Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
mpf_ops_parse_header() reads header_size from the bitstream at
MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression
*(buf + header_size - 1) reads one byte before the buffer start.
Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core
guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET.
The only real gap is the zero header_size case, which cannot be
resolved by providing a larger buffer, so return -EINVAL.
Fixes: 5f8d4a9008 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260518190742.61426-4-sebasjosue84@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
afu_ioctl_dma_map() accepts a 64-bit length from userspace via
DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value
is passed to afu_dma_pin_pages() where npages is derived as
length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes
int nr_pages, causing implicit truncation if length is very large.
Validate map.length at the ioctl entry point before calling
afu_dma_map_region(), rejecting values whose page count exceeds
INT_MAX.
Fixes: fa8dda1ede ("fpga: dfl: afu: add DFL_FPGA_PORT_DMA_MAP/UNMAP ioctls support")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260518190742.61426-3-sebasjosue84@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
dfh_get_param_size() can return a parameter size larger than the feature
region because the loop bounds check is evaluated before incrementing
size. If the EOP (End of Parameters) bit is set in the same iteration,
the inflated size is returned without re-validation against max.
This can cause create_feature_instance() to call memcpy_fromio() with a
size exceeding the ioremap'd region when a malicious FPGA device provides
crafted DFHv1 parameter headers.
Add a bounds check after the size increment to ensure the accumulated
size never exceeds the feature boundary.
Fixes: 4747ab89b4 ("fpga: dfl: add basic support for DFHv1")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260518190742.61426-2-sebasjosue84@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Limiting the scope of devicetree support to CONFIG_OF prevents use of this
driver with ACPI via PRP0001. Drop the dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260508082716.1156192-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The whole purpose of the terminator entry is to be the last one.
The trailing comma makes this statement prone to failure. On top
of that the style is used for the entries is unusual. Standardize
this all by moving terminator entries to their own lines and drop
trailing commas.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260508082716.1156192-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Add a new driver for loading binary firmware to configuration
RAM using "SPI passive mode" on Efinix FPGAs.
Efinix passive SPI configuration requires chip select to remain asserted
from reset until the complete bitstream and trailing idle clocks have
been transferred, so the driver keeps CS active with cs_change and locks
the SPI bus for the duration of configuration.
Signed-off-by: Ian Dannapel <iansdannapel@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260416144237.373852-4-iansdannapel@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The ts73xx-fpga driver currently only matches by platform device name,
which prevents it from being probed when the device is described in a
device tree. Add an of_device_id table so the driver can match against
the "technologic,ts7300-fpga" compatible string.
The TS-7350 and TS-7390 use different FPGAs with a different programming
interface, so while the driver is named "ts73xx-fpga", it doesn't apply
to them.
Signed-off-by: Phil Pemberton <philpem@philpem.me.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260409122016.3940462-3-philpem@philpem.me.uk
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
According to Documentation/filesystems/sysfs.rst, show() functions
should use sysfs_emit() when formatting the value to be returned to user
space.
This keeps consistent usage of sysfs_emit() across the same file.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
[ Yilun: clarify the necessity of the change in changelog ]
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260117043626.2188219-1-dinguyen@kernel.org
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The dfl code adds a bus. If it is built-in and there is a built-in driver
as well, the dfl module_init may be called after the driver module_init,
leading to a failure to register the driver as the bus has not been added
yet.
Use subsys_initcall, which guarantees it will be called before the drivers
init code.
Without the fix, we see failures like this:
[ 0.479475] Driver 'intel-m10-bmc' was unable to register with bus_type 'dfl' because the bus was not initialized.
Cc: stable@vger.kernel.org
Fixes: 9ba3a0aa09 ("fpga: dfl: create a dfl bus type to support DFL devices")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20251215-dfl_subsys-v1-1-21807bad6b10@igalia.com
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
When parsing the region bridge list from the "fpga-bridges" device tree
property, the of-fpga-region driver will silently ignore bridges which fail
to be obtained, for example due to a missing bridge driver or invalid
phandle.
This can lead to hardware issues if a region bridge stays coupled when
partial programming is performed.
Fail if any of the bridges specified in "fpga-bridges" cannot be obtained.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://lore.kernel.org/r/20251127-of-fpga-region-fail-if-bridges-not-found-v1-1-ca674f8d07eb@bootlin.com
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The "xlnx,fpga-slave-serial" devicetree compatible string currently misses
its SPI device ID entry. Without an spi_device_id table, the driver still
works with device tree, but triggers the following runtime warning when
registered via SPI core:
SPI driver xlnx-slave-spi has no spi_device_id for xlnx,fpga-slave-serial
Fix it by adding a corresponding spi_device_id table entry.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20251026110237.986279-1-festevam@gmail.com
[ Yilun: Remove extra whitespaces ]
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
dma_map_sgtable() returns only 0 or the error code. Read sgt->nents to
get the number of mapped segments.
Fixes: 37e0070322 ("zynq_fpga: use sgtable-based scatterlist wrappers")
Reported-by: Pavel Pisa <pisa@fel.cvut.cz>
Closes: https://lore.kernel.org/linux-fpga/202508041548.22955.pisa@fel.cvut.cz/
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Tested-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://lore.kernel.org/r/20250806070605.1920909-2-yilun.xu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of statterlists related calls. dma_unmap_sg() function
has to be called with the number of elements originally passed to the
dma_map_sg() function, not the one returned in sgtable's nents.
CC: stable@vger.kernel.org
Fixes: 425902f5c8 ("fpga zynq: Use the scatterlist interface")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20250616120932.1090614-1-m.szyprowski@samsung.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
- Peter hands over the maintain role of m10bmc-sec driver to Matthew.
- Qasim's change fix potential NULL pointer for fpga test.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCaCDOLBMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIza47QA/0ktlQtDL6FP1Y+1zR+7ouVYhQrqFdBx
owEuiuOUp7o8AP0a7ah1cQhXavXkO4oYK5wLHzkB2ywyBEVUOuL36AEMCQ==
=vW2j
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.16-rc1
- Peter hands over the maintain role of m10bmc-sec driver to Matthew.
- Qasim's change fix potential NULL pointer for fpga test.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt()
fpga: m10bmc-sec: change contact for secure update driver
fpga_mgr_test_img_load_sgt() allocates memory for sgt using
kunit_kzalloc() however it does not check if the allocation failed.
It then passes sgt to sg_alloc_table(), which passes it to
__sg_alloc_table(). This function calls memset() on sgt in an attempt to
zero it out. If the allocation fails then sgt will be NULL and the
memset will trigger a NULL pointer dereference.
Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL().
Reviewed-by: Marco Pagani <marco.pagani@linux.dev>
Fixes: ccbc1c3021 ("fpga: add an initial KUnit suite for the FPGA Manager")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20250422153737.5264-1-qasdev00@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Modules without a description now cause a warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fpga/tests/fpga-bridge-test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fpga/tests/fpga-mgr-test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fpga/tests/fpga-region-test.o
Link: https://lkml.kernel.org/r/20250324173242.1501003-4-arnd@kernel.org
Fixes: 6c6c1fc09d ("modpost: require a MODULE_DESCRIPTION()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Hao Wu <hao.wu@intel.com>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Cc: Marco Pagani <marpagan@redhat.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Moritz Fischer <mdf@kernel.org>
Cc: Russ Weight <russ.weight@linux.dev>
Cc: Stehen Rothwell <sfr@canb.auug.org.au>
Cc: Tom Rix <trix@redhat.com>
Cc: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Building with W=1 shows a warning about versal_fpga_of_match being unused when
CONFIG_OF is disabled:
drivers/fpga/versal-fpga.c:62:34: error: unused variable 'versal_fpga_of_match' [-Werror,-Wunused-const-variable]
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225163510.4168911-1-arnd@kernel.org
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Increase the timeout for SDM (Secure device manager) data credits from
20ms to 40ms. Internal stress tests running at 500 loops failed with the
current timeout of 20ms. At the start of a FPGA configuration, the CVP
host driver reads the transmit credits from SDM. It then sends bitstream
FPGA data to SDM based on the total credits. Each credit allows the
CVP host driver to send 4kBytes of data. There are situations whereby,
the SDM did not respond in time during testing.
Signed-off-by: Ang Tien Sung <tien.sung.ang@intel.com>
Signed-off-by: Kuhanh Murugasen Krishnan <kuhanh.murugasen.krishnan@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20250212221249.2715929-1-tien.sung.ang@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
- Peter's change fixes SRIOV problems for Intel DFL device.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCZ3+G3hMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzaeFcBAIrDBiM5fSa027pOQY5lVjZU6k/Ix+vr
hKSOkvzbSxQxAPwPfCpmpX0MLz5waISI2P8sULCUQQMdQAu2JPu5WuvNDg==
=ewk9
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.14-rc1
- Peter's change fixes SRIOV problems for Intel DFL device.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: dfl: destroy/recreate feature platform device on port release/assign
fpga: dfl: drop unneeded get_device() and put_device() of feature device
fpga: dfl: remove unneeded function build_info_create_dev()
fpga: dfl: allocate platform device after feature device data
fpga: dfl: store platform device id in feature device data
fpga: dfl: store platform device name in feature device data
fpga: dfl: store MMIO resources in feature device data
fpga: dfl: convert features from flexible array member to separate array
fpga: dfl: factor out feature device data from platform device data
fpga: dfl: factor out feature device registration
fpga: dfl: refactor internal DFL APIs to take/return feature device data
fpga: dfl: store FIU type in feature platform data
fpga: dfl: factor out feature data creation from build_info_commit_dev()
fpga: dfl: pass feature platform data instead of device as argument
fpga: dfl: afu: define local pointer to feature device
fpga: dfl: afu: use parent device to log errors on port enable/disable
fpga: dfl: return platform data from dfl_fpga_inode_to_feature_dev_data()
fpga: dfl: omit unneeded argument pdata from dfl_feature_instance_init()
Now that the internal DFL APIs have been converted to consume DFL
enumeration info from a separate structure, dfl_feature_dev_data, which
lifetime is independent of the feature device, proceed to completely
destroy and recreate the feature platform device on port release and
assign, respectively. This resolves a longstanding issue in the use of
platform_device_add(), which states to "not call this routine more than
once for any device structure" and which used to print a kernel warning.
The function feature_dev_unregister() resets the device pointer in the
feature data to NULL to signal that the feature platform device has been
destroyed. This substitutes the previous device_is_registered() checks.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-19-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The feature device data was originally stored as platform data, hence
the memory allocation was tied to the lifetime of the feature device.
Now that the feature device data is tied to the lifetime of the DFL PCIe
FPGA device instead, get_device() and put_device() are no longer needed.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-18-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Remove the function build_info_create_dev(), which no longer serves its
original purpose now that the allocation of the platform device has been
moved to feature_dev_register().
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-17-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Delay calling platform_device_alloc() from build_info_create_dev() to
feature_dev_register(), now that the feature device data contains all
necessary data to create the feature device. This completes the new
function feature_dev_register(), which will be reused in a subsequent
commit to fully recreate the feature device when assigning a port.
In the function feature_dev_unregister(), reset the device pointer in
the feature data to NULL to signal that the platform device has been
destroyed. This will substitute device_is_registered() in a subsequent
commit. Reset the device pointer of each sub feature for consistency.
Convert is_feature_dev_detected() to check whether binfo->type is not
DFL_ID_MAX for deciding whether a feature device was detected during
feature parsing, instead of checking binfo->feature_dev for non-NULL.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-16-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Delay the feature device id allocation from build_info_create_dev() to
binfo_create_feature_dev_data() and store the id in the feature device
data before copying it to the device. This will allow reusing the same
id in a subsequent commit which completely destroys and recreates the
feature device when releasing and reassigning the corresponding port.
Instead of manually freeing the id when no longer needed, use a
device-managed resource with a custom action to automatically free
the id right before the feature device data is freed. The id registry
is guaranteed to be allocated when dfl_id_free_action() is invoked,
since the DFL PCIe device and its device-managed resources will be
destroyed before dfl_ids_destroy() is called in dfl_fpga_exit().
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-15-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Add a new member, pdev_name, to the structure dfl_feature_dev_data that
holds the platform device name for convenience. A subsequent commit will
completely destroy the platform device during port release, after which
fdata->dev is unavailable, while fdata itself remains available.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-14-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Instead of directly copying the MMIO resource of each feature to the
feature device resources, add a new member to the feature device data
to store the resources and copy them to the feature device using
platform_device_add_resources(). This prepares a subsequent commit
which completely destroys and recreates the feature device when
releasing and reassigning the corresponding port, respectively.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-13-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Use a separate array allocation for features and substitute a pointer
for the flexible array member in the feature device data. A subsequent
commit will add another array for resources. The current commit converts
the flexible array member to a separate allocation for consistency.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-12-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Add a structure dfl_feature_dev_data to hold the DFL enumeration
info previously held in dfl_feature_platform_data. Allocate the new
structure using device-managed memory whose lifetime is bound to the
lifetime of the physical DFL, e.g., PCIe FPGA device. In a subsequent
commit, this will allow the feature platform device to be completely
destroyed and recreated on port release and assign, respectively, while
retaining the feature data in the new dfl_feature_dev_data structure.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-11-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Add separate functions, feature_dev_{register,unregister}(), that wrap
platform_device_add() and platform_device_unregister(), respectively.
These are invoked once per feature device in this commit but will be
reused in a subsequent commit to destroy and recreate the platform
device when the corresponding port is released and reassigned.
The function feature_dev_register() will be extended in subsequent
commits to allocate the platform device, add resources and platform
data, and finally add the platform device to the device hierarchy.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-10-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
This change prepares a subsequent commit which factors out the DFL
enumeration info from the structure dfl_feature_platform_data into
a new structure dfl_feature_dev_data, whose lifetime is independent
of the feature device which will be destroyed during port release.
Add an alias dfl_feature_dev_data for dfl_feature_platform_data, and an
alias to_dfl_feature_dev_data() for dev_get_platdata(), and refactor
internal DFL APIs to take/return dfl_feature_dev_data instead. The
aliases will be replaced with implementations in a subsequent commit.
This change does not introduce any functional changes.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-9-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Remove the local function feature_dev_id_type() in favor of persisting
the FIU type in struct dfl_feature_platform_data. Add type to struct
build_feature_devs_info and drop argument to build_info_create_dev().
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-8-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Add a separate function, binfo_create_feature_dev_data(), which allocates
and populates the feature platform data, and call the function from
build_info_commit_dev(), which registers the feature platform device.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-7-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
For functions which use the feature platform data, instead of invoking
dev_get_platdata() on the device, directly pass the data as an argument.
This patch is part of a refactoring of the internal DFL APIs to move
the feature device data into a new struct dfl_feature_dev_data which
lifetime is independent of the corresponding platform device.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-6-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
AFU port enable/disable may be triggered from userspace at any point,
e.g., after a port has been released. This commit prepares a subsequent
commit that destroys the port platform device on port release, which is
then no longer available during port enable/disable. Use the parent,
physical DFL, e.g., PCIe FPGA device instead for logging errors.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-4-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Refactor dfl_fpga_inode_to_feature_dev() to directly return the feature
device platform data instead of the platform device, and retrieve the
device from the data. The null pointer checks are not needed since the
platform device is guaranteed to have associated feature device data.
This patch is part of a refactoring of the internal DFL APIs to move
the feature device data into a new struct dfl_feature_dev_data which
lifetime is independent of the corresponding platform device.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-3-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The argument pdata passed to dfl_feature_instance_init() was never used.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241120011035.230574-2-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Here is the "big and hairy" char/misc/iio and other small driver
subsystem updates for 6.13-rc1. Sorry for doing this at the end of the
merge window, conference and holiday travel got in the way on my side
(hence the 5am pull request emails...)
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible. I think this is the tipping point,
expect to see way more rust drivers going forward now that these
bindings are present. Next merge window hopefully we will have pci
and platform drivers working, which will fully enable almost all
driver subsystems to start accepting (or at least getting) rust
drivers. This is the end result of a lot of work from a lot of
people, congrats to all of them for getting this far, you've proved
many of us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
Note, there is a semi-hairy rust merge conflict when pulling this. The
resolution has been in linux-next for a while and can be seen here:
https://lore.kernel.org/all/20241111173459.2646d4af@canb.auug.org.au/
All of these have been in linux-next for a while, with no other reported
issues other than that merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKHQCgvI4Muu2tpdINBVe24Zc8S3ozg0AAnRNg3F7r
ikneftUDYtuviSGU/Rs8
=CW+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
