sysfb
- drm/sysfb truncation and alignment fixes.
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size.
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix.
ivpu:
- fix leak when error handling in ivpu.
-----BEGIN PGP SIGNATURE-----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=eLQl
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"These are just the fixes from our fixes branch, all pretty small and
scattered.
sysfb:
- drm/sysfb truncation and alignment fixes
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix
ivpu:
- fix leak when error handling in ivpu"
* tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel:
drm/sysfb: Avoid truncating maximum stride
drm/sysfb: Return errno code from drm_sysfb_get_visible_size()
drm/sysfb: Avoid possible truncation with calculating visible size
drm/sysfb: Do not page-align visible size of the framebuffer
drm/edid: fix OOB read in drm_parse_tiled_block()
drm/nouveau: fix reversed error cleanup order in ucopy functions
drm/nouveau/acr: fix missing nvkm_done() in error path of nvkm_acr_oneinit()
accel/amdxdna: Use caller client for debug BO sync
drm/displayid: fix Tiled Display Topology ID size
accel/ivpu: fix HWS command queue leak on registration failure
Passing a maximum as 64-bit type to drm_sysfb_get_validated_int0()
can truncate the value to 32 bits. Use drm_sysfb_get_validated_size0(),
which uses 64-bit arithmetics. Then test the returned stride against
the limits of int to avoid truncations in the returned value. A valid
stride is in the range of [1, INT_MAX] inclusive.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/dri-devel/20260617114016.5A5991F000E9@smtp.kernel.org/
Fixes: 32ae90c66f ("drm/sysfb: Add efidrm for EFI displays")
Fixes: a84eb6abe2 ("drm/sysfb: Add vesadrm for VESA displays")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260618084327.46567-5-tzimmermann@suse.de
Change the return type of drm_sysfb_get_visible_size() to s64 so
that it returns a possible errno code from _get_validated_size0().
Fix callers to handle the errno code.
The currently returned unsigned type converts an errno code to a
very large size value, which drivers interpret as visible size of
the system framebuffer. Later efforts to reserve the framebuffer
resource fail.
The bug has been present since efidrm and vesadrm got merged. It
was then part of each driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 32ae90c66f ("drm/sysfb: Add efidrm for EFI displays")
Fixes: a84eb6abe2 ("drm/sysfb: Add vesadrm for VESA displays")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Link: https://patch.msgid.link/20260618084327.46567-4-tzimmermann@suse.de
Calculating the visible size of the system framebuffer can result in
truncation of the result. The calculation uses 32-bit arithmetics,
which can overflow if the values for height and stride are large. Fix
the issue by multiplying with mul_u32_u32().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 32ae90c66f ("drm/sysfb: Add efidrm for EFI displays")
Fixes: a84eb6abe2 ("drm/sysfb: Add vesadrm for VESA displays")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/dri-devel/20260617114027.1F2A71F000E9@smtp.kernel.org/
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260618084327.46567-3-tzimmermann@suse.de
Only return the actually visible size of the system framebuffer in
drm_sysfb_get_visible_size_si(). Drivers use this size value for
reserving access to framebuffer memory. Increasing the value can
make later attempts to do so fail.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 32ae90c66f ("drm/sysfb: Add efidrm for EFI displays")
Fixes: a84eb6abe2 ("drm/sysfb: Add vesadrm for VESA displays")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Link: https://patch.msgid.link/20260618084327.46567-2-tzimmermann@suse.de
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
-----BEGIN PGP SIGNATURE-----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=kWIv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-05-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com
Set PM ops for the vesadrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-6-tzimmermann@suse.de
Set PM ops for the simpledrm driver. Suspend and resume the DRM
state on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-5-tzimmermann@suse.de
Set PM ops for the ofdrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-4-tzimmermann@suse.de
Set PM ops for the efidrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-3-tzimmermann@suse.de
Set PM ops for the corebootdrm driver. Suspend and resume the DRM
state on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-2-tzimmermann@suse.de
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
display_get_pci_dev_of() gets a referenced PCI device via
pci_get_device(). Drop that reference when pci_enable_device() fails and
release it during the managed teardown path after pci_disable_device().
Without that, ofdrm leaks the pci_dev reference on both the error path
and the normal cleanup path.
Fixes: c8a17756c4 ("drm/ofdrm: Add ofdrm for Open Firmware framebuffers")
Co-developed-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Co-developed-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260420002513.216-1-dbgh9129@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmnS4Y8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGe6AIAI4rjLLPlxUKQbx4
JP9lsKH7vqeIVvuMqzFau7+B8ngJ+80OESnBF7n43oNEqdJ0NYiL+rPtcGgBjZDP
yUu5DlzVSxpAIQBZe2Nc0dz/5NbT9QxKyC5Yl/whpNIR7UHx1RFvDJYxwN9xKxTw
ggLQevKAnHrKjIOKjq70Yqz2T1JMXc9Wp/xpur0oGioiFW/lH24CgHDXjE2Ka9oD
wqhotzThuSaaVDmqZ8WNFKxx2onR4r8/NpljaVT2mWRJ2+IMF4pMOBJZRQiNZtRa
1CsoJ3aV6pslAsuC1dLboCMul48VUgyu7l3xQwXVuA5bRO1jqt5ILWC10g09OItU
7CxGTno=
=1TRg
-----END PGP SIGNATURE-----
Merge v7.0-rc7 into drm-next
Thomas Zimmermann needs 2f42c1a616 ("drm/ast: dp501: Fix
initialization of SCU2C") for drm-misc-next.
Conflicts:
- drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c
Just between e927b36ae1 ("drm/amd/display: Fix NULL pointer
dereference in dcn401_init_hw()") and it's cherry-pick that confused
git.
- drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
Deleted in 6b0a611628 ("drm/amd/pm: Unify version check in SMUv11")
but some cherry-picks confused git. Same for v12/v14.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Fix incorrect error checking and memory type confusion in
efidrm_device_create(). devm_memremap() returns error pointers, not
NULL, and returns system memory while devm_ioremap() returns I/O memory.
The code incorrectly passes system memory to iosys_map_set_vaddr_iomem().
Restructure to handle each memory type separately. Use devm_ioremap*()
with ERR_PTR(-ENXIO) for WC/UC, and devm_memremap() with ERR_CAST() for
WT/WB.
Fixes: 32ae90c66f ("drm/sysfb: Add efidrm for EFI displays")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260311064652.2903449-1-nichen@iscas.ac.cn
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Add fields and constants for coreboot framebuffer orientation. Set
corebootdrm's DRM connector state from the values. Not all firmware
provides orientation, so make it optional. Systems without, continue
to use unknown orientation.
v3:
- comment on _HAS_ORIENTATION semantics (Tzung-Bi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> # coreboot
Link: https://patch.msgid.link/20260217155836.96267-13-tzimmermann@suse.de
Add corebootdrm, a DRM driver for coreboot framebuffers. The driver
supports a pre-initialized framebuffer with various packed RGB formats.
The driver code is fairly small and uses the same logic as the other
sysfb drivers. Most of the implementation comes from existing sysfb
helpers.
Until now, coreboot relied on simpledrm or simplefb for boot-up graphics
output. Initialize the platform device for corebootdrm in the same place
in framebuffer_probe(). With a later commit, the simple-framebuffer should
be removed.
v4:
- sort include statements (Tzung-Bi)
v3:
- comment on _HAS_LFB semantics (Tzung-Bi)
- fix typo in commit description (Tzung-Bi)
- comment on simple-framebuffer being obsolete for coreboot
v2:
- reimplement as platform driver
- limit resources and mappings to known framebuffer memory; no
page alignment
- create corebootdrm device from coreboot framebuffer code
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> # coreboot
Link: https://patch.msgid.link/20260217155836.96267-12-tzimmermann@suse.de
Provide drm_sysfb_get_format(), a helper that finds a specific DRM
format from a list of pixel formats. The new function builds upon
drm_sysfb_get_format_si(), which finds the DRM format from a given
instance of struct screen_info. Now get the screen_info's pixel format
in the caller. Allows for matching pixel formats in drivers without
screen_info.
Convert the callers in efidrm and vesadrm to the new interface.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Link: https://patch.msgid.link/20260217155836.96267-11-tzimmermann@suse.de
- Quirk the broken EFI framebuffer geometry on the Valve Steam Deck
- Capture the EDID information of the primary display also on non-x86
EFI systems when booting via the EFI stub.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaYoTAgAKCRAwbglWLn0t
XFe8AQDJe2GSNfzWgqoTqgT6tcH7lFG2SjdpIb+jHSmvgHckbAD/cUaY8YnhdYkm
nz6URLJN/2NHuaDq1mUL8CwJwIot4wk=
=41tn
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Quirk the broken EFI framebuffer geometry on the Valve Steam Deck
- Capture the EDID information of the primary display also on non-x86
EFI systems when booting via the EFI stub.
* tag 'efi-next-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Support EDID information
sysfb: Move edid_info into sysfb_primary_display
sysfb: Pass sysfb_primary_display to devices
sysfb: Replace screen_info with sysfb_primary_display
sysfb: Add struct sysfb_display_info
efi: sysfb_efi: Reduce number of references to global screen_info
efi: earlycon: Reduce number of references to global screen_info
efi: sysfb_efi: Fix efidrmfb and simpledrmfb on Valve Steam Deck
efi: sysfb_efi: Convert swap width and height quirk to a callback
efi: sysfb_efi: Fix lfb_linelength calculation when applying quirks
efi: sysfb_efi: Replace open coded swap with the macro
Move x86's edid_info into sysfb_primary_display as a new field named
edid. Adapt all users.
An instance of edid_info has only been defined on x86. With the move
into sysfb_primary_display, it becomes available on all architectures.
Therefore remove this contraint from CONFIG_FIRMWARE_EDID.
x86 fills the EDID data from boot_params.edid_info. DRM drivers pick
up the raw data and make it available to DRM clients. Replace the
drivers' references to edid_info and instead use the sysfb_display_info
as passed from sysfb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of screen_info, store a copy of sysfb_primary_display as
device data. Pick it up in drivers. Later changes will add additional
data to the display info, such as EDID information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
Retrieve the CRTC's new state with drm_atomic_get_new_crtc_state()
in drm_sysfb_plane_helper_begin_fb_access(). The blit function might
be incorrect otherwise.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: cb71de0925 ("drm/sysfb: Lookup blit function during atomic check")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: https://lore.kernel.org/dri-devel/aPJrs7_u8KcalNsC@intel.com/
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251020125227.41308-1-tzimmermann@suse.de
Make sure the headers are sorted alphabetically to ensure consistent
code.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Some configurations of sysfb outputs require format conversion from
framebuffer to scanout buffer. It is a driver bug if the conversion
helper is missing, yet it might happen on odd scanout formats. The old
code, based on drm_fb_blit(), only detects this situation during the
commit's hardware update, which is too late to abort the update.
Lookup the correct blit helper as part of the check phase. Then store
it in the sysfb plane state. Allows for detection of a missing helper
before the commit has started. Also avoids drm_fb_blit()'s large switch
statement on each updated scanline. Only a single lookup has to be done.
The lookup is in drm_sysfb_get_blit_func(), which only tracks formats
supported by sysfb drivers.
The lookup happens in sysfb's begin_fb_access helper instead of its
atomic_check helper. This allows vesadrm, and possibly other drivers,
to implement their own atomic_check without interfering with blit
lookups. Vesadrm implements XRGB8888 on top of R8 formats with the
help of the atomic_check. Doing the blit lookup in begin_fb_access then
always uses the correct CRTC format on all drivers.
v2:
- vesadrm: use drm_sysfb_plane_helper_begin_fb_access()
- fix type in commit description (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-3-tzimmermann@suse.de
The plane-state type struct drm_sysfb_plane_state will store the
helper for blitting to the scanout buffer.
v2:
- add variable for duplicated shadow-plane state (Javier)
- fix build error
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-2-tzimmermann@suse.de
The declaration of pointer crtc_state includes an assignment to
crtc_state. The double assignment of crtc_state is redundant and
can be removed.
Fixes: 061963cd9e ("drm/sysfb: Blit to CRTC destination format")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250903083106.2703580-1-colin.i.king@gmail.com
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250828085708.3383760-1-nichen@iscas.ac.cn
Add support for DRM_FORMAT_C8 to vesadrm. The new pixel-format
description PIXEL_FORMAT_C8 describes the layout. Vesadrm's helpers
vesadrm_fill_palette_lut() and vesadrm_load_palette_lut() set the
hardware palette according to the CRTC's output format.
The driver emulates XRGB8888 by converting the source buffer to
RGB332 and using the resulting 256 colors as index into the hardware
palette. The hardware palette converts back to RGB during scanout.
This has no overhead compared to other format conversion, but allows
common userspace, such as Wayland compositors, to operate on the
display.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-10-tzimmermann@suse.de
Distiguish between component-based formats and 'the rest' in vesadrm's
color management. Scanout buffers with component-based format allow
for gamma correction. Palette-based formats (i.e., 'the rest') require
palette setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-9-tzimmermann@suse.de
Rename vesadrm's gamma helpers in preparation of the upcoming support
for color palettes. Gamma correction and color palettes share the same
hardware features, but the driver's old naming only indicated support
for gamma LUTs.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-8-tzimmermann@suse.de
Use the color format stored in struct drm_sysfb_crtc_state for
color-format conversion instead of the scanout-buffer format
announced by firmware. Currently, both values are identical.
This will allow drivers to modify the CRTC's input format to a
certain extend. Specifically, vesadrm will be able to display RGB
framebuffers when the scanout buffer is of C8 format. With color-
format conversion to RGB332 and correct setup of the C8 palette,
displaying XRGB8888-based buffers under C8 can be achieved.
v2:
- refer to RGB332 as CRTC input format
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-5-tzimmermann@suse.de
Convert drm_sysfb_get_format_si() to lookup the screen_info color
format as struct pixel_format with screen_info_pixel_format(). Then
search the list of given formats for the screen_info format with
pixel_format_equal().
Replaces custom code with helpers. The pixel-compare helper
pixel_format_equal() also handles indexed color formats. Prepares
for sysfb drivers to support color palettes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-4-tzimmermann@suse.de
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250703183447.2073902-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
non-drm:
rust:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
mtd:
- driver for Intel GPU non-volatile storage
i2c
- designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support
-----BEGIN PGP SIGNATURE-----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=n9MO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
Only set PMI fields if the screen_info's Vesa PM segment has been
set. Vesa PMI is the power-management interface. It also provides
means to set the color palette. The interface is optional, so not
all VESA graphics cards support it. Print vesafb's warning [1] if
the hardware palette cannot be set at all.
If unsupported the field PrimaryPalette in struct vesadrm.pmi is
NULL, which results in a segmentation fault. Happens with qemu's
Cirrus emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 814d270b31 ("drm/sysfb: vesadrm: Add gamma correction")
Link: https://elixir.bootlin.com/linux/v6.15/source/drivers/video/fbdev/vesafb.c#L375 # 1
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250617140944.142392-1-tzimmermann@suse.de
Only sysfb drivers use drm_fb_build_fourcc_list(). Move the function
to sysfb helpers and rename it accordingly. Update drivers and tests.
v3:
- update naming in tests
v2:
- select DRM_SYSFB_HELPER (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250616083846.221396-4-tzimmermann@suse.de
Protect global edid_info behind CONFIG_FIRMWARE_EDID and remove
the config tests for CONFIG_X86. Makes edid_info available iff
its option has been enabled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/20250602075537.137759-3-tzimmermann@suse.de
Replace vesadrm's code for programming the hardware gamma LUT with
DRM helpers. Either load a provided gamma ramp or program a default.
Set the individual entries with a callback.
Each gamma value is given as 3 individual 16-bit values for red,
green and blue. The driver reduces them to 8 bit to make them fit
into hardware registers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250520094203.30545-6-tzimmermann@suse.de
Replace ofdrm's code for programming the hardware gamma LUT with
DRM helpers. Either load a provided gamma ramp or program a default.
Set the individual entries with a callback.
Each gamma value is given as 3 individual 16-bit values for red,
green and blue. The driver reduces them to 8 bit to make them fit
into hardware registers.
v2:
- fix coding style
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250520094203.30545-5-tzimmermann@suse.de
Share efidrm's and vesadrm's validation of struct screen_info in
shared helpers. Update the drivers.
Most validation helpers test individual values against limits and
can be shared as they are. For color formats, a common helper looks
up the correct DRM format info from a driver-provided list of color
formats.
These screen_info helpers are only available if CONFIG_SCREEN_INFO
has been selected, as done by efidrm and vesadrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250410083834.10810-4-tzimmermann@suse.de
Provide sysfb helpers for validating framebuffer integer values
against limits. Update drivers. If a driver did not specify a limit
for a certain value, use INT_MAX.
v2:
- declare module information near EOF (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250410083834.10810-3-tzimmermann@suse.de
Split drm_sysfb_helper.c into two source files. There's now one
source file for the mode-setting pipeline and one source file for
module meta data. Prepares for adding additional source code to
sysfb helpers.
v2:
- fix typo in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250410083834.10810-2-tzimmermann@suse.de
Clang warns (or errors with CONFIG_WERROR=y):
drivers/gpu/drm/sysfb/efidrm.c:353:11: error: variable 'screen_base' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
353 | else if (mem_flags & EFI_MEMORY_WB)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/sysfb/efidrm.c:356:7: note: uninitialized use occurs here
356 | if (!screen_base)
| ^~~~~~~~~~~
drivers/gpu/drm/sysfb/efidrm.c:353:7: note: remove the 'if' if its condition is always true
353 | else if (mem_flags & EFI_MEMORY_WB)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
354 | screen_base = devm_memremap(&pdev->dev, mem->start, resource_size(mem),
drivers/gpu/drm/sysfb/efidrm.c:261:27: note: initialize the variable 'screen_base' to silence this warning
261 | void __iomem *screen_base;
| ^
| = NULL
efidrm_get_mem_flags() can only return a mask that has at least one of
the tested values set so the else case is impossible but clang's static
analysis runs before inlining so it cannot know that.
Initialize screen_base to NULL and add a defensive error message in case
mem_flags were ever returned without one of the four valid values.
Fixes: 32ae90c66f ("drm/sysfb: Add efidrm for EFI displays")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250410-efidrm-avoid-uninit-screen_info-warning-v2-1-b79646f58c24@kernel.org
