Report standard counter stats->rx_missed_errors
using hc_rx_discards_no_wqe from the hardware.
Add a global workqueue to periodically run
mana_query_gf_stats every 2 seconds to get the latest
info in eth_stats and define a driver capability flag
to notify hardware of the periodic queries.
To avoid repeated failures and log flooding, the workqueue
is not rescheduled if mana_query_gf_stats fails on HWC timeout
error and the stats are reset to 0. Other errors are transient
which will not need a VF reset for recovery.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1763120599-6331-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move hardware counter (HC) statistics from mana_port_context to
mana_context to enable sharing stats across multiple network ports
on the same MANA VF. Previously, each network port queried
hardware counters independently using MANA_QUERY_GF_STAT command
(GF = Generic Function stats from GDMA hardware), resulting in
redundant queries when multiple ports existed on the same device.
Isolate hardware counter stats by introducing mana_ethtool_hc_stats
in mana_context and update the code to ensure all stats are properly
reported via ethtool -S <interface>, maintaining consistency with
previous behavior.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1763120599-6331-2-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once the netshaper is created for MANA, the current bandwidth
is reported in debugfs like this:
$ sudo ./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do set \
--json '{"ifindex":'3',
"handle":{ "scope": "netdev", "id":'1' },
"bw-max": 200000000 }'
None
$ sudo cat /sys/kernel/debug/mana/1/vport0/current_speed
200
After the shaper is deleted, it is expected to report
the maximum speed supported by the SKU. But currently it is
reporting 0, which is incorrect.
Fix this inconsistency, by resetting apc->speed to apc->max_speed
during deletion of the shaper object. This will improve
readability and debuggability.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1762369468-32570-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Handle the NIC hardware link state events received from the HW
channel, then set the proper link state accordingly.
And, add a feature bit, GDMA_DRV_CAP_FLAG_1_HW_VPORT_LINK_AWARE,
to inform the NIC hardware this handler exists.
Our MANA NIC only sends out the link state down/up messages
when we need to let the VM rerun DHCP client and change IP
address. So, add netif_carrier_on() in the probe(), let the NIC
show the right initial state in /sys/class/net/ethX/operstate.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1761770601-16920-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If HW Channel (HWC) is not responding, reduce the waiting time, so further
steps will fail quickly.
This will prevent getting stuck for a long time (30 minutes or more), for
example, during unloading while HWC is not responding.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1757537841-5063-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NET_SHAPER is always selected for MANA driver. When NET_SHAPER is enabled,
netdev_lock_ops_to_full() reduces effectively to only an assert for lock,
which is always held in the path when NET_SHAPER is enabled.
Remove the redundant netdev_lock_ops_to_full() call.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://patch.msgid.link/1757393830-20837-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch enhances RX buffer handling in the mana driver by allocating
pages from a page pool and slicing them into MTU-sized fragments, rather
than dedicating a full page per packet. This approach is especially
beneficial on systems with large base page sizes like 64KB.
Key improvements:
- Proper integration of page pool for RX buffer allocations.
- MTU-sized buffer slicing to improve memory utilization.
- Reduce overall per Rx queue memory footprint.
- Automatic fallback to full-page buffers when:
* Jumbo frames are enabled (MTU > PAGE_SIZE / 2).
* The XDP path is active, to avoid complexities with fragment reuse.
Testing on VMs with 64KB pages shows around 200% throughput improvement.
Memory efficiency is significantly improved due to reduced wastage in page
allocations. Example: We are now able to fit 35 rx buffers in a single 64kb
page for MTU size of 1500, instead of 1 rx buffer per page previously.
Tested:
- iperf3, iperf2, and nttcp benchmarks.
- Jumbo frames with MTU 9000.
- Native XDP programs (XDP_PASS, XDP_DROP, XDP_TX, XDP_REDIRECT) for
testing the XDP path in driver.
- Memory leak detection (kmemleak).
- Driver load/unload, reboot, and stress scenarios.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20250814140410.GA22089@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix below warning in Hyper-V's MANA drivers that comes when kernel is
compiled with W=1 option. Include export.h in driver files to fix it.
* warning: EXPORT_SYMBOL() is used, but #include <linux/export.h>
is missing
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250611100459.92900-7-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250611100459.92900-7-namjain@linux.microsoft.com>
Upon receiving the Reset Request, pause the connection and clean up
queues, wait for the specified period, then resume the NIC.
In the cleanup phase, the HWC is no longer responding, so set hwc_timeout
to zero to skip waiting on the response.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1751055983-29760-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MANA supports RDMA in PF mode. The driver should record the doorbell
physical address when in PF mode.
The doorbell physical address is used by the RDMA driver to map
doorbell pages of the device to user-mode applications through RDMA
verbs interface. In the past, they have been mapped to user-mode while
the device is in VF mode. With the support for PF mode implemented,
also expose those pages in PF mode.
Support for PF mode is implemented in
290e5d3c49 ("net: mana: Add support for Multi Vports on Bare metal")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1750210606-12167-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow tx_packets and tx_bytes counter in the driver to represent
the packets transmitted post GSO processing.
Currently they are populated as bigger pre-GSO packets and bytes
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If any of the HWC commands are not recognized by the
underlying hardware, the hardware returns the response
header status of -1. Log the information using
netdev_info_once to avoid multiple error logs in dmesg.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.
The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.
These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.
Before:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
After:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 16000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for net_shaper_ops in the MANA driver,
enabling configuration of rate limiting on the MANA NIC.
To apply rate limiting, the driver issues a HWC command via
mana_set_bw_clamp() and updates the corresponding shaper object
in the net_shaper cache. If an error occurs during this process,
the driver restores the previous speed by querying the current link
configuration using mana_query_link_cfg().
The minimum supported bandwidth is 100 Mbps, and only values that are
exact multiples of 100 Mbps are allowed. Any other values are rejected.
To remove a shaper, the driver resets the bandwidth to the maximum
supported by the SKU using mana_set_bw_clamp() and clears the
associated cache entry. If an error occurs during this process,
the shaper details are retained.
On the hardware that does not support these APIs, the net-shaper
calls to set speed would fail.
Set the speed:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do set --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' },
"bw-max": 200000000 }'
Get the shaper details:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do get --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' }}'
> {'bw-max': 200000000,
> 'handle': {'scope': 'netdev'},
> 'ifindex': $IFINDEX,
> 'metric': 'bps'}
Delete the shaper object:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do delete --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev","id":'$ID' }}'
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When net_shaper_ops are enabled for MANA, netdev_ops_lock
becomes active.
MANA VF setup/teardown by netvsc follows this call chain:
netvsc_vf_setup()
dev_change_flags()
...
__dev_open() OR __dev_close()
dev_change_flags() holds the netdev mutex via netdev_lock_ops.
Meanwhile, mana_create_txq() and mana_create_rxq() in mana_open()
path call NAPI APIs (netif_napi_add_tx(), netif_napi_add_weight(),
napi_enable()), which also try to acquire the same lock, risking
deadlock.
Similarly in the teardown path (mana_close()), netif_napi_disable()
and netif_napi_del(), contend for the same lock.
Switch to the _locked variants of these APIs to avoid deadlocks
when the netdev_ops_lock is held.
Fixes: d4c22ec680 ("net: hold netdev instance lock during ndo_open/ndo_stop")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-2-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shradha Gupta says:
====================
Allow dyn MSI-X vector allocation of MANA
In this patchset we want to enable the MANA driver to be able to
allocate MSI-X vectors in PCI dynamically.
The first patch exports pci_msix_prepare_desc() in PCI to be able to
correctly prepare descriptors for dynamically added MSI-X vectors.
The second patch adds the support of dynamic vector allocation in
pci-hyperv PCI controller by enabling the MSI_FLAG_PCI_MSIX_ALLOC_DYN
flag and using the pci_msix_prepare_desc() exported in first patch.
The third patch adds a detailed description of the irq_setup(), to
help understand the function design better.
The fourth patch is a preparation patch for mana changes to support
dynamic IRQ allocation. It contains changes in irq_setup() to allow
skipping first sibling CPU sets, in case certain IRQs are already
affinitized to them.
The fifth patch has the changes in MANA driver to be able to allocate
MSI-X vectors dynamically. If the support does not exist it defaults to
older behavior.
* 'shradha_v6.16-rc1' of https://github.com/shradhagupta6/linux:
net: mana: Allocate MSI-X vectors dynamically
net: mana: Allow irq_setup() to skip cpus for affinity
net: mana: explain irq_setup() algorithm
PCI: hv: Allow dynamic MSI-X vector allocation
PCI/MSI: Export pci_msix_prepare_desc() for dynamic MSI-X allocations
====================
Link: https://patch.msgid.link/1749650984-9193-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the MANA driver allocates MSI-X vectors statically based on
MANA_MAX_NUM_QUEUES and num_online_cpus() values and in some cases ends
up allocating more vectors than it needs. This is because, by this time
we do not have a HW channel and do not know how many IRQs should be
allocated.
To avoid this, we allocate 1 MSI-X vector during the creation of HWC and
after getting the value supported by hardware, dynamically add the
remaining MSI-X vectors.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
In order to prepare the MANA driver to allocate the MSI-X IRQs
dynamically, we need to enhance irq_setup() to allow skipping
affinitizing IRQs to the first CPU sibling group.
This would be for cases when the number of IRQs is less than or equal
to the number of online CPUs. In such cases for dynamically added IRQs
the first CPU sibling group would already be affinitized with HWC IRQ.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Commit 91bfe210e1 ("net: mana: add a function to spread IRQs per CPUs")
added the irq_setup() function that distributes IRQs on CPUs according
to a tricky heuristic. The corresponding commit message explains the
heuristic.
Duplicate it in the source code to make available for readers without
digging git in history. Also, add more detailed explanation about how
the heuristics is implemented.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
To collaborate with hardware servicing events, upon receiving the special
EQE notification from the HW channel, remove the devices on this bus.
Then, after a waiting period based on the device specs, rescan the parent
bus to recover the devices.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1749834034-18498-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for reporting additional hardware counters for drop and
TC using the ethtool -S interface.
These counters include:
- Aggregate Rx/Tx drop counters
- Per-TC Rx/Tx packet counters
- Per-TC Rx/Tx byte counters
- Per-TC Rx/Tx pause frame counters
The counters are exposed using ethtool_ops->get_ethtool_stats and
ethtool_ops->get_strings. This feature/counters are not available
to all versions of hardware.
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20250609100103.GA7102@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Usual collection of driver fixes:
- Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw
- Further ODP functionality in rxe
- Remote access MRs in mana, along with more page sizes
- Improve CM scalability with a rwlock around the agent
- More trace points for hns
- ODP hmm conversion to the new two step dma API
- Support the ethernet HW device in mana as well as the RNIC
- Cleanups:
* Use secs_to_jiffies() when appropriate
* Use ERR_CAST() instead of naked casts
* Don't use %pK in printk
* Unusued functions removed
* Allocation type matching
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaDm95gAKCRCFwuHvBreF
YXJxAQCZ+p+mxt0rTeVI2j6YQ26thuvb/tH0Upu8epgdQ3T/ZgD/YOHBC6OrXWJa
Uz6BTiyz/xiyMtJLTD4kEiG2o74J1gE=
=DNQC
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of driver fixes:
- Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw
- Further ODP functionality in rxe
- Remote access MRs in mana, along with more page sizes
- Improve CM scalability with a rwlock around the agent
- More trace points for hns
- ODP hmm conversion to the new two step dma API
- Support the ethernet HW device in mana as well as the RNIC
- Cleanups:
- Use secs_to_jiffies() when appropriate
- Use ERR_CAST() instead of naked casts
- Don't use %pK in printk
- Unusued functions removed
- Allocation type matching"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (57 commits)
RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work
RDMA/bnxt_re: Support extended stats for Thor2 VF
RDMA/hns: Fix endian issue in trace events
RDMA/mlx5: Avoid flexible array warning
IB/cm: Remove dead code and adjust naming
RDMA/core: Avoid hmm_dma_map_alloc() for virtual DMA devices
RDMA/rxe: Break endless pagefault loop for RO pages
RDMA/bnxt_re: Fix return code of bnxt_re_configure_cc
RDMA/bnxt_re: Fix missing error handling for tx_queue
RDMA/bnxt_re: Fix incorrect display of inactivity_cp in debugfs output
RDMA/mlx5: Add support for 200Gbps per lane speeds
RDMA/mlx5: Remove the redundant MLX5_IB_STAGE_UAR stage
RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction
net: mana: Add support for auxiliary device servicing events
RDMA/mana_ib: unify mana_ib functions to support any gdma device
RDMA/mana_ib: Add support of mana_ib for RNIC and ETH nic
net: mana: Probe rdma device in mana driver
RDMA/siw: replace redundant ternary operator with just rv
RDMA/umem: Separate implicit ODP initialization from explicit ODP
RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage
...
To support Multi Vports on Bare metal, increase the device config response
version. And, skip the register HW vport, and register filter steps, when
the Bare metal hostmode is set.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1747671636-5810-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Handle soc servicing events which require the rdma auxiliary device resources to
be cleaned up during a suspend, and re-initialized during a resume.
Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1746633545-17653-5-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Initialize gdma device for rdma inside mana module.
For each gdma device, initialize an auxiliary ib device.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1746633545-17653-2-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Check PF capability flag whether the 4M, 1G, and 2G pages are
supported. Add these pages sizes to mana_ib, if supported.
Define possible page sizes in enum gdma_page_type and
remove unused enum atb_page_size.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1744621234-26114-4-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc",
error queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported,
avoid spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=BDoM
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser, mlx5,
vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting in-kernel
verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism to
access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ+ap4gAKCRCFwuHvBreF
YaFHAP9wyeZCZIbnWaGcbNdbsmkEgy7aTVILRHf1NA7VSJ211gD9Ha60E+mkwtvA
i7IJ49R2BdqzKaO9oTutj2Lw+8rABwQ=
=qXhh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser,
mlx5, vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting
in-kernel verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism
to access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (73 commits)
IB/mad: Check available slots before posting receive WRs
RDMA/mana_ib: Fix integer overflow during queue creation
RDMA/mlx5: Fix calculation of total invalidated pages
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
RDMA/mlx5: Fix page_size variable overflow
RDMA/mlx5: Drop access_flags from _mlx5_mr_cache_alloc()
RDMA/mlx5: Fix cache entry update on dereg error
RDMA/mlx5: Fix MR cache initialization error flow
RDMA/mlx5: Support optional-counters binding for QPs
RDMA/mlx5: Compile fs.c regardless of INFINIBAND_USER_ACCESS config
RDMA/core: Pass port to counter bind/unbind operations
RDMA/core: Add support to optional-counters binding configuration
RDMA/core: Create and destroy rdma_counter using rdma_zalloc_drv_obj()
RDMA/mlx5: Add optional counters for RDMA_TX/RX_packets/bytes
RDMA/core: Fix use-after-free when rename device name
RDMA/bnxt_re: Support perf management counters
RDMA/rxe: Fix incorrect return value of rxe_odp_atomic_op()
RDMA/uverbs: Propagate errors from rdma_lookup_get_uobject()
RDMA/mana_ib: Handle net event for pointing to the current netdev
net: mana: Change the function signature of mana_get_primary_netdev_rcu
...
Frag allocators, such as netdev_alloc_frag(), were not designed to
work for fragsz > PAGE_SIZE.
So, switch to page pool for jumbo frames instead of using page frag
allocators. This driver is using page pool for smaller MTUs already.
Cc: stable@vger.kernel.org
Fixes: 80f6215b45 ("net: mana: Add support for jumbo frame")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/1742920357-27263-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set metadata size building the skb from xdp_buff in mana driver.
mana driver sets xdp headroom to XDP_PACKET_HEADROOM so the headroom is
large enough to contain xdp_frame and xdp metadata.
Please note this patch is just compiled tested.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250318-mvneta-xdp-meta-v2-6-b6075778f61f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad7 ("selftest: net: add proc_net_pktgen")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711ac ("selftests: net: Add test cases for link and peer netns")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429e ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to GDMA protocol, holes (zeros) are allowed at the beginning
or middle of the gdma_list_devices_resp message. The existing code
cannot properly handle this, and may miss some devices in the list.
To fix, scan the entire list until the num_of_devs are found, or until
the end of the list.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@microsoft.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741723974-1534-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Change mana_get_primary_netdev_rcu() to mana_get_primary_netdev(), and
return the ndev with refcount held. The caller is responsible for dropping
the refcount.
Also drop the check for IFF_SLAVE as it is not necessary if the upper
device is present.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1741821332-9392-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Move the more esoteric helpers for netdev instance lock to
a dedicated header. This avoids growing netdevice.h to infinity
and makes rebuilding the kernel much faster (after touching
the header with the helpers).
The main netdev_lock() / netdev_unlock() functions are used
in static inlines in netdevice.h and will probably be used
most commonly, so keep them in netdevice.h.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add more logs to assist in debugging and monitoring
driver behaviour, making it easier to identify potential
issues during development and testing.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1739842455-23899-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add polling for the kernel CQs.
Process completion events for UD/GSI QPs.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-13-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement post send and post recv for UD/GSI QPs.
Add information about posted requests into shadow queues.
Co-developed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-10-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Do not warn on missing pad_data when oob is in sgl.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-9-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce helpers to allocate queues for kernel-level use.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-4-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
gc->irq_contexts is not freeded if one of the later operations
fail.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Fixes: 8afefc3612 ("net: mana: Assigning IRQ affinity on HT cores")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Link: https://patch.msgid.link/20241209175751.287738-3-mlevitsk@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 8afefc3612 ("net: mana: Assigning IRQ affinity on HT cores")
added memory allocation in mana_gd_setup_irqs of 'irqs' but the code
doesn't free this temporary array in the success path.
This was caught by kmemleak.
Fixes: 8afefc3612 ("net: mana: Assigning IRQ affinity on HT cores")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Link: https://patch.msgid.link/20241209175751.287738-2-mlevitsk@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth: bnxt_en: support header page pool in queue API
- eth: ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth: mlxsw: use correct key block on Spectrum-4
- eth: mlx5: fix memory leak in mlx5hws_definer_calc_layout
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=nkPk
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
The current requested response version(V1) for MANA_QUERY_GF_STAT query
results in STATISTICS_FLAGS_TX_ERRORS_GDMA_ERROR value being set to
0 always.
In order to get the correct value for this counter we request the response
version to be V2.
Cc: stable@vger.kernel.org
Fixes: e1df5202e8 ("net :mana :Add remaining GDMA stats for MANA to ethtool")
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1733291300-12593-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the data pointer.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/20241022204908.511021-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the ethtool get_link and get_link_ksettings
operations. Display standard port information using ethtool.
Before the change:
$ethtool enP30832s1
> No data available
After the change:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1727674934-12130-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed,
Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----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=DZVc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
The mana_set_channels() function requires detaching the mana
driver and reattaching it with changed channel values.
During this operation if the system is low on memory, the reattach
might fail, causing the network device being down.
To avoid this we pre-allocate buffers at the beginning of set operation,
to prevent complete network loss
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1725248734-21760-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently napi_disable() gets called during rxq and txq cleanup,
even before napi is enabled and hrtimer is initialized. It causes
kernel panic.
? page_fault_oops+0x136/0x2b0
? page_counter_cancel+0x2e/0x80
? do_user_addr_fault+0x2f2/0x640
? refill_obj_stock+0xc4/0x110
? exc_page_fault+0x71/0x160
? asm_exc_page_fault+0x27/0x30
? __mmdrop+0x10/0x180
? __mmdrop+0xec/0x180
? hrtimer_active+0xd/0x50
hrtimer_try_to_cancel+0x2c/0xf0
hrtimer_cancel+0x15/0x30
napi_disable+0x65/0x90
mana_destroy_rxq+0x4c/0x2f0
mana_create_rxq.isra.0+0x56c/0x6d0
? mana_uncfg_vport+0x50/0x50
mana_alloc_queues+0x21b/0x320
? skb_dequeue+0x5f/0x80
Cc: stable@vger.kernel.org
Fixes: e1b5683ff6 ("net: mana: Move NAPI from EQ to CQ")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Currently the values of WQs for RX and TX queues for MANA devices
are hardcoded to default sizes.
Allow configuring these values for MANA devices as ringparam
configuration(get/set) through ethtool_ops.
Pre-allocate buffers at the beginning of this operation, to
prevent complete network loss in low-memory conditions.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://patch.msgid.link/1724688461-12203-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mana_hwc_rx_event_handler() / mana_hwc_handle_resp() calls
complete(&ctx->comp_event) before posting the wqe back. It's
possible that other callers, like mana_create_txq(), start the
next round of mana_hwc_send_request() before the posting of wqe.
And if the HW is fast enough to respond, it can hit no_wqe error
on the HW channel, then the response message is lost. The mana
driver may fail to create queues and open, because of waiting for
the HW response and timed out.
Sample dmesg:
[ 528.610840] mana 39d4:00:02.0: HWC: Request timed out!
[ 528.614452] mana 39d4:00:02.0: Failed to send mana message: -110, 0x0
[ 528.618326] mana 39d4:00:02.0 enP14804s2: Failed to create WQ object: -110
To fix it, move posting of rx wqe before complete(&ctx->comp_event).
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After napi_complete_done() is called when NAPI is polling in the current
process context, another NAPI may be scheduled and start running in
softirq on another CPU and may ring the doorbell before the current CPU
does. When combined with unnecessary rings when there is no need to arm
the CQ, it triggers error paths in the hardware.
This patch fixes this by calling napi_complete_done() after doorbell
rings. It limits the number of unnecessary rings when there is
no need to arm. MANA hardware specifies that there must be one doorbell
ring every 8 CQ wraparounds. This driver guarantees one doorbell ring as
soon as the number of consumed CQEs exceeds 4 CQ wraparounds. In practical
workloads, the 4 CQ wraparounds proves to be big enough that it rarely
exceeds this limit before all the napi weight is consumed.
To implement this, add a per-CQ counter cq->work_done_since_doorbell,
and make sure the CQ is armed as soon as passing 4 wraparounds of the CQ.
Cc: stable@vger.kernel.org
Fixes: e1b5683ff6 ("net: mana: Move NAPI from EQ to CQ")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1723219138-29887-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to
create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment
is affected by the alloc_size passed into napi_build_skb(). The size needs
to be aligned properly for better performance and atomic operations.
Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic
operations may panic on the skb_shinfo(skb)->dataref due to alignment fault.
To fix this bug, add proper alignment to the alloc_size calculation.
Sample panic info:
[ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce
[ 253.300900] Mem abort info:
[ 253.301760] ESR = 0x0000000096000021
[ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits
[ 253.304268] SET = 0, FnV = 0
[ 253.305172] EA = 0, S1PTW = 0
[ 253.306103] FSC = 0x21: alignment fault
Call trace:
__skb_clone+0xfc/0x198
skb_clone+0x78/0xe0
raw6_local_deliver+0xfc/0x228
ip6_protocol_deliver_rcu+0x80/0x500
ip6_input_finish+0x48/0x80
ip6_input+0x48/0xc0
ip6_sublist_rcv_finish+0x50/0x78
ip6_sublist_rcv+0x1cc/0x2b8
ipv6_list_rcv+0x100/0x150
__netif_receive_skb_list_core+0x180/0x220
netif_receive_skb_list_internal+0x198/0x2a8
__napi_poll+0x138/0x250
net_rx_action+0x148/0x330
handle_softirqs+0x12c/0x3a0
Cc: stable@vger.kernel.org
Fixes: 80f6215b45 ("net: mana: Add support for jumbo frame")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Usual collection of small improvements and fixes:
- Bug fixes and minor improvments in efa, irdma, mlx4, mlx5, rxe, hf1,
qib, ocrdma
- bnxt_re support for MSN, which is a new retransmit logic
- Initial mana support for RC qps
- Use after free bug and cleanups in iwcm
- Reduce resource usage in mlx5 when RDMA verbs features are not used
- New verb to drain shared recieve queues, similar to normal recieve
queues. This is necessary to allow ULPs a clean shutdown. Used in the
iscsi rdma target
- mlx5 support for more than 16 bits of doorbell indexes
- Doorbell moderation support for bnxt_re
- IB multi-plane support for mlx5
- New EFA adaptor PCI IDs
- RDMA_NAME_ASSIGN_TYPE_USER to hint to userspace that it shouldn't rename
the device
- A collection of hns bugs
- Fix long standing bug in bnxt_re with incorrect endian handling of
immediate data
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZpfvKQAKCRCFwuHvBreF
YXomAP46gZpGv5mlMOAXePRuKq6glNZWl3pVuwuycnlmjQcEUQD/dhQbJz0rZKBr
swuibPo83bFacfXJL7Wxd48m4G3EfgI=
=1eXu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes:
- Bug fixes and minor improvments in efa, irdma, mlx4, mlx5, rxe,
hf1, qib, ocrdma
- bnxt_re support for MSN, which is a new retransmit logic
- Initial mana support for RC qps
- Use after free bug and cleanups in iwcm
- Reduce resource usage in mlx5 when RDMA verbs features are not used
- New verb to drain shared recieve queues, similar to normal recieve
queues. This is necessary to allow ULPs a clean shutdown. Used in
the iscsi rdma target
- mlx5 support for more than 16 bits of doorbell indexes
- Doorbell moderation support for bnxt_re
- IB multi-plane support for mlx5
- New EFA adaptor PCI IDs
- RDMA_NAME_ASSIGN_TYPE_USER to hint to userspace that it shouldn't
rename the device
- A collection of hns bugs
- Fix long standing bug in bnxt_re with incorrect endian handling of
immediate data"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (65 commits)
IB/hfi1: Constify struct flag_table
RDMA/mana_ib: Set correct device into ib
bnxt_re: Fix imm_data endianness
RDMA: Fix netdev tracker in ib_device_set_netdev
RDMA/hns: Fix mbx timing out before CMD execution is completed
RDMA/hns: Fix insufficient extend DB for VFs.
RDMA/hns: Fix undifined behavior caused by invalid max_sge
RDMA/hns: Fix shift-out-bounds when max_inline_data is 0
RDMA/hns: Fix missing pagesize and alignment check in FRMR
RDMA/hns: Fix unmatch exception handling when init eq table fails
RDMA/hns: Fix soft lockup under heavy CEQE load
RDMA/hns: Check atomic wr length
RDMA/ocrdma: Don't inline statistics functions
RDMA/core: Introduce "name_assign_type" for an IB device
RDMA/qib: Fix truncation compilation warnings in qib_verbs.c
RDMA/qib: Fix truncation compilation warnings in qib_init.c
RDMA/efa: Add EFA 0xefa3 PCI ID
RDMA/mlx5: Support per-plane port IB counters by querying PPCNT register
net/mlx5: mlx5_ifc update for accessing ppcnt register of plane ports
RDMA/mlx5: Add plane index support when querying PTYS registers
...
Add mana_get_primary_netdev_rcu helper to get a primary
netdevice for a given port. When mana is used with
netvsc, the VF netdev is controlled by an upper netvsc
device. In a baremetal case, the VF netdev is the
primary device.
Use the mana_get_primary_netdev_rcu() helper in the mana_ib
to get the correct device for querying network states.
Fixes: 8b184e4f1c ("RDMA/mana_ib: Enable RoCE on port 1")
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1720705077-322-1-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function adev_release
calls kfree(madev). We shouldn't call kfree(madev) again
in the error handling path. Set 'madev' to NULL.
Fixes: a69839d432 ("net: mana: Add support for auxiliary device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240625130314.2661257-1-make24@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As defined by the MANA Hardware spec, the queue size for DMA is 4KB
minimal, and power of 2. And, the HWC queue size has to be exactly
4KB.
To support page sizes other than 4KB on ARM64, define the minimal
queue size as a macro separately from the PAGE_SIZE, which we always
assumed it to be 4KB before supporting ARM64.
Also, add MANA specific macros and update code related to size
alignment, DMA region calculations, etc.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1718655446-6576-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To cleanup rxqs in port context structures, instead of duplicating the
code, use existing function mana_cleanup_port_context() which does
the exact cleanup that's needed.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://lore.kernel.org/r/1718349548-28697-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow variable size indirection table allocation in MANA instead
of using a constant value MANA_INDIRECT_TABLE_SIZE.
The size is now derived from the MANA_QUERY_VPORT_CONFIG and the
indirection table is allocated dynamically.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/1718015319-9609-1-git-send-email-shradhagupta@linux.microsoft.com
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Process QP fatal events from the error event queue.
For that, find the QP, using QPN from the event, and then call its
event_handler. To find the QPs, store created RC QPs in an xarray.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1717754897-19858-1-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Wei Hu <weh@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
regression you have been notified of in the past weeks.
The TCP window fix will require some follow-up, already queued.
Current release - regressions:
- af_unix: fix garbage collection of embryos
Previous releases - regressions:
- af_unix: fix race between GC and receive path
- ipv6: sr: fix missing sk_buff release in seg6_input_core
- tcp: remove 64 KByte limit for initial tp->rcv_wnd value
- eth: r8169: fix rx hangup
- eth: lan966x: remove ptp traps in case the ptp is not enabled.
- eth: ixgbe: fix link breakage vs cisco switches.
- eth: ice: prevent ethtool from corrupting the channels.
Previous releases - always broken:
- openvswitch: set the skbuff pkt_type for proper pmtud support.
- tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
Misc:
- a bunch of selftests stabilization patches.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=zd2T
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite smaller than usual. Notably it includes the fix for the unix
regression from the past weeks. The TCP window fix will require some
follow-up, already queued.
Current release - regressions:
- af_unix: fix garbage collection of embryos
Previous releases - regressions:
- af_unix: fix race between GC and receive path
- ipv6: sr: fix missing sk_buff release in seg6_input_core
- tcp: remove 64 KByte limit for initial tp->rcv_wnd value
- eth: r8169: fix rx hangup
- eth: lan966x: remove ptp traps in case the ptp is not enabled
- eth: ixgbe: fix link breakage vs cisco switches
- eth: ice: prevent ethtool from corrupting the channels
Previous releases - always broken:
- openvswitch: set the skbuff pkt_type for proper pmtud support
- tcp: Fix shift-out-of-bounds in dctcp_update_alpha()
Misc:
- a bunch of selftests stabilization patches"
* tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits)
r8169: Fix possible ring buffer corruption on fragmented Tx packets.
idpf: Interpret .set_channels() input differently
ice: Interpret .set_channels() input differently
nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
net: relax socket state check at accept time.
tcp: remove 64 KByte limit for initial tp->rcv_wnd value
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
tls: fix missing memory barrier in tls_init
net: fec: avoid lock evasion when reading pps_enable
Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
testing: net-drv: use stats64 for testing
net: mana: Fix the extra HZ in mana_hwc_send_request
net: lan966x: Remove ptp traps in case the ptp is not enabled.
openvswitch: Set the skbuff pkt_type for proper pmtud support.
selftest: af_unix: Make SCM_RIGHTS into OOB data.
af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
selftests/net: use tc rule to filter the na packet
ipv6: sr: fix memleak in seg6_hmac_init_algo
af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
...
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
Change the Kconfig dependency, so this driver can be built and run on ARM64
with 4K page size.
16/64K page sizes are not supported yet.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1715632141-8089-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c945 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Erick Archer says:
====================
mana: Add flex array to struct mana_cfg_rx_steer_req_v2 (part)
The "struct mana_cfg_rx_steer_req_v2" uses a dynamically sized set of
trailing elements. Specifically, it uses a "mana_handle_t" array. So,
use the preferred way in the kernel declaring a flexible array [1].
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions).
Also, avoid the open-coded arithmetic in the memory allocator functions
[2] using the "struct_size" macro.
Moreover, use the "offsetof" helper to get the indirect table offset
instead of the "sizeof" operator and avoid the open-coded arithmetic in
pointers using the new flex member. This new structure member also allow
us to remove the "req_indir_tab" variable since it is no longer needed.
Now, it is also possible to use the "flex_array_size" helper to compute
the size of these trailing elements in the "memcpy" function.
Specifically, the first commit adds the flex member and the patches 2 and
3 refactor the consumers of the "struct mana_cfg_rx_steer_req_v2".
This code was detected with the help of Coccinelle, and audited and
modified manually. The Coccinelle script used to detect this code pattern
is the following:
virtual report
@rule1@
type t1;
type t2;
identifier i0;
identifier i1;
identifier i2;
identifier ALLOC =~ "kmalloc|kzalloc|kmalloc_node|kzalloc_node|vmalloc|vzalloc|kvmalloc|kvzalloc";
position p1;
@@
i0 = sizeof(t1) + sizeof(t2) * i1;
...
i2 = ALLOC@p1(..., i0, ...);
@script:python depends on report@
p1 << rule1.p1;
@@
msg = "WARNING: verify allocation on line %s" % (p1[0].line)
coccilib.report.print_report(p1[0],msg)
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-and-one-element-arrays [1]
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [2]
v1: https://lore.kernel.org/linux-hardening/AS8PR02MB7237974EF1B9BAFA618166C38B382@AS8PR02MB7237.eurprd02.prod.outlook.com/
v2: https://lore.kernel.org/linux-hardening/AS8PR02MB723729C5A63F24C312FC9CD18B3F2@AS8PR02MB7237.eurprd02.prod.outlook.com/
====================
Link: https://lore.kernel.org/r/AS8PR02MB72374BD1B23728F2E3C3B1A18B022@AS8PR02MB7237.eurprd02.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "req" variable is a pointer to "struct mana_cfg_rx_steer_req_v2"
and this structure ends in a flexible array:
struct mana_cfg_rx_steer_req_v2 {
[...]
mana_handle_t indir_tab[] __counted_by(num_indir_entries);
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + size * count" in
the kzalloc() function.
Moreover, use the "offsetof" helper to get the indirect table offset
instead of the "sizeof" operator and avoid the open-coded arithmetic in
pointers using the new flex member. This new structure member also allow
us to remove the "req_indir_tab" variable since it is no longer needed.
Now, it is also possible to use the "flex_array_size" helper to compute
the size of these trailing elements in the "memcpy" function.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB7237A21355C86EC0DCC0D83B8B022@AS8PR02MB7237.eurprd02.prod.outlook.com
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be
multiple of 64. So a packet slightly bigger than mtu+14, say 1536,
can be received and cause skb_over_panic.
Sample dmesg:
[ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL>
[ 5325.243689] ------------[ cut here ]------------
[ 5325.245748] kernel BUG at net/core/skbuff.c:192!
[ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60
[ 5325.302941] Call Trace:
[ 5325.304389] <IRQ>
[ 5325.315794] ? skb_panic+0x4f/0x60
[ 5325.317457] ? asm_exc_invalid_op+0x1f/0x30
[ 5325.319490] ? skb_panic+0x4f/0x60
[ 5325.321161] skb_put+0x4e/0x50
[ 5325.322670] mana_poll+0x6fa/0xb50 [mana]
[ 5325.324578] __napi_poll+0x33/0x1e0
[ 5325.326328] net_rx_action+0x12e/0x280
As discussed internally, this alignment is not necessary. To fix
this bug, remove it from the code. So oversized packets will be
marked as CQE_RX_TRUNCATED by NIC, and dropped.
Cc: stable@vger.kernel.org
Fixes: 2fbbd712ba ("net: mana: Enable RX path to handle various MTU sizes")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1712087316-20886-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Existing MANA design assigns IRQ to every CPU, including sibling
hyper-threads. This may cause multiple IRQs to be active simultaneously
in the same core and may reduce the network performance.
Improve the performance by assigning IRQ to non sibling CPUs in local
NUMA node. The performance improvement we are getting using ntttcp with
following patch is around 15 percent against existing design and
approximately 11 percent, when trying to assign one IRQ in each core
across NUMA nodes, if enough cores are present.
The change will improve the performance for the system
with high number of CPU, where number of CPUs in a node is more than
64 CPUs. Nodes with 64 CPUs or less than 64 CPUs will not be affected
by this change.
The performance study was done using ntttcp tool in Azure.
The node had 2 nodes with 32 cores each, total 128 vCPU and number of channels
were 32 for 32 RX rings.
The below table shows a comparison between existing design and new
design:
IRQ node-num core-num CPU performance(%)
1 0 | 0 0 | 0 0 | 0-1 0
2 0 | 0 0 | 1 1 | 2-3 3
3 0 | 0 1 | 2 2 | 4-5 10
4 0 | 0 1 | 3 3 | 6-7 15
5 0 | 0 2 | 4 4 | 8-9 15
...
...
25 0 | 0 12| 24 24| 48-49 12
...
32 0 | 0 15| 31 31| 62-63 12
33 0 | 0 16| 0 32| 0-1 10
...
64 0 | 0 31| 31 63| 62-63 0
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Souradeep investigated that the driver performs faster if IRQs are
spread on CPUs with the following heuristics:
1. No more than one IRQ per CPU, if possible;
2. NUMA locality is the second priority;
3. Sibling dislocality is the last priority.
Let's consider this topology:
Node 0 1
Core 0 1 2 3
CPU 0 1 2 3 4 5 6 7
The most performant IRQ distribution based on the above topology
and heuristics may look like this:
IRQ Nodes Cores CPUs
0 1 0 0-1
1 1 1 2-3
2 1 0 0-1
3 1 1 2-3
4 2 2 4-5
5 2 3 6-7
6 2 2 4-5
7 2 3 6-7
The irq_setup() routine introduced in this patch leverages the
for_each_numa_hop_mask() iterator and assigns IRQs to sibling groups
as described above.
According to [1], for NUMA-aware but sibling-ignorant IRQ distribution
based on cpumask_local_spread() performance test results look like this:
./ntttcp -r -m 16
NTTTCP for Linux 1.4.0
---------------------------------------------------------
08:05:20 INFO: 17 threads created
08:05:28 INFO: Network activity progressing...
08:06:28 INFO: Test run completed.
08:06:28 INFO: Test cycle finished.
08:06:28 INFO: ##### Totals: #####
08:06:28 INFO: test duration :60.00 seconds
08:06:28 INFO: total bytes :630292053310
08:06:28 INFO: throughput :84.04Gbps
08:06:28 INFO: retrans segs :4
08:06:28 INFO: cpu cores :192
08:06:28 INFO: cpu speed :3799.725MHz
08:06:28 INFO: user :0.05%
08:06:28 INFO: system :1.60%
08:06:28 INFO: idle :96.41%
08:06:28 INFO: iowait :0.00%
08:06:28 INFO: softirq :1.94%
08:06:28 INFO: cycles/byte :2.50
08:06:28 INFO: cpu busy (all) :534.41%
For NUMA- and sibling-aware IRQ distribution, the same test works
15% faster:
./ntttcp -r -m 16
NTTTCP for Linux 1.4.0
---------------------------------------------------------
08:08:51 INFO: 17 threads created
08:08:56 INFO: Network activity progressing...
08:09:56 INFO: Test run completed.
08:09:56 INFO: Test cycle finished.
08:09:56 INFO: ##### Totals: #####
08:09:56 INFO: test duration :60.00 seconds
08:09:56 INFO: total bytes :741966608384
08:09:56 INFO: throughput :98.93Gbps
08:09:56 INFO: retrans segs :6
08:09:56 INFO: cpu cores :192
08:09:56 INFO: cpu speed :3799.791MHz
08:09:56 INFO: user :0.06%
08:09:56 INFO: system :1.81%
08:09:56 INFO: idle :96.18%
08:09:56 INFO: iowait :0.00%
08:09:56 INFO: softirq :1.95%
08:09:56 INFO: cycles/byte :2.25
08:09:56 INFO: cpu busy (all) :569.22%
[1] https://lore.kernel.org/all/20231211063726.GA4977@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net/
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Co-developed-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Small cycle, with some typical driver updates
- General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and bnxt_re
- Many small siw cleanups without an overeaching theme
- Debugfs stats for hns
- Fix a TX queue timeout in IPoIB and missed locking of the mcast list
- Support more features of P7 devices in bnxt_re including a new work
submission protocol
- CQ interrupts for MANA
- netlink stats for erdma
- EFA multipath PCI support
- Fix Incorrect MR invalidation in iser
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZaCQDQAKCRCFwuHvBreF
YemEAQCTGebv0k2hbocDOmKml5awt8j9aDJX3aO7Zpfi0AYUtwEAzk+kgN4yAo+B
Vinvpu171zry+QvmGJsXv2mtZkXH6QY=
=HT3p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Small cycle, with some typical driver updates:
- General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and
bnxt_re
- Many small siw cleanups without an overeaching theme
- Debugfs stats for hns
- Fix a TX queue timeout in IPoIB and missed locking of the mcast
list
- Support more features of P7 devices in bnxt_re including a new work
submission protocol
- CQ interrupts for MANA
- netlink stats for erdma
- EFA multipath PCI support
- Fix Incorrect MR invalidation in iser"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/bnxt_re: Fix error code in bnxt_re_create_cq()
RDMA/efa: Add EFA query MR support
IB/iser: Prevent invalidating wrong MR
RDMA/erdma: Add hardware statistics support
RDMA/erdma: Introduce dma pool for hardware responses of CMDQ requests
IB/iser: iscsi_iser.h: fix kernel-doc warning and spellos
RDMA/mana_ib: Add CQ interrupt support for RAW QP
RDMA/mana_ib: query device capabilities
RDMA/mana_ib: register RDMA device with GDMA
RDMA/bnxt_re: Fix the sparse warnings
RDMA/bnxt_re: Fix the offset for GenP7 adapters for user applications
RDMA/bnxt_re: Share a page to expose per CQ info with userspace
RDMA/bnxt_re: Add UAPI to share a page with user space
IB/ipoib: Fix mcast list locking
RDMA/mlx5: Expose register c0 for RDMA device
net/mlx5: E-Switch, expose eswitch manager vport
net/mlx5: Manage ICM type of SW encap
RDMA/mlx5: Support handling of SW encap ICM area
net/mlx5: Introduce indirect-sw-encap ICM properties
RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters
...
Software client needs to register with the RDMA management interface on
the SoC to access more features, including querying device capabilities
and RC queue pair.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1702692255-23640-2-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This patch allows to assign and poll more than one EQ on the same
msix index.
It is achieved by introducing a list of attached EQs in each IRQ context.
It also removes the existing msix_index map that tried to ensure that there
is only one EQ at each msix_index.
This patch exports symbols for creating EQs from other MANA kernel modules.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a spelling mistake in struct field hc_tx_err_sqpdid_enforecement.
Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231128095304.515492-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link page pool instances to netdev for the drivers which
already link to NAPI. Unless the driver is doing something
very weird per-NAPI should imply per-netdev.
Add netsec as well, Ilias indicates that it fits the mold.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend performance counter stats in 'ethtool -S <interface>'
for MANA VF to include all GDMA stat counter.
Tested-on: Ubuntu22
Testcases:
1. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-Synthetic
2. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-SRIOV
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/1700830950-803-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch uses a helper function for assignment of xdp_features.
This change simplifies backports.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1698430011-21562-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Handle the case when GSO SKB linear length is too large.
MANA NIC requires GSO packets to put only the header part to SGE0,
otherwise the TX queue may stop at the HW level.
So, use 2 SGEs for the skb linear part which contains more than the
packet header.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sizeof(struct hop_jumbo_hdr) is not part of tso_bytes, so remove
the subtraction from header size.
Cc: stable@vger.kernel.org
Fixes: bd7fc6e195 ("net: mana: Add new MANA VF performance counters for easier troubleshooting")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For an unknown TX CQE error type (probably from a newer hardware),
still free the SKB, update the queue tail, etc., otherwise the
accounting will be wrong.
Also, TX errors can be triggered by injecting corrupted packets, so
replace the WARN_ONCE to ratelimited error logging.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extended performance counter stats in 'ethtool -S <interface>'
for MANA VF to include GDMA tx LSO packets and bytes count.
Tested-on: Ubuntu22
Testcases:
1. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-Synthetic
2. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-SRIOV
3. Validated the GDMA stat packets and byte counters
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
