For non-PREEMPT_RT kernels, the IRQ handler runs with interrupts
disabled, allowing the use of napi_schedule_irqoff() to save a pair of
local_irq_{save,restore} operations. For PREEMPT_RT kernels,
napi_schedule_irqoff() behaves identically to napi_schedule().
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260407-macb-napi-irqoff-v1-1-61bec60047d7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current implementation, the suspend/resume path frees the
existing IRQ handler and sets up a dedicated WoL IRQ handler, then
restores the original handler upon resume. This approach is not used
by any other Ethernet driver and unnecessarily complicates the
suspend/resume process. After adjusting the IRQ handler in the previous
patches, we can now handle WoL interrupts without introducing any
overhead in the TX/RX hot path. Therefore, the dedicated WoL IRQ
handler is removed.
I have verified WoL functionality on my AMD ZynqMP board using the
following steps:
root@amd-zynqmp:~# ifconfig end0 192.168.3.3
root@amd-zynqmp:~# ethtool -s end0 wol a
root@amd-zynqmp:~# echo mem >/sys/power/state
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260402-macb-irq-v2-4-942d98ab1154@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current code, the IRQ handler checks each IRQ event sequentially.
Since most IRQ events are related to TX/RX operations, while other
events occur infrequently, this approach introduces unnecessary overhead
in the hot path for TX/RX processing. This patch reduces such overhead
by extracting the handling of all non-TX/RX events into a new function
and consolidating these events under a new flag. As a result, only a
single check is required to determine whether any non-TX/RX events have
occurred. If such events exist, the handler jumps to the new function.
This optimization reduces four conditional checks to one and prevents
the instruction cache from being polluted with rarely used code in the
hot path.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260402-macb-irq-v2-3-942d98ab1154@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current implementation includes several occurrences of the
following pattern:
if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
queue_writel(queue, ISR, value);
Introduces a helper function to consolidate these repeated code
segments. No functional changes are made.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260402-macb-irq-v2-2-942d98ab1154@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver currently duplicates the logic of napi_schedule() primarily
to include additional debug information. However, these debug details
are not essential for a specific driver and can be effectively obtained
through existing tracepoints in the networking core, such as
/sys/kernel/tracing/events/napi/napi_poll. Therefore, this patch
replaces the open-coded implementation with napi_schedule() to
simplify the driver's code.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260402-macb-irq-v2-1-942d98ab1154@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The additional resources allocated with clk_register_fixed_rate() need
to be released with clk_unregister_fixed_rate(), otherwise they are lost.
Fixes: 83a77e9ec4 ("net: macb: Added PCI wrapper for Platform Driver.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260330184542.626619-2-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
platform_device_unregister() may still want to use the registered clks
during runtime resume callback.
Note that there is a commit d82d5303c4 ("net: macb: fix use after free
on rmmod") that addressed the similar problem of clk vs platform device
unregistration but just moved the bug to another place.
Save the pointers to clks into local variables for reuse after platform
device is unregistered.
BUG: KASAN: use-after-free in clk_prepare+0x5a/0x60
Read of size 8 at addr ffff888104f85e00 by task modprobe/597
CPU: 2 PID: 597 Comm: modprobe Not tainted 6.1.164+ #114
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xba
print_report+0x17f/0x496
kasan_report+0xd9/0x180
clk_prepare+0x5a/0x60
macb_runtime_resume+0x13d/0x410 [macb]
pm_generic_runtime_resume+0x97/0xd0
__rpm_callback+0xc8/0x4d0
rpm_callback+0xf6/0x230
rpm_resume+0xeeb/0x1a70
__pm_runtime_resume+0xb4/0x170
bus_remove_device+0x2e3/0x4b0
device_del+0x5b3/0xdc0
platform_device_del+0x4e/0x280
platform_device_unregister+0x11/0x50
pci_device_remove+0xae/0x210
device_remove+0xcb/0x180
device_release_driver_internal+0x529/0x770
driver_detach+0xd4/0x1a0
bus_remove_driver+0x135/0x260
driver_unregister+0x72/0xb0
pci_unregister_driver+0x26/0x220
__do_sys_delete_module+0x32e/0x550
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
</TASK>
Allocated by task 519:
kasan_save_stack+0x2c/0x50
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x8e/0x90
__clk_register+0x458/0x2890
clk_hw_register+0x1a/0x60
__clk_hw_register_fixed_rate+0x255/0x410
clk_register_fixed_rate+0x3c/0xa0
macb_probe+0x1d8/0x42e [macb_pci]
local_pci_probe+0xd7/0x190
pci_device_probe+0x252/0x600
really_probe+0x255/0x7f0
__driver_probe_device+0x1ee/0x330
driver_probe_device+0x4c/0x1f0
__driver_attach+0x1df/0x4e0
bus_for_each_dev+0x15d/0x1f0
bus_add_driver+0x486/0x5e0
driver_register+0x23a/0x3d0
do_one_initcall+0xfd/0x4d0
do_init_module+0x18b/0x5a0
load_module+0x5663/0x7950
__do_sys_finit_module+0x101/0x180
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 597:
kasan_save_stack+0x2c/0x50
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x106/0x180
__kmem_cache_free+0xbc/0x320
clk_unregister+0x6de/0x8d0
macb_remove+0x73/0xc0 [macb_pci]
pci_device_remove+0xae/0x210
device_remove+0xcb/0x180
device_release_driver_internal+0x529/0x770
driver_detach+0xd4/0x1a0
bus_remove_driver+0x135/0x260
driver_unregister+0x72/0xb0
pci_unregister_driver+0x26/0x220
__do_sys_delete_module+0x32e/0x550
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Fixes: d82d5303c4 ("net: macb: fix use after free on rmmod")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260330184542.626619-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
USRIO is disabled on this platform, drop its inherited usrio config.
We will end up with MACB_CAPS_USRIO_DISABLED on this platform:
- We have no config->usrio so macb_configure_caps() deduces that the
feature is disabled.
- Anecdotally, we would also land in the runtime detection codepath
that reads DCFG1.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-stillness-undertake-d83054057b8d@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bp->usrio is copied directly from dt_conf->usrio in macb_probe().
If dt_conf->usrio is NULL, we do not want to land in USRIO write
codepaths which dereference bp->usrio. Inherit automatically
MACB_CAPS_USRIO_DISABLED to avoid those.
This means a macb_config that wants to disable usrio can simply drop
its .usrio field, rather than add the disabled capability explicitly.
Nit: drop the dt_conf NULL check because the pointer is always valid.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-husband-cape-ec4945b9184c@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCFG1 (design config 1 register) carries a bit indicating whether User
I/O feature has been enabled or not. The MACB/GEM driver has a cap flag
indicating that HW has the feature disabled (default is enabled). Add
the missing connection between DCFG1 bit and MACB_CAPS_USRIO_DISABLED.
Indirect impact: avoid useless writel() on USERIO register; this is not
an important fix because USERIO is anyway read-only when feature is
disabled.
If for some reason a compatible sets USRIO_DISABLED but DCFG1 indicates
it is enabled, we still keep the disabled capability flag. This ensures
we don't break "cdns,np4-macb" that sets the flag from compatible match
data.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-compactly-glue-f426a2e68904@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ptp portion of this driver controls the tsu's timer using the
controls for "increment mode", which is not compatible with the hardware
trying to control it via the gem_tsu_inc_ctrl and gem_tsu_ms inputs in
"timer adjust mode". Abort probe if the property signalling that the
relevant signals have been wired up is present.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-facebook-chop-cf792c53f1da@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tsu_clk is grabbed during probe, so doesn't need to be re-grabbed here.
pclk is mandatory, probe will fail if it is err/NULL, so there's no need
to check it here or have a !pclk 3rd arm. Simplify gem_get_tsu_rate() to
account for these facts.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-hazing-penniless-14ba803efbb6@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Candence GEM IP has a configuration parameter which determines the
source of the clock used for the timestamp unit (if it is enabled),
switching it between using the pclk and a dedicated input.
When ptp support was added to the macb driver, a new tsu_clk was added
to represent the dedicated input. While this is understandable, I think
it is bug prone and that the tsu_clk should represent whatever clock is
used for the timestamper and not just that specific input.
>From a driver point of view, the benefit of taking the conceptual
approach is avoiding misconfiguring the driver when the hardware
supports ptp (and it is set as a capability in the relevant per-device
structure) but no tsu_clk is provided in devicetree. At the moment, the
timestamper will be registered and programmed with an increment that
reflects the pclk in these cases, but will malfunction if the pclk and
tsu_clk frequencies do not match. Obviously, this means the devicetree
incorrectly represents the hardware, but this change in approach would
make the driver more resilient without meaningfully impacting correctly
described users.
Out of the devices that claim MACB_CAPS_GEM_HAS_PTP the fu540, mpfs,
sama5d2 and sama7g5-emac (but not sama7g5-gem) are at risk of having
this problem with the in-kernel devicetrees. mpfs and sama7g5-emac
have been confirmed to be incorrect, and sama5d2 is correct. It may be
that the other platforms actually do use the pclk for the timestamper
(either by supplying pclk to the tsu_clk input of the IP, or by having
the IP block configured to use pclk instead of the tsu_clk input), but
at least two are wrong, as they do not use pclk for the tsu_clk, so the
driver is registering the ptp clock incorrectly.
Add a warning if no tsu_clk is provided on a platform that uses the
timerstamper, to encourage people to specifically provide a tsu_clk and
avoid silently registering the timerstamper with the wrong clock. If the
pclk is actually used, it can be provided as a tsu_clk for improved
clarity in devicetrees.
While this changes the meaning of the devicetree property, it is
backwards compatible as there's no functional change for platforms that
didn't provide a tsu_clk and the changed meaning of providing a tsu_clk
in the devicetree does not impact platforms that already provided one as
the decision about the tsu clock source is at IP instantiation time
rather than at runtime, so there's no driver behaviour that needs to
change based on the input to the IP used for the timestamping unit.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-dust-revision-368053e82d0e@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On mpfs the driver needs to make sure the tsu clock source is not the
fabric, as this requires that the hardware is in Timer Adjust mode,
which is not compatible with the linux driver trying to control the
hardware. It is unlikely that this will be set, as the peripheral is
reset during probe, but if the resets are not provided in devicetree
it's probable that this bit is set incorrectly, as U-Boot's macb driver
has the same issue with using usrio settings for at91 platforms as the
default.
Fixes: 8aad66aa59 ("net: macb: add polarfire soc reset support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-excavate-jester-798e7cfe02b5@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
USRIO is disabled on this platform, having a pointer to a usrio config
structure doesn't actually do anything other than look weird.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-passover-rimless-73c19c67d94b@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The USRIO based refclk selection code abuses a capability flag to set
the refclk to an external source based on match data/compatible on
sama7g5-emac and use an internal source for the gmac.
Ryan previously added a property in an attempt to decouple the refclk
source from the compatible, because this is not fixed by compatible
and there's variance based on the choices made by board designers.
Originally when Ryan added it, he removed the capability flag entirely
from match data, but this changed the default for the sama7g5-emac and
the removal had to be reverted for these devices. Because these devices
default to an external refclk, and the current property is only capable
of communicating external refclks, there's no way to make the
sama7g5-emac use an internal refclk.
Additionally, this property has no limiting based on compatible, and
if used on a platform with an external refclk that is not controlled
by USRIO the capability would be erroneously set. Because of the reuse
of the at91_default_usrio struct by non-at91 devices, this could cause
the refclk bit to be set in error, on a system where the refclk is
externally provided without usrio settings being required.
Change the new capability flag so that it actually represents the
hardware being capable of controlling the refclk source via USRIO,
and move the selection of default behaviour into the macb_usrio_config
struct provided as part of match data.
Modify the devicetree code to support a new property,
"cdns,refclk-source" which will support devices with either default,
retaining support for "cdns,refclk-external" for compatibility reasons.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-tarantula-bullring-6ac44b39dd52@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While trying to rework the internal/external refclk selection on
sama7g5, Ryan and I noticed that the sama7g5 was "overloading" the
meaning of MACB_CAPS_USRIO_HAS_CLKEN, using it differently to how it was
originally intended.
Originally, on the macb hardware on sam9620 et al,
MACB_CAPS_USRIO_HAS_CLKEN represented the hardware having a bit that
needed to be set to turn on the input clock to the transceivers. The
sama7g5 doesn't have this bit, so for some reason the decision was made
to reuse this capability flag to control selection of internal/external
references.
Split the caps in two, so that capabilities do what they say on the tin,
and allow reworking the refclk selection handling without impacting the
older devices that use MACB_CAPS_USRIO_CLKEN for its original purpose.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-gradient-grading-b23b9e6ef9ff@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Calling this structure macb_default_usrio is misleading, I believe, as
it implies that it should be used if your platform has nothing special
to do in usrio. Since usrio is platform dependent, the default here is
probably for each usrio to do nothing, with the macb documentation I
have access to prescribing no standard behaviour here. We noticed that
this was problematic because on mpfs, a bit that macb_default_usrio
sets to deal with the MII mode actually changes the source for the
tsu_clk to something with how the majority of mpfs devices are actually
configured!
Rename it to at91_default_usrio, since that's where the values actually
come from for these. I have no idea if any of the other platforms that
use the default actually copied at91's usrio configuration or if they
have usrio configurations where what the driver does has no impact.
Gate touching these bits behind a capability, like the clken refclock
usrio knob, so that platforms without the MII mode stuff can avoid
running this code.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-landowner-preformed-2922ce736337@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 0ae998c4ef ("net: macb: Clean up the .usrio settings in
macb_config instances") was a misguided attempt to clean up the driver
that actually just propagated problematic code. The default for usrio is
actually no usrio, and already there are issues with people using the
problematically named "macb_default_usrio" on platforms where the usrio
does not have this so-called default behaviour. usrio is platform
specific and using the default at91 usrio settings should be opt-in
only. Revert the "cleanup" patch.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260325-rundown-unrushed-dd82c9f5c56c@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a potential mismatch between the memory reserved for statistics
and the amount of memory written.
gem_get_sset_count() correctly computes the number of stats based on the
active queues, whereas gem_get_ethtool_stats() indiscriminately copies
data using the maximum number of queues, and in the case the number of
active queues is less than MACB_MAX_QUEUES, this results in a OOB write
as observed in the KASAN splat.
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78
[macb]
Write of size 760 at addr ffff80008080b000 by task ethtool/1027
CPU: [...]
Tainted: [E]=UNSIGNED_MODULE
Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
print_report+0x384/0x5e0
kasan_report+0xa0/0xf0
kasan_check_range+0xe8/0x190
__asan_memcpy+0x54/0x98
gem_get_ethtool_stats+0x54/0x78 [macb
926c13f3af83b0c6fe64badb21ec87d5e93fcf65]
dev_ethtool+0x1220/0x38c0
dev_ioctl+0x4ac/0xca8
sock_do_ioctl+0x170/0x1d8
sock_ioctl+0x484/0x5d8
__arm64_sys_ioctl+0x12c/0x1b8
invoke_syscall+0xd4/0x258
el0_svc_common.constprop.0+0xb4/0x240
do_el0_svc+0x48/0x68
el0_svc+0x40/0xf8
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8
The buggy address belongs to a 1-page vmalloc region starting at
0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff00000a333000 pfn:0xa333
flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff)
raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
Fix it by making sure the copied size only considers the active number of
queues.
Fixes: 512286bbd4 ("net: macb: Added some queue statistics")
Signed-off-by: Paolo Valerio <pvalerio@redhat.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260323191634.2185840-1-pvalerio@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Access to net_device::ip_ptr and its associated members must be
protected by an RCU lock. Since we are modifying this piece of code,
let's also move it to execute only when WAKE_ARP is enabled.
To minimize the duration of the RCU lock, a local variable is used to
temporarily store the IP address. This change resolves the following
RCU check warning:
WARNING: suspicious RCU usage
7.0.0-rc3-next-20260310-yocto-standard+ #122 Not tainted
-----------------------------
drivers/net/ethernet/cadence/macb_main.c:5944 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/518:
#0: ffff000803ab1408 (sb_writers#5){.+.+}-{0:0}, at: vfs_write+0xf8/0x368
#1: ffff0008090bf088 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xbc/0x1c8
#2: ffff00080098d588 (kn->active#70){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xcc/0x1c8
#3: ffff800081c84888 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0x1ec/0x290
#4: ffff0008009ba0f8 (&dev->mutex){....}-{4:4}, at: device_suspend+0x118/0x4f0
stack backtrace:
CPU: 3 UID: 0 PID: 518 Comm: rtcwake Not tainted 7.0.0-rc3-next-20260310-yocto-standard+ #122 PREEMPT
Hardware name: ZynqMP ZCU102 Rev1.1 (DT)
Call trace:
show_stack+0x24/0x38 (C)
__dump_stack+0x28/0x38
dump_stack_lvl+0x64/0x88
dump_stack+0x18/0x24
lockdep_rcu_suspicious+0x134/0x1d8
macb_suspend+0xd8/0x4c0
device_suspend+0x218/0x4f0
dpm_suspend+0x244/0x3a0
dpm_suspend_start+0x50/0x78
suspend_devices_and_enter+0xec/0x560
pm_suspend+0x194/0x290
state_store+0x110/0x158
kobj_attr_store+0x1c/0x30
sysfs_kf_write+0xa8/0xd0
kernfs_fop_write_iter+0x11c/0x1c8
vfs_write+0x248/0x368
ksys_write+0x7c/0xf8
__arm64_sys_write+0x28/0x40
invoke_syscall+0x4c/0xe8
el0_svc_common+0x98/0xf0
do_el0_svc+0x28/0x40
el0_svc+0x54/0x1e0
el0t_64_sync_handler+0x84/0x130
el0t_64_sync+0x198/0x1a0
Fixes: 0cb8de39a7 ("net: macb: Add ARP support to WOL")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20260318-macb-irq-v2-2-f1179768ab24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devm_free_irq() and devm_request_irq() functions should not be
executed in an atomic context.
During device suspend, all userspace processes and most kernel threads
are frozen. Additionally, we flush all tx/rx status, disable all macb
interrupts, and halt rx operations. Therefore, it is safe to split the
region protected by bp->lock into two independent sections, allowing
devm_free_irq() and devm_request_irq() to run in a non-atomic context.
This modification resolves the following lockdep warning:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 501, name: rtcwake
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 0
7 locks held by rtcwake/501:
#0: ffff0008038c3408 (sb_writers#5){.+.+}-{0:0}, at: vfs_write+0xf8/0x368
#1: ffff0008049a5e88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xbc/0x1c8
#2: ffff00080098d588 (kn->active#70){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xcc/0x1c8
#3: ffff800081c84888 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0x1ec/0x290
#4: ffff0008009ba0f8 (&dev->mutex){....}-{4:4}, at: device_suspend+0x118/0x4f0
#5: ffff800081d00458 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x48
#6: ffff0008031fb9e0 (&bp->lock){-.-.}-{3:3}, at: macb_suspend+0x144/0x558
irq event stamp: 8682
hardirqs last enabled at (8681): [<ffff8000813c7d7c>] _raw_spin_unlock_irqrestore+0x44/0x88
hardirqs last disabled at (8682): [<ffff8000813c7b58>] _raw_spin_lock_irqsave+0x38/0x98
softirqs last enabled at (7322): [<ffff8000800f1b4c>] handle_softirqs+0x52c/0x588
softirqs last disabled at (7317): [<ffff800080010310>] __do_softirq+0x20/0x2c
CPU: 1 UID: 0 PID: 501 Comm: rtcwake Not tainted 7.0.0-rc3-next-20260310-yocto-standard+ #125 PREEMPT
Hardware name: ZynqMP ZCU102 Rev1.1 (DT)
Call trace:
show_stack+0x24/0x38 (C)
__dump_stack+0x28/0x38
dump_stack_lvl+0x64/0x88
dump_stack+0x18/0x24
__might_resched+0x200/0x218
__might_sleep+0x38/0x98
__mutex_lock_common+0x7c/0x1378
mutex_lock_nested+0x38/0x50
free_irq+0x68/0x2b0
devm_irq_release+0x24/0x38
devres_release+0x40/0x80
devm_free_irq+0x48/0x88
macb_suspend+0x298/0x558
device_suspend+0x218/0x4f0
dpm_suspend+0x244/0x3a0
dpm_suspend_start+0x50/0x78
suspend_devices_and_enter+0xec/0x560
pm_suspend+0x194/0x290
state_store+0x110/0x158
kobj_attr_store+0x1c/0x30
sysfs_kf_write+0xa8/0xd0
kernfs_fop_write_iter+0x11c/0x1c8
vfs_write+0x248/0x368
ksys_write+0x7c/0xf8
__arm64_sys_write+0x28/0x40
invoke_syscall+0x4c/0xe8
el0_svc_common+0x98/0xf0
do_el0_svc+0x28/0x40
el0_svc+0x54/0x1e0
el0t_64_sync_handler+0x84/0x130
el0t_64_sync+0x198/0x1a0
Fixes: 558e35ccfe ("net: macb: WoL support for GEM type of Ethernet controller")
Cc: stable@vger.kernel.org
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260318-macb-irq-v2-1-f1179768ab24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If hardware doesn't support RX Flow Filters, rx_fs_lock spinlock is not
initialized leading to the following assertion splat triggerable via
set_rxnfc callback.
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 1 PID: 949 Comm: syz.0.6 Not tainted 6.1.164+ #113
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106
assign_lock_key kernel/locking/lockdep.c:974 [inline]
register_lock_class+0x141b/0x17f0 kernel/locking/lockdep.c:1287
__lock_acquire+0x74f/0x6c40 kernel/locking/lockdep.c:4928
lock_acquire kernel/locking/lockdep.c:5662 [inline]
lock_acquire+0x190/0x4b0 kernel/locking/lockdep.c:5627
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x33/0x50 kernel/locking/spinlock.c:162
gem_del_flow_filter drivers/net/ethernet/cadence/macb_main.c:3562 [inline]
gem_set_rxnfc+0x533/0xac0 drivers/net/ethernet/cadence/macb_main.c:3667
ethtool_set_rxnfc+0x18c/0x280 net/ethtool/ioctl.c:961
__dev_ethtool net/ethtool/ioctl.c:2956 [inline]
dev_ethtool+0x229c/0x6290 net/ethtool/ioctl.c:3095
dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
A more straightforward solution would be to always initialize rx_fs_lock,
just like rx_fs_list. However, in this case the driver set_rxnfc callback
would return with a rather confusing error code, e.g. -EINVAL. So deny
set_rxnfc attempts directly if the RX filtering feature is not supported
by hardware.
Fixes: ae8223de3d ("net: macb: Added support for RX filtering")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260316103826.74506-2-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pic64hpsc doesn't have the USRIO register so MACB_CAPS_USRIO_DISABLED is
used.
pic64hpsc does support PTP and has the timestamping unit so
MACB_CAPS_GEM_HAS_PTP is used.
jumbo_max_len is set to 16383 (0x3FFF) as reported by the DCFG2 register
bits 0..13. The JML register also has a default value of 0x3FFF.
dma_burst_length is set to 16 because that's what most other platforms
use and it worked for me so far. There is one other mode where bursts of
up to 256 are allowed but this might impact negatively other masters on
the NOC. The register default value is 4 (bursts up to 4).
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260313140610.3681752-4-charles.perry@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX buffers for GEM can have a maximum size of 16320 bytes
(0xff in the RXBS field of the DMACFG register means 255*64 =
16320 bytes).
The GEM IP has configurable maximum jumbo frame length that can go up to
16383. The actual value for this limit can be found in the
"jumbo_max_length" field (bits 0..13) of the DCFG2 register.
Currently, the macb driver doesn't use the DCFG2 register when
determining the max MTU, instead an hardcoded value (jumbo_max_len in
struct macb_config) is used for each platform. Right now the maximum
value for jumbo_max_len is 10240 (0x2800).
GEM uses one buffer per packet which means that one buffer must allow
room for the max MTU plus L2 encapsulation and alignment. This is a
limitation of the driver.
This commit adds a limit to max_mtu and rx_buffer_size so that the RXBS
field can never overflow when a large MTU is used.
With this commit, it is now possible to add new platforms with a
jumbo_max_len of 16383 so that the hardware properties of each IP can be
properly captured in struct macb_config.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260313140610.3681752-3-charles.perry@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most platforms using GEM in SGMII mode use in-band autonegotiation
because it is on by default in GEM's 1G PCS and is always on since
commit e276e5e40e ("net: macb: Disable PCS auto-negotiation for SGMII
fixed-link mode"). Leave it on if possible using the "default_an_inband"
flag of "struct phylink_config" so that platforms that lack in-band
autonegotiation configurability at the PHY do not break with commit
1338cfef1f ("net: macb: fix SGMII with inband aneg disabled") which
will turn off in-band autoneg for non hot pluggable PHYs.
Once the majority of the PHY drivers that support SGMII have the
->config_inband() callback, this commit could be reverted so that non
hot pluggable PHY use outband negotiation with macb, like its the case
for other MACs.
Fixes: 1338cfef1f ("net: macb: fix SGMII with inband aneg disabled")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Closes: https://lore.kernel.org/r/20260304-nebulizer-rounding-40fbc81a2ba1@spud
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260313142140.4040647-1-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On certain platforms, such as AMD Versal boards, the tx/rx queue pointer
registers are cleared after suspend, and the rx queue pointer register
is also disabled during suspend if WOL is enabled. Previously, we assumed
that these registers would be restored by macb_mac_link_up(). However,
in commit bf9cf80cab, macb_init_buffers() was moved from
macb_mac_link_up() to macb_open(). Therefore, we should call
macb_init_buffers() to reinitialize the tx/rx queue pointer registers
during resume.
Due to the reset of these two registers, we also need to adjust the
tx/rx rings accordingly. The tx ring will be handled by
gem_shuffle_tx_rings() in macb_mac_link_up(), so we only need to
initialize the rx ring here.
Fixes: bf9cf80cab ("net: macb: Fix tx/rx malfunction after phy link down and up")
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Quanyang Wang <quanyang.wang@windriver.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260312-macb-versal-v1-2-467647173fa4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract the initialization code for the GEM RX ring into a new function.
This change will be utilized in a subsequent patch. No functional changes
are introduced.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260312-macb-versal-v1-1-467647173fa4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All instances of macb_config currently have the .usrio set, but most of
them use &macb_default_usrio. In fact, there is no need to duplicate
this across all macb_config instances. Remove the .usrio setting from
instances that use &macb_default_usrio, and ensure that the default is
selected at runtime when no other value is explicitly set.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260310-macb-cleanup-v1-3-928c1a91a7dc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All instances of macb_config currently have the .init field set, but most
of them use macb_init(). In fact, there is no need to duplicate this
across all macb_config instances. Introduce a new macb_init() function
that executes the specific .init if it is set; otherwise, it runs a
default initialization function.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260310-macb-cleanup-v1-2-928c1a91a7dc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All instances of macb_config currently have .clk_init set, but most of
them use macb_clk_init(). In fact, there is no need to duplicate this
across all macb_config instances. Introduce a new macb_clk_init()
function that executes the specific .clk_init if it is set; otherwise,
it runs the default clock initialization function.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260310-macb-cleanup-v1-1-928c1a91a7dc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board,
the rootfs may take an extended time to recover after a suspend.
Upon investigation, it was determined that the issue originates from a
problem in the macb driver.
According to the Zynq UltraScale TRM [1], when transmit is disabled,
the transmit buffer queue pointer resets to point to the address
specified by the transmit buffer queue base address register.
In the current implementation, the code merely resets `queue->tx_head`
and `queue->tx_tail` to '0'. This approach presents several issues:
- Packets already queued in the tx ring are silently lost,
leading to memory leaks since the associated skbs cannot be released.
- Concurrent write access to `queue->tx_head` and `queue->tx_tail` may
occur from `macb_tx_poll()` or `macb_start_xmit()` when these values
are reset to '0'.
- The transmission may become stuck on a packet that has already been sent
out, with its 'TX_USED' bit set, but has not yet been processed. However,
due to the manipulation of 'queue->tx_head' and 'queue->tx_tail',
`macb_tx_poll()` incorrectly assumes there are no packets to handle
because `queue->tx_head == queue->tx_tail`. This issue is only resolved
when a new packet is placed at this position. This is the root cause of
the prolonged recovery time observed for the NFS root filesystem.
To resolve this issue, shuffle the tx ring and tx skb array so that
the first unsent packet is positioned at the start of the tx ring.
Additionally, ensure that updates to `queue->tx_head` and
`queue->tx_tail` are properly protected with the appropriate lock.
[1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm
Fixes: bf9cf80cab ("net: macb: Fix tx/rx malfunction after phy link down and up")
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260307-zynqmp-v2-1-6ef98a70e1d0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set MACB_CAPS_EEE for the Mobileye EyeQ5 GEM instance. EEE has been
verified on EyeQ5 hardware using a loopback setup with ethtool
--show-eee confirming EEE active on both ends at 100baseT/Full and
1000baseT/Full.
Tested-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260304105432.631186-6-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set MACB_CAPS_EEE for the Raspberry Pi 5 RP1 southbridge
(Cadence GEM_GXL rev 0x00070109 paired with BCM54213PE PHY).
EEE has been verified on RP1 hardware: the LPI counter registers
at 0x270-0x27c return valid data, the TXLPIEN bit in NCR (bit 19)
controls LPI transmission correctly, and ethtool --show-eee reports
the negotiated state after link-up.
Other GEM variants that share the same LPI register layout (SAMA5D2,
SAME70, PIC32CZ) can be enabled by adding MACB_CAPS_EEE to their
respective config entries once tested.
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260304105432.631186-5-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement get_eee and set_eee ethtool ops for GEM as simple passthroughs
to phylink_ethtool_get_eee() and phylink_ethtool_set_eee().
No MACB_CAPS_EEE guard is needed: phylink returns -EOPNOTSUPP from both
ops when mac_supports_eee is false, which is the case when
lpi_capabilities and lpi_interfaces are not populated. Those fields are
only set when MACB_CAPS_EEE is present (previous patch), so phylink
already handles the unsupported case correctly.
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260304105432.631186-4-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GEM MAC has hardware LPI registers (NCR bit 19: TXLPIEN) but no
built-in idle timer, so asserting TXLPIEN blocks all TX immediately
with no automatic wake. A software idle timer is required, as noted
in Microchip documentation (section 40.6.19): "It is best to use
firmware to control LPI."
Implement phylink managed EEE using the mac_enable_tx_lpi and
mac_disable_tx_lpi callbacks:
- macb_tx_lpi_set(): sets or clears TXLPIEN; requires bp->lock to be
held by the caller (asserted with lockdep_assert_held). Returns bool
indicating whether the register actually changed, avoiding redundant
writes and unnecessary udelay on the xmit fast path.
- macb_tx_lpi_work_fn(): delayed_work handler that enters LPI if all
TX queues are idle and EEE is still active. Takes bp->lock with
irqsave before calling macb_tx_lpi_set().
- macb_tx_lpi_schedule(): arms the work timer using the LPI timer
value provided by phylink (default 250 ms). Called from
macb_tx_complete() after each TX drain so the idle countdown
restarts whenever the ring goes quiet.
- macb_tx_lpi_wake(): called from macb_start_xmit() under bp->lock,
immediately before TSTART. Returns early if eee_active is false to
avoid a register read on the common path when EEE is disabled.
Clears TXLPIEN and applies a 50 us udelay for PHY wake (IEEE
802.3az Tw_sys_tx is 16.5 us for 1000BASE-T / 30 us for
100BASE-TX; GEM has no hardware enforcement). Only delays when
TXLPIEN was actually set. The delay is placed after tx_head is
advanced so the work_fn's queue-idle check sees a non-empty ring
and cannot race back into LPI before the frame is transmitted.
- mac_enable_tx_lpi: stores the timer and sets eee_active under
bp->lock, then defers the first LPI entry by 1 second per IEEE
802.3az section 22.7a.
- mac_disable_tx_lpi: cancels the work (sync, without the lock to
avoid deadlock with the work_fn), then takes bp->lock to clear
eee_active and deassert TXLPIEN.
Populate phylink_config lpi_interfaces (MII, GMII, RGMII variants)
and lpi_capabilities (MAC_100FD | MAC_1000FD) so phylink can
negotiate EEE with the PHY and call the callbacks appropriately.
Set lpi_timer_default to 250000 us and eee_enabled_default to true.
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260304105432.631186-3-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GEM MAC provides four read-only, clear-on-read LPI statistics
registers at offsets 0x270-0x27c:
GEM_RXLPI (0x270): RX LPI transition count (16-bit)
GEM_RXLPITIME (0x274): cumulative RX LPI time (24-bit)
GEM_TXLPI (0x278): TX LPI transition count (16-bit)
GEM_TXLPITIME (0x27c): cumulative TX LPI time (24-bit)
Add register offset definitions, extend struct gem_stats with
corresponding u64 software accumulators, and register the four
counters in gem_statistics[] so they appear in ethtool -S output.
Because the hardware counters clear on read, the existing
macb_update_stats() path accumulates them into the u64 fields on
every stats poll, preventing loss between userspace reads.
These registers are present on SAMA5D2, SAME70, PIC32CZ, and RP1
variants of the Cadence GEM IP and have been confirmed on RP1 via
devmem reads.
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260304105432.631186-2-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RISC-V toolchain triggers a stringop-truncation warning when using
snprintf() with a fixed ETH_GSTRING_LEN (32 bytes) buffer.
Convert the driver to use the modern ethtool_sprintf() API from
linux/ethtool.h. This removes the need for manual snprintf() and
memcpy() calls, handles the 32-byte padding automatically, and
simplifies the logic by removing manual pointer arithmetic.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Sean Chang <seanwascoding@gmail.com>
Link: https://patch.msgid.link/20260302142931.49108-1-seanwascoding@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This makes it possible to use in-band autonegotiation with
SGMII.
If using a device tree, this can be done by adding the managed =
"in-band-status" property to the gem node.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Link: https://patch.msgid.link/20260224202854.112813-3-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make it possible to connect a PHY which does not use inband
autoneg to a gem MAC using phylink's information.
The previous implementation relied on whether or not the link
was a fixed-link to disable SGMII autoneg. This commit extend
this to all link which are not configured for inband
autonegotiation.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Link: https://patch.msgid.link/20260224202854.112813-2-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-7.0-rc2).
Conflicts:
tools/testing/selftests/drivers/net/hw/rss_ctx.py
19c3a2a81d ("selftests: drv-net: rss: Generate unique ports for RSS context tests")
ce5a0f4612 ("selftests: drv-net: rss_ctx: test RSS contexts persist after ifdown/up")
include/net/inet_connection_sock.h
858d2a4f67 ("tcp: fix potential race in tcp_v6_syn_recv_sock()")
fcd3d039fa ("tcp: make tcp_v{4,6}_send_check() static")
https://lore.kernel.org/aZ8PSFLzBrEU3I89@sirena.org.uk
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c
69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
8a96b9144f ("net/mlx5e: Alloc xsk channel param out of mlx5e_open_xsk()")
Adjacent changes:
net/netfilter/ipvs/ip_vs_ctl.c
c59bd9e62e ("ipvs: use more counters to avoid service lookups")
bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
