The representor ib_device's phys_port_cnt is set to the total vport
count when the uplink vport rep loads. Individual port[i].rep entries
are populated only as each VF/SF vport rep registers. A NULL .rep for
a given port index is therefore expected while VF reps are still
loading or haven't been enabled yet.
Tools like ibstat and ibv_devinfo iterate over all ports of all RDMA
devices. Some ports may not have an eswitch representor, causing
repeated dmesg warnings when these tools run without a device argument.
This causes dmesg to be flooded with this message on every ibstat
invocation.
Remove the warning and return -ENODEV when no representor exists for
the queried port.
Fixes: aaecff5e13 ("RDMA/mlx5: Implement query_port_speed callback")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260811-remove-warn-on-miss-rep-v1-1-eccf399bc6af@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Current release - fix to a fix:
- netfilter: ipset: remove need to allocate memory on delete operations
Current release - regressions:
- macb: drop CONFIG_OF #if block, fix build
Previous releases - always broken:
- stream of fixes for SCTP continues
- inet: frags: strip GSO state from fragments before reassembly
- virtio-net: ensure that TCP packets don't overflow gso_segs
- tcp-ao: fix use-after-free of current_key on reconnect to another peer
- page_pool: remove zone/policy GFP flags when allocating XArray entries
- Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN
- tls: device: fix out-of-bounds write in tls_append_frag()
- eth: bnxt:
- ring the doorbell when SW USO exits early, avoid packets stuck in Tx
- gate TPH enablement behind BNXT_SUPPORTS_QUEUE_API check, avoid users
of older NICs seeing non-actionable warning messages
- eth: qede: fix NULL pointer dereference in TPA fragment processing
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmqQojwACgkQMUZtbf5S
Irv2kg//anC58qIya/Tx3BZkpPgtbS+ki0bqb+J0a8axbItgSGEdclVtiLJn/ex0
zz9AR4Pt2DSbSUHPa7nRpdMQ2x7ZmNwNR2zqs1xClgOm5QD/2JAc53Pv81GaEKa4
O4A4TDJZfyTDsk6c0cjI3yz9uMqBt2U6pyAT6JMBIPy7/MgV+as0ETAWQlezL0sF
ZnXVg9tM3hG/8a3M88+/S1VODVJYLMucXS6pD1mqlry01SUj91elEXKiac5vCaHI
DAZaiCOmv4WV3hs7941VijPchLO64L0J+0qjGRpXiPJXQEAn4XU8QX/YNc1njgZH
tmjRWEEtLoBFcLRDUPAK9niuB5F9N3/6nnydLPLu16+exKQuCB8Bh78YHLmlrJIW
utY5ek7GtPOl31M9a5TdEGLUg5wPHSO62FhiBmTiIG4PKQym616TmOHbYJWBqFry
EPNtZ1vEJoPFNOsT1VdeD4DKVBq2UDnj/3fnphUhfvU5z+dEDdIn03+kQykwmVQT
kTuMaW4/zxR3VFjHalsI+4bvhFOEmu+/KZE07aKKm99jssDsewQHGXgYJkCPWQUk
gpnN8IVNw16ex9sfrvqje6/tshiPJJn9y/b/nGt5mq9ofgwXGmpzCPwcDgyzZKQ5
y+zVPJ0/XILHAHOBxdCklim5xiaPDYKdEI+zcEXrx/g6FraZZuI=
=1DXR
-----END PGP SIGNATURE-----
Merge tag 'net-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, IPSec and Netfilter.
Current release - fix to a fix:
- netfilter: ipset: remove need to allocate memory on delete operations
Current release - regressions:
- macb: drop CONFIG_OF #if block, fix build
Previous releases - always broken:
- stream of fixes for SCTP continues
- inet: frags: strip GSO state from fragments before reassembly
- virtio-net: ensure that TCP packets don't overflow gso_segs
- tcp-ao: fix use-after-free of current_key on reconnect to another
peer
- page_pool: remove zone/policy GFP flags when allocating XArray
entries
- Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN
- tls: device: fix out-of-bounds write in tls_append_frag()
- eth: bnxt:
- ring the doorbell when SW USO exits early, avoid packets stuck
in Tx
- gate TPH enablement behind BNXT_SUPPORTS_QUEUE_API check, avoid
users of older NICs seeing non-actionable warning messages
- eth: qede: fix NULL pointer dereference in TPA fragment processing"
* tag 'net-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (216 commits)
inet: frags: strip GSO state from fragments before reassembly
net/sched: sch_htb: limit htb_classify inner-class filter hops
selftests/net: packetdrill: add tcp_urg_ptr_retransmit
tcp: fix corruption of urgent data on multi-segment retransmit
usb: atm: usbatm: fix invalid ci_range initialization
net: fec: only stop PTP if it was initialized
slip: remove slip_hangup() to fix use-after-free in slip_receive_buf()
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup
net: dsa: mxl862xx: enable assisted learning on CPU port
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
net: stmmac: drop gso_enabled_types and rely on netdev features
net: stmmac: selftests: Don't test flow control for small rx fifos
net: stmmac: selftests: Account for the UC filter list for filtering tests
net: stmmac: dwxgmac: Account for the primary MAC address for UC filtering
net: stmmac: dwmac4: Account for the primary MAC address for UC filtering
net: stmmac: dwmac1000: Account for the primary MAC address for UC filtering
net: stmmac: selftests: Check multiple MMC counters
selftests: net: Fix slow configurations in big_tcp_tunnels.sh
selftests: net: Lower threshold with csum offload off in big_tcp_tunnels.sh
...
mlx5_query_vport_max_tx_speed() was introduced to serve the
query_port_speed path, which uses max_tx_speed == 0 when port is down.
This is incorrect for callers that need the actual configured speed
regardless of vport state, such as modify-vport-state helpers
that must preserve the speed across state transitions.
Move this logic to the caller function in the verb flow and let
mlx5_query_vport_max_tx_speed() return the raw firmware value
unconditionally.
Fixes: aaecff5e13 ("RDMA/mlx5: Implement query_port_speed callback")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816065015.3280733-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These did not seem worth sending as a dedicated rc PR during the last week
of the cycle.
* ko-rdma/for-rc:
RDMA/ipoib: Drain RCU callbacks during module teardown
RDMA/mlx5: Drain RCU callbacks during module teardown
RDMA/core: Wait for RCU callbacks before unloading ib_core
RDMA/irdma: Prevent overflows in memory contiguity checks
RDMA/siw: publish QP after initialization
RDMA/hns: Fix potential integer overflow in mhop hem cleanup
RDMA/core: Fix memory leak in __ib_create_cq() on invalid cqe
RDMA/mana_ib: initialize err for empty send WR lists
RDMA/erdma: initialize ret for empty receive WR lists
RDMA/irdma: Prevent user-triggered null deref on QP create
RDMA/irdma: Prevent rereg_mr for non-mem regions
RDMA/cma: Fix hardware address comparison length in netevent callback
RDMa/mlx5: Avoid frame overflow warning
IB/mad: Drop unmatched RMPP responses before reassembly
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5_ib_set_cc_params() resolves the port-specific mlx5_core_dev via
mlx5_ib_get_native_port_mdev() but issued MLX5_CMD_OP_MODIFY_CONG_PARAMS
through dev->mdev. On an affiliated secondary RoCE port those pointers
refer to different devices, so a write to the secondary port's cc_params
debugfs file either altered the master port or failed with a master-side
command error, while the read path already used the resolved mdev and
returned the unchanged secondary value.
Issue the command to the resolved mdev, the same device whose capabilities
were checked when its debugfs directory was created. It is already
referenced by the get/put pair, so its lifetime is safe.
Fixes: 31578defe4 ("RDMA/mlx5: Update mlx5_ib to use new cmd interface")
Link: https://patch.msgid.link/20260726-mlx5-ib-set-cc-params-applies-conges-v1-1-a253edafe1f3@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
get_param() reads a congestion parameter as a u32 but formats it with the
signed "%d" into an 11-byte stack buffer. A value with bit 31 set, such as
0x80000000, renders as "-2147483648\n" whose full length is 12. snprintf()
stores only 11 bytes yet returns 12, so simple_read_from_buffer() treats 12
bytes as valid and reads one byte past lbuf[].
Size the buffer for the widest unsigned decimal, format with "%u" to match
the u32, and use scnprintf() so the length passed to
simple_read_from_buffer() reflects the bytes actually stored.
Fixes: 4a2da0b8c0 ("IB/mlx5: Add debug control parameters for congestion control")
Link: https://patch.msgid.link/20260726-get-param-leaks-kernel-stack-memory-v1-1-d61a4d39662d@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
New HW no longer implements a separate class for latency-sensitive QPs and
advertises this by a new cap bit.
REG_UMR is the only QP that used this feature, so gate its usage of the
feature on this cap.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260726-deprecate-lat-qps-v2-2-5e0c2ee55046@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
set_user_buf_size() computes the QP buffer size by left-shifting the
user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers.
A sufficiently large rq.wqe_cnt causes signed integer overflow, which
is undefined behavior, and yields a small or negative buf_size, causing
ib_umem_get() to map a buffer smaller than the hardware will actually
write into.
Replace the shifts and addition with check_shl_overflow() and
check_add_overflow(), rejecting invalid user inputs.
Moreover, guard the identical shift computing qp->sq.offset in
_create_user_qp() before set_user_buf_size() is reached.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260723-fix-qp-buf-size-overflow-v1-1-ccb05ee43a7b@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Decouple RoCE acceleration counters exposure from the roce_accl device
cap. The device cap is intended to protect the access to the roce_accl
register and was disabled on VFs for that purpose.
Reading the acceleration counters, however, does not involve that
register, the counters are read-only statistics that carry no
configuration risk. Gating their exposure on the capability therefore
needlessly hides useful diagnostic data on VFs.
Expose the counters on all functions regardless of the capability.
Signed-off-by: Michael Gur <michaelgur@nvidia.com>
Reviewed-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260723-expose-roce-accl-counters-v1-1-967618b550cd@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add an optional mlx5 driver-namespace UMEM attribute on SRQ create so
userspace can supply the doorbell record umem explicitly, symmetric to
the CQ and QP sides. Resolve it inside mlx5_ib_db_map_user() and use it
as a private DBR page when present; otherwise take the existing UHW
share-or-pin path that preserves per-page DBR sharing across CQ/QP/SRQ
in the same process.
Add mlx5's first UVERBS_OBJECT_SRQ UAPI definition chain to attach the
new attr.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260701124015.64350-4-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Use the per-attribute UMEM helper to pin the SRQ buffer umem on demand.
ib_umem_get_attr_or_va() resolves the new CREATE_SRQ_BUF_UMEM attribute
when present and otherwise falls back to the existing UHW ucmd->buf_addr
VA, preserving the legacy behavior.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260701124015.64350-3-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
mlx5r_umr_alloc_xlt() allocates physically contiguous scratch buffers
that are DMA mapped only in the DMA_TO_DEVICE direction. kmalloc()
provides the required contiguity and alignment for these sizes while
preserving the existing GFP allocation policy.
The emergency translation buffer has the same requirements. Convert all
of these UMR buffers to kmalloc() and release them with kfree(), which no
longer requires the caller to supply the allocation order.
Link: https://patch.msgid.link/20260715-get_pages-to-kmalloc-v1-4-b0b7fce288be@nvidia.com
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
'struct ib_frmr_pool_ops' and 'struct dma_buf_attach_ops' are not modified
in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
While at it, change a '1' into a 'true' into the mlx5_ib_dmabuf_attach_ops
structure. The 'allow_peer2peer' field is a bool and other usages of
'struct dma_buf_attach_ops' prefer using true/false.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
77631 10392 320 88343 15917 drivers/infiniband/hw/mlx5/mr.o
After:
=====
text data bss dec hex filename
77759 10264 320 88343 15917 drivers/infiniband/hw/mlx5/mr.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/22f2263c04cc94e242cee712e6e6d82b86ac353d.1784017128.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
mlx5_ib_mr_wqe_pfault_handler() allocates a scratch buffer for
parsing work queue entries during page fault handling.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260713-b4-rdma-v2-2-65d2a1a5180c@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The core always hands the driver's query_device() callback a zeroed
ib_device_attr. There are only two callers of the op and both clear the
structure before invoking it: setup_device() memsets &device->attrs, and
ib_uverbs_ex_query_device() passes an on-stack structure initialized to {}.
The open-coded memset(props, 0, sizeof(*props)) at the top of the driver
callbacks is therefore redundant. Remove it from all drivers.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
devx_free_subscription() can remain queued after the last DevX event file
drops its module reference or an auxiliary driver detaches its devices.
mlx5_ib can then unload before the callback runs.
Registration error unwind has the same risk because driver registration
can attach existing devices before failing. Wait after all drivers have
stopped.
Fixes: 6898d1c661 ("RDMA/mlx5: Use RCU and direct refcounts to keep memory alive")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-rdma/20260708092316.Qb39F_B0@linutronix.de/
Link: https://patch.msgid.link/20260709-unload-rcu-v1-2-fccd27211e5a@nvidia.com
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Remove extra asterisk to avoid the following kernel-doc warning:
Warning: drivers/infiniband/hw/mlx5/umr.c:986 This comment starts with '/**',
but isn't a kernel-doc comment. Refer to Documentation/doc-guide/kernel-doc.rst
Fixes: e73242aa14 ("RDMA/mlx5: Optimize DMABUF mkey page size")
Link: https://patch.msgid.link/r/20260629-kdoc-fix-v1-1-735a90dede7f@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Building mlx5 on s390 shows a rather high stack usage that can exceed
the warning limit when that is set to a lower but still reasonable value:
drivers/infiniband/hw/mlx5/wr.c:1051:5: error: stack frame size (1328) exceeds limit (1280) in 'mlx5_ib_post_send' [-Werror,-Wframe-larger-than]
The problem here is 'struct ib_reg_wr' on the stack of
handle_reg_mr_integrity(), which gets inlined into mlx5_ib_post_send()
along with a number of smaller functions.
Keeping the inner function out of line like gcc does avoids the
warning and reduces the total stack usage in other functions called
from mlx5_ib_post_send(), though handle_reg_mr_integrity() itself
still has the same problem as before.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260612201611.4127750-1-arnd@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Many AI driven bug fixes, and several big driver API cleanups
- Driver bug fixes and minor cleanups in mlx5, hns, rxe, efa, siw, rtrs,
mana, irdma, mlx4. Commonly error path flows, integer arithmetic
overflows on unsafe data, out of bounds access, and use after free
issues under races.
- Second half of the new udata API for drivers focusing on uAPI response
- bnxt_re supports more options for QP creation that will allow a dv
path in rdma-core
- Untangle the module dependencies so drivers don't link to ib_uverbs.ko
as was originall intended
- Provide a new way to handle umems with a consistent simplified uAPI and
update several drivers to use it. This brings dmabuf support to more
places and more drivers
- Support for mlx5 rate limit and packet pacing for UD and UC
- A batch of fixes for the new shared FRMR pools infrastructure
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCajLevAAKCRCFwuHvBreF
YVFuAP0X6gxaON+6cRGoaHp+KjxNj3zbuRj9VccTOy1OjerUdwD+LsbK/Pa9xrcO
ByA3LVvbw4BoQw9qcQpTu2klFuYV5g8=
=qnpN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Many AI driven bug fixes, and several big driver API cleanups
- Driver bug fixes and minor cleanups in mlx5, hns, rxe, efa, siw,
rtrs, mana, irdma, mlx4. Commonly error path flows, integer
arithmetic overflows on unsafe data, out of bounds access, and use
after free issues under races.
- Second half of the new udata API for drivers focusing on uAPI
response
- bnxt_re supports more options for QP creation that will allow a dv
path in rdma-core
- Untangle the module dependencies so drivers don't link to
ib_uverbs.ko as was originall intended
- Provide a new way to handle umems with a consistent simplified uAPI
and update several drivers to use it. This brings dmabuf support to
more places and more drivers
- Support for mlx5 rate limit and packet pacing for UD and UC
- A batch of fixes for the new shared FRMR pools infrastructure"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (148 commits)
RDMA/irdma: Replace waitqueue and flag with completion
RDMA/hns: Fix memory leak of bonding resources
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
docs: infiniband: correct name of option to enable the ib_uverbs module
RDMA/bnxt_re: Reject GET_TOGGLE_MEM when toggle page was not allocated
RDMA/bnxt_re: Fail DBR related page allocation UAPIs if the feature is disabled
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
RDMA/bnxt_re: Proper rollback if the ioremap fails
RDMA/bnxt_re: Add a max slot check for SQ
RDMA/bnxt_re: Avoid displaying the kernel pointer
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
RDMA/bnxt_re: Initialize dpi variable to zero
ABI: sysfs-class-infiniband: minor cleanup
RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one
RDMA/mlx5: Fix undefined shift of user RQ WQE size
RDMA/mlx5: Remove raw RSS QP restrack tracking
RDMA/mlx5: Remove DCT restrack tracking
RDMA/mlx5: Drop FRMR pool handle on UMR revoke failure
RDMA/core: Add ib_frmr_pool_drop for unrecoverable handles
...
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e ("net: txgbe: rework service event handling")
57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b7 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on
the user-provided rq_wqe_shift, which is only checked to be greater than
32, so shifts of 32 are still accepted. A shift of 31 also overflows a
signed integer, leading to undefined behavior.
Use check_shl_overflow() to compute the RQ WQE size and reject any
invalid values.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://patch.msgid.link/r/20260611-maher-sec-fixes-v1-1-cd8eb2542869@nvidia.com
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Raw RSS QP restrack tracking wasn't working to begin with as it was
only tracking the first raw RSS QP which was added, since at creation
the raw RSS QP number is reserved so the QP number for this qp type
was always zero.
The following raw RSS QP additions were always failing silently.
Since the fix isn't trivial and there were no users that required or
complained about this issue we are dropping this for now instead of fixing.
Fixes: 968f0b6f9c ("RDMA/mlx5: Consolidate into special function all create QP calls")
Link: https://patch.msgid.link/r/20260607-restrack-uaf-fix-v1-2-d72e45eb76c2@nvidia.com
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
DCT restrack tracking wasn't working to begin with as it was only
tracking the first DCT which was added, since at creation the DCT number
isn't yet initialized because the DCT FW object is only created during
modify. The following DCT additions were failing silently.
Since the fix isn't trivial and there were no users that required or
complained about this issue we are dropping this for now instead of fixing.
Fixes: fd3af5e218 ("RDMA/mlx5: Track DCT, DCI and REG_UMR QPs as diver_detail resources.")
Link: https://patch.msgid.link/r/20260607-restrack-uaf-fix-v1-1-d72e45eb76c2@nvidia.com
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When UMR revoke fails during MR cleanup, the handle is left in an
unknown state and cannot be returned to the pool. The driver already
destroys the mkey via the fallback path, but the pool's in_use counter
is never decremented, drifting upward over time.
Call ib_frmr_pool_drop on the revoke-failure path so the pool's
accounting stays consistent with the handles it has handed out.
Fixes: 36680ef7bc ("RDMA/mlx5: Switch from MR cache to FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-10-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Failure to push a handle to the pool, caused by ENOMEM on queue page
allocation, will trigger missing in_use counter update, skewing pool
state indefinitely.
Fix that by moving the handling of handle destruction in such case
into the FRMR code, ensuring the handle is either pushed to the pool
or destroyed inside the same function.
Adjust mlx5_ib call site accordingly.
Fixes: ce5df0b891 ("IB/core: Introduce FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-8-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix reading the PH value from the FRMR pool key by shifting the pool key
to the relevant bits.
Fixes: 36680ef7bc ("RDMA/mlx5: Switch from MR cache to FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-3-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the indices of mkeys destroyed in case of an error in batch mkey
creation.
Fixes: 36680ef7bc ("RDMA/mlx5: Switch from MR cache to FRMR pools")
Link: https://patch.msgid.link/r/20260610000145.820592-2-michaelgur@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When querying device, report packet pacing capabilities for UD and
UC QPs when device supports it.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-5-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow passing a rate limit attribute in modify QP flows even when the
QP is in a state that does not support packet pacing programming in
the lower layers.
When the user sets a rate limit during a QP transition that is not to
RTS, store the value in the mlx5 QP struct and program it to FW when
the QP later transitions to RTS, which is the state that allows
configuring the rate limit index in the QP context.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-4-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Rate limiting is currently supported only for raw packet QPs, where
the packet pacing index is programmed into the SQC during SQ modify.
Extend rate limit support to UD and UC QPs by setting the pacing
index in the QPC during RTR2RTS and RTS2RTS transitions.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-3-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Refactor the raw packet QP modify path to extract rate limit
configuration into a qp_rl_parse() helper that parses user attributes,
and a qp_rl_prepare() helper that handles FW rate limit table
adjustments before the SQ modify itself.
Use qp_rl_commit() to commit changes to QP once FW call
succeeds, and qp_rl_rollback() to rollback changes done to
the FW rate limit table in the prepare stage, in case the
modify operation fails.
These helpers will be reused for extending rate limit support to
additional QP types in the following patch.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-2-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove the mlx5_mr_pdn() in pagefault_real_mr() by pushing the pdn up, all
the callers use 0 since they don't pass MLX5_PF_FLAGS_ENABLE except the
ioctl reg_mr path which can use the ioctl pd.
Link: https://patch.msgid.link/r/9-v1-29ebd2c229b5+fd5-ib_mr_pd_jgg@nvidia.com
Assisted-by: Codex:gpt-5-5
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Keep pushing the pdn higher to remove more places touching mr->pd:
- XLT combinations that don't use PDN can just pass 0
- Use local pd values instead of mr->pd
- Implicit MR does not have inplace rereg, so the mr->pd is safe
Link: https://patch.msgid.link/r/8-v1-29ebd2c229b5+fd5-ib_mr_pd_jgg@nvidia.com
Assisted-by: Codex:gpt-5-5
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rereg protocol expects the core code to change mr->pd and synchronize
that change with the atomics and syncs. The driver should not touch it.
mlx5 needed to update it in umr_rereg_pas() because
mlx5r_umr_update_mr_pas() required the updated mr->pd to build the
UMR.
Simply switch mlx5r_umr_update_mr_pas() to use the pdn directly from
the new pd and remove the mr->pd update.
Fixes: 56e11d628c ("IB/mlx5: Added support for re-registration of MRs")
Link: https://patch.msgid.link/r/7-v1-29ebd2c229b5+fd5-ib_mr_pd_jgg@nvidia.com
Assisted-by: Codex:gpt-5-5
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of getting the pdn deep inside the umr code, pass it in from the
top. to_mpd(mr->ibmr.pd)->pdn is not safe due to the rereg races, so all
the call sites need some revision to obtain the pdn in a safe way.
Mark them with mlx5_mr_pdn(); following patches will go through and remove
these.
Cases where the XLT flags are known and do not require the PDN can pass 0,
such as for mlx5_ib_dmabuf_invalidate_cb().
Also extract the DMABUF data_direct special case from inside the UMR code
and into the only place that needs it, pagefault_dmabuf_mr(). The actual
mr was created directly without using the UMR flow. Ultimately this will
be moved into mlx5_ib_init_dmabuf_mr().
Link: https://patch.msgid.link/r/6-v1-29ebd2c229b5+fd5-ib_mr_pd_jgg@nvidia.com
Assisted-by: Codex:gpt-5-5
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HW only processes mkc fields selected by mkey_mask.
pd, qpn and mkey_7_0 are never selected so they can be left as zero.
This removes a racy read of mr->pd.
Fixes: e73242aa14 ("RDMA/mlx5: Optimize DMABUF mkey page size")
Link: https://patch.msgid.link/r/5-v1-29ebd2c229b5+fd5-ib_mr_pd_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Due to all the child mkeys in the implicit ODP configuration we cannot
change anything in place for the parent mkey. Instead the whole thing
needs to be rebuilt if any change is requested. If the user does not
specify a translation then force the implicit values which will then fall
through the logic into mlx5_ib_reg_user_mr() to allocate a completely new
MR.
Since implicit children were also touching the mr->pd, this removes
another case where the access was racy.
Fixes: ef3642c4f5 ("RDMA/mlx5: Fix error unwinds for rereg_mr")
Link: https://sashiko.dev/#/patchset/20260427-security-bug-fixes-v3-0-4621fa52de0e%40nvidia.com?part=4
Link: https://patch.msgid.link/r/3-v1-29ebd2c229b5+fd5-ib_mr_pd_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
DMABUF generally relies on the ODP EQ mechanism to safely implement the
move semantics. ODP requires a device-global one time startup of the ODP
machinery when the first MR is created, and this was missed on the DMABUF
path.
Call mlx5r_odp_create_eq() when creating a ODP'able DMABUF.
The core code prevents using IB_ACCESS_ON_DEMAND unless the driver
advertises IB_ODP_SUPPORT, so until now, mlx5r_odp_create_eq() cannot be
called unless the device has ODP support.
However, DMABUF has no such protection and a second bug was allowing
DMABUFs to be created on non-ODP capable HW. Add a guard at the start of
mlx5r_odp_create_eq(). This is necessary here anyhow as the
dev->odp_eq_mutex is not initialized without IB_ODP_SUPPORT.
Link: https://patch.msgid.link/r/2-v1-29ebd2c229b5+fd5-ib_mr_pd_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Jumping to mlx5_ib_reg_user_mr() without IB_MR_REREG_TRANS set will use
garbage values for start, length, and iova. Recovering the original mr
parameters for ODP and DMABUF to properly recreate it is too hard in this
flow, so just fail it.
Fixes: ef3642c4f5 ("RDMA/mlx5: Fix error unwinds for rereg_mr")
Link: https://patch.msgid.link/r/1-v1-29ebd2c229b5+fd5-ib_mr_pd_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be
re-evaluated to ensure it is properly pinned as RW. Since the umem is
hidden inside each driver's mr struct add a ib_umem_check_rereg() function
that each driver has to call before processing IB_MR_REREG_ACCESS.
mlx4 has to retain its duplicate ib_access_writable check because it
implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items
in place sequentially while the MR is live, so it will continue to not
support this combination.
Cc: stable@vger.kernel.org
Fixes: b40656aa7d ("RDMA/umem: remove FOLL_FORCE usage")
Link: https://patch.msgid.link/r/0-v1-06fb1a2d6cf5+107-rereg_access_jgg@nvidia.com
Reported-by: Philip Tsukerman <philiptsukerman@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In mlx5_ib_enable_lb(), dev->lb.enabled was unconditionally set
to true even if mlx5_nic_vport_update_local_lb() failed.
Fix this by only setting dev->lb.enabled on success. On failure,
roll back the reference counters and return the error.
Link: https://patch.msgid.link/r/20260601095818.2227-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
__mlx5_ib_add() currently returns -ENOMEM on any stage initialization
failure, losing the actual error code returned by the init function.
This makes it impossible for callers to distinguish between different
failure reasons (e.g. -EINVAL, -EIO, -EOPNOTSUPP) and leads to
misleading error handling.
Fix it by returning the actual error code stored in 'err'.
Link: https://patch.msgid.link/r/20260601095654.2178-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add an optional mlx5 driver-namespace UMEM attribute on QP
create so userspace can supply the doorbell record umem
explicitly, symmetric to the CQ side. Resolve it inside
mlx5_ib_db_map_user() and use it as a private DBR page when
present; otherwise take the existing UHW share-or-pin path
that preserves per-page DBR sharing across CQ/QP/SRQ in the
same process.
Add mlx5's first UVERBS_OBJECT_QP UAPI definition chain to
attach the new attr.
Link: https://patch.msgid.link/r/20260529134312.2836341-17-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add an optional mlx5 driver-namespace UMEM attribute on CQ
create so userspace can supply the doorbell record buffer
explicitly. mlx5_ib_db_map_user() resolves the attribute (or
falls back to the legacy UHW VA) into a struct
ib_uverbs_buffer_desc and runs a unified lookup-then-pin:
VA-typed descriptors share a per-page umem across CQ/QP/SRQ
in the same process, FD-typed descriptors are pinned per call.
Link: https://patch.msgid.link/r/20260529134312.2836341-16-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the per-attribute UMEM helpers to pin QP buffer umems on
demand. The QP-type predicate selects between the BUF and RQ_BUF
attrs; raw-packet SQ uses its own dedicated SQ_BUF attr.
Link: https://patch.msgid.link/r/20260529134312.2836341-14-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
