In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The newly added file causes a ton of sparse warnings about the
incorrect use of __le32 and similar types:
drivers/hid/intel-ish-hid/ishtp/loader.h:41:23: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:42:27: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:43:24: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:44:24: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:45:22: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.c:172:33: warning: restricted __le32 degrades to integer
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: warning: incorrect type in assignment (different base types)
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: expected restricted __le32 [usertype] length
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: got unsigned long
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: warning: incorrect type in assignment (different base types)
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: expected restricted __le32 [usertype] fw_off
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: got unsigned int [usertype] offset
drivers/hid/intel-ish-hid/ishtp/loader.c:180:17: warning: cast from restricted __le32
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: warning: invalid assignment: +=
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: left side has type unsigned int
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: right side has type restricted __le32
Add the necessary conversions and use temporary variables where appropriate
to avoid converting back.
Fixes: 579a267e46 ("HID: intel-ish-hid: Implement loading firmware from host feature")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhang Lixu <lixu.zhang@intel.com>
Tested-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Fix the 'make W=1' kernel-doc warning:
drivers/hid/intel-ish-hid/ishtp/bus.c:853: warning: Function parameter or struct member 'dev' not described in 'ishtp_wait_resume'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311060843.dXENYlGc-lkp@intel.com/
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
kernel test robot reported build error due to a pointer type mismatch:
.../ishtp/loader.c:172:8: error: incompatible pointer types passing
'__le64 *' (aka 'unsigned long long *') to parameter of type
'dma_addr_t *' (aka 'unsigned int *')
The issue arises because the driver, which is primarily intended for
x86-64, is also built for i386 when COMPILE_TEST is enabled.
Resolve type mismatch by using a temporary dma_addr_t variable to hold
the DMA address. Populate this temporary variable in dma_alloc_coherent()
function, and then convert and store the address in the
fragment->fragment_tbl[i].ddr_adrs field in the correct format.
Similarly, convert the ddr_adrs field back to dma_addr_t when freeing
the DMA buffer with dma_free_coherent().
Fixes: 579a267e46 ("HID: intel-ish-hid: Implement loading firmware from host feature")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405201313.SAStVPrT-lkp@intel.com/
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Add a check for the return value of pci_alloc_irq_vectors() and return
error if it fails.
[jkosina@suse.com: reworded changelog based on Srinivas' suggestion]
Fixes: 74fbc7d371 ("HID: intel-ish-hid: add MSI interrupt support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch enhances the firmware reset handler in the Intel Integrated
Sensor Hub (ISH) driver. Previously, the ISH firmware would send a
MNG_RESET_NOTIFY message in response to an empty IPC message from the
ish_wakeup function. With the introduction of the feature to load ISH
firmware from the host on the LunarLake platform, the ISH bootloader
now involves the IPC function. This results in an additional
MNG_RESET_NOTIFY message being sent by ISH bootloader after power on.
Consequently, the driver receives two MNG_RESET_NOTIFY messages during
system boot up. This can disrupt the dev->dev_state during the first
reset flow due to the subsequent reset notify message.
To address this, the patch modifies the fw_reset_work_fn function to skip
the execution of ishtp_reset_compl_handler during the first reset flow if
a reset is pending. The ishtp_reset_compl_handler will then be executed
during the second reset flow, ensuring the dev->dev_state is not disrupted.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Starting from the Lunar Lake generation, the ISH firmware has been
divided into two components for better space optimization and increased
flexibility. These components include a bootloader that is integrated
into the BIOS, and a main firmware that is stored within the operating
system's file system.
Introduce support for loading ISH main firmware from host. This feature is
applicable for Lunar Lake and later generation.
Current intel-ishtp-loader, is designed for Chrome OS based systems which
uses core boot and has different firmware loading method. For non chrome
systems the ISH firmware loading uses different method.
Key differences include:
1. The new method utilizes ISHTP capability/fixed client to enumerate the
firmware loader function. It does not require a connection or flow control,
unlike the method used in Chrome OS, which is enumerated as an ISHTP
dynamic client driver, necessitating connect/disconnect operations and flow
control.
2. The new method employs a table to describe firmware fragments, which are
sent to ISH in a single operation. Conversely, the Chrome OS method sends
firmware fragments in multiple operations within a loop, sending only one
fragment at a time.
Additionally, address potential error scenarios to ensure graceful failure
handling.
- Firmware Not Found: Triggers if request_firmware() fails, leaving ISH in
a waiting state.
Recovery: Re-insmod the ISH drivers to retry.
- DMA Buffer Allocation Failure: Occurs during prepare_dma_bufs(), leading
to ISH waiting state. Allocated resources are released.
Recovery: Re-insmod the ISH drivers to retry.
- Incorrect Firmware Image: Causes ISH to refuse loading after three failed
attempts.
Recovery: A platform reset is required.
Please refer to the [Documentation](Documentation/hid/intel-ish-hid.rst)
for the details on flows.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Introduces a new structure, ishtp_driver_data, to hold driver-specific
data, including the firmware filename for different hardware variants of
the Intel Integrated Sensor Hub (ISH).
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use PCI_VDEVICE() to simplify the device table, and rename these IDs to
follow the pattern PCI_DEVICE_ID_INTEL_*;
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Zhang, Lixu <lixu.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The variable dev->devc in ish_dev_init was utilized by dev_err before it
was properly assigned. To rectify this, the assignment of dev->devc has
been moved to immediately follow memory allocation.
Without this change "(NULL device *)" is printed for device information.
Fixes: 8ae2f2b0a2 ("HID: intel-ish-hid: ipc: Fix potential use-after-free in work function")
Fixes: ae02e5d40d ("HID: intel-ish-hid: ipc layer")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add device ID of Arrow Lake-S into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
After legacy suspend/resume via ACPI S3, sensor read operation fails
with timeout. Also, it will cause delay in resume operation as there
will be retries on failure.
This is caused by commit f645a90e8f ("HID: intel-ish-hid:
ishtp-hid-client: use helper functions for connection"), which used
helper functions to simplify connect, reset and disconnect process.
Also avoid freeing and allocating client buffers again during reconnect
process.
But there is a case, when ISH firmware resets after ACPI S3 suspend,
ishtp bus driver frees client buffers. Since there is no realloc again
during reconnect, there are no client buffers available to send connection
requests to the firmware. Without successful connection to the firmware,
subsequent sensor reads will timeout.
To address this issue, ishtp bus driver does not free client buffers on
warm reset after S3 resume. Simply add the buffers from the read list
to free list of buffers.
Fixes: f645a90e8f ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Now that the driver core can properly handle constant struct bus_type,
move the ishtp_cl_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Since PCI core and ACPI core already handles PCI PME wake and GPE wake
when the device has wakeup capability, use device_init_wakeup() to let
them do the wakeup setting work.
Also add a shutdown callback which uses pci_prepare_to_sleep() to let
PCI and ACPI set OOB wakeup for S5.
Cc: Jian Hui Lee <jianhui.lee@canonical.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use helper functions ishtp_cl_establish_connection() and
ishtp_cl_destroy_connection() to establish and destroy connection
respectively. These functions are used during initialization, reset and
deinitialization flows.
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use helper functions ishtp_cl_establish_connection() and
ishtp_cl_destroy_connection() to establish and destroy connection
respectively. These functions are used during initialization, reset and
deinitialization flows.
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
For every ishtp client driver during initialization state, the flow is:
1 - Allocate an ISHTP client instance
2 - Reserve a host id and link the client instance
3 - Search a firmware client using UUID and get related
client information
4 - Bind firmware client id to the ISHTP client instance
5 - Set the state the ISHTP client instance to CONNECTING
6 - Send connect request to firmware
7 - Register event callback for messages from the firmware
During deinitizalization state, the flow is:
9 - Set the state the ISHTP client instance to ISHTP_CL_DISCONNECTING
10 - Issue disconnect request to firmware
11 - Unlike the client instance
12 - Flush message queue
13 - Free ISHTP client instance
Step 2-7 are identical to the steps of client driver initialization
and driver reset flow, but reallocation of the RX/TX ring buffers
can be avoided in reset flow.
Also for step 9-12, they are identical to the steps of client driver
failure handling after connect request, driver reset flow and
driver removing.
So, add two helper functions to simplify client driver code.
ishtp_cl_establish_connection()
ishtp_cl_destroy_connection()
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band)
service, which allows to wakup device when the system is in S5 (Soft-Off
state). This OOB service can be enabled/disabled from BIOS settings. When
enabled, the ISH device gets PME wake capability. To enable PME wakeup,
driver also needs to enable ACPI GPE bit.
On resume, BIOS will clear the wakeup bit. So driver need to re-enable it
in resume function to keep the next wakeup capability. But this BIOS
clearing of wakeup bit doesn't decrement internal OS GPE reference count,
so this reenabling on every resume will cause reference count to overflow.
So first disable and reenable ACPI GPE bit using acpi_disable_gpe().
Fixes: 2e23a70eda ("HID: intel-ish-hid: ipc: finish power flow for EHL OOB")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://lore.kernel.org/lkml/CAAd53p4=oLYiH2YbVSmrPNj1zpMcfp=Wxbasb5vhMXOWCArLCg@mail.gmail.com/T/
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add device ID of Arrow Lake-H into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
During warm reset device->fw_client is set to NULL. If a bus driver is
registered after this NULL setting and before new firmware clients are
enumerated by ISHTP, kernel panic will result in the function
ishtp_cl_bus_match(). This is because of reference to
device->fw_client->props.protocol_name.
ISH firmware after getting successfully loaded, sends a warm reset
notification to remove all clients from the bus and sets
device->fw_client to NULL. Until kernel v5.15, all enabled ISHTP kernel
module drivers were loaded right after any of the first ISHTP device was
registered, regardless of whether it was a matched or an unmatched
device. This resulted in all drivers getting registered much before the
warm reset notification from ISH.
Starting kernel v5.16, this issue got exposed after the change was
introduced to load only bus drivers for the respective matching devices.
In this scenario, cros_ec_ishtp device and cros_ec_ishtp driver are
registered after the warm reset device fw_client NULL setting.
cros_ec_ishtp driver_register() triggers the callback to
ishtp_cl_bus_match() to match ISHTP driver to the device and causes kernel
panic in guid_equal() when dereferencing fw_client NULL pointer to get
protocol_name.
Fixes: f155dfeaa4 ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4fd ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0fd ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58cb8 ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Cc: <stable@vger.kernel.org> # 5.16+
Signed-off-by: Tanu Malhotra <tanu.malhotra@intel.com>
Tested-by: Shaunak Saha <shaunak.saha@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-----BEGIN PGP SIGNATURE-----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=XVs0
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential out of bound write of zeroes in HID core with a
specially crafted uhid device (Lee Jones)
- fix potential use-after-free in work function in intel-ish-hid (Reka
Norman)
- selftests config fixes (Benjamin Tissoires)
- few device small fixes and support
* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
selftest: hid: fix hid_bpf not set in config
HID: uhid: Over-ride the default maximum data buffer value with our own
HID: core: Provide new max_buffer_size attribute to over-ride the default
When a reset notify IPC message is received, the ISR schedules a work
function and passes the ISHTP device to it via a global pointer
ishtp_dev. If ish_probe() fails, the devm-managed device resources
including ishtp_dev are freed, but the work is not cancelled, causing a
use-after-free when the work function tries to access ishtp_dev. Use
devm_work_autocancel() instead, so that the work is automatically
cancelled if probe fails.
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
Initial support of HID-BPF (Benjamin Tissoires)
The history is a little long for this series, as it was intended to be
sent for v6.2. However some last minute issues forced us to postpone it
to v6.3.
Conflicts:
* drivers/hid/i2c-hid/Kconfig:
commit bf7660dab3 ("HID: stop drivers from selecting CONFIG_HID")
conflicts with commit 2afac81dd1 ("HID: fix I2C_HID not selected
when I2C_HID_OF_ELAN is")
the resolution is simple enough: just drop the "default" and "select"
lines as the new commit from Arnd is doing
- constify hid_ll_driver (Thomas Weißschuh)
- map standard Battery System Charging to upower (José Expósito)
- couple of assorted fixes and new handling of HID usages (Jingyuan
Liang & Ronald Tschalär)
Since commit 52d2253469 ("HID: Make lowlevel driver structs const")
the lowlevel HID drivers are only exposed as const.
Take advantage of this to constify the underlying structure, too.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230130-hid-const-ll-driver-v1-5-3fc282b3b1d0@weissschuh.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the kcalloc may return NULL pointer,
it should be better to check the ishtp_dma_tx_map
before use in order to avoid NULL pointer dereference.
Fixes: 3703f53b99 ("HID: intel_ish-hid: ISH Transport layer")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The variable rb_count is being incremented but it
is never referenced, it is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add device ID of Meteor Lake P into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a timing issue captured during ishtp client sending stress tests.
It was observed during stress tests that ISH firmware is getting out of
ordered messages. This is a rare scenario as the current set of ISH client
drivers don't send much data to firmware. But this may not be the case
going forward.
When message size is bigger than IPC MTU, ishtp splits the message into
fragments and uses serialized async method to send message fragments.
The call stack:
ishtp_cl_send_msg_ipc->ipc_tx_callback(first fregment)->
ishtp_send_msg(with callback)->write_ipc_to_queue->
write_ipc_from_queue->callback->ipc_tx_callback(next fregment)......
When an ipc write complete interrupt is received, driver also calls
write_ipc_from_queue->ipc_tx_callback in ISR to start sending of next fragment.
Through ipc_tx_callback uses spin_lock to protect message splitting, as the
serialized sending method will call back to ipc_tx_callback again, so it doesn't
put sending under spin_lock, it causes driver cannot guarantee all fragments
be sent in order.
Considering this scenario:
ipc_tx_callback just finished a fragment splitting, and not call ishtp_send_msg
yet, there is a write complete interrupt happens, then ISR->write_ipc_from_queue
->ipc_tx_callback->ishtp_send_msg->write_ipc_to_queue......
Because ISR has higher exec priority than normal thread, this causes the new
fragment be sent out before previous fragment. This disordered message causes
invalid message to firmware.
The solution is, to send fragments synchronously:
Use ishtp_write_message writing fragments into tx queue directly one by one,
instead of ishtp_send_msg only writing one fragment with completion callback.
As no completion callback be used, so change ipc_tx_callback to ipc_tx_send.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The double `like' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/hid/intel-ish-hid/ishtp-hid-client.c
line: 331
* @device: Pointer to the the ishtp client device for which this message
changed to
* @device: Pointer to the ishtp client device for which this message
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add device IDs of Alder Lake N and Raptor Lake S into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Allocating memory with kmalloc and GPF_DMA32 is not allowed, the
allocator will ignore the attribute.
Instead, use dma_alloc_coherent() API as we allocate a small amount of
memory to transfer firmware fragment to the ISH.
On Arcada chromebook, after the patch the warning:
"Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xcc0 (GFP_KERNEL). Fix your code!"
is gone. The ISH firmware is loaded properly and we can interact with
the ISH:
> ectool --name cros_ish version
...
Build info: arcada_ish_v2.0.3661+3c1a1c1ae0 2022-02-08 05:37:47 @localhost
Tool version: v2.0.12300-900b03ec7f 2022-02-08 10:01:48 @localhost
Fixes: commit 91b228107d ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This function had kernel-doc that not used a hash to separate
the function name from the one line description.
The warning was found by running scripts/kernel-doc, which is
caused by using 'make W=1'.
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:271: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Specify that both TGL and ADL don't support DMA cache snooping.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes spurious wakeups from s0ix on Lenovo ThinkPad X1 Cargon Gen 9 on
lid close.
These wakeups are generated by interrupts from the ISH on changes to the
lid status.
By disabling the wake IRQ from the ISH we inhibit these spurious
wakeups while keeping the resume from LID open through the ACPI
interrupt.
Reports on the Lenovo forums indicate that Lenovo ThinkPad X1 Yoga Gen6
is also affected.
Fixes: ae02e5d40d ("HID: intel-ish-hid: ipc layer")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214855
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211130060117.3026-1-linux@weissschuh.net
A late addititon to the intel-ish-hid framework caused a build failure
with clang, and introduced an ABI to the module loader that stops working
if any driver ever needs to bind to more than one UUID:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:1067:4: error: initializer element is not a compile-time constant
Change the ishtp_device_id to have correct documentation and a driver_data
field like all the other ones, and change the drivers to use the ID table
as the primary identification in a way that works with all compilers
and avoids duplciating the identifiers.
Fixes: f155dfeaa4 ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4fd ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0fd ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58cb8 ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Fixes: cb1a2c6847 ("HID: intel-ish-hid: use constants for modaliases")
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[jkosina@suse.cz: fix ecl_ishtp_cl_driver.id initialization]
[jkosina@suse.cz: fix conflict with already fixed kerneldoc]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ISH IPC driver uses asynchronous workqueue to do resume now, but there is
a potential timing issue: when child devices resume before bus driver, it
will cause child devices resume failed and cannot be recovered until
reboot. The current implementation in this case do wait for IPC to resume
but fail to accommodate for a case when there is no ISH reboot and soft
resume is taking time. This issue is apparent on Tiger Lake platform with
5.11.13 kernel when doing suspend to idle then resume(s0ix) test. To
resolve this issue, we change ISHTP HID client to use asynchronous resume
callback too. In the asynchronous resume callback, it waits for the ISHTP
resume done event, and then notify ISHTP HID client link ready.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Different platforms have different DMA capability, on most of
platforms, DMA support cache snooping. But few platforms,
such as ElkhartLake (EHL), don't support cache snooping
which requires cache flush from driver.
So add a hardware level callback to let ishtp driver know if cache
flush is needed.
As most of platform support cache snooping, so driver will not
do cache flush by default, until platform implements this callback
and return true explicitly.
Acked-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
During ISH DMA enabling, some platforms (such as EHL) don't
support cache snooping, driver needs involve clflush_cache_range
API which isn't supported by all archs (such as ARM).
Considering ISH only exists on Intel platforms, add the dependence
in Kconfig to avoid build warnings or errors on other archs.
Acked-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp/bus.c: In function ‘ishtp_trace_callback’:
drivers/hid/intel-ish-hid/ishtp/bus.c:876:29: warning: return type might be a candidate for a format attribute [-Wsuggest-attribute=format]
876 | return cl_device->ishtp_dev->print_log;
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Daniel Drubin <daniel.drubin@intel.com>
Cc: linux-input@vger.kernel.org
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
And demote non-conformant header
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:46: warning: Enum value 'LOADER_CMD_XFER_QUERY' not described in enum 'ish_loader_commands'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:46: warning: Enum value 'LOADER_CMD_XFER_FRAGMENT' not described in enum 'ish_loader_commands'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:46: warning: Enum value 'LOADER_CMD_START' not described in enum 'ish_loader_commands'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:108: warning: Function parameter or member 'reserved' not described in 'loader_msg_hdr'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'data' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'max_size' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'size' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'error' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'received' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'wait_queue' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:233: warning: Function parameter or member 'loader_ishtp_cl' not described in 'ishtp_cl_data'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:233: warning: Function parameter or member 'cl_device' not described in 'ishtp_cl_data'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:233: warning: Function parameter or member 'response' not described in 'ishtp_cl_data'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:233: warning: Function parameter or member 'flag_retry' not described in 'ishtp_cl_data'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:233: warning: Function parameter or member 'retry_count' not described in 'ishtp_cl_data'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:252: warning: Function parameter or member 'client_data' not described in 'get_firmware_variant'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:252: warning: Function parameter or member 'filename' not described in 'get_firmware_variant'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:281: warning: Function parameter or member 'out_msg' not described in 'loader_cl_send'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:281: warning: Function parameter or member 'out_size' not described in 'loader_cl_send'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:281: warning: Function parameter or member 'in_msg' not described in 'loader_cl_send'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:281: warning: Function parameter or member 'in_size' not described in 'loader_cl_send'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:281: warning: expecting prototype for Send message from host to firmware(). Prototype was for loader_cl_send() instead
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:445: warning: Function parameter or member 'cl_device' not described in 'loader_cl_event_cb'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:445: warning: Excess function parameter 'device' description in 'loader_cl_event_cb'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:551: warning: expecting prototype for Loads ISH firmware using ishtp interface(). Prototype was for ish_fw_xfer_ishtp() instead
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:745: warning: expecting prototype for Start executing ISH main firmware(). Prototype was for ish_fw_start() instead
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:767: warning: expecting prototype for Loads ISH firmware from host(). Prototype was for load_fw_from_host() instead
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Rushikesh S Kadam <rushikesh.s.kadam@intel.com>
Cc: linux-input@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp-hid-client.c:36: warning: expecting prototype for report_bad_packets(). Prototype was for report_bad_packet() instead
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Daniel Drubin <daniel.drubin@intel.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/hid/intel-ish-hid/ishtp-hid.c:11:
drivers/hid/intel-ish-hid/ishtp-hid.c:263: warning: expecting prototype for ishtp_hid_probe(). Prototype was for ishtp_hid_remove() instead
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp/client.c:121: warning: Function parameter or member 'cl_device' not described in 'ishtp_cl_allocate'
drivers/hid/intel-ish-hid/ishtp/client.c:121: warning: Excess function parameter 'dev' description in 'ishtp_cl_allocate'
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp/bus.c:173: warning: Function parameter or member 'fw_client' not described in 'ishtp_get_fw_client_id'
drivers/hid/intel-ish-hid/ishtp/bus.c:845: warning: Function parameter or member 'device' not described in 'ishtp_device'
drivers/hid/intel-ish-hid/ishtp/bus.c:858: warning: Function parameter or member 'device' not described in 'ishtp_get_pci_device'
drivers/hid/intel-ish-hid/ishtp/bus.c:871: warning: Function parameter or member 'cl_device' not described in 'ishtp_trace_callback'
drivers/hid/intel-ish-hid/ishtp/bus.c:884: warning: Function parameter or member 'dev' not described in 'ish_hw_reset'
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: "Uwe Kleine-König" <uwe@kleine-koenig.org>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ipc/pci-ish.c: In function ‘ish_resume_handler’:
drivers/hid/intel-ish-hid/ipc/pci-ish.c:264:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Zhang Lixu <lixu.zhang@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Daniel Drubin <daniel.drubin@intel.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/hid/intel-ish-hid/ishtp-hid.c:11:
drivers/hid/intel-ish-hid/ishtp-hid.h:24:21: warning: ‘hid_ishtp_guid’ defined but not used [-Wunused-const-variable=]
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Daniel Drubin <daniel.drubin@intel.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp/client.c: In function ‘ishtp_cl_disconnect’:
drivers/hid/intel-ish-hid/ishtp/client.c:266:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The individual sensor drivers implemented in the ISH firmware needs
capability to take special actions when there is a change in the system
standby state. The ISH core firmware passes this notification to
individual sensor drivers in response to the OS request via connected
standby bit in the SYSTEM_STATE_STATUS command.
This change sets CONNECTED_STANDBY_STATE_BIT bit to 1 during suspend
callback and clears during resume callback.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog rewrite]
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct ishtp_cl_driver::remove() return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error value is a bad idea.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is only a single change in behavior: Now dev->driver isn't modified.
Assigning to this variable is in the domain of the driver core only. (And
it's done in __device_release_driver shortly after bus->remove() (i.e
ishtp_cl_device_remove() here) returns.)
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A remove callback is only ever called for a bound device. So there is no
need to check for device or driver being NULL.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added Tiger Lake H PCI device ID to the supported device list.
Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When OOB is disabled, FW will be power gated when system is in S3/S4/S5
which is the same behavior with legacy ISH FW.
When OOB is enabled, FW will always power on which is totally different
comparing to legacy ISH FW.
So NO_D3 flag is not enough to check FW's status after resume.
Here we can use IPC FW status register to check host link status.
If it is false, it means FW get reset after power gated, need go through
the whole initialization flow; If it is true, it means FW is alive, just
set host ready bit to let fw know host is up.
Co-developed-by: Wei Jiang <wei.w.jiang@intel.com>
Signed-off-by: Wei Jiang <wei.w.jiang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band)
service, which allows wakup device when the system is in S5 (Soft-Off
state). This OOB service can be enabled/disabled from BIOS settings. When
enabled, the ISH device gets PME wake capability. To enable PME wakeup,
driver also needs to enable ACPI GPE bit.
Once wakeup, BIOS will clear the wakeup bit to identify wakeup is
successful. So driver need to re-enable it in resume function to
keep the next wakeup capability.
Since this feature is only present on EHL, we use EHL PCI device id to
enable this feature.
Co-developed-by: Najumon Ba <najumon.ba@intel.com>
Signed-off-by: Najumon Ba <najumon.ba@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This assignment to rv is unused in an error path. So remove it.
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
PCI devices support two variants of the D3 power state: D3hot (main power
present) D3cold (main power removed). Previously struct pci_dev contained:
unsigned int d3_delay; /* D3->D0 transition time in ms */
unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
"d3_delay" refers specifically to the D3hot state. Rename it to
"d3hot_delay" to avoid ambiguity and align with the ACPI "_DSM for
Specifying Device Readiness Durations" in the PCI Firmware spec r3.2,
sec 4.6.9.
There is no change to the functionality.
Link: https://lore.kernel.org/r/20200730210848.1578826-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCI_DEV_FLAGS_NO_D3 should not be used outside of PCI core.
Instead, we can use pci_save_state() to hint PCI core that the device
should stay at D0 during suspend. By doing so, PCI core will let the
upstream bridges also stays at D0 so the entire hierarchy is in the
correct power state as PCI spec mandates.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Older compilers like gcc-4.8 don't see that the variable is
initialized when it is used:
In file included from include/linux/compiler_types.h:68:0,
from <command-line>:0:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c: In function 'load_fw_from_host':
include/linux/compiler-gcc.h:75:45: warning: 'fw_info.ldr_capability.max_dma_buf_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
^
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:770:22: note: 'fw_info.ldr_capability.max_dma_buf_size' was declared here
struct shim_fw_info fw_info;
^
Make sure to initialize it before returning an error from ish_query_loader_prop().
Fixes: 91b228107d ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added Tiger Lake PCI device ID to the supported device list.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add Comet Lake H into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
EHL is a new platform using ishtp solution, add its device id
to support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The NO_D3 flag would be set if the ISH enter D0i3 in ish_suspend(),
The resume paths can be distinguished by checking the NO_D3 flag.
It's more reasonable than checking the FW status.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For suspend-to-idle, send suspend message and set N0_D3 flag to put
the ISH into D0i3 state.
For suspend-to-mem, disable the DMA bit before ISH entering D3, and
NO_D3 flag is cleared by default, then the ISH would enter D3.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently, the NO_D3 flag is set in ish_probe(), and cleared in
ish_remove(). So even if the system goes into S3, ISH is still
in D0i3 state. It makes more sense that put ISH into D3 as system
goes into S3 and put ISH into D0i3 as system goes into suspend-to-idle.
I remove the NO_D3 setting in ish_probe(), so that ISH can enter
D3 state when system enters S3. Only set N0_D3 flag when system
enters the suspend-to-idle or platform specified, and clear it
when system resume.
When the ISH enters D3, the FW will check the DMA bit status.
If the DMA bit is set, the FW will reset automatically. So the
DMA bit need be clear before putting ISH into D3 state.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- fix for one corner case in HID++ protocol with respect to handling
very long reports, from Hans de Goede
- power management fix in Intel-ISH driver, from Hyungwoo Yang
- use-after-free fix in Intel-ISH driver, from Dan Carpenter
- a couple of new device IDs/quirks from Kai-Heng Feng, Kyle Godbey and
Oleksandr Natalenko
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: fix wrong driver_data usage
HID: multitouch: Add pointstick support for ALPS Touchpad
HID: logitech-dj: Fix forwarding of very long HID++ reports
HID: uclogic: Add support for Huion HS64 tablet
HID: chicony: add another quirk for PixArt mouse
HID: intel-ish-hid: Fix a use after free in load_fw_from_host()
Remove the NO_D3 flag when remove the driver and let device enter
into D3, it will save more power.
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently, in suspend() and resume(), ishtp client drivers are using
driver_data to get "struct ishtp_cl_device" object which is set by
bus driver. It's wrong since the driver_data should not be owned bus.
driver_data should be owned by the corresponding ishtp client driver.
Due to this, some ishtp client driver like cros_ec_ishtp which uses
its driver_data to transfer its data to its child doesn't work correctly.
So this patch removes setting driver_data in bus drier and instead of
using driver_data to get "struct ishtp_cl_device", since "struct device"
is embedded in "struct ishtp_cl_device", we introduce a helper function
that returns "struct ishtp_cl_device" from "struct device".
Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
