File-scope 'max77705_pm_ops' is not used outside of this unit, so make
it static to silence sparse warning:
max77705.c:160:1: warning: symbol 'max77705_pm_ops' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260216110432.160084-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
* power-supply core
- introduce adc-battery-helper for capacity estimation based on
simple ADC readings of battery voltage and current
- add new property for battery internal resistance
- add new property for battery state of health
* power-supply drivers
- ug3105_battery: convert to adc-battery-helper
- intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
- rt9467-charger: add voltage and current ADC support
- sbs-charger: support multiple instances
- qcom_battmgr: add charge control support
- qcom_battmgr: add support for state of health and internal resistance
- max77705_charger: big driver cleanup
- max77705_charger: add support for setting charge current
- misc. minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=UcWZ
-----END PGP SIGNATURE-----
Merge tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce adc-battery-helper for capacity estimation based on
simple ADC readings of battery voltage and current
- add new properties for battery internal resistance and state of
health
Power-supply drivers:
- ug3105_battery: convert to adc-battery-helper
- intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
- rt9467-charger: add voltage and current ADC support
- sbs-charger: support multiple instances
- qcom_battmgr:
- add charge control support
- add support for state of health and internal resistance
- max77705_charger:
- big driver cleanup
- add support for setting charge current
- misc minor fixes and cleanups"
* tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
power: supply: qcom_battmgr: handle charging state change notifications
power: supply: max77705_charger: use REGMAP_IRQ_REG_LINE macro
power: supply: max77705_charger: rework interrupts
power: supply: max77705_charger: add writable properties
power: supply: max77705_charger: return error when config fails
power: supply: max77705_charger: use regfields for config registers
power: supply: max77705_charger: refactoring: rename charger to chg
mfd: max77705: max77705_charger: move active discharge setting to mfd parent
power: supply: max77976_charger: fix constant current reporting
power: supply: qcom_battmgr: Add charge control support
dt-bindings: soc: qcom,pmic-glink: Add charge limit nvmem properties
power: supply: qcom_battmgr: update compats for SM8550 and X1E80100
power: supply: qcom_battmgr: Add state_of_health property
power: supply: qcom_battmgr: Add resistance power supply property
power: supply: core: Add state_of_health power supply property
power: supply: core: Add resistance power supply property
power: supply: rx51: remove redundant condition checks
dt-bindings: power: supply: bq24190: document charge enable pin
dt-bindings: power: supply: bq27xxx: document optional interrupt
power: supply: intel_dc_ti_battery: Drop no longer relevant comment
...
Current implementation describes only MFD's own topsys interrupts.
However, max77705 has a register which indicates interrupt source, i.e.
it acts as an interrupt controller. There's 4 interrupt sources in
max77705: topsys, charger, fuelgauge, usb type-c manager.
Setup max77705 MFD parent as an interrupt controller. Delete topsys
interrupts because currently unused.
Remove shared interrupt flag, because we're are an interrupt controller
now, and subdevices should request interrupts from us.
Fixes: c8d50f0297 ("mfd: Add new driver for MAX77705 PMIC")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250909-max77705-fix_interrupt_handling-v3-1-233c5a1a20b5@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Active discharge setting is a part of MFD top level i2c device, hence
cannot be controlled by charger. Writing to MAX77705_PMIC_REG_MAINCTRL1
register from charger driver is a mistake.
Move active discharge setting to MFD parent driver.
Fixes: a6a494c8e3 ("power: supply: max77705: Add charger driver for Maxim 77705")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
