that they are
properly implemented.
The specification of NAWUPF is quite clear. However the specification of
NABSPF is less clear. The lack of clarity in NABSPF comes from deciding
whether NABSPF applies when NSABP is 0 - it is assumed that NSABPF does
not apply when NSABP is 0.
As for the per-controller AWUPF, how this value applies to shared
namespaces is missing in the specification. Furthermore, the value is in
terms of logical blocks, which is an NS entity.
Since AWUPF is so poorly defined, stop using it already together.
Hopefully this will force vendors to implement NAWUPF support always.
Note that AWUPF not only effects atomic write support, but also the
physical block size reported for the device.
To help users know this restriction, log an info message per NS.
[0] https://lore.kernel.org/linux-nvme/20250707141834.GA30198@lst.de/
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add a third parameter 'const struct io_comp_batch *' to the rq_end_io_fn
callback signature. This allows end_io handlers to access the completion
batch context when requests are completed via blk_mq_end_request_batch().
The io_comp_batch is passed from blk_mq_end_request_batch(), while NULL
is passed from __blk_mq_end_request() and blk_mq_put_rq_ref() which don't
have batch context.
This infrastructure change enables drivers to detect whether they're
being called from a batched completion path (like iopoll) and access
additional context stored in the io_comp_batch.
Update all rq_end_io_fn implementations:
- block/blk-mq.c: blk_end_sync_rq
- block/blk-flush.c: flush_end_io, mq_flush_data_end_io
- drivers/nvme/host/ioctl.c: nvme_uring_cmd_end_io
- drivers/nvme/host/core.c: nvme_keep_alive_end_io
- drivers/nvme/host/pci.c: abort_endio, nvme_del_queue_end, nvme_del_cq_end
- drivers/nvme/target/passthru.c: nvmet_passthru_req_done
- drivers/scsi/scsi_error.c: eh_lock_door_done
- drivers/scsi/sg.c: sg_rq_end_io
- drivers/scsi/st.c: st_scsi_execute_end
- drivers/target/target_core_pscsi.c: pscsi_req_done
- drivers/md/dm-rq.c: end_clone_request
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=m22w
-----END PGP SIGNATURE-----
Merge tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Fix head insertion for mq-deadline, a regression from when priority
support was added
- Series simplifying and improving the ublk user copy code
- Various ublk related cleanups
- Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
request is punted to a thread for handling
- Merge and then later revert loop dio nowait support, as it ended up
causing excessive stack usage for when the inline issue code needs to
dip back into the full file system code
- Improve auto integrity code, making it less deadlock prone
- Speedup polled IO handling, but manually managing the hctx lookups
- Fixes for blk-throttle for SSD devices
- Small series with fixes for the S390 dasd driver
- Add support for caching zones, avoiding unnecessary report zone
queries
- MD pull requests via Yu:
- fix null-ptr-dereference regression for dm-raid0
- fix IO hang for raid5 when array is broken with IO inflight
- remove legacy 1s delay to speed up system shutdown
- change maintainer's email address
- data can be lost if array is created with different lbs devices,
fix this problem and record lbs of the array in metadata
- fix rcu protection for md_thread
- fix mddev kobject lifetime regression
- enable atomic writes for md-linear
- some cleanups
- bcache updates via Coly
- remove useless discard and cache device code
- improve usage of per-cpu workqueues
- Reorganize the IO scheduler switching code, fixing some lockdep
reports as well
- Improve the block layer P2P DMA support
- Add support to the block tracing code for zoned devices
- Segment calculation improves, and memory alignment flexibility
improvements
- Set of prep and cleanups patches for ublk batching support. The
actual batching hasn't been added yet, but helps shrink down the
workload of getting that patchset ready for 6.20
- Fix for how the ps3 block driver handles segments offsets
- Improve how block plugging handles batch tag allocations
- nbd fixes for use-after-free of the configuration on device clear/put
- Set of improvements and fixes for zloop
- Add Damien as maintainer of the block zoned device code handling
- Various other fixes and cleanups
* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
block/rnbd: correct all kernel-doc complaints
blk-mq: use queue_hctx in blk_mq_map_queue_type
md: remove legacy 1s delay in md_notify_reboot
md/raid5: fix IO hang when array is broken with IO inflight
md: warn about updating super block failure
md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
sbitmap: fix all kernel-doc warnings
ublk: add helper of __ublk_fetch()
ublk: pass const pointer to ublk_queue_is_zoned()
ublk: refactor auto buffer register in ublk_dispatch_req()
ublk: add `union ublk_io_buf` with improved naming
ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
kfifo: add kfifo_alloc_node() helper for NUMA awareness
blk-mq: fix potential uaf for 'queue_hw_ctx'
blk-mq: use array manage hctx map instead of xarray
ublk: prevent invalid access with DEBUG
s390/dasd: Use scnprintf() instead of sprintf()
s390/dasd: Move device name formatting into separate function
s390/dasd: Remove unnecessary debugfs_create() return checks
s390/dasd: Fix gendisk parent after copy pair swap
...
The nvme virtual boundary is only required for the PRP format. Devices
that can use SGL for DMA don't need it for IO queues. Drop reporting it
for such devices; rdma fabrics controllers will continue to use the
limit as they currently don't report any boundary requirements, but tcp
and fc never needed it in the first place so they get to report no
virtual boundary.
Applications may continue to align to the same virtual boundaries for
optimization purposes if they want, and the driver will continue to
decide whether to use the PRP format the same as before if the IO allows
it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b76b840fd9 ("dm: Fix dm-zoned-reclaim zone write pointer
alignment") introduced an indirect call for the callback function of a
report zones executed with blkdev_report_zones(). This is necessary so
that the function disk_zone_wplug_sync_wp_offset() can be called to
refresh a zone write plug zone write pointer offset after a write error.
However, this solution makes following the path of a zone information
harder to understand.
Clean this up by introducing the new blk_report_zones_args structure to
define a zone report callback and its private data and introduce the
helper function disk_report_zone() which calls both
disk_zone_wplug_sync_wp_offset() and the zone report user callback
function for all zones of a zone report. This helper function must be
called by all block device drivers that implement the report zones
block operation in order to correctly report a zone information.
All block device drivers supporting the report_zones block operation are
updated to use this new scheme.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=kOmc
-----END PGP SIGNATURE-----
Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
-----BEGIN PGP SIGNATURE-----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=PsS2
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.18-2025-09-23' of git://git.infradead.org/nvme into for-6.18/block
Pull NVMe updates from Keith:
" - FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)"
* tag 'nvme-6.18-2025-09-23' of git://git.infradead.org/nvme:
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
nvme-pci: Add TUXEDO IBS Gen8 to Samsung sleep quirk
nvme-auth: use hkdf_expand_label()
nvme-auth: add hkdf_expand_label()
nvme-tcp: send only permitted commands for secure concat
nvme-fc: use lock accessing port_state and rport state
nvmet-fcloop: call done callback even when remote port is gone
nvmet-fc: avoid scheduling association deletion twice
nvmet-fc: move lsop put work to nvmet_fc_ls_req_op
nvme-auth: update bi_directional flag
The NVMe Base Specification 2.1 states that:
"""
A host requests an explicit persistent connection ... by specifying a
non-zero Keep Alive Timer value in the Connect command.
"""
As such if we are starting a persistent connection to a discovery
controller and the KATO is currently 0 we need to update KATO to a non
zero value to avoid continuous timeouts on the target.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Replace the current I/O controller check in
nvme_init_non_mdts_limits() with the helper nvme_is_io_ctrl()
function to maintain consistency with similar checks in other
parts of the code and improve code readability.
Signed-off-by: Martin George <marting@netapp.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
An administrative controller does not support I/O queues, hence it
should ignore existing checks for IOCCSZ/IORCSZ. Currently, these checks
only exclude a discovery controller but need to also exclude an
administrative controller.
Signed-off-by: Kamaljit Singh <kamaljit.singh@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add nvme_is_io_ctrl() to check if the controller is of type I/O
controller. Uses negative logic by excluding an administrative
controller and a discovery controller.
Signed-off-by: Kamaljit Singh <kamaljit.singh@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
I recently ran into an issue where the PI generated using the block layer
integrity code differs from that from a kernel using the PRACT fallback
when the block layer integrity code is disabled, and I tracked this down
to us using PRACT incorrectly.
The NVM Command Set Specification (section 5.33 in 1.2, similar in older
versions) specifies the PRACT insert behavior as:
Inserted protection information consists of the computed CRC for the
protection information format (refer to section 5.3.1) in the Guard
field, the LBAT field value in the Application Tag field, the LBST
field value in the Storage Tag field, if defined, and the computed
reference tag in the Logical Block Reference Tag.
Where the computed reference tag is defined as following for type 1 and
type 2 using the text below that is duplicated in the respective bullet
points:
the value of the computed reference tag for the first logical block of
the command is the value contained in the Initial Logical Block
Reference Tag (ILBRT) or Expected Initial Logical Block Reference Tag
(EILBRT) field in the command, and the computed reference tag is
incremented for each subsequent logical block.
So we need to set ILBRT field, but we currently don't. Interestingly
this works fine on my older type 1 formatted SSD, but Qemu trips up on
this. We already set ILBRT for Write Same since commit aeb7bb061be5
("nvme: set the PRACT bit when using Write Zeroes with T10 PI").
To ease this, move the PI type check into nvme_set_ref_tag.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Instances are happier that way and it makes more sense anyway -
the only part of the result that is related to partition we are given
is the start sector, and that has been filled in by the caller.
Everything else is a function of the disk. Only one instance
(DASD) is ever looking at anything other than bdev->bd_disk and
that one is trivial to adjust.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add capability to connect to an administrative controller by
preventing ioq creation for admin-controllers.
Add a nvme_admin_ctrl() to check if a controller's CNTRLTYPE indicates
that it is an administrative controller and override ctrl->queue_count to
1 for admin controllers, so that only the admin queue and no I/O queues
are created for an administrative controller. This override is done in
nvme_init_ctrl_finish() after ctrl->cntrltype has been initialized in
nvme_init_identify() so nvme_admin_ctrl() will work correctly.
Doing this override in generic code (nvme_init_ctrl_finish) makes it
transport agnostic and will work properly for nvme/tcp as well as for
nvme/rdma.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Kamaljit Singh <kamaljit.singh1@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=e86T
-----END PGP SIGNATURE-----
Merge tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCngAKCRCRxhvAZXjc
ogAMAP9LqNHFf7JfDIvF/PJBxzYa0ToWwPsWACERknwkvtBRCwEAhkmscIcIMQ4t
LPGLGha17dfpaE4RurRhBYgS9x2/1Ao=
=jSnJ
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs 'protection info' updates from Christian Brauner:
"This adds the new FS_IOC_GETLBMD_CAP ioctl() to query metadata and
protection info (PI) capabilities. This ioctl returns information
about the files integrity profile. This is useful for userspace
applications to understand a files end-to-end data protection support
and configure the I/O accordingly.
For now this interface is only supported by block devices. However the
design and placement of this ioctl in generic FS ioctl space allows us
to extend it to work over files as well. This maybe useful when
filesystems start supporting PI-aware layouts.
A new structure struct logical_block_metadata_cap is introduced, which
contains the following fields:
- lbmd_flags:
bitmask of logical block metadata capability flags
- lbmd_interval:
the amount of data described by each unit of logical block metadata
- lbmd_size:
size in bytes of the logical block metadata associated with each
interval
- lbmd_opaque_size:
size in bytes of the opaque block tag associated with each interval
- lbmd_opaque_offset:
offset in bytes of the opaque block tag within the logical block
metadata
- lbmd_pi_size:
size in bytes of the T10 PI tuple associated with each interval
- lbmd_pi_offset:
offset in bytes of T10 PI tuple within the logical block metadata
- lbmd_pi_guard_tag_type:
T10 PI guard tag type
- lbmd_pi_app_tag_size:
size in bytes of the T10 PI application tag
- lbmd_pi_ref_tag_size:
size in bytes of the T10 PI reference tag
- lbmd_pi_storage_tag_size:
size in bytes of the T10 PI storage tag
The internal logic to fetch the capability is encapsulated in a helper
function blk_get_meta_cap(), which uses the blk_integrity profile
associated with the device. The ioctl returns -EOPNOTSUPP, if
CONFIG_BLK_DEV_INTEGRITY is not enabled"
* tag 'vfs-6.17-rc1.integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
block: fix lbmd_guard_tag_type assignment in FS_IOC_GETLBMD_CAP
block: fix FS_IOC_GETLBMD_CAP parsing in blkdev_common_ioctl()
fs: add ioctl to query metadata and protection info capabilities
nvme: set pi_offset only when checksum type is not BLK_INTEGRITY_CSUM_NONE
block: introduce pi_tuple_size field in blk_integrity
block: rename tuple_size field in blk_integrity to metadata_size
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCeQAKCRCRxhvAZXjc
otqEAP9bWFExQtnzrNR+1s4UBfPVDAaTJzDnBWj6z0+Idw9oegEAoxF2ifdCPnR4
t/xWiM4FmSA+9pwvP3U5z3sOReDDsgo=
=WMMB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fallocate updates from Christian Brauner:
"fallocate() currently supports creating preallocated files
efficiently. However, on most filesystems fallocate() will preallocate
blocks in an unwriten state even if FALLOC_FL_ZERO_RANGE is specified.
The extent state must later be converted to a written state when the
user writes data into this range, which can trigger numerous metadata
changes and journal I/O. This may leads to significant write
amplification and performance degradation in synchronous write mode.
At the moment, the only method to avoid this is to create an empty
file and write zero data into it (for example, using 'dd' with a large
block size). However, this method is slow and consumes a considerable
amount of disk bandwidth.
Now that more and more flash-based storage devices are available it is
possible to efficiently write zeros to SSDs using the unmap write
zeroes command if the devices do not write physical zeroes to the
media.
For example, if SCSI SSDs support the UMMAP bit or NVMe SSDs support
the DEAC bit[1], the write zeroes command does not write actual data
to the device, instead, NVMe converts the zeroed range to a
deallocated state, which works fast and consumes almost no disk write
bandwidth.
This series implements the BLK_FEAT_WRITE_ZEROES_UNMAP feature and
BLK_FLAG_WRITE_ZEROES_UNMAP_DISABLED flag for SCSI, NVMe and
device-mapper drivers, and add the FALLOC_FL_WRITE_ZEROES and
STATX_ATTR_WRITE_ZEROES_UNMAP support for ext4 and raw bdev devices.
fallocate() is subsequently extended with the FALLOC_FL_WRITE_ZEROES
flag. FALLOC_FL_WRITE_ZEROES zeroes a specified file range in such a
way that subsequent writes to that range do not require further
changes to the file mapping metadata. This flag is beneficial for
subsequent pure overwriting within this range, as it can save on block
allocation and, consequently, significant metadata changes"
* tag 'vfs-6.17-rc1.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ext4: add FALLOC_FL_WRITE_ZEROES support
block: add FALLOC_FL_WRITE_ZEROES support
block: factor out common part in blkdev_fallocate()
fs: introduce FALLOC_FL_WRITE_ZEROES to fallocate
dm: clear unmap write zeroes limits when disabling write zeroes
scsi: sd: set max_hw_wzeroes_unmap_sectors if device supports SD_ZERO_*_UNMAP
nvmet: set WZDS and DRB if device enables unmap write zeroes operation
nvme: set max_hw_wzeroes_unmap_sectors if device supports DEAC bit
block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits
This commit fixes several typos and grammatical issues across various
nvme host driver files:
- correct "glace" to "glance" in a comment in apple.c
- fix "Idependent" to "Independent" in core.c
- change "unsucceesful" to "unsuccessful", "they blk-mq" to "the blk-mq",
- fix "terminaed" to "terminated" and other grammar in fc.c
- update "O's" to "0's" to clarify meaning in nvme.h
- fix a function name reference in a comment in zns.c:
*_transter_len() -> *_transfer_len().
- fix sysfs_emit() output format in pci.c (replace x%08x with 0x%08x)
These changes improve the code readability and documentation consistency
across the NVMe driver.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Procedures for nvme-mpath IO accounting:
1) initialize nvme_request and clear flags;
2) set NVME_MPATH_IO_STATS and increase inflight counter when IO
started;
3) check NVME_MPATH_IO_STATS and decrease inflight counter when IO is
done;
However, for the case nvme_fail_nonready_command(), both step 1) and 2)
are skipped, and if old nvme_request set NVME_MPATH_IO_STATS and then
request is reused, step 3) will still be executed, causing inflight I/O
counter to be negative.
Fix the problem by clearing nvme_request in nvme_fail_nonready_command().
Fixes: ea5e5f42cd ("nvme-fabrics: avoid double completions in nvmf_fail_nonready_command")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs_+dauobyYyP805t33WMJVzOWj=7+51p4_j9rA63D9sog@mail.gmail.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This was originally added by commit 8695f060a0 ("nvme: all namespaces
in a subsystem must adhere to a common atomic write size") to check
the all controllers in a subsystem report the same atomic write size,
but the check wasn't quite correct and caused problems for devices
with multiple namespaces that report different LBA sizes. Commit
f46d273449 ("nvme: fix atomic write size validation") tried to fix
this, but then caused problems for namespace rediscovery after a
format with an LBA size change that changes the AWUPF value.
This drops the validation and essentially reverts those two commits while
keeping the cleanup that went in between the two. We'll need to figure
out how to properly check for the mouse trap that nvme left us, but for
now revert the check to keep devices working for users who couldn't care
less about the atomic write feature.
Fixes: 8695f060a0 ("nvme: all namespaces in a subsystem must adhere to a common atomic write size")
Fixes: f46d273449 ("nvme: fix atomic write size validation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
The command word members of struct nvme_common_command are __le32 type,
so use helper le32_to_cpu() to read them properly.
Fixes: 9f079dda14 ("nvme: allow passthru cmd error logging")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When inserting a namespace into the controller's namespace list, the
function uses list_add_rcu() when the namespace is inserted in the middle
of the list, but falls back to a regular list_add() when adding at the
head of the list.
This inconsistency could lead to race conditions during concurrent
access, as users might observe a partially updated list. Fix this by
consistently using list_add_rcu() in both code paths to ensure proper
RCU protection throughout the entire function.
Fixes: be647e2c76 ("nvme: use srcu for iterating namespace list")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
protection information is treated as opaque when checksum type is
BLK_INTEGRITY_CSUM_NONE. In order to maintain the right metadata
semantics, set pi_offset only in cases where checksum type is not
BLK_INTEGRITY_CSUM_NONE.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/20250630090548.3317-4-anuj20.g@samsung.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Introduce a new pi_tuple_size field in struct blk_integrity to
explicitly represent the size (in bytes) of the protection information
(PI) tuple. This is a prep patch.
Add validation in blk_validate_integrity_limits() to ensure that
pi size matches the expected size for known checksum types and never
exceeds the pi_tuple_size.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/20250630090548.3317-3-anuj20.g@samsung.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The tuple_size field in blk_integrity currently represents the total
size of metadata associated with each data interval. To make the meaning
more explicit, rename tuple_size to metadata_size. This is a purely
mechanical rename with no functional changes.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/20250630090548.3317-2-anuj20.g@samsung.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The blktests nvme/058 manifests an issue where the NVMe subsystem
kobject entry remains stale in sysfs, causing a failure during
subsequent NVMe module reloads[1]. Specifically, when attempting to
register a new NVMe subsystem, the driver encounters a kobejct name
collision because a stale kobject still exists. Though, please note
that nvme/058 doesn't report any failure and test case passes and
it's only during subsequent NVMe module reloads, the stale nvme sub-
system kobject entry in sysfs causes the observed symptom[1].
This issue stems from an imbalance in the get/put usage of the namespace
head (nshead) reference counter. The nshead holds a reference to the
associated NVMe subsystem. If the nshead reference is not properly
released, it prevents the cleanup of the subsystem's kobject, leaving
nvme subsystem stale entry behind in sysfs.
During the failure case, the last namespace path referencing a nshead
is removed, but the nshead reference was not released. This occurs
because the release logic currently only puts the nshead reference
when its state is LIVE. However, in configurations where ANA (Asymmetric
Namespace Access) is enabled, a namespace may be associated with an ANA
state that is neither optimized nor non-optimized. In this case, the
nshead may never transition to LIVE, and the corresponding nshead
reference is then never dropped. In fact nvme/058 associates some of
nvme namespaces to an inaccessible ANA state and with that nshead is
created but it's state is not transitioned to LIVE. So the current
logic would then causes nshead reference to be leaked for non-LIVE
states.
Another scenario, during namespace allocation, the driver first
allocates a nshead and then issues an Identify Namespace command. If
this command fails — which can happen in tests like nvme/058 that
rapidly enables and disables namespaces — we must release the reference
to the newly allocated nshead. However this reference release is
currently missing in the failure, causing a nshead reference leak.
To fix this, we now unconditionally release the nshead reference when
the last nvme path referencing to the nshead is removed, regardless of
the head’s state. Also during identify namespace failure case we now
properly release the nshead reference. So this ensures proper cleanup
of the nshead, and consequently, the NVMe subsystem and its associated
kobject.
This change prevents stale kobject entries from lingering in sysfs and
eliminates the module reload failures observed just after running
nvme/058.
[1] https://lore.kernel.org/all/CAHj4cs8fOBS-eSjsd5LUBzy7faKXJtgLkCN+mDy_-ezCLLLq+Q@mail.gmail.com/
Reported-by: yi.zhang@redhat.com
Closes: https://lore.kernel.org/all/CAHj4cs8fOBS-eSjsd5LUBzy7faKXJtgLkCN+mDy_-ezCLLLq+Q@mail.gmail.com/
Fixes: 62188639ec ("nvme-multipath: introduce delayed removal of the multipath head node")
Tested-by: yi.zhang@redhat.com
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fix an error in nvme_log_err_passthru() where cdw14 was incorrectly
printed twice instead of cdw15. This fix ensures accurate logging of
the full passthrough command payload.
Fixes: 9f079dda14 ("nvme: allow passthru cmd error logging")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Don't mix the namespace and controller values, and validate the
per-controller limit when probing the controller. This avoid spurious
failures for controllers with namespaces that have different namespaces
with different logical block sizes, or report the per-namespace values
only for some namespaces.
It also fixes a missing queue_limits_cancel_update in an error path by
removing that error path.
Fixes: 8695f060a0 ("nvme: all namespaces in a subsystem must adhere to a common atomic write size")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
