The CAN-FD IP on the RZ/T2H SoC is similar to R-Car Gen4, but differs in
the AFLPN and CFTML bits and supports two channels with eight interrupts.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260114154525.3169992-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The RZ/{G2L,G3E} and R-Car Gen4 SoCs support additional CAN FD mode called
FD-only mode. In this mode, communication in Classical CAN frame format is
disabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251126155911.320563-3-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The commit 5cff263606 ("can: rcar_canfd: Fix controller mode setting")
has aligned with the flow mentioned in the hardware manual for all SoCs
except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to
the wrong logic in the commit[1] sets the default mode to FD-Only mode
instead of CAN-FD mode.
This patch sets the CAN-FD mode as the default for all SoCs by dropping
the rcar_canfd_set_mode() as some SoC requires mode setting in global
reset mode, and the rest of the SoCs in channel reset mode and update the
rcar_canfd_reset_controller() to take care of these constraints. Moreover,
the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the
R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to
simplify the code later to support FD-only mode.
[1]
commit 45721c406d ("can: rcar_canfd: Add support for r8a779a0 SoC")
Fixes: 5cff263606 ("can: rcar_canfd: Fix controller mode setting")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251118123926.193445-1-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
On R-Car Gen3 using PSCI, s2ram powers down the SoC. After resume, the
CAN-FD interface no longer works. Trying to bring it up again fails:
# ip link set can0 up
RTNETLINK answers: Connection timed out
# dmesg
...
channel 0 communication state failed
Fix this by populating the (currently empty) suspend and resume
callbacks, to stop/start the individual CAN-FD channels, and
(de)initialize the CAN-FD controller.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251124102837.106973-8-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Convert the Renesas R-Car CAN-FD driver from SIMPLE_DEV_PM_OPS() to
DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
__maybe_unused annotations from its suspend and resume callbacks, and
reduces kernel size in case CONFIG_PM or CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251124102837.106973-7-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The CAN clock is enabled before calling open_candev(), and disabled
before calling close_candev(). Invert the order of the latter, to
restore symmetry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251124102837.106973-6-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Extract the code to (de)initialize global state into separate functions,
for future reuse.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251124102837.106973-5-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Replace devm_clk_get_optional_enabled()->devm_clk_get_optional() as the
RAM clk needs to be enabled in resume for proper operation in STR mode
for RZ/G3E SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251124102837.106973-4-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Global state is initialized and torn down before per-channel state.
Invert the order to restore symmetry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251124102837.106973-3-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The two resets are asserted during cleanup in the same order as they
were deasserted during probe. Invert the order to restore symmetry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251124102837.106973-2-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can_change_mtu() became obsolete by commit 2304993860 ("can: populate the
minimum and maximum MTU values"). Now that net_device->min_mtu and
net_device->max_mtu are populated, all the checks are already done by
dev_validate_mtu() in net/core/dev.c.
Remove the net_device_ops->ndo_change_mtu() callback of all the physical
interfaces, then remove can_change_mtu(). Only keep the vcan_change_mtu()
and vxcan_change_mtu() because the virtual interfaces use their own
different MTU logic.
The only functional change this patch introduces is that now the user will
be able to change the MTU even if the interface is up. This does not matter
for Classical CAN and CAN FD because their MTU range is composed of only
one value, respectively CAN_MTU and CANFD_MTU. For the upcoming CAN XL, the
MTU will be configurable within the CANXL_MIN_MTU to CANXL_MAX_MTU range at
any time, even if the interface is up. This is consistent with the other
net protocols and does not contradict ISO 11898-1:2024 as having a
modifiable MTU is a kernel extension.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251003-remove-can_change_mtu-v1-1-337f8bc21181@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmjUChsTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnIpyB/90yOwkpWSGis1g+ijY5YL8DAkPb6x3
p8KWRQPVa3VsKWuPTZN0BWsVfxxwzJTUcsIDm2DdIrsSMU0B5fbFgxKl8zQO8Tsd
zHE5LrAR+q/GxKh6LbYHie6kUfq8k4kSP6qKn3OaNOywtxm9iQsgLLKbv7HEQvXv
Be84BDZWGiKDBRPyil8v3uXtvjTTxGWttqCO5wu+WQx1vJaQtxIh+zrWhB2GwHiJ
1gr4qT5clRLKDkCdy1Z3liCBnEX1cQ+Yekhkp97y6hIvxnQdP1ZamHfSm8CLOOyS
CNWgZM3Phl2arqkJl7RBBXw20zeH80H3PbBgVwrB637tq1XI9wiM7i2q
=JakB
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-09-25
this is a pull request of 48 patches for net-next/main, which
supersedes tags/linux-can-next-for-6.18-20250923.
The 1st patch is by Xichao Zhao and converts ns_to_ktime() to
us_to_ktime() in the m_can driver.
Vincent Mailhol contributes 2 patches: Updating the MAINTAINERS and
mailmap files to Vincent's new email address and sorting the includes
in the CAN helper library alphabeticaly.
Stéphane Grosjean's patch modifies all peak CAN drivers and the
mailmap to reflect Stéphane's new email address.
4 patches by Biju Das update the CAN-FD handling in the rcar_canfd
driver.
Followed by 11 patches by Geert Uytterhoeven updating and improving
the rcar_can driver.
Stefan Mätje contributes 2 patches for the esd_usb driver updating the
error messages.
The next 3 patch series are all by Vincent Mailhol: 3 patches to
optimize the size of struct raw_sock and struct uniqframe. 4 patches
which rework the CAN MTU logic as preparation for CAN-XL interfaces.
And finally 20 patches that prepare and refactor the CAN netlink code
for the upcoming CAN-XL support.
* tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (48 commits)
can: netlink: add userland error messages
can: dev: add can_get_ctrlmode_str()
can: calc_bittiming: make can_calc_tdco() FD agnostic
can: netlink: make can_tdc_fill_info() FD agnostic
can: netlink: add can_bitrate_const_fill_info()
can: netlink: add can_bittiming_const_fill_info()
can: netlink: add can_bittiming_fill_info()
can: netlink: add can_data_bittiming_get_size()
can: netlink: make can_tdc_get_size() FD agnostic
can: netlink: add can_ctrlmode_changelink()
can: netlink: add can_dtb_changelink()
can: netlink: make can_tdc_changelink() FD agnostic
can: netlink: remove useless check in can_tdc_changelink()
can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic
can: netlink: add can_validate_databittiming()
can: netlink: add can_validate_tdc()
can: netlink: refactor can_validate_bittiming()
can: netlink: document which symbols are FD specific
can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h
can: dev: move struct data_bittiming_params to linux/can/bittiming.h
...
====================
Link: https://patch.msgid.link/20250925121332.848157-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If alloc_candev() failed due to out-of-memory, the core memory
allocation code has already printed an error message.
If alloc_candev() failed for a different reason, alloc_netdev_mqs() has
already printed an error message.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/2d6ad4be211a35492570fd7219ca7a89b384bfad.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Convert CAN Mailbox Register field accesses to use the FIELD_PREP() and
FIELD_GET() bitfield access macro.
This gets rid of explicit shifts, and keeps a clear separation between
hardware register layouts and offical CAN definitions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/c75c7d6ed5929c4becf7c9178cec04a0731e8ab1.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Convert CAN Bit Configuration Register field accesses to use the
FIELD_PREP() bitfield access macro. While at it, fix the misspelling of
BRP.
This gets rid of custom function-like field preparation macros.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/01cfaedba2be22515ba8700893ea7f113df959c0.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Convert CAN Control Register field accesses to use the FIELD_PREP()
bitfield access macro. Add a few more comments and definitions while at
it.
This gets rid of explicit (and sometimes confusing) shifts.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/077640e31949dc3c9d128a08ade94c9e9cd25672.1755857536.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Driver configures register to choose controller mode before
setting all channels to reset mode leading to failure.
The patch corrects operation of mode setting.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Tranh Ha <tranh.ha.xb@renesas.com>
Link: https://patch.msgid.link/TYWPR01MB87434739F83E27EDCD23DF44B416A@TYWPR01MB8743.jpnprd01.prod.outlook.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Introduce rcar_canfd_compute_data_bit_rate_cfg() for simplifying data bit
rate configuration by replacing function-like macros.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250908120940.147196-5-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Update RCANFD_CFG_* macros to give a meaning to the magic number using
GENMASK macro and extract the values using FIELD_PREP macro.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250908120940.147196-3-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The calculation formula for nominal bit rate of classical CAN is the same as
that of nominal bit rate of CANFD on the RZ/G3E and R-Car Gen4 SoCs
compared to other SoCs. Update nominal bit rate constants.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250908120940.147196-2-biju.das.jz@bp.renesas.com
[mkl: slightly improve wording of commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
On R-Car Gen3 using PSCI, s2ram powers down the SoC. After resume, the
CAN interface no longer works, until it is brought down and up again.
Fix this by calling rcar_can_start() from the PM resume callback, to
fully initialize the controller instead of just restarting it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/699b2f7fcb60b31b6f976a37f08ce99c5ffccb31.1755165227.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Convert the Renesas R-Car CAN driver from SIMPLE_DEV_PM_OPS() to
DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
__maybe_unused annotations from its suspend and resume callbacks, and
reduces kernel size in case CONFIG_PM or CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/6ffe085f6e2548f53674dd11704b388cf4b303e9.1752086078.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The rcar_canfd_f_*() inline functions to obtain channel-specific CAN-FD
register offsets really describe a memory layout. Hence replace them by
a C structure, to simplify the code, and reduce kernel size.
This also gets rid of warnings about unused rcar_canfd_f_*() inline
functions, which are reported by recent versions of clang.
Suggested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/20250618183827.5bebca8f@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/292b75b3bc8dd95f805f0223f606737071c8cf86.1750327217.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Renesas CAN-FD hardware block supports configuring Transceiver Delay
Compensation, and reading back the Transceiver Delay Compensation
Result, which is needed to support high transfer rates like 8 Mbps.
The Secondary Sample Point is either the measured delay plus the
configured offset, or just the configured offset.
Fix the existing RCANFD_FDCFG_TDCO() macro for the intended use case
(writing instead of reading the field). Add register definition bits
for the Channel n CAN-FD Status Register.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/69db727d5f728d679ba691d20854e7d963d0f323.1749655315.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Return early after completing all setup for non-FD mode in
rcar_canfd_set_bittiming(), to prepare for the advent of more FD-only
setup.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/35fcdcad026cfdd0fd361637f065842d99a6c19d.1749655315.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The configuration register format for nominal bit timings in CAN-FD mode
and the format for bit timings in CAN mode on CAN-FD controllers with
shared Classical CAN registers are the same.
Restructure the code to make this clear, also reducing kernel size by 80
bytes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/b7643a3c49777989d02145a85b85cf773ec2123f.1749655315.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reuse the existing Channel Data Bitrate Configuration Register offset
member in the register configuration as the base offset for all related
channel-specific registers.
Rename the member and update the (incorrect) comment to reflect this.
Replace the function-like channel-specific register offset macros by
inline functions.
This fixes the offsets of all other (currently unused) channel-specific
registers on R-Car Gen4 and RZ/G3E, and allows us to replace
RCANFD_GEN4_FDCFG() by the more generic rcar_canfd_f_cfdcfg().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/75c8197c849fc9e360a75d4fa55bc01c1d850433.1749655315.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
There is no need to have debug code to print the bittiming values, as
the user can get all values through the netlink interface.
Suggested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/a8b9f2c8938dc5e63b8faf1d0cdc91dadc12117e.1749655315.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This is a preparation patch for the introduction of CAN XL.
CAN FD and CAN XL uses similar bittiming parameters. Add one level of
nesting for all the CAN FD parameters. Typically:
priv->can.data_bittiming;
becomes:
priv->can.fd.data_bittiming;
This way, the CAN XL equivalent (to be introduced later) would be:
priv->can.xl.data_bittiming;
Add the new struct data_bittiming_params which contains all the data
bittiming parameters, including the TDC and the callback functions.
This done, update all the CAN FD drivers to make use of the new
layout.
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250501171213.2161572-2-mailhol.vincent@wanadoo.fr
[mkl: fix rcar_canfd]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The CAN-FD IP found on the RZ/G3E SoC is similar to R-Car Gen4, but
it has no external clock instead it has clk_ram, it has 6 channels
and supports 20 interrupts. Add support for RZ/G3E CAN-FD driver.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250417054320.14100-20-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently multi_channel_irqs has only 2 channels. But RZ/G3E has six
channels. Enhance multi_channel_irqs handling to support more than two
channels.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250417054320.14100-19-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
All existing SoCs support an external clock, but RZ/G3E has only internal
clocks. Add external_clk variable to struct rcar_canfd_hw_info to handle
this difference.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250417054320.14100-18-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
R-Car Gen3 and Gen4 have some differences in the shift bits. Introduce a
struct rcar_canfd_shift_data to hold these values and add the struct
rcar_canfd_shift_data variable sh to struct rcar_canfd_hw_info to handle
these differences. After this, drop the unused functions reg_gen4() and
is_gen4().
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250417054320.14100-17-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
R-Car Gen3 and Gen4 have some differences in the register offsets. Add
struct rcanfd_regs variable regs to the struct rcar_canfd_hw_info to
handle these differences.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250417054320.14100-16-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
