Remove aq_common_desc from all EFA admin command descriptors so that
command structs represent pure payloads. This allows attaching different
headers to the same command by copying the payload into the generic
header payload field. The admin header is now constructed in a single
place which improves separability.
Link: https://patch.msgid.link/r/20260812121718.2904349-2-ynachum@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the support needed to propagate the user requested flags to config
the CQ/QP to support 64-bit SQ request ID to the device.
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Tom Sela <tomsela@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20260722113331.2515247-2-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement completion counters for the EFA device. Each completion
counter is backed by two EFA event counters, one for success
completions and one for error completions.
The driver creates umem for counters from private descriptor ioctl
attributes using core utility.
Read operations are not implemented as the counter values are accessed
directly from userspace through the mapped memory.
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20260722083603.30334-7-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
On create AH, first check if the AH cache entry already exists and if
so, returns the already stored AH number. If the entry doesn't exist,
the driver creates it and calls the device to create the AH. A per-entry
mutex serializes concurrent device commands on the same AH cache entry,
ensuring only one thread issues the device create while others wait and
reuse the result. If the device create fails, the entry's user count
remains zero so subsequent threads will retry the device create.
On destroy AH, the user count is decremented under the entry mutex. If
it reaches zero, the driver issues the device destroy command. After
the device destroy completes, it removes the entry from the hashtable
and frees it if no other references exist. If new users arrived during
the destroy, the entry remains in the hashtable for reuse.
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20260706170008.1039417-3-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement the query port speed callback to report the port effective
bandwidth directly in 100 Mb/s granularity.
Link: https://patch.msgid.link/r/20260608083927.4116-1-tomsela@amazon.com
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Tom Sela <tomsela@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add new extended max inline query and report the new value to userspace.
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20260217112304.36849-3-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
As preparation for adding a second queue attributes query, change the
name of the existing queue attributes.
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20260217112304.36849-2-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set port link speed and width based on max bandwidth acquired from the
device instead of using constant 100 Gbps. Use a default value in case
the device didn't set the field.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20241030093006.21352-1-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Using modify QP with AH attributes and IB_QP_AV flag set doesn't make
much sense for connectionless QP types like SRD. Add SL parameter to EFA
create QP user ABI and pass it to the device.
Link: https://patch.msgid.link/r/20241015174242.3490-3-mrgolin@amazon.com
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Propagate the unique, per device, ID in the device attributes to the
standard node_guid value in IB device.
Link: https://patch.msgid.link/r/20240822171143.2800-1-mrgolin@amazon.com
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Yehuda Yitschak <yehuday@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new EFA flags attribute for QP creation, and support unsolicited
write with immediate flag. QPs created with this flag set will not
consume receive work requests for incoming RDMA write with immediate.
Expose device capability bit for this feature support.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://lore.kernel.org/r/20240506151829.6475-1-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add EFA driver uapi definitions and register a new query MR method that
currently returns the physical interconnects the device is using to
reach the MR. Update admin definitions and efa-abi accordingly.
Reviewed-by: Anas Mousa <anasmous@amazon.com>
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://lore.kernel.org/r/20240104095155.10676-1-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Update device API and request RDMA write counters if RDMA write is
supported by device. Expose newly added counters through ib core
counters mechanism.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://lore.kernel.org/r/20230703153404.30877-1-mrgolin@amazon.com
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add a parameter for create CQ admin command to set source address on
receive completion descriptors. Report capability for this feature
through query device verb.
Link: https://lore.kernel.org/r/20220818140449.414-1-mrgolin@amazon.com
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This patch adds support for CQ notifications through the standard verbs
api.
In order to achieve that, a new event queue (EQ) object is introduced,
which is in charge of reporting completion events to the driver. On
driver load, EQs are allocated and their affinity is set to a single
cpu. When a user app creates a CQ with a completion channel, the
completion vector number is converted to a EQ number, which is in charge
of reporting the CQ events.
In addition, the CQ creation admin command now returns an offset for the
CQ doorbell, which is mapped to the userspace provider and is used to arm
the CQ when requested by the user.
The EQs use a single doorbell (located on the registers BAR), which
encodes the EQ number and arm as part of the doorbell value. The EQs are
polled by the driver on each new EQE, and arm it when the poll is
completed.
Link: https://lore.kernel.org/r/20211003105605.29222-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add separate stats types for send messages and RDMA read work requests.
Link: https://lore.kernel.org/r/20200915141449.8428-3-galpress@amazon.com
Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch introduces the ability to configure SRD QPs with the RNR retry
parameter when issuing a modify QP command.
In addition, a capability bit was added to report support to the userspace
library.
Link: https://lore.kernel.org/r/20200731060420.17053-5-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The device reports the minimum SQ size required for creation.
This patch queries the min SQ size and reports it back to the userspace
library.
Link: https://lore.kernel.org/r/20200722140312.3651-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Shadi Ammouri <sammouri@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The device reports the maximum number of bytes to be written before
ringing the doorbell (zero means unlimited).
This patch queries the max batch size and reports it back to the userspace
library.
Link: https://lore.kernel.org/r/20200722140312.3651-2-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The host info feature allows the driver to infrom the EFA device
firmware with system configuration for debugging and troubleshooting
purposes.
The host info buffer is passed as an admin command DMA mapped control
buffer, and is unmapped and freed once the command CQE is consumed.
Currently, the setting of host info is done for each device on its
probe. Failing to set the host info for the device shall not disturb the
probe flow, any errors will be discarded.
Link: https://lore.kernel.org/r/20200512152204.93091-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When using a control buffer the ctrl_data bit should be set in order to
indicate the control buffer address is valid, not ctrl_data_indirect
which is used when the control buffer itself is indirect.
Fixes: e9c6c53730 ("RDMA/efa: Add common command handlers")
Link: https://lore.kernel.org/r/20200512152204.93091-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use unified macros for device structs access instead of open coding the
shifts and masks over and over again.
Link: https://lore.kernel.org/r/20200225114010.21790-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Query the device attributes for RDMA operations, including maximum
transfer size and maximum number of SGEs per RDMA WR, and report them
back to the userspace library.
Link: https://lore.kernel.org/r/20191121141509.59297-4-galpress@amazon.com
Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable remote read access for memory regions in order to support RDMA
operations.
Link: https://lore.kernel.org/r/20191121141509.59297-3-galpress@amazon.com
Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There's no reason to separate the network attributes from all other
device attributes. Embed the fields inside the device attributes and
query them all in one function.
Link: https://lore.kernel.org/r/20191121141509.59297-2-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The error print should indicate that it failed to get the queue
attributes, not network attributes.
Link: https://lore.kernel.org/r/20190910134301.4194-2-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Admin queue error prints should never happen unless something wrong
happened to the device. However, in the unfortunate case that it does,
we should take extra care not to flood the log with error messages.
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Link: https://lore.kernel.org/r/20190801171447.54440-3-galpress@amazon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Os1seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGtx4H/j6i482XzcGFKTBm
A7mBoQpy+kLtoUov4EtBAR62OuwI8rsahW9di37QKndPoQrczWaKBmr3De6LCdPe
v3pl3O6wBbvH5ru+qBPFX9PdNbDvimEChh7LHxmMxNQq3M+AjZAZVJyfpoiFnx35
Fbge+LZaH/k8HMwZmkMr5t9Mpkip715qKg2o9Bua6dkH0AqlcpLlC8d9a+HIVw/z
aAsyGSU8jRwhoAOJsE9bJf0acQ/pZSqmFp0rDKqeFTSDMsbDRKLGq/dgv4nW0RiW
s7xqsjb/rdcvirRj3rv9+lcTVkOtEqwk0PVdL9WOf7g4iYrb3SOIZh8ZyViaDSeH
VTS5zps=
=huBY
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc6' into rdma.git for-next
For dependencies in next patches.
Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX conflict
- Resolve list appends in mlx5_command_str()
- Use u16 for vport_rule stuff
- Resolve list appends in struct ib_client
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The EFA driver is written with success oriented flows in mind, meaning
that functions should mostly end with a return 0 statement.
Error flows return their error value on their own instead of assuming
that the function will return the error at the end.
This commit fixes a bunch of functions that were not aligned with this
behavior.
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Existing code would mistakenly return success in case of error instead
of a proper return value.
Fixes: e9c6c53730 ("RDMA/efa: Add common command handlers")
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove leftover includes that are no longer used from the driver.
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the EFA common commands implementation.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
