The lt8713sx is a Type-C/DP1.4 to DP1.4/HDMI2.0 converter,
with three configurable DP1.4/HDMI2.0/DP++ output interfaces and
audio output interface.
Driver is required for firmware upgrade and enabling the bridge chip.
Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Simon Zhu <xmzhu@lontium.corp-partner.google.com>
Link: https://patch.msgid.link/20260303-lt8713sx-bridge-driver-v5-2-6cc2a855aafa@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
T-Head TH1520 SoC contains a Synopsys DesignWare HDMI controller (paired
with DesignWare HDMI TX PHY Gen2) that takes the "DP" output from the
display controller.
Add a driver for this controller utilizing the common DesignWare HDMI
code in the kernel.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Tested-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260129023922.1527729-6-zhengxingda@iscas.ac.cn
Convert it to drm bridge driver, it will be convenient for us to
migrate the connector part to the display driver later.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251016083843.76675-2-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Instead of using the "sha1" crypto_shash, simply call the sha1() library
function. This is simpler and faster.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250821175613.14717-1-ebiggers@kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Waveshare touchscreen consists of a DPI panel and a driver board.
The waveshare driver board consists of ICN6211 and a MCU to
convert DSI to DPI and control the backlight.
This driver treats the MCU and ICN6211 board as a whole unit.
It can support all resolution waveshare DSI2DPI based panel,
the timing table should come from 'panel-dpi' panel in the device tree.
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Suggested-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250806-waveshare-v3-3-fd28e01f064f@nxp.com
SSD2825 is a cost-effective MIPI Bridge Chip solution targeting mainly
smartphones. It can convert 24bit RGB interface into 4-lane MIPI-DSI
interface to drive display modules of up to 800 x 1366, while supporting
AMOLED, a-si LCD or LTPS panel technologies for smartphone applications.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250730055424.6718-3-clamor95@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The aux bridge uses devm_drm_of_get_bridge() from the panel bridge (and
correctly selects DRM_PANEL_BRIDGE). However panel bridge is not a
separate module, it is compiled into the drm_kms_helper.o. Select
DRM_KMS_HELPER too to express this dependency.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250411-aux-select-kms-v1-1-c4276f905a56@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
This fails to build without the KMS helper functions:
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o: in function `tda998x_detect_work':
tda998x_drv.c:(.text+0x4e6): undefined reference to `drm_kms_helper_hotplug_event'
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o: in function `tda998x_bind':
tda998x_drv.c:(.text.unlikely+0x33): undefined reference to `drm_simple_encoder_init'
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o:(.rodata+0x584): undefined reference to `drm_atomic_helper_connector_reset'
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o:(.rodata+0x590): undefined reference to `drm_helper_probe_single_connector_modes'
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o:(.rodata+0x5a4): undefined reference to `drm_atomic_helper_connector_duplicate_state'
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o:(.rodata+0x5a8): undefined reference to `drm_atomic_helper_connector_destroy_state'
Select the missing symbol and fix up the broken whitespace.
Fixes: 325ba852d1 ("drm/i2c: move TDA998x driver under drivers/gpu/drm/bridge")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250324210824.3094660-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
TDA998x is the HDMI bridge driver, incorporating drm_connector and
optional drm_encoder (created via the component bind API by the TICLDC
and HDLCD drivers). Thus it should be residing together with the other
DRM bridge drivers under drivers/gpu/drm/bridge/.
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-drm-move-tda998x-v3-3-214e0682a5e4@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add basic HDMI video output support. Currently, only RGB888 output
pixel format is supported. At the LVDS input side, the driver
supports single LVDS link and dual LVDS links with "jeida-24" LVDS
mapping.
Product link:
https://www.ite.com.tw/en/product/cate1/IT6263
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104032806.611890-11-victor.liu@nxp.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Use new HDMI Connector helpers in the Lontium LT9611 bridge driver.
Program InfoFrames using the helper's callbacks. Also use TMDS char rate
validation callback to filter out modes, instead of hardcoding 4k@30.
The Audio InfoFrame isn't yet handled by these helpers, it requires
additional drm_bridge interface changes.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240615-drm-bridge-hdmi-connector-v1-1-d59fc7865ab2@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
TDP158 is an AC-coupled DVI / HDMI to TMDS level shifting Redriver.
It supports DVI 1.0, HDMI 1.4b and 2.0b.
It supports 4 TMDS channels, HPD, and a DDC interface.
It supports dual power supply rails (1.1V on VDD, 3.3V on VCC)
for power reduction. Several methods of power management are
implemented to reduce overall power consumption.
It supports fixed receiver EQ gain using I2C or pin strap to
compensate for different lengths input cable or board traces.
Features
- AC-coupled TMDS or DisplayPort dual-mode physical layer input
to HDMI 2.0b TMDS physical layer output supporting up to 6Gbps
data rate, compatible with HDMI 2.0b electrical parameters
- DisplayPort dual-mode standard version 1.1
- Programmable fixed receiver equalizer up to 15.5dB
- Global or independent high speed lane control, pre-emphasis
and transmit swing, and slew rate control
- I2C or pin strap programmable
- Configurable as a DisplayPort redriver through I2C
- Full lane swap on main lanes
- Low power consumption (200 mW at 6Gbps, 8 mW in shutdown)
https://www.ti.com/lit/ds/symlink/tdp158.pdf
On our board, I2C_EN is pulled high.
Thus, this code defines a module_i2c_driver.
The default settings work fine for our use-case.
So this basic driver doesn't need to tweak any I2C registers.
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812-tdp158-v5-2-78684a84ec23@freebox.fr
drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit e075e496f5, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit 4d15125d7f, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/79824fec01eb9ab0673b9409f9b39cc8b5cc338d.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit 0323287de8, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit 3166e7e6d9, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/a40e70a0abd3d841c23c107d452a43fdd70ef37a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add a new LVDS controller driver for sam9x7 which does the following:
- Prepares and enables the LVDS Peripheral clock
- Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself
to the global bridge list.
- Identifies its output endpoint as panel and adds it to the encoder
display pipeline
- Enables the LVDS serializer
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Acked-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240421011050.43265-3-dharma.b@microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-3-dharma.b@microchip.com
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HDCP_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-11-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-10-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_AUX_BUS to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-9-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-8-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
While most display helpers Kconfig symbols have the DRM_DISPLAY prefix,
the DisplayPort AUX bus implementation uses DRM_DP_AUX_BUS.
Since the number of users is limited and it's a selected symbol, we can
easily rename it to make it consistent.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-1-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmV2PMQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgQIAKSdjtpkv+IeDwph
umLHxDlCTT8nl+TAhEYuxSdMiHt1i7+zyF0snnHhGthBRnBZBf+PDdkQOmqtjLZj
e591VGY7tdNCAVUwmRRaI82JFz9Pl1k8DXL3f+CE1+MfbpsirAecoIAL0rsvg+4f
ICKSAOBZonL7GT7IGrsbxgqGKCLC+2PcgNT4pADBdjtbC1nmVSLK21dtWr6i4xsn
CT9MxAnej1+EOpreyHhNZUVqfQy0/04x4OY0u/EOXU3PgpfGTrAzkyfwzcd/eit0
x59TZ0owDVXfvvdXUUAC0zG1th2ek5LKNtL+C4rKOoAbq7GZoQfjN5M/Ug+yykwE
aqm6CJ8=
=tZ+R
-----END PGP SIGNATURE-----
Backmerge tag 'v6.7-rc5' into drm-next
Linux 6.7-rc5
Alex requested this for some amdkfd work relying on the symbols exports.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Define a helper for creating simple transparent bridges which serve the
only purpose of linking devices into the bridge chain up to the last
bridge representing the connector. This is especially useful for
DP/USB-C bridge chains, which can span across several devices, but do
not require any additional functionality from the intermediate bridges.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-2-dmitry.baryshkov@linaro.org
Three DRM bridge drivers select GENERIC_PHY_MIPI_DPHY when GENERIC_PHY
might not be set. This causes Kconfig warnings and a build error.
WARNING: unmet direct dependencies detected for GENERIC_PHY_MIPI_DPHY
Depends on [n]: GENERIC_PHY [=n]
Selected by [y]:
- DRM_NWL_MIPI_DSI [=y] && DRM_BRIDGE [=y] && DRM [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y]
- DRM_SAMSUNG_DSIM [=y] && DRM [=y] && DRM_BRIDGE [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y]
(drm/bridge/cadence/Kconfig was found by inspection.)
aarch64-linux-ld: drivers/gpu/drm/bridge/samsung-dsim.o: in function `samsung_dsim_set_phy_ctrl':
drivers/gpu/drm/bridge/samsung-dsim.c:731: undefined reference to `phy_mipi_dphy_get_default_config_for_hsclk'
Prevent these warnings and build error by also selecting GENERIC_PHY
whenever selecting GENERIC_PHY_MIPI_DPHY.
Fixes: fced5a364d ("drm/bridge: cdns: Convert to phy framework")
Fixes: 44cfc62334 ("drm/bridge: Add NWL MIPI DSI host controller support")
Fixes: 171b3b1e0f ("drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Aleksandr Nogikh <nogikh@google.com>
Link: lore.kernel.org/r/20230803144227.2187749-1-nogikh@google.com
Cc: Adam Ford <aford173@gmail.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Adam Ford <aford173@gmail.com>
Tested-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804030140.21395-1-rdunlap@infradead.org
Replace the spaces with tab characters in the Kconfig file.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712065054.2377278-1-wenst@chromium.org
In order to support variable DPHY timings, it's necessary
to enable GENERIC_PHY_MIPI_DPHY so phy_mipi_dphy_get_default_config
can be used to determine the nominal values for a given resolution
and refresh rate.
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-5-aford173@gmail.com
Samsung MIPI DSIM controller is common DSI IP that can be used in various
SoCs like Exynos, i.MX8M Mini/Nano.
In order to access this DSI controller between various platform SoCs,
the ideal way to incorporate this in the drm stack is via the drm bridge
driver.
We already have a consolidated code for supporting component and bridge
based DRM drivers, so keep the exynos component based code in existing
exynos_drm_dsi.c and move generic bridge code as part of samsung-dsim.c
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Move the cadence dsi bridge under drm/bridge/cadence directory, to
prepare for adding j721e wrapper support
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-4-r-ravikumar@ti.com
This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner.
The pixel combiner takes two output streams from a single display
controller and manipulates the two streams to support a number
of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured
as either one screen, two screens, or virtual screens. The pixel
combiner is also responsible for generating some of the control signals
for the pixel link output channel. For now, the driver only supports
the bypass mode.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com
The driver uses crypto hash functions so it needs to select CRYPTO_HASH.
This fixes build errors:
drivers/gpu/drm/bridge/ite-it6505.o: in function `it6505_hdcp_wait_ksv_list':
ite-it6505.c:(.text+0x4c26): undefined reference to `crypto_alloc_shash'
ite-it6505.c:(.text+0x4c6d): undefined reference to `crypto_shash_digest'
ite-it6505.c:(.text+0x4c7d): undefined reference to `crypto_destroy_tfm'
ite-it6505.c:(.text+0x4d69): undefined reference to `crypto_destroy_tfm'
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613150653.1310029-1-zhengbin13@huawei.com
TI DLPC3433 is a MIPI DSI based display controller bridge
for processing high resolution DMD based projectors.
It has a flexible configuration of MIPI DSI and DPI signal
input that produces a DMD output in RGB565, RGB666, RGB888
formats.
It supports upto 720p resolution with 60 and 120 Hz refresh
rates.
Add bridge driver for it.
Signed-off-by: Christopher Vollo <chris@renewoutreach.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603140349.3563612-2-jagan@amarulasolutions.com
The Freescale i.MX8MP LDB bridge is only present on Freescale i.MX8MP
SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user
about this driver when configuring a kernel without i.MX SoC support.
Fixes: 463db5c2ed ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/449e08ca791a3ca308de5477c1bdc1f6eb1b34e7.1652104211.git.geert+renesas@glider.be
The IT6505 is using functions provided by the DRM_DP_HELPER driver.
In order to avoid having the bridge enabled but the helper disabled,
let's add a select in order to be sure that the DP helper functions are
always available.
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426141536.274727-1-fparent@baylibre.com
The i.MX8MP contains two syscon registers which are responsible
for configuring the on-SoC DPI-to-LVDS serializer. Implement a
simple bridge driver for this serializer.
--
- Add sentinel of_device_table
- Add RB from Sam
- Rename to fsl-ldb altogether
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
V2: - Rename syscon to fsl,syscon
V3: - Consistently use MX8MP
V4: - Fix MODULE_DESCRIPTION to also use MX8MP
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426193645.244792-2-marex@denx.de
Move DRM's HDCP helper library into the display/ subdirectory and add
it to DRM's display helpers. Split the header file into core and helpers.
Update all affected drivers. No functional changes.
v3:
* fix Kconfig dependencies
v2:
* fix include statements (Jani, Javier)
* update Kconfig symbols
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-7-tzimmermann@suse.de
Replace the DP-helper module with a display-helper module. The
support for DisplayPort becomes an internal option that drivers
have to select. Update all related Kconfig and Makefile rules.
Besides the existing code for DisplayPort, the new module will
contain helpers for other video-output standards, such as HDMI.
Drivers will have to select their required video-output helpers.
Linking all display-related code into a single module avoids the
proliferation of small kernel modules.
The module parameters drm_dp_cec_unregister_delay, dp_aux_i2c_speed_khz,
and dp_aux_i2c_transfer_size are moving from the drm_dp_helper namespace
to drm_display_helper.
v2:
* mention module parameters in commit message (Javier)
* distiguish between display module and DP support in Kconfig
* update Makefile rules for DP helpers
* move Kconfig rules into separate file under display/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-4-tzimmermann@suse.de
it6505 depends on DRM_DP_AUX_BUS, the kconfig for it6505 should
reflect this dependency using 'select'.
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421131415.1289469-1-robert.foss@linaro.org
Add driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI to
Single-link/Dual-Link DSI/LVDS or Single DPI bridge. This chip is highly
capable at converting formats, but sadly it is also highly undocumented.
This driver is written without any documentation from Lontium and based
only on shreds of information available in various obscure example codes,
hence long runs of unknown register patches and lengthy delays in various
places. Whichever register meaning could be divined from its behavior has
at least a comment around it.
Currently the only mode tested is Single-link DSI to Single-link LVDS.
Dual-link LVDS might work as well, the register programming is in place,
but is untested.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419143958.94873-2-marex@denx.de
