When the bnxt RDMA driver is loaded, it calls bnxt_register_dev().
As part of this, driver sends HWRM_VNIC_CFG firmware command
to configure the VNIC to operate in dual VNIC mode. Currently
the driver ignores the result of this firmware command. The RDMA
driver must know the result since it affects its functioning.
Check return value of call to bnxt_hwrm_vnic_cfg() in
bnxt_register_dev() and return failure on error.
Fixes: a588e4580a ("bnxt_en: Add interface to support RDMA driver.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260504083611.1383776-4-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create an additional auxiliary device to support fwctl.
The next patch will create bnxt_fwctl and bind to this
device.
Link: https://patch.msgid.link/r/20260314151605.932749-4-pavan.chebbi@broadcom.com
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Up until now there was only one auxiliary device that bnxt
created and that was for RoCE driver. bnxt fwctl is also
going to use an aux bus device that bnxt should create.
This requires some nomenclature changes and refactoring of
the existing bnxt aux dev functions.
Convert 'aux_priv' and 'edev' members of struct bnxt into
arrays where each element contains supported auxbus device's
data. Move struct bnxt_aux_priv from bnxt.h to ulp.h because
that is where it belongs. Make aux bus init/uninit/add/del
functions more generic which will loop through all the aux
device types. Make bnxt_ulp_start/stop functions (the only
other common functions applicable to any aux device) loop
through the aux devices to update their config and states.
Make callers of bnxt_ulp_start() call it only when there
are no errors.
Also, as an improvement in code, bnxt_register_dev() can skip
unnecessary dereferencing of edev from bp, instead use the
edev pointer from the function parameter.
Future patches will reuse these functions to add an aux bus
device for fwctl.
Link: https://patch.msgid.link/r/20260314151605.932749-3-pavan.chebbi@broadcom.com
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We have common definitions that are now going to be used
by more than one component outside of bnxt (bnxt_re and
fwctl)
Move bnxt_ulp.h to include/linux/bnxt/ as ulp.h.
Link: https://patch.msgid.link/r/20260314151605.932749-2-pavan.chebbi@broadcom.com
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
MSIX is always requested when the RoCE driver calls bnxt_register_dev().
We already check bnxt_ulp_registered(), so checking the flag is
redundant. It was a left-over flag after converting to auxbus, so
remove it.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the firmware advertises that the device is capable of supporting
port mirroring on RoCE device, reserve one additional stat_ctx.
To support port mirroring feature, RDMA driver allocates one stat_ctx
for exclusive use in RawEth QP.
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250822040801.776196-2-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This moves bnxt_hsi.h contents to a common location so it can be
properly referenced by bnxt_en, bnxt_re, and bnge.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250714170202.39688-1-gospo@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before the commit under the Fixes tag below, bnxt_ulp_stop() and
bnxt_ulp_start() were always invoked in pairs. After that commit,
the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop()
has been called. This may result in the RoCE driver's aux driver
.suspend() method being invoked twice. The 2nd bnxt_re_suspend()
call will crash when it dereferences a NULL pointer:
(NULL ib_device): Handle device suspend call
BUG: kernel NULL pointer dereference, address: 0000000000000b78
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary)
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en]
RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re]
Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00
RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff
RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff
R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070
R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bnxt_ulp_stop+0x69/0x90 [bnxt_en]
bnxt_sp_task+0x678/0x920 [bnxt_en]
? __schedule+0x514/0xf50
process_scheduled_works+0x9d/0x400
worker_thread+0x11c/0x260
? __pfx_worker_thread+0x10/0x10
kthread+0xfe/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2b/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag
is already set. This will preserve the original symmetrical
bnxt_ulp_stop() and bnxt_ulp_start().
Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED
flag after taking the mutex to avoid any race condition. And for
symmetry, only proceed in bnxt_ulp_start() if the
BNXT_EN_FLAG_ULP_STOPPED is set.
Fixes: 3c163f35bd ("bnxt_en: Optimize recovery path ULP locking in the driver")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Co-developed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250613231841.377988-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2 ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a2 ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_lock is already held when calling bnxt_ulp_irq_stop() and
bnxt_ulp_irq_restart(). When converting rtnl_lock to netdev_lock,
the original code was rtnl_dereference() to indicate that rtnl_lock
was already held. rcu_dereference_protected() is the correct
conversion after replacing rtnl_lock with netdev_lock.
Add a new helper netdev_lock_dereference() similar to
rtnl_dereference().
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250519204130.3097027-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "ref_count" field in struct bnxt_ulp is unused after
commit a43c26fa2e ("RDMA/bnxt_re: Remove the sriov config callback").
So we can just remove it now.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250417172448.1206107-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only devlink and sriov paths are grabbing rtnl explicitly. The rest is
covered by netdev instance lock which the core now grabs, so there is
no need to manage rtnl in most places anymore.
On the core side we can now try to drop rtnl in some places
(do_setlink for example) for the drivers that signal non-rtnl
mode (TBD).
Boot-tested and with `ethtool -L eth1 combined 24` to trigger reset.
Cc: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-15-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lighter that normal, but the now usual collection of driver fixes and
small improvements:
- Small fixes and minor improvements to cxgb4, bnxt_re, rxe, srp, efa,
cxgb4
- Update mlx4 to use the new umem APIs, avoiding direct use of scatterlist
- Support ROCEv2 in erdma
- Remove various uncalled functions, constify bin_attribute
- Provide core infrastructure to catch netdev events and route them to
drivers, consolidating duplicated driver code
- Fix rare race condition crashes in mlx5 ODP flows
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ5JkNAAKCRCFwuHvBreF
YeCwAP9nrzFZMBEa0DVx7V8w3sotQCOzaaoi+4UOigeleppKSAD+K7QA5CIwNf7j
x0apvJlNsXKSYJVUI2rch/qIL8ckQwM=
=wIYu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Lighter that normal, but the now usual collection of driver fixes and
small improvements:
- Small fixes and minor improvements to cxgb4, bnxt_re, rxe, srp,
efa, cxgb4
- Update mlx4 to use the new umem APIs, avoiding direct use of
scatterlist
- Support ROCEv2 in erdma
- Remove various uncalled functions, constify bin_attribute
- Provide core infrastructure to catch netdev events and route them
to drivers, consolidating duplicated driver code
- Fix rare race condition crashes in mlx5 ODP flows"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (63 commits)
RDMA/mlx5: Fix implicit ODP use after free
RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error
RDMA/qib: Constify 'struct bin_attribute'
RDMA/hfi1: Constify 'struct bin_attribute'
RDMA/rxe: Fix the warning "__rxe_cleanup+0x12c/0x170 [rdma_rxe]"
RDMA/cxgb4: Notify rdma stack for IB_EVENT_QP_LAST_WQE_REACHED event
RDMA/bnxt_re: Allocate dev_attr information dynamically
RDMA/bnxt_re: Pass the context for ulp_irq_stop
RDMA/bnxt_re: Add support to handle DCB_CONFIG_CHANGE event
RDMA/bnxt_re: Query firmware defaults of CC params during probe
RDMA/bnxt_re: Add Async event handling support
bnxt_en: Add ULP call to notify async events
RDMA/mlx5: Fix indirect mkey ODP page count
MAINTAINERS: Update the bnxt_re maintainers
RDMA/hns: Clean up the legacy CONFIG_INFINIBAND_HNS
RDMA/rtrs: Add missing deinit() call
RDMA/efa: Align interrupt related fields to same type
RDMA/bnxt_re: Fix to drop reference to the mmap entry in case of error
RDMA/mlx5: Fix link status down event for MPV
RDMA/erdma: Support create_ah/destroy_ah in non-sleepable contexts
...
ulp_irq_stop() can be invoked from a context where FW is healthy or
when FW is in a reset state. In the latter case, ULP must stop all
interactions with HW/FW and also with application and stack. Added a
new parameter to the ulp_irq_stop() function to achieve that.
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1736446693-6692-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Using the option provided by Ethernet driver, register for FW Async
event. During probe, while registeriung with Ethernet driver, provide
the ulp hook 'ulp_async_notifier' for receiving the firmware events.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250107024553.2926983-3-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When the driver receives an async event notification from the Firmware,
we make the new ulp_async_notifier() call to inform the RDMA driver that
a firmware async event has been received. RDMA driver can then take
necessary actions based on the event type.
In the next patch, we will implement the ulp_async_notifier() callbacks
in the RDMA driver.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250107024553.2926983-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When hwrm_req_replace() fails, the driver is not invoking bnxt_req_drop()
which could cause a memory leak.
Fixes: bbf33d1d98 ("bnxt_en: update all firmware calls to use the new APIs")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250104043849.3482067-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If FW supports setting resource limits for RoCE, then just use the
FW limits instead of using some fixed values in the driver. These
limits will be used to allocate context memory for QP, SRQ, AH, and
MR resources for RoCE.
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241217182620.2454075-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refine RoCE SRIOV resource configuration design,
using the INITIALIZE_FW's flag as an indication
for the new design to the firmware. RoCE driver does not
have to provision resources to VF when firmware
advertises support for RoCE resource management by NIC driver.
Signed-off-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
CC: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730882676-24434-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If RocE is supported on the device, set the number of RoCE MSIX vectors
to the number of online CPUs + 1 and capped at these maximums:
VF: 2
NPAR: 5
PF: 64
For the PF, the maximum is now increased from the previous value
of 9 to get better performance for kernel applications.
Remove the unnecessary check for BNXT_FLAG_ROCE_CAP.
bnxt_set_dflt_ulp_msix() will only be called if the flag is set.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909202737.93852-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the quest to make struct device constant, start by making
to_auxiliary_drv() return a constant pointer so that drivers that call
this can be fixed up before the driver core changes.
As the return type previously was not constant, also fix up all callers
that were assuming that the pointer was not going to be a constant one
in order to not break the build.
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Bingbu Cao <bingbu.cao@intel.com>
Cc: Tianshu Qiu <tian.shu.qiu@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: intel-wired-lan@lists.osuosl.org
Cc: linux-rdma@vger.kernel.org
Cc: sound-open-firmware@alsa-project.org
Cc: linux-sound@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # drivers/media/pci/intel/ipu6
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20240611130103.3262749-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current scheme relies heavily on the RTNL lock for all ULP
operations between the L2 and the RoCE driver. Add a new en_dev_lock
mutex so that the asynchronous ULP_STOP and ULP_START operations
can be serialized with bnxt_register_dev() and bnxt_unregister_dev()
calls without relying on the RTNL lock. The next patch will remove
the RTNL lock from the ULP_STOP and ULP_START calls.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the RoCE driver is not registered for a RoCE capable device, add
flexibility to use the RoCE resources (MSIX/NQs) for L2 purposes,
such as additional rings configured by the user or for XDP.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing scheme sets aside a number of MSIX/NQs for the RoCE
driver whether the RoCE driver is registered or not. This scheme
is not flexible and limits the resources available for the L2 rings
if RoCE is never used.
Modify the scheme so that the RoCE MSIX/NQs can be used by the L2
driver if they are not used for RoCE. The MSIX/NQs are now
represented by 3 fields. bp->ulp_num_msix_want contains the
desired default value, edev->ulp_num_msix_vec contains the
available value (but not necessarily in use), and
ulp_tbl->msix_requested contains the actual value in use by RoCE.
The L2 driver can dip into edev->ulp_num_msix_vec if necessary.
We need to add rtnl_lock() back in bnxt_register_dev() and
bnxt_unregister_dev() to synchronize the MSIX usage between L2 and
RoCE.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In its current form, bnxt_rdma_aux_device_init() not only initializes
the necessary data structures of the newly created aux device but also
adds the aux device into the aux bus subsytem. Refactor the logic into
separate functions, first function to initialize the aux device along
with the required resources and second, to actually add the device to
the aux bus subsytem.
This separation helps to create bnxt_en_dev much earlier and save its
resources separately.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ever since commit:
3034322113 ("bnxt_en: Remove runtime interrupt vector allocation")
The MSIX base vector is effectively always 0. Remove all unneeded
structure fields and code referencing the MSIX base.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The memory for "edev->ulp_tbl" is allocated inside the
bnxt_rdma_aux_device_init() function. If it fails, the driver
will not create the auxiliary device for RoCE. Hence the NULL
check inside bnxt_register_dev() is unnecessary.
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since runtime MSIXs vector allocation/free has been removed,
the L2 driver needs to repopulate the MSIX entries for the
ulp client as the irq table may change during the recovery
process.
Fixes: 3034322113 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ulp = kzalloc() fails, the allocated edev will leak because it is
not properly assigned and the cleanup path will not be able to free it.
Fix it by assigning it properly immediately after allocation.
Fixes: 3034322113 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current VNIC structures are stored in an array bp->vnic_info[].
The index of the array (vnic_id) is passed to all the functions that
need to reference the VNIC.
This patch changes the scheme to pass the VNIC pointer instead of the
vnic index. Subsequent patches will create additional VNICs that
will not be stored in the bp->vnic_info[] array. Using the VNIC
pointer will work for all the VNICs.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The doorbell offset on P5 chips is hard coded. On the new P7 chips,
it is returned by the firmware. Simplify the logic that determines
this offset and store it in a new db_offset field in struct bnxt.
Also, provide this offset to the RoCE driver in struct bnxt_en_dev.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation to support a new P7 chip which has a lot of similarities
with the P5 chip, rename the BNXT_FLAG_CHIP_P5 flag to
BNXT_FLAG_CHIP_P5_PLUS. This will make it clear that the flag is for
P5 and newer chips.
Also, since there are no additional P5 variants in production, rename
BNXT_FLAG_CHIP_P5_THOR() to BNXT_FLAG_CHIP_P5() to keep the naming
more simple.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-14-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a parameter in the bnxt_en_dev structure to share the bar0 address
with RoCE driver.
Link: https://lore.kernel.org/r/1689742977-9128-3-git-send-email-selvin.xavier@broadcom.com
CC: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the driver unload path, the driver currently checks the valid
BNXT_FLAG_ROCE_CAP flag in bnxt_rdma_aux_device_uninit() before
proceeding. This is flawed because the flag may not be set initially
during driver load. It may be set later after the NVRAM setting is
changed followed by a firmware reset. Relying on the
BNXT_FLAG_ROCE_CAP flag may crash in bnxt_rdma_aux_device_uninit() if
the aux device was never initialized:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 8ae6aa067 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 39 PID: 42558 Comm: rmmod Kdump: loaded Tainted: G OE --------- - - 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge R750/0WT8Y6, BIOS 1.5.4 12/17/2021
RIP: 0010:device_del+0x1b/0x410
Code: 89 a5 50 03 00 00 4c 89 a5 58 03 00 00 eb 89 0f 1f 44 00 00 41 56 41 55 41 54 4c 8d a7 80 00 00 00 55 53 48 89 fb 48 83 ec 18 <48> 8b 2f 4c 89 e7 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0
RSP: 0018:ff7f82bf469a7dc8 EFLAGS: 00010292
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000206 RDI: 0000000000000000
RBP: ff31b7cd114b0ac0 R08: 0000000000000000 R09: ffffffff935c3400
R10: ff31b7cd45bc3440 R11: 0000000000000001 R12: 0000000000000080
R13: ffffffffc1069f40 R14: 0000000000000000 R15: 0000000000000000
FS: 00007fc9903ce740(0000) GS:ff31b7d4ffac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000992fee004 CR4: 0000000000773ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
bnxt_rdma_aux_device_uninit+0x1f/0x30 [bnxt_en]
bnxt_remove_one+0x2f/0x1f0 [bnxt_en]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
driver_detach+0x54/0x88
bus_remove_driver+0x77/0xc9
pci_unregister_driver+0x2d/0xb0
bnxt_exit+0x16/0x2c [bnxt_en]
__x64_sys_delete_module+0x139/0x280
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7fc98f3af71b
Fix this by modifying the check inside bnxt_rdma_aux_device_uninit()
to check for bp->aux_priv instead. We also need to make some changes
in bnxt_rdma_aux_device_init() to make sure that bp->aux_priv is set
only when the aux device is fully initialized.
Fixes: d80d88b0df ("bnxt_en: Add auxiliary driver support")
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Modified the bnxt_en code to create and pre-configure RDMA devices
with the right MSI-X vector count for the ROCE driver to use.
This is to align the ROCE driver to the auxiliary device model which
will simply bind the driver without getting into PCI-related handling.
All PCI-related logic will now be in the bnxt_en driver.
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Remove the SRIOV config callback which the bnxt_en was calling
to reconfigure the chip resources for a PF device when VFs are
created. The code is now modified to provision the VF resources
based on the total VF count instead of the actual VF count.
This allows the SRIOV config callback to be removed from the
list of ulp_ops.
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Decouple RoCE driver from directly accessing L2's private bnxt
structure. Move the fields needed by RoCE driver into bnxt_en_dev.
They'll be passed to RoCE driver by bnxt_rdma_aux_device_add()
function.
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Wherever possible use the function ops provided by auxiliary bus
instead of using proprietary ops.
Defined bnxt_re_suspend and bnxt_re_resume calls which can be
invoked by the bnxt_en driver instead of the ULP stop/start calls.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
For a single ULP user there is no need for complicating function
indirection calls. Remove all this complexity in favour of direct
function calls exported by the bnxt_en driver. This allows to
simplify the code greatly. Also remove unused ulp_async_notifier.
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Since the driver continues to use the single ULP model,
the extra complexity and indirection is unnecessary.
Remove the usage of ulp_id from the code.
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Use auxiliary driver interface for driver load, unload ROCE driver.
The driver does not need to register the interface using the netdev
notifier anymore. Removed the bnxt_re_dev_list which is not needed.
Currently probe, remove and shutdown ops have been implemented for
the auxiliary device.
Also remove exccessve validation checks for rdev.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Add auxiliary driver support.
An auxiliary device will be created if the hardware indicates
support for RDMA.
The bnxt_ulp_probe() function has been removed and a new
bnxt_rdma_aux_device_add() function has been added.
The bnxt_free_msix_vecs() and bnxt_req_msix_vecs() will now hold
the RTNL lock when they call the bnxt_close_nic()and bnxt_open_nic()
since the device close and open need to be protected under RTNL lock.
The operations between the bnxt_en and bnxt_re will be protected
using the en_ops_lock.
This will be used by the bnxt_re driver in a follow-on patch
to create ROCE interfaces.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
GCC array bounds checking complains that ulp_id is validated
only against upper bound. Make it unsigned.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20220520061955.2312968-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The conversion follows this general pattern for most of the calls:
1. The input message is changed from a stack variable initialized
using bnxt_hwrm_cmd_hdr_init() to a pointer allocated and intialized
using hwrm_req_init().
2. If we don't need to read the firmware response, the hwrm_send_message()
call is replaced with hwrm_req_send().
3. If we need to read the firmware response, the mutex lock is replaced
by hwrm_req_hold() to hold the response. When the response is read, the
mutex unlock is replaced by hwrm_req_drop().
If additional DMA buffers are needed for firmware response data, the
hwrm_req_dma_slice() is used instead of calling dma_alloc_coherent().
Some minor refactoring is also done while doing these conversions.
v2: Fix unintialized variable warnings in __bnxt_hwrm_get_tx_rings()
and bnxt_approve_mac()
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
