UAPI Changes:
amdxdna:
- support per-BO memory-usage queries
docs:
- Improve UAPI documentation
panthor:
- extend timestamp query with flags
Core Changes:
edid:
- provide enum drm_output_color_format; mass-convert drivers
gem-dma:
- use drm_dev_dma_dev() for DMA mappings
- set VM_DONTDUMP on mmap
mipi-dbi:
- drop simple-display; mass-convert drivers
prime:
- use drm_dev_dma_dev() for DMA mappings
ttm:
- improve handling of gfp_retry_mayfail
Driver Changes:
amdgpu:
- use atomic_create_state for private_obj
amdxdna:
- refactor GEM implementation
- fixes
bridge:
- provide clear-and-put helper for reliable cleanup
- analogix_dp: Use DP helpers for link training
- lontium-lt8713sx: Fix 64-bit division and Kconfig
- samsung-dsim: Use clear-and-put
imagination:
- improve power-off sequence
- support context-reset notification from firmware
komeda:
- support Arm China Linlon D6 plus DT bindings
mediatek:
- use drm_dev_dma_dev() for DMA mappings
panel:
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
panthor:
- support various sources for timestamp queries
- fixes
omapdrm:
- use atomic_create_state for private_obj
rcar-du:
- fix suspend/resume wrt VSP interface
- fix leak of device_link
- clean up
sun4i:
- use drm_dev_dma_dev() for DMA mappings
tegra:
- use atomic_create_state for private_obj
xe:
- send 'none' recovery method for XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmnFTdMbFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyAAoJEGgNwR1TC3ojLroIAIXl6jA6VBER5JztfXb7
e0mjOTPDejI2q/WA/s7cUIYsKI26eFiTjWKJlrqtewgwhviNkv3oB9MwHIrMjreB
QP9KMMfwfKFUpP/cXDyqFyMMuXPcdZYft0i38Donjg/l6t5LrZs5nt3or8nbN0H3
4myXUHiCU0N/Zvi4NAKWacfUrEof5JwsxEuCD6USIPkyq8M4M938nmWAElmm6gQu
zl+916jQ9Y7WRyjF2H/2XgBPIEQdvQwlkSCeY4yRbDdHVFCpq2Pepiq8L3c1uoBw
KoCR/92oyM+Q1bbpKFVXGDMgY9xSEvdmqzr5aKqJKT7ouBEUPYxvTlb0jtV/NHqy
7Ak=
=Iwpj
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-03-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1:
UAPI Changes:
amdxdna:
- support per-BO memory-usage queries
docs:
- Improve UAPI documentation
panthor:
- extend timestamp query with flags
Core Changes:
edid:
- provide enum drm_output_color_format; mass-convert drivers
gem-dma:
- use drm_dev_dma_dev() for DMA mappings
- set VM_DONTDUMP on mmap
mipi-dbi:
- drop simple-display; mass-convert drivers
prime:
- use drm_dev_dma_dev() for DMA mappings
ttm:
- improve handling of gfp_retry_mayfail
Driver Changes:
amdgpu:
- use atomic_create_state for private_obj
amdxdna:
- refactor GEM implementation
- fixes
bridge:
- provide clear-and-put helper for reliable cleanup
- analogix_dp: Use DP helpers for link training
- lontium-lt8713sx: Fix 64-bit division and Kconfig
- samsung-dsim: Use clear-and-put
imagination:
- improve power-off sequence
- support context-reset notification from firmware
komeda:
- support Arm China Linlon D6 plus DT bindings
mediatek:
- use drm_dev_dma_dev() for DMA mappings
panel:
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
panthor:
- support various sources for timestamp queries
- fixes
omapdrm:
- use atomic_create_state for private_obj
rcar-du:
- fix suspend/resume wrt VSP interface
- fix leak of device_link
- clean up
sun4i:
- use drm_dev_dma_dev() for DMA mappings
tegra:
- use atomic_create_state for private_obj
xe:
- send 'none' recovery method for XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260326151812.GA76082@linux.fritz.box
Replace simple-display helpers with regular atomic helpers. Store the
pipeline elements in struct st7735r_device and initialize them as part
of probing the device. Use mipi-dbi's existing helpers and initializer
macros where possible.
Effectively open-codes the modesetting code in the initializer helpers
of mipi-dbi and simple-display. St7735r requires a custom helper for
CRTC enablement, and non-freeing cleanup of the pipeline.
v2:
- fix connector initialization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-15-tzimmermann@suse.de
Rename the driver's device variable according to DRM conventions. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-14-tzimmermann@suse.de
Rename the driver's device struct according to DRM conventions. Also
add a helper to upcast from struct drm_device. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-13-tzimmermann@suse.de
Replace simple-display helpers with regular atomic helpers. Store the
pipeline elements in struct st7586_device and initialize them as part
of probing the device. Use mipi-dbi's existing helpers and initializer
macros where possible.
Effectively open-codes the modesetting code in the initializer helpers
of mipi-dbi and simple-display. St7586 requires custom helpers for
various pipeline elements, and non-freeing cleanup of the pipeline.
v3:
- return early in st7586_plane_helper_atomic_update (David)
v2:
- fix connector initialization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Tested-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-12-tzimmermann@suse.de
Use drm_atomic_helper_commit_tail_rpm() as commit tail to update the
plane after enabling the CRTC. Then remove the plane-update code from
mipi_dbi_enable_flush() and inline the remaining backlight code where
necessary.
Mipi-dbi's current commit tail drm_atomic_helper_commit_tail() first
updates the plane and then enables the CRTC. But the CRTC enablement
includes power management that prevents the initial plane update from
working. Hence, each mipi-dbi driver includes a plane update in their
CRTC enablement; in the form of mipi_dbi_enable_flush() or custom code.
Using drm_atomic_helper_commit_tail_rpm() enables the CRTC before any
plane updates. Hence the additional plane update can be removed from
mipi_dbi_enable_flush() and a number of drivers.
This leaves backlight_enable() in the helper, which can now be inlined
into affected drivers. Drivers now enable the CRTC plus an optional
backlight and then automatically update the plane.
In the case of disabling the display, drm_atomic_helper_commit_tail_rpm()
only disables the CRTC without touching the plane at all. Mipi-dbi's
mipi_dbi_pipe_disable() already contains the necessary logic.
Removing the plane update from the CRTC enablement will also help with
converting mipi-dbi from simple-pipe helpers to regular atomic helpers.
v3:
- st7586: remove unused variable
v2:
- ili9225: remove unused variables (David)
- st7586: remove unused variables (David)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-2-tzimmermann@suse.de
Correctly set dbi->write_memory_bpw for the ST7586 driver. This driver
is for a monochrome display that has an unusual data format, so the
default value set in mipi_dbi_spi_init() is not correct simply because
this controller is non-standard.
Previously, we were using dbi->swap_bytes to make the same sort of
workaround, but it was removed in the same commit that added
dbi->write_memory_bpw, so we need to use the latter now to have the
correct behavior.
This fixes every 3 columns of pixels being swapped on the display. There
are 3 pixels per byte, so the byte swap caused this effect.
Fixes: df3fb27a74 ("drm/mipi-dbi: Make bits per word configurable for pixel transfers")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260228-drm-mipi-dbi-fix-st7586-byte-swap-v1-1-e78f6c24cd28@baylibre.com
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Add a new DRM/KMS driver for displays using the Sitronix ST7920
controller connected via the SPI bus. This provides a standard
framebuffer interface for these common monochrome LCDs.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20251215-st7920-v7-2-36771009ec01@gmail.com
Add support for ST7561/ST7571 connected to SPI bus.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://patch.msgid.link/20251215-st7571-split-v3-6-d5f3205c3138@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Split up the driver to make it possible to add support for hw interfaces
other than I2C.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://patch.msgid.link/20251215-st7571-split-v3-5-d5f3205c3138@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Create an interface independent layer for the probe function. This is to
make it possible to add support for other interfaces.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://patch.msgid.link/20251215-st7571-split-v3-4-d5f3205c3138@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Move all structures that will be common for all interfaces (SPI/I2C) to
a separate header file.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://patch.msgid.link/20251215-st7571-split-v3-3-d5f3205c3138@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Keep a copy of the device structure instead of referring to i2c_client.
This is a preparation step to separate the generic part from all i2c
stuff.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://patch.msgid.link/20251215-st7571-split-v3-2-d5f3205c3138@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Rename st7571_device.dev to st7571_device.drm in preparation to
introduce a 'struct device' member to this structure.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://patch.msgid.link/20251215-st7571-split-v3-1-d5f3205c3138@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
We cannot know where the write pointer is, always reset position to
(0,0) before clearing display.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250913-st7571-reset-v1-1-ae5f58acdf8d@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Add support for 2bit grayscale and use it for XRGB8888 when grayscale is
supported.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-6-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Depending on which display that is connected to the controller, an
"1" means either a black or a white pixel.
The supported formats (R1/R2/XRGB8888) expects the pixels
to map against (4bit):
00 => Black
01 => Dark Gray
10 => Light Gray
11 => White
If this is not what the display map against, make it possible to invert
the pixels.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-4-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The comment describes the pixel data format as stated in
the st7571 datasheet, which is not necessary the same
as for the connected display.
Instead, describe the expected pixel data format which is used for
R1/R2/XRGB8888.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-1-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The kernel test robot reported that sparse gives the following warnings:
make C=2 M=drivers/gpu/drm/sitronix/
CC [M] st7571-i2c.o
CHECK st7571-i2c.c
st7571-i2c.c:1027:26: warning: symbol 'st7567_config' was not declared. Should it be static?
st7571-i2c.c:1039:26: warning: symbol 'st7571_config' was not declared. Should it be static?
MODPOST Module.symvers
LD [M] st7571-i2c.ko
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507180503.nfyD9uRv-lkp@intel.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250718152534.729770-1-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The Sitronix ST7567 is a monochrome Dot Matrix LCD Controller that has SPI,
I2C and parallel interfaces. The st7571-i2c driver only has support for I2C
so displays using other transport interfaces are currently not supported.
The DRM_FORMAT_R1 pixel format and data commands are the same than what
is used by the ST7571 controller, so only is needed a different callback
that implements the expected initialization sequence for the ST7567 chip.
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250715110411.448343-6-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Other Sitronix display controllers might need a different parsing DT
logic, so lets add a .parse_dt callback to struct st7571_panel_data.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250715110411.448343-4-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The driver already uses the dev_err_probe() helper (that only prints error
messages for the -EPROBE_DEFER case) when fails to get any other resource.
Also do the same when it fails to obtain the reset GPIO.
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250715110411.448343-3-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
It seems the driver took some inspiration from ssd130x and some of the
functions (encoder callbacks) were not renamed to use a st7571_ prefix.
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250715110411.448343-2-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
This driver requires of_get_display_timing() from
CONFIG_VIDEOMODE_HELPERS but does not select it. If no other driver
selects it, there will be a failure from the linker if the driver is
built in or modpost if it is a module.
ERROR: modpost: "of_get_display_timing" [drivers/gpu/drm/sitronix/st7571-i2c.ko] undefined!
Select CONFIG_VIDEOMODE_HELPERS to resolve the build failure.
Fixes: 4b35f0f41e ("drm/st7571-i2c: add support for Sitronix ST7571 LCD controller")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250610-drm-st7571-i2c-select-videomode-helpers-v1-1-d30b50ff6e64@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
When moving the Sitronix DRM drivers and renaming their Kconfig symbols,
the old symbols were kept, aiming to provide a seamless migration path
when running "make olddefconfig" or "make oldconfig".
However, the old compatibility symbols are not visible. Hence unless
they are selected by another symbol (which they are not), they can never
be enabled, and no backwards compatibility is provided.
Drop the broken mechanism and the old symbols.
Fixes: 9b8f32002c ("drm/sitronix: move tiny Sitronix drivers to their own subdir")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20395b14effe5e2e05a4f0856fdcda51c410329d.1747751592.git.geert+renesas@glider.be
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
We start to have support many Sitronix displays in the tiny directory,
and we expect more to come.
Move them to their own subdirectory.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250512-sitronix-v3-1-bbf6cc413698@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
