Prefer bus format set via legacy "interface-pix-fmt" DT property
over panel bus format. This is necessary to retain support for
DTs which configure the IPUv3 parallel output as 24bit DPI, but
connect 18bit DPI panels to it with hardware swizzling.
This used to work up to Linux 6.12, but stopped working in 6.13,
reinstate the behavior to support old DTs.
Cc: stable@vger.kernel.org
Fixes: 5f6e56d331 ("drm/imx: parallel-display: switch to drm_panel_bridge")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20260110171510.692666-1-marex@nabladev.com
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Return the value of devm_drm_bridge_add() in order to propagate the
error properly, if it fails due to resource allocation failure or bridge
registration failure.
This ensures that the probe function fails safely rather than proceeding
with a potentially incomplete bridge setup.
Fixes: bf7e97910b ("drm/imx: parallel-display: add the bridge before attaching it")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260204090629.2209542-1-nichen@iscas.ac.cn
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmkaT2IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGnakIAIq6O35+abAlDGe7
n8IwX/4hwDJ9Ol2vddg6jTdio3szSlvcXRAyijkG35etLap+i+Q78Q9H1fRcQ8CF
5t9kfs5oCVWEDlsHMI+Q38vYB3tWikaIUIuao6pH5U50fsA0KM/287TLYdzvmBsK
gy0BHoZhl++xdMsD2HNwt08RrK/IyY+Zp9i7pKhcsxJiJCgy8nq5ZxhmRPbqTKNc
IqIBPzG+UYcOd88Iz377Ax+TnzWaTpwyvfaiU8DVFMN0FeENdk1FY8ClYfpYxCDH
Pm5NzL/f54VtdZ3aL1fKmYwWN7WFJT4FH3l6DOvtCc+Gx3KW1a3Y508CbqYBXvgY
QV4oH4Y=
=iSoY
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc6' into drm-next
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is the new API for allocating DRM bridges.
This conversion was missed during the initial conversion of all bridges to
the new API. Thus all kernels with commit 94d50c1a2c ("drm/bridge:
get/put the bridge reference in drm_bridge_attach/detach()") and using this
driver now warn due to drm_bridge_attach() incrementing the refcount, which
is not initialized without using devm_drm_bridge_alloc() for allocation.
To make the conversion simple and straightforward without messing up with
the drmm_simple_encoder_alloc(), move the struct drm_bridge from struct
imx_parallel_display_encoder to struct imx_parallel_display.
Also remove the 'struct imx_parallel_display *pd' from struct
imx_parallel_display_encoder, not needed anymore.
Fixes: 94d50c1a2c ("drm/bridge: get/put the bridge reference in drm_bridge_attach/detach()")
Reported-by: Ernest Van Hoecke <ernestvanhoecke@gmail.com>
Closes: https://lore.kernel.org/all/hlf4wdopapxnh4rekl5s3kvoi6egaga3lrjfbx6r223ar3txri@3ik53xw5idyh/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Link: https://patch.msgid.link/20251014-drm-bridge-alloc-imx-ipuv3-v1-1-a1bb1dcbff50@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The driver has never supported anything but OF probe so drop the unused
platform module alias incorrectly added by commit b2da05ff47
("imx-drm: parallel-display: Add MODULE_ALIAS()")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250924092643.26113-5-johan@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The bridge returned by drm_bridge_get_next_bridge() is refcounted. Put it
when done. We need to ensure it is not put before either next_bridge or
next_bridge_state is in use, thus for simplicity use a cleanup action.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250801-drm-bridge-alloc-getput-drm_bridge_get_next_bridge-v2-9-888912b0be13@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the imx_legacy bridge driver instead of handlign display modes via
the connector node.
All existing usecases already support attaching using
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, while the imx_legacy bridge
doesn't support creating connector at all. Switch to
drm_bridge_connector at the same time.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-11-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Defer panel handling to drm_panel_bridge, unifying codepaths for the
panel and bridge cases.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-8-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
None of the in-kernel DT files ever used edid override with the
fsl-imx-drm driver. In case the EDID needs to be specified manually, DRM
core allows one to either override it via the debugfs or to load it via
request_firmware by using DRM_LOAD_EDID_FIRMWARE. In all other cases
EDID and/or modes are to be provided as a part of the panel driver.
Drop support for the edid property.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-4-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the ipuv3 imx drivers from always returning zero in
the remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-23-u.kleine-koenig@pengutronix.de
