Currently HID_PHYS is empty, which means userspace tools (e.g. fwupd)
that depend on it for distinguishing the devices, are unable to do so.
Other drivers like i2c-hid, usbhid, surface-hid, all populate it.
With this change it's set to, for example: HID_PHYS=0000:00:10.0
Each function has just a single HID device, as far as I can tell, so
there is no need to add a suffix.
Tested with fwupd 2.1.1, can avoid https://github.com/fwupd/fwupd/pull/9995
Cc: Even Xu <even.xu@intel.com>
Cc: Xinpeng Sun <xinpeng.sun@intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Daniel Schaefer <git@danielschaefer.me>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Send POWER_SLEEP command to touch device when system enters into sleep
mode or hibernate mode to save more power; and send POWER_ON command to
take device back when system exits sleep mode.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for HID output reports in the intel-quicki2c driver by
implementing the output_report callback in the HID low-level driver
interface.
This enables proper communication with HID devices that require
output report functionality, such as setting device configuration or
updating device firmware.
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There are two output formats requested in the HID-over-I2C specification:
- Command format (set feature/set report): encoded command written to
command register, followed by data written to data register
- Output report format: all data written directly to output register
Current quicki2c_init_write_buf() implementation only supports the
command format.
Extend quicki2c_init_write_buf() to automatically detect the output
format based on the presence of command parameters and prepare the
appropriate output buffer accordingly.
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Replace memcpy operations with put_unaligned_le16() when writing 16-bit
little-endian values to the write buffer.
This change improves code clarity and ensures proper handling of unaligned
memory access.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Convert all length-related variables in the QuickI2C protocol layer to use
size_t type to follow kernel coding conventions.
This includes:
- All buffer length parameters and variables
- Return values of quicki2c_encode_cmd() function which represents
encoded command buffer size.
- Return values of quicki2c_init_write_buf() function which represents
process result: either prepared output buffer size or error code.
This change improves type consistency and aligns with standard kernel
practices for memory size representation, reducing potential issues
with size calculations and comparisons.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The type definition of qcdev->i2c_max_frame_size is already
u32, so remove the unnecessary type casting le16_to_cpu.
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509280841.pxmgBzKW-lkp@intel.com/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There is a new BIOS enhancement that adds the capability to configure the
following two features of I2C subsystem introduced in commit 1ed0b48
("Intel-thc: Introduce max input size control") and commit 3f2a921
("Intel-thc: Introduce interrupt delay control"):
- Max input size control
- Interrupt delay control
As BIOS is used for the configuration of these two features, change driver
data usage to indicate hardware capability, and add corresponding ACPI
configuration support in QuickI2C driver.
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
After driver module is removed and during re-install stage, if there
is continueous user touching on the screen, it is a risk impacting
THC hardware initialization which causes driver installation failure.
This patch enhances this flow by quiescing the external touch
interrupt after driver is removed which keeps THC hardware
ignore external interrupt during this remove and re-install stage.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Fixes: 66b59bfce6 ("HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driver")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
- support for Wake-on-touch in intel-thc (Even Xu)
- support for "Input max input size control" and "Input interrupt delay"
I2C features in order to improve compatibility of THC devices with
legacy HIDI2C touch devices (Even Xu)
This patch call THC helper functions to enable Wake-on-Touch (WoT)
during driver initialization and disable it when driver is removed.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
During customer board enabling, it was found: some touch devices
prepared reset response, but either forgot sending interrupt or
THC missed reset interrupt because of timing issue. THC QuickI2C
driver depends on interrupt to read reset response, in this case,
it will cause driver waiting timeout.
This patch enhances the flow by adding manually reset response
reading after waiting for reset interrupt timeout.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Fixes: 66b59bfce6 ("HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driver")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
On Panther Lake platform (PTL), THC hardware introduces two new features
for I2C subsystem:
- Input max input size control
- Input interrupt delay
This patch adds above new advanced features into QuickI2C driver, and
enables max input size control feature on PTL to improve QuickI2C
driver compatibility.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch defines driver data structure and adds it into QuickI2C
device structure. Changes PCI ID table to use PCI_DEVICE_DATA() to
pass platform specific driver data into driver, let driver has
capability to enable different hardware features according to
different platform driver data.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Align capitalization of the first characters for all code comments and
refine some descriptions.
Signed-off-by: Even Xu <even.xu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
intel-thc-hid reintroduced the already deprecated PCI API functions
pcim_iomap_table(),
pcim_iomap_regions(),
pcim_iounmap_regions(),
none of which should be used anymore.
Furthermore, calling managed (pcim_*) functions in remove() and probe()
for cleanup is not necessary, since the managed functions clean up
automatically.
Replace / remove the deprecated functions.
Fixes: 61bb2714dc ("HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver skeleton")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use U32 to get value from ACPI and explicitly cast to U16.
Fixes: 5282e45ccb ("HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C ACPI interfaces")
Signed-off-by: Even Xu <even.xu@intel.com>
Link: https://patch.msgid.link/20250113085047.2100403-1-even.xu@intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Intel QuickI2C driver uses THC hardware to accelerate HID over I2C
(HIDI2C) protocol flow.
This patch implements all data flows described in HID over I2C protocol
SPEC by using THC hardware layer APIs.
HID over I2C SPEC:
https://learn.microsoft.com/en-us/previous-versions/windows/hardware/design/dn642101(v=vs.85)
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add functions to query QuickI2C ACPI DSM/DSD parameters and use these
APIs to access all QuickI2C ACPI resources.
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add HID Low level driver callbacks and hid probe function to register
QucikI2C as a HID driver, and external touch device as a HID device.
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
