- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaeji/QAKCRBAj56VGEWX
nGHgAP4n7O4oAR9Oik3zKLN095LPpMumqSMTQ8o3TpKzNWql2AEAscjPpRoCGdPA
94CsBVwFYBYkiWd2l5lye7WvK2tNrgI=
=pNNY
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups
* tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (101 commits)
Input: charlieplex_keypad - add GPIO charlieplex keypad
dt-bindings: input: add GPIO charlieplex keypad
dt-bindings: input: add settling-time-us common property
dt-bindings: input: add debounce-delay-ms common property
Input: imx_keypad - fix spelling mistake "Colums" -> "Columns"
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
Input: ct82c710 - remove driver
Input: mk712 - remove driver
Input: logibm - remove driver
Input: inport - remove driver
Input: qt1070 - inline i2c_check_functionality check
Input: qt1050 - inline i2c_check_functionality check
Input: aiptek - validate raw macro indices before updating state
Input: gf2k - skip invalid hat lookup values
Input: xpad - add RedOctane Games vendor id
Input: xpad - remove stale TODO and changelog header
Input: usbtouchscreen - refactor endpoint lookup
Input: aw86927 - add support for Awinic AW86938
dt-bindings: input: awinic,aw86927: Add Awinic AW86938
...
Highlights:
- asus-wmi:
- Retain battery charge threshold during boot which avoids unsolicited
change to 100%. Return -ENODATA when the limit is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
- barco-p50-gpio: Normalize gpio_get return values
- bitland-mifs-wmi: Add driver for Bitland laptops (supports platform
profile,hwmon, kbd backlight, gpu mode, hotkeys, and
fan boost)
- dell_rbu: Fix using uninitialized value in sysfs write function
- dell-wmi-sysman: Respect destination length when constructing enum
strings
- hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and Omen MAX
16-ak0xxxx
- input: trackpoint & thinkpad_acpi: Enable doubletap by default and
add sysfs enable/disable
- int3472: Add support for GPIO type 0x02 (IR flood LED)
- intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
- intel/vsec: Refactor to support ACPI-enumerated PMT endpoints.
- pcengines-apuv2: Attach software node to the gpiochip
- uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
- wmi: Perform output size check within WMI core to allow simpler WMI
drivers
- acpi_driver -> platform driver conversions (a large number of changes
from Rafael J. Wysocki)
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wmi:
- adjust screenpad power/brightness handling
- do not enforce a battery charge threshold
- fix screenpad brightness range
barco-p50-gpio:
- convert to guard() notation
- normalize return value of gpio_get
bitland-mifs-wmi:
- Add new Bitland MIFS WMI driver
dell/dell-rbtn:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
dell_rbu:
- avoid uninit value usage in packet_size_write()
dell-wmi-sysman:
- bound enumeration string aggregation
- Clean up security buffer helpers
- Fix typo in function comment
- Use standard kobj_sysfs_ops
- Use sysfs_emit{_at} in show functions
Documentation: laptops:
- Update documentation for uniwill laptops
Documentation:
- thinkpad-acpi - Document doubletap_enable attribute
eeepc-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
fujitsu:
- Convert backlight driver to a platform one
- Convert laptop driver to a platform one
- Register ACPI notify handlers directly
- Reorder code to avoid forward declarations
fujitsu-tablet:
- Convert ACPI driver to a platform one
hp-wmi:
- add locking for concurrent hwmon access
- add Omen 14-fb0xxx (board 8C58) support
- Add support for Omen 16-n0xxx (8A44)
- Add support for Omen 16-wf1xxx (8C77)
- Add support for OMEN MAX 16-ak0xxx (8D87)
- avoid cancel_delayed_work_sync from work handler
- fix fan table parsing
- fix ignored return values in fan settings
- fix u8 underflow in gpu_delta calculation
- Ignore backlight and FnLock events
- use mod_delayed_work to reset keep-alive timer
input:
- trackpoint - Enable doubletap by default on capable devices
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
- Parameterize LED con_id in registration
- Rename pled to led in LED registration code
- Use local variable for LED struct access
intel/rst:
- Convert ACPI driver to a platform one
intel/smartconnect:
- Convert ACPI driver to a platform one
intel/tpmi:
- Use 32 bit aligned address for debugfs mem write
intel/vsec:
- Decouple add/link helpers from PCI
- Make driver_data info const
- Plumb ACPI PMT discovery tables through vsec
- Refactor base_addr handling
- Return real error codes from registration path
- Switch exported helpers from pci_dev to device
lg-laptop:
- Convert ACPI driver to a platform one
- Drop debug-only ACPI notify handler
nvsw-sn2201:
- Drop unused include
panasonic-laptop:
- Convert ACPI driver to a platform one
- Fix OPTD notifier registration and cleanup
- Make pcc_register_optd_notifier() void
- Register ACPI notify handler directly
- Remove redundant checks from 3 functions
pcengines-apuv2:
- attach software node to the gpiochip
sony-laptop:
- Convert NC driver to a platform one
- Convert PIC driver to a platform one
- Register ACPI notify handler directly
surface: hotplug:
- Correct inclusion for GPIO APIs
surface: surfacepro3_button:
- Convert to a platform driver
- Drop wakeup source on remove
- Register ACPI notify handler
system76:
- Convert ACPI driver to a platform one
- Drop redundant devm_led_classdev_unregister()
- Register ACPI notify handler directly
thinkpad_acpi:
- Add sysfs control for TrackPoint double-tap
- Drop ACPI driver registration
- remove obsolete TODO comment
- use seq_puts() instead of seq_printf()
tools/power/x86/intel-speed-select:
- Avoid current base freq as maximum
- Fix cpu extended family ID decoding
- Fix output when running on unsupported CLX platforms
- Fix some program return value
- Print Version info when Incompatible API version is detected
- v1.26 release
topstar-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_acpi:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
- Reorder code to avoid forward declaration
toshiba_bluetooth:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_haps:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
uniwill-laptop:
- Apply features across all TUXEDO devices
- Fix signedness bug
- Fix XMG Fusion 15 (L19) entries
- Implement USB-C power priority setting
- Rework hwmon feature defines
wireless-hotkey:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
wmi:
- Add wmidev_invoke_procedure()
- Convert drivers to use wmidev_invoke_procedure()
- Extend wmidev_invoke_method() to reject undersized data
- Extend wmidev_query_block() to reject undersized data
- Prepare to reject undersized unmarshalling results
- Replace .no_notify_data with .min_event_size
x86:
- remove unnecessary module_init/exit() functions
Merges:
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge tag 'fixes' into 'for-next'
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaeYxSwAKCRBZrE9hU+XO
MRzTAQCPUKVOpSY/cjtPXVBn0uJbAo1MSvytv00Kv7dcatvrrwEA9lqmwOfl0kzr
CowEVVCD3om++W9vOsL65hachbAl1QA=
=1qkw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"asus-wmi:
- Retain battery charge threshold during boot which avoids
unsolicited change to 100%. Return -ENODATA when the limit
is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
barco-p50-gpio:
- Normalize gpio_get return values
bitland-mifs-wmi:
- Add driver for Bitland laptops (supports platform profile,
hwmon, kbd backlight, gpu mode, hotkeys, and fan boost)
dell_rbu:
- Fix using uninitialized value in sysfs write function
dell-wmi-sysman:
- Respect destination length when constructing enum strings
hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and
Omen MAX 16-ak0xxxx
input: trackpoint & thinkpad_acpi:
- Enable doubletap by default and add sysfs enable/disable
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
intel/vsec:
- Refactor to support ACPI-enumerated PMT endpoints.
pcengines-apuv2:
- Attach software node to the gpiochip
uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
wmi:
- Perform output size check within WMI core to allow simpler WMI
drivers
misc:
- acpi_driver -> platform driver conversions (a large number of
changes from Rafael J. Wysocki)
- cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77)
platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44)
platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87)
platform/x86: hp-wmi: fix fan table parsing
platform/x86: hp-wmi: add Omen 14-fb0xxx (board 8C58) support
platform/wmi: Replace .no_notify_data with .min_event_size
platform/wmi: Extend wmidev_query_block() to reject undersized data
platform/wmi: Extend wmidev_invoke_method() to reject undersized data
platform/wmi: Prepare to reject undersized unmarshalling results
platform/wmi: Convert drivers to use wmidev_invoke_procedure()
platform/wmi: Add wmidev_invoke_procedure()
platform/x86: int3472: Add support for GPIO type 0x02 (IR flood LED)
platform/x86: int3472: Parameterize LED con_id in registration
platform/x86: int3472: Rename pled to led in LED registration code
platform/x86: int3472: Use local variable for LED struct access
platform/x86: thinkpad_acpi: remove obsolete TODO comment
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
platform/x86: hp-wmi: Ignore backlight and FnLock events
platform/x86: uniwill-laptop: Fix signedness bug
platform/x86: dell_rbu: avoid uninit value usage in packet_size_write()
...
-----BEGIN PGP SIGNATURE-----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=FFRz
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
Bus mice use specialized bus interface implemented via an ISA add-in
cards. They were superseded by PS/2 and later USB.
Kconfig entry for the Logitech bus mice states that they "are rather
rare these days". This statement was true in 2002 and is no less true
in 2024.
Remove the driver.
Link: https://patch.msgid.link/20240808172733.1194442-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Inport (ATI XL and Microsoft) mice use specialized bus interface
implemented via an ISA add-in card. Have been superseded by PS/2 and
then USB, and are historical curiosity by now.
Remove the driver.
Link: https://patch.msgid.link/20240808172733.1194442-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Palm Top PC 110 is a handheld personal computer with 80486SX CPU that was
released exclusively in Japan in September 1995.
While the kernel still supports 486 CPU it is highly unlikely that anyone
is using this device with the latest kernel.
Remove the driver.
[bhelgaas: since this was posted, "x86/cpu: Remove M486/M486SX/ELAN
support" has been queued for v7.1, so pc110pad is no longer relevant:
https://lore.kernel.org/all/20251214084710.3606385-2-mingo@kernel.org/]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20240808172733.1194442-4-dmitry.torokhov@gmail.com
- new IDs for BETOP BTP-KP50B/C and Razer Wolverine V3 Pro added to
xpad controller driver
- another quirk for new TUXEDO InfinityBook added to i8042
- a small fixup for Synaptics RMI4 driver to properly unlock mutex when
encountering an error in F54
- an update to bcm5974 touch controller driver to reliably switch into
wellspring mode.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCadCpLQAKCRBAj56VGEWX
nDgsAP0UYEFs1rFYYESyaTJVkbUg1DVxbqzFkL69MJasfFDLRQD/dM3ZECzCatiU
IIOXbWw+0kwNR3bysSp3RQ2jQoeS6gQ=
=Rs1H
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- new IDs for BETOP BTP-KP50B/C and Razer Wolverine V3 Pro added to
xpad controller driver
- another quirk for new TUXEDO InfinityBook added to i8042
- a small fixup for Synaptics RMI4 driver to properly unlock mutex when
encountering an error in F54
- an update to bcm5974 touch controller driver to reliably switch into
wellspring mode
* tag 'input-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - add support for BETOP BTP-KP50B/C controller's wireless mode
Input: xpad - add support for Razer Wolverine V3 Pro
Input: synaptics-rmi4 - fix a locking bug in an error path
Input: i8042 - add TUXEDO InfinityBook Max 16 Gen10 AMD to i8042 quirk table
Input: bcm5974 - recover from failed mode switch
Use the common USB helper for looking up interrupt-in endpoints instead
of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330095948.1663141-4-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the common USB helpers for looking up interrupt-in endpoints (and
determining endpoint numbers) instead of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260330095948.1663141-3-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Enable doubletap functionality by default on TrackPoint devices that
support it. The feature is detected using firmware ID pattern matching
(PNP: LEN03xxx) with a deny list of incompatible devices.
This provides immediate doubletap functionality without requiring
userspace configuration. The hardware is enabled during device
detection, while event filtering continues to be handled by the
thinkpad_acpi driver as before.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260311143144.482145-2-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The only user of psmouse_queue_work() and therefore kpsmoused workqueue
is psmouse-base itself, when it tries to schedule the resync work. Since
resyncing is not going to race with itself we no longer need the
dedicated ordered workqueue.
Remove it and switch to using regular (non-delayed) work structure
scheduled on the default workqueue.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Registering supplemental bare PS/2 device does not need to be ordered
relative to attempt to resynchronization done in psmouse core.
Switch to the default workqueue and use normal (non-delayed) work.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The original code uses flush_workqueue() in psmouse_disconnect() to
ensure the completion of both resync_work and dev3_register_work.
Given that alps_disconnect() already uses disable_delayed_work_sync()
to cancel dev3_register_work, replacing flush_workqueue() with
disable_delayed_work_sync(&psmouse->resync_work) is more robust
and efficient.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/6e40a46e5d9e6e3237702958b8f641263c28d2e4.1765939397.git.duoming@zju.edu.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The protocol flavor for ALPS touchpads found in OLPC laptops has been
broken since 2015 commit c378b5119e ("Input: psmouse - factor out
common protocol probing code") that forgot to add hgpk_init() to HGPK
entry in psmouse_protocols array.
Since nobody complained for 10 years let's remove it.
Acked-by: Andres Salomon <dilinger@queued.net>
Link: https://patch.msgid.link/abC5U_JigA9TrGYu@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Take the input device's mutex in atp_resume() and atp_recover() to make
sure they are not racing with open and close methods, and use
input_device_enabled() helper to see if communication with the device
needs to be restarted after resume.
Link: https://patch.msgid.link/uuwucixxc2ckd6ul6yv5mdvkc3twytg4tg5a5vhfqg6m2qcodc@klaco6axglbm
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use managed resources (devm_*) which simplifier
error handling and allows removing synaptics_i2c_remove() methods form
the driver.
Rename "ret" to "error" where makes sense while at it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
synaptics_i2c_resume() restarts delayed work unconditionally, even when
the input device is not opened. Guard the polling restart by taking the
input device mutex and checking input_device_enabled() before re-queuing
the delayed work.
Fixes: eef3e4cab7 ("Input: add driver for Synaptics I2C touchpad")
Signed-off-by: Minseong Kim <ii4gsp@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260121063738.799967-1-ii4gsp@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
WQ_UNBOUND on the custom workqueue instead.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-5-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-4-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The dev3_register_work delayed work item is initialized within
alps_reconnect() and scheduled upon receipt of the first bare
PS/2 packet from an external PS/2 device connected to the ALPS
touchpad. During device detachment, the original implementation
calls flush_workqueue() in psmouse_disconnect() to ensure
completion of dev3_register_work. However, the flush_workqueue()
in psmouse_disconnect() only blocks and waits for work items that
were already queued to the workqueue prior to its invocation. Any
work items submitted after flush_workqueue() is called are not
included in the set of tasks that the flush operation awaits.
This means that after flush_workqueue() has finished executing,
the dev3_register_work could still be scheduled. Although the
psmouse state is set to PSMOUSE_CMD_MODE in psmouse_disconnect(),
the scheduling of dev3_register_work remains unaffected.
The race condition can occur as follows:
CPU 0 (cleanup path) | CPU 1 (delayed work)
psmouse_disconnect() |
psmouse_set_state() |
flush_workqueue() | alps_report_bare_ps2_packet()
alps_disconnect() | psmouse_queue_work()
kfree(priv); // FREE | alps_register_bare_ps2_mouse()
| priv = container_of(work...); // USE
| priv->dev3 // USE
Add disable_delayed_work_sync() in alps_disconnect() to ensure
that dev3_register_work is properly canceled and prevented from
executing after the alps_data structure has been deallocated.
This bug is identified by static analysis.
Fixes: 04aae283ba ("Input: ALPS - do not mix trackstick and external PS/2 mouse data")
Cc: stable@kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/b57b0a9ccca51a3f06be141bfc02b9ffe69d1845.1765939397.git.duoming@zju.edu.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251027115823.391080-3-sakari.ailus@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Replace the hand-rolled %02x formatting of the Z packet warning in the
BYD driver with the %*ph format specifier. %*ph is the preferred helper
for printing a buffer in hexadecimal and makes the logging clearer and
more consistent.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Link: https://patch.msgid.link/20251202033120.2264474-1-vivek.balachandhar@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaGdm4wAKCRBAj56VGEWX
nJJxAPwMafYOIr+aW1+taLorp3FRyoFuh9Q4IZk9n3J2Dx/HGwD8CUpXDytgE+n7
BRMjXB7PPF9b35FjmKT8kTIHZxiTHAc=
=w9vL
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
* tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
Input: alps - use scnprintf() to suppress truncation warning
Input: iqs7222 - explicitly define number of external channels
Input: xpad - support Acer NGR 200 Controller
Input: xpad - return errors from xpad_try_sending_next_out_packet() up
Input: xpad - adjust error handling for disconnect
Input: apple_z2 - drop default ARCH_APPLE in Kconfig
Input: Fully open-code compatible for grepping
dt-bindings: HID: i2c-hid: elan: Introduce Elan eKTH8D18
Input: psmouse - switch to use scnprintf() to suppress truncation warning
Input: lifebook - switch to use scnprintf() to suppress truncation warning
Input: alps - switch to use scnprintf() to suppress truncation warning
Input: atkbd - switch to use scnprintf() to suppress truncation warning
Input: fsia6b - suppress buffer truncation warning for phys
Input: iqs626a - replace snprintf() with scnprintf()
The commit 76c968e75715 ("Input: alps - switch to use scnprintf() to suppress
truncation warning") converted one place in the driver while the other left
untouched. Convert the other place as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630082245.1416796-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use scnprintf() to avoid warnings about potential
truncation of "phys" field which we can tolerate.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell
Precision M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaCBDmQAKCRBAj56VGEWX
nA13AQCmVOo2PAJU2CtMxqwEVZMat0id/fk0Ro8aiW8JBzyzuwD/as/hMtOkAGyI
pUsaxLp7SlOUMq9YFlkbC/Ffe2GH2QQ=
=yrk/
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
Enable InterTouch mode on TUXEDO InfinityBook Pro 14 v5 by adding
"SYN1221" to the list of SMBus-enabled variants.
Add support for InterTouch on SYN1221 by adding it to the list of
SMBus-enabled variants.
Reported-by: Matthias Eilert <kernel.hias@eilert.tech>
Tested-by: Matthias Eilert <kernel.hias@eilert.tech>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597C033C4BC20EE2A0C4543B888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ 5.989588] psmouse serio1: synaptics: Your touchpad (PNP: TOS0213 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 6.039923] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x52d884, board id: 3322, fw id: 2658004
The board is labelled TM3322.
Present on the Toshiba / Dynabook Portege X30-D and possibly others.
Confirmed working well with psmouse.synaptics_intertouch=1 and local build.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597711E7933A08389FEC31DB888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
1) Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
2) The final cleanup of the hrtimer_init() to hrtimer_setup() conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline and
all new users are catched.
Doing this right before rc1 ensures that new code which is merged post rc1
is not introducing new instances of the original functionality.
-----BEGIN PGP SIGNATURE-----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=8Ftq
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ/DJvwAKCRBAj56VGEWX
nIvGAQC9nGVCLQX7xO7saMfx5+4/jhkXgPTeDtRs59vNKIoEFAEAgW9DUKShtESV
WQlwkyzoRbAjC8suc2sc+bs4fJ60BQ0=
=xlqq
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In cyapa_update_fw_store(), if 'count' is zero, the write to
fw_name[count-1] underflows the array.
Presumably that's not possible in normal operation, as its caller
sysfs_kf_write() already checks for zero. Regardless it's a good idea
to check for the error explicitly and avoid undefined behavior.
Fixes the following warning with an UBSAN kernel:
vmlinux.o: warning: objtool: .text.cyapa_update_fw_store: unexpected end of section
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/73ae0bb3c656735890d914b74c9d6bb40c25d3cd.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503171547.LlCTJLQL-lkp@intel.com/
When SMBUS is disabled, this is never referenced, causing a W=1 warning:
drivers/input/mouse/synaptics.c:164:27: error: 'smbus_pnp_ids' defined but not used [-Werror=unused-const-variable=]
Hide the array behind the same #ifdef as the code referencing it.
Fixes: e839ffab02 ("Input: synaptics - add support for Intertouch devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225145451.1141995-1-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When enabling a pass-through port an interrupt might come before psmouse
driver binds to the pass-through port. However synaptics sub-driver
tries to access psmouse instance presumably associated with the
pass-through port to figure out if only 1 byte of response or entire
protocol packet needs to be forwarded to the pass-through port and may
crash if psmouse instance has not been attached to the port yet.
Fix the crash by introducing open() and close() methods for the port and
check if the port is open before trying to access psmouse instance.
Because psmouse calls serio_open() only after attaching psmouse instance
to serio port instance this prevents the potential crash.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 100e16959c ("Input: libps2 - attach ps2dev instances as serio port's drvdata")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219522
Cc: stable@vger.kernel.org
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/Z4qSHORvPn7EU2j1@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114192701.912430-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove() method
(from remove_new())
- updates to a number of input drivers to use the new cleanup facilities
(__free(...), guard(), and scoped-guard()) which ensure that the
resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ0PQIAAKCRBAj56VGEWX
nDFFAQCSj3Va9Y6ZgNFvjmPAoA3RmsrvydXMG6PuyHEEfvTtpgD9GPldve3MRqRr
VcrLJXMgyX2+RgpKm1W9ZQgK9Nudegs=
=Ry7d
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove()
method (from remove_new())
- updates to a number of input drivers to use the new cleanup
facilities (__free(...), guard(), and scoped-guard()) which ensure
that the resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
Input: mpr121 - use devm_regulator_get_enable_read_voltage()
Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
Input: spear-keyboard - don't include 'pm_wakeup.h' directly
Input: cypress-sf - constify struct i2c_device_id
Input: ads7846 - increase xfer array size in 'struct ser_req'
Input: fix the input_event struct documentation
Input: i8042 - fix typo dublicate to duplicate
Input: ads7846 - add dummy command register clearing cycle
Input: cs40l50 - fix wrong usage of INIT_WORK()
Input: introduce notion of passive observers for input handlers
Input: maple_keyb - use guard notation when acquiring mutex
Input: locomokbd - use guard notation when acquiring spinlock
Input: hilkbd - use guard notation when acquiring spinlock
Input: synaptics-rmi4 - switch to using cleanup functions in F34
Input: synaptics - fix a typo
dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
Input: omap-keypad - use guard notation when acquiring mutex
Input: imagis - fix warning regarding 'imagis_3038_data' being unused
Input: userio - remove unneeded semicolon
Input: sparcspkr - use cleanup facility for device_node
...
