Add a driver for panels using the Novatek NT36536 Display Driver IC,
including support for the CSOT PP8807HB1-1, a dual-link 10-bit panel
found in LENOVO Legion Y700 Gen4.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260709142846.12463-3-mitltlatltl@gmail.com
Add a DRM panel driver for the DLC DLC0697 1080x1920@60Hz MIPI DSI
panel based on the Ilitek ILI7807S display controller.
The panel operates in video burst mode with four data lanes using
RGB888 pixel format.
Signed-off-by: Arpit Saini <arpit.saini@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260701-ili7807s-v4-2-c7d76d4780a5@oss.qualcomm.com
Add support for Ilitek ILI9488 DSI controller which is used in
FocusLCDs E35GH-I-MW800-CB 320x480 MIPI DSI panel. The mode timing
was adjusted after STM32MP157 testing. The previous 14.256 MHz mode
worked on AM62P, but was awkward for STM32 DSI/LTDC clock synthesis.
Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260617143245.372182-3-igor@reznichenko.net
This adds support for the ICNA3512 and ICNA3520 DDICs used in both the
AYN Odin 2 Portal and Ayaneo Pocket DS top panel respectively and for
for both the AYN Odin 3 and the AYN Thor top panel respectively.
These all have unique compatibles because the panels themselves are
likely unique hardware with only the ddic's and thus api and driver
handling shared.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260607-icna35xx-v4-2-64de514add34@gmail.com
The panel used by Anbernic in the RG Vita-Pro is a DSI panel based
on the TD4310 controller IC. It measures approximately 5.5 inches
diagonally and is 1080x1920 in resolution.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260610144407.438846-5-macroalpha82@gmail.com
This is used by the AYN Thor for the bottom panel.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260426-ch13726a-v7-2-554247c569e5@gmail.com
Add driver for Samsung S6E8FC0 DSI controller for M1906F9 video mode panel,
found in Xiaomi Mi A3 mobile phone.
Co-developed-by: Kamil Gołda <kamil.golda@protonmail.com>
Signed-off-by: Kamil Gołda <kamil.golda@protonmail.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yedaya Katsman <yedaya.ka@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260320-panel-patches-v7-2-3eaefc4b3878@gmail.com
Add support for the Rocktech RK050HR345-CT106A panel based on the
Ilitek ILI9806E controller using the SPI bus.
The driver is designed to be easily extensible to support other panels
with different initialization sequences and display timings by
providing a specific descriptor structure for each model.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-5-dario.binacchi@amarulasolutions.com
Split the driver to support multiple transport buses. The core logic
(power, GPIO, backlight) is moved to a dedicated core module, while
DSI-specific code is restricted to the DSI module.
Introduce DRM_PANEL_ILITEK_ILI9806E_CORE as a hidden Kconfig symbol
selected by the bus-specific configuration.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-3-dario.binacchi@amarulasolutions.com
The Ilitek ILI9806E controller can support different transport buses,
such as MIPI-DSI and SPI. The current implementation is specific to
the MIPI-DSI interface.
In preparation for adding SPI support, rename the current Kconfig
symbol and files to be DSI-specific, clarifying the current scope
of the code.
Since DRM_PANEL_ILITEK_ILI9806E is not used in any in-tree defconfig,
the symbol is renamed directly to DRM_PANEL_ILITEK_ILI9806E_DSI without
providing a legacy compatibility alias.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-2-dario.binacchi@amarulasolutions.com
Add a driver for panels using the Himax HX83121A Display Driver IC,
including support for the BOE/CSOT PPC357DB1-4, found in HUAWEI
Matebook E Go series (Gaokun2/3).
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260316084040.728106-3-mitltlatltl@gmail.com
Add support for the DSI LCD panel module found in Motorola Atrix 4G or
Droid X2 smartphones. Exact panel vendor and model are unknown hence panel
uses generic compatible based on board where it is used. The panel has a
540x960 resolution with 24 bit RGB per pixel.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260223064630.12720-3-clamor95@gmail.com
The LXD M9189A panel is based on the EK79007AD3 DSI display controller.
It currently supports only 4 lane operation.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260218-drm-panel-ek79007ad3-v4-3-8ec448bf3ede@pengutronix.de
LTL106HL02 is a color active matrix TFT (Thin Film Transistor) liquid
crystal display (LCD) that uses amorphous silicon TFT as switching
devices. This model is composed of a TFT LCD panel, a driver circuit and a
backlight unit. The resolution of a 10.6" contains 1920 x 1080 pixels and
can display up to 16,8M color with wide viewing angle.
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-8-clamor95@gmail.com
The LD070WX3 is a Color Active Matrix Liquid Crystal Display with an
integral Light Emitting Diode (LED) backlight system. The matrix employs
a-Si Thin Film Transistor as the active element. It is a transmissive type
display operating in the normally Black mode. This TFT-LCD has 7.0 inches
diagonally measured active display area with WXGA resolution (800 by 1280
pixel array).
LG LD070WX3-SL01 MIPI DSI panel was treated as simple DSI panel when it is
actually not and requires proper setup for correct work. Simple panel work
relied on preliminary configuration done by bootloader.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-3-clamor95@gmail.com
Synaptics TDDI (Touch/Display Integration) panels utilize a single chip
for display and touch controllers. Implement a simple device driver for
such panels, along with its built-in LED backlight controller, and add
support for TD4101 and TD4300 panels in the driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251009-panel-synaptics-tddi-v5-2-59390997644e@disroot.org
Add panel driver used in the OnePlus 6T.
No datasheet, based mostly on EDK2 init sequence and the downstream driver.
Note: This driver doesn't use previously mentioned "samsung,s6e3fc2x01"
by OnePlus 6T device-tree.
The reason is because DDIC itself without knowing the panel type used
with it will not give the driver enough information about the panel used,
as the panel cannot be autodetected.
While would be more practical to support the original compatible,
I would like to avoid it, to prevent confusing devs upstreaming DDICs.
Based on work of:
Casey Connolly <casey@connolly.tech>
Joel Selvaraj <foss@joelselvaraj.com>
Nia Espera <a5b6@riseup.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Jessica Zhang <jesszhan0024@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251023-s6e3fc2x01-v5-2-8f8852e67417@ixit.cz
This panel requires dual-channel mode. The device accepts video-mode data
on 8 lanes and will therefore need a dual-channel DSI controller. The two
interfaces that make up this device need to be instantiated in the
controllers that gang up to provide the dual-channel DSI host.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250919153839.236241-3-clamor95@gmail.com
HV101HD1-1E1 is a color active matrix TFT LCD module using amorphous
silicon TFT's (Thin Film Transistors) as an active switching devices. This
module has a 10.1 inch diagonally measured active area with HD resolutions
(1366 horizontal by 768 vertical pixel array).
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250717135752.55958-3-clamor95@gmail.com
Samsung AMS561RA01 is an AMOLED panel, using the Samsung S6E8AA5X01 MIPI
DSI controller. Implement a basic panel driver for such panels.
The driver also initializes a backlight device, which works by changing
the panel's gamma values and aid brightness levels appropriately, with
the help of look-up tables acquired from downstream kernel sources.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250721-panel-samsung-s6e8aa5x01-v5-2-1a315aba530b@disroot.org
Add support for the 2160x1080 LCD panel from DJN (98-03057-6598B-I)
bundled with a HX83112B driver IC, as found on the Fairphone 3
smartphone.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250611-fp3-display-v4-3-ef67701e7687@lucaweiss.eu
This initial part of the panel driver was mostly generated by the
"linux-mdss-dsi-panel-driver-generator" tool [1], reading downstream
Android kernel file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [2].
On top of the generic output of the tool, there were a couple of changes
applied:
- Added mipi_dsi_dcs_set_display_on() to function s6e88a0_ams427ap24_on(),
otherwise the display does not show up.
- In functions s6e88a0_ams427ap24_on() and s6e88a0_ams427ap24_off()
changed DSI commands to multi context and used "accum_err" returns.
- In functions s6e88a0_ams427ap24_on() and s6e88a0_ams427ap24_off() replaced
msleep() by mipi_dsi_msleep().
- The function s6e88a0_ams427ap24_get_modes() was changed to make use of
drm_connector_helper_get_modes_fixed(). This also required to include
drm/drm_probe_helper.h.
- In function s6e88a0_ams427ap24_probe() registring the regulators was changed
to devm_regulator_bulk_get_const(). This required to change supplies in struct
s6e88a0_ams427ap24 to a pointer.
- Removed bool "prepared" from struct s6e88a0_ams427ap24 and according parts in
functions s6e88a0_ams427ap24_prepare() and s6e88a0_ams427ap24_unprepare().
- Removed include <linux/of.h>, it's not needed.
- Added comments to the mipi_dsi_dcs_write_seq_multi() lines in function
s6e88a0_ams427ap24_on().
[1] https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator
[2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/d92ef0036b66520bb6d1ec908165e776cf30c303.1730070570.git.jahau@rocketmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/d92ef0036b66520bb6d1ec908165e776cf30c303.1730070570.git.jahau@rocketmail.com
LG SW43408 is 1080x2160@60Hz, 4-lane MIPI-DSI panel, used in some
Google Pixel-3 phones.
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[vinod: Add DSC support]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[caleb: cleanup and support turning off the panel]
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
[DB: partially rewrote the driver and fixed DSC programming]
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408-lg-sw43408-panel-v5-4-4e092da22991@linaro.org
Add support for the 2340x1080 LCD panel (DJN 9A-3R063-1102B) bundled
with a HX83112A driver IC, as found on the Fairphone 4 smartphone.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240216-fp4-panel-v3-2-a556e4b79640@fairphone.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
