When using MMIO with regmap, fast_io is implied. No need to set it
again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260705163536.1850-6-wsa+renesas@sang-engineering.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Make sure to drop the i2c adapter device and module references before
returning when detecting a malformed devicetree during probe.
Fixes: 80e2f97968 ("drm: bridge: dw-hdmi: Switch to regmap for register access")
Cc: stable@vger.kernel.org # 4.12
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260717090819.1630965-1-johan@kernel.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The drm_bridge_funcs.atomic_reset callback and its
drm_atomic_helper_bridge_reset() helper are deprecated.
Switch to the atomic_create_state callback and its
drm_atomic_helper_bridge_create_state() counterpart.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-37-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_bridge_funcs.atomic_reset callback and its
drm_atomic_helper_bridge_reset() helper are deprecated.
Switch to the atomic_create_state callback and its
drm_atomic_helper_bridge_create_state() counterpart.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-36-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_bridge_funcs.atomic_reset callback and its
drm_atomic_helper_bridge_reset() helper are deprecated.
Switch to the atomic_create_state callback and its
drm_atomic_helper_bridge_create_state() counterpart.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-35-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_bridge_funcs.atomic_reset callback and its
drm_atomic_helper_bridge_reset() helper are deprecated.
Switch to the atomic_create_state callback and its
drm_atomic_helper_bridge_create_state() counterpart.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-34-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_bridge_funcs.atomic_reset callback and its
drm_atomic_helper_bridge_reset() helper are deprecated.
Switch to the atomic_create_state callback and its
drm_atomic_helper_bridge_create_state() counterpart.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-33-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Make use of the common drm_bridge_funcs.atomic_get_output_bus_fmts
helper for HDMI bridge connectors.
This allows dw-hdmi-qp HDMI bridges to participate in recursive bus
format selection in a meaningful way.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-15-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
The DisplayPort AUX channel gets initialized and registered during
dw_dp_bind(), but it is never unregistered, which may lead to resource
leaks and/or use-after-free.
Add the missing dw_dp_unbind() function to allow the users of the
library to handle the required cleanup, i.e. unregister the AUX adapter.
Fixes: 86eecc3a9c ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601-drm-rk-fixes-v4-1-c3f3f123e1da@collabora.com
Replace the driver local HDMI14_MAX_TMDSCLK define with the shared
constant defined in the <linux/hdmi.h> header.
The local define incorrectly referenced HDMI 1.4, but the 340 MHz
maximum TMDS character rate was actually introduced in HDMI 1.3.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-4-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Replace the driver local HDMI14_MAX_TMDSCLK define with the shared
constant defined in the <linux/hdmi.h> header.
The local define incorrectly referenced HDMI 1.4, but the 340 MHz
maximum TMDS character rate was actually introduced in HDMI 1.3.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-3-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmnmEIAACgkQ/lWMcqZw
E8PHNQ//fkMfZZwH9YjGZHUQKEiGk0Gw5GEheKogdYYm7tYMI+ljDC5gORfljuoa
/un9meYTjYOPUprxWvAHLTvkX9ZwGpoJKrM5yswY+GyD0a2fE9Y41nDfAXsOPnCM
jhRaM3va4Hr6Fdy9Fl/u7um4gRouGJYaENaa3c4TDRfyue0T0jMldxoIqTQzodRd
mRFs9wRdfw7Lq8HcSsTMBa2sbt+jma1FM+3jIBha9s+3blPYT7+zuhI5I6tmcUnL
bPOniB3+pxEcxZ7o+gK9xvhaP/b3POCL7ptfx+U4tULHh7yS65bi0BUAuLQwP7rJ
jh4fnXF+s22lZzj8s+x5uwr4+jYYxlUc2l9IENkjAEBUehftkeqdIVJAS5Nig7QE
zo9L87bECUXgDcgRHHt/CnYDaW9VF1IC+BoE2EidFA5wDeGfYkemrV4zt3jQD9Wx
9j/13M+uInB7vkVAMXuuKhGobO+ccM5S1GMhfwfQG08u71s1fqWG2Fr4H9OmhoAM
+8JipSR2EcEx6h/42aegch5YTzPNnZZMYbvrjr1QYU+iAJ0deniV96MqtksCb8vM
/XN2CToqf5eusRFPjgneVCU4aouHnH0bxmqI8Leqfh7TOaiROZHLnJvdv3NTsdTb
y0dKlP4k09dqLkcKfY3NKO0bWs1kGXjETp1XYgWUPM/M8pTJ0Rg=
=T0tH
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-04-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
atomic:
- raise the vblank timeout to avoid it on virtual drivers
- fix colorop duplication
bridge:
- stm_lvds: state check fix
- dw-mipi-dsi: bridge reference leak fix
panel:
- visionx-rm69299: init fix
dma-fence:
- fix sparse warning
dma-buf:
- UAF fix
panthor:
- mapping fix
arcgpu:
- device_node reference leak fix
nouveau:
- memory leak in error path fix
- overflow in reloc path for old hw fix
hv:
- Kconfig fix
v3d:
- infinite loop fix
-----BEGIN PGP SIGNATURE-----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=WXJa
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"These are the regular fixes that have built up over last couple of
weeks, all pretty minor and spread all over.
atomic:
- raise the vblank timeout to avoid it on virtual drivers
- fix colorop duplication
bridge:
- stm_lvds: state check fix
- dw-mipi-dsi: bridge reference leak fix
panel:
- visionx-rm69299: init fix
dma-fence:
- fix sparse warning
dma-buf:
- UAF fix
panthor:
- mapping fix
arcgpu:
- device_node reference leak fix
nouveau:
- memory leak in error path fix
- overflow in reloc path for old hw fix
hv:
- Kconfig fix
v3d:
- infinite loop fix"
* tag 'drm-fixes-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
MAINTAINERS: split hisilicon maintenance and add Yongbang Shi for hibmc-drm matainers
drm/v3d: Reject empty multisync extension to prevent infinite loop
drm/panel: visionox-rm69299: Make use of prepare_prev_first
drm/drm_atomic: duplicate colorop states if plane color pipeline in use
drm/nouveau: fix nvkm_device leak on aperture removal failure
hv: Select CONFIG_SYSFB only for CONFIG_HYPERV_VMBUS
dma-fence: Silence sparse warning in dma_fence_describe
drm/bridge: dw-mipi-dsi: Fix bridge leak when host attach fails
drm/arcpgu: fix device node leak
drm/panthor: Fix outdated function documentation
drm/panthor: Extend VM locked region for remap case to be a superset
dma-buf: fix UAF in dma_buf_put() tracepoint
drm/bridge: stm_lvds: Do not fail atomic_check on disabled connector
drm/atomic: Increase timeout in drm_atomic_helper_wait_for_vblanks()
This driver looks up the next_bridge at probe time and stores it in
hdmi->bridge.next_bridge, but only uses the stored value when attaching,
and only in the DRM_BRIDGE_ATTACH_NO_CONNECTOR case.
This will be problematic with an upcoming change, adding an hdmi-connector
using a device tree overlay when not present. That change is in turn
necessary to migrate the i.MX LCDIF driver to the bridge-connector.
The problem is that, adding the hdmi-connector via an overlay, devlink
considers hdmi-connector a consumer of the dw-hdmi device, generating a
chicken-egg problem:
* hdmi-connector probe won't be tried until dw-hdmi is probed (devlink)
* dw-hdmi probe will defer until it finds the next_bridge (the
hdmi-connector wrapper bridge)
In preparation for those changes, move the next_bridge lookup from probe to
attach, when it is actually used. This allows dw-hdmi to probe, so that the
hdmi-connector can probe as well.
Also avoid storing the pointer in hdmi->bridge.next_bridge: the value is
computed when needed, thus a local variable is enough.
Finally, this also allows to slightly improve the code by not doing any DT
lookup in the !DRM_BRIDGE_ATTACH_NO_CONNECTOR case.
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Damon Ding <damon.ding@rock-chips.com> # rk3399
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-7-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
dw-hdmi can operate in two different modes, depending on the platform data
as set by the driver:
A. hdmi->plat_data->output_port = 0:
the HDMI output (port@1) in device tree is not used
B. hdmi->plat_data->output_port = 1:
the HDMI output (port@1) is parsed to find the next bridge
Only case B is supported when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is
passed to the attach callback. Emit a warning when this is violated. Also
return -EINVAL which would be returned by drm_bridge_attach() right after
anyway.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL
Tested-by: Damon Ding <damon.ding@rock-chips.com> # rk3399
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-6-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
dw_mipi_dsi_host_attach() and dw_mipi_dsi2_host_attach() call
drm_bridge_add() before pdata->host_ops->attach(). If attach fails,
the bridge stayed registered without drm_bridge_remove(), leaking the
bridge reference and leaving the device on the global bridge list.
Fixes: 90910a6511 ("drm/bridge/synopsys: dsi: add ability to have glue-specific attach and detach")
Fixes: 0d6d86253f ("drm/bridge/synopsys: Add MIPI DSI2 host controller bridge")
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260403145208.15890-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The bridge gets allocated and initialized implicitly via the
devm_drm_bridge_alloc() helper in dw_dp_bind(). However, this is
preceded by an explicit allocation for the same dw_dp struct, which is
never used anywhere as the return from devm_kzalloc() gets immediately
overwritten by the aforementioned helper.
Get rid of the unnecessary and confusing memory allocation.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-8-645ecfb43f49@collabora.com
Now that we introduced a new drm_output_color_format enum to represent
what DRM_COLOR_FORMAT_* bits were representing, we can switch to the new
enum.
The main difference is that while DRM_COLOR_FORMAT_ was a bitmask,
drm_output_color_format is a proper enum. However, the enum was done is
such a way than DRM_COLOR_FORMAT_X = BIT(DRM_OUTPUT_COLOR_FORMAT_X) so
the transitition is easier.
The only thing we need to consider is if the original code meant to use
that value as a bitmask, in which case we do need to keep the bit shift,
or as a discriminant in which case we don't.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-9-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Now that we introduced a new drm_output_color_format enum to represent
what DRM_COLOR_FORMAT_* bits were representing, we can switch to the new
enum.
The main difference is that while DRM_COLOR_FORMAT_ was a bitmask,
drm_output_color_format is a proper enum. However, the enum was done is
such a way than DRM_COLOR_FORMAT_X = BIT(DRM_OUTPUT_COLOR_FORMAT_X) so
the transitition is easier.
The only thing we need to consider is if the original code meant to use
that value as a bitmask, in which case we do need to keep the bit shift,
or as a discriminant in which case we don't.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-8-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Channel Allocation (PB4) and Level Shift Information (PB5) are
configured with values from PB1 and PB2 due to the wrong offset
being used. This results in missing audio channels or incorrect
speaker placement when playing multi-channel audio.
Use the correct offset to fix multi-channel audio output.
Fixes: fd0141d1a8 ("drm/bridge: synopsys: Add audio support for dw-hdmi-qp")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260228112822.4056354-1-christianshewitt@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
UAPI Changes:
connector:
- Add panel_type property
fourcc:
- Add ARM interleaved 64k modifier
nouveau:
- Query Z-Cull info with DRM_IOCTL_NOUVEAU_GET_ZCULL_INFO
Cross-subsystem Changes:
coreboot:
- Clean up coreboot framebuffer support
dma-buf:
- Provide revoke mechanism for shared buffers
- Rename move_notify callback to invalidate_mappings and update users.
- Always enable move_notify
- Support dma_fence_was_initialized() test
- Protect dma_fence_ops by RCU and improve locking
- Fix sparse warnings
Core Changes:
atomic:
- Allocate drm_private_state via callback and convert drivers
atomic-helper:
- Use system_percpu_wq
buddy:
- Make buddy allocator available to all DRM drivers
- Document flags and structures
colorop:
- Add destroy helper and convert drivers
fbdev-emulation:
- Clean up
gem:
- Fix drm_gem_objects_lookup() error cleanup
Driver Changes:
amdgpu:
- Set panel_type to OELD for eDP
atmel-hlcdc:
- Support sana5d65 LCD controller
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve others
- fsl-ldb: Fix visual artifacts plus related DT property 'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- Clean up
imagination:
- Clean up
komeda:
- Fix integer overflow in AFBC checks
mcde:
- Improve bridge handling
nouveau:
- Provide Z-cull info to user space
- gsp: Support GA100
- Shutdown on PCI device shutdown
- Clean up
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- Fix Kconfig dependencies
panthor:
- Add tracepoints for power and IRQs
rcar-du:
- dsi: fix VCLK calculation
rockchip:
- vop2: Use drm_ logging functions
- Support DisplayPort on RK3576
sysfb:
- corebootdrm: Support system framebuffer on coreboot firmware; detect orientation
- Clean up pixel-format lookup
sun4i:
- Clean up
tilcdc:
- Use DT bindings scheme
- Use managed DRM interfaces
- Support DRM_BRIDGE_ATTACH_NO_CONNECTOR
- Clean up a lot of obsolete code
v3d:
- Clean up
vc4:
- Use system_percpu_wq
- Clean up
verisilicon:
- Support DC8200 plus DT bindings
virtgpu:
- Support PRIME imports with enabled 3D
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmmgV6IbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJEGgNwR1TC3oj3VsH/0xa8RvMN/B882kLA9N2
Dz9MR3sD3gCKiO3kzLTWncMnvI3qpSZCD/mR86+h7sEh5qiFFSiziZCCEF+BFkpB
UHK4mawDhMpOQiW+HhTR9V110WVrqtW8jVVg0db9XBE8y7xtj/lV3hv+/1N7WCkg
9fuxPkXby5cnW6aA8lPYzIdILFknwNVrzYCiPFmc4bXM5uynD0ft7KGR0dgViBIh
e6IQ+2POz0N0oVOdKGu10wvBQXKOznHpDPRK8844QrLb8CD/W8/mlifeqESDEsM1
TaPFdupXNdt0jdE2Jb+R+kGWfhM9T+CrtgaQ9LBNTDD8/RO2NrQIxDSYvnKw0DzQ
jlE=
=5H3Q
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-02-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1:
UAPI Changes:
connector:
- Add panel_type property
fourcc:
- Add ARM interleaved 64k modifier
nouveau:
- Query Z-Cull info with DRM_IOCTL_NOUVEAU_GET_ZCULL_INFO
Cross-subsystem Changes:
coreboot:
- Clean up coreboot framebuffer support
dma-buf:
- Provide revoke mechanism for shared buffers
- Rename move_notify callback to invalidate_mappings and update users.
- Always enable move_notify
- Support dma_fence_was_initialized() test
- Protect dma_fence_ops by RCU and improve locking
- Fix sparse warnings
Core Changes:
atomic:
- Allocate drm_private_state via callback and convert drivers
atomic-helper:
- Use system_percpu_wq
buddy:
- Make buddy allocator available to all DRM drivers
- Document flags and structures
colorop:
- Add destroy helper and convert drivers
fbdev-emulation:
- Clean up
gem:
- Fix drm_gem_objects_lookup() error cleanup
Driver Changes:
amdgpu:
- Set panel_type to OELD for eDP
atmel-hlcdc:
- Support sana5d65 LCD controller
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve others
- fsl-ldb: Fix visual artifacts plus related DT property 'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- Clean up
imagination:
- Clean up
komeda:
- Fix integer overflow in AFBC checks
mcde:
- Improve bridge handling
nouveau:
- Provide Z-cull info to user space
- gsp: Support GA100
- Shutdown on PCI device shutdown
- Clean up
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- Fix Kconfig dependencies
panthor:
- Add tracepoints for power and IRQs
rcar-du:
- dsi: fix VCLK calculation
rockchip:
- vop2: Use drm_ logging functions
- Support DisplayPort on RK3576
sysfb:
- corebootdrm: Support system framebuffer on coreboot firmware; detect orientation
- Clean up pixel-format lookup
sun4i:
- Clean up
tilcdc:
- Use DT bindings scheme
- Use managed DRM interfaces
- Support DRM_BRIDGE_ATTACH_NO_CONNECTOR
- Clean up a lot of obsolete code
v3d:
- Clean up
vc4:
- Use system_percpu_wq
- Clean up
verisilicon:
- Support DC8200 plus DT bindings
virtgpu:
- Support PRIME imports with enabled 3D
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260226143615.GA47200@linux.fritz.box
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The i2s/spdif clk are mandatory for rk3588, but not used
for the upcoming rk3576, so make it optional here.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260206010421.443605-4-andyshrk@163.com
In the implementation and integration of the SoC, the DW DisplayPort
hardware block can be configured to work in single, dual, quad pixel
mode on differnt platforms, so make the pixel mode set by plat_data
to support the upcoming rk3576 variant.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260206010421.443605-3-andyshrk@163.com
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Return the value of devm_drm_bridge_add() in order to propagate the
error properly, if it fails due to resource allocation failure or bridge
registration failure.
This ensures that the bind function fails safely rather than proceeding
with a potentially incomplete bridge setup.
Fixes: b726970486 ("drm/bridge: synopsys: dw-dp: add bridge before attaching")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260206040621.4095517-1-nichen@iscas.ac.cn
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Make use of the recently introduced dw_hdmi_qp_write_infoframe() helper
to simplify the writing of the Audio InfoFrame packet header and body
registers.
Additionally, discard the redundant static values identifying the frame
version and length.
Moreover, since now having dedicated callbacks per InfoFrame type, move
the implementation to dw_hdmi_qp_bridge_write_audio_infoframe() and
drop dw_hdmi_qp_config_audio_infoframe().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-5-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make use of the recently introduced dw_hdmi_qp_write_infoframe() helper
to simplify the writing of the Dynamic Range and Mastering (DRM)
InfoFrame packet header and body registers.
Moreover, since now having dedicated callbacks per InfoFrame type, move
the implementation to dw_hdmi_qp_bridge_write_hdr_drm_infoframe() and
drop dw_hdmi_qp_config_drm_infoframe().
While at it, also discard the unnecessary infoframe size verification,
as well as the redundant disabling of the packet transmission (already
done by the explicit call to the clear callback).
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-4-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make use of the recently introduced dw_hdmi_qp_write_infoframe() helper
to simplify the writing of the Auxiliary Video InfoFrame (AVI) packet
header and body registers.
Moreover, since now having dedicated callbacks per InfoFrame type, move
the implementation to dw_hdmi_qp_bridge_write_avi_infoframe() and drop
dw_hdmi_qp_config_avi_infoframe().
While at it, also discard the superfluous infoframe size verification.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-3-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
The hardware is capable of sending Source Product Description (SPD)
InfoFrames, hence enable the missing support.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-2-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Since commit b626b1a1c9 ("drm/bridge: refactor HDMI InfoFrame
callbacks"), the following warning is generated:
[ 13.654149] rockchip-drm display-subsystem: [drm] HDMI VSI not supported
Add the missing support for sending HDMI Vendor-Specific Infoframes.
Additionally, introduce dw_hdmi_qp_write_{pkt|infoframe}() helpers, as a
prerequisite to rework all dw_hdmi_qp_bridge_write_*_infoframe()
callbacks and get rid of some boilerplate code.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-1-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAml2lQweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0dcH/2yLU3IKlHSSgEDL
Qq3oBuRK/zoVOdy+CM+TmTdl2d1LnBd8J547xFStB7kVGf5mEkdFZdHLBSHRnKDf
ia1SGec06kyLpRX6x5T6FsfwOhkBmVsp59X0coM57QWxxenybugtzPvDO2TQ8/G4
buixJI0jJVgwRwXNzWB4n2W6FxNGui2A7gEN2mjtvkM2t/aDkiDjEqB8ve0pZJX9
4EWhxOgRFzwWgkd/bY+4wgXVXEt3GtI+3VvNncRqLIO00A/AnZOYmH4S2RQUDszD
IbyDscYYxloZcZMDXc3PN2WgD9DCGKuP3GpJGsOHbl0DN6JkqI9nwGsOFZKGVOeF
vbajwPE=
=iAOa
-----END PGP SIGNATURE-----
BackMerge tag 'v6.19-rc7' into drm-next
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix several issues in dw_dp_bind() error handling:
1. Missing return after drm_bridge_attach() failure - the function
continued execution instead of returning an error.
2. Resource leak: drm_dp_aux_register() is not a devm function, so
drm_dp_aux_unregister() must be called on all error paths after
aux registration succeeds. This affects errors from:
- drm_bridge_attach()
- phy_init()
- devm_add_action_or_reset()
- platform_get_irq()
- devm_request_threaded_irq()
3. Bug fix: platform_get_irq() returns the IRQ number or a negative
error code, but the error path was returning ERR_PTR(ret) instead
of ERR_PTR(dp->irq).
Use a goto label for cleanup to ensure consistent error handling.
Fixes: 86eecc3a9c ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260102155553.13243-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Having only a single set of callbacks, hdmi_clear_infoframe and
hdmi_write_infoframe, bridge drivers don't have an easy way to signal to
the DRM framework, which InfoFrames are actually supported by the
hardware and by the driver and which are not. Also, it makes it
extremely easy for HDMI bridge drivers to skip implementing the
seemingly required InfoFrames (e.g. HDMI VSI). Last, but not least,
those callbacks take a single 'type' parameter, which makes it
impossible to implement support for multiple VSIs (which will be
required once we start working on HDMI Forum VSI).
Split the callbacks into a per-InfoFrame-kind pairs, letting the bridge
drivers actually signal supported features. The implementation follows
the overall drm_bridge design, where the bridge has a single
drm_bridge_funcs implementation and signals, which functions are to be
called using the drm_bridge->ops flags.
The AVI and HDMI VSI are assumed to be required for a normal HDMI
operation (with the drivers getting a drm_warn_once() stub
implementation if one is missing). The Audio InfoFrame is handled by the
existing DRM_BRIDGE_OP_HDMI_AUDIO, while the SPD and HDR DRM InfoFrames
got new drm_bridge_ops values.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-5-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add support for the dw-hdmi-qp driver to handle devices with missing
HPD pins.
Since in this situation we are now polling for the EDID data via i2c
change the error message to a rate limited debug message when we are
unable to complete an i2c read, as a disconnected device would
otherwise fill dmesg with i2c read errors.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251119225526.70588-3-macroalpha82@gmail.com
After resume from suspend to RAM, the following splash is generated if
the HDMI driver is probed (independent of a connected cable):
[ 1194.484052] irq 80: nobody cared (try booting with the "irqpoll" option)
[ 1194.484074] CPU: 0 UID: 0 PID: 627 Comm: rtcwake Not tainted 6.17.0-rc7-g96f1a11414b3 #1 PREEMPT
[ 1194.484082] Hardware name: Rockchip RK3576 EVB V10 Board (DT)
[ 1194.484085] Call trace:
[ 1194.484087] ... (stripped)
[ 1194.484283] handlers:
[ 1194.484285] [<00000000bc363dcb>] dw_hdmi_qp_main_hardirq [dw_hdmi_qp]
[ 1194.484302] Disabling IRQ #80
Apparently the HDMI IP is losing part of its state while the system
is suspended and generates spurious interrupts during resume. The
bug has not yet been noticed, as system suspend does not yet work
properly on upstream kernel with either the Rockchip RK3588 or RK3576
platform.
Fixes: 128a9bf8ac ("drm/rockchip: Add basic RK3588 HDMI output support")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251014-rockchip-hdmi-suspend-fix-v1-1-983fcbf44839@collabora.com
Extend struct dw_hdmi_qp_plat_data to include the supported display
output formats and maximum bits per color channel. When provided by the
platform driver, use them to setup the HDMI bridge accordingly.
Additionally, improve debug logging in dw_hdmi_qp_bridge_atomic_enable()
to also show the current HDMI output format and bpc.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-2-3d3eed00a6db@collabora.com
Currently the TIMER_BASE_CONFIG0 register gets initialized to a fixed
value as initially found in vendor driver code supporting the RK3588
SoC. As a matter of fact the value matches the rate of the HDMI TX
reference clock, which is roughly 428.57 MHz.
However, on RK3576 SoC that rate is slightly lower, i.e. 396.00 MHz, and
the incorrect register configuration breaks CEC functionality.
Set the timer base according to the actual reference clock rate that
shall be provided by the platform driver. Otherwise fallback to the
vendor default.
While at it, also drop the unnecessary empty lines in
dw_hdmi_qp_init_hw().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-2-fa25163c4b08@collabora.com
Add support for the CEC interface of the Synopsys DesignWare HDMI QP TX
controller.
This is based on the downstream implementation, but rewritten on top of
the CEC helpers added recently to the DRM HDMI connector framework.
Also note struct dw_hdmi_qp_plat_data has been extended to include the
CEC IRQ number to be provided by the platform driver.
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Co-developed-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-1-fa25163c4b08@collabora.com
Add API dw_hdmi_set_sample_iec958() for IEC958 format because audio device
driver needs IEC958 information to configure this specific setting.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-5-shengjiu.wang@nxp.com
Add API dw_hdmi_to_plat_data() to fetch plat_data because audio device
driver needs it to enable(disable)_audio().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-4-shengjiu.wang@nxp.com
The DW DP TX Controller is compliant with the DisplayPort Specification
Version 1.4 with the following features:
* DisplayPort 1.4a
* Main Link: 1/2/4 lanes
* Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
* AUX channel 1Mbps
* Single Stream Transport(SST)
* Multistream Transport (MST)
* Type-C support (alternate mode)
* HDCP 2.2, HDCP 1.3
* Supports up to 8/10 bits per color component
* Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
* Pixel clock up to 594MHz
* I2S, SPDIF audio interface
Add library with common helpers to make it can be shared with
other SoC.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250822063959.692098-3-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In some application scenarios, we hope to get the corresponding
connector when the bridge's detect hook is invoked.
In most cases, we can get the connector by drm_atomic_get_connector_for_encoder
if the encoder attached to the bridge is enabled, however there will
still be some scenarios where the detect hook of the bridge is called
but the corresponding encoder has not been enabled yet. For instance,
this occurs when the device is hot plug in for the first time.
Since the call to bridge's detect is initiated by the connector, passing
down the corresponding connector directly will make things simpler.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-3-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Make the dp/hdmi_audio_* callback maintain the same parameter order as
get_modes and edid_read: first the bridge, then the connector.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-2-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
