This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
When running with a paravisor or in the root partition, the SynIC event and
message pages are provided by the paravisor or hypervisor respectively,
instead of being allocated by Linux. The provided pages are normal memory,
but are outside of the physical address space seen by Linux. As such they
cannot be accessed via the kernel's direct map, and must be explicitly
mapped to a kernel virtual address.
Current code uses ioremap_cache() and iounmap() to map and unmap the pages.
These functions are for use on I/O address space that may not behave as
normal memory, so they generate or expect addresses with the __iomem
attribute. For normal memory, the preferred functions are memremap() and
memunmap(), which operate similarly but without __iomem.
At the time of the original work on CoCo VMs on Hyper-V, memremap() did not
support creating a decrypted mapping, so ioremap_cache() was used instead,
since I/O address space is always mapped decrypted. memremap() has since
been enhanced to allow decrypted mappings, so replace ioremap_cache() with
memremap() when mapping the event and message pages. Similarly, replace
iounmap() with memunmap(). As a side benefit, the replacement cleans up
'sparse' warnings about __iomem mismatches.
The replacement is done to use the correct functions as long-term goodness
and to clean up the sparse warnings. No runtime bugs are fixed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601170445.JtZQwndW-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202512150359.fMdmbddk-lkp@intel.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
MSHV_VTL driver is going to be introduced, which is supposed to
provide interface for Virtual Machine Monitors (VMMs) to control
Virtual Trust Level (VTL). Export the symbols needed
to make it work (vmbus_isr, hv_context and hv_post_message).
Co-developed-by: Roman Kisel <romank@linux.microsoft.com>
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Co-developed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506110544.q0NDMQVc-lkp@intel.com/
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The confidential VMBus runs with the paravisor SynIC and requires
configuring it with the paravisor.
Add the functions for configuring the paravisor SynIC. Update
overall SynIC initialization logic to initialize the SynIC if it
is present. Finally, break out SynIC interrupt enable/disable
code into separate functions so that SynIC interrupts can be
enabled or disabled via the paravisor instead of the hypervisor
if the paravisor SynIC is present.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The confidential VMBus requires support for the both hypervisor
facing SynIC and the paravisor one.
Rename the functions that enable and disable SynIC with the
hypervisor. No functional changes.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
It might happen that some hyp SynIC pages aren't allocated.
Check for that and only then call iounmap().
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The comment about the x2v shim is ancient and long since incorrect.
Remove the incorrect comment.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When the confidential VMBus is available, the guest should post
messages to the paravisor.
Update hv_post_message() to post messages to the paravisor rather than
through GHCB or TD calls.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Confidential VMBus requires interacting with two SynICs -- one
provided by the host hypervisor, and one provided by the paravisor.
Each SynIC requires its own message and event pages.
Refactor and extend the existing code to add allocating and freeing
the message and event pages for the paravisor SynIC when it is
present.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Confidential VMBus requires interacting with two SynICs -- one
provided by the host hypervisor, and one provided by the paravisor.
Each SynIC requires its own message and event pages.
Rename the existing host-accessible SynIC message and event pages
with the "hyp_" prefix to clearly distinguish them from the paravisor
ones. The field name is also changed in mshv_root.* for consistency.
No functional changes.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When Secure AVIC is enabled, VMBus driver should
call x2apic Secure AVIC interface to allow Hyper-V
to inject VMBus message interrupt.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When running nested, these hypercalls must be sent to the L0 hypervisor
or VMBus will fail.
Remove hv_do_nested_hypercall() and hv_do_fast_nested_hypercall8()
altogether and open-code these cases, since there are only 2 and all
they do is add the nested bit.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1752261532-7225-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1752261532-7225-2-git-send-email-nunodasneves@linux.microsoft.com>
Factor out the check for enabling auto eoi, to be reused in root
partition code.
No functional changes.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com>
Introduce hv_curr_partition_type to store the partition type
as an enum.
Right now this is limited to guest or root partition, but there will
be other kinds in future and the enum is easily extensible.
Set up hv_curr_partition_type early in Hyper-V initialization with
hv_identify_partition_type(). hv_root_partition() just queries this
value, and shouldn't be called before that.
Making this check into a function sets the stage for adding a config
option to gate the compilation of root partition code. In particular,
hv_root_partition() can be stubbed out always be false if root
partition support isn't desired.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com>
Currently, it is tedious to offline CPUs in a Hyper-V VM since CPUs may
have VMBus channels attached to them that a user would have to manually
rebind elsewhere. So, as made mention of in
commit d570aec0f2 ("Drivers: hv: vmbus: Synchronize init_vp_index()
vs. CPU hotplug"), rebind channels associated with CPUs that a user is
trying to offline to a new "randomly" selected CPU.
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250117203309.192072-3-hamzamahfooz@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250117203309.192072-3-hamzamahfooz@linux.microsoft.com>
When hv_synic_disable_regs was introduced, it received the description
of hv_synic_cleanup. Fix that.
Fixes: dba61cda30 ("Drivers: hv: vmbus: Break out synic enable and disable operations")
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/r/20240801212235.352220-1-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240801212235.352220-1-romank@linux.microsoft.com>
Fix issues reported by checkpatch.pl script in hv.c and
balloon.c
- Remove unnecessary parentheses
- Remove extra newlines
- Remove extra spaces
- Add spaces between comparison operators
- Remove comparison with NULL in if statements
No functional changes intended
Signed-off-by: Aditya Nagesh <adityanagesh@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1717152521-6439-1-git-send-email-adityanagesh@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1717152521-6439-1-git-send-email-adityanagesh@linux.microsoft.com>
The HV_REGISTER_ are used as arguments to hv_set/get_register(), which
delegate to arch-specific mechanisms for getting/setting synthetic
Hyper-V MSRs.
On arm64, HV_REGISTER_ defines are synthetic VP registers accessed via
the get/set vp registers hypercalls. The naming matches the TLFS
document, although these register names are not specific to arm64.
However, on x86 the prefix HV_REGISTER_ indicates Hyper-V MSRs accessed
via rdmsrl()/wrmsrl(). This is not consistent with the TLFS doc, where
HV_REGISTER_ is *only* used for used for VP register names used by
the get/set register hypercalls.
To fix this inconsistency and prevent future confusion, change the
arch-generic aliases used by callers of hv_set/get_register() to have
the prefix HV_MSR_ instead of HV_REGISTER_.
Use the prefix HV_X64_MSR_ for the x86-only Hyper-V MSRs. On x86, the
generic HV_MSR_'s point to the corresponding HV_X64_MSR_.
Move the arm64 HV_REGISTER_* defines to the asm-generic hyperv-tlfs.h,
since these are not specific to arm64. On arm64, the generic HV_MSR_'s
point to the corresponding HV_REGISTER_.
While at it, rename hv_get/set_registers() and related functions to
hv_get/set_msr(), hv_get/set_nested_msr(), etc. These are only used for
Hyper-V MSRs and this naming makes that clear.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com>
In ms_hyperv_init_platform(), do not distinguish between a SNP VM with
the paravisor and a SNP VM without the paravisor.
Replace hv_isolation_type_en_snp() with
!ms_hyperv.paravisor_present && hv_isolation_type_snp().
The hv_isolation_type_en_snp() in drivers/hv/hv.c and
drivers/hv/hv_common.c can be changed to hv_isolation_type_snp() since
we know !ms_hyperv.paravisor_present is true there.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-10-decui@microsoft.com
The post_msg_page was removed in
commit 9a6b1a170c ("Drivers: hv: vmbus: Remove the per-CPU post_msg_page")
However, it turns out that we need to bring it back, but only for a TDX VM
with the paravisor: in such a VM, the hyperv_pcpu_input_arg is not decrypted,
but the HVCALL_POST_MESSAGE in such a VM needs a decrypted page as the
hypercall input page: see the comments in hyperv_init() for a detailed
explanation.
Except for HVCALL_POST_MESSAGE and HVCALL_SIGNAL_EVENT, the other hypercalls
in a TDX VM with the paravisor still use hv_hypercall_pg and must use the
hyperv_pcpu_input_arg (which is encrypted in such a VM), when a hypercall
input page is used.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-8-decui@microsoft.com
The new variable hyperv_paravisor_present is set only when the VM
is a SNP/TDX VM with the paravisor running: see ms_hyperv_init_platform().
We introduce hyperv_paravisor_present because we can not use
ms_hyperv.paravisor_present in arch/x86/include/asm/mshyperv.h:
struct ms_hyperv_info is defined in include/asm-generic/mshyperv.h, which
is included at the end of arch/x86/include/asm/mshyperv.h, but at the
beginning of arch/x86/include/asm/mshyperv.h, we would already need to use
struct ms_hyperv_info in hv_do_hypercall().
We use hyperv_paravisor_present only in include/asm-generic/mshyperv.h,
and use ms_hyperv.paravisor_present elsewhere. In the future, we'll
introduce a hypercall function structure for different VM types, and
at boot time, the right function pointers would be written into the
structure so that runtime testing of TDX vs. SNP vs. normal will be
avoided and hyperv_paravisor_present will no longer be needed.
Call hv_vtom_init() when it's a VBS VM or when ms_hyperv.paravisor_present
is true, i.e. the VM is a SNP VM or TDX VM with the paravisor.
Enhance hv_vtom_init() for a TDX VM with the paravisor.
In hv_common_cpu_init(), don't decrypt the hyperv_pcpu_input_arg
for a TDX VM with the paravisor, just like we don't decrypt the page
for a SNP VM with the paravisor.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-7-decui@microsoft.com
Add Hyper-V specific code so that a fully enlightened TDX guest (i.e.
without the paravisor) can run on Hyper-V:
Don't use hv_vp_assist_page. Use GHCI instead.
Don't try to use the unsupported HV_REGISTER_CRASH_CTL.
Don't trust (use) Hyper-V's TLB-flushing hypercalls.
Don't use lazy EOI.
Share the SynIC Event/Message pages with the hypervisor.
Don't use the Hyper-V TSC page for now, because non-trivial work is
required to share the page with the hypervisor.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-4-decui@microsoft.com
Hypervisor needs to access input arg, VMBus synic event and
message pages. Mark these pages unencrypted in the SEV-SNP
guest and free them only if they have been marked encrypted
successfully.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-5-ltykernel@gmail.com
The panic reporting code was added in commit 81b18bce48
("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
It was added to the vmbus driver. The panic reporting has no dependence
on vmbus, and can be enabled at an earlier boot time when Hyper-V is
initialized.
This patch moves the panic reporting code out of vmbus. There is no
functionality changes. During moving, also refactored some cleanup
functions into hv_kmsg_dump_unregister().
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1682030946-6372-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The post_msg_page was introduced in 2014 in
commit b29ef3546a ("Drivers: hv: vmbus: Cleanup hv_post_message()")
Commit 68bb7bfb79 ("X86/Hyper-V: Enable IPI enlightenments") introduced
the hyperv_pcpu_input_arg in 2018, which can be used in hv_post_message().
Remove post_msg_page to simplify the code a little bit.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Jinank Jain <jinankjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20230408213441.15472-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
With the vTOM bit now treated as a protection flag and not part of
the physical address, avoid remapping physical addresses with vTOM set
since technically such addresses aren't valid. Use ioremap_cache()
instead of memremap() to ensure that the mapping provides decrypted
access, which will correctly set the vTOM bit as a protection flag.
While this change is not required for correctness with the current
implementation of memremap(), for general code hygiene it's better to
not depend on the mapping functions doing something reasonable with
a physical address that is out-of-range.
While here, fix typos in two error messages.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-12-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Child partitions are free to allocate SynIC message and event page but in
case of root partition it must use the pages allocated by Microsoft
Hypervisor (MSHV). Base address for these pages can be found using
synthetic MSRs exposed by MSHV. There is a slight difference in those MSRs
for nested vs non-nested root partition.
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/cb951fb1ad6814996fc54f4a255c5841a20a151f.1672639707.git.jinankjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
hyperv provides ghcb hvcall to handle VMBus
HVCALL_SIGNAL_EVENT and HVCALL_POST_MESSAGE
msg in SNP Isolation VM. Add such support.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-8-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyperv provides GHCB protocol to write Synthetic Interrupt
Controller MSR registers in Isolation VM with AMD SEV SNP
and these registers are emulated by hypervisor directly.
Hyperv requires to write SINTx MSR registers twice. First
writes MSR via GHCB page to communicate with hypervisor
and then writes wrmsr instruction to talk with paravisor
which runs in VMPL0. Guest OS ID MSR also needs to be set
via GHCB page.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-7-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
There is not a consistent pattern for checking Hyper-V hypercall status.
Existing code uses a number of variants. The variants work, but a consistent
pattern would improve the readability of the code, and be more conformant
to what the Hyper-V TLFS says about hypercall status.
Implemented new helper functions hv_result(), hv_result_success(), and
hv_repcomp(). Changed the places where hv_do_hypercall() and related variants
are used to use the helper functions.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1618620183-9967-2-git-send-email-joseph.salisbury@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Check that enough time has passed such that the modify channel message
has been processed before taking a CPU offline.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210416143449.16185-4-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
VMbus interrupts are most naturally modelled as per-cpu IRQs. But
because x86/x64 doesn't have per-cpu IRQs, the core VMbus interrupt
handling machinery is done in code under arch/x86 and Linux IRQs are
not used. Adding support for ARM64 means adding equivalent code
using per-cpu IRQs under arch/arm64.
A better model is to treat per-cpu IRQs as the normal path (which it is
for modern architectures), and the x86/x64 path as the exception. Do this
by incorporating standard Linux per-cpu IRQ allocation into the main VMbus
driver, and bypassing it in the x86/x64 exception case. For x86/x64,
special case code is retained under arch/x86, but no VMbus interrupt
handling code is needed under arch/arm64.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/1614721102-2241-7-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
On x86/x64, Hyper-V provides a flag to indicate auto EOI functionality,
but it doesn't on ARM64. Handle this quirk inline instead of calling
into code under arch/x86 (and coming, under arch/arm64).
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/1614721102-2241-6-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Current code defines a separate get and set macro for each Hyper-V
synthetic MSR used by the VMbus driver. Furthermore, the get macro
can't be converted to a standard function because the second argument
is modified in place, which is somewhat bad form.
Redo this by providing a single get and a single set function that
take a parameter specifying the MSR to be operated on. Fixup usage
of the get function. Calling locations are no more complex than before,
but the code under arch/x86 and the upcoming code under arch/arm64
is significantly simplified.
Also standardize the names of Hyper-V synthetic MSRs that are
architecture neutral. But keep the old x86-specific names as aliases
that can be removed later when all references (particularly in KVM
code) have been cleaned up in a separate patch series.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/1614721102-2241-4-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The Hyper-V page allocator functions are implemented in an architecture
neutral way. Move them into the architecture neutral VMbus module so
a separate implementation for ARM64 is not needed.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/1614721102-2241-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl+ytzsTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXtgkCADLbUGTwl/XXWEMBVASxk9rX9s6ONoN
qoEZXZ6OcleziWmYoxqcyHUKcbNNmN31iKcw4wuld7jHQJSExcwxbPCYS2mAlBUb
urHbPgm7u0u+9rILQi1Qbp5fHP8uQAvDKxe8sKXXzDvnWUNNVSyKlv3nj0kyN8zi
SmpAszx5cdxXkyzwtnsL5GlUkVHyoGF03wMomcMnWgKZh4xsdIOQm5M0xrDFBqiY
Lu+GK62845ZZgIyop4AN74bPNNPWDV29SnU8GMN7neFELdiIOPI1QbDX65qn0QTT
W+oKtv52JVDkYLi7fTY5JUoM7O1eek3DFdvB9ig4QJdNdQ9YkJvnogsM
=1shq
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fix from Wei Liu:
"One patch from Chris to fix kexec on Hyper-V"
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Allow cleanup of VMBUS_CONNECT_CPU if disconnected
When invoking kexec() on a Linux guest running on a Hyper-V host, the
kernel panics.
RIP: 0010:cpuhp_issue_call+0x137/0x140
Call Trace:
__cpuhp_remove_state_cpuslocked+0x99/0x100
__cpuhp_remove_state+0x1c/0x30
hv_kexec_handler+0x23/0x30 [hv_vmbus]
hv_machine_shutdown+0x1e/0x30
machine_shutdown+0x10/0x20
kernel_kexec+0x6d/0x96
__do_sys_reboot+0x1ef/0x230
__x64_sys_reboot+0x1d/0x20
do_syscall_64+0x6b/0x3d8
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This was due to hv_synic_cleanup() callback returning -EBUSY to
cpuhp_issue_call() when tearing down the VMBUS_CONNECT_CPU, even
if the vmbus_connection.conn_state = DISCONNECTED. hv_synic_cleanup()
should succeed in the case where vmbus_connection.conn_state
is DISCONNECTED.
Fix is to add an extra condition to test for
vmbus_connection.conn_state == CONNECTED on the VMBUS_CONNECT_CPU and
only return early if true. This way the kexec() path can still shut
everything down while preserving the initial behavior of preventing
CPU offlining on the VMBUS_CONNECT_CPU while the VM is running.
Fixes: 8a857c5542 ("Drivers: hv: vmbus: Always handle the VMBus messages on CPU0")
Signed-off-by: Chris Co <chrco@microsoft.com>
Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201110190118.15596-1-chrco@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
On ARM64, Hyper-V now specifies the interrupt to be used by VMbus
in the ACPI DSDT. This information is not used on x86 because the
interrupt vector must be hardcoded. But update the generic
VMbus driver to do the parsing and pass the information to the
architecture specific code that sets up the Linux IRQ. Update
consumers of the interrupt to get it from an architecture specific
function.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1597434304-40631-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Both the base_*_gpa should use the guest page number in Hyper-V page, so
use HV_HYP_PAGE instead of PAGE.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200916034817.30282-5-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Additions/deletions to/from sc_list (as well as modifications of
target_cpu(s)) are protected by channel_mutex, which hv_synic_cleanup()
and vmbus_bus_suspend() own for the duration of the channel->lock
critical section in question.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20200617164642.37393-5-parri.andrea@gmail.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl7WhbkTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXlUnB/0R8dBVSeRfNmyJaadBWKFc/LffwKLD
CQ8PVv22ffkCaEYV2tpnhS6NmkERLNdson4Uo02tVUsjOJ4CrWHTn7aKqYWZyA+O
qv/PiD9TBXJVYMVP2kkyaJlK5KoqeAWBr2kM16tT0cxQmlhE7g0Xo2wU9vhRbU+4
i4F0jffe4lWps65TK392CsPr6UEv1HSel191Py5zLzYqChT+L8WfahmBt3chhsV5
TIUJYQvBwxecFRla7yo+4sUn37ZfcTqD1hCWSr0zs4psW0ge7d80kuaNZS+EqxND
fGm3Bp1BlUuDKsJ/D+AaHLCR47PUZ9t9iMDjZS/ovYglLFwi+h3tAV+W
=LwVR
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyper-v updates from Wei Liu:
- a series from Andrea to support channel reassignment
- a series from Vitaly to clean up Vmbus message handling
- a series from Michael to clean up and augment hyperv-tlfs.h
- patches from Andy to clean up GUID usage in Hyper-V code
- a few other misc patches
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (29 commits)
Drivers: hv: vmbus: Resolve more races involving init_vp_index()
Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug
vmbus: Replace zero-length array with flexible-array
Driver: hv: vmbus: drop a no long applicable comment
hyper-v: Switch to use UUID types directly
hyper-v: Replace open-coded variant of %*phN specifier
hyper-v: Supply GUID pointer to printf() like functions
hyper-v: Use UUID API for exporting the GUID (part 2)
asm-generic/hyperv: Add definitions for Get/SetVpRegister hypercalls
x86/hyperv: Split hyperv-tlfs.h into arch dependent and independent files
x86/hyperv: Remove HV_PROCESSOR_POWER_STATE #defines
KVM: x86: hyperv: Remove duplicate definitions of Reference TSC Page
drivers: hv: remove redundant assignment to pointer primary_channel
scsi: storvsc: Re-init stor_chns when a channel interrupt is re-assigned
Drivers: hv: vmbus: Introduce the CHANNELMSG_MODIFYCHANNEL message type
Drivers: hv: vmbus: Synchronize init_vp_index() vs. CPU hotplug
Drivers: hv: vmbus: Remove the unused HV_LOCALIZED channel affinity logic
PCI: hv: Prepare hv_compose_msi_msg() for the VMBus-channel-interrupt-to-vCPU reassignment functionality
Drivers: hv: vmbus: Use a spin lock for synchronizing channel scheduling vs. channel removal
hv_utils: Always execute the fcopy and vss callbacks in a tasklet
...
init_vp_index() may access the cpu_online_mask mask via its calls of
cpumask_of_node(). Make sure to protect these accesses with a
cpus_read_lock() critical section.
Also, remove some (hardcoded) instances of CPU(0) from init_vp_index()
and replace them with VMBUS_CONNECT_CPU. The connect CPU can not go
offline, since Hyper-V does not provide a way to change it.
Finally, order the accesses of target_cpu from init_vp_index() and
hv_synic_cleanup() by relying on the channel_mutex; this is achieved
by moving the call of init_vp_index() into vmbus_process_offer().
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20200406001514.19876-10-parri.andrea@gmail.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When Hyper-V sends an interrupt to the guest, the guest has to figure
out which channel the interrupt is associated with. Hyper-V sets a bit
in a memory page that is shared with the guest, indicating a particular
"relid" that the interrupt is associated with. The current Linux code
then uses a set of per-CPU linked lists to map a given "relid" to a
pointer to a channel structure.
This design introduces a synchronization problem if the CPU that Hyper-V
will interrupt for a certain channel is changed. If the interrupt comes
on the "old CPU" and the channel was already moved to the per-CPU list
of the "new CPU", then the relid -> channel mapping will fail and the
interrupt is dropped. Similarly, if the interrupt comes on the new CPU
but the channel was not moved to the per-CPU list of the new CPU, then
the mapping will fail and the interrupt is dropped.
Relids are integers ranging from 0 to 2047. The mapping from relids to
channel structures can be done by setting up an array with 2048 entries,
each entry being a pointer to a channel structure (hence total size ~16K
bytes, which is not a problem). The array is global, so there are no
per-CPU linked lists to update. The array can be searched and updated
by loading from/storing to the array at the specified index. With no
per-CPU data structures, the above mentioned synchronization problem is
avoided and the relid2channel() function gets simpler.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
A Linux guest have to pick a "connect CPU" to communicate with the
Hyper-V host. This CPU can not be taken offline because Hyper-V does
not provide a way to change that CPU assignment.
Current code sets the connect CPU to whatever CPU ends up running the
function vmbus_negotiate_version(), and this will generate problems if
that CPU is taken offine.
Establish CPU0 as the connect CPU, and add logics to prevents the
connect CPU from being taken offline. We could pick some other CPU,
and we could pick that "other CPU" dynamically if there was a reason to
do so at some point in the future. But for now, #defining the connect
CPU to 0 is the most straightforward and least complex solution.
While on this, add inline comments explaining "why" offer and rescind
messages should not be handled by a same serialized work queue.
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20200406001514.19876-2-parri.andrea@gmail.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyper-V on ARM64 doesn't provide a flag for the AEOI recommendation
in ms_hyperv.hints, so having the test in architecture independent
code doesn't work. Resolve this by moving the check of the flag
to an architecture dependent helper function. No functionality is
changed.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200420164926.24471-1-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyper-V has historically initialized stimer-based clockevents late in the
process of onlining a CPU because clockevents depend on stimer
interrupts. In the original Hyper-V design, stimer interrupts generate a
VMbus message, so the VMbus machinery must be running first, and VMbus
can't be initialized until relatively late. On x86/64, LAPIC timer based
clockevents are used during early initialization before VMbus and
stimer-based clockevents are ready, and again during CPU offlining after
the stimer clockevents have been shut down.
Unfortunately, this design creates problems when offlining CPUs for
hibernation or other purposes. stimer-based clockevents are shut down
relatively early in the offlining process, so clockevents_unbind_device()
must be used to fallback to the LAPIC-based clockevents for the remainder
of the offlining process. Furthermore, the late initialization and early
shutdown of stimer-based clockevents doesn't work well on ARM64 since there
is no other timer like the LAPIC to fallback to. So CPU onlining and
offlining doesn't work properly.
Fix this by recognizing that stimer Direct Mode is the normal path for
newer versions of Hyper-V on x86/64, and the only path on other
architectures. With stimer Direct Mode, stimer interrupts don't require any
VMbus machinery. stimer clockevents can be initialized and shut down
consistent with how it is done for other clockevent devices. While the old
VMbus-based stimer interrupts must still be supported for backward
compatibility on x86, that mode of operation can be treated as legacy.
So add a new Hyper-V stimer entry in the CPU hotplug state list, and use
that new state when in Direct Mode. Update the Hyper-V clocksource driver
to allocate and initialize stimer clockevents earlier during boot. Update
Hyper-V initialization and the VMbus driver to use this new design. As a
result, the LAPIC timer is no longer used during boot or CPU
onlining/offlining and clockevents_unbind_device() is not called. But
retain the old design as a legacy implementation for older versions of
Hyper-V that don't support Direct Mode.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lkml.kernel.org/r/1573607467-9456-1-git-send-email-mikelley@microsoft.com
Break out synic enable and disable operations into separate
hv_synic_disable_regs() and hv_synic_enable_regs() functions for use by a
later patch to support hibernation.
There is no functional change except the unnecessary check
"if (sctrl.enable != 1) return -EFAULT;" which is removed, because when
we're in hv_synic_cleanup(), we're absolutely sure sctrl.enable must be 1.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hyper-V clock/timer code and data structures are currently mixed
in with other code in the ISA independent drivers/hv directory as
well as the ISA dependent Hyper-V code under arch/x86.
Consolidate this code and data structures into a Hyper-V clocksource driver
to better follow the Linux model. In doing so, separate out the ISA
dependent portions so the new clocksource driver works for x86 and for the
in-process Hyper-V on ARM64 code.
To start, move the existing clockevents code to create the new clocksource
driver. Update the VMbus driver to call initialization and cleanup routines
since the Hyper-V synthetic timers are not independently enumerated in
ACPI.
No behavior is changed and no new functionality is added.
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "bp@alien8.de" <bp@alien8.de>
Cc: "will.deacon@arm.com" <will.deacon@arm.com>
Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com>
Cc: "mark.rutland@arm.com" <mark.rutland@arm.com>
Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org>
Cc: "olaf@aepfle.de" <olaf@aepfle.de>
Cc: "apw@canonical.com" <apw@canonical.com>
Cc: "jasowang@redhat.com" <jasowang@redhat.com>
Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com>
Cc: Sunil Muthuswamy <sunilmut@microsoft.com>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: "sashal@kernel.org" <sashal@kernel.org>
Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com>
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org>
Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org>
Cc: "arnd@arndb.de" <arnd@arndb.de>
Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk>
Cc: "ralf@linux-mips.org" <ralf@linux-mips.org>
Cc: "paul.burton@mips.com" <paul.burton@mips.com>
Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>
Cc: "salyzyn@android.com" <salyzyn@android.com>
Cc: "pcc@google.com" <pcc@google.com>
Cc: "shuah@kernel.org" <shuah@kernel.org>
Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com>
Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk>
Cc: "huw@codeweavers.com" <huw@codeweavers.com>
Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au>
Cc: "pbonzini@redhat.com" <pbonzini@redhat.com>
Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com>
Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org>
Link: https://lkml.kernel.org/r/1561955054-1838-2-git-send-email-mikelley@microsoft.com
