Uninitialized pointers with `__free` attribute can cause undefined
behaviour as the memory assigned(randomly) to the pointer is freed
automatically when the pointer goes out of scope
arm doesn't have any bugs related to this as of now, but
it is better to initialize and assign pointers with `__free` attr
in one statement to ensure proper scope-based cleanup
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aPiG_F5EBQUjZqsl@stanley.mountain/
Signed-off-by: Ally Heev <allyheev@gmail.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251105-aheev-uninitialized-free-attr-arm-v1-1-f7b6cb5d3361@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The FF-A driver currently performs loose comparisons when checking the
supported FF-A feature, which can inadvertently treat future or
intermediate revisions as compatible.
Replace generic `version {>,<} FFA_VERSION_1_*` pattern checks with
feature-specific macros that clearly express which functionality
depends on FF-A versioning.
This improves readability and future maintainability by tying each
feature (e.g. GET_COUNT_ONLY, size/UUID/exec state in responses) to
explicit version requirements instead of relying on generic version
comparisons. This improves robustness and clarity as the FF-A
specification evolves.
No functional change, only improves code readability.
Message-Id: <20251016094111.946236-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
ffa_init() maps the Rx/Tx buffers via ffa_rxtx_map() but on the
partition setup failure path it never unmaps them.
Add the missing ffa_rxtx_unmap() call in the error path so that
the Rx/Tx buffers are properly released before freeing the backing
pages.
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Message-Id: <20251210031656.56194-1-lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Replace the __free(kfree) in cs_dsp_load() and cs_dsp_load_coeff() with
a kfree(buf) at the end of the function.
The use of __free() can create new cleanup bugs that are difficult to spot
because the defective code is idiomatically correct regular C. In these two
functions the __free() was mixed with gotos, and also used the suspect
declaration __free(kfree) = NULL;.
The __free() did not do anything to simplify the code. There aren't any
early returns after the pointer is set, and the __free() can be replaced by
a kfree() at the end of the function.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 900baa6e7b ("firmware: cs_dsp: Remove redundant download buffer allocator")
Link: https://patch.msgid.link/20251201160729.231867-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't use __free(kfree) in cs_dsp_debugfs_string_read. Instead use
normal kfree() to cleanup.
The use of __free() can create new cleanup bugs that are difficult to spot
because the defective code is idiomatically correct regular C. This
function used the suspect declaration __free(kfree) = NULL;.
The __free(kfree) didn't really do anything here. The function can be
rearranged to avoid any need to return or goto within the code.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 3045e29d24 ("firmware: cs_dsp: Append \n to debugfs string during read")
Link: https://patch.msgid.link/20251202113425.413700-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1, Add basic LoongArch32 support;
2, Select HAVE_ARCH_BITREVERSE in Kconfig;
3, Fix build and boot for CONFIG_RANDSTRUCT;
4, Correct the calculation logic of thread_count;
5, Some bug fixes and other small changes.
Note: Build infrastructures of LoongArch32 are not enabled yet, because
we need to adjust irqchip drivers and wait for GNU toolchain be upstream
first.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmk2pCUWHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImevedD/9glTZwBqWOnBIaw1ldxfmoEQS2
PCFxxZPG+cHO3Kgg5LrMgz/2UI2bOnrcx5a7Ma0v4TDFyH9Cp/p4NGosndsq5b1v
3xoPXytKjiKJMyWNAZy7ytP8FmYs0v6rIu3ZvW6N4GPyNm3VC96LdxXtAXnio134
TruTALLZ6U/EDUz6VmyRgWAR8HXgS08v3Vuh4giZABRHQAWM7u8tUxGZNvjkLqKb
TsQz8Ko42VEkbwD5MCMIQrviJBOReycANU9jlmJ1JNsJVKjqcjtSpCpO5cnJg3iL
93M3wiTy/iWrIdQwjGeXgqco8iQItozVIf0FwVum82OLyoxx7G9qZAx5aQg4zjkA
JvFB0Quecs8e3HaGJCPGytv2r56cMTh73KzarZBXhCPDLun2pssLtqVwYxw/7KOB
MoVOekFQs6+8Un9Rffrj6PGeZQwflpsp7Z4khEpf4qULuI6BpRCFLojFhwk6e4V/
DzoYmdpg1TnwNlp74aMv7gWDfnBBfKXDAswbtyfU/aY0+jrf0f5pNfT100Dd0PAw
VNzNjkH/JGml/0iqf7T3p6h/XalR7/obsg4O4L39I6A1CL3gkZf35jtMtzf7RsIp
cVYtumlFvrU7hzKpKcq0OXFji7/8HbAOgrIno5MQGjFfKPJPk+wb5XpgWKdhVtC1
Y94az2s8PmYA4/v9QA==
=G9hi
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add basic LoongArch32 support
Note: Build infrastructures of LoongArch32 are not enabled yet,
because we need to adjust irqchip drivers and wait for GNU toolchain
be upstream first.
- Select HAVE_ARCH_BITREVERSE in Kconfig
- Fix build and boot for CONFIG_RANDSTRUCT
- Correct the calculation logic of thread_count
- Some bug fixes and other small changes
* tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
LoongArch: Adjust default config files for 32BIT/64BIT
LoongArch: Adjust VDSO/VSYSCALL for 32BIT/64BIT
LoongArch: Adjust misc routines for 32BIT/64BIT
LoongArch: Adjust user accessors for 32BIT/64BIT
LoongArch: Adjust system call for 32BIT/64BIT
LoongArch: Adjust module loader for 32BIT/64BIT
LoongArch: Adjust time routines for 32BIT/64BIT
LoongArch: Adjust process management for 32BIT/64BIT
LoongArch: Adjust memory management for 32BIT/64BIT
LoongArch: Adjust boot & setup for 32BIT/64BIT
LoongArch: Adjust common macro definitions for 32BIT/64BIT
LoongArch: Add adaptive CSR accessors for 32BIT/64BIT
LoongArch: Add atomic operations for 32BIT/64BIT
LoongArch: Add new PCI ID for pci_fixup_vgadev()
LoongArch: Add and use some macros for AVEC
LoongArch: Correct the calculation logic of thread_count
LoongArch: Use unsigned long for _end and _text
LoongArch: Use __pmd()/__pte() for swap entry conversions
LoongArch: Fix arch_dup_task_struct() for CONFIG_RANDSTRUCT
LoongArch: Fix build errors for CONFIG_RANDSTRUCT
...
the core clk framework. The majority diff wise is for the new Rockchip and
Qualcomm clk drivers which is mostly lines and lines of data structures to
describe the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up higher in
the diffstat this time because they added quite a few clks all over the place.
Overall it is a semi-quiet release that has some new clk drivers and the usual
fixes for clock data that was wrong or missing and non-critical cleanups that
plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver
-----BEGIN PGP SIGNATURE-----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=Ivih
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions.
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now, with no reported
issues other than a merge conflict with your tree that should be trivial
to handle (take both sides).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTNDQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykVIACeN0AiTosAtp4CAGe4fAwM7EvbnkQAoNJE5NAx
Ef31/j1Tq2pCTWt6SVbs
=AY/e
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted
cleanups and fixes including the WQ_PERCPU series. The biggest core
change is the new allocation of pseudo-devices which allow the sending
of internal commands to a given SCSI target.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaTJf+BsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUC9QEA+q+UqGr7hPTs9C4kdLoxjDpG6tmXo11H
ZkuXKjR5rDABAPPe3HV0Bk9C9jpLVPLp+fGJvgw//rib+XtYMjwxAJ71
=bQZL
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted
cleanups and fixes including the WQ_PERCPU series.
The biggest core change is the new allocation of pseudo-devices which
allow the sending of internal commands to a given SCSI target"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (147 commits)
scsi: MAINTAINERS: Add the UFS include directory
scsi: scsi_debug: Support injecting unaligned write errors
scsi: qla2xxx: Fix improper freeing of purex item
scsi: ufs: rockchip: Fix compile error without CONFIG_GPIOLIB
scsi: ufs: rockchip: Reset controller on PRE_CHANGE of hce enable notify
scsi: ufs: core: Use scsi_device_busy()
scsi: ufs: core: Fix single doorbell mode support
scsi: pm80xx: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedi: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: ibmvscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedf: Add WQ_PERCPU to alloc_workqueue() users
scsi: bnx2fc: Add WQ_PERCPU to alloc_workqueue() users
scsi: be2iscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: message: fusion: Add WQ_PERCPU to alloc_workqueue() users
scsi: lpfc: WQ_PERCPU added to alloc_workqueue() users
scsi: scsi_transport_fc: WQ_PERCPU added to alloc_workqueue users()
scsi: scsi_dh_alua: WQ_PERCPU added to alloc_workqueue() users
scsi: qla2xxx: WQ_PERCPU added to alloc_workqueue() users
scsi: target: sbp: Replace use of system_unbound_wq with system_dfl_wq
...
32BIT platforms only have 32bit CSR/IOCSR registers, 64BIT platforms
have both 32bit/64bit CSR/IOCSR registers. Now there are both 32bit and
64bit CSR accessors:
csr_read32()/csr_write32()/csr_xchg32();
csr_read64()/csr_write64()/csr_xchg64();
Some CSR registers (address and timer registers) are 32bit length on
32BIT platform and 64bit length on 64BIT platform. To avoid #ifdefs here
and there, they need adaptive accessors, so we define and use:
csr_read()/csr_write()/csr_xchg();
IOCSR doesn't have a "natural length", which means a 64bit register can
be treated as two 32bit registers, so we just use two 32bit accessors to
emulate a 64bit accessors.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for
power management, as a preparation for future Tegra specific
changes.
- Reset controller updates with added drivers for LAN969x, eic770
and RZ/G3S SoCs.
- Protection of system controller registers on Renesas and Google SoCs,
to prevent trivially triggering a system crash from e.g. debugfs
access.
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas
-----BEGIN PGP SIGNATURE-----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=HvlN
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
- The 10 patch series "__vmalloc()/kvmalloc() and no-block support" from
Uladzislau Rezki reworks the vmalloc() code to support non-blocking
allocations (GFP_ATOIC, GFP_NOWAIT).
- The 2 patch series "ksm: fix exec/fork inheritance" from xu xin fixes
a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not inherited
across fork/exec.
- The 4 patch series "mm/zswap: misc cleanup of code and documentations"
from SeongJae Park does some light maintenance work on the zswap code.
- The 5 patch series "mm/page_owner: add debugfs files 'show_handles'
and 'show_stacks_handles'" from Mauricio Faria de Oliveira enhances the
/sys/kernel/debug/page_owner debug feature. It adds unique identifiers
to differentiate the various stack traces so that userspace monitoring
tools can better match stack traces over time.
- The 2 patch series "mm/page_alloc: pcp->batch cleanups" from Joshua
Hahn makes some minor alterations to the page allocator's per-cpu-pages
feature.
- The 2 patch series "Improve UFFDIO_MOVE scalability by removing
anon_vma lock" from Lokesh Gidra addresses a scalability issue in
userfaultfd's UFFDIO_MOVE operation.
- The 2 patch series "kasan: cleanups for kasan_enabled() checks" from
Sabyrzhan Tasbolatov performs some cleanup in the KASAN code.
- The 2 patch series "drivers/base/node: fold node register and
unregister functions" from Donet Tom cleans up the NUMA node handling
code a little.
- The 4 patch series "mm: some optimizations for prot numa" from Kefeng
Wang provides some cleanups and small optimizations to the NUMA
allocation hinting code.
- The 5 patch series "mm/page_alloc: Batch callers of
free_pcppages_bulk" from Joshua Hahn addresses long lock hold times at
boot on large machines. These were causing (harmless) softlockup
warnings.
- The 2 patch series "optimize the logic for handling dirty file folios
during reclaim" from Baolin Wang removes some now-unnecessary work from
page reclaim.
- The 10 patch series "mm/damon: allow DAMOS auto-tuned for per-memcg
per-node memory usage" from SeongJae Park enhances the DAMOS auto-tuning
feature.
- The 2 patch series "mm/damon: fixes for address alignment issues in
DAMON_LRU_SORT and DAMON_RECLAIM" from Quanmin Yan fixes DAMON_LRU_SORT
and DAMON_RECLAIM with certain userspace configuration.
- The 15 patch series "expand mmap_prepare functionality, port more
users" from Lorenzo Stoakes enhances the new(ish)
file_operations.mmap_prepare() method and ports additional callsites
from the old ->mmap() over to ->mmap_prepare().
- The 8 patch series "Fix stale IOTLB entries for kernel address space"
from Lu Baolu fixes a bug (and possible security issue on non-x86) in
the IOMMU code. In some situations the IOMMU could be left hanging onto
a stale kernel pagetable entry.
- The 4 patch series "mm/huge_memory: cleanup __split_unmapped_folio()"
from Wei Yang cleans up and optimizes the folio splitting code.
- The 5 patch series "mm, swap: misc cleanup and bugfix" from Kairui
Song implements some cleanups and a minor fix in the swap discard code.
- The 8 patch series "mm/damon: misc documentation fixups" from SeongJae
Park does as advertised.
- The 9 patch series "mm/damon: support pin-point targets removal" from
SeongJae Park permits userspace to remove a specific monitoring target
in the middle of the current targets list.
- The 2 patch series "mm: MISC follow-up patches for linux/pgalloc.h"
from Harry Yoo implements a couple of cleanups related to mm header file
inclusion.
- The 2 patch series "mm/swapfile.c: select swap devices of default
priority round robin" from Baoquan He improves the selection of swap
devices for NUMA machines.
- The 3 patch series "mm: Convert memory block states (MEM_*) macros to
enums" from Israel Batista changes the memory block labels from macros
to enums so they will appear in kernel debug info.
- The 3 patch series "ksm: perform a range-walk to jump over holes in
break_ksm" from Pedro Demarchi Gomes addresses an inefficiency when KSM
unmerges an address range.
- The 22 patch series "mm/damon/tests: fix memory bugs in kunit tests"
from SeongJae Park fixes leaks and unhandled malloc() failures in DAMON
userspace unit tests.
- The 2 patch series "some cleanups for pageout()" from Baolin Wang
cleans up a couple of minor things in the page scanner's
writeback-for-eviction code.
- The 2 patch series "mm/hugetlb: refactor sysfs/sysctl interfaces" from
Hui Zhu moves hugetlb's sysfs/sysctl handling code into a new file.
- The 9 patch series "introduce VM_MAYBE_GUARD and make it sticky" from
Lorenzo Stoakes makes the VMA guard regions available in /proc/pid/smaps
and improves the mergeability of guarded VMAs.
- The 2 patch series "mm: perform guard region install/remove under VMA
lock" from Lorenzo Stoakes reduces mmap lock contention for callers
performing VMA guard region operations.
- The 2 patch series "vma_start_write_killable" from Matthew Wilcox
starts work in permitting applications to be killed when they are
waiting on a read_lock on the VMA lock.
- The 11 patch series "mm/damon/tests: add more tests for online
parameters commit" from SeongJae Park adds additional userspace testing
of DAMON's "commit" feature.
- The 9 patch series "mm/damon: misc cleanups" from SeongJae Park does
that.
- The 2 patch series "make VM_SOFTDIRTY a sticky VMA flag" from Lorenzo
Stoakes addresses the possible loss of a VMA's VM_SOFTDIRTY flag when
that VMA is merged with another.
- The 16 patch series "mm: support device-private THP" from Balbir Singh
introduces support for Transparent Huge Page (THP) migration in zone
device-private memory.
- The 3 patch series "Optimize folio split in memory failure" from Zi
Yan optimizes folio split operations in the memory failure code.
- The 2 patch series "mm/huge_memory: Define split_type and consolidate
split support checks" from Wei Yang provides some more cleanups in the
folio splitting code.
- The 16 patch series "mm: remove is_swap_[pte, pmd]() + non-swap
entries, introduce leaf entries" from Lorenzo Stoakes cleans up our
handling of pagetable leaf entries by introducing the concept of
'software leaf entries', of type softleaf_t.
- The 4 patch series "reparent the THP split queue" from Muchun Song
reparents the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory resources.
- The 3 patch series "unify PMD scan results and remove redundant
cleanup" from Wei Yang does a little cleanup in the hugepage collapse
code.
- The 6 patch series "zram: introduce writeback bio batching" from
Sergey Senozhatsky improves zram writeback efficiency by introducing
batched bio writeback support.
- The 4 patch series "memcg: cleanup the memcg stats interfaces" from
Shakeel Butt cleans up our handling of the interrupt safety of some
memcg stats.
- The 4 patch series "make vmalloc gfp flags usage more apparent" from
Vishal Moola cleans up vmalloc's handling of incoming GFP flags.
- The 6 patch series "mm: Add soft-dirty and uffd-wp support for RISC-V"
from Chunyan Zhang teches soft dirty and userfaultfd write protect
tracking to use RISC-V's Svrsw60t59b extension.
- The 5 patch series "mm: swap: small fixes and comment cleanups" from
Youngjun Park fixes a small bug and cleans up some of the swap code.
- The 4 patch series "initial work on making VMA flags a bitmap" from
Lorenzo Stoakes starts work on converting the vma struct's flags to a
bitmap, so we stop running out of them, especially on 32-bit.
- The 2 patch series "mm/swapfile: fix and cleanup swap list iterations"
from Youngjun Park addresses a possible bug in the swap discard code and
cleans things up a little.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTEb0wAKCRDdBJ7gKXxA
jjfIAP94W4EkCCwNOupnChoG+YWw/JW21anXt5NN+i5svn1yugEAwzvv6A+cAFng
o+ug/fyrfPZG7PLp2R8WFyGIP0YoBA4=
=IUzS
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
- Parse SMBIOS tables in memory directly on Macbooks that do not
implement the EFI SMBIOS protocol
- Obtain EDID information from the primary display while running in the
EFI stub, and expose it via bootparams on x86 (generic method is in
the works, and will likely land during the next cycle)
- Bring CPER handling for ARM systems up to data with the latest EFI
spec changes.
- Various cosmetic changes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaS6z+QAKCRAwbglWLn0t
XCs8AQCL2Ebzq/FzMB0DEzcqwp9GV6upRReqBIrZcFQuZ+8IcQD/V+N4u3h1m1nJ
ofl4KQckZTPPV+iwDDUb7scn5fwgpA4=
=2tk+
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"The usual trickle of EFI contributions:
- Parse SMBIOS tables in memory directly on Macbooks that do not
implement the EFI SMBIOS protocol
- Obtain EDID information from the primary display while running in
the EFI stub, and expose it via bootparams on x86 (generic method
is in the works, and will likely land during the next cycle)
- Bring CPER handling for ARM systems up to data with the latest EFI
spec changes
- Various cosmetic changes"
* tag 'efi-next-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
docs: efi: add CPER functions to driver-api
efi/cper: align ARM CPER type with UEFI 2.9A/2.10 specs
efi/cper: Add a new helper function to print bitmasks
efi/cper: Adjust infopfx size to accept an extra space
RAS: Report all ARM processor CPER information to userspace
efi/libstub: x86: Store EDID in boot_params
efi/libstub: gop: Add support for reading EDID
efi/libstub: gop: Initialize screen_info in helper function
efi/libstub: gop: Find GOP handle instead of GOP data
efi: Fix trailing whitespace in header file
efi/memattr: Convert efi_memattr_init() return type to void
efi: stmm: fix kernel-doc "bad line" warnings
efi/riscv: Remove the useless failure return message print
efistub/x86: Add fallback for SMBIOS record lookup
DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma, brcm,sr-thermal,
amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions Owl SPS, Marvell
AP80x System Controller, Marvell CP110 System Controller,
cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data() helpers
and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the code
to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e. in
a parent node) on nodes without an interrupt. This matches the spec
description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI
-----BEGIN PGP SIGNATURE-----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=ZM/+
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there aren't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API clean works, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes.
-----BEGIN PGP SIGNATURE-----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=1JUI
-----END PGP SIGNATURE-----
Merge tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support for
NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections
-----BEGIN PGP SIGNATURE-----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=4Sb6
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
transitions (5-level to 4-level, the use case being kexec) so that
only the physical address in CR3 is picked up and not flags which are
above the physical mask shift
- Clean up and unify __phys_addr_symbol() definitions
-----BEGIN PGP SIGNATURE-----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=+p5z
-----END PGP SIGNATURE-----
Merge tag 'x86_mm_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Borislav Petkov:
- Use the proper accessors when reading CR3 as part of the page level
transitions (5-level to 4-level, the use case being kexec) so that
only the physical address in CR3 is picked up and not flags which are
above the physical mask shift
- Clean up and unify __phys_addr_symbol() definitions
* tag 'x86_mm_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: Fix page table access in 5-level to 4-level paging transition
x86/boot: Fix page table access in 5-level to 4-level paging transition
x86/mm: Unify __phys_addr_symbol()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZAAKCRCRxhvAZXjc
onGCAQDEHKNEuZMhkyd3K5YsJtMzZlW/uXp4+Wddeob+5yQp0wEA09xN4CJNMwhP
J6Kjaa80hWfrFacqSvyMUwQHHw6mngs=
=5Mom
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Cheaper MAY_EXEC handling for path lookup. This elides MAY_WRITE
permission checks during path lookup and adds the
IOP_FASTPERM_MAY_EXEC flag so filesystems like btrfs can avoid
expensive permission work.
- Hide dentry_cache behind runtime const machinery.
- Add German Maglione as virtiofs co-maintainer.
Cleanups:
- Tidy up and inline step_into() and walk_component() for improved
code generation.
- Re-enable IOCB_NOWAIT writes to files. This refactors file
timestamp update logic, fixing a layering bypass in btrfs when
updating timestamps on device files and improving FMODE_NOCMTIME
handling in VFS now that nfsd started using it.
- Path lookup optimizations extracting slowpaths into dedicated
routines and adding branch prediction hints for mntput_no_expire(),
fd_install(), lookup_slow(), and various other hot paths.
- Enable clang's -fms-extensions flag, requiring a JFS rename to
avoid conflicts.
- Remove spurious exports in fs/file_attr.c.
- Stop duplicating union pipe_index declaration. This depends on the
shared kbuild branch that brings in -fms-extensions support which
is merged into this branch.
- Use MD5 library instead of crypto_shash in ecryptfs.
- Use largest_zero_folio() in iomap_dio_zero().
- Replace simple_strtol/strtoul with kstrtoint/kstrtouint in init and
initrd code.
- Various typo fixes.
Fixes:
- Fix emergency sync for btrfs. Btrfs requires an explicit sync_fs()
call with wait == 1 to commit super blocks. The emergency sync path
never passed this, leaving btrfs data uncommitted during emergency
sync.
- Use local kmap in watch_queue's post_one_notification().
- Add hint prints in sb_set_blocksize() for LBS dependency on THP"
* tag 'vfs-6.19-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
MAINTAINERS: add German Maglione as virtiofs co-maintainer
fs: inline step_into() and walk_component()
fs: tidy up step_into() & friends before inlining
orangefs: use inode_update_timestamps directly
btrfs: fix the comment on btrfs_update_time
btrfs: use vfs_utimes to update file timestamps
fs: export vfs_utimes
fs: lift the FMODE_NOCMTIME check into file_update_time_flags
fs: refactor file timestamp update logic
include/linux/fs.h: trivial fix: regualr -> regular
fs/splice.c: trivial fix: pipes -> pipe's
fs: mark lookup_slow() as noinline
fs: add predicts based on nd->depth
fs: move mntput_no_expire() slowpath into a dedicated routine
fs: remove spurious exports in fs/file_attr.c
watch_queue: Use local kmap in post_one_notification()
fs: touch up predicts in path lookup
fs: move fd_install() slowpath into a dedicated routine and provide commentary
fs: hide dentry_cache behind runtime const machinery
fs: touch predicts in do_dentry_open()
...
Add test cases for the client not providing a pointer to a
struct cs_dsp_client_ops. This proves that it is safe for the client
to leave the client_ops pointer at NULL if it does not need to
implement any of the callbacks.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251128102132.1575177-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A client of cs_dsp does not necessarily need to implement any of the
optional callbacks in struct cs_dsp_client_ops, so allow the client_ops
pointer to be NULL.
This has been done by pointing client_ops at a default empty
cs_dsp_client_ops. It keeps the code cleaner by avoiding having to add
double nested NULL checks everywhere one of these callbacks is called.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251128102132.1575177-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use kvzalloc() instead of kzalloc() to allocate memory to cache the
content of a firmware control.
Most firmware controls are only small, typically a few bytes. But on
some firmware there can be much larger controls for coefficient or
model data.
The overhead of kvzalloc() is negligible because most control allocs
can be satisfied by the normal kmalloc() that kvzalloc() will try first.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127103947.1094934-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In cs_dsp_debugfs_read_controls_show() take the pwr_lock mutex
around the list walk. This protects against debugfs returning
a partial set of new controls if those controls are being added
to the list while it is being walked.
Controls are never deleted from this list, and are only added to
the end of the list. So there was never a danger of following a
stale pointer to garbage.
The worst case was that the printed list is truncated if it saw an
entry that was the list end just before a new entry was appended to
the list.
With the original code, the truncated list from the debugfs could
show only _some_ of the new entries. This could be confusing because
it appears that some new entries are missing.
Adding the mutex means that the debugfs read provides an atomic view.
Either it shows the old content before any of the new controls were
added; or it shows the new content after all the new controls are
added.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127113238.1251352-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace open-coded getting root OF node and matching against it with
new of_machine_device_match() helper.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251112-b4-of-match-matchine-data-v2-6-d46b72003fd6@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Now that cs_dsp uses regmap_raw_write() instead of regmap_raw_write_async()
it doesn't need to keep multiple DMA-safe buffers of every chunk of data
it wrote.
See commit fe08b7d508 ("firmware: cs_dsp: Remove async regmap writes")
Only one write can be in progress at a time, so one DMA-safe buffer can be
re-used. The single DMA-safe buffer is reallocated if the next write chunk
is larger. Reallocation size is rounded up to reduce the amount of churn.
PAGE_SIZE is used as a convenient size multiple. Typically for .wmfw files
the first chunk is the largest.
A DMA-safe intermediate buffer is used because we can't assume that the
bus underlying regmap can accept non-DMA-safe buffers.
Note that a chunk from the firmware file cannot simply be split into
arbitrarily-sized chunks to avoid buffer reallocation. The data in the
firmware file is preformatted to be written directly to the device as one
block. It already takes account of alignment, write-bursts and write
length requirements of the target hardware, so that the cs_dsp driver can
treat it as an opaque blob.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251126131501.884188-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The architectures supported by this driver have a maximum of 32-bits
of address, so we don't need more than 32-bits to store the length of
control data. Change the length in struct cs_dsp_coeff_ctl to an
unsigned int instead of a size_t. Also make a corresponding trivial
change to wm_adsp.c to prevent a compiler warning.
Tested on x86_64 builds this saves at least 4 bytes per control
(another 4 bytes might be saved if the compiler was inserting padding
to align the size_t).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251124171536.78962-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stephen Rothwell reports htmldocs warnings when merging char-misc tree:
WARNING: drivers/firmware/stratix10-svc.c:58 This comment starts with '/**',
but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Total number of transaction IDs, which is a combination of
WARNING: drivers/firmware/stratix10-svc.c:302 This comment starts with '/**',
but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* svc_mem_lock protects access to the svc_data_mem list for
Fixes: bcb9f4f070 ("firmware: stratix10-svc: Add support for async communication")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251114153347.16001109@canb.auug.org.au/
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20251114185815.358423-2-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two kernel-doc like descriptions at cper, which is used
by other parts of cper and on ghes driver. They both have kernel-doc
like descriptions.
Change the tags for them to be actual kernel-doc tags and add them
to the driver-api documentaion at the UEFI section.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Up to UEFI spec 2.9, the type byte of CPER struct for ARM processor
was defined simply as:
Type at byte offset 4:
- Cache error
- TLB Error
- Bus Error
- Micro-architectural Error
All other values are reserved
Yet, there was no information about how this would be encoded.
Spec 2.9A errata corrected it by defining:
- Bit 1 - Cache Error
- Bit 2 - TLB Error
- Bit 3 - Bus Error
- Bit 4 - Micro-architectural Error
All other values are reserved
That actually aligns with the values already defined on older
versions at N.2.4.1. Generic Processor Error Section.
Spec 2.10 also preserve the same encoding as 2.9A.
Adjust CPER and GHES handling code for both generic and ARM
processors to properly handle UEFI 2.9A and 2.10 encoding.
Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-information
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Compiling with W=1 with werror enabled produces an error:
drivers/firmware/efi/cper-arm.c: In function ‘cper_print_proc_arm’:
drivers/firmware/efi/cper-arm.c:298:64: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
298 | snprintf(infopfx, sizeof(infopfx), "%s ", newpfx);
| ^
drivers/firmware/efi/cper-arm.c:298:25: note: ‘snprintf’ output between 2 and 65 bytes into a destination of size 64
298 | snprintf(infopfx, sizeof(infopfx), "%s ", newpfx);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As the logic there adds an space at the end of infopx buffer.
Add an extra space to avoid such warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Append the terminating \n to the string during the debugfs file
read instead of creating a string that already has a trailing \n.
This avoids the ugly behaviour of having to include a trailing \n
in the filenames stored to wmfw_file_name and bin_file_name in
struct cs_dsp.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120130640.1169780-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs_dsp_debugfs_wmfw_read() and cs_dsp_debugfs_bin_read() were identical
except for which struct member they printed. Move all this duplicated
code into a common function cs_dsp_debugfs_string_read().
The check for dsp->booted has been removed because this is redundant.
The two strings are set when the DSP is booted and cleared when the
DSP is powered-down.
Access to the string char * must be protected by the pwr_lock mutex. The
string is passed into cs_dsp_debugfs_string_read() as a pointer to the
char * so that the mutex lock can also be factored out into
cs_dsp_debugfs_string_read().
wmfw_file_name and bin_file_name members of struct cs_dsp have been
changed to const char *. It makes for a better API to pass a const
pointer into cs_dsp_debugfs_string_read().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120130640.1169780-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Retrieve the GOP device's EDID information in the kernel's boot
parameters. Makes the data avaialble to kernel graphics code and
drives, such as efidrm.
With efidrm, the EDID is now also available to user-space compositors
via standard DRM interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add support for EFI_EDID_DISCOVERED_PROTOCOL and EFI_EDID_ACTIVE_PROTOCOL
as defined in UEFI 2.8, sec 12.9. Define GUIDs and data structures in the
rsp header files.
In the GOP setup function, read the EDID of the primary GOP device. First
try EFI_EDID_ACTIVE_PROTOCOL, which supports user-specified EDID data. Or
else try EFI_EDID_DISCOVERED_PROTOCOL, which returns the display device's
native EDID. If no EDID could be retrieved, clear the storage.
Rename efi_setup_gop() to efi_setup_graphics() to reflect the changes
Let callers pass an optional instance of struct edid_data, if they are
interested.
While screen_info and edid_info come from the same device handle, they
should be considered indendent data. The former refers to the graphics
mode, the latter refers to the display device. GOP devices might not
provide both.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move initialization of screen_info into a single helper function.
Frees up space in the main setup helper for adding EDID support.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The device handle of the GOP device is required to retrieve the
correct EDID data. Find the handle instead of the GOP data. Still
return the GOP data in the function arguments, as we already looked
it up.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
For now, including <asm/pgalloc.h> instead of <linux/pgalloc.h> is
technically fine unless the .c file calls p*d_populate_kernel() helper
functions.
But it is a better practice to always include <linux/pgalloc.h>. Include
<linux/pgalloc.h> instead of <asm/pgalloc.h> outside arch/.
Link: https://lkml.kernel.org/r/20251024113047.119058-3-harry.yoo@oracle.com
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Add support for voltage and temperature sensor
- Add a mutex to memory operations on Stratix10 service driver
- Add support for asynchronous communications in the service driver
- Replace scnprintf() with sysfs_emit()
-----BEGIN PGP SIGNATURE-----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=/N3t
-----END PGP SIGNATURE-----
Merge tag 'socfpga_firmware_updates_for_v6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into char-misc-next
Dinh writes:
SoCFPGA firmware updates for v6.19
- Add support for voltage and temperature sensor
- Add a mutex to memory operations on Stratix10 service driver
- Add support for asynchronous communications in the service driver
- Replace scnprintf() with sysfs_emit()
* tag 'socfpga_firmware_updates_for_v6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
firmware: stratix10-rsu: replace scnprintf() with sysfs_emit() in *_show() functions
firmware: stratix10-rsu: Migrate RSU driver to use stratix10 asynchronous framework.
firmware: stratix10-svc: Add support for RSU commands in asynchronous framework
firmware: stratix10-svc: Add support for async communication
firmware: stratix10-svc: Add mutex in stratix10 memory management
firmware: stratix10-svc: Add definition for voltage and temperature sensor
Add support for Partial-IO poweroff. In Partial-IO pins of a few
hardware units can generate system wakeups while DDR memory is not
powered resulting in a fresh boot of the system. These hardware units in
the SoC are always powered so that some logic can detect pin activity.
If the system supports Partial-IO as described in the fw capabilities, a
sys_off handler is added. This sys_off handler decides if the poweroff
is executed by entering normal poweroff or Partial-IO instead. The
decision is made by checking if wakeup is enabled on all devices that
may wake up the SoC from Partial-IO.
The possible wakeup devices are found by checking which devices
reference a "Partial-IO" system state in the list of wakeup-source
system states. Only devices that are actually enabled by the user will
be considered as an active wakeup source. If none of the wakeup sources
is enabled the system will do a normal poweroff. If at least one wakeup
source is enabled it will instead send a TI_SCI_MSG_PREPARE_SLEEP
message from the sys_off handler. Sending this message will result in an
immediate shutdown of the system. No execution is expected after this
point. The code will wait for 5s and do an emergency_restart afterwards
if Partial-IO wasn't entered at that point.
A short documentation about Partial-IO can be found in section 6.2.4.5
of the TRM at
https://www.ti.com/lit/pdf/spruiv7
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Link: https://patch.msgid.link/20251103-topic-am62-partialio-v6-12-b4-v10-2-0557e858d747@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Check the header flags if an response is expected or not. If it is not
expected skip the receive part of ti_sci_do_xfer(). This prepares the
driver for one-way messages as prepare_sleep for Partial-IO.
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Link: https://patch.msgid.link/20251103-topic-am62-partialio-v6-12-b4-v10-1-0557e858d747@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Replace scnprintf() with sysfs_emit() in sysfs *_show() functions
in stratix10-rsu.c to follow the kernel's guidelines from
Documentation/filesystems/sysfs.rst.
This improves consistency, safety, and makes the code easier to
maintain and update in the future.
Signed-off-by: Rahul Kumar <rk0006818@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* Add support for asynchronous communication to the RSU client channel.
* Migrate functions that communicate with the SDM to use the asynchronous
framework.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Integrate Remote System Update(RSU) service commands into the
asynchronous framework for communicating with SDM. This allows the RSU
commands to be processed asynchronously, improving the responsiveness
of the Stratix10 service channel.
The asynchronous framework now supports the following RSU commands:
* COMMAND_RSU_GET_SPT_TABLE
* COMMAND_RSU_STATUS
* COMMAND_RSU_NOTIFY
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Introduce support for asynchronous communication with the Stratix10
service channel. Define new structures to enable asynchronous messaging
with the Secure Device Manager (SDM). Add and remove asynchronous
support for existing channels. Implement initialization and cleanup
routines for the asynchronous framework. Enable sending and polling of
messages to the SDM asynchronously.
The new public functions added are:
- stratix10_svc_add_async_client: Adds a client to the service channel.
- stratix10_svc_remove_async_client: Removes an asynchronous client from
the service channel.
- stratix10_svc_async_send: Sends an asynchronous message to the SDM
mailbox in EL3 secure firmware.
- stratix10_svc_async_poll: Polls the status of an asynchronous service
request in EL3 secure firmware.
- stratix10_svc_async_done: Marks an asynchronous transaction as
complete and frees up the resources.
These changes enhance the functionality of the Stratix10 service channel
by allowing for more efficient and flexible communication with the
firmware.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add mutex lock to stratix10_svc_allocate_memory and
stratix10_svc_free_memory for thread safety. This prevents race
conditions and ensures proper synchronization during memory operations.
This is required for parallel communication with the Stratix10 service
channel.
Fixes: 7ca5ce8965 ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add entry in Stratix 10 Service Layer to support temperature and voltage
sensor.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The EFI runtime wrappers use a file local semaphore to serialize access
to the EFI runtime services. This means that any calls to the arch
wrappers around the runtime services will also be serialized, removing
the need for redundant locking.
For robustness, add a facility that allows those arch wrappers to assert
that the semaphore was taken by the current task.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The efi_memattr_init() function's return values (0 and -ENOMEM) are never
checked by callers. Convert the function to return void since the return
status is unused.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add a beginning " *" to each line to avoid kernel-doc warnings:
Warning: drivers/firmware/efi/stmm/mm_communication.h:34 bad line:
Warning: drivers/firmware/efi/stmm/mm_communication.h:113 bad line:
Warning: drivers/firmware/efi/stmm/mm_communication.h:130 bad line:
Fixes: c44b6be62e ("efi: Add tee-based EFI variable driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In the efi_create_mapping() in arch/riscv/kernel/efi.c,
the return value is always 0, and this debug message
is unnecessary. So, remove it.
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaQzbRwAKCRAdayaRccAa
ls8lAP9Dj1mOl+KTtajMvDnDTym4Sso9CaFP+5maFAv9CflAIwEA5QEtSwI9sMcH
ty8x9Y6TTuib+ns37i2jxR8cIt4jHwU=
=WA6M
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaRGyjgAKCRCRxhvAZXjc
okJ7AQDFRmoidpqHmRlvZQ3aismKkNHfx2k67QtRlX+YxDi8rQEAmmKyKUiX/SZV
39TroGfiJ5ytQuXwz3QxG/34cA+kAgQ=
=HqhX
-----END PGP SIGNATURE-----
Merge patch "kbuild: Add '-fms-extensions' to areas with dedicated CFLAGS"
Nathan Chancellor <nathan@kernel.org> says:
Shared branch between Kbuild and other trees for enabling
'-fms-extensions' for 6.19.
* tag 'kbuild-ms-extensions-6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Add '-fms-extensions' to areas with dedicated CFLAGS
Kbuild: enable -fms-extensions
jfs: Rename _inline to avoid conflict with clang's '-fms-extensions'
Link: https://patch.msgid.link/20251101-kbuild-ms-extensions-dedicated-cflags-v1-1-38004aba524b@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Some Apple EFI firmwares do not provide the SMBIOS Protocol,
causing efi_get_smbios_record() to fail. This prevents retrieval of
system information such as product name, which is needed by
apple_set_os() to enable the integrated GPU on dual-graphics Intel
MacBooks.
Add a fallback that directly parses the SMBIOS entry point table when
the protocol is unavailable.
Signed-off-by: Francesco Pompo <francescopompo2@gmail.com>
[ardb: cosmetic tweaks]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When transitioning from 5-level to 4-level paging, the existing code
incorrectly accesses page table entries by directly dereferencing CR3 and
applying PAGE_MASK. This approach has several issues:
- __native_read_cr3() returns the raw CR3 register value, which on x86_64
includes not just the physical address but also flags Bits above the
physical address width of the system (i.e. above __PHYSICAL_MASK_SHIFT) are
also not masked.
- The pgd value is masked by PAGE_SIZE which doesn't take into account the
higher bits such as _PAGE_BIT_NOPTISHADOW.
Replace this with proper accessor functions:
- native_read_cr3_pa(): Uses CR3_ADDR_MASK to additionally mask metadata out
of CR3 (like SME or LAM bits). All remaining bits are real address bits or
reserved and must be 0.
- mask pgd value with PTE_PFN_MASK instead of PAGE_MASK, accounting for flags
above bit 51 (_PAGE_BIT_NOPTISHADOW in particular). Bits below 51, but above
the max physical address are reserved and must be 0.
Fixes: cb1c9e02b0 ("x86/efistub: Perform 4/5 level paging switch from the stub")
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Reported-by: Tobias Fleig <tfleig@meta.com>
Co-developed-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20251103141002.2280812-3-usamaarif642@gmail.com
Prevent calling ti_sci_cmd_set_io_isolation() on firmware
that does not support the IO_ISOLATION capability. Add the
MSG_FLAG_CAPS_IO_ISOLATION capability flag and check it before
attempting to set IO isolation during suspend/resume operations.
Without this check, systems with older firmware may experience
undefined behavior or errors when entering/exiting suspend states.
Fixes: ec24643bdd ("firmware: ti_sci: Add system suspend and resume call")
Signed-off-by: Thomas Richard (TI.com) <thomas.richard@bootlin.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patch.msgid.link/20251031-ti-sci-io-isolation-v2-1-60d826b65949@bootlin.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They
both are of the same data and overrides each other. This resulted in the
rmmod of the svc driver to fail and throw a kernel panic for kthread_stop
and fifo free.
Fixes: b5dc75c915 ("firmware: stratix10-svc: extend svc to support new RSU features")
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Ang Tien Sung <tiensung.ang@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
This is a follow up to commit c4781dc3d1 ("Kbuild: enable
-fms-extensions") but in a separate change due to being substantially
different from the initial submission.
There are many places within the kernel that use their own CFLAGS
instead of the main KBUILD_CFLAGS, meaning code written with the main
kernel's use of '-fms-extensions' in mind that may be tangentially
included in these areas will result in "error: declaration does not
declare anything" messages from the compiler.
Add '-fms-extensions' to all these areas to ensure consistency, along
with -Wno-microsoft-anon-tag to silence clang's warning about use of the
extension that the kernel cares about using. parisc does not build with
clang so it does not need this warning flag. LoongArch does not need it
either because -W flags from KBUILD_FLAGS are pulled into cflags-vdso.
Reported-by: Christian Brauner <brauner@kernel.org>
Closes: https://lore.kernel.org/20251030-meerjungfrau-getrocknet-7b46eacc215d@brauner/
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Add support for a generic ioctl read/write interface using which users
can request firmware to perform read/write operations on a protected and
secure address space.
The functionality is introduced through the means of two new IOCTL IDs
which extend the existing PM_IOCTL EEMI API:
- IOCTL_READ_REG
- IOCTL_MASK_WRITE_REG
The caller only passes the node id of the given device and an offset.
The base address is not exposed to the caller and internally retrieved
by the firmware. Firmware will enforce an access policy on the incoming
read/write request.
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-3-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In normal case, there is no need to invoke mutex_destroy in error path,
but it is useful when CONFIG_DEBUG_MUTEXES, so use devm_mutex_init().
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SCU driver is critical for system working properly, it should
never be removed and binded again. So suppress the bind attrs
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
IMX_SC_ERR_NOTFOUND should map with -ENOENT, not -EEXIST. -ENODEV makes
more sense for IMX_SC_ERR_NOPOWER, and -ECOMM makes more sense for
IMX_SC_ERR_IPC.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since its introduction, this symbol has not been used by any loadable
modules. It remains only referenced within imx-scu.c, which is always built
together with imx-scu-irq.c
As such, exporting imx_scu_enable_general_irq_channel is unnecessary, so
remove the export.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
mu_resource_id is referenced in imx_scu_irq_get_status() and
imx_scu_irq_group_enable() which could be used by other modules, so
need to set correct value before using imx_sc_irq_ipc_handle in
SCU API call.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With mailbox channel requested, there is possibility that interrupts may
come in, so need to make sure the workqueue is initialized before
the queue is scheduled by mailbox rx callback.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The IRQ mailbox is an optional channel and does not need to be kept until
driver removal when an error occurs. Free the allocated memory in the
error path.
Add 'goto free_cl' when mbox_request_channel_byname() fails, to keep free
at one place.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx_scu_enable_general_irq_channel() calls of_parse_phandle_with_args(),
but does not release the OF node reference. Add a of_node_put() call
to release the reference.
Fixes: 851826c756 ("firmware: imx: enable imx scu general irq function")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This series contains a set of small, focused fixes that address
robustness and lifecycle issues in the Arm SCMI core and debug support,
ensuring safer handling of debug initialization failures, correct flag
management in raw mode, and consistent inflight counter tracking.
Brief summary:
- Fix raw xfer flag clearing
- Skip RAW debug initialization on failure
- Make inflight counter helpers null-safe, preventing crashes if debug
initialization fails
- Account for failed debug initialization globally
There is no functional change for standard SCMI operation, but these
fixes improve stability in debug and raw modes, particularly in error
paths.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmjvtCIACgkQAEG6vDF+
4phtFw//em6TYEkBTgJVq94ULfLcuzOVRwH+WmhK1VaXKz0jLlzrN6sVEiJnwQA3
p9gDIJ+TjXozgVZzBa5eZIfeP/BmbPSPtsSGDlvhQl5smT4r/CG7fS17VhFNGx/o
6DYP8X44Fx3qGuDe3tJiuw9F7IaXmDE03uslD7a9MdtPR2K1KwfD/Y6fXmZbx36B
M67E48dyWQymE0gDnYupQtUe7+JENDHYXuLySMfAEjk7+Fjis/u5aFXH2aCWAM5P
PV1VVAq4f8QEs2sI3Lwd45cJsYBu4dEpKTTWEpBc1vASkdFhUIXJ9FUKVvNunwi1
yW038FsyRsmnc+4Aq7Aj0hAJsyaFEogHMS6zqoTX/0QGjKPdrHgS+CkBNk7OTDyo
WlBAi4HbInIzYDC8tbo1hiXBvcZzZnPvbFCEpi521W1bJN79hhflC09mNg5uRI+T
obkmVMjlYq4vH+kY56cfVTVoejG38T3S5UYp97NmmP4/ilxpJ7oeoSLO3vC2IE7F
GN9mOqHpbwdpN4zN259bepBkrRbySUlPi9MB+HvdBJZqxEbedkuOPtBQUiYA2Opf
Xcg1WcHEdImrMyjJkYPk92MtWaHpTDZ6WlKe00oK7YJS+qpNaO5uOTvtbtOZsMwW
MBvrdxBBcmZpZiosjMQPNXHMi/P8UeswLBrjqjzznUnwteOLyUE=
=2mq1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=12z8
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.18
This series contains a set of small, focused fixes that address
robustness and lifecycle issues in the Arm SCMI core and debug support,
ensuring safer handling of debug initialization failures, correct flag
management in raw mode, and consistent inflight counter tracking.
Brief summary:
- Fix raw xfer flag clearing
- Skip RAW debug initialization on failure
- Make inflight counter helpers null-safe, preventing crashes if debug
initialization fails
- Account for failed debug initialization globally
There is no functional change for standard SCMI operation, but these
fixes improve stability in debug and raw modes, particularly in error
paths.
* tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Register by hand a platform device for the ACPM clocks.
The ACPM clocks are not modeled as a DT child of ACPM because:
1/ they don't have their own resources.
2/ they are not a block that can be reused. The clock identifying
data is reduced (clock ID, clock name and mailbox channel ID)
and may differ from a SoC to another.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-3-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add ACPM DVFS protocol handler. It constructs DVFS messages that
the APM firmware can understand.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-2-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The SCMI_XFER_FLAG_IS_RAW flag was being cleared prematurely in
scmi_xfer_raw_put() before the transfer completion was properly
acknowledged by the raw message handlers.
Move the clearing of SCMI_XFER_FLAG_IS_RAW and SCMI_XFER_FLAG_CHAN_SET
from scmi_xfer_raw_put() to __scmi_xfer_put() to ensure the flags remain
set throughout the entire raw message processing pipeline until the
transfer is returned to the free pool.
Fixes: 3095a3e25d ("firmware: arm_scmi: Add xfer helpers to provide raw access")
Suggested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251008091057.1969260-1-a.shimko.dev@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Avoid attempting to initialize RAW mode when the debug subsystem itself
has failed to initialize, since doing so is pointless and emits
misleading error messages.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251014115346.2391418-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a check to the scmi_inflight_count() helper to handle the case
when the SCMI debug subsystem fails to initialize.
Fixes: f8e656382b ("include: trace: Add tracepoint support for inflight xfer count")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251014115346.2391418-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When the SCMI debug subsystem fails to initialize, the related debug root
will be missing, and the underlying descriptor will be NULL.
Handle this fault condition in the SCMI debug helpers that maintain
metrics counters.
Fixes: 0b3d48c472 ("firmware: arm_scmi: Track basic SCMI communication debug metrics")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20251014115346.2391418-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FF-A v1.2 introduced 16 byte IMPLEMENTATION DEFINED value in the endpoint
memory access descriptor to allow any sender could to specify an its any
custom value for each receiver. Also this value must be specified by the
receiver when retrieving the memory region. The sender must ensure it
informs the receiver of this value via an IMPLEMENTATION DEFINED mechanism
such as a partition message.
So the FF-A driver can use the message interfaces to communicate the value
and set the same in the ffa_mem_region_attributes structures when using
the memory interfaces.
The driver ensure that the size of the endpoint memory access descriptors
is set correctly based on the FF-A version.
Fixes: 9fac08d9d9 ("firmware: arm_ffa: Upgrade FF-A version to v1.2 in the driver")
Reported-by: Lixiang Mao <liximao@qti.qualcomm.com>
Tested-by: Lixiang Mao <liximao@qti.qualcomm.com>
Message-Id: <20250923150927.1218364-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
- Document what OVMF stands for
- Clear NX restrictions also from 'more reliable' type memory when
using the DXE service API
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaOK6UgAKCRAwbglWLn0t
XCQHAP9P7+AoxhNxCi0P6OkCZ+jEIKfa8OvojWhKxY8JxbYbegEA95GfwcUi+8Qf
RJRe6+HHVffdibu6L4pi+YCqp4hhcg8=
=XxQi
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Document what OVMF stands for (Open Virtual Machine Firmware)
- Clear NX restrictions also from 'more reliable' type memory when
using the DXE service API
* tag 'efi-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/x86: Memory protection on EfiGcdMemoryTypeMoreReliable
efi: Explain OVMF acronym in OVMF_DEBUG_LOG help text
- The 3 patch series "ida: Remove the ida_simple_xxx() API" from
Christophe Jaillet completes the removal of this legacy IDR API.
- The 9 patch series "panic: introduce panic status function family"
from Jinchao Wang provides a number of cleanups to the panic code and
its various helpers, which were rather ad-hoc and scattered all over the
place.
- The 5 patch series "tools/delaytop: implement real-time keyboard
interaction support" from Fan Yu adds a few nice user-facing usability
changes to the delaytop monitoring tool.
- The 3 patch series "efi: Fix EFI boot with kexec handover (KHO)" from
Evangelos Petrongonas fixes a panic which was happening with the
combination of EFI and KHO.
- The 2 patch series "Squashfs: performance improvement and a sanity
check" from Phillip Lougher teaches squashfs's lseek() about
SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen
microbenchmark.
- Plus another 50-odd singleton patches all over the place.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN78zwAKCRDdBJ7gKXxA
jhLeAQCddTv0XtSUTrvBvmrJVUBrQQeJc+LtNopMIjfAF/WAWAEAogSVKxg+HHEB
GaVixx4zDriNzEqrqiCx9rm4l+YooQA=
=XRe0
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet
completes the removal of this legacy IDR API
- "panic: introduce panic status function family" from Jinchao Wang
provides a number of cleanups to the panic code and its various
helpers, which were rather ad-hoc and scattered all over the place
- "tools/delaytop: implement real-time keyboard interaction support"
from Fan Yu adds a few nice user-facing usability changes to the
delaytop monitoring tool
- "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos
Petrongonas fixes a panic which was happening with the combination of
EFI and KHO
- "Squashfs: performance improvement and a sanity check" from Phillip
Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere
150x speedup was measured for a well-chosen microbenchmark
- plus another 50-odd singleton patches all over the place
* tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits)
Squashfs: reject negative file sizes in squashfs_read_inode()
kallsyms: use kmalloc_array() instead of kmalloc()
MAINTAINERS: update Sibi Sankar's email address
Squashfs: add SEEK_DATA/SEEK_HOLE support
Squashfs: add additional inode sanity checking
lib/genalloc: fix device leak in of_gen_pool_get()
panic: remove CONFIG_PANIC_ON_OOPS_VALUE
ocfs2: fix double free in user_cluster_connect()
checkpatch: suppress strscpy warnings for userspace tools
cramfs: fix incorrect physical page address calculation
kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit
Squashfs: fix uninit-value in squashfs_get_parent
kho: only fill kimage if KHO is finalized
ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name()
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock
coccinelle: platform_no_drv_owner: handle also built-in drivers
coccinelle: of_table: handle SPI device ID tables
lib/decompress: use designated initializers for struct compress_format
efi: support booting with kexec handover (KHO)
...
Lots of platform specific updates for Qualcomm SoCs, including a
new TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with the
M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed, Broadcom,
Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0.
-----BEGIN PGP SIGNATURE-----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=mcZR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
of an AMD platform like the security processor (ASP) firmware, modules
etc, for example. The intent being that these updates are interim,
live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor generating
unexpected interrupts and injecting them into such guest, thus
interfering with its operation in an unexpected and negative manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory. The problem
was that the toolchain-generated version of the code was being
executed from a different mapping of memory than what was "assumed"
during code generation, needing an ever-growing pile of fixups for
absolute memory references which are invalid in the early, 1:1 memory
mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this:
https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com
- The usual cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=shVa
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV and apic updates from Borislav Petkov:
- Add functionality to provide runtime firmware updates for the non-x86
parts of an AMD platform like the security processor (ASP) firmware,
modules etc, for example. The intent being that these updates are
interim, live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor
generating unexpected interrupts and injecting them into such guest,
thus interfering with its operation in an unexpected and negative
manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory.
The problem was that the toolchain-generated version of the code was
being executed from a different mapping of memory than what was
"assumed" during code generation, needing an ever-growing pile of
fixups for absolute memory references which are invalid in the early,
1:1 memory mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this [1]
- The usual cleanups and fixes
Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1]
* tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
x86/boot: Drop erroneous __init annotation from early_set_pages_state()
crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver
crypto: ccp - Add new HV-Fixed page allocation/free API
x86/sev: Add new dump_rmp parameter to snp_leak_pages() API
x86/startup/sev: Document the CPUID flow in the boot #VC handler
objtool: Ignore __pi___cfi_ prefixed symbols
x86/sev: Zap snp_abort()
x86/apic/savic: Do not use snp_abort()
x86/boot: Get rid of the .head.text section
x86/boot: Move startup code out of __head section
efistub/x86: Remap inittext read-execute when needed
x86/boot: Create a confined code area for startup code
x86/kbuild: Incorporate boot/startup/ via Kbuild makefile
x86/boot: Revert "Reject absolute references in .head.text"
x86/boot: Check startup code for absence of absolute relocations
objtool: Add action to check for absence of absolute relocations
x86/sev: Export startup routines for later use
x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object
x86/sev: Provide PIC aliases for SEV related data objects
x86/boot: Provide PIC aliases for 5-level paging related constants
...
Check for needed memory protection changes on EFI DXE GCD memory space
descriptors with type EfiGcdMemoryTypeMoreReliable in addition to
EfiGcdMemoryTypeSystemMemory.
This fixes a fault on entry into the decompressed kernel from the
EFI stub that occurs when the memory allocated for the decompressed
kernel is more reliable memory, has NX/XP set, and the kernel needs
to use the EFI DXE protocol to adjust memory protections.
The memory descriptors returned by the DXE protocol
GetMemorySpaceDescriptor() service use a different GCD memory type
to distinguish more reliable memory ranges from their conventional
counterparts. This is in contrast to the EFI memory descriptors
returned by the EFI GetMemoryMap() service which use the
EFI_MEMORY_MORE_RELIABLE memory attributes flag to identify
EFI_CONVENTIONAL_MEMORY type regions that have this additional
property.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
There are a few minor code fixes for tegra firmware, i.MX firmware and the
eyeq reset controller, and a MAINTAINERS update as Alyssa Rosenzweig moves
on to non-kernel projects. The other changes are all for devicetree files:
- Multiple Marvell Armada SoCs need changes to fix PCIe, audio and SATA
- A socfpga board fails to probe the ethernet phy
- The two temperature sensors on i.MX8MP are swapped
- Allwinner devicetree files cause build-time warnings
- Two Rockchip based boards need corrections for headphone detection
and SPI flash
-----BEGIN PGP SIGNATURE-----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=bxeQ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are a few minor code fixes for tegra firmware, i.MX firmware
and the eyeq reset controller, and a MAINTAINERS update as Alyssa
Rosenzweig moves on to non-kernel projects.
The other changes are all for devicetree files:
- Multiple Marvell Armada SoCs need changes to fix PCIe, audio and
SATA
- A socfpga board fails to probe the ethernet phy
- The two temperature sensors on i.MX8MP are swapped
- Allwinner devicetree files cause build-time warnings
- Two Rockchip based boards need corrections for headphone detection
and SPI flash"
* tag 'soc-fixes-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: remove Alyssa Rosenzweig
firmware: tegra: Do not warn on missing memory-region property
arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
arm64: dts: marvell: cn913x-solidrun: fix sata ports status
ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
arm64: dts: imx8mp: Correct thermal sensor index
ARM: imx: Kconfig: Adjust select after renamed config option
firmware: imx: Add stub functions for SCMI CPU API
firmware: imx: Add stub functions for SCMI LMM API
firmware: imx: Add stub functions for SCMI MISC API
riscv: dts: allwinner: rename devterm i2c-gpio node to comply with binding
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5
arm64: dts: rockchip: Add vcc supply for SPI Flash on NanoPC-T6
ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address
reset: eyeq: fix OF node leak
ARM64: dts: mcbin: fix SATA ports on Macchiatobin
ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370
ARM: dts: allwinner: Minor whitespace cleanup
Introduce support for loading firmware into the QUP serial engines from
Linux, which allows deferring selection of which protocol (uart, i2c,
spi, etc) a given SE should have until the OS loads.
Also introduce the "object invoke" interface in the SCM driver, to
provide interface to the Qualcomm TEE driver.
-----BEGIN PGP SIGNATURE-----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=TulG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=JuVO
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm device driver updates for v6.18
Introduce support for loading firmware into the QUP serial engines from
Linux, which allows deferring selection of which protocol (uart, i2c,
spi, etc) a given SE should have until the OS loads.
Also introduce the "object invoke" interface in the SCM driver, to
provide interface to the Qualcomm TEE driver.
* tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
firmware: qcom: scm: add support for object invocation
firmware: qcom: tzmem: export shm_bridge create/delete
Link: https://lore.kernel.org/r/20250921020225.595403-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The IPC shared memory can reside in system memory or SRAM. In the latter
case the memory-region property is expected not to be present, so do not
warn about it.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Fixes: dbe4efea38 ("firmware: tegra: bpmp: Use of_reserved_mem_region_to_resource() for "memory-region"")
Signed-off-by: Thierry Reding <treding@nvidia.com>
These SCMI changes bring a mix of improvements, fixes, and cleanups:
1. Device Tree bindings - allow multiple SCMI instances by suffixing
node names (Nikunj Kela).
2. Code hardening - constify both scmi_{transport,voltage_proto}_ops
so they reside in read-only memory (Christophe JAILLET).
3. VirtIO transport initialization - set DRIVER_OK before SCMI probing
to prevent potential stalls; while recent rework removes the practical
risk, this ensures correctness (Junnan Wu).
4. Quirk handling - fix a critical bug by preventing writes to string
constants, avoiding faults in read-only memory (Johan Hovold).
5. i.MX SCMI MISC protocol - extend support to discover board info,
retrieve configuration and build data, and document the new
MISC_BOARD_INFO command; all handled gracefully if unsupported (Peng Fan).
6. Logging cleanup - simplify device tree node name logging by using
the %pOF format to print full paths (Krzysztof Kozlowski).
-----BEGIN PGP SIGNATURE-----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=Pkr7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PkTj
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates/fixes for v6.18
These SCMI changes bring a mix of improvements, fixes, and cleanups:
1. Device Tree bindings - allow multiple SCMI instances by suffixing
node names (Nikunj Kela).
2. Code hardening - constify both scmi_{transport,voltage_proto}_ops
so they reside in read-only memory (Christophe JAILLET).
3. VirtIO transport initialization - set DRIVER_OK before SCMI probing
to prevent potential stalls; while recent rework removes the practical
risk, this ensures correctness (Junnan Wu).
4. Quirk handling - fix a critical bug by preventing writes to string
constants, avoiding faults in read-only memory (Johan Hovold).
5. i.MX SCMI MISC protocol - extend support to discover board info,
retrieve configuration and build data, and document the new
MISC_BOARD_INFO command; all handled gracefully if unsupported (Peng Fan).
6. Logging cleanup - simplify device tree node name logging by using
the %pOF format to print full paths (Krzysztof Kozlowski).
* tag 'scmi-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Simplify printks with pOF format
firmware: arm_scmi: imx: Discover MISC board info from the system manager
firmware: arm_scmi: imx: Support retrieving MISC protocol configuration info
firmware: arm_scmi: imx: Discover MISC build info from the system manager
firmware: arm_scmi: imx: Add documentation for MISC_BOARD_INFO
firmware: arm_scmi: quirk: Prevent writes to string constants
firmware: arm_scmi: Fix function name typo in scmi_perf_proto_ops struct
firmware: arm_scmi: Mark VirtIO ready before registering scmi_virtio_driver
firmware: arm_scmi: Constify struct scmi_transport_ops
firmware: arm_scmi: Constify struct scmi_voltage_proto_ops
dt-bindings: firmware: arm,scmi: Allow multiple instances
Link: https://lore.kernel.org/r/20250915101341.2987516-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Google GS101:
Enable CPU Idle, which needs programming C2 idle hints
via ACPM firmware (Alive Clock and Power Manager). The patch
introducing this depends on 'local-timer-stop' Devicetree property,
which was merged in v6.17.
Fix handling error codes in ACPM firmware driver when talking to
PMIC.
2. Exynos2200: Add dedicated compatible for serial engines (USI).
-----BEGIN PGP SIGNATURE-----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=pOwr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4h/m
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.18
1. Google GS101:
Enable CPU Idle, which needs programming C2 idle hints
via ACPM firmware (Alive Clock and Power Manager). The patch
introducing this depends on 'local-timer-stop' Devicetree property,
which was merged in v6.17.
Fix handling error codes in ACPM firmware driver when talking to
PMIC.
2. Exynos2200: Add dedicated compatible for serial engines (USI).
* tag 'samsung-drivers-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: fix PMIC returned errno
dt-bindings: soc: samsung: usi: add samsung,exynos2200-usi compatible
soc: samsung: exynos-pmu: Enable CPU Idle for gs101
Link: https://lore.kernel.org/r/20250912135448.203678-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allowlist the uefisec application, to provide UEFI variable access on
Dell Inspiron 7441 and Latitude 7455, the Hamoa EVK, and the Lenovo
Thinkbook 16.
Disable tzmem on the SC7180 platform, as this causes problems with
rmtfs.
Clean up unused, lingering, parameters in the MDT loader API.
Unconditinally clear TCS trigger bit, to avoid false completion IRQs in
the RPMh/RSC driver. Fix endianess issue in SMEM driver.
Add pd-mapper support for SM8750.
-----BEGIN PGP SIGNATURE-----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=CIAf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=y2UQ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.18
Allowlist the uefisec application, to provide UEFI variable access on
Dell Inspiron 7441 and Latitude 7455, the Hamoa EVK, and the Lenovo
Thinkbook 16.
Disable tzmem on the SC7180 platform, as this causes problems with
rmtfs.
Clean up unused, lingering, parameters in the MDT loader API.
Unconditinally clear TCS trigger bit, to avoid false completion IRQs in
the RPMh/RSC driver. Fix endianess issue in SMEM driver.
Add pd-mapper support for SM8750.
* tag 'qcom-drivers-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: tzmem: disable sc7180 platform
soc: qcom: use devm_kcalloc() for array space allocation
dt-bindings: firmware: qcom,scm: Add MSM8937
firmware: qcom: scm: Allow QSEECOM on Dell Inspiron 7441 / Latitude 7455
firmware: qcom: scm: Allow QSEECOM on Lenovo Thinkbook 16
soc: qcom: rpmh-rsc: Unconditionally clear _TRIGGER bit for TCS
soc: qcom: pd-mapper: Add SM8750 compatible
soc: qcom: icc-bwmon: Fix handling dev_pm_opp_find_bw_*() errors
soc: remove unneeded 'fast_io' parameter in regmap_config
soc: qcom: smem: Fix endian-unaware access of num_entries
dt-bindings: soc: qcom,rpmh-rsc: Remove double colon from description
dt-bindings: sram: qcom,imem: Document IPQ5424 compatible
firmware: qcom: scm: Allow QSEECOM on HAMOA-IOT-EVK
soc: qcom: mdt_loader: Remove unused parameter
soc: qcom: mdt_loader: Remove pas id parameter
soc: qcom: mdt_loader: Remove unused parameter
firmware: qcom: scm: preserve assign_mem() error return value
Link: https://lore.kernel.org/r/20250911215017.3020481-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Andrea adds the missing MIPI DSI clock defines for the RP1 and then
continues to implement the remaining clocks for the RP1 chip (ADC,
I2S, Audio in/out, DMA, MIPI, PWM, SDIO, UART, encoder)
- Akhilesh fixes a spelling typo in the bcm47xx_sprom driver
- Brian converts the RP1 clock driver to use the new determine_rate()
API
-----BEGIN PGP SIGNATURE-----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=qQ7G
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5iR8
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.18/drivers' of https://github.com/Broadcom/stblinux into soc/drivers
This pull request contains Broadcom SoC drivers updates for 6.18:
- Andrea adds the missing MIPI DSI clock defines for the RP1 and then
continues to implement the remaining clocks for the RP1 chip (ADC,
I2S, Audio in/out, DMA, MIPI, PWM, SDIO, UART, encoder)
- Akhilesh fixes a spelling typo in the bcm47xx_sprom driver
- Brian converts the RP1 clock driver to use the new determine_rate()
API
* tag 'arm-soc/for-6.18/drivers' of https://github.com/Broadcom/stblinux:
clk: rp1: convert from round_rate() to determine_rate()
drivers: firmware: bcm47xx_sprom: fix spelling
clk: rp1: Implement remaining clock tree
dt-bindings: clock: rp1: Add missing MIPI DSI defines
Link: https://lore.kernel.org/r/20250910171910.666401-4-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm TEE (QTEE) hosts Trusted Applications (TAs) and services in
the secure world, accessed via objects. A QTEE client can invoke these
objects to request services. Similarly, QTEE can request services from
the nonsecure world using objects exported to the secure world.
Add low-level primitives to facilitate the invocation of objects hosted
in QTEE, as well as those hosted in the nonsecure world.
If support for object invocation is available, the qcom_scm allocates
a dedicated child platform device. The driver for this device communicates
with QTEE using low-level primitives.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-2-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Anyone with access to contiguous physical memory should be able to
share memory with QTEE using shm_bridge.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Reviewed-by: Kuldeep Singh <quic_kuldsing@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-1-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When KHO (Kexec HandOver) is enabled, it sets up scratch memory regions
early during device tree scanning. After kexec, the new kernel
exclusively uses this region for memory allocations during boot up to the
initialization of the page allocator
However, when booting with EFI, EFI's reserve_regions() uses
memblock_remove(0, PHYS_ADDR_MAX) to clear all memory regions before
rebuilding them from EFI data. This destroys KHO scratch regions and
their flags, thus causing a kernel panic, as there are no scratch memory
regions.
Instead of wholesale removal, iterate through memory regions and only
remove non-KHO ones. This preserves KHO scratch regions, which are good
known memory, while still allowing EFI to rebuild its memory map.
Link: https://lkml.kernel.org/r/b34da9fd50c89644cd4204136cfa6f5533445c56.1755721529.git.epetron@amazon.de
Signed-off-by: Evangelos Petrongonas <epetron@amazon.de>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Print full device node name with %pOF format, so the code will be a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20250912092423.162497-2-krzysztof.kozlowski@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When SHM bridge is enabled, assigning RMTFS memory causes the calling
core to hang if the system is running in EL1.
Disable SHM bridge on sc7180 devices to avoid that hang.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-sc7180-shm-hang-v1-1-99ad9ffeb5b4@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
ACPM PMIC command handlers returned a u8 value when they should
have returned either zero or negative error codes.
Translate the APM PMIC errno to linux errno.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-input/aElHlTApXj-W_o1r@stanley.mountain/
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Enabling compile testing should not enable every individual driver (we
have "allyesconfig" for that).
Fixes: 4a434abc40 ("firmware: meson-sm: enable build as module")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250725075429.10056-1-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The i.MX SCMI MISC protocol can report board information from the
System Manager (SM), including a board name and board-specific
attributes. Query this during protocol initialization.
If the firmware does not implement BOARD_INFO, handle -EOPNOTSUPP
gracefully and continue.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250904-sm-misc-api-v1-v4-4-0bf10eaabdf1@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The MISC protocol can provide System Manager (SM) configuration
information, including platform identifiers and board-specific
attributes. Add support to retrieve this information during protocol
initialization.
If the firmware does not implement the CFG_INFO command, handle
-EOPNOTSUPP gracefully and continue without failing init.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250904-sm-misc-api-v1-v4-3-0bf10eaabdf1@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
MISC protocol can report System Manager (SM) build information (commit,
build date/time, etc.). Discover those information at the init time.
If the firmware doesn't support it, ignore -EOPNOTSUPP.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250904-sm-misc-api-v1-v4-2-0bf10eaabdf1@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
System Manager Firmware supports getting board information, add
documentation for this MISC_BOARD_INFO command.
Also extends the SYSLOG response to include NOT_SUPPORTED.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250904-sm-misc-api-v1-v4-1-0bf10eaabdf1@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make sure to drop the reference to the secure monitor device taken by
of_find_device_by_node() when looking up its driver data on behalf of
other drivers (e.g. during probe).
Note that holding a reference to the platform device does not prevent
its driver data from going away so there is no point in keeping the
reference after the helper returns.
Fixes: 8cde3c2153 ("firmware: meson_sm: Rework driver as a proper platform driver")
Cc: stable@vger.kernel.org # 5.5
Cc: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250725074019.8765-1-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Recent EFI x86 systems are more strict when it comes to mapping boot
images, and require that mappings are either read-write or read-execute.
Now that the boot code is being cleaned up and refactored, most of it is
being moved into .init.text [where it arguably belongs] but that implies
that when booting on such strict EFI firmware, we need to take care to
map .init.text (and the .altinstr_aux section that follows it)
read-execute as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-44-ardb+git@google.com
The quirk version range is typically a string constant and must not be
modified (e.g. as it may be stored in read-only memory). Attempting
to do so can trigger faults such as:
| Unable to handle kernel write to read-only memory at virtual
| address ffffc036d998a947
Update the range parsing so that it operates on a copy of the version
range string, and mark all the quirk strings as const to reduce the
risk of introducing similar future issues.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220437
Fixes: 487c407d57 ("firmware: arm_scmi: Add common framework to handle firmware quirks")
Cc: stable@vger.kernel.org # 6.16
Cc: Cristian Marussi <cristian.marussi@arm.com>
Reported-by: Jan Palus <jpalus@fastmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Message-Id: <20250829132152.28218-1-johan@kernel.org>
[sudeep.holla: minor commit message rewording; switch to cleanup helpers]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
People not very intimate with EFI may not know the meaning of the OVMF
acronym. Write it in full, to help users with making good decisions
when configuring their kernels.
Fixes: f393a76176 ("efi: add ovmf debug log driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Currently, the family code and subfamily code are derived from the
PMC_TAP_IDCODE register. Versal, Versal NET share the same family
code. Also some platforms share the same subfamily code, making it
difficult to distinguish between platforms. Update
zynqmp_pm_get_family_info() to use IDs derived from the compatible
string instead of silicon ID codes derived from PMC_TAP_IDCODE register.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20250701123851.1314531-4-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The family code is currently derived from the PMC_TAP_IDCODE register
value, but there are issues where Versal, Versal NET, and future
platforms share the same family code. Additionally for some platforms
have identical subfamily code, making it challenging to differentiate
between platforms based on the family and subfamily codes. To resolve
this, a new family code member is added to the platform data, initialized
with unique values. This change enables better platform distinction via
the compatible string.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20250701123851.1314531-3-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Introduce a compatible string for the Versal NET platform which enables
platform identification based on the compatible property for platform
specific configurations.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20250701123851.1314531-2-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add new debug interface to support PM_GET_NODE_STATUS to get the node
information like requirements and usage.
The debugfs firmware driver interface is only meant for testing and
debugging EEMI APIs. Hence, it is by-default disabled in production
systems.
Signed-off-by: Madhav Bhatt <madhav.bhatt@amd.com>
Link: https://lore.kernel.org/r/20250417094543.3873507-1-madhav.bhatt@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The API documenation of setup_mm_hdr does not mention that dptr can be
NULL, this is a local function, and no caller passes NULL. So drop the
unneeded check.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
No caller ever evaluates what we return in 'ret'. They only use the
return code of the function.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When we are low on memory or when the internal API is violated, we
cannot return EFI_OUT_OF_RESOURCES. According to the UEFI standard, that
error code is either related to persistent storage used for the variable
or even not foreseen as possible error (GetVariable e.g.). Use the not
fully accurate but compliant error code EFI_DEVICE_ERROR in those cases.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The communication buffer allocated by setup_mm_hdr() is later on passed
to tee_shm_register_kernel_buf(). The latter expects those buffers to be
contiguous pages, but setup_mm_hdr() just uses kmalloc(). That can cause
various corruptions or BUGs, specifically since commit 9aec2fb0fd
("slab: allocate frozen pages"), though it was broken before as well.
Fix this by using alloc_pages_exact() instead of kmalloc().
Fixes: c44b6be62e ("efi: Add tee-based EFI variable driver")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The PM co-processor (device manager or DM) adds the ability to abort
entry to a low power mode by clearing the mode selection in the
latest version of its firmware (11.01.09) [1].
Enable the ti_sci driver to support the LPM abort call which clears the
low power mode selection of the DM. This fixes an issue where failed
system suspend attempts would cause subsequent suspends to fail.
After system suspend completes, regardless of if system suspend succeeds
or fails, the ->complete() hook in TI SCI will be called. In the
->complete() hook, a message will be sent to the DM to clear the current
low power mode selection. Clearing the low power mode selection
unconditionally will not cause any error in the DM.
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html
Signed-off-by: Kendall Willis <k-willis@ti.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250819195453.1094520-1-k-willis@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
After commit 20bda12a0e (“firmware: arm_scmi: Make VirtIO transport a
standalone driver”), the VirtIO transport probes independently. During
scmi_virtio_probe, scmi_probe() is called, which intune invokes
scmi_protocol_acquire() that sends a message over the virtqueue and
waits for a reply.
Previously, DRIVER_OK was only set after scmi_vio_probe, in the core
virtio via virtio_dev_probe(). According to the Virtio spec (3.1 Device
Initialization):
| The driver MUST NOT send any buffer available notifications to the
| device before setting DRIVER_OK.
Some type-1 hypervisors block available-buffer notifications until the
driver is marked OK. In such cases, scmi_vio_probe stalls in
scmi_wait_for_reply(), and the probe never completes.
Resolve this by setting DRIVER_OK immediately after the device-specific
setup, so scmi_probe() can safely send notifications.
Note after splitting the transports into modules, the probe sequence
changed a bit. We can no longer rely on virtio_device_ready() being
called by the core in virtio_dev_probe(), because scmi_vio_probe()
doesn’t complete until the core SCMI stack runs scmi_probe(), which
immediately issues the initial BASE protocol exchanges.
Fixes: 20bda12a0e ("firmware: arm_scmi: Make VirtIO transport a standalone driver")
Signed-off-by: Junnan Wu <junnan01.wu@samsung.com>
Message-Id: <20250812075343.3201365-1-junnan01.wu@samsung.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Mark struct scmi_transport_ops as const since this driver never modifies
it. Constifying moves it to read-only memory, improving hardening -
especially important for structures with function pointers.
x86_64 (allmodconfig) size diff:
Before:
text data bss dec hex filename
6907 680 48 7635 1dd3 drivers/firmware/arm_scmi/transports/optee.o
After:
text data bss dec hex filename
6987 576 48 7611 1dbb drivers/firmware/arm_scmi/transports/optee.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <881be6ad61037ed95d5e750a2565fd9840120a08.1753816459.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Constify struct scmi_voltage_proto_ops since the driver never modifies
it. Placing it in read-only memory (.rodata) improves hardening,
particularly because it contains function pointers.
x86_64 (allmodconfig) size impact:
Before:
text data bss dec hex filename
13142 1808 0 14950 3a66 drivers/firmware/arm_scmi/voltage.o
After:
text data bss dec hex filename
13238 1712 0 14950 3a66 drivers/firmware/arm_scmi/voltage.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <2091660c072dd2d5599897243a5d69e89d46ed4d.1753816459.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When qcom_scm_assign_mem() fails, the error value is currently being
overwritten after it is logged, resulting in the loss of the original
error code. Fix this by retaining and returning the original error value
as intended.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250807124451.2623019-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Expose the OVMF firmware debug log via sysfs
- Lower the default log level for the EFI stub to avoid corrupting any
splash screens with unimportant diagnostic output
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaJbnoAAKCRAwbglWLn0t
XIhuAQDB+qEzM0nBPRVnlztrjKDbxu01jzFgCuf4egFePs4OjwD/dgNCXXudn5JB
X7VWNi8VQAWBMhijpEKXvDu6f0MXFgw=
=UeGX
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Expose the OVMF firmware debug log via sysfs
- Lower the default log level for the EFI stub to avoid corrupting any
splash screens with unimportant diagnostic output
* tag 'efi-next-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: add API doc entry for ovmf_debug_log
efistub: Lower default log level
efi: add ovmf debug log driver
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts between
clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on hardware
with FEAT_BBM (break-before-make) level 2 and no TLB conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call
-----BEGIN PGP SIGNATURE-----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=5h1C
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"A quick summary: perf support for Branch Record Buffer Extensions
(BRBE), typical PMU hardware updates, small additions to MTE for
store-only tag checking and exposing non-address bits to signal
handlers, HAVE_LIVEPATCH enabled on arm64, VMAP_STACK forced on.
There is also a TLBI optimisation on hardware that does not require
break-before-make when changing the user PTEs between contiguous and
non-contiguous.
More details:
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts
between clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on
hardware with FEAT_BBM (break-before-make) level 2 and no TLB
conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR
table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64/gcs: task_gcs_el0_enable() should use passed task
arm64: Kconfig: Keep selects somewhat alphabetically ordered
arm64: signal: Remove ISB when resetting POR_EL0
kselftest/arm64: Handle attempts to disable SM on SME only systems
kselftest/arm64: Fix SVE write data generation for SME only systems
kselftest/arm64: Test SME on SME only systems in fp-ptrace
kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
kselftest/arm64: Allow sve-ptrace to run on SME only systems
arm64/mm: Drop redundant addr increment in set_huge_pte_at()
kselftest/arm4: Provide local defines for AT_HWCAP3
arm64: Mark kernel as tainted on SAE and SError panic
arm64/gcs: Don't call gcs_free() when releasing task_struct
drivers/perf: hisi: Support PMUs with no interrupt
drivers/perf: hisi: Relax the event number check of v2 PMUs
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
drivers/perf: hisi: Simplify the probe process for each DDRC version
perf/arm-ni: Support sharing IRQs within an NI instance
perf/arm-ni: Consolidate CPU affinity handling
...
- Implement support for embedding EFI SBAT data (Secure Boot
Advanced Targeting: a secure boot image revocation facility)
on x86. (Vitaly Kuznetsov)
- Move the efi_enter_virtual_mode() initialization call
from the generic init code to x86 init code.
(Alexander Shishkin)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmiIcO4RHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1iduRAAuZbTETuyGa7xtTjR42zDfyarM+04azck
OL/+k9XFNjlDcDFm9mtGjmyTIrbo8J8e0IVmP7+qAYGh9YzSPzNblVjHfeAwo6Da
1cndxlybuXL3iNC7aI3HzhneBvoESMKDXHWvHxFsrQAy1CdyX/TAB6dgtciTijgG
wYZlEXaI74D4yr8LxmlFOQSCAGKSkmgCadJiw+rLIYcTP+dXonMquIpuO2RHRsCM
Ff3dKU2iM6L3XlYtf/msYZWVhVebGKl5W5JKWa+VO1z7LntdGYQkavkMbRJBI0dv
WW6g4YvDHcwJvRptZWBeGTKMSCD6mHKTw+sMOAME78YskBotx1bqMpSlW96CBka4
qqqfVeTn7vi377Na7Ud5nBQ1riP2zPYlNEgSsWmW3XfBOs4ps01gdBorypWm3Co8
9FC/IFfdoJ9c6Gp/pQzf+8CRGKW64Gp4/wdm1OIMt2HPj15fQtRFrcqjP7/STKKJ
OjkZC8MmLHZYxW8okrV8oSCl5A19wCxeHK9Gk5vsyoJ4Ed4+TH25wZef2EdJrQ8y
t1R7LUNxqc3dfRQsaV84ME/c+fte9T1DtX3u1AYSyGNQFFAmxYHPCF+Yls1kwfzu
kvY+D495Jwimx3RVELbCc/8R7zzhdLMRUEu94tGqE2Aq/5V1kq66aJRszsG8OtMr
B6oCSStDE48=
=8/CV
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Implement support for embedding EFI SBAT data (Secure Boot Advanced
Targeting: a secure boot image revocation facility) on x86 (Vitaly
Kuznetsov)
- Move the efi_enter_virtual_mode() initialization call from the
generic init code to x86 init code (Alexander Shishkin)
* tag 'x86-boot-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Implement support for embedding SBAT data for x86
x86/efi: Move runtime service initialization to arch/x86
- DEBUGFS
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
- SYSFS
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
- Support cache-ids for device-tree systems
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
- Rust
- Device
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
- Misc
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaIjkhwAKCRBFlHeO1qrK
LpXuAP9RWwfD9ZGgQZ9OsMk/0pZ2mDclaK97jcmI9TAeSxeZMgD1FHnOMTY7oSIi
iG7Muq0yLD+A5gk9HUnMUnFNrngWCg==
=jgRj
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
- Leave powered-on genpds on until ->sync_state() or late_initcall_sync
- Export a common ->sync_state() helper for genpd providers
- Add generic ->sync_state() support
- Add a bus/driver for genpd provider-devices
- Introduce dev_pm_genpd_is_on() for consumers
pmdomain providers:
- cpuidle-psci: Drop redundant ->sync_state() support
- cpuidle-riscv-sbi: Drop redundant ->sync_state() support
- imx: Set ISI panic write for imx8m-blk-ctrl
- qcom: Add support for Glymur and Milos RPMh power-domains
- qcom: Use of_genpd_sync_state() for power-domains
- rockchip: Add support for the RK3528 variant
- samsung: Fix splash-screen handover by enforcing a ->sync_state()
- sunxi: Add support for Allwinner A523's PCK600 power-controller
- tegra: Opt-out from genpd's common ->sync_state() support for pmc
- thead: Instantiate a GPU power sequencer via the auxiliary bus
- renesas: Move init to postcore_initcalls
- xilinx: Move ->sync_state() support to firmware driver
- xilinx: Use of_genpd_sync_state() for power-domains
pmdomain consumers:
- remoteproc: imx_rproc: Fixup the detect/attach procedure for pre-booted cores
-----BEGIN PGP SIGNATURE-----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=9SL+
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Leave powered-on genpds on until ->sync_state() or late_initcall_sync
- Export a common ->sync_state() helper for genpd providers
- Add generic ->sync_state() support
- Add a bus/driver for genpd provider-devices
- Introduce dev_pm_genpd_is_on() for consumers
pmdomain providers:
- cpuidle-psci: Drop redundant ->sync_state() support
- cpuidle-riscv-sbi: Drop redundant ->sync_state() support
- imx: Set ISI panic write for imx8m-blk-ctrl
- qcom: Add support for Glymur and Milos RPMh power-domains
- qcom: Use of_genpd_sync_state() for power-domains
- rockchip: Add support for the RK3528 variant
- samsung: Fix splash-screen handover by enforcing a ->sync_state()
- sunxi: Add support for Allwinner A523's PCK600 power-controller
- tegra: Opt-out from genpd's common ->sync_state() support for pmc
- thead: Instantiate a GPU power sequencer via the auxiliary bus
- renesas: Move init to postcore_initcalls
- xilinx: Move ->sync_state() support to firmware driver
- xilinx: Use of_genpd_sync_state() for power-domains
pmdomain consumers:
- remoteproc: imx_rproc: Fixup the detect/attach procedure for
pre-booted cores"
* tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (44 commits)
pmdomain: qcom: rpmhpd: Add Glymur RPMh Power Domains
dt-bindings: power: rpmpd: Add Glymur power domains
remoteproc: imx_rproc: detect and attach to pre-booted remote cores
remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
pmdomain: core: introduce dev_pm_genpd_is_on()
pmdomain: ti: Select PM_GENERIC_DOMAINS
pmdomain: sunxi: sun20i-ppu: change to tristate and enable for ARCH_SUNXI
pmdomain: sunxi: add driver for Allwinner A523's PCK-600 power controller
pmdomain: sunxi: sun20i-ppu: add A523 support
pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state
cpuidle: riscv-sbi: Drop redundant sync_state support
cpuidle: psci: Drop redundant sync_state support
pmdomain: core: Leave powered-on genpds on until sync_state
pmdomain: core: Leave powered-on genpds on until late_initcall_sync
pmdomain: core: Default to use of_genpd_sync_state() for genpd providers
driver core: Add dev_set_drv_sync_state()
pmdomain: core: Add common ->sync_state() support for genpd providers
driver core: Export get_dev_from_fwnode()
firmware: xilinx: Use of_genpd_sync_state()
firmware: xilinx: Don't share zynqmp_pm_init_finalize()
...
Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs,
and new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly,
the SoC specific firmware on Tegra and Qualcomm get minor enhancements
and chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes.
-----BEGIN PGP SIGNATURE-----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=7T40
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
This includes lots of file shuffling due to HD-audio code
reorganization and many trivial changes, but otherwise there shouldn't
be much surprise from the functionality POV. The PR includes the PM
changes as prerequisite, too. Some highlights below:
Core:
- Performance optimizations in PCM core code
- Refactoring of ASoC Kconfig menus to be hopefully more consistant
and easier to navigate.
- Refactoring of ASoC DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers
HD-audio reorganization:
- All code are moved under sound/hda with a bit more understandable
tree structure, as well as file renames
- The huge Realtek driver code is split to several parts, a common
helper module with driver modules per probe entry
- HDMI and Cirrus codec drivers also split
ASoC:
- Further work on the generic handling for SoundWire SDCA devices
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI
TAS5753
HD-audio and USB-audio:
- TAS2781 driver cleanup and TAS2770 support
- EQ enablement in CA0132 driver
- USB audio quirk code cleanups
Others:
- Cleanups of PM autosuspend call patterns with the update from the PM
tree
- Lots of strcpy() -> strscpy() conversions for fixed size arrays
-----BEGIN PGP SIGNATURE-----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=Wr97
-----END PGP SIGNATURE-----
Merge tag 'sound-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This includes lots of file shuffling due to HD-audio code
reorganization and many trivial changes, but otherwise there shouldn't
be much surprise from the functionality POV. The PR includes the PM
changes as prerequisite, too. Some highlights below:
Core:
- Performance optimizations in PCM core code
- Refactoring of ASoC Kconfig menus to be hopefully more consistant
and easier to navigate.
- Refactoring of ASoC DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers
HD-audio reorganization:
- All code are moved under sound/hda with a bit more understandable
tree structure, as well as file renames
- The huge Realtek driver code is split to several parts, a common
helper module with driver modules per probe entry
- HDMI and Cirrus codec drivers also split
ASoC:
- Further work on the generic handling for SoundWire SDCA devices
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI
TAS5753
HD-audio and USB-audio:
- TAS2781 driver cleanup and TAS2770 support
- EQ enablement in CA0132 driver
- USB audio quirk code cleanups
Others:
- Cleanups of PM autosuspend call patterns with the update from the
PM tree
- Lots of strcpy() -> strscpy() conversions for fixed size arrays"
* tag 'sound-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (385 commits)
ALSA: hda: Add TAS2770 support
ASoC: qcom: sm8250: Add Fairphone 4 soundcard compatible
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 4 sound card
ASoC: dt-bindings: qcom,q6afe: Document q6usb subnode
ASoC: SDCA: Fix implicit cast from le16
ASoC: SDCA: Shrink detected_mode_handler() stack frame
ASoC: SDCA: Check devm_mutex_init() return value
ASoC: SDCA: add route by the number of input pins in MU entity
ALSA: hda/realtek: Add support for ASUS Commercial laptops using CS35L41 HDA
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for PTL.
ASoC: codec: tlv320aic32x4: Fix reset GPIO check
ASoC: dt-bindings: qcom,lpass-va-macro: Define clock-names in top-level
ASoC: SDCA: Add hw_params() helper function
ASoC: SDCA: Add a helper to get the SoundWire port number
ASoC: SDCA: Add helper to add DAI constraints
ASoC: soc-dai: Add private data to snd_soc_dai
ASoC: SDCA: Move SDCA search functions and export
ASoC: SDCA: Remove overly chatty input pin list warning
ASoC: SDCA: Allow read-only controls to be deferrable
ASoC: SDCA: Update memory allocations to zero initialise
...
This PR has quite a few commits but nothing really that would be worth of
spending too much time for, or would want to emphasize in particular.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaIAmHQAKCRAaerohdGur
0pBVAP94mutr2EyDyvJWpzej0fWROHzL1EkJacuKxmabt7HnJgEA9H8Ug6OoAdKq
V1v+Z9iL1wrQ3Yfp28vHhdrAQUgDJgA=
=cjP7
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Quite a few commits but nothing really that would be worth of spending
too much time for, or would want to emphasize in particular"
* tag 'tpmdd-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb_ffa: handle tpm busy return code
tpm_crb_ffa: Remove memset usage
tpm_crb_ffa: Fix typos in function name
tpm: Check for completion after timeout
tpm: Use of_reserved_mem_region_to_resource() for "memory-region"
tpm: Replace scnprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show functions
tpm_crb_ffa: Remove unused export
tpm: tpm_crb_ffa: try to probe tpm_crb_ffa when it's built-in
firmware: arm_ffa: Change initcall level of ffa_init() to rootfs_initcall
tpm/tpm_svsm: support TPM_CHIP_FLAG_SYNC
tpm/tpm_ftpm_tee: support TPM_CHIP_FLAG_SYNC
tpm: support devices with synchronous send()
tpm: add bufsiz parameter in the .send callback
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIfUkgAKCRA2KwveOeQk
uypLAP92r6f47sWcOw/5B9aVffX6Bypsb7dqBJQpCNxI5U1xcAEAiCrZ98UJyOeQ
JQgnXd4N67K4EsS2JDc+FutRn3Yi+A8=
=+5Bq
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
Fix race condition during SCM driver initialization, in relation to
tzmem and waitqueue irq handling,
Make the rpmh RSC driver support version 4 of the IP block.
Add SM7635 family and related PMICs to the socinfo driver. Also add
support for retrieving the bootloader build details.
-----BEGIN PGP SIGNATURE-----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=tp6K
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmiD/PoACgkQmmx57+YA
GNmsIA/+O403SHj1P/nmTAubn18vJ4Y0IJfSBtjvW5icGvE4Ei3PkGS1Fq3JSpLw
SicjAUDeiKtoC2d1ZbrfiGIH2ixeBqhT205fOADVJrMFZ+iNffH6fQ80ApxRd4Br
i+HkDbn4m8QX3iwLE030YvpsWWSreKZQk8XFQJHLSkjcglL69dxaAWOmb11o2FEd
qGhkR6fU+kcZDSLavdSS9EzIseNgUoS4d6JXDi4q5diOk3VdtynwxGsVSzzSC2v3
Ed0GNlmD5M1z6pSdnlRmcay0Vj3iA7OnSn2sZKFBKB9af+zDxoyUk6GFFtWsyntM
bZX679BVeW8VpcypF5EIoBNV7tFmi2t3X7bElOlz46ydvcmyh5CEq5+mN8CGSO8V
A9cgqrg6FZMvfKjYPIaN6aX//+d7HHyM1xKuAOu7CiFq7yt+bmZBnEfGWOrMWp1R
1vDE7MulhumbWKGbi/ICj1ZNG9P9tOq5If9chXynIxv9hUlPa0a+USTL0AyyOGah
bs6eU0tZChsKhiU9sZfvDEgIgo+TVBtQBIFSMxyfdYUz4Aaf4FM8udf9YBXGj5Xx
0vyNAFk+X+MykAL53WJ41JAmRgp5GitiAFwYUEvRF7mI8WB39WUbAE4nMstqpL9B
E24hYg4p3vnaP5VoQ7idOZVWEfHIXJLq7qt4Y3D6wLHX66NmZic=
=3kNF
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.17
Fix race condition during SCM driver initialization, in relation to
tzmem and waitqueue irq handling,
Make the rpmh RSC driver support version 4 of the IP block.
Add SM7635 family and related PMICs to the socinfo driver. Also add
support for retrieving the bootloader build details.
* tag 'qcom-drivers-for-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
Link: https://lore.kernel.org/r/20250720030743.285440-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Linux IMA (Integrity Measurement Architecture) subsystem used for
secure boot, file integrity, or remote attestation cannot be a loadable
module for few reasons listed below:
o Boot-Time Integrity: IMA’s main role is to measure and appraise files
before they are used. This includes measuring critical system files during
early boot (e.g., init, init scripts, login binaries). If IMA were a
module, it would be loaded too late to cover those.
o TPM Dependency: IMA integrates tightly with the TPM to record
measurements into PCRs. The TPM must be initialized early (ideally before
init_ima()), which aligns with IMA being built-in.
o Security Model: IMA is part of a Trusted Computing Base (TCB). Making it
a module would weaken the security model, as a potentially compromised
system could delay or tamper with its initialization.
IMA must be built-in to ensure it starts measuring from the earliest
possible point in boot which inturn implies TPM must be initialised and
ready to use before IMA.
To enable integration of tpm_event_log with the IMA subsystem, the TPM
drivers (tpm_crb and tpm_crb_ffa) also needs to be built-in. However with
FF-A driver also being initialised at device initcall level, it can lead to
an initialization order issue where:
- crb_acpi_driver_init() may run before tpm_crb_ffa_driver()_init and
ffa_init()
- As a result, probing the TPM device via CRB over FFA is deferred
- ima_init() (called as a late initcall) runs before deferred probe
completes, IMA fails to find the TPM and logs the below error:
| ima: No TPM chip found, activating TPM-bypass!
Eventually it fails to generate boot_aggregate with PCR values.
Because of the above stated dependency, the ffa driver needs to initialised
before tpm_crb_ffa module to ensure IMA finds the TPM successfully when
present.
[ jarkko: reformatted some of the paragraphs because they were going past
the 75 character boundary. ]
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add Tegra264 support for the BPMP, fix some dependency issues and clean
up some code using new OF helpers.
-----BEGIN PGP SIGNATURE-----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=UtKj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QiXC
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.17-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Updates for v6.17-rc1
Add Tegra264 support for the BPMP, fix some dependency issues and clean
up some code using new OF helpers.
* tag 'tegra-for-6.17-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Fix build failure for tegra264-only config
firmware: tegra: bpmp: Use of_reserved_mem_region_to_resource() for "memory-region"
firmware: tegra: bpmp: Add support on Tegra264
firmware: tegra: Fix IVC dependency problems
Link: https://lore.kernel.org/r/20250711220943.2389322-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In preparation for adding Clang sanitizer coverage stack depth tracking
that can support stack depth callbacks:
- Add the new top-level CONFIG_KSTACK_ERASE option which will be
implemented either with the stackleak GCC plugin, or with the Clang
stack depth callback support.
- Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE,
but keep it for anything specific to the GCC plugin itself.
- Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named
for what it does rather than what it protects against), but leave as
many of the internals alone as possible to avoid even more churn.
While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS,
since that's the only place it is referenced from.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
1. A fix is introduced to correct turbo frequency marking for 64-bit
devices with sustained frequencies over 4GHz, ensuring accurate turbo
frequency identification.
2. Debug capabilities are being improved by introducing in-flight transfer
tracking using debug counters, which help diagnose transfer congestion
and behavior. Additional tracepoints are added to log in-flight counts
at transfer begin and end, offering better runtime insight. The debug
counters now support decrement operations using a newly added
scmi_dec_count helper, making counter tracking symmetric and more robust.
3. A race condition in suspend-resume logic is being resolved by ensuring
SCMI_SYSPOWER_IDLE state is set early during resume, improving suspend
reliability under certain conditions. New suspend and resume operations
are added to the scmi_bus_type to enable finer power management control
for SCMI-based devices.
4. Finally enhancements are also made to avoid registering notifiers for
events that a platform does not support, reducing unnecessary overhead
by checking for unsupported event types during protocolinitialization.
-----BEGIN PGP SIGNATURE-----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=9o+P
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yON3
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.17
1. A fix is introduced to correct turbo frequency marking for 64-bit
devices with sustained frequencies over 4GHz, ensuring accurate turbo
frequency identification.
2. Debug capabilities are being improved by introducing in-flight transfer
tracking using debug counters, which help diagnose transfer congestion
and behavior. Additional tracepoints are added to log in-flight counts
at transfer begin and end, offering better runtime insight. The debug
counters now support decrement operations using a newly added
scmi_dec_count helper, making counter tracking symmetric and more robust.
3. A race condition in suspend-resume logic is being resolved by ensuring
SCMI_SYSPOWER_IDLE state is set early during resume, improving suspend
reliability under certain conditions. New suspend and resume operations
are added to the scmi_bus_type to enable finer power management control
for SCMI-based devices.
4. Finally enhancements are also made to avoid registering notifiers for
events that a platform does not support, reducing unnecessary overhead
by checking for unsupported event types during protocolinitialization.
* tag 'scmi-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Convert to SYSTEM_SLEEP_PM_OPS
firmware: arm_scmi: Avoid notifier registration for unsupported events
firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume
firmware: arm_scmi: Add power management operations to SCMI bus
include: trace: Add tracepoint support for inflight xfer count
firmware: arm_scmi: Track number of inflight SCMI transfers
firmware: arm_scmi: Add support for debug counter decrement
firmware: arm_scmi: Fix up turbo frequencies selection
Link: https://lore.kernel.org/r/20250709122907.1171913-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There's a subtle race in the SCM driver: we assign the __scm pointer
before requesting the waitqueue interrupt. Assigning __scm marks the SCM
API as ready to accept calls. It's possible that a user makes a call
right after we set __scm and the firmware raises an interrupt before the
driver's ready to service it. Move the __scm assignment after we request
the interrupt.
This has the added benefit of allowing us to drop the goto label.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-4-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Now that qcom_scm_shm_bridge_enable() uses the struct device passed to
it as argument to make the QCOM_SCM_MP_SHM_BRIDGE_ENABLE SCM call, we
can move the TZMem initialization before the assignment of the __scm
pointer in the SCM driver (which marks SCM as ready to users) thus
fixing the potential race between consumer calls and the memory pool
initialization.
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/all/20250120151000.13870-1-johan+linaro@kernel.org/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-3-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
qcom_scm_shm_bridge_enable() is used early in the SCM initialization
routine. It makes an SCM call and so expects the internal __scm pointer
in the SCM driver to be assigned. For this reason the tzmem memory pool
is allocated *after* this pointer is assigned. However, this can lead to
a crash if another consumer of the SCM API makes a call using the memory
pool between the assignment of the __scm pointer and the initialization
of the tzmem memory pool.
As qcom_scm_shm_bridge_enable() is a special case, not meant to be
called by ordinary users, pull it into the local SCM header. Make it
take struct device as argument. This is the device that will be used to
make the SCM call as opposed to the global __scm pointer. This will
allow us to move the tzmem initialization *before* the __scm assignment
in the core SCM driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-2-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
qcom_scm_shm_bridge_create() and qcom_scm_shm_bridge_delete() take
struct device as argument but don't use it. Remove it from these
functions' prototypes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-1-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some uefi implementations will write the efistub logs to the display
over a splash image. This is not desirable for debug and info logs, so
lower the default efi log level to exclude them.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Merge series from Peng Fan <peng.fan@nxp.com>:
This patchset is a pick up of patch 1,2 from [1]. And I also collect
Linus's R-b for patch 2. After this patchset, there is only one user of
of_gpio.h left in sound driver(pxa2xx-ac97).
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
Patch 1 is to drop legacy platform data which in-tree no users are using it
Patch 2 is to convert to GPIO descriptors
Checking the DTS that use the device, all are using GPIOD_ACTIVE_LOW
polarity for reset-gpios, so all should work as expected with this patch.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-0-c0db9d3fd6e9@nxp.com/
The definition of tegra186_bpmp_ops was not updated in sync with the use
in bpmp.c:
drivers/firmware/tegra/bpmp.c:856:17: error: 'tegra186_bpmp_ops' undeclared here (not in a function); did you mean 'tegra_bpmp_ops'?
856 | .ops = &tegra186_bpmp_ops,
aarch64-linux-ld: drivers/firmware/tegra/bpmp.o:(.rodata+0x2f0): undefined reference to `tegra186_bpmp_ops'
Update the Makefile as needed.
There is really no need to hide the declaration based on the configuration,
so just expose it unconditionally so it never has to be updated again
for the next SoC.
Fixes: 94bce2cf7c ("firmware: tegra: bpmp: Add support on Tegra264")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250711082409.1398497-1-arnd@kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250703183434.2073375-1-robh@kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
To make sure genpd tries to power off unused PM domains, let's call
of_genpd_sync_state() from our own ->sync_state() callback.
Cc: Michal Simek <michal.simek@amd.com>
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-17-ulf.hansson@linaro.org
As there no longer any users outside the zynqmp firmware driver of
zynqmp_pm_init_finalize(), let's turn into a local static function.
Cc: Michal Simek <michal.simek@amd.com>
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-16-ulf.hansson@linaro.org
Rather than having the genpd provider to add device_links for each device
that gets attached, to implement the ->sync_state() support, let's rely on
fw_devlink to do this for us.
In this way, we can simplify the code by moving the ->sync_state() callback
into the firmware driver, so let's do that.
Cc: Michael Tretter <m.tretter@pengutronix.de>
Cc: Michal Simek <michal.simek@amd.com>
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-15-ulf.hansson@linaro.org
Recent OVMF versions (edk2-stable202508 + newer) can write their debug
log to a memory buffer. This driver exposes the log content via sysfs
(/sys/firmware/efi/ovmf_debug_log).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The old SET_SYSTEM_SLEEP_PM_OPS() macro leads to a warning about an
unused function:
| drivers/firmware/arm_scmi/scmi_power_control.c:363:12: error:
| 'scmi_system_power_resume' defined but not used [-Werror=unused-function]
| static int scmi_system_power_resume(struct device *dev)
The proper way to do this these days is to use SYSTEM_SLEEP_PM_OPS()
and pm_sleep_ptr().
Fixes: 9a0658d399 ("firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250709070107.1388512-1-arnd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Some platforms may be configured to not support notification events from
certain sources. This scenario is already handled gracefully by avoiding
any attempt to send a notification enable request for those sources, as
such requests would inevitably fail.
However, in a more extreme case, a platform might not support even a
single source for a given event type. In this situation, allowing
notifier registration is meaningless. Attempting to register a notifier
would serve no purpose and only result in unnecessary overhead.
To address this, we now detect such conditions during the protocol
initialization. When identified, we flag the unsupported event types and
reject any subsequent notifier registration attempts for them with
-ENOTSUPP. This early rejection avoids redundant processing and
simplifies runtime logic.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20250707144220.485365-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When CONFIG_DEBUG_EFI is enabled, some objects are needlessly rebuilt.
[Steps to reproduce]
Enable CONFIG_DEBUG_EFI and run 'make' twice in a clean source tree.
On the second run, arch/arm64/kernel/head.o is rebuilt even though
no files have changed.
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- clean
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
[ snip ]
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
CALL scripts/checksyscalls.sh
AS arch/arm64/kernel/head.o
AR arch/arm64/kernel/built-in.a
AR arch/arm64/built-in.a
AR built-in.a
[ snip ]
The issue is caused by the use of the $(realpath ...) function.
At the time arch/arm64/kernel/Makefile is parsed on the first run,
$(objtree)/vmlinux does not exist. As a result,
$(realpath $(objtree)/vmlinux) expands to an empty string.
On the second run of Make, $(objtree)/vmlinux already exists, so
$(realpath $(objtree)/vmlinux) expands to the absolute path of vmlinux.
However, this change in the command line causes arch/arm64/kernel/head.o
to be rebuilt.
To address this issue, use $(abspath ...) instead, which does not require
the file to exist. While $(abspath ...) does not resolve symlinks, this
should be fine from a debugging perspective.
The GNU Make manual [1] clearly explains the difference between the two:
$(realpath names...)
For each file name in names return the canonical absolute name.
A canonical name does not contain any . or .. components, nor any
repeated path separators (/) or symlinks. In case of a failure the
empty string is returned. Consult the realpath(3) documentation for
a list of possible failure causes.
$(abspath namees...)
For each file name in names return an absolute name that does not
contain any . or .. components, nor any repeated path separators (/).
Note that, in contrast to realpath function, abspath does not resolve
symlinks and does not require the file names to refer to an existing
file or directory. Use the wildcard function to test for existence.
The same problem exists in drivers/firmware/efi/libstub/Makefile.zboot.
On the first run of Make, $(obj)/vmlinuz.efi.elf does not exist when the
Makefile is parsed, so -DZBOOT_EFI_PATH is set to an empty string.
Replace $(realpath ...) with $(abspath ...) there as well.
[1]: https://www.gnu.org/software/make/manual/make.html#File-Name-Functions
Fixes: 757b435aaa ("efi: arm64: Add vmlinux debug link to the Image binary")
Fixes: a050910972 ("efi/libstub: implement generic EFI zboot")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250625125555.2504734-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
- Drop preprocessor macros in zboot.lds which is not preprocessed
- Fix zboot .data section size and raw size when SBAT is enabled
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaFVIPQAKCRAwbglWLn0t
XM7OAP9Vx4c3/gYVyE1sRl1xf7c4V+X8GKkBVt6zCrBANhcWxQEAwaVTDGn6Mu2B
HNVShLYFvR1HzxzaQ1I7pmIUebntZwQ=
=+y4d
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Drop preprocessor macros in zboot.lds which is not preprocessed
- Fix zboot .data section size and raw size when SBAT is enabled
* tag 'efi-fixes-for-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Fix .data section size calculations when .sbat is present
efi: Drop preprocessor directives from zboot.lds
Fix a race condition where a second suspend notification from another
SCMI agent wakes the system before SCMI_SYSPOWER_IDLE is set, leading
to ignored suspend requests. This is due to interrupts triggering early
execution of `scmi_userspace_notifier()` before the SCMI state is updated.
To resolve this, set SCMI_SYSPOWER_IDLE earlier in the device resume
path, prior to `thaw_processes()`. This ensures the SCMI state is
correct when the notifier runs, allowing the system to suspend again
as expected.
On some platforms using SCMI, SCP cannot distinguish between CPU idle
and suspend since both result in cluster power-off. By explicitly setting
the idle state early, the Linux SCMI agent can correctly re-suspend in
response to external notifications.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250704-scmi-pm-v2-2-9316cec2f9cc@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Introduce suspend and resume power management callbacks for `scmi_bus_type`,
modeled after `platform_pm_ops`. This enables SCMI devices on the bus to
implement their own suspend and resume behavior, allowing for more
fine-grained power control at the device level.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250704-scmi-pm-v2-1-9316cec2f9cc@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The IVC code is library code that other drivers need to select if they
need that library. However, if the symbol is user-selectable this can
lead to conflicts.
Fix this by making the symbol only selectable for COMPILE_TEST and add
a select TEGRA_IVC to TEGRA_BPMP, which is currently the only user.
Link: https://lore.kernel.org/r/20250506133118.1011777-10-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enhance the existing SCMI transfer tracepoints by including the current
in-flight transfer count in `scmi_xfer_begin` and `scmi_xfer_end`.
Introduce a new helper `scmi_inflight_count()` to retrieve the active
transfer count from the SCMI debug counters when debug is enabled.
This trace data is useful for visualizing transfer activity over time
and identifying congestion or unexpected behavior in SCMI messaging.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-4-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a new debug counter, `XFERS_INFLIGHT`, to track the number of
currently active in-flight SCMI message transfers. This helps in
understanding system behavior and diagnosing potential issues with
pending or stuck messages.
The counter is incremented when a transfer is registered as in-flight,
and decremented when it completes and is released.
It is automatically added to debugfs for visibility through SCMI debugfs.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-3-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Introduce a new `scmi_dec_count` helper to complement the existing
`scmi_inc_count`, allowing controlled decrement of SCMI debug counters.
This provides symmetry in debug counter management and enables
accurate tracking of counters that may both increase and decrease,
such as those used for in-flight message tracking.
Only active when CONFIG_ARM_SCMI_DEBUG_COUNTERS is enabled.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-2-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
1. Correct CONFIG option in arm64 defconfig enabling the Qualcomm SoC
SNPS EUSB2 phy driver, because Kconfig entry was renamed when
changing the driver to a common one, shared with Samsung SoC, thus
defconfig lost that driver effectively.
2. Exynos ACPM: Fix timeouts happening with multiple requests.
-----BEGIN PGP SIGNATURE-----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=5+or
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung SoC fixes for v6.16
1. Correct CONFIG option in arm64 defconfig enabling the Qualcomm SoC
SNPS EUSB2 phy driver, because Kconfig entry was renamed when
changing the driver to a common one, shared with Samsung SoC, thus
defconfig lost that driver effectively.
2. Exynos ACPM: Fix timeouts happening with multiple requests.
* tag 'samsung-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: fix timeouts on xfers handling
arm64: defconfig: update renamed PHY_SNPS_EUSB2
Sustained frequency when greater than or equal to 4Ghz on 64-bit devices
currently result in marking all frequencies as turbo. Address the turbo
frequency selection bug by fixing the truncation.
Fixes: a897575e79 ("firmware: arm_scmi: Add support for marking certain frequencies as turbo")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Message-Id: <20250514214719.203607-1-quic_sibis@quicinc.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Similar to zboot architectures, implement support for embedding SBAT data
for x86. Put '.sbat' section in between '.data' and '.text' as the former
also covers '.bss' and '.pgtable' and thus must be the last one in the
file.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/20250603091951.57775-1-vkuznets@redhat.com
Commit 0f9a1739dd ("efi: zboot specific mechanism for embedding SBAT
section") neglected to adjust the sizes of the .data section when
CONFIG_EFI_SBAT_FILE is set. As the result, the produced PE binary is
incorrect and some tools complain about it. E.g. 'sbsign' reports:
# sbsign --key my.key --cert my.crt arch/arm64/boot/vmlinuz.efi
warning: file-aligned section .data extends beyond end of file
warning: checksum areas are greater than image size. Invalid section table?
Note, '__data_size' is also used in the PE optional header and it is not
entirely clear whether .sbat needs to be accounted as part of
SizeOfInitializedData or not. As the header seems to be unused by the real
world firmware, keeping the field equal to __data_size.
Fixes: 0f9a1739dd ("efi: zboot specific mechanism for embedding SBAT section")
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@gmx.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Remove two unused pointers from struct cs_dsp_coeff_ctl by taking the
struct list_head out of struct cs_dsp_alg_region. On a x86_64 build
this saves 16 bytes per control.
Each cs_dsp_coeff_ctl instance needs to keep information about the
algorithm region it refers to. This is done by embedding an instance
of struct cs_dsp_alg_region. But cs_dsp_alg_region was also used to
store entries in a list of algorithm regions, and so had a struct
list_head object for that purpose. This list_head object is not used
with the embedded object in struct cs_dsp_alg_region so was just
wasted bytes.
A new struct cs_dsp_alg_region_list_item has been defined for creating
the list of algorithm regions. It contains a struct cs_dsp_alg_region
and a struct list_head.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250616103052.66537-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When Linux is running as the root partition under Microsoft Hypervisor
(MSHV) a.k.a Hyper-V, smc is used as the conduit for smc calls.
Extend arm_smccc_hypervisor_has_uuid() to support this usecase. Use
arm_smccc_1_1_invoke to retrieve and use the appropriate conduit instead
of supporting only hvc.
Boot tested on MSHV guest, MSHV root & KVM guest.
Signed-off-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Message-Id: <20250521094049.960056-1-anirudh@anirudhrb.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Older versions of `ld` don't seem to support preprocessor directives in
linker scripts, e.g. on RHEL9's ld-2.35.2-63.el9 the build fails with:
ld:./drivers/firmware/efi/libstub/zboot.lds:32: ignoring invalid character `#' in expression
ld:./drivers/firmware/efi/libstub/zboot.lds:33: syntax error
We don't seem to need these '#ifdef', no empty .sbat section is created
when CONFIG_EFI_SBAT_FILE="":
# objdump -h arch/arm64/boot/vmlinuz.efi
arch/arm64/boot/vmlinuz.efi: file format pei-aarch64-little
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 00b94000 0000000000001000 0000000000001000 00001000 2**2
CONTENTS, ALLOC, LOAD, READONLY, CODE
1 .data 00000200 0000000000b95000 0000000000b95000 00b95000 2**2
CONTENTS, ALLOC, LOAD, DATA
Fixes: 0f9a1739dd ("efi: zboot specific mechanism for embedding SBAT section")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The mailbox framework has a single inflight request at a time. If
a request is sent while another is still active, it will be queued
to the mailbox core ring buffer.
ACPM protocol did not serialize the calls to the mailbox subsystem so we
could start the timeout ticks in parallel for multiple requests, while
just one was being inflight.
Consider a hypothetical case where the xfer timeout is 100ms and an ACPM
transaction takes 90ms:
| 0ms: Message #0 is queued in mailbox layer and sent out, then sits
| at acpm_dequeue_by_polling() with a timeout of 100ms
| 1ms: Message #1 is queued in mailbox layer but not sent out yet.
| Since send_message() doesn't block, it also sits at
| acpm_dequeue_by_polling() with a timeout of 100ms
| ...
| 90ms: Message #0 is completed, txdone is called and message #1 is sent
| 101ms: Message #1 times out since the count started at 1ms. Even though
| it has only been inflight for 11ms.
Fix the problem by moving mbox_send_message() and mbox_client_txdone()
immediately after the message has been written to the TX queue and while
still keeping the ACPM TX queue lock. We thus tie together the TX write
with the doorbell ring and mark the TX as done after the doorbell has
been rung. This guarantees that the doorbell has been rang before
starting the timeout ticks. We should also see some performance
improvement as we no longer wait to receive a response before ringing
the doorbell for the next request, so the ACPM firmware shall be able to
drain faster the TX queue. Another benefit is that requests are no
longer able to ring the doorbell one for the other, so it eases
debugging. Finally, the mailbox software queue will always contain a
single doorbell request due to the serialization done at the ACPM TX
queue level. Protocols like ACPM, that handle their own hardware queues
need a passthrough mailbox API, where they are able to just ring the
doorbell or flip a bit directly into the mailbox controller. The mailbox
software queue mechanism, the locking done into the mailbox core is not
really needed, so hopefully this lays the foundation for a passthrough
mailbox API.
Reported-by: André Draszik <andre.draszik@linaro.org>
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250606-acpm-timeout-v2-1-306b1aa07a6c@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The notifier callback node allocation is currently done while holding
the notify_lock mutex. While this is safe even if memory allocation may
sleep, we need to move the allocation outside the locked region in
preparation to move from using muxtes to rwlocks.
Move the memory allocation to avoid potential sleeping in atomic context
once the locks are moved from mutex to rwlocks.
Fixes: e0573444ed ("firmware: arm_ffa: Add interfaces to request notification callbacks")
Message-Id: <20250528-ffa_notif_fix-v1-2-5ed7bc7f8437@arm.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Commit e0573444ed ("firmware: arm_ffa: Add interfaces to request
notification callbacks") adds support for notifier callbacks by allocating
and inserting a callback node into a hashtable during registration of
notifiers. However, during unregistration, the code only removes the
node from the hashtable without freeing the associated memory, resulting
in a memory leak.
Resolve the memory leak issue by ensuring the allocated notifier callback
node is properly freed after it is removed from the hashtable entry.
Fixes: e0573444ed ("firmware: arm_ffa: Add interfaces to request notification callbacks")
Message-Id: <20250528-ffa_notif_fix-v1-1-5ed7bc7f8437@arm.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a
symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
-----BEGIN PGP SIGNATURE-----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=Dy49
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
1, Adjust the 'make install' operation;
2, Support SCHED_MC (Multi-core scheduler);
3, Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS;
4, Enable HAVE_ARCH_STACKLEAK;
5, Increase max supported CPUs up to 2048;
6, Introduce the numa_memblks conversion;
7, Add PWM controller nodes in dts;
8, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=FH8x
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
A collection of fix patches for 6.16-rc1 merge window.
Most of changes are about ASoC, especially lots of AVS driver fixes.
Larger LOCs are seen in TAS571x codec drivers, but the changes are
trivial and safe. The rest are all device-specific small fixes.
-----BEGIN PGP SIGNATURE-----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=T+Ix
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fix patches for the 6.16-rc1 merge window.
Most of changes are about ASoC, especially lots of AVS driver fixes.
Larger LOCs are seen in TAS571x codec drivers, but the changes are
trivial and safe. The rest are all device-specific small fixes"
* tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ASoC: Intel: avs: boards: Fix rt5663 front end name
ASoC: Intel: avs: Simplify verification of parse_int_array() result
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
ALSA: hda: Ignore unsol events for cards being shut down
ALSA: hda: Add new pci id for AMD GPU display HD audio controller
ALSA: hda: cs35l41: Constify regmap_irq_chip
ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
ASoC: pcm: Do not open FEs with no BEs connected
ASoC: rt1320: fix speaker noise when volume bar is 100%
ASoC: Intel: avs: Include missing string.h
ASoC: Intel: avs: Verify content returned by parse_int_array()
ASoC: Intel: avs: Verify kcalloc() status when setting constraints
ASoC: Intel: avs: Fix paths in MODULE_FIRMWARE hints
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
ASoC: Intel: avs: Fix PPLCxFMT calculation
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
ASoC: codecs: hda: Fix RPM usage count underflow
ASoC: amd: yc: Add support for Lenovo Yoga 7 16ARP8
ASoC: tas571x: fix tas5733 num_controls
...
These objects are built as prerequisites of %.stub.o files.
There is no need to use extra-y, which is planned for deprecation.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use the helper screen_info_video_type() to get the framebuffer
type from struct screen_info. Handle supported values in sorted
switch statement.
Reading orig_video_isVGA is unreliable. On most systems it is a
VIDEO_TYPE_ constant. On some systems with VGA it is simply set
to 1 to signal the presence of a VGA output. See vga_probe() for
an example. Retrieving the screen_info type with the helper
screen_info_video_type() detects these cases and returns the
appropriate VIDEO_TYPE_ constant. For VGA, sysfb creates a device
named "vga-framebuffer".
The sysfb code has been taken from vga16fb, where it likely didn't
work correctly either. With this bugfix applied, vga16fb loads for
compatible vga-framebuffer devices.
Fixes: 0db5b61e0d ("fbdev/vga16fb: Create EGA/VGA devices in sysfb code")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "Uwe Kleine-König" <u.kleine-koenig@baylibre.com>
Cc: Zsolt Kajtar <soci@c64.rulez.org>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250603154838.401882-1-tzimmermann@suse.de
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmg+jmETHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXiWaCACjYSQcCXW2nnZuWUnGMJq8HD5XGBAH
tNYzOyp2Y4bXEJzfmbHv8UpJynGr3IFKybCnhm0uAQZCmiR5k4CfMvjPQXcJu9LK
7yUI/dTGrRGG7f3NClWK2vXg7ATqzRGiPuPDk2lDcP04aQQWaUMDYe5SXIgcqKyZ
cm2OVHapHGbQ7wA+xXGQcUBb6VJ5+BrQUVOqaEQyl4LURvjaQcn7rVDS0SmEi8gq
42+KDVd8uWYos5dT57HIq9UI5og3PeTvAvHsx26eX8JWNqwXLgvxRH83kstK+GWY
uG3sOm5yRbJvErLpJHnyBOlXDFNw2EBeLC1VyhdJXBR8RabgI+H/mrY3
=4bTC
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel)
- Fixes for Hyper-V UIO driver (Long Li)
- Fixes for Hyper-V PCI driver (Michael Kelley)
- Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley)
- Documentation updates for Hyper-V VMBus (Michael Kelley)
- Enhance logging for hv_kvp_daemon (Shradha Gupta)
* tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits)
Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests
Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir
Documentation: hyperv: Update VMBus doc with new features and info
PCI: hv: Remove unnecessary flex array in struct pci_packet
Drivers: hv: Remove hv_alloc/free_* helpers
Drivers: hv: Use kzalloc for panic page allocation
uio_hv_generic: Align ring size to system page
uio_hv_generic: Use correct size for interrupt and monitor pages
Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary
arch/x86: Provide the CPU number in the wakeup AP callback
x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap()
PCI: hv: Get vPCI MSI IRQ domain from DeviceTree
ACPI: irq: Introduce acpi_get_gsi_dispatcher()
Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device()
Drivers: hv: vmbus: Get the IRQ number from DeviceTree
dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties
arm64, x86: hyperv: Report the VTL the system boots in
arm64: hyperv: Initialize the Virtual Trust Level field
Drivers: hv: Provide arch-neutral implementation of get_vtl()
Drivers: hv: Enable VTL mode for arm64
...
Updates are across the usual driver subsystems with SoC specific drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups for a
few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus better
support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google, aspeed,
wondermedia, ti, nxp, renesas, hisilicon, mediatek, broadcom and samsung
SoCs
-----BEGIN PGP SIGNATURE-----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=RhpA
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Updates are across the usual driver subsystems with SoC specific
drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups
for a few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus
better support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris
Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google,
aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
broadcom and samsung SoCs"
* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
soc: aspeed: lpc: Fix impossible judgment condition
ARM: aspeed: Don't select SRAM
docs: firmware: qcom_scm: Fix kernel-doc warning
soc: fsl: qe: Consolidate chained IRQ handler install/remove
firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
dt-bindings: cache: add QiLai compatible to ax45mp
memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
bus: fsl-mc: Use strscpy() instead of strscpy_pad()
soc: fsl: qbman: Remove const from portal->cgrs allocation type
bus: fsl_mc: Fix driver_managed_dma check
bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
bus: fsl-mc: drop useless cleanup
...
- Add support for emitting a .sbat section into the EFI zboot image, so
that downstreams can easily include revocation metadata in the signed
EFI images
- Align PE symbolic constant names with other projects
- Bug fix for the efi_test module
- Log the physical address and size of the EFI memory map when failing
to map it
- A kerneldoc fix for the EFI stub code
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaDHdgwAKCRAwbglWLn0t
XBqgAQDXm8RQQfY4E1ibSVn0zQKwdIM57uU+7vp+HMCJ88oNhwEAkndCq0rMv9qp
aVOR/HWUzAZRUonPyftXiwXImze3lgY=
=sj5+
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Not a lot going on in the EFI tree this cycle. The only thing that
stands out is the new support for SBAT metadata, which was a bit
contentious when it was first proposed, because in the initial
incarnation, it would have required us to maintain a revocation index,
and bump it each time a vulnerability affecting UEFI secure boot got
fixed. This was shot down for obvious reasons.
This time, only the changes needed to emit the SBAT section into the
PE/COFF image are being carried upstream, and it is up to the distros
to decide what to put in there when creating and signing the build.
This only has the EFI zboot bits (which the distros will be using for
arm64); the x86 bzImage changes should be arriving next cycle,
presumably via the -tip tree.
Summary:
- Add support for emitting a .sbat section into the EFI zboot image,
so that downstreams can easily include revocation metadata in the
signed EFI images
- Align PE symbolic constant names with other projects
- Bug fix for the efi_test module
- Log the physical address and size of the EFI memory map when
failing to map it
- A kerneldoc fix for the EFI stub code"
* tag 'efi-next-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
include: pe.h: Fix PE definitions
efi/efi_test: Fix missing pending status update in getwakeuptime
efi: zboot specific mechanism for embedding SBAT section
efi/libstub: Describe missing 'out' parameter in efi_load_initrd
efi: Improve logging around memmap init
Add support for the stackleak feature. It initializes the stack with the
poison value before returning from system calls which improves the kernel
security.
At the same time, disables the plugin in EFI stub code because EFI stub
is out of scope for the protection.
Tested on Loongson-3A5000 (enable GCC_PLUGIN_STACKLEAK and LKDTM):
# echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
# dmesg
lkdtm: Performing direct entry STACKLEAK_ERASING
lkdtm: stackleak stack usage:
high offset: 320 bytes
current: 448 bytes
lowest: 1264 bytes
tracked: 1264 bytes
untracked: 208 bytes
poisoned: 14528 bytes
low offset: 64 bytes
lkdtm: OK: the rest of the thread stack is properly erased
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree.
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls.
- Fix a node refcount imbalance in the PSCI device-tree code.
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4.
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM guests
can reliably query the underlying CPU types from the VMM.
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code.
Entry code:
- Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be
selected.
Memory management:
- Prevent BSS exports from being used by the early PI code.
- Propagate level and stride information to the low-level TLB
invalidation routines when operating on hugetlb entries.
- Use the page-table contiguous hint for vmap() mappings with
VM_ALLOW_HUGE_VMAP where possible.
- Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode"
and hook this up on arm64 so that the trailing DSB (used to publish
the updates to the hardware walker) can be deferred until the end of
the mapping operation.
- Extend mmap() randomisation for 52-bit virtual addresses (on par with
48-bit addressing) and remove limited support for randomisation of
the linear map.
Perf and PMUs:
- Add support for probing the CMN-S3 driver using ACPI.
- Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers.
Selftests:
- Fix FPSIMD and SME tests to align with the freshly re-enabled SME
support.
- Fix default setting of the OUTPUT variable so that tests are
installed in the right location.
vDSO:
- Replace raw counter access from inline assembly code with a call to
the the __arch_counter_get_cntvct() helper function.
Miscellaneous:
- Add some missing header inclusions to the CCA headers.
- Rework rendering of /proc/cpuinfo to follow the x86-approach and
avoid repeated buffer expansion (the user-visible format remains
identical).
- Remove redundant selection of CONFIG_CRC32
- Extend early error message when failing to map the device-tree blob.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmg1uTgQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFv2CAC9S5OW0btOAo7V/LFBpLhJM3hdIV6Sn6N1
d/K5znuqPBG6VPfBrshaZltEl/C3U8KG4H8xrlX5cSo7CRuf3DgVBw3kiZ6ERZj6
1gnKR54juA1oWhcroPl0s76ETWj3N4gO036u2qOhWNAYflDunh1+bCIGJkG4H/yP
wqtWn974YUbad/zQJSbG3IMO1yvxZ/PsNpVF8HjyQ0/ZPWsYTscrhNQ0hWro17sR
CTcUaGxH4GrXW24EGNgkLB9aq67X2rtGGtaIlp5oFl8FuLklc7TYbPwJp8cPCTNm
0Sp0mpuR9M675pYIKoCI9m5twc46znRIKmbXi5LvPd77418y3jTf
=03N4
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The headline feature is the re-enablement of support for Arm's
Scalable Matrix Extension (SME) thanks to a bumper crop of fixes
from Mark Rutland.
If matrices aren't your thing, then Ryan's page-table optimisation
work is much more interesting.
Summary:
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code
Entry code:
- Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be
selected
Memory management:
- Prevent BSS exports from being used by the early PI code
- Propagate level and stride information to the low-level TLB
invalidation routines when operating on hugetlb entries
- Use the page-table contiguous hint for vmap() mappings with
VM_ALLOW_HUGE_VMAP where possible
- Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode"
and hook this up on arm64 so that the trailing DSB (used to publish
the updates to the hardware walker) can be deferred until the end
of the mapping operation
- Extend mmap() randomisation for 52-bit virtual addresses (on par
with 48-bit addressing) and remove limited support for
randomisation of the linear map
Perf and PMUs:
- Add support for probing the CMN-S3 driver using ACPI
- Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers
Selftests:
- Fix FPSIMD and SME tests to align with the freshly re-enabled SME
support
- Fix default setting of the OUTPUT variable so that tests are
installed in the right location
vDSO:
- Replace raw counter access from inline assembly code with a call to
the the __arch_counter_get_cntvct() helper function
Miscellaneous:
- Add some missing header inclusions to the CCA headers
- Rework rendering of /proc/cpuinfo to follow the x86-approach and
avoid repeated buffer expansion (the user-visible format remains
identical)
- Remove redundant selection of CONFIG_CRC32
- Extend early error message when failing to map the device-tree
blob"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: cputype: Add cputype definition for HIP12
arm64: el2_setup.h: Make __init_el2_fgt labels consistent, again
perf/arm-cmn: Add CMN S3 ACPI binding
arm64/boot: Disallow BSS exports to startup code
arm64/boot: Move global CPU override variables out of BSS
arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace
perf/arm-cmn: Initialise cmn->cpu earlier
kselftest/arm64: Set default OUTPUT path when undefined
arm64: Update comment regarding values in __boot_cpu_mode
arm64: mm: Drop redundant check in pmd_trans_huge()
arm64/mm: Re-organise setting up FEAT_S1PIE registers PIRE0_EL1 and PIR_EL1
arm64/mm: Permit lazy_mmu_mode to be nested
arm64/mm: Disable barrier batching in interrupt contexts
arm64/cpuinfo: only show one cpu's info in c_show()
arm64/mm: Batch barriers when updating kernel mappings
mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes
arm64/mm: Support huge pte-mapped pages in vmap
mm/vmalloc: Gracefully unmap huge ptes
mm/vmalloc: Warn on improper use of vunmap_range()
arm64/mm: Hoist barriers out of set_ptes_anysz() loop
...
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmg2aVAACgkQDHTzWXnE
hr6DjhAApr2fZjugU3EmpsARdcIWgEd+X65R97ef7RlUGqBKm2joSwZGOhH0oBsG
9WyO92Qzu6XMe8OibKqY4D2hir9UPz5v+uEWe3q9CzZGbNyAwyVRjVkaKpnI9upv
1dmHFI7HgPu6qbz6RfPIfgALBLXvVXMaQ4+ZgN/cLtZFa+OLAV5ByqWsRPPXZFb0
F/pQGQ4ursglfA+LH3SVPfnTN53lu93IlM5/Os9OQQGj+44w94zQ6DCm7CY1AugH
n+RM/0Yv7WaoF1ByeOtq4FcrmLRrd+ozsvITbRZqhOx7zS/mhP8LRzAwgKWOYzSh
puKunyQiSdHR7FSqSi8uyY3YumcLWNa/17LMKoTf+KqweJbKGE7RVBuFBn6WUdPb
AYHZrSB4USAeyahdrrsU+q7ltu5urs5ckpbXsRurMiaUz/BLim1PIm3N5FDLPY7B
PD1n1FcMUv3CmJT5Y+aNIQgmf1/dETESRTSAgSoOo3gNp6jdRCYqSuWIBsppibWT
26+tyz0/FGhE50QviHzg0Sv+jd/g93fN6snNlV8wNFMviq3bC69Toa+y3qJ5e7UC
/42R7nCWdkCZJfr6E67rOaahe9TDV/LXLqPErwptOkdK8sMchaIgF+deybgTtTi/
zGRBfjLvb5ocYBmPbeGX4mtXNRpyZ3o9I0QUyGUO4zMwFXmFwn0=
=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
We've received a lot of activities in this cycle, mostly about leaf
driver codes rather than the core part, but with a good mixture of
code cleanups and new driver additions. Below are some highlights:
* ASoC:
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices; not much used as of this writing, rather for
future implementations
- Conversion of quite a few drivers to newer GPIO APIs
- Continued cleanups and helper usages in allover places
- Support for a wider range of Intel AVS platforms
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32
Everest Semiconductor ES8375 and ES8389, Longsoon-1 AC'97
controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and Rockchip
SAI controllers
* HD-audio:
- Lots of cleanups of TAS2781 codec drivers
- A new HD-audio control bound via ACPI for Nvidia
- Support for Tegra264, Intel WCL, usual new codec quirks
* USB-audio:
- Fix a race at removal of MIDI device
- Pioneer DJM-V10 support, Scarlett2 driver cleanups
* Misc:
- Cleanups of deprecated PCI functions
- Removal of unused / dead function codes
-----BEGIN PGP SIGNATURE-----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=ApEf
-----END PGP SIGNATURE-----
Merge tag 'sound-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a lot of activities in this cycle, mostly about leaf
driver codes rather than the core part, but with a good mixture of
code cleanups and new driver additions. Below are some highlights:
ASoC:
- Support for automatically enumerating DAIs from standards
conforming SoundWire SDCA devices; not much used as of this
writing, rather for future implementations
- Conversion of quite a few drivers to newer GPIO APIs
- Continued cleanups and helper usages in allover places
- Support for a wider range of Intel AVS platforms
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32
Everest Semiconductor ES8375 and ES8389, Longsoon-1 AC'97
controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and
Rockchip SAI controllers
HD-audio:
- Lots of cleanups of TAS2781 codec drivers
- A new HD-audio control bound via ACPI for Nvidia
- Support for Tegra264, Intel WCL, usual new codec quirks
USB-audio:
- Fix a race at removal of MIDI device
- Pioneer DJM-V10 support, Scarlett2 driver cleanups
Misc:
- Cleanups of deprecated PCI functions
- Removal of unused / dead function codes"
* tag 'sound-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (364 commits)
firmware: cs_dsp: Fix OOB memory read access in KUnit test
ASoC: codecs: add support for ES8375
ASoC: dt-bindings: Add Everest ES8375 audio CODEC
ALSA: hda: acpi: Make driver's match data const static
ALSA: hda: acpi: Use SYSTEM_SLEEP_PM_OPS()
ALSA: atmel: Replace deprecated strcpy() with strscpy()
ALSA: core: fix up bus match const issues.
ASoC: wm_adsp: Make cirrus_dir const
ASoC: tegra: Tegra264 support in isomgr_bw
ASoC: tegra: AHUB: Add Tegra264 support
ASoC: tegra: ADX: Add Tegra264 support
ASoC: tegra: AMX: Add Tegra264 support
ASoC: tegra: I2S: Add Tegra264 support
ASoC: tegra: Update PLL rate for Tegra264
ASoC: tegra: ASRC: Update ARAM address
ASoC: tegra: ADMAIF: Add Tegra264 support
ASoC: tegra: CIF: Add Tegra264 support
dt-bindings: ASoC: Document Tegra264 APE support
dt-bindings: ASoC: admaif: Add missing properties
ASoC: dt-bindings: audio-graph-card2: reference audio-graph routing property
...
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*() namespace
convention.
There are is another large converstion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next. The
conversion scripts will be run towards the end of the merge window and a
pull request sent once all conflict dependencies have been merged.
-----BEGIN PGP SIGNATURE-----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=FHGU
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"Another set of timer API cleanups:
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*()
namespace convention.
There is another large conversion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next.
The conversion scripts will be run towards the end of the merge window
and a pull request sent once all conflict dependencies have been
merged"
* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
timers: Rename init_timers() as timers_init()
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
timers: Rename __init_timer() as __timer_init()
timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
timers: Rename init_timer_key() as timer_init_key()
Boot code changes:
- A large series of changes to reorganize the x86 boot code into a better isolated
and easier to maintain base of PIC early startup code in arch/x86/boot/startup/,
by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86 boot code
reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y
(Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary (Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar)
- Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish()
(Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>
(Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko,
Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae,
Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse,
Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout,
Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta,
Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak,
Xin Li)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JgQo
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets().
The code uses mock_coeff_template.length_bytes (4 bytes) for register value
allocations. But later, this length is set to 8 bytes which causes
test code failures.
As fix, just remove the lenght override, keeping the original value 4
for all operations.
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250523154151.1252585-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(),
because the source string length was rounded up to the allocation size.
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250523155814.1256762-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
The KVM/arm64 uses SMCCC to detect hypervisor presence. That code is
private, and it follows the SMCCC specification. Other existing and
emerging hypervisor guest implementations can and should use that
standard approach as well.
Factor out a common infrastructure that the guests can use, update KVM
to employ the new API. The central notion of the SMCCC method is the
UUID of the hypervisor, and the new API follows that.
No functional changes. Validated with a KVM/arm64 guest.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250428210742.435282-2-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-2-romank@linux.microsoft.com>
A few last minute fixes:
- two driver fixes for samsung/google platforms, both addressing
mistakes in changes from the 6.15 merge window
- a revert for an allwinner devicetree change that caused problems
- a fix for an older regression with the LEDs on Marvell Armada 3720
- a defconfig change to enable chacha20 again after a crypto
subsystem change in 6.15 inadventently turned it off
-----BEGIN PGP SIGNATURE-----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=bZbJ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes:
- two driver fixes for samsung/google platforms, both addressing
mistakes in changes from the 6.15 merge window
- a revert for an allwinner devicetree change that caused problems
- a fix for an older regression with the LEDs on Marvell Armada 3720
- a defconfig change to enable chacha20 again after a crypto
subsystem change in 6.15 inadventently turned it off"
* tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
soc: samsung: usi: prevent wrong bits inversion during unconfiguring
firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
KASAN reported out of bounds access - cs_dsp_mock_bin_add_name_or_info(),
because the source string length was rounded up to the allocation size.
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20250523102102.1177151-1-perex@perex.cz
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow list QSEECOM for EFI variable services on on the Asus Zenbook A14,
and block list TZMEM on the SM7150 platform to avoid issues with rmtfs.
Extend the last-level cache (llcc) driver to support version 6 of the
hardware and enable SM8750 support.
Also add socinfo for the SM8750 platform.
Re-enable UCSI support on SC8280XP, now that the reported crash has been
dealt with, and filter the altmode notifications to avoid spurious
hotplug events being propagated to user space.
Add SM7150 support to pd-mapper.
-----BEGIN PGP SIGNATURE-----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=6aIm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=AXtY
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.16
Allow list QSEECOM for EFI variable services on on the Asus Zenbook A14,
and block list TZMEM on the SM7150 platform to avoid issues with rmtfs.
Extend the last-level cache (llcc) driver to support version 6 of the
hardware and enable SM8750 support.
Also add socinfo for the SM8750 platform.
Re-enable UCSI support on SC8280XP, now that the reported crash has been
dealt with, and filter the altmode notifications to avoid spurious
hotplug events being propagated to user space.
Add SM7150 support to pd-mapper.
* tag 'qcom-drivers-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: llcc-qcom: Add support for SM8750
soc: qcom: llcc-qcom: Add support for LLCC V6
dt-bindings: cache: qcom,llcc: Document SM8750 LLCC block
soc: qcom: socinfo: add SM8750 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for SM8750
dt-bindings: soc: qcom: qcom,rpm: add missing clock/-names properties
dt-bindings: soc: qcom,rpm: add missing clock-controller node
soc: qcom: smem: Update max processor count
firmware: qcom: tzmem: disable sm7150 platform
soc: qcom: pd-mapper: Add support for SM7150
soc: qcom: pmic_glink_altmode: fix spurious DP hotplug events
soc: qcom: smp2p: Fix fallback to qcom,ipc parse
soc: qcom: pmic_glink: enable UCSI on sc8280xp
firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A14
dt-bindings: soc: qcom,rpmh-rsc: Limit power-domains requirement
Link: https://lore.kernel.org/r/20250513215656.44448-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- ti_sci: Bug fix in CPU latency conversion from us to ms for TISCI protocol
- k3-socinfo: Add JTAG ID for AM62LX
- Code cleanups: wkup_m3_ipc: Use dev_err_probe, k3-ringacc: use
device_match_of_probe and knav_qmss_queue: drop unnecessary NULL check
-----BEGIN PGP SIGNATURE-----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=2TQF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=N/zC
-----END PGP SIGNATURE-----
Merge tag 'ti-driver-soc-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.16
- ti_sci: Bug fix in CPU latency conversion from us to ms for TISCI protocol
- k3-socinfo: Add JTAG ID for AM62LX
- Code cleanups: wkup_m3_ipc: Use dev_err_probe, k3-ringacc: use
device_match_of_probe and knav_qmss_queue: drop unnecessary NULL check
* tag 'ti-driver-soc-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: wkup_m3_ipc: Use dev_err_probe
firmware: ti_sci: Convert CPU latency constraint from us to ms
soc: ti: k3-socinfo: Add JTAG ID for AM62LX
soc: ti: knav_qmss_queue: Remove unnecessary NULL check before free_percpu()
soc: ti: k3-ringacc: Use device_match_of_node()
Link: https://lore.kernel.org/r/20250512144719.mpkyw2jbyzslb5hy@yearly
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The pending status was not being passed to user space, leading to
false test alarms when using the pending status. This patch ensures
that the pending status is correctly updated and exposed to user space
when calling getwakeuptime, preventing incorrect handling of the pending
status.
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
SBAT is a mechanism which improves SecureBoot revocations of UEFI binaries
by introducing a generation-based technique. Compromised or vulnerable UEFI
binaries can be prevented from booting by bumping the minimal required
generation for the specific component in the bootloader. More information
on the SBAT can be obtained here:
https://github.com/rhboot/shim/blob/main/SBAT.md
Upstream Linux kernel does not currently participate in any way in SBAT as
there's no existing policy in how SBAT generation number should be
defined. Keep the status quo and provide a mechanism for distro vendors and
anyone else who signs their kernel for SecureBoot to include their own SBAT
data. This leaves the decision on the policy to the vendor. Basically, each
distro implementing SecureBoot today, will have an option to inject their
own SBAT data during kernel build and before it gets signed by their
SecureBoot CA. Different distro do not need to agree on the common SBAT
component names or generation numbers as each distro ships its own 'shim'
with their own 'vendor_cert'/'vendor_db'
Implement support for embedding SBAT data for architectures using
zboot (arm64, loongarch, riscv). Put '.sbat' section in between '.data' and
'.text' as the former also covers '.bss' and thus must be the last one.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add description for members of qcom_scm_desc struct to avoid:
drivers/firmware/qcom/qcom_scm.h:56: warning: Function parameter or struct
member 'svc' not described in 'qcom_scm_desc'
drivers/firmware/qcom/qcom_scm.h:56: warning: Function parameter or struct
member 'cmd' not described in 'qcom_scm_desc'
drivers/firmware/qcom/qcom_scm.h:56: warning: Function parameter or struct
member 'owner' not described in 'qcom_scm_desc'
Signed-off-by: Unnathi Chalicheemala <unnathi.chalicheemala@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250403-fix_scm_doc_warn-v1-1-9cd36345db77@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Both Intel and AMD CPUs support 5-level paging, which is expected to
become more widely adopted in the future. All major x86 Linux
distributions have the feature enabled.
Remove CONFIG_X86_5LEVEL and related #ifdeffery for it to make it more readable.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250516123306.3812286-4-kirill.shutemov@linux.intel.com
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
These are updates from Marek Behún for the cznic platform drivers:
This series adds support for generating ECDSA signatures with hardware
stored private key on Turris Omnia and Turris MOX.
This ability is exposed via the keyctl() syscall.
* 'cznic/platform' of https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: use ffs() instead of __bf_shf()
firmware: turris-mox-rwtm: fix building without CONFIG_KEYS
platform: cznic: fix function parameter names
firmware: turris-mox-rwtm: Add support for ECDSA signatures with HW private key
firmware: turris-mox-rwtm: Drop ECDSA signatures via debugfs
platform: cznic: turris-omnia-mcu: Add support for digital message signing with HW private key
platform: cznic: Add keyctl helpers for Turris platform
platform: cznic: turris-omnia-mcu: Refactor requesting MCU interrupt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SHM bridge makes the SM7150 devices reset while probing the RMTFS
(in qcom_scm_assign_mem()). Blacklist the SHM Bridge on corresponding
platforms using SoC-level compat string.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250422213137.80366-13-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
1. Quirk framework to handle buggy firmware
With SCMI gaining broader adoption across arm64 platforms, it's
increasingly important to address how we consistently manage out-of-spec
SCMI firmware already deployed in the field. This change introduces a
lightweight quirk framework built around static_keys, enabling developers to:
- Define quirks and their match criteria, which can include:
o A list of compatibles ({ comp, comp2, NULL })
o Vendor ID / Sub-Vendor ID
o Firmware implementation version ranges ([Min_Vers, Max_Vers])
Matching proceeds from the most specific (longest match) to the least
specific. NULL entries are treated as wildcards (i.e., match any value).
This flexibility allows matching very specific combinations or just a
general compatible string.
The quirk code blocks/snippets implementing the workaround are placed near
their intended usage and guarded by a static_key that's tied to the quirk.
Once the SCMI core stack is initialized and retrieves platform info via the
base protocol, any matching quirks will have their associated static_keys
enabled.
2. Quirk for Qualcomm X1E platforms
On some Qualcomm X1E platforms, such as the Lenovo ThinkPad T14s, the
SCMI firmware fails to set the FastChannel support bit for PERF_LEVEL_GET,
yet it crashes when the driver attempts to fall back to standard messaging
which is clearly out-of-spec behavior.
To work around this, the new SCMI quirk framework is used to
unconditionally enable FC initialization for this firmware version.
In the future, once the fixed firmware version is identified, an upper
version bound can be added to the quirk match criteria. Alternatively,
matching can be further restricted using a SoC-specific compatible string
if always enabling FC proves problematic elsewhere.
3. Support for NXP i.MX LMM/CPU vendor protocol extensions
The i.MX95 System Manager (SM) implements Logical Machine Management (LMM)
and a CPU protocol to manage Logical Machines (LM) and CPUs (e.g., M7).
These changes integrate the vendor-specific protocol extensions
implementing the LMM and CPU protocols for the i.MX95, facilitating
standardized communication between the operating system and the platform's
firmware, which will be used by remoteproc drivers. The changes also
include the necessary device tree bindings.
4. Miscellaneous cleanups/changes
These mainly include polling support in SCMI raw mode. The cleanups
centralize error logging for SCMI device creation into a single helper
function, consolidate the device matching logic into a single function, and
ensure that devices must have a name for registration—removing support for
unnamed devices when matching drivers and devices for probing. Transport
devices are now excluded from bus matching, and the correct assignment of
the parent device for the arm-scmi platform device is ensured in the
transport drivers.
-----BEGIN PGP SIGNATURE-----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=aV7w
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VKvM
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.16
1. Quirk framework to handle buggy firmware
With SCMI gaining broader adoption across arm64 platforms, it's
increasingly important to address how we consistently manage out-of-spec
SCMI firmware already deployed in the field. This change introduces a
lightweight quirk framework built around static_keys, enabling developers to:
- Define quirks and their match criteria, which can include:
o A list of compatibles ({ comp, comp2, NULL })
o Vendor ID / Sub-Vendor ID
o Firmware implementation version ranges ([Min_Vers, Max_Vers])
Matching proceeds from the most specific (longest match) to the least
specific. NULL entries are treated as wildcards (i.e., match any value).
This flexibility allows matching very specific combinations or just a
general compatible string.
The quirk code blocks/snippets implementing the workaround are placed near
their intended usage and guarded by a static_key that's tied to the quirk.
Once the SCMI core stack is initialized and retrieves platform info via the
base protocol, any matching quirks will have their associated static_keys
enabled.
2. Quirk for Qualcomm X1E platforms
On some Qualcomm X1E platforms, such as the Lenovo ThinkPad T14s, the
SCMI firmware fails to set the FastChannel support bit for PERF_LEVEL_GET,
yet it crashes when the driver attempts to fall back to standard messaging
which is clearly out-of-spec behavior.
To work around this, the new SCMI quirk framework is used to
unconditionally enable FC initialization for this firmware version.
In the future, once the fixed firmware version is identified, an upper
version bound can be added to the quirk match criteria. Alternatively,
matching can be further restricted using a SoC-specific compatible string
if always enabling FC proves problematic elsewhere.
3. Support for NXP i.MX LMM/CPU vendor protocol extensions
The i.MX95 System Manager (SM) implements Logical Machine Management (LMM)
and a CPU protocol to manage Logical Machines (LM) and CPUs (e.g., M7).
These changes integrate the vendor-specific protocol extensions
implementing the LMM and CPU protocols for the i.MX95, facilitating
standardized communication between the operating system and the platform's
firmware, which will be used by remoteproc drivers. The changes also
include the necessary device tree bindings.
4. Miscellaneous cleanups/changes
These mainly include polling support in SCMI raw mode. The cleanups
centralize error logging for SCMI device creation into a single helper
function, consolidate the device matching logic into a single function, and
ensure that devices must have a name for registration—removing support for
unnamed devices when matching drivers and devices for probing. Transport
devices are now excluded from bus matching, and the correct assignment of
the parent device for the arm-scmi platform device is ensured in the
transport drivers.
* tag 'scmi-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: quirk: Force perf level get fastchannel
firmware: arm_scmi: quirk: Fix CLOCK_DESCRIBE_RATES triplet
firmware: arm_scmi: Add common framework to handle firmware quirks
firmware: arm_scmi: Ensure that the message-id supports fastchannel
MAINTAINERS: add entry for i.MX SCMI extensions
firmware: imx: Add i.MX95 SCMI CPU driver
firmware: imx: Add i.MX95 SCMI LMM driver
firmware: arm_scmi: imx: Add i.MX95 CPU Protocol
firmware: arm_scmi: imx: Add i.MX95 LMM protocol
dt-bindings: firmware: Add i.MX95 SCMI LMM and CPU protocol
firmware: arm_scmi: imx: Add LMM and CPU documentation
firmware: arm_scmi: Add polling support to raw mode
firmware: arm_scmi: Exclude transport devices from bus matching
firmware: arm_scmi: Assign correct parent to arm-scmi platform device
firmware: arm_scmi: Refactor error logging from SCMI device creation to single helper
firmware: arm_scmi: Refactor device matching logic to eliminate duplication
firmware: arm_scmi: Ensure scmi_devices are always matched by name as well
Link: https://lore.kernel.org/r/20250507134713.49039-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Several improvements to Exynos ACPM (Alive Clock and Power Manager)
driver:
1. Handle communication timeous better.
2. Avoid sleeping, so users (PMIC) can still transfer during system
shutdown.
3. Fix reading longer messages from them firmware.
4. Deferred probe improvements.
5. Model the user of ACPM - PMIC - a as child device and export
devm_acpm_get_by_node() for such use case.
-----BEGIN PGP SIGNATURE-----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=Nd7d
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CqLR
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.16
Several improvements to Exynos ACPM (Alive Clock and Power Manager)
driver:
1. Handle communication timeous better.
2. Avoid sleeping, so users (PMIC) can still transfer during system
shutdown.
3. Fix reading longer messages from them firmware.
4. Deferred probe improvements.
5. Model the user of ACPM - PMIC - a as child device and export
devm_acpm_get_by_node() for such use case.
* tag 'samsung-drivers-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: Correct kerneldoc and use typical np argument name
firmware: exynos-acpm: introduce devm_acpm_get_by_node()
firmware: exynos-acpm: populate devices from device tree data
firmware: exynos-acpm: silence EPROBE_DEFER error on boot
firmware: exynos-acpm: fix reading longer results
dt-bindings: firmware: google,gs101-acpm-ipc: add PMIC child node
firmware: exynos-acpm: allow use during system shutdown
firmware: exynos-acpm: use ktime APIs for timeout detection
Link: https://lore.kernel.org/r/20250501103541.13795-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The function efi_load_initrd() had a documentation warning due to
the missing description for the 'out' parameter. Add the parameter
description to the kernel-doc comment to resolve the warning and
improve API documentation.
Fixes the following compiler warning:
drivers/firmware/efi/libstub/efi-stub-helper.c:611: warning: Function parameter or struct member 'out' not described in 'efi_load_initrd'
Fixes: f4dc7fffa9 ("efi: libstub: unify initrd loading between architectures")
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Be more informative if memremap fails, and print out physical address
together with size. This change intends to make investigations of such
early failures slightly easier.
Signed-off-by: Bartosz Szczepanek <bsz@amazon.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
SDEI usually initialize with the ACPI table, but on platforms where
ACPI is not used, the SDEI feature can still be used to handle
specific firmware calls or other customized purposes. Therefore, it
is not necessary for ARM_SDE_INTERFACE to depend on ACPI_APEI_GHES.
In commit dc4e8c07e9 ("ACPI: APEI: explicit init of HEST and GHES
in acpi_init()"), to make APEI ready earlier, sdei_init was moved
into acpi_ghes_init instead of being a standalone initcall, adding
ACPI_APEI_GHES dependency to ARM_SDE_INTERFACE. This restricts the
flexibility and usability of SDEI.
This patch corrects the dependency in Kconfig and splits sdei_init()
into two separate functions: sdei_init() and acpi_sdei_init().
sdei_init() will be called by arch_initcall and will only initialize
the platform driver, while acpi_sdei_init() will initialize the
device from acpi_ghes_init() when ACPI is ready. This allows the
initialization of SDEI without ACPI_APEI_GHES enabled.
Fixes: dc4e8c07e9 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()")
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250507045757.2658795-1-quic_hyiwei@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix CPU resume latency constraint units sent to device manager through the
TI SCI API. The device manager expects CPU resume latency to be in msecs
which is passed in with the TI SCI API [1]. CPU latency constraints are
set in userspace using the PM QoS framework which uses usecs as the unit.
Since PM QoS uses usecs for units and the device manager expects msecs as
the unit, TI SCI needs to convert from usecs to msecs before passing to
device manager.
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html#tisci-msg-lpm-set-latency-constraint
Cc: stable@vger.kernel.org
Fixes: a7a15754c7 ("firmware: ti_sci: add CPU latency constraint management")
Signed-off-by: Kendall Willis <k-willis@ti.com>
Link: https://lore.kernel.org/r/20250428205336.2947118-1-k-willis@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The Qualcomm SCP firmware in X1E machines like the Lenovo ThinkPad T14s
does not set the FastChannel supported attribute bit for PERF_LEVEL_GET
but crashes when falling back to regular messaging.
Use the new SCMI quirk framework to force FastChannel initialisation for
this implementation.
Note that we can add an upper bound on the version matching when we
learn which version has a fix (or limit matching using a SoC compatible
string in the unlikely event that always enabling FC causes trouble
somewhere).
Link: https://lore.kernel.org/lkml/Z4Dt8E7C6upVtEGV@hovoldconsulting.com/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Message-Id: <20250430135146.5154-1-johan+linaro@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Convert an existing quirk in CLOCK_DESCRIBE_RATES parsing to the new quirk
framework. This is a sort of a peculiar quirk since it matches any platform
and any firmware.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20250429141108.406045-4-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a common framework to describe SCMI quirks and associate them with a
specific platform or a specific set of SCMI firmware versions.
All the matching SCMI quirks will be enabled when the SCMI core stack
probes and after all the needed SCMI firmware versioning information was
retrieved using the base protocol.
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20250429141108.406045-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently the perf and powercap protocol relies on the protocol domain
attributes, which just ensures that one fastchannel per domain, before
instantiating fastchannels for all possible message-ids. Fix this by
ensuring that each message-id supports fastchannel before initialization.
Logs:
| scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:0] - ret:-95. Using regular messaging
| scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:1] - ret:-95. Using regular messaging
| scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:2] - ret:-95. Using regular messaging
CC: stable@vger.kernel.org
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZoQjAWse2YxwyRJv@hovoldconsulting.com/
Fixes: 6f9ea4dabd ("firmware: arm_scmi: Generalize the fast channel support")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
[Cristian: Modified the condition checked to establish support or not]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20250429141108.406045-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The main changes are once more for the NXP i.MX platform, addressing
multiple regressions in recent devicetree updates for the i.MX8MM
and i.MX6ULL SoCs, a PCIe fix for i.MX9 and a MAINTAINERS file update
to disambiguate NXP i.MX SoCs from Sony IMX image sensors.
The stm32 platform devicetree files get some compatibility fixes
for the interrupt controller node.
Another compatibility fix is done for the Arm Morello platform's
cache controller node.
The code changes are all for firmware drivers, fixing kernel-side
bugs on the Arm FF-A and SCMI drivers.
-----BEGIN PGP SIGNATURE-----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=1WdR
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main changes are once more for the NXP i.MX platform, addressing
multiple regressions in recent devicetree updates for the i.MX8MM and
i.MX6ULL SoCs, a PCIe fix for i.MX9 and a MAINTAINERS file update to
disambiguate NXP i.MX SoCs from Sony IMX image sensors.
The stm32 platform devicetree files get some compatibility fixes for
the interrupt controller node.
Another compatibility fix is done for the Arm Morello platform's cache
controller node.
The code changes are all for firmware drivers, fixing kernel-side bugs
on the Arm FF-A and SCMI drivers"
* tag 'soc-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp23 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp23 SoCs
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp21 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp21 SoCs
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp25 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp25 SoCs
arm64: dts: imx8mm-verdin: Link reg_usdhc2_vqmmc to usdhc2
MAINTAINERS: add exclude for dt-bindings to imx entry
ARM: dts: opos6ul: add ksz8081 phy properties
arm64: dts: imx95: Correct the range of PCIe app-reg region
arm64: dts: imx8mp: configure GPU and NPU clocks in nominal DTSI
arm64: dts: morello: Fix-up cache nodes
firmware: arm_ffa: Skip Rx buffer ownership release if not acquired
firmware: arm_scmi: Fix timeout checks on polling path
firmware: arm_scmi: Balance device refcount when destroying devices
Merge series from Olivier Moysan <olivier.moysan@foss.st.com>:
This patchset adds some checks on kernel minimum rate requirements.
This avoids potential clock rate misconfiguration, when setting the
kernel frequency on STM32MP2 SoCs.
A fix that addresses incorrect release of Rx buffer ownership in the
driver. The fix specificially avoids releasing Rx buffer ownership with
FFA_RX_RELEASE if it wasn’t acquired during a FFA_PARTITION_INFO_GET call
that only requested the partition count. This prevents unnecessary errors
like FFA_RET_DENIED from firmware when buffers are not actually owned by
the driver.
-----BEGIN PGP SIGNATURE-----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=e5sa
-----END PGP SIGNATURE-----
Merge tag 'ffa-fix-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.15
A fix that addresses incorrect release of Rx buffer ownership in the
driver. The fix specificially avoids releasing Rx buffer ownership with
FFA_RX_RELEASE if it wasn’t acquired during a FFA_PARTITION_INFO_GET call
that only requested the partition count. This prevents unnecessary errors
like FFA_RET_DENIED from firmware when buffers are not actually owned by
the driver.
* tag 'ffa-fix-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Skip Rx buffer ownership release if not acquired
Couple of fixes addressing issues with timeout in the polling path
and device reference count imbalance detected by kmemleak.
1. The change fixes a timeout issue in the polling path of SCMI transactions
where false positives could occur if the polling thread was pre-empted,
causing it to appear as though a timeout occurred when it hadn't. The fix
ensures that the polling result is verified before reporting a timeout,
accounting for potential pre-emption or out-of-order replies.
2. It also corrects a device reference count imbalance caused by
device_find_child() during device destruction, which prevented proper
cleanup and triggered memory leaks detected by KMemleak.
-----BEGIN PGP SIGNATURE-----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=JEKv
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.15
Couple of fixes addressing issues with timeout in the polling path
and device reference count imbalance detected by kmemleak.
1. The change fixes a timeout issue in the polling path of SCMI transactions
where false positives could occur if the polling thread was pre-empted,
causing it to appear as though a timeout occurred when it hadn't. The fix
ensures that the polling result is verified before reporting a timeout,
accounting for potential pre-emption or out-of-order replies.
2. It also corrects a device reference count imbalance caused by
device_find_child() during device destruction, which prevented proper
cleanup and triggered memory leaks detected by KMemleak.
* tag 'scmi-fixes-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix timeout checks on polling path
firmware: arm_scmi: Balance device refcount when destroying devices
Fix a reference counter leak in psci_dt_init() where of_node_put(np) was
missing after of_find_matching_node_and_match() when np is unavailable.
Fixes: d09a0011ec ("drivers: psci: Allow PSCI node to be disabled")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250318151712.28763-1-linmq006@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Here are some small char/misc driver fixes to resolve reported problems
for 6.15-rc4. Included in here are:
- misc chrdev region range fix reported by many people
- nvmem driver fixes and dt updates
- mei new device id and fixes
- comedi driver fix
- pps driver fix
- binder debug log fix
- pci1xxxx driver fixes
- firmware driver fix
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaAuQlQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylrkQCgpZWWeKwuMlH4Lec6E16K3GXbuSAAn2Tr4MKM
D2xY4nHBgBi2d2Oj9C7P
=LJP6
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes to resolve reported
problems for 6.15-rc4. Included in here are:
- misc chrdev region range fix reported by many people
- nvmem driver fixes and dt updates
- mei new device id and fixes
- comedi driver fix
- pps driver fix
- binder debug log fix
- pci1xxxx driver fixes
- firmware driver fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
firmware: stratix10-svc: Add of_platform_default_populate()
mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type
mei: vsc: Fix fortify-panic caused by invalid counted_by() use
pps: generators: tio: fix platform_set_drvdata()
mcb: fix a double free bug in chameleon_parse_gdd()
misc: microchip: pci1xxxx: Fix incorrect IRQ status handling during ack
misc: microchip: pci1xxxx: Fix Kernel panic during IRQ handler registration
char: misc: register chrdev region with all possible minors
mei: me: add panther lake H DID
comedi: jr3_pci: Fix synchronous deletion of timer
binder: fix offset calculation in debug log
intel_th: avoid using deprecated page->mapping, index fields
dt-bindings: nvmem: Add compatible for MSM8960
dt-bindings: nvmem: Add compatible for IPQ5018
nvmem: qfprom: switch to 4-byte aligned reads
nvmem: core: update raw_len if the bit reading is required
nvmem: core: verify cell's raw_len
nvmem: core: fix bit offsets of more than one byte
dt-bindings: nvmem: fixed-cell: increase bits start value to 31
dt-bindings: nvmem: Add compatible for MS8937
...
Correct kerneldoc warnings after commit a8dc26a0ec ("firmware:
exynos-acpm: introduce devm_acpm_get_by_node()") changed the function
prototype:
exynos-acpm.c:672: warning: Function parameter or struct member 'acpm_np' not described in 'acpm_get_by_node'
exynos-acpm.c:672: warning: expecting prototype for acpm_get_by_phandle(). Prototype was for acpm_get_by_node() instead
While touching the lines, change the name of device_node pointer to
'np' to match convention.
Fixes: a8dc26a0ec ("firmware: exynos-acpm: introduce devm_acpm_get_by_node()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504222051.7TqaSQ48-lkp@intel.com/
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250424203308.402168-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To allow ACPM clients to simply be children of the ACPM node in DT,
they need to be able to get the ACPM handle based on that ACPM node
directly.
Add an API to allow them to do so, devm_acpm_get_by_node().
At the same time, the previous approach of acquiring the ACPM handle
via a DT phandle is now obsolete and we can remove
devm_acpm_get_by_phandle(), which was there to facilitate that. There
are no existing or anticipated upcoming users of that API, because all
clients should be children of the ACPM node going forward.
Note that no DTs have been merged that use the old approach, so doing
this API change in this driver now will not affect any existing DTs or
client drivers.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250327-acpm-children-v1-2-0afe15ee2ff7@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ACPM clients (PMIC, clocks, etc.) will be modeled as children of the
ACPM interface. Populate children platform_devices from device tree.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250327-acpm-children-v1-1-0afe15ee2ff7@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This driver emits error messages when client drivers are trying to get
an interface handle to this driver here before this driver has
completed _probe().
Given this driver returns -EPROBE_DEFER in that case, this is not an
error and shouldn't be emitted to the log, similar to how
dev_err_probe() behaves, so just remove them.
This change also allows us to simplify the logic around releasing of
the acpm_np handle.
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250319-acpm-fixes-v2-2-ac2c1bcf322b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ACPM commands that return more than 8 bytes currently don't work
correctly, as this driver ignores any such returned bytes.
This is evident in at least acpm_pmic_bulk_read(), where up to 8
registers can be read back and those 8 register values are placed
starting at &xfer->rxd[8].
The reason is that xfter->rxlen is initialized with the size of a
pointer (8 bytes), rather than the size of the byte array that pointer
points to (16 bytes)
Update the code such that we set the number of bytes expected to be the
size of the rx buffer.
Note1: While different commands have different lengths rx buffers, we
have to specify the same length for all rx buffers since acpm_get_rx()
assumes they're all the same length.
Note2: The different commands also have different lengths tx buffers,
but before switching the code to use the minimum possible length, some
more testing would have to be done to ensure this works correctly in
all situations. It seems wiser to just apply this fix here without
additional logic changes for now.
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250319-acpm-fixes-v2-1-ac2c1bcf322b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In particular we need this fix before applying subsequent changes:
d54d610243 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A collection of small fixes since the previous PR. All are
device-specific like quirks, new IDs, and other safe (or rather
boring) changes.
-----BEGIN PGP SIGNATURE-----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=MjEv
-----END PGP SIGNATURE-----
Merge tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific like quirks, new
IDs, and other safe (or rather boring) changes"
* tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version
ASoC: codecs: Add of_match_table for aw888081 driver
ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event
mailmap: Add entry for Srinivas Kandagatla
MAINTAINERS: use kernel.org alias
ASoC: cs42l43: Reset clamp override on jack removal
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/cirrus_scodec_test: Don't select dependencies
ALSA: azt2320: Replace deprecated strcpy() with strscpy()
ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry
ASoC: Intel: avs: Constrain path based on BE capabilities
ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware()
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
ASoC: fsl_asrc_dma: get codec or cpu dai from backend
ASoC: qcom: Fix sc7280 lpass potential buffer overflow
ASoC: dwc: always enable/disable i2s irqs
ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16
ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate
Add sanity checking to some test harness functions to help catch bugs
in the test code. This consists of checking the range of some arguments
and checking that reads from the dummy regmap succeed.
Most of the harness code already had sanity-checking but there were a
few places where it was missing or was assumed that the test could be
trusted to pass valid values.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250416122422.783215-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add of_platform_default_populate() to stratix10-svc
driver as the firmware/svc node was moved out of soc.
This fixes the failed probing of child drivers of
svc node.
Cc: stable@vger.kernel.org
Fixes: 23c3ebed38 ("arm64: dts: socfpga: agilex: move firmware out of soc node")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20250326115446.36123-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i.MX95 System manager exports SCMI CPU protocol for linux to manage
cpu cores. The driver is to use the cpu Protocol interface to
start, stop a cpu cores (eg, M7).
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-6-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The i.MX95 System manager exports SCMI LMM protocol for linux to manage
Logical Machines. The driver is to use the LMM Protocol interface to
boot, shutdown a LM.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-5-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series fixes the KConfig for cs_dsp and cs-amp-lib tests so that
CONFIG_KUNIT_ALL_TESTS doesn't cause them to add modules to the build.
This protocol allows an agent to start, stop a CPU or set reset vector. It
is used to manage auxiliary CPUs in an LM (e.g. additional cores in an AP
cluster).
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-4-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add Logical Machine Management(LMM) protocol which is intended for boot,
shutdown, and reset of other logical machines (LM). It is usually used to
allow one LM to manager another used as an offload or accelerator engine.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-3-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Provide a couple of additional debugfs entries to enable polling-mode on
the waiting path of injected messages: message_poll will cause the system
to poll while waiting for the reply, while message_poll_async will send an
asynchronous message, as usual, and will use polling mode for the immediate
synchronous part of the async command.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20250310180811.1463539-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Transport devices are currently being unintentionally matched to
drivers with the same name, allowing their probe function to be
invoked. However, the bus notifier prevents them from setting up
handles, rendering them unable to utilize SCMI core functionality.
Instead of relying on the bus notifier which can't prevent bus matching
even if it returns early or error, move the check into the bus matching
logic itself. This change ensures that transport devices are entirely
excluded from driver matching, preventing any unintended probe attempts.
Message-Id: <20250317-b4-scmi_minor_cleanup-v2-5-f4be99bd9864@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
With the decoupling of transport drivers from the SCMI core, the
"arm-scmi" platform device is now created dynamically from the probed
transport driver.
Currently, this "arm-scmi" platform device is added to the root of
the platform bus since no parent is assigned. However, the transport
platform device, created from the "firmware:scmi" node in the device
tree, should be considered its parent.
Ensure that the parent device is correctly set for the "arm-scmi"
platform device, aligning it with the correct transport hierarchy.
This will be more useful on systems with multiple transport and/or
SCMI firmware instances as the hierarchy is maintained correctly.
Message-Id: <20250317-b4-scmi_minor_cleanup-v2-4-f4be99bd9864@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Refactors the error logging related to SCMI device creation. The goal
is to remove duplicated error-handling code and centralize it into a
single helper function: _scmi_device_create().
By doing so, any code redundancy around error logging is avoided, as
error logging during device creation will now be handled by a unified
helper function.
Message-Id: <20250317-b4-scmi_minor_cleanup-v2-3-f4be99bd9864@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently, the device matching logic is duplicated in two functions:
- scmi_dev_match() used by the scmi_bus to match scmi_devices with
scmi_drivers.
- scmi_child_dev_find() used to check for the presence of a device
with the same name and protocol_id to avoid adding duplicates to
the bus.
Refactor the code to eliminate the redundant matching logic and
consolidates the functionality for better maintainability and efficiency.
Message-Id: <20250317-b4-scmi_minor_cleanup-v2-2-f4be99bd9864@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently, devices without a name in the id_table cannot register drivers,
and no scmi_device is created without a name via scmi_device_create().
However, the function __scmi_device_create() allows devices with no name,
which are then labeled as "unknown."
Removes support for matching scmi_device instances without a name,
ensuring consistency across the driver registration and probing process.
Message-Id: <20250317-b4-scmi_minor_cleanup-v2-1-f4be99bd9864@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
drm-misc-next for v6.16-rc1:
UAPI Changes:
- Add ASAHI uapi header!
- Add apple fourcc modifiers.
- Add capset virtio definitions to UAPI.
- Extend EXPORT_SYNC_FILE for timeline syncobjs.
Cross-subsystem Changes:
- Adjust DMA-BUF sg handling to not cache map on attach.
- Update drm/ci, hlcdc, virtio, maintainers.
- Update fbdev todo.
- Allow setting dma-device for dma-buf import.
- Export efi_mem_desc_lookup to make efidrm build as a module.
Core Changes:
- Update drm scheduler docs.
- Use the correct resv object in TTM delayed destroy.
- Fix compiler warning with panic qr code, and other small fixes.
- drm/ci updates.
- Add debugfs file for listing all bridges.
- Small fixes to drm/client, ttm tests.
- Add documentation to display/hdmi.
- Add kunit tests for bridges.
- Dont fail managed device probing if connector polling fails.
- Create Kconfig.debug for drm core.
- Add tests for the drm scheduler.
- Add and use new access helpers for DPCPD.
- Add generic and optimized conversions for format-helper.
- Begin refcounting panel for improving lifetime handling.
- Unify simpledrm and ofdrm sysfb, and add extra features.
- Split hdmi audio in bridge to make DP audio work.
Driver Changes:
- Convert drivers to use devm_platform_ioremap_resource().
- Assorted small fixes to imx/legacy-bridg, gma500, pl111, nouveau, vc4,
vmwgfx, ast, mxsfb, xlnx, accel/qaic, v3d, bridge/imx8qxp-ldb, ofdrm,
bridge/fsl-ldb, udl, bridge/ti-sn65dsi86, bridge/anx7625, cirrus-qemu,
bridge/cdns-dsi, panel/sharp, panel/himax, bridge/sil902x, renesas,
imagination, various panels.
- Allow attaching more display to vkms.
- Add Powertip PH128800T004-ZZA01 panel.
- Add rotation quirk for ZOTAC panel.
- Convert bridge/tc358775 to atomic.
- Remove deprecated panel calls from synaptics, novatek, samsung panels.
- Refactor shmem helper page pinning and accel drivers using it.
- Add dmabuf support to accel/amdxdna.
- Use 4k page table format for panfrost/mediatek.
- Add common powerup/down dp link helper and use it.
- Assorted compiler warning fixes.
- Support dma-buf import for renesas
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# include/drm/drm_kunit_helpers.h
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/e147ff95-697b-4067-9e2e-7cbd424e162a@linux.intel.com
FW_CS_DSP gets enabled if KUNIT is enabled. The test should rather
depend on if the feature is enabled. Fix this by moving FW_CS_DSP to the
depends on clause.
Fixes: dd0b6b1f29 ("firmware: cs_dsp: Add KUnit testing of bin file download")
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250411123608.1676462-4-rf@opensource.cirrus.com
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Call cs_dsp_mock_xm_header_get_fw_version() to get the firmware version
from the dummy XM header data in cs_dsp_bin_err_test_common_init().
Make the same change to cs_dsp_bin_test_common_init() and remove the
cs_dsp_mock_xm_header_get_fw_version_from_regmap() function.
The code in cs_dsp_test_bin.c was correctly calling
cs_dsp_mock_xm_header_get_fw_version_from_regmap() to fetch the fw version
from a dummy header it wrote to XM registers. However in
cs_dsp_test_bin_error.c the test doesn't stuff a dummy header into XM, it
populates it the normal way using a wmfw file. It should have called
cs_dsp_mock_xm_header_get_fw_version() to get the data from its blob
buffer, but was calling cs_dsp_mock_xm_header_get_fw_version_from_regmap().
As nothing had been written to the registers this returned the value of
uninitialized data.
The only other use of cs_dsp_mock_xm_header_get_fw_version_from_regmap()
was cs_dsp_test_bin.c, but it doesn't need to use it. It already has a
blob buffer containing the dummy XM header so it can use
cs_dsp_mock_xm_header_get_fw_version() to read from that.
Fixes: cd8c058499 ("firmware: cs_dsp: Add KUnit testing of bin error cases")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250410132129.1312541-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Building efidrm as module requires efi_mem_desc_lookup(). Export
the symbol.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250408091837.407401-2-tzimmermann@suse.de
* Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
* Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
* Fix KVM guest driver to match PV CPUID hypercall ABI.
* Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
s390:
* Don't use %pK for debug printing and tracepoints.
x86:
* Use a separate subclass when acquiring KVM's per-CPU posted interrupts
wakeup lock in the scheduled out path, i.e. when adding a vCPU on
the list of vCPUs to wake, to workaround a false positive deadlock.
The schedule out code runs with a scheduler lock that the wakeup
handler takes in the opposite order; but it does so with IRQs disabled
and cannot run concurrently with a wakeup.
* Explicitly zero-initialize on-stack CPUID unions
* Allow building irqbypass.ko as as module when kvm.ko is a module
* Wrap relatively expensive sanity check with KVM_PROVE_MMU
* Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
* Add more scenarios to the MONITOR/MWAIT test.
* Add option to rseq test to override /dev/cpu_dma_latency
* Bring list of exit reasons up to date
* Cleanup Makefile to list once tests that are valid on all architectures
Other:
* Documentation fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmf083IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN1dgf/QwfpZcHoMNQSnrc1jMy2LHrArln2
XfmsOGZTU7kyoLQsLWGAPNocOveGdiemTDsj5ZXoNMnqV8hCBr+tZuv2gWI1rr/o
kiGerdIgSZ9piTjBlJkVAaOzbWhg2DUnr7qVVzEzFY9+rPNyQ81vgAfU7h56KhYB
optecozmBrHHAxvQZwmPeL9UyPWFjOF1BY/8LTMx7X+aVuCX6qx1JqO3a3ylAw4J
tGXv6qFJfuCnu1d1b4X0ILce0iMUTOjQzvTcIm+BKjYycecl+3j1aczC/BOorIgc
mf0+XeauhcTduK73pirnvx2b05eOxntgkOpwJytO2RP6pE0uK+2Th/C3Qg==
=ba/Y
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
Completion of the FFA_PARTITION_INFO_GET ABI transfers the ownership of
the caller’s Rx buffer from the producer(typically partition mnager) to
the consumer(this driver/OS). FFA_RX_RELEASE transfers the ownership
from the consumer back to the producer.
However, when we set the flag to just return the count of partitions
deployed in the system corresponding to the specified UUID while
invoking FFA_PARTITION_INFO_GET, the Rx buffer ownership shouldn't be
transferred to this driver. We must be able to skip transferring back
the ownership to the partition manager when we request just to get the
count of the partitions as the buffers are not acquired in this case.
Firmware may return FFA_RET_DENIED or other error for the ffa_rx_release()
in such cases.
Fixes: bb1be74985 ("firmware: arm_ffa: Add v1.1 get_partition_info support")
Message-Id: <20250321115700.3525197-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Polling mode transactions wait for a reply busy-looping without holding a
spinlock, but currently the timeout checks are based only on elapsed time:
as a result we could hit a false positive whenever our busy-looping thread
is pre-empted and scheduled out for a time greater than the polling
timeout.
Change the checks at the end of the busy-loop to make sure that the polling
wasn't indeed successful or an out-of-order reply caused the polling to be
forcibly terminated.
Fixes: 31d2f803c1 ("firmware: arm_scmi: Add sync_cmds_completed_on_ret transport flag")
Reported-by: Huangjie <huangjie1663@phytium.com.cn>
Closes: https://lore.kernel.org/arm-scmi/20250123083323.2363749-1-jackhuang021@gmail.com/
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Cc: stable@vger.kernel.org # 5.18.x
Message-Id: <20250310175800.1444293-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Using device_find_child() to lookup the proper SCMI device to destroy
causes an unbalance in device refcount, since device_find_child() calls an
implicit get_device(): this, in turns, inhibits the call of the provided
release methods upon devices destruction.
As a consequence, one of the structures that is not freed properly upon
destruction is the internal struct device_private dev->p populated by the
drivers subsystem core.
KMemleak detects this situation since loading/unloding some SCMI driver
causes related devices to be created/destroyed without calling any
device_release method.
unreferenced object 0xffff00000f583800 (size 512):
comm "insmod", pid 227, jiffies 4294912190
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 60 36 1d 8a 00 80 ff ff ........`6......
backtrace (crc 114e2eed):
kmemleak_alloc+0xbc/0xd8
__kmalloc_cache_noprof+0x2dc/0x398
device_add+0x954/0x12d0
device_register+0x28/0x40
__scmi_device_create.part.0+0x1bc/0x380
scmi_device_create+0x2d0/0x390
scmi_create_protocol_devices+0x74/0xf8
scmi_device_request_notifier+0x1f8/0x2a8
notifier_call_chain+0x110/0x3b0
blocking_notifier_call_chain+0x70/0xb0
scmi_driver_register+0x350/0x7f0
0xffff80000a3b3038
do_one_initcall+0x12c/0x730
do_init_module+0x1dc/0x640
load_module+0x4b20/0x5b70
init_module_from_file+0xec/0x158
$ ./scripts/faddr2line ./vmlinux device_add+0x954/0x12d0
device_add+0x954/0x12d0:
kmalloc_noprof at include/linux/slab.h:901
(inlined by) kzalloc_noprof at include/linux/slab.h:1037
(inlined by) device_private_init at drivers/base/core.c:3510
(inlined by) device_add at drivers/base/core.c:3561
Balance device refcount by issuing a put_device() on devices found via
device_find_child().
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/linux-arm-kernel/Z8nK3uFkspy61yjP@arm.com/T/#mc1f73a0ea5e41014fa145147b7b839fc988ada8f
CC: Sudeep Holla <sudeep.holla@arm.com>
CC: Catalin Marinas <catalin.marinas@arm.com>
Fixes: d4f9dddd21 ("firmware: arm_scmi: Add dynamic scmi devices creation")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Message-Id: <20250306185447.2039336-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Move the calculation of the bits per pixels for screen_info into a
helper function. This will make it available to other callers besides
the firmware code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-14-tzimmermann@suse.de
We need to access the PMIC during late system shutdown and at that time
we are not allowed to sleep anymore.
To make this case work, and since we can't detect this case in a
non-racy way, switch to using udelay() unconditionally, instead of
usleep_range().
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250325-acpm-atomic-v3-2-c66aae7df925@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
acpm_dequeue_by_polling() uses a loop counter and assumes that each
iteration of the loop takes 20us. It may take longer, though, because
usleep_range() may sleep a different amount.
Switch to using ktime_get() / ktime_before() to detect the timeout
condition more reliably.
This change also makes the code easier to follow and it allows us to
adjust the sleep if necessary, without having to adjust the loop
counter exit condition.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250325-acpm-atomic-v3-1-c66aae7df925@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
When we're polling for responses and get a response that corresponds to
another request, we save the RX data in order to drain the RX queue.
If the response for the current request is not found in the request's
iteration of the queue, or if the queue is empty, we must check whether
the RX data was saved by a previous request when it drained the RX queue.
We failed to check for already saved responses when the queue was empty,
and requests could time out. Check saved RX before bailing out on empty
RX queue.
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Reported-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Tested-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250324-acpm-drained-rx-queue-v1-1-577774335151@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Linus expressed a strong preference for arch-specific asm code (i.e.,
virtually all of it) to reside under arch/ rather than anywhere else.
So move the EFI mixed mode startup code back, and put it under
arch/x86/boot/startup/ where all shared x86 startup code is going to
live.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-11-ardb+git@google.com
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A collection of device-specific fixes that have been gathered since
the previous PR.
- A few more HD-audio quirks and fixups
- A series of Qualcomm AudioReach fixes
- Various small fixes for ASoC rt5665, WSA, SOF and Cirrus.
-----BEGIN PGP SIGNATURE-----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=fyLx
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of device-specific fixes that have been gathered since
the previous pull:
- A few more HD-audio quirks and fixups
- A series of Qualcomm AudioReach fixes
- Various small fixes for ASoC rt5665, WSA, SOF and Cirrus"
* tag 'sound-fix-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix built-in mic on another ASUS VivoBook model
ALSA: hda/realtek - Support mute led function for HP platform
ASoC: imx-card: Add NULL check in imx_card_probe()
ASoC: codecs: rt5665: Fix some error handling paths in rt5665_probe()
ASoC: q6apm-dai: make use of q6apm_get_hw_pointer
ASoC: qdsp6: q6apm-dai: fix capture pipeline overruns.
ASoC: qdsp6: q6apm-dai: set 10 ms period and buffer alignment.
ASoC: q6apm: add q6apm_get_hw_pointer helper
ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs
ASoC: SOF: hda/ptl: Move mic privacy change notification sending to a work
ALSA/hda: intel-sdw-acpi: Remove (explicitly) unused header
ALSA: hda/realtek: Enable Mute LED on HP OMEN 16 Laptop xd000xx
ALSA: hda/tas2781: Upgrade calibratd-data writing code to support Alpha and Beta dsp firmware
ASoC: qdsp6: q6asm-dai: fix q6asm_dai_compr_set_params error path
ALSA: hda/realtek: Fix built-in mic breakage on ASUS VivoBook X515JA
ASoC: sma1307: Fix error handling in sma1307_setting_loaded()
ASoC: codecs: wsa884x: Correct VI sense channel mask
ASoC: codecs: wsa883x: Correct VI sense channel mask
firmware: cs_dsp: Ensure cs_dsp_load[_coeff]() returns 0 on success
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and remove gotos for error
handling.
- Some followup patches to support dirty shutdown accounting
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands. Mostly in preparation for CXL EDAC
code to utilize the Features commands. It's also in preparation for CXL fwctl support
to utilize the CXL Features. The commands include "Get Supported Features", "Get Feature",
and "Set Feature".
- A series to support extended linear cache support described by the ACPI HMAT table. The
addition helps enumerate the cache and also provides additional RAS reporting support for
configuration with extended linear cache. (and related fixes for the
series).
- An update to cxl_test to support a 3-way capable CFMWS.
- A documentation fix to remove unused "mixed mode".
-----BEGIN PGP SIGNATURE-----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=ZME1
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250326040659.1190696-1-nichen@iscas.ac.cn
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
The ABI of the hypercall requires that R2 and R3 are 0. Explicitly pass
0 for these parameters.
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Fixes: 86edf6bdcf ("smccc/kvm_guest: Enable errata based on implementation CPUs")
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250327163613.2516073-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
- Decouple mixed mode startup code from the traditional x86 decompressor
- Revert zero-length file hack in efivarfs
- Prevent EFI zboot from using the CopyMem/SetMem boot services after
ExitBootServices()
- Update EFI zboot to use the ZLIB/ZSTD library interfaces directly
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ9vAPwAKCRAwbglWLn0t
XNsFAQCq4zXmbHnFl8gR3rq06f2gR3DKPfUBGVnyfaP/77ag0AD6Alzm4Pg014cL
GsZPQf38uGnygMTGYsU1HdE8EugFFQY=
=UXC0
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Decouple mixed mode startup code from the traditional x86
decompressor
- Revert zero-length file hack in efivarfs
- Prevent EFI zboot from using the CopyMem/SetMem boot services after
ExitBootServices()
- Update EFI zboot to use the ZLIB/ZSTD library interfaces directly
* tag 'efi-next-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: Avoid legacy decompressor zlib/zstd wrappers
efi/libstub: Avoid CopyMem/SetMem EFI services after ExitBootServices
efi: efibc: change kmalloc(size * count, ...) to kmalloc_array()
efivarfs: Revert "allow creation of zero length files"
x86/efi/mixed: Move mixed mode startup code into libstub
x86/efi/mixed: Simplify and document thunking logic
x86/efi/mixed: Remove dependency on legacy startup_32 code
x86/efi/mixed: Set up 1:1 mapping of lower 4GiB in the stub
x86/efi/mixed: Factor out and clean up long mode entry
x86/efi/mixed: Check CPU compatibility without relying on verify_cpu()
x86/efistub: Merge PE and handover entrypoints
These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware interfaces,
adding support for additional firmware features including SoC
identification and FF-A SRI callbacks as well as various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and Apple chips
There will be a follow up with a few more driver updates that are still
causing build regressions at the moment.
-----BEGIN PGP SIGNATURE-----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=QcjY
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
We've received lots of commits at this time, as a result of various
cleanup and refactoring works as well as a few new drivers and the
generic SoundWire support. Most of changes are device-specific,
little about the core changes. Some highlights below:
Core:
* A couple of (rather minor) race fixes in ALSA sequencer code
* A regression fix in ALSA timer code that may lead to a deadlock
ASoC:
* A large series of code conversion to use modern terminology for the
clocking configuration
* Conversions of PM ops with the modern macros in all ASoC drivers
* Clarification of the control operations
* Prepartory work for more generic SoundWire SCDA controls
* Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95,
nVidia Tegra interconnects, Rockchip RK3588 S/PDIF, Texas
Instruments SN012776 and TAS5770L, and Wolfson WM8904 DMICs
Others:
* Conversions of PM ops with the modern macros in the rest drivers
* USB-audio quirks and fixes for Presonus Studio, DJM-A9, CME
* HD-audio quirks and fixes ASUS, HP, Lenovo, and others
Note that the PR contains some changes from the tip tree for AMD code,
and it might give some merge conflict due to the rebase afterwards.
-----BEGIN PGP SIGNATURE-----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=NaAN
-----END PGP SIGNATURE-----
Merge tag 'sound-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received lots of commits at this time, as a result of various
cleanup and refactoring works as well as a few new drivers and the
generic SoundWire support. Most of changes are device-specific, little
about the core changes. Some highlights below:
Core:
- A couple of (rather minor) race fixes in ALSA sequencer code
- A regression fix in ALSA timer code that may lead to a deadlock
ASoC:
- A large series of code conversion to use modern terminology for the
clocking configuration
- Conversions of PM ops with the modern macros in all ASoC drivers
- Clarification of the control operations
- Prepartory work for more generic SoundWire SCDA controls
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95,
nVidia Tegra interconnects, Rockchip RK3588 S/PDIF, Texas
Instruments SN012776 and TAS5770L, and Wolfson WM8904 DMICs
Others:
- Conversions of PM ops with the modern macros in the rest drivers
- USB-audio quirks and fixes for Presonus Studio, DJM-A9, CME
- HD-audio quirks and fixes ASUS, HP, Lenovo, and others"
* tag 'sound-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (651 commits)
ALSA: hda: tas2781-i2c: Remove unnecessary NULL check before release_firmware()
ALSA: hda: cs35l56: Remove unnecessary NULL check before release_firmware()
ALSA: hda/realtek: Bass speaker fixup for ASUS UM5606KA
ALSA: hda/realtek: Fix built-in mic assignment on ASUS VivoBook X515UA
ALSA: hda/realtek: Add support for various HP Laptops using CS35L41 HDA
ALSA: timer: Don't take register_mutex with copy_from/to_user()
ASoC: SDCA: Correct handling of selected mode DisCo property
ASoC: amd: yc: update quirk data for new Lenovo model
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3247
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3315
ASoC: SOF: mediatek: Commonize duplicated functions
ASoC: dmic: Fix NULL pointer dereference
ASoC: wm8904: add DMIC support
ASoC: wm8904: get platform data from DT
ASoC: dt-bindings: wm8904: Add DMIC, GPIO, MIC and EQ support
ASoC: wm8904: Don't touch GPIO configs set to 0xFFFF
of: Add of_property_read_u16_index
ALSA: oxygen: Fix dependency on CONFIG_PM_SLEEP
ASoC: ops: Apply platform_max after deciding control type
ASoC: ops: Remove some unnecessary local variables
...
- Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM
pmdomain providers:
- arm: Remove redundant state verification for the SCMI PM domain
- bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP
- rockchip: Add support for regulators
- rockchip: Use SMC call to properly inform firmware
- sunxi: Add V853 ppu support
- thead: Add support for RISC-V TH1520 power-domains
firmware:
- Add support for the AON firmware protocol for RISC-V THEAD
cpuidle-psci:
- Update section in MAINTAINERS for cpuidle-psci
- Add trace support for PSCI domain-idlestates
-----BEGIN PGP SIGNATURE-----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=Wihe
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM
pmdomain providers:
- arm: Remove redundant state verification for the SCMI PM domain
- bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP
- rockchip: Add support for regulators
- rockchip: Use SMC call to properly inform firmware
- sunxi: Add V853 ppu support
- thead: Add support for RISC-V TH1520 power-domains
firmware:
- Add support for the AON firmware protocol for RISC-V THEAD
cpuidle-psci:
- Update section in MAINTAINERS for cpuidle-psci
- Add trace support for PSCI domain-idlestates"
* tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (29 commits)
firmware: thead: add CONFIG_MAILBOX dependency
firmware: thead,th1520-aon: Fix use after free in th1520_aon_init()
pmdomain: arm: scmi_pm_domain: Remove redundant state verification
pmdomain: thead: fix TH1520_AON_PROTOCOL dependency
pmdomain: thead: Add power-domain driver for TH1520
dt-bindings: power: Add TH1520 SoC power domains
firmware: thead: Add AON firmware protocol driver
dt-bindings: firmware: thead,th1520: Add support for firmware node
pmdomain: rockchip: add regulator dependency
pmdomain: rockchip: add regulator support
pmdomain: rockchip: fix rockchip_pd_power error handling
pmdomain: rockchip: reduce indentation in rockchip_pd_power
pmdomain: rockchip: forward rockchip_do_pmu_set_power_domain errors
pmdomain: rockchip: cleanup mutex handling in rockchip_pd_power
dt-bindings: power: rockchip: add regulator support
pmdomain: rockchip: Fix build error
pmdomain: imx: gpcv2: use proper helper for property detection
MAINTAINERS: Update section for cpuidle-psci
pmdomain: rockchip: Check if SMC could be handled by TA
cpuidle: psci: Add trace for PSCI domain idle
...
* Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
* Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
* Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
* Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
* Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
* pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
* Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
* Remove unnecessary header include path
* Assume constant PGD during VM context switch
* Add perf events support for guest VM
RISC-V:
* Disable the kernel perf counter during configure
* KVM selftests improvements for PMU
* Fix warning at the time of KVM module removal
x86:
* Add support for aging of SPTEs without holding mmu_lock. Not taking mmu_lock
allows multiple aging actions to run in parallel, and more importantly avoids
stalling vCPUs. This includes an implementation of per-rmap-entry locking;
aging the gfn is done with only a per-rmap single-bin spinlock taken, whereas
locking an rmap for write requires taking both the per-rmap spinlock and
the mmu_lock.
Note that this decreases slightly the accuracy of accessed-page information,
because changes to the SPTE outside aging might not use atomic operations
even if they could race against a clear of the Accessed bit. This is
deliberate because KVM and mm/ tolerate false positives/negatives for
accessed information, and testing has shown that reducing the latency of
aging is far more beneficial to overall system performance than providing
"perfect" young/old information.
* Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
* Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
* Drop "support" for async page faults for protected guests that do not set
SEND_ALWAYS (i.e. that only want async page faults at CPL3)
* Bring a bit of sanity to x86's VM teardown code, which has accumulated
a lot of cruft over the years. Particularly, destroy vCPUs before
the MMU, despite the latter being a VM-wide operation.
* Add common secure TSC infrastructure for use within SNP and in the
future TDX
* Block KVM_CAP_SYNC_REGS if guest state is protected. It does not make
sense to use the capability if the relevant registers are not
available for reading or writing.
* Don't take kvm->lock when iterating over vCPUs in the suspend notifier to
fix a largely theoretical deadlock.
* Use the vCPU's actual Xen PV clock information when starting the Xen timer,
as the cached state in arch.hv_clock can be stale/bogus.
* Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across different
PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as KVM's suspend
notifier only accounts for kvmclock, and there's no evidence that the
flag is actually supported by Xen guests.
* Clean up the per-vCPU "cache" of its reference pvclock, and instead only
track the vCPU's TSC scaling (multipler+shift) metadata (which is moderately
expensive to compute, and rarely changes for modern setups).
* Don't write to the Xen hypercall page on MSR writes that are initiated by
the host (userspace or KVM) to fix a class of bugs where KVM can write to
guest memory at unexpected times, e.g. during vCPU creation if userspace has
set the Xen hypercall MSR index to collide with an MSR that KVM emulates.
* Restrict the Xen hypercall MSR index to the unofficial synthetic range to
reduce the set of possible collisions with MSRs that are emulated by KVM
(collisions can still happen as KVM emulates Hyper-V MSRs, which also reside
in the synthetic range).
* Clean up and optimize KVM's handling of Xen MSR writes and xen_hvm_config.
* Update Xen TSC leaves during CPUID emulation instead of modifying the CPUID
entries when updating PV clocks; there is no guarantee PV clocks will be
updated between TSC frequency changes and CPUID emulation, and guest reads
of the TSC leaves should be rare, i.e. are not a hot path.
x86 (Intel):
* Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and thus
modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1.
* Pass XFD_ERR as the payload when injecting #NM, as a preparatory step
for upcoming FRED virtualization support.
* Decouple the EPT entry RWX protection bit macros from the EPT Violation
bits, both as a general cleanup and in anticipation of adding support for
emulating Mode-Based Execution Control (MBEC).
* Reject KVM_RUN if userspace manages to gain control and stuff invalid guest
state while KVM is in the middle of emulating nested VM-Enter.
* Add a macro to handle KVM's sanity checks on entry/exit VMCS control pairs
in anticipation of adding sanity checks for secondary exit controls (the
primary field is out of bits).
x86 (AMD):
* Ensure the PSP driver is initialized when both the PSP and KVM modules are
built-in (the initcall framework doesn't handle dependencies).
* Use long-term pins when registering encrypted memory regions, so that the
pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and don't lead to
excessive fragmentation.
* Add macros and helpers for setting GHCB return/error codes.
* Add support for Idle HLT interception, which elides interception if the vCPU
has a pending, unmasked virtual IRQ when HLT is executed.
* Fix a bug in INVPCID emulation where KVM fails to check for a non-canonical
address.
* Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is invalid, e.g.
because the vCPU was "destroyed" via SNP's AP Creation hypercall.
* Reject SNP AP Creation if the requested SEV features for the vCPU don't
match the VM's configured set of features.
Selftests:
* Fix again the Intel PMU counters test; add a data load and do CLFLUSH{OPT} on the data
instead of executing code. The theory is that modern Intel CPUs have
learned new code prefetching tricks that bypass the PMU counters.
* Fix a flaw in the Intel PMU counters test where it asserts that an event is
counting correctly without actually knowing what the event counts on the
underlying hardware.
* Fix a variety of flaws, bugs, and false failures/passes dirty_log_test, and
improve its coverage by collecting all dirty entries on each iteration.
* Fix a few minor bugs related to handling of stats FDs.
* Add infrastructure to make vCPU and VM stats FDs available to tests by
default (open the FDs during VM/vCPU creation).
* Relax an assertion on the number of HLT exits in the xAPIC IPI test when
running on a CPU that supports AMD's Idle HLT (which elides interception of
HLT if a virtual IRQ is pending and unmasked).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfcTkEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMnQAf/cPx72hJOdNy4Qrm8M33YLXVRVV00
yEZ8eN8TWdOclr0ltE/w/ELGh/qS4CU8pjURAk0A6lPioU+mdcTn3dPEqMDMVYom
uOQ2lusEHw0UuSnGZSEjvZJsE/Ro2NSAsHIB6PWRqig1ZBPJzyu0frce34pMpeQH
diwriJL9lKPAhBWXnUQ9BKoi1R0P5OLW9ahX4SOWk7cAFg4DLlDE66Nqf6nKqViw
DwEucTiUEg5+a3d93gihdD4JNl+fb3vI2erxrMxjFjkacl0qgqRu3ei3DG0MfdHU
wNcFSG5B1n0OECKxr80lr1Ip1KTVNNij0Ks+w6Gc6lSg9c4PptnNkfLK3A==
=nnCN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
Set ret = 0 on successful completion of the processing loop in
cs_dsp_load() and cs_dsp_load_coeff() to ensure that the function
returns 0 on success.
All normal firmware files will have at least one data block, and
processing this block will set ret == 0, from the result of either
regmap_raw_write() or cs_dsp_parse_coeff().
The kunit tests create a dummy firmware file that contains only the
header, without any data blocks. This gives cs_dsp a file to "load"
that will not cause any side-effects. As there aren't any data blocks,
the processing loop will not set ret == 0.
Originally there was a line after the processing loop:
ret = regmap_async_complete(regmap);
which would set ret == 0 before the function returned.
Commit fe08b7d508 ("firmware: cs_dsp: Remove async regmap writes")
changed the regmap write to a normal sync write, so the call to
regmap_async_complete() wasn't necessary and was removed. It was
overlooked that the ret here wasn't only to check the result of
regmap_async_complete(), it also set the final return value of the
function.
Fixes: fe08b7d508 ("firmware: cs_dsp: Remove async regmap writes")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250323170529.197205-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for digital message signing with the private key stored in
the rWTM secure coprocessor. Turris Mox devices have an ECDSA private
key generated and burned into rWTM eFuses when manufactured. This
private key is not readable from the rWTM, but rWTM firmware allows for
signing messages with it and retrieving the public key.
This is exposed to userspace via the keyctl API.
User can find the key by either looking at /proc/keys or listing the
keyring:
$ cat /proc/keys
0240b221 ... keyring .turris-signing-keys: 1
34ff9ac9 ... turris-si Turris MOX SN 0000000D30000005 rWTM ECDSA ke...
$ keyctl rlist %:.turris-signing-keys
889166537
To get the public key:
$ keyctl read 889166537
67 bytes of data in key:
0201a05c 1a79242b 13f2fc02 b48ffdbb 6ee8d5ba 812d6784 5f04f302 c0894d3e
b93474f9 46235777 5c926fb4 cce89b50 88cf5d10 c07fd9c5 fdcea257 3d8f1c33
1bf826
To sign a message:
$ dd if=/dev/urandom of=msg_to_sign bs=64 count=1
$ keyctl pkey_sign 889166537 0 msg_to_sign >signature
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop the debugfs implementation of the ECDSA message signing, in
preparation for a new implementation via the keyctl() syscall.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Align fpga config status with firmware
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZ9REHwAKCRDKSWXLKUoM
IX9dAJ0TIXsQwogTZedmvPjcQ40AFHUu5ACcD6NzbthO3mw60ZwSCx2hZzy2Ksc=
=i5Fq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=k7+s
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-soc-for-6.15' of https://github.com/Xilinx/linux-xlnx into soc/drivers
arm64: ZynqMP SoC changes for 6.15
- Align fpga config status with firmware
* tag 'zynqmp-soc-for-6.15' of https://github.com/Xilinx/linux-xlnx:
firmware: xilinx: Dont send linux address to get fpga config get status
Link: https://lore.kernel.org/r/CAHTX3d+T+_zvwAVqGO+J_+Yia+wXAGsaEbPi1ye1AUYXoq6dmw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Avoid physical address 0x0 for random page allocations
- Add correct lockdep annotation when traversing efivarfs on resume
- Avoid NULL mount in kernel_file_open() when traversing efivarfs on
resume
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ9u1NQAKCRAwbglWLn0t
XO6wAP4rzFsZ6RjKvqMGVcy2E/ADANrV0hbSoWHL5xQWOfzjbAEAns4gKR3k4UkS
9j0h/yQpyaZ58jRWl2BcPFPc5x5zFQM=
=vUS0
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Here's a final batch of EFI fixes for v6.14.
The efivarfs ones are fixes for changes that were made this cycle.
James's fix is somewhat of a band-aid, but it was blessed by the VFS
folks, who are working with James to come up with something better for
the next cycle.
- Avoid physical address 0x0 for random page allocations
- Add correct lockdep annotation when traversing efivarfs on resume
- Avoid NULL mount in kernel_file_open() when traversing efivarfs on
resume"
* tag 'efi-fixes-for-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: fix NULL dereference on resume
efivarfs: use I_MUTEX_CHILD nested lock to traverse variables on resume
efi/libstub: Avoid physical address 0x0 when doing random allocation
* kvm-arm64/pv-cpuid:
: Paravirtualized implementation ID, courtesy of Shameer Kolothum
:
: Big-little has historically been a pain in the ass to virtualize. The
: implementation ID (MIDR, REVIDR, AIDR) of a vCPU can change at the whim
: of vCPU scheduling. This can be particularly annoying when the guest
: needs to know the underlying implementation to mitigate errata.
:
: "Hyperscalers" face a similar scheduling problem, where VMs may freely
: migrate between hosts in a pool of heterogenous hardware. And yes, our
: server-class friends are equally riddled with errata too.
:
: In absence of an architected solution to this wart on the ecosystem,
: introduce support for paravirtualizing the implementation exposed
: to a VM, allowing the VMM to describe the pool of implementations that a
: VM may be exposed to due to scheduling/migration.
:
: Userspace is expected to intercept and handle these hypercalls using the
: SMCCC filter UAPI, should it choose to do so.
smccc: kvm_guest: Fix kernel builds for 32 bit arm
KVM: selftests: Add test for KVM_REG_ARM_VENDOR_HYP_BMAP_2
smccc/kvm_guest: Enable errata based on implementation CPUs
arm64: Make _midr_in_range_list() an exported function
KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2
KVM: arm64: Specify hypercall ABI for retrieving target implementations
arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
- ti-sci: Default set to ARCH_K3 for the ti sci driver in preperation for
the driver to be default set as module in defconfig.
- k3-socinfo: Explicitly build up regmap instead of depending on syscon
helper
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAmfO6RMACgkQ3bWEnRc2
JJ1mAA/9Ew8sPK9NgVvL/B0r+h1tBOIWHdsVzxVKoewORmHgvthKJbJPpVW/u/4e
YTcqoaFDwaT8RXuRRpH0rYAsVLnC58OsaIVFHCieUrnndFy3QkZRDSlgwqrE9VHS
pEPg+osdHmDkEp3WL6Gz8dxTaEafr1m9Betdr4jN3H0kW6RlH3tYUI3T4yGN3slj
cWF6fGV/muF8i1vre4NzRgHhFjNkd3s4zEQD6QNmQzKrQu61ldwmAmNj26eJeLFA
z1OuNYuihWQtG9bXxT6QQeTnxLeCO9hf6asZQbkaw0jQI14lgd4HMHt1Z/Qx2Q47
ZhXxiMUPLqDUKLesViSr5SiJKavE+NStxLKhafTypXl2fN7/oBLEjaeFDohFfhWh
xI/3m2RGrLwSEKjnNGMiV86JfUS0a/OoUmS8/eDPevffFbGNfy2JB3/wPlESBZUk
AJrH+JcBR+GIASMhp8WmKBt52CWfPZPo7B76ncxx9JCPA79CLIdvqflphoXsiE4l
h8e1+CHPu+E+vOggHzVpuHWIHVb9uGbT0tR7HlUesNNVc8mZIY+XLd2UjeMzYp68
NfakEQTuITA71+WAmnKAvYL+wkbRUpYEaLTiKcGz0P84aG1pKlep7dss1EqcpyzE
ioClxSte7gqvx5P1nKCO9XIB0QY+FSI19M8aAqbkKGPB22SheVM=
=7W9Q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xZeP
-----END PGP SIGNATURE-----
Merge tag 'ti-driver-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.15
- ti-sci: Default set to ARCH_K3 for the ti sci driver in preperation for
the driver to be default set as module in defconfig.
- k3-socinfo: Explicitly build up regmap instead of depending on syscon
helper
* tag 'ti-driver-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: config: ti-sci: Default set to ARCH_K3 for the ti sci driver
soc: ti: k3-socinfo: Do not use syscon helper to build regmap
Link: https://lore.kernel.org/r/20250312113826.ka63nijuftgs6h52@mocker
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Add support for Exynos USI v1 serial engines. Drivers already
supported newer IP blocks - USI v2 - present in Exynos850 and newer.
A bit older ARM64 designs, like Exynos8895 use older USI v1 block.
2. Add Exynos ACPM (Alive Clock and Power Manager) protocol driver
for Google GS101 SoC. ACPM protocol allows communication between the
power management firmware and other embedded processors.
3. Exynos2200: Add PMU, ChipID and SYSREG Devicetree bindings.
4. Exynos7870: Add PMU and ChipID Devicetree bindings.
5. Various cleanups.
-----BEGIN PGP SIGNATURE-----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=cyJK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=uZVK
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.15
1. Add support for Exynos USI v1 serial engines. Drivers already
supported newer IP blocks - USI v2 - present in Exynos850 and newer.
A bit older ARM64 designs, like Exynos8895 use older USI v1 block.
2. Add Exynos ACPM (Alive Clock and Power Manager) protocol driver
for Google GS101 SoC. ACPM protocol allows communication between the
power management firmware and other embedded processors.
3. Exynos2200: Add PMU, ChipID and SYSREG Devicetree bindings.
4. Exynos7870: Add PMU and ChipID Devicetree bindings.
5. Various cleanups.
* tag 'samsung-drivers-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
soc: samsung: include linux/array_size.h where needed
soc: samsung: exynos-chipid: add support for exynos7870
dt-bindings: soc: samsung: exynos-pmu: add exynos7870-pmu compatible
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos7870-chipid compatible
soc: samsung: exynos-chipid: add exynos2200 SoC support
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-pmu: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-sysreg: add sysreg compatibles for exynos2200
firmware: Exynos ACPM: Fix spelling mistake "Faile" -> "Failed"
MAINTAINERS: add entry for the Samsung Exynos ACPM mailbox protocol
firmware: add Exynos ACPM protocol driver
dt-bindings: firmware: add google,gs101-acpm-ipc
soc: samsung: usi: implement support for USIv1 and exynos8895
soc: samsung: usi: add a routine for unconfiguring the ip
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
soc: samsung: Use syscon_regmap_lookup_by_phandle_args
Link: https://lore.kernel.org/r/20250309185601.10616-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Without this, the driver fails to build:
ld: drivers/firmware/thead,th1520-aon.o: in function `th1520_aon_call_rpc':
thead,th1520-aon.c:(.text+0x28): undefined reference to `mbox_send_message'
ld: drivers/firmware/thead,th1520-aon.o: in function `th1520_aon_deinit':
thead,th1520-aon.c:(.text+0x17e): undefined reference to `mbox_free_channel'
ld: drivers/firmware/thead,th1520-aon.o: in function `th1520_aon_init':
thead,th1520-aon.c:(.text+0x1d9): undefined reference to `mbox_request_channel_byname'
Fixes: e4b3cbd840 ("firmware: thead: Add AON firmware protocol driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250314154816.4045334-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes a locking issue in the PDR implementation, which manifest itself
as transaction timeouts during the startup procedure for some
remoteprocs.
A registration race is fixed in the custom efivars implementation,
resolving reported NULL pointer dereferences.
Error handling related to tzmem allocation is corrected, to ensure that
the allocation error is propagated.
Lastly a trivial merge mistake in pmic_glink is addressed.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmfPntcVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FpaAQALArEyFsJ+YpCL6zu89Hc0CAzpdi
cRscXIvR7elGIV5c+/XiSRhsF7nLHJ3NoqI0EC9mLZpG60VRKV3rEtbRAhJUpx9E
SFuFeeq1YYoBwlt4MTIua3cZJB4d0zxrqBMT/EdqmwY7saFCL7S6ElLunClGejwv
Pf/KxnP0eQtwufhyycvlhpKnX5HeynNiI0Nv7fdRlUizWXkiZitH34ZB3rwMrjM8
E264qMz3H8+nc1ZY1Nout6uURDgHXs/kNaUY5KMTP1ntv3a8Xgck6Po91y8jQ52Q
UdE5IcyWG+obI2XBFjZVtCuLNC1E833Si0eIErrFQjePUnv647FEXQwiuxdgyMS+
ky7abqighG8oK8926dB8WHVc8pQ44+I1JT/nylbG6U/wSpoh5NKNSW41b0fjzfmJ
VERTU2muF2KZoI034uXlnx6OH7OSxBUdO3ZeMlGscGA/yzpU8OTuLcHy6miHhKxL
LRaW5nMOm7+yBhGzGVRaxzKeOOo96mx6Vd86ymTbpFOlMxNtVmYP8aldfy9GI6Qx
5cgGqKD4Pn4VTO4qhvxZrLVVO9MHxcN/GTPf3oCeLmhnh4oNpvi9qg77KsfHJJGP
2BHhXN/8dQdagZTMFDlS7z1E9fWTTHIzMMc9YLt11UmpBoOImdDldezxpah7Nu/1
NucMfUBufouasN92
=QoB8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=mQFt
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.14
Fixes a locking issue in the PDR implementation, which manifest itself
as transaction timeouts during the startup procedure for some
remoteprocs.
A registration race is fixed in the custom efivars implementation,
resolving reported NULL pointer dereferences.
Error handling related to tzmem allocation is corrected, to ensure that
the allocation error is propagated.
Lastly a trivial merge mistake in pmic_glink is addressed.
* tag 'qcom-drivers-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pdr: Fix the potential deadlock
firmware: qcom: uefisecapp: fix efivars registration race
firmware: qcom: scm: Fix error code in probe()
soc: qcom: pmic_glink: Drop redundant pg assignment before taking lock
Link: https://lore.kernel.org/r/20250311022509.1232678-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove EFI zboot's dependency on the decompression wrappers used by the
legacy decompressor boot code, which can only process the input in one
go, and this will not work for upcoming support for embedded ELF images.
They also do some odd things like providing a barebones malloc()
implementation, which is not needed in a hosted environment such as the
EFI boot services.
So instead, implement GZIP deflate and ZSTD decompression in terms of
the underlying libraries. Support for other compression algoritms has
already been dropped.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ben reports spurious EFI zboot failures on a system where physical RAM
starts at 0x0. When doing random memory allocation from the EFI stub on
such a platform, a random seed of 0x0 (which means no entropy source is
available) will result in the allocation to be placed at address 0x0 if
sufficient space is available.
When this allocation is subsequently passed on to the decompression
code, the 0x0 address is mistaken for NULL and the code complains and
gives up.
So avoid address 0x0 when doing random allocation, and set the minimum
address to the minimum alignment.
Cc: <stable@vger.kernel.org>
Reported-by: Ben Schneider <ben@bens.haus>
Tested-by: Ben Schneider <ben@bens.haus>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The T-Head TH1520 SoC uses an E902 co-processor running Always-On (AON)
firmware to manage power, clock, and other system resources [1]. This
patch introduces a driver implementing the AON firmware protocol,
allowing the Linux kernel to communicate with the firmware via mailbox
channels. Through an RPC-based interface, the kernel can initiate power
state transitions, update resource configurations, and perform other
AON-related tasks.
[1]
Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20250311171900.1549916-3-m.wilczynski@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Given that memset/memcpy are intrinsics, the compiler might insert calls
to these routines unexpectedly, including in code that executes after
ExitBootServices(). In this case, the respective boot services are no
longer accessible, and calling them will cause a crash.
So fall back to a bytewise copy/store if this happens to occur, even
though no such occurrences are known to exist in the kernel currently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmfOKBUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1aQH/iC+Oyij4VxAjBek
BOXIT/p6CwlIXb8ObiWWcRjDPizlcxb3RaV8J2RO+IqaQ2wltxpFANq2G7Re2FPm
SNcEpIURAOVcxHGedcfFA91srO5F4FzNTO8LVp7MIbcgMYy3pdk+dbZmi6A691R+
t9pb74m+MAnF1o/MUx7pUlhAT/4ymuuR0F7WCSg4h0Xwe5m0nlJY89kJBC7PCjyd
n3mdhsz3rDSLmt/z/T7HGD89r8sYSvm9cOKtL3ELgGTrm7boQV8ii9Y9w04DI8PQ
JmIernugcCxmhH36mVUAHgJf2+/T388xFUh/D5+skeUOUZpaJZG866rnb32WpsHc
eWLFUeg=
=Wypt
-----END PGP SIGNATURE-----
Merge 6.14-rc6 into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The paravirtual implementation ID stuffs is 64-bit only and broke 32bit
arm builds. Slap an ifdef bandaid on the situation to get things rolling
again.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The scmi_common_fastchannel_db_ring() function calls either ioread64()
or ioread64_hi_lo() depending on whether it is compiler for 32-bit
or 64-bit architectures.
The same logic is used to define ioread64() itself in the
linux/io-64-nonatomic-hi-lo.h header file, so the special case
is not really needed.
The behavior here should not change at all.
Fixes: 6f9ea4dabd ("firmware: arm_scmi: Generalize the fast channel support")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250304144346.1025658-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This update primarily focuses on FF-A framework notification support
along with other improvements, including UUID handling enhancements
and various fixes.
1. FF-A framework notification upport
- Adds support for multiple UUIDs per partition to register individual
SRI callbacks.
- Handles Rx buffer full framework notifications and provides a general
interface for future extensions.
2. Improved multiple UUID/services per-partition handling
- Adds support for UUID passing in FFA_MSG_SEND2, improving multiple
UUID/service support in the driver.
- Introduces a helper function to check whether a partition can
receive REQUEST2 messages.
3. Partition handling generic improvements
- Implements device unregistration for better partition cleanup.
- Improves handling of the host partition presence in partition info.
4. FF-A version updates
- Upgrades the driver version to FF-A v1.2.
- Rejects major versions higher than the driver version as incompatible.
5. Big-Endian support fixes
- Fixes big-endian issues in:
__ffa_partition_info_regs_get()
__ffa_partition_info_get()
- Big-endian support is still incomplete, and only these changes can
be verified without additional application/testing updates at the
moment. We can discover all the partitions correctly with big-endian
kernel now.
6. Miscellaneous fixes
- Fixes function prototype misalignments in: sync_send_receive{,2}
- Adds explicit type casting for return values from: FFA_VERSION
and NOTIFICATION_INFO_GET
- Corrects vCPU list parsing in ffa_notification_info_get().
7. UUID management in the driver and DMA mask updates
- Replaces UUID buffer with the standard UUID format in ffa_partition_info
structure.
- Fixes a typo in some FF-A bus macros.
- Sets dma_mask for FF-A devices.
In short, this update enhances notification handling, UUID support, and
overall robustness of the FF-A driver while addressing multiple fixes
and cleanups.
-----BEGIN PGP SIGNATURE-----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=qX1J
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Phyc
-----END PGP SIGNATURE-----
Merge tag 'ffa-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.15
This update primarily focuses on FF-A framework notification support
along with other improvements, including UUID handling enhancements
and various fixes.
1. FF-A framework notification upport
- Adds support for multiple UUIDs per partition to register individual
SRI callbacks.
- Handles Rx buffer full framework notifications and provides a general
interface for future extensions.
2. Improved multiple UUID/services per-partition handling
- Adds support for UUID passing in FFA_MSG_SEND2, improving multiple
UUID/service support in the driver.
- Introduces a helper function to check whether a partition can
receive REQUEST2 messages.
3. Partition handling generic improvements
- Implements device unregistration for better partition cleanup.
- Improves handling of the host partition presence in partition info.
4. FF-A version updates
- Upgrades the driver version to FF-A v1.2.
- Rejects major versions higher than the driver version as incompatible.
5. Big-Endian support fixes
- Fixes big-endian issues in:
__ffa_partition_info_regs_get()
__ffa_partition_info_get()
- Big-endian support is still incomplete, and only these changes can
be verified without additional application/testing updates at the
moment. We can discover all the partitions correctly with big-endian
kernel now.
6. Miscellaneous fixes
- Fixes function prototype misalignments in: sync_send_receive{,2}
- Adds explicit type casting for return values from: FFA_VERSION
and NOTIFICATION_INFO_GET
- Corrects vCPU list parsing in ffa_notification_info_get().
7. UUID management in the driver and DMA mask updates
- Replaces UUID buffer with the standard UUID format in ffa_partition_info
structure.
- Fixes a typo in some FF-A bus macros.
- Sets dma_mask for FF-A devices.
In short, this update enhances notification handling, UUID support, and
overall robustness of the FF-A driver while addressing multiple fixes
and cleanups.
* tag 'ffa-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (23 commits)
firmware: arm_ffa: Set dma_mask for ffa devices
firmware: arm_ffa: Skip the first/partition ID when parsing vCPU list
firmware: arm_ffa: Explicitly cast return value from NOTIFICATION_INFO_GET
firmware: arm_ffa: Explicitly cast return value from FFA_VERSION before comparison
firmware: arm_ffa: Handle ffa_notification_get correctly at virtual FF-A instance
firmware: arm_ffa: Allow multiple UUIDs per partition to register SRI callback
firmware: arm_ffa: Add support for handling framework notifications
firmware: arm_ffa: Add support for {un,}registration of framework notifications
firmware: arm_ffa: Stash ffa_device instead of notify_type in notifier_cb_info
firmware: arm_ffa: Refactoring to prepare for framework notification support
firmware: arm_ffa: Remove unnecessary declaration of ffa_partitions_cleanup()
firmware: arm_ffa: Reject higher major version as incompatible
firmware: arm_ffa: Upgrade FF-A version to v1.2 in the driver
firmware: arm_ffa: Add support for passing UUID in FFA_MSG_SEND2
firmware: arm_ffa: Helper to check if a partition can receive REQUEST2 messages
firmware: arm_ffa: Unregister the FF-A devices when cleaning up the partitions
firmware: arm_ffa: Handle the presence of host partition in the partition info
firmware: arm_ffa: Refactor addition of partition information into XArray
firmware: arm_ffa: Fix big-endian support in __ffa_partition_info_regs_get()
firmware: arm_ffa: Fix big-endian support in __ffa_partition_info_get()
...
Link: https://lore.kernel.org/r/20250304105928.432997-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Couple of updates around the flexibility in SCMI device names and
addition of name, protocol id attributes and modalias for SCMI
devices in the sysfs.
Currently, in the scmi_protocol_device_request() function, SCMI device
names ust be unique across all protocols. However, this constraint is
being relaxed, allowing devices in different protocols to share the
same name. The change aims to provide more flexibility in naming devices
across various protocols.
Two attributes: name and protocol ID is being added to the SCMI device
in the sysfs along with the support for the modalias. These attributes
aim to enhance device identification and management.
-----BEGIN PGP SIGNATURE-----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=DMuT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cVvD
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.15
Couple of updates around the flexibility in SCMI device names and
addition of name, protocol id attributes and modalias for SCMI
devices in the sysfs.
Currently, in the scmi_protocol_device_request() function, SCMI device
names ust be unique across all protocols. However, this constraint is
being relaxed, allowing devices in different protocols to share the
same name. The change aims to provide more flexibility in naming devices
across various protocols.
Two attributes: name and protocol ID is being added to the SCMI device
in the sysfs along with the support for the modalias. These attributes
aim to enhance device identification and management.
* tag 'scmi-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Emit modalias for SCMI devices
firmware: arm_scmi: Add name and protocol id attributes
firmware: arm_scmi: Relax duplicate name constraint across protocol ids
Link: https://lore.kernel.org/r/20250304105915.432967-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just a single update introducing the support for the optional SOC_ID
name string from the Arm SMCCC v1.6 specification.
If the SOC_ID name string is implemented, the machine field of the SoC
Device Attributes will reflect it.
The original intent of SOC_ID was to provide a JEP-106 code for the SiP
and the SoC revision to uniquely identify the SoC. However, there has
been a request to add this optional name so that SoC firmware can
directly provide the SoC name to the OS.
This change avoids the need for frequent updates to various tools that
would otherwise require maintaining hardcoded model/machine name tables
for new SoCs.
-----BEGIN PGP SIGNATURE-----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=/iKV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=tny0
-----END PGP SIGNATURE-----
Merge tag 'smccc-update-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SMCCC update for v6.15
Just a single update introducing the support for the optional SOC_ID
name string from the Arm SMCCC v1.6 specification.
If the SOC_ID name string is implemented, the machine field of the SoC
Device Attributes will reflect it.
The original intent of SOC_ID was to provide a JEP-106 code for the SiP
and the SoC revision to uniquely identify the SoC. However, there has
been a request to add this optional name so that SoC firmware can
directly provide the SoC name to the OS.
This change avoids the need for frequent updates to various tools that
would otherwise require maintaining hardcoded model/machine name tables
for new SoCs.
* tag 'smccc-update-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: smccc: Support optional Arm SMCCC SOC_ID name
Link: https://lore.kernel.org/r/20250304105845.432813-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmfAN/4UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4sswf+KA9QBYQomjw4vzrjtSDLbGFY2xhH
lovwDFXFI4U1uAMccbo/uEGiGXNfgT9CuieelgNKasdJzOoH0UmZmJG70ohIV69A
zy2IzsG1JyqENf9j7YYm5aQYvuiwgKP04c8vMRsDBLCxB9FPN7MxA8M8gAAGXJVx
JjsxN8jl4CT4r6BeUMNhz7vc3XsYmhqNYGxYDJW9Q2zAb17R/IvZTdaz8UPAmCak
7PvuU1LeRHDP4G//lcocRRgymW/6KSkPULRkIMosLv+hfFl0jZ5nL6UumrhzAB3i
CeMF6woWn44MfaqJ9fFfjZM2ToBQo0ALJd5ZtjowBapvTZl9GIEcrZ7+Pw==
=N+Yn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=t1ga
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.14:
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
soc: imx8m: Unregister cpufreq and soc dev in cleanup path
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
firmware: imx-scu: fix OF node leak in .probe()
Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Issue Number 1.6 of the Arm SMC Calling Convention introduces an optional
SOC_ID name string. If implemented, point the 'machine' field of the SoC
Device Attributes at this string so that it will appear under
/sys/bus/soc/devices/soc0/machine.
On Arm SMC compliant SoCs, this will allow things like 'lscpu' to
eventually get a SoC provider model name from there rather than each
tool/utility needing to get a possibly inconsistent, obsolete, or incorrect
model/machine name from its own hardcoded model/machine name table.
Signed-off-by: Paul Benoit <paul@os.amperecomputing.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Message-Id: <20250219005932.3466-1-paul@os.amperecomputing.com>
(sudeep.holla: Dropped regsize variable and used 8 instead as Mark suggested)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
- Fix CPER error record parsing bugs
- Fix a couple of efivarfs issues that were introduced in the merge
window
- Fix an issue in the early remapping code of the MOKvar table
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ8G8cgAKCRAwbglWLn0t
XMQDAQDNgLENwTSbVZlJaXqc3EEb0hTeV1Rg1WG9gB5DJg5bFgD/ZoWxbY6um/Pn
Pa7jg3tCR4bINq7WRVbMAocORGN8ZAY=
=HbXA
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Another couple of EFI fixes for v6.14.
Only James's patch stands out, as it implements a workaround for odd
behavior in fwupd in user space, which creates EFI variables by
touching a file in efivarfs, clearing the immutable bit (which gets
set automatically for $reasons) and then opening it again for writing,
none of which is really necessary.
The fwupd author and LVFS maintainer is already rolling out a fix for
this on the fwupd side, and suggested that the workaround in this PR
could be backed out again during the next cycle.
(There is a semantic mismatch in efivarfs where some essential
variable attributes are stored in the first 4 bytes of the file, and
so zero length files cannot exist, as they cannot be written back to
the underlying variable store. So now, they are dropped once the last
reference is released.)
Summary:
- Fix CPER error record parsing bugs
- Fix a couple of efivarfs issues that were introduced in the merge
window
- Fix an issue in the early remapping code of the MOKvar table"
* tag 'efi-fixes-for-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/mokvar-table: Avoid repeated map/unmap of the same page
efi: Don't map the entire mokvar table to determine its size
efivarfs: allow creation of zero length files
efivarfs: Defer PM notifier registration until .fill_super
efi/cper: Fix cper_arm_ctx_info alignment
efi/cper: Fix cper_ia_proc_ctx alignment
Set dma_mask for FFA devices, otherwise DMA allocation using the device pointer
lead to following warning:
WARNING: CPU: 1 PID: 1 at kernel/dma/mapping.c:597 dma_alloc_attrs+0xe0/0x124
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <e3dd8042ac680bd74b6580c25df855d092079c18.1737107520.git.viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tweak the logic that traverses the MOKVAR UEFI configuration table to
only unmap the entry header and map the next one if they don't live in
the same physical page.
Link: https://lore.kernel.org/all/8f085931-3e9d-4386-9209-1d6c95616327@uncooperative.org/
Tested-By: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220
...
Call Trace:
<TASK>
? __early_ioremap+0xef/0x220
? __warn.cold+0x93/0xfa
? __early_ioremap+0xef/0x220
? report_bug+0xff/0x140
? early_fixup_exception+0x5d/0xb0
? early_idt_handler_common+0x2f/0x3a
? __early_ioremap+0xef/0x220
? efi_mokvar_table_init+0xce/0x1d0
? setup_arch+0x864/0xc10
? start_kernel+0x6b/0xa10
? x86_64_start_reservations+0x24/0x30
? x86_64_start_kernel+0xed/0xf0
? common_startup_64+0x13e/0x141
</TASK>
---[ end trace 0000000000000000 ]---
mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187.
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place.
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range.
All the rest are small device-specific fixes and should be fairly
safe to take.
-----BEGIN PGP SIGNATURE-----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=i1Wa
-----END PGP SIGNATURE-----
Merge tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range. All the rest are
small device-specific fixes and should be fairly safe to take"
* tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
firmware: cs_dsp: Remove async regmap writes
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
ASoC: dapm-graph: set fill colour of turned on nodes
ASoC: fsl: Rename stream name of SAI DAI driver
ASoC: es8328: fix route from DAC to output
ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
ASoC: tas2764: Set the SDOUT polarity correctly
ASoC: tas2764: Fix power control mask
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
ASoC: tas2770: Fix volume scale
Retrieve any migration target implementation CPUs using the hypercall
and enable associated errata.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250221140229.12588-6-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
With ARCH_K3=y we cannot enable TI_SCI_PROTOCOL=m because
ARCH_K3 selects TI_SCI_PROTOCOL.
Modify the logic to enable TI_SCI_PROTOCOL by default when ARCH_K3=y
allowing us to submit a future patch to remove select on ARCH_K3 without
breaking existing users.
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20250220-ti-firmware-v2-1-ff26883c6ce9@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Change calls to async regmap write functions to use the normal
blocking writes so that the cs35l56 driver can use spi_bus_lock() to
gain exclusive access to the SPI bus.
As this is part of a fix, it makes only the minimal change to swap the
functions to the blocking equivalents. There's no need to risk
reworking the buffer allocation logic that is now partially redundant.
The async writes are a 12-year-old workaround for inefficiency of
synchronous writes in the SPI subsystem. The SPI subsystem has since
been changed to avoid the overheads, so this workaround should not be
necessary.
The cs35l56 driver needs to use spi_bus_lock() prevent bus activity
while it is soft-resetting the cs35l56. But spi_bus_lock() is
incompatible with spi_async() calls, which will fail with -EBUSY.
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250225131843.113752-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FF-A notification id list received in response to the call
FFA_NOTIFICATION_INFO_GET is encoded as: partition ID followed by 0 or
more vCPU ID. The count includes all of them.
Fix the issue by skipping the first/partition ID so that only the list
of vCPU IDs are processed correctly for a given partition ID. The first/
partition ID is read before the start of the loop.
Fixes: 3522be48d8 ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface")
Reported-by: Andrei Homescu <ahomescu@google.com>
Message-Id: <20250223213909.1197786-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
According to the UEFI Common Platform Error Record appendix, the
processor context information structure is a variable length structure,
but "is padded with zeros if the size is not a multiple of 16 bytes".
Currently this isn't honoured, causing all but the first structure to
be garbage when printed. Thus align the size to be a multiple of 16.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
According to the UEFI Common Platform Error Record appendix, the
IA32/X64 Processor Context Information Structure is a variable length
structure, but "is padded with zeros if the size is not a multiple
of 16 bytes".
Currently this isn't honoured, causing all but the first structure to
be garbage when printed. Thus align the size to be a multiple of 16.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files, addressing
both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes.
-----BEGIN PGP SIGNATURE-----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=z1+P
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files,
addressing both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes"
* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
tee: optee: Fix supplicant wait loop
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
MAINTAINERS: arm: apple: Add Janne as maintainer
MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
The EFI mixed mode code has been decoupled from the legacy decompressor,
in order to be able to reuse it with generic EFI zboot images for x86.
Move the source file into the libstub source directory to facilitate
this.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The difference between the PE and handover entrypoints in the EFI stub
is that the former allocates a struct boot_params whereas the latter
expects one from the caller. Currently, these are two completely
separate entrypoints, duplicating some logic and both relying of
efi_exit() to return straight back to the firmware on an error.
Simplify this by making the PE entrypoint call the handover entrypoint
with NULL as the argument for the struct boot_params parameter. This
makes the code easier to follow, and removes the need to support two
different calling conventions in the mixed mode asm code.
While at it, move the assignment of boot_params_ptr into the function
that actually calls into the legacy decompressor, which is where its
value is required.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The return value ret.a2 is of type unsigned long and FFA_RET_NO_DATA is
a negative value.
Since the return value from the firmware can be just 32-bit even on
64-bit systems as FFA specification mentions it as int32 error code in
w0 register, explicitly casting to s32 ensures correct sign interpretation
when comparing against a signed error code FFA_RET_NO_DATA.
Without casting, comparison between unsigned long and a negative
constant could lead to unintended results due to type promotions.
Fixes: 3522be48d8 ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface")
Reported-by: Andrei Homescu <ahomescu@google.com>
Message-Id: <20250221095633.506678-2-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The return value ver.a0 is unsigned long type and FFA_RET_NOT_SUPPORTED
is a negative value.
Since the return value from the firmware can be just 32-bit even on
64-bit systems as FFA specification mentions it as int32 error code in
w0 register, explicitly casting to s32 ensures correct sign interpretation
when comparing against a signed error code FFA_RET_NOT_SUPPORTED.
Without casting, comparison between unsigned long and a negative
constant could lead to unintended results due to type promotions.
Fixes: 3bbfe98710 ("firmware: arm_ffa: Add initial Arm FFA driver support")
Reported-by: Andrei Homescu <ahomescu@google.com>
Message-Id: <20250221095633.506678-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20250114-sysfs-const-bin_attr-qemu_fw_cfg-v1-1-76f525a3ee72@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250125-sysfs-const-bin_attr-dmi-v2-3-ece1895936f4@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just a single fix to address the incorrect size of the Tx buffer in the
function scmi_imx_misc_ctrl_set() which is part of NXP/i.MX SCMI vendor
extensions.
-----BEGIN PGP SIGNATURE-----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=dloZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dTib
-----END PGP SIGNATURE-----
Merge tag 'scmi-fix-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fix for v6.14
Just a single fix to address the incorrect size of the Tx buffer in the
function scmi_imx_misc_ctrl_set() which is part of NXP/i.MX SCMI vendor
extensions.
* tag 'scmi-fix-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
Link: https://lore.kernel.org/r/20250217155246.1668182-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The char pointers in 'struct cs_dsp_mock_coeff_def' are expected to
point to C strings. They need to be terminated by a null byte.
However the code does not allocate that trailing null byte and only
works if by chance the allocation is followed by such a null byte.
Refactor the repeated string allocation logic into a new helper which
makes sure the terminating null is always present.
It also makes the code more readable.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Fixes: 83baecd92e ("firmware: cs_dsp: Add KUnit testing of control parsing")
Cc: stable@vger.kernel.org
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250211-cs_dsp-kunit-strings-v1-1-d9bc2035d154@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Re-use the adsp2 test cases for the Halo Core test run. Before this the
Halo Core kunit_case array was an empty placeholder.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250219152132.1285941-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
imx_scu_probe() calls of_parse_phandle_with_args(), but does not
release the OF node reference obtained by it. Add a of_node_put() call
after done with the node.
Fixes: f25a066d1a ("firmware: imx-scu: Support one TX and one RX")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently it is assumed that the driver always calls ffa_notification_get()
at the NS physical FF-A instance to request the SPMC to return pending
SP or SPM Framework notifications. However, in order to support the driver
invoking ffa_notification_get() at virtual FF-A instance, we need to make
sure correct bits are enabled in the bitmaps enable flag.
It is expected to have hypervisor framework and VM notifications bitmap
to be zero at the non-secure physical FF-A instance.
Message-Id: <20250217-ffa_updates-v3-19-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
A partition can implement multiple UUIDs and currently we successfully
register each UUID service as a FF-A device. However when adding the
same partition info to the XArray which tracks the SRI callbacks more
than once, it fails.
In order to allow multiple UUIDs per partition to register SRI callbacks
the partition information stored in the XArray needs to be extended to
a listed list.
A function to remove the list of partition information in the XArray
is not added as there are no users at the time. All the partitions are
added at probe/initialisation and removed at cleanup stage.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-18-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently FF-A specification defines only one framework notification:
RX buffer full notification. This notification is signaled by the
partition manager during transmission of a partition message through
indirect messaging to,
1. Notify an endpoint that it has a pending message in its Rx buffer.
2. Inform the message receiver’s scheduler via the schedule receiver
interrupt that the receiver must be run.
In response to an FFA_MSG_SEND2 invocation by a sender endpoint, the
framework performs the following actions after the message is copied
from the Tx buffer of the sender to the Rx buffer of the receiver:
1. The notification is pended in the framework notification bitmap of
the receiver.
2. The partition manager of the endpoint that contains receiver’s
scheduler pends the schedule receiver interrupt for this endpoint.
The receiver receives the notification and copies out the message from
its Rx buffer.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-17-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Framework notifications are doorbells that are rung by the partition
managers to signal common events to an endpoint. These doorbells cannot
be rung by an endpoint directly. A partition manager can signal a
Framework notification in response to an FF-A ABI invocation by an
endpoint.
Two additional notify_ops interface is being added for any FF-A device/
driver to register and unregister for such a framework notifications.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-16-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently, we store the type of the notification in the notifier_cb_info
structure that is put into the hast list to identify if the notification
block is for the secure partition or the non secure VM.
In order to support framework notifications to reuse the hash list and
to avoid creating one for each time, we need store the ffa_device pointer
itself as the same notification ID in framework notifications can be
registered by multiple FF-A devices.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-15-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently, the framework notifications are not supported at all.
handle_notif_callbacks() doesn't handle them though it is called with
framework bitmap. Make that explicit by adding checks for the same.
Also, we need to further classify the framework notifications as Secure
Partition Manager(SPM) and NonSecure Hypervisor(NS_HYP). Extend/change
notify_type enumeration to accommodate all the 4 type and rejig the
values so that it can be reused in the bitmap enable mask macros.
While at this, move ffa_notify_type_get() so that it can be used in
notifier_hash_node_get() in the future.
No functional change.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-14-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In order to keep the uniformity, just move the ffa_partitions_cleanup()
before it's first usage and drop the unnecessary forward declaration.
No functional change.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-13-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When the firmware compatibility was handled previously in the commit
8e3f9da608 ("firmware: arm_ffa: Handle compatibility with different firmware versions"),
we only addressed firmware versions that have higher minor versions
compared to the driver version which is should be considered compatible
unless the firmware returns NOT_SUPPORTED.
However, if the firmware reports higher major version than the driver
supported, we need to reject it. If the firmware can work in a compatible
mode with the driver requested version, it must return the same major
version as requested.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-12-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The basic and mandatory features of FF-A v1.2 are all supported now.
The driver supported version can be bumped from v1.1 to v1.2
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-11-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FF-A v1.2 introduces UUID field in partition message header used in
FFA_MSG_SEND2 to enable partitions/endpoints exposing multiple UUIDs.
Add the support for passing UUID in FFA_MSG_SEND2.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-10-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Both the FF-A core and the bus were in a single module before the
commit 18c250bd7e ("firmware: arm_ffa: Split bus and driver into distinct modules").
The arm_ffa_bus_exit() takes care of unregistering all the FF-A devices.
Now that there are 2 distinct modules, if the core driver is unloaded and
reloaded, it will end up adding duplicate FF-A devices as the previously
registered devices weren't unregistered when we cleaned up the modules.
Fix the same by unregistering all the FF-A devices on the FF-A bus during
the cleaning up of the partitions and hence the cleanup of the module.
Fixes: 18c250bd7e ("firmware: arm_ffa: Split bus and driver into distinct modules")
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-8-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently it is assumed that the firmware doesn't present the host
partition in the list of partitions presented as part of the response
to PARTITION_INFO_GET from the firmware. However, there are few
platforms that prefer to present the same in the list of partitions.
It is not manadatory but not restricted as well.
So handle the same by making sure to check the presence of the host
VM ID in the XArray partition information maintained/managed in the
driver before attempting to add it.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-7-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Move the common code handling addition of the FF-A partition information
into the XArray as a new routine. No functional change.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-6-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently the FF-A driver doesn't support big-endian correctly. It is
hard to regularly test the setup due to lack of test infrastructure and
tools.
In order to support full stack, we need to take small steps in getting
the support for big-endian kernel added slowly. This change fixes the
support in __ffa_partition_info_regs_get() so that the response from the
firmware are converted correctly as required. With this change, we can
enumerate all the FF-A devices correctly in the big-endian kernel if the
FFA_PARTITION_INFO_REGS_GET is supported.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-5-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently the FF-A driver doesn't support big-endian correctly. It is
hard to regularly test the setup due to lack of test infrastructure and
tools.
In order to support full stack, we need to take small steps in getting
the support for big-endian kernel added slowly. This change fixes the
support in __ffa_partition_info_get() so that the response from the
firmware are converted correctly as required. With this change, we can
enumerate all the FF-A devices correctly in the big-endian kernel.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-4-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently ffa_sync_send_receive2() takes UUID as a separate parameter
instead of using the one available in ffa_device structure.
Change the prototype of ffa_sync_send_receive2() to align with the
ffa_sync_send_receive() and use ffa_device->uuid.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-3-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently ffa_partition_info structure holds the UUID in the format
compatible with the firmware interface. However, most of the functions
in the FF-A core driver deals directly with uuid_t type.
Replace UUID buffer to standard UUID format in the ffa_partition_info
structure.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-2-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Commit 22779149e9 ("firmware: arm_ffa: Emit modalias for FF-A devices")
added modalias for FF-A devices. However the macro added used SCMI
incorrectly. Replace the reference to SCMI by FF-A and update the macro.
(i.e. s/SCMI/FFA/)
No functional change.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-1-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Fpga get config status just returns status through ret_payload and there
is no need to allocate local buf and send its address through SMC args.
Moreover, the address that is being passed till now is linux virtual
address and is incorrect.
Corresponding modification has been done in the firmware to avoid using the
address sent by linux.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
Link: https://lore.kernel.org/r/20250207054951.1650534-1-nava.kishore.manne@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Alive Clock and Power Manager (ACPM) Message Protocol is defined for
the purpose of communication between the ACPM firmware and masters
(AP, AOC, ...). ACPM firmware operates on the Active Power Management
(APM) module that handles overall power activities.
ACPM and masters regard each other as independent hardware component and
communicate with each other using mailbox messages and shared memory.
This protocol driver provides the interface for all the client drivers
making use of the features offered by the APM. Add ACPM protocol support.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250213-gs101-acpm-v9-2-8b0281b93c8b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute into
account when placing the kernel image in memory at boot. Otherwise, the
presence of the kernel image could prevent such a memory region from
being unplugged at runtime if it was 'cold plugged', i.e., already
plugged in at boot time (and exposed via the EFI memory map)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ69vHgAKCRAwbglWLn0t
XM7ZAQCQXtg7TQjRHHpkc868dR+TV+aE4uzb8IMj4F4fPAL1FQD/f6fBE84O+sVV
joQn6uawVA7vN/mwvfWq9JQ43zvtnQY=
=DQZ0
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute
into account when placing the kernel image in memory at boot.
Otherwise, the presence of the kernel image could prevent such a
memory region from being unplugged at runtime if it was 'cold
plugged', i.e., already plugged in at boot time (and exposed via the
EFI memory map).
This should ensure that the new EFI_MEMORY_HOT_PLUGGABLE memory
attribute is used consistently by Linux before it ever turns up in
production, ensuring that we can make meaningful use of it without
running the risk of regressing existing users"
* tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Use BIT_ULL() constants for memory attributes
efi: Avoid cold plugged memory for placing the kernel
The i.MX System Controller Management Interface firmware is only present
on Freescale i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent
asking the user about this driver when configuring a kernel without
Freescale i.MX platform support.
Fixes: 514b2262ad ("firmware: arm_scmi: Fix i.MX build dependency")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
'struct scmi_imx_misc_ctrl_set_in' has a zero length array in the end,
The sizeof will not count 'value[]', and hence Tx size will be smaller
than actual size for Tx,and SCMI firmware will flag this as protocol
error.
Fix this by enlarge the Tx size with 'num * sizeof(__le32)' to count in
the size of data.
Fixes: 61c9f03e22 ("firmware: arm_scmi: Add initial support for i.MX MISC protocol")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Tested-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250123063441.392555-1-peng.fan@oss.nxp.com>
(sudeep.holla: Commit rewording and replace hardcoded sizeof(__le32) value)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Since the conversion to using the TZ allocator, the efivars service is
registered before the memory pool has been allocated, something which
can lead to a NULL-pointer dereference in case of a racing EFI variable
access.
Make sure that all resources have been set up before registering the
efivars.
Fixes: 6612103ec3 ("firmware: qcom: qseecom: convert to using the TZ allocator")
Cc: stable@vger.kernel.org # 6.11
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250120151000.13870-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sBZ7
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft
Pull ibft fixes from Konrad Rzeszutek Wilk:
"Two tiny fixes to IBFT code: one for Kconfig and another for IPv6"
* tag 'stable/for-linus-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic()
firmware: iscsi_ibft: fix ISCSI_IBFT Kconfig entry
Move the declaration of cxl_cper_print_prot_err() to include/linux/cper.h
to avoid maintaining a separate header file just for this function
declaration. Remove drivers/firmware/efi/cper_cxl.h as its contents have
been reorganized.
No functional changes.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250123084421.127697-4-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In preparation to add tracepoint support, move protocol error UUID
definition to a common location, Also, make struct CXL RAS capability,
cxl_cper_sec_prot_err and CPER validation flags global for use across
different modules.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250123084421.127697-3-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Rename the protocol error struct from struct cper_sec_prot_err to
struct cxl_cper_sec_prot_err and cper_print_prot_err() to
cxl_cper_print_prot_err() to maintain naming consistency. No
functional changes.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250123084421.127697-2-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Set the error code if devm_qcom_tzmem_pool_new() fails. Don't return
success.
Fixes: 1e76b546e6 ("firmware: qcom: scm: Cleanup global '__scm' on probe failures")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/a0845467-4f83-4070-ab1e-ff7e6764609f@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
UEFI 2.11 introduced EFI_MEMORY_HOT_PLUGGABLE to annotate system memory
regions that are 'cold plugged' at boot, i.e., hot pluggable memory that
is available from early boot, and described as system RAM by the
firmware.
Existing loaders and EFI applications running in the boot context will
happily use this memory for allocating data structures that cannot be
freed or moved at runtime, and this prevents the memory from being
unplugged. Going forward, the new EFI_MEMORY_HOT_PLUGGABLE attribute
should be tested, and memory annotated as such should be avoided for
such allocations.
In the EFI stub, there are a couple of occurrences where, instead of the
high-level AllocatePages() UEFI boot service, a low-level code sequence
is used that traverses the EFI memory map and carves out the requested
number of pages from a free region. This is needed, e.g., for allocating
as low as possible, or for allocating pages at random.
While AllocatePages() should presumably avoid special purpose memory and
cold plugged regions, this manual approach needs to incorporate this
logic itself, in order to prevent the kernel itself from ending up in a
hot unpluggable region, preventing it from being unplugged.
So add the EFI_MEMORY_HOTPLUGGABLE macro definition, and check for it
where appropriate.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In order to enable libkmod lookups for SCMI device objects to their
corresponding module, add 'modalias' to the base attribute of SCMI
devices.
Message-Id: <20250131141822.514342-3-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add the name and the protocol id attributes to the SCMI devices on the
bus so that they are exposed to the user-space via the sysfs.
Message-Id: <20250131141822.514342-2-sudeep.holla@arm.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently in scmi_protocol_device_request(), no duplicate scmi device
name is allowed across any protocol. However scmi_dev_match_id() first
matches the protocol id and then the name. So, there is no strict
requirement to keep this scmi device name unique across all the protocols.
Relax the constraint on the duplicate name across the protocols and
inhibit only within the same protocol id.
Message-Id: <20250131141822.514342-1-sudeep.holla@arm.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Here is a collection of fixes that have been gathered since the
previous PR. All about device-specific fixes and quirks, and most
of them are pretty small and trivial.
-----BEGIN PGP SIGNATURE-----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=FOg9
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of fixes that have been gathered since the
previous pull request.
All about device-specific fixes and quirks, and most of them are
pretty small and trivial"
* tag 'sound-fix-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda/realtek: Workaround for resume on Dell Venue 11 Pro 7130
ALSA: hda: Fix headset detection failure due to unstable sort
ALSA: pcm: use new array-copying-wrapper
ASoC: codec: es8316: "DAC Soft Ramp Rate" is just a 2 bit control
ASoC: amd: acp: Fix possible deadlock
firmware: cs_dsp: FW_CS_DSP_KUNIT_TEST should not select REGMAP
ALSA: usb-audio: Add delay quirk for iBasso DC07 Pro
ALSA: hda/realtek: Fix quirk matching for Legion Pro 7
ASoC: renesas: SND_SIU_MIGOR should depend on DMADEVICES
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet 5V
ASoC: da7213: Initialize the mutex
ASoC: use to_platform_device() instead of container_of()
ASoC: acp: Support microphone from Lenovo Go S
ASoC: SOF: imx8m: Add entry for new 8M Plus revision
ASoC: SOF: imx8: Add entries for new 8QM and 8QXP revisions
ASoC: SOF: imx: Add mach entry to select cs42888 topology
dt-bindings: arm: imx: Add board revisions for i.MX8MP, i.MX8QM and i.MX8QXP
ASoC: fsl_asrc_m2m: select CONFIG_DMA_SHARED_BUFFER
ASoC: audio-graph-card2: use correct endpoint when getting link parameters
ASoC: SOF: imx8m: add SAI2,5,6,7
...
When performing an iSCSI boot using IPv6, iscsistart still reads the
/sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix
length is 64, this causes the shift exponent to become negative,
triggering a UBSAN warning. As the concept of a subnet mask does not
apply to IPv6, the value is set to ~0 to suppress the warning message.
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5fGOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynatACeLlbkhUT544Va1eOL2TkjfcGxrZUAoJ3ymGC0
y0N7/+fWL6aS+b4sEilv
=TU0D
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO driver updates from Greg KH:
"Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
ntsync: Fix reference leaks in the remaining create ioctls.
spmi: hisi-spmi-controller: Drop duplicated OF node assignment in spmi_controller_probe()
spmi: Set fwnode for spmi devices
ntsync: fix a file reference leak in drivers/misc/ntsync.c
scripts/tags.sh: Don't tag usages of DECLARE_BITMAP
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
memstick: core: fix kernel-doc notation
intel_th: core: fix kernel-doc warnings
binder: log transaction code on failure
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
misc: fastrpc: Fix copy buffer page size
misc: fastrpc: Fix registered buffer page address
misc: fastrpc: Deregister device nodes properly in error scenarios
nvmem: core: improve range check for nvmem_cell_write()
nvmem: qcom-spmi-sdam: Set size in struct nvmem_config
...
Enabling a (modular) test should not silently enable additional kernel
functionality, as that may increase the attack vector of a product.
Fix this by making FW_CS_DSP_KUNIT_TEST (and FW_CS_DSP_KUNIT_TEST_UTILS)
depend on REGMAP instead of selecting it.
After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build
modules for all appropriate tests for ones system, without pulling in
extra unwanted functionality, while still allowing a tester to manually
enable REGMAP_BUILD and this test suite on a system where REGMAP is not
enabled by default.
Fixes: dd0b6b1f29 ("firmware: cs_dsp: Add KUnit testing of bin file download")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/73c81ac85e21f1c5a75b7628d90cbb0e1b4ed0fa.1737833376.git.geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
- Increase the headroom in the EFI memory map allocation created by the
EFI stub. This is needed because event callbacks called during
ExitBootServices() may cause fragmentation, and reallocation is not
allowed after that.
- Drop obsolete UGA graphics code and switch to a more ergonomic API to
traverse handle buffers. Simplify some error paths using a __free()
helper while at it.
- Fix some W=1 warnings when CONFIG_EFI=n
- Rely on the dentry cache to keep track of the contents of the efivarfs
filesystem, rather than using a separate linked list.
- Improve and extend efivarfs test cases.
- Synchronize efivarfs with underlying variable store on resume from
hibernation - this is needed because the firmware itself or another OS
running on the same machine may have modified it.
- Fix x86 EFI stub build with GCC 15.
- Fix kexec/x86 false positive warning in EFI memory attributes table
sanity check.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ5IH+gAKCRAwbglWLn0t
XHyMAP9Mqn5dD4XT22gvTRUrJuVYFLBlN+9d8ysRMjRVCzGwCQEAvCUJMy5Kje0J
h9i2InWjjPOVATx5hTrEoIEl96BGOgk=
=3Hnk
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Increase the headroom in the EFI memory map allocation created by the
EFI stub. This is needed because event callbacks called during
ExitBootServices() may cause fragmentation, and reallocation is not
allowed after that.
- Drop obsolete UGA graphics code and switch to a more ergonomic API to
traverse handle buffers. Simplify some error paths using a __free()
helper while at it.
- Fix some W=1 warnings when CONFIG_EFI=n
- Rely on the dentry cache to keep track of the contents of the
efivarfs filesystem, rather than using a separate linked list.
- Improve and extend efivarfs test cases.
- Synchronize efivarfs with underlying variable store on resume from
hibernation - this is needed because the firmware itself or another
OS running on the same machine may have modified it.
- Fix x86 EFI stub build with GCC 15.
- Fix kexec/x86 false positive warning in EFI memory attributes table
sanity check.
* tag 'efi-next-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (23 commits)
x86/efi: skip memattr table on kexec boot
efivarfs: add variable resync after hibernation
efivarfs: abstract initial variable creation routine
efi: libstub: Use '-std=gnu11' to fix build with GCC 15
selftests/efivarfs: add concurrent update tests
selftests/efivarfs: fix tests for failed write removal
efivarfs: fix error on write to new variable leaving remnants
efivarfs: remove unused efivarfs_list
efivarfs: move variable lifetime management into the inodes
selftests/efivarfs: add check for disallowing file truncation
efivarfs: prevent setting of zero size on the inodes in the cache
efi: sysfb_efi: fix W=1 warnings when EFI is not set
efi/libstub: Use __free() helper for pool deallocations
efi/libstub: Use cleanup helpers for freeing copies of the memory map
efi/libstub: Simplify PCI I/O handle buffer traversal
efi/libstub: Refactor and clean up GOP resolution picker code
efi/libstub: Simplify GOP handling code
efi/libstub: Use C99-style for loop to traverse handle buffer
x86/efistub: Drop long obsolete UGA support
efivarfs: make variable_is_present use dcache lookup
...
These are changes to SoC specific drivers and DT bindings that don't have
a separate subsystem tree, or that get grouped here for simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding support
for additional SoCs in the exssting drivers, and support for wrapped
encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx and
renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the code
and adding a few interfaces to other drivers.
-----BEGIN PGP SIGNATURE-----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=oeUS
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are changes to SoC specific drivers and DT bindings that don't
have a separate subsystem tree, or that get grouped here for
simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding
support for additional SoCs in the exssting drivers, and support
for wrapped encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx
and renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the
code and adding a few interfaces to other drivers"
* tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (58 commits)
drivers/soc/litex: Use devm_register_restart_handler()
reset: amlogic: aux: drop aux registration helper
reset: amlogic: aux: get regmap through parent device
reset: amlogic: add support for A1 SoC in auxiliary reset driver
dt-bindings: reset: add bindings for A1 SoC audio reset controller
soc/tegra: fuse: Update Tegra234 nvmem keepout list
soc/tegra: Fix spelling error in tegra234_lookup_slave_timeout()
soc/tegra: cbb: Drop unnecessary debugfs error handling
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
soc: mediatek: mtk-devapc: Fix leaking IO map on driver remove
soc: mediatek: mtk-devapc: Fix leaking IO map on error paths
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
...
This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
* Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI 2.0
- compress-offload API extensions for ASRC support
* ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
* HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual
-----BEGIN PGP SIGNATURE-----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=IBfz
-----END PGP SIGNATURE-----
Merge tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI
2.0
- compress-offload API extensions for ASRC support
ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual"
* tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (235 commits)
ALSA: hda: tas2781-spi: Fix bogus error handling in tas2781_hda_spi_probe()
ALSA: hda: tas2781-spi: Fix error code in tas2781_read_acpi()
ALSA: hda: tas2781-spi: Delete some dead code
ALSA: usb: fcp: Fix return code from poll ops
ALSA: usb: fcp: Fix incorrect resp->opcode retrieval
ALSA: usb: fcp: Fix meter_levels type to __le32
ALSA: hda/realtek: Enable Mute LED on HP Laptop 14s-fq1xxx
ALSA: hda: tas2781-spi: Fix -Wsometimes-uninitialized in tasdevice_spi_switch_book()
ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions
ALSA: hda: tas2781-spi: select CRC32 instead of CRC32_SARWATE
ALSA: usb: fcp: Fix hwdep read ops types
ALSA: scarlett2: Add device_setup option to use FCP driver
ALSA: FCP: Add Focusrite Control Protocol driver
ALSA: hda/tas2781: Add tas2781 hda SPI driver
ALSA: hda/realtek - Fixed headphone distorted sound on Acer Aspire A115-31 laptop
ASoC: xilinx: xlnx_spdif: Simpify using devm_clk_get_enabled()
ALSA: hda: Support for Ideapad hotkey mute LEDs
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83JX, 83MC and 83NM
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83LC
ASoC: dapm: add support for preparing streams
...
GCC 15 changed the default C standard version to C23, which should not
have impacted the kernel because it requests the gnu11 standard via
'-std=' in the main Makefile. However, the EFI libstub Makefile uses its
own set of KBUILD_CFLAGS for x86 without a '-std=' value (i.e., using
the default), resulting in errors from the kernel's definitions of bool,
true, and false in stddef.h, which are reserved keywords under C23.
./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
11 | false = 0,
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
Set '-std=gnu11' in the x86 cflags to resolve the error and consistently
use the same C standard version for the entire kernel. All other
architectures reuse KBUILD_CFLAGS from the rest of the kernel, so this
issue is not visible for them.
Cc: stable@vger.kernel.org
Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
Reported-by: Jakub Jelinek <jakub@redhat.com>
Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The Qualcomm SCM drivers gains a number of fixes and improvements
related to race conditions during initialization. QSEECOM and the EFI
variable service therein is enabled for a few 8cx Gen 3 and X Elite
boards.
LLCC driver gains configuration for IPQ5424 and WRCACHE is enabled on X
Elite.
The BCM_TCS_CMD() macro is corrected and is cleaned up.
Support for SM7225 and X 1 Plus are added to the pd-mapper.
pmic_glink and the associated altmode driver are simplied using guards.
socinfo is added for QCS9075 and serial number readout on MSM8916
devices is corrected.
-----BEGIN PGP SIGNATURE-----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=ra/f
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cVEn
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.14
The Qualcomm SCM drivers gains a number of fixes and improvements
related to race conditions during initialization. QSEECOM and the EFI
variable service therein is enabled for a few 8cx Gen 3 and X Elite
boards.
LLCC driver gains configuration for IPQ5424 and WRCACHE is enabled on X
Elite.
The BCM_TCS_CMD() macro is corrected and is cleaned up.
Support for SM7225 and X 1 Plus are added to the pd-mapper.
pmic_glink and the associated altmode driver are simplied using guards.
socinfo is added for QCS9075 and serial number readout on MSM8916
devices is corrected.
* tag 'qcom-drivers-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (29 commits)
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
soc: qcom: socinfo: add QCS9075 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS9075
soc: qcom: socinfo: Avoid out of bounds read of serial number
firmware: qcom: scm: Allow QSEECOM on Huawei Matebook E Go (sc8280xp)
firmware: qcom: scm: Allow QSEECOM for Windows Dev Kit 2023
firmware: qcom: scm: Allow QSEECOM for HP Omnibook X14
soc: qcom: rmtfs: constify rmtfs_class
soc: qcom: rmtfs: allow building the module with COMPILE_TEST=y
soc: qcom: pmic_glink_altmode: simplify locking with guard()
soc: qcom: Rework BCM_TCS_CMD macro
...
Link: https://lore.kernel.org/r/20250111172901.391774-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This mainly has 2 updates:
1. Extension of the transport properties read from devicetree to support
multiple SCMI platform/server instances
2. Addition of the capability to automatically load the proper SCMI vendor
protocol module. The vendor protocol selection is already provided by
the SCMI core while the automatic loading of vendor protocols was not.
-----BEGIN PGP SIGNATURE-----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=ga0n
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ixTm
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for 6.14
This mainly has 2 updates:
1. Extension of the transport properties read from devicetree to support
multiple SCMI platform/server instances
2. Addition of the capability to automatically load the proper SCMI vendor
protocol module. The vendor protocol selection is already provided by
the SCMI core while the automatic loading of vendor protocols was not.
* tag 'scmi-updates-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add aliases to transport modules
firmware: arm_scmi: Add module aliases to i.MX vendor protocols
firmware: arm_scmi: Support vendor protocol modules autoloading
firmware: arm_scmi: Allow transport properties for multiple instances
Link: https://lore.kernel.org/r/20250102154024.2168165-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A build with W=1 fails because there are code and data that are not
needed or used when CONFIG_EFI is not set. Move the "#ifdef CONFIG_EFI"
block to earlier in the source file so that the unused code/data are
not built.
drivers/firmware/efi/sysfb_efi.c:345:39: warning: ‘efifb_fwnode_ops’ defined but not used [-Wunused-const-variable=]
345 | static const struct fwnode_operations efifb_fwnode_ops = {
| ^~~~~~~~~~~~~~~~
drivers/firmware/efi/sysfb_efi.c:238:35: warning: ‘efifb_dmi_swap_width_height’ defined but not used [-Wunused-const-variable=]
238 | static const struct dmi_system_id efifb_dmi_swap_width_height[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/firmware/efi/sysfb_efi.c:188:35: warning: ‘efifb_dmi_system_table’ defined but not used [-Wunused-const-variable=]
188 | static const struct dmi_system_id efifb_dmi_system_table[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~
Fixes: 15d27b15de ("efi: sysfb_efi: fix build when EFI is not set")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501071933.20nlmJJt-lkp@intel.com/
Cc: David Rheinsberg <david@readahead.eu>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Annotate some local buffer allocations as __free(efi_pool) and simplify
the associated error handling accordingly. This removes a couple of
gotos and simplifies the code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI stub may obtain the memory map from the firmware numerous times,
and this involves doing a EFI pool allocation first, which needs to be
freed after use.
Streamline this using a cleanup helper, which makes the code easier to
follow.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use LocateHandleBuffer() and a __free() cleanup helper to simplify the
PCI I/O handle buffer traversal code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI stub implements various ways of setting the resolution of the
EFI framebuffer at boot, and this duplicates a lot of boilerplate for
iterating over the supported modes and extracting the resolution and
color depth.
Refactor this into a single helper that takes a callback, and use it for
the 'auto', 'list' and 'res' selection methods.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use the LocateHandleBuffer() API and a __free() function to simplify the
logic that allocates a handle buffer to iterate over all GOP protocols
in the EFI database.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tweak the for_each_efi_handle() macro in order to avoid the need on the
part of the caller to provide a loop counter variable.
Also move efi_get_handle_num() to the callers, so that each occurrence
can be replaced with the actual number returned by the simplified
LocateHandleBuffer API.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
UGA is the EFI graphical output protocol that preceded GOP, and has been
long obsolete. Drop support for it from the x86 implementation of the
EFI stub - other architectures never bothered to implement it (save for
ia64)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We need the debugfs / driver-core fixes in here as well for testing and
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the IIO fixes in here as well, and it resolves a merge conflict
in:
drivers/iio/adc/ti-ads1119.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add helper functions for the SCM calls required to support
hardware-wrapped inline storage encryption keys. These SCM calls manage
wrapped keys via Qualcomm's Hardware Key Manager (HWKM), which can only
be accessed from TrustZone.
QCOM_SCM_ES_GENERATE_ICE_KEY and QCOM_SCM_ES_IMPORT_ICE_KEY create a new
long-term wrapped key, with the former making the hardware generate the
key and the latter importing a raw key. QCOM_SCM_ES_PREPARE_ICE_KEY
converts the key to ephemerally-wrapped form so that it can be used for
inline storage encryption. These are planned to be wired up to new
ioctls via the blk-crypto framework; see the proposed documentation for
the hardware-wrapped keys feature for more information.
Similarly there's also QCOM_SCM_ES_DERIVE_SW_SECRET which derives a
"software secret" from an ephemerally-wrapped key and will be wired up
to the corresponding operation in the blk_crypto_profile.
These will all be used by the ICE driver in drivers/soc/qcom/ice.c.
[EB: merged related patches, fixed error handling, fixed naming, fixed
docs for size parameters, fixed qcom_scm_has_wrapped_key_support(),
improved comments, improved commit message.]
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20241213041958.202565-9-ebiggers@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit ca61d6836e ("firmware: qcom: scm: fix a NULL-pointer
dereference") makes it explicit that qcom_scm_get_tzmem_pool() can
return NULL, therefore its users should handle this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-5-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If SCM driver fails the probe, it should not leave global '__scm'
variable assigned, because external users of this driver will assume the
probe finished successfully. For example TZMEM parts ('__scm->mempool')
are initialized later in the probe, but users of it (__scm_smc_call())
rely on the '__scm' variable.
This fixes theoretical NULL pointer exception, triggered via introducing
probe deferral in SCM driver with call trace:
qcom_tzmem_alloc+0x70/0x1ac (P)
qcom_tzmem_alloc+0x64/0x1ac (L)
qcom_scm_assign_mem+0x78/0x194
qcom_rmtfs_mem_probe+0x2d4/0x38c
platform_probe+0x68/0xc8
Fixes: 40289e35ca ("firmware: qcom: scm: enable the TZ mem allocator")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-4-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 2e4955167e ("firmware: qcom: scm: Fix __scm and waitq
completion variable initialization") introduced a write barrier in probe
function to store global '__scm' variable. We all known barriers are
paired (see memory-barriers.txt: "Note that write barriers should
normally be paired with read or address-dependency barriers"), therefore
accessing it from concurrent contexts requires read barrier. Previous
commit added such barrier in qcom_scm_is_available(), so let's use that
directly.
Lack of this read barrier can result in fetching stale '__scm' variable
value, NULL, and dereferencing it.
Note that barrier in qcom_scm_is_available() satisfies here the control
dependency.
Fixes: ca61d6836e ("firmware: qcom: scm: fix a NULL-pointer dereference")
Fixes: 449d0d84bc ("firmware: qcom: scm: smc: switch to using the SCM allocator")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-2-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 2e4955167e ("firmware: qcom: scm: Fix __scm and waitq
completion variable initialization") introduced a write barrier in probe
function to store global '__scm' variable. It also claimed that it
added a read barrier, because as we all known barriers are paired (see
memory-barriers.txt: "Note that write barriers should normally be paired
with read or address-dependency barriers"), however it did not really
add it.
The offending commit used READ_ONCE() to access '__scm' global which is
not a barrier.
The barrier is needed so the store to '__scm' will be properly visible.
This is most likely not fatal in current driver design, because missing
read barrier would mean qcom_scm_is_available() callers will access old
value, NULL. Driver does not support unbinding and does not correctly
handle probe failures, thus there is no risk of stale or old pointer in
'__scm' variable.
However for code correctness, readability and to be sure that we did not
mess up something in this tricky topic of SMP barriers, add a read
barrier for accessing '__scm'. Change also comment from useless/obvious
what does barrier do, to what is expected: which other parts of the code
are involved here.
Fixes: 2e4955167e ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization")
Cc: stable@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-1-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Constify the following API:
struct device *device_find_child(struct device *dev, void *data,
int (*match)(struct device *dev, void *data));
To :
struct device *device_find_child(struct device *dev, const void *data,
device_match_t match);
typedef int (*device_match_t)(struct device *dev, const void *data);
with the following reasons:
- Protect caller's match data @*data which is for comparison and lookup
and the API does not actually need to modify @*data.
- Make the API's parameters (@match)() and @data have the same type as
all of other device finding APIs (bus|class|driver)_find_device().
- All kinds of existing device match functions can be directly taken
as the API's argument, they were exported by driver core.
Constify the API and adapt for various existing usages.
BTW, various subsystem changes are squashed into this commit to meet
'git bisect' requirement, and this commit has the minimal and simplest
changes to complement squashing shortcoming, and that may bring extra
code improvement.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for drivers/pwm
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20241224-const_dfc_done-v5-4-6623037414d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver.
-----BEGIN PGP SIGNATURE-----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=UZKA
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver"
* tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
A single fix for the Auto Update driver, where a mistake in array
indexing (accessing as a u32 rather than a u8) caused the driver to read
the wrong feature disable bits.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZ2LxgQAKCRB4tDGHoIJi
0n4+AP0QYLOMoo9POBGKK2U9RSX5y9ItqvPAqtgbEtRarjt+bQD/Ql/7eho9DUmp
S0VM51BDrGz9P5otGKNqGgosasBr8wE=
=l4eA
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Bw5R
-----END PGP SIGNATURE-----
Merge tag 'riscv-soc-fixes-for-v6.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc driver fixes for v6.13-rc4
A single fix for the Auto Update driver, where a mistake in array
indexing (accessing as a u32 rather than a u8) caused the driver to read
the wrong feature disable bits.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
Link: https://lore.kernel.org/r/20241218-suffrage-unfazed-fa0113072a42@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Recent platforms require more slack slots than the current value of
EFI_MMAP_NR_SLACK_SLOTS, otherwise they fail to boot. The current
workaround is to append `efi=disable_early_pci_dma` to the kernel's
cmdline. So, bump up EFI_MMAP_NR_SLACK_SLOTS to 32 to allow those
platforms to boot with the aforementioned workaround.
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In cs_dsp_mock_xm_header_drop_from_regmap_cache() for the ADSP2 case read
the big-endian firmware word into a dedicated __be32 variable instead of
using the same u32 for both the big-endian and cpu-endian value.
Fixes: 41e78c0f44 ("firmware: cs_dsp: Add mock DSP memory map for KUnit testing")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241217113127.186736-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sysfs core now provides callback variants that explicitly take a
const pointer. Use them so the non-const variants can be removed.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-google-v1-4-e5c2808f5833@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The sysfs core now provides callback variants that explicitly take a
const pointer. Use them so the non-const variants can be removed.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-google-v1-3-e5c2808f5833@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-google-v1-2-e5c2808f5833@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-google-v1-1-e5c2808f5833@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Use the proper API instead of open coding it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
There are three small fixes for the soc tree:
- A devicetee fix for the Arm Juno reference machine, so allow more
interesting PCI configurations
- A build fix for SCMI firmware on the NXP i.MX platform
- A fix for a race condition in Arm FF-A firmware
-----BEGIN PGP SIGNATURE-----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=+t0h
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Three small fixes for the soc tree:
- devicetee fix for the Arm Juno reference machine, to allow more
interesting PCI configurations
- build fix for SCMI firmware on the NXP i.MX platform
- fix for a race condition in Arm FF-A firmware"
* tag 'soc-fixes-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: fvp: Update PCIe bus-range property
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
firmware: arm_scmi: Fix i.MX build dependency
Having 1280 bytes of local variables on the stack exceeds the limit
on 32-bit architectures:
drivers/firmware/cirrus/test/cs_dsp_test_bin.c: In function 'bin_patch_mixed_packed_unpacked_random':
drivers/firmware/cirrus/test/cs_dsp_test_bin.c:2097:1: error: the frame size of 1784 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Use dynamic allocation for the largest two here.
Fixes: dd0b6b1f29 ("firmware: cs_dsp: Add KUnit testing of bin file download")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241216121541.3455880-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in efivarfs
with a name that does not adhere to the NAME-GUID format
- Drop some unused code
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ17ajwAKCRAwbglWLn0t
XGkQAQCuIi5yPony5hJf6vrYXm7rnHN2NS9Wg7q3rKNR7TIGMQD/YHRdNJbJ4nO5
BrOVS4eVXvSzvWrYxB/W4EAMJ1uyLgs=
=LNFy
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format
- Drop some unused code
* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD
A single fix to address a possible race around setting ffa_dev->properties
in ffa_device_register() by updating ffa_device_register() to take all
the partition information received from the firmware and updating the
struct ffa_device accordingly before registering the device to the
bus/driver model in the kernel.
-----BEGIN PGP SIGNATURE-----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=MYqY
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmdcNgkACgkQYKtH/8kJ
Uicrxg//X9jyjwlv5ow0c3qQw0zlipVnRKyLARVt7et+6k9j1EKM1qI/3K0tAJuI
Lm8eOFclU3rNazkWXHt1LKnUgutre9XAKxrQyBMRF9yNSsKxjjIekVvnaWGFZ2TF
eSz5DL4fEQy1j6EDxM6wCpw84s/Sc2ApAWLQ75tZy+FU39pevFedlQdQ2nEAOdU0
gUkuUBvhIe+2P+br9rVPpzW+8njJHiM0Cal9sBAxjWSeHHVy2TlUkVpGdMfo5wzV
3B7zQ++ocfew2DbmEOYhHJi2pWbkidHkasM4I3B2fRAHrOAQ4G3aBsATXkvin+6G
pf40ZiXNd8CKER306yZ7y1Ii1BtwoFbrx6Qomll+IzIrSFlijffyleCtxxXK5nHr
9zQoJJjD+P8ks7BZvrCb/xesBFNe+bc1p9U+H216pUxL1MJgSctgZL6pSx6XFSZz
K/qFS0S1YWuFmt0TEa7dYf+c3g5nRlN4iNHigm/t0S2ZRsVLUoK50tPZE87h/LXl
Hizu/ajQMIQvXaYG5SaXnbCRE047+bCVnpyJ/1iUZe0vbWJYxQw8M0MemYF4jLvY
LXvfFutSfRrzDF7k/dEOAkutDKi7RoCPe3qk0gyUb7Y9ydhTTR7aN17ParrjFkNa
lVyZWFcpr0he8xjLx7/7M48GdxHfIawQMpTVgv3DeZE2F3jA5lI=
=Gaz7
-----END PGP SIGNATURE-----
Merge tag 'ffa-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.13
A single fix to address a possible race around setting ffa_dev->properties
in ffa_device_register() by updating ffa_device_register() to take all
the partition information received from the firmware and updating the
struct ffa_device accordingly before registering the device to the
bus/driver model in the kernel.
* tag 'ffa-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
Link: https://lore.kernel.org/r/20241210101113.3232602-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Test that the cs_dsp_client_ops callbacks are called when expected.
pre_run, post_run - when cs_dsp_run() is called.
pre_stop, post_stop - when cs_dsp_stop() is called
control_add - when a WMFW is loaded
control_remove - when cs_dsp_remove() is called
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-13-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add tests for various types of errors and illegal values in
wmfw files. This covers buffer overflows as well as general
unsupported field values.
There are several sets of test cases to cover various different
versions of the wmfw file format.
V0 format was only used on the earlier ADSP2 devices. It does
not have algorithm blocks.
V1 format is used on all ADSP2 versions. It added algorithm
blocks and firmware coefficient descriptor blocks. Strings
are stored in fixed-length arrays.
V2 format is used on all ADSP2 versions. It is similar to V1
but space for strings is variable-length with either an 8-bit
or 16-bit length field.
V3 format is used on Halo Core DSPs and is mostly identical to
the V3 format.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add tests for various types of errors and illegal values in
bin files. This covers buffer overflows as well as general
unsupported field values.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add KUnit test cases for control read/write.
Tests cases cover general reading and writing of controls:
1) Read/write at offset position in control.
2) Read/write of various lengths less than length of the control.
3) Rejecting illegal arguments.
The test cases are run for ADSP2 with 16-bit registers, ADSP2
with 32-bit registers and Halo Core with 32-bit registers. The
ADSP2 cases are further divided into runs for V1 and V2 format
WMFW files, because there are differences in how V1 and V2
defines controls.
The obsolete V0 format does not have controls, so no testing of
that format is needed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add KUnit test cases for the caching of control content.
The test cases can be divided into four groups:
1) The cache is correctly initialized when the firmware is first
downloaded.
2) Reads return the correct data.
3) Writes update the registers and cache.
4) If a value has been written to the control it is retained in
the cache and written out to the registers when the firmware
is started.
There are multiple test suites to cover:
- V1 and V2 format files on 16-bit and 32-bit ADSP2.
- V3 format files on Halo Core DSPs.
V1 format files, and some V2 format files, didn't provide access
flags for the controls. There are a couple of test cases for
unspecified flags to ensure backwards compatibility with the
original implementation of these older firmware versions.
The obsolete V0 format does not have controls, so no testing of
that format is needed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add KUnit test cases for parsing of firmware controls out of the
wmfw. These test cases are only testing that the data in the wmfw
is correctly interpreted and entered into the list of controls.
The test cases can be roughly divided into three types:
1) The correct values are extracted from the wmfw.
2) Variable-length strings are handled correctly.
3) Controls are correctly identified as unique or identical.
There are multiple test suites to cover:
- V1 and V2 format files on 16-bit and 32-bit ADSP2.
- V3 format files on Halo Core DSPs.
V1 format does not have named controls, and the strings in the
coefficient descriptor are fixed-length fields. On V2 and V3 format
the controls are named and all strings are variable-length.
The obsolete V0 format does not have controls, so no testing of
that format is needed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a KUnit test suite to test downloading wmfw files.
The general technique is
1. Create mock wmfw file content
2. Tell cs_dsp to download the wmfw file
3. Check in the emulated regmap registers that the correct values have
been written to DSP memory
4. Drop the regmap cache for the expected written registers and then do a
regcache_sync() to check for unexpected writes to other registers.
The test covers ADSP2 v1 and v2, and HALO Core DSPs. (ADSP1 is very
obsolete so isn't tested).
There is a large number of test cases and parameterized variants of tests
because of the many different addressing schemes supported by the Cirrus
devices. The DSP has 2 or 3 memory spaces: XM, YM and ZM. The DSP sees
these using its native addressing, which is word-addressed (not
byte-addressed). The host sees these through one of several register
mappings (depending on the DSP type and parent codec family). The
registers have three different addressing schemes: 16-bit registers
addressed by register number, 32-bit registers addressed by register
number, or 32-bit registers addressed by byte (with a stride of 4). In
addition to these multiple addressing schemes, the Halo Core DSPs have a
"packed" register mapping that maps 4 DSP words into 3 registers. In
addition to this there are 4 versions of the wmfw file format to be
tested.
The test cases intentionally have relatively little factoring-out of
similar code. This makes it much easier to visually verify that a test
case is testing correctly, and what exactly it is testing. Factoring out
large amounts of code into helper functions tends to obscure what the
actual test procedure is, so increasing the chance of hidden errors where
test cases don't actually test as intended.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a KUnit test suite to test downloading bin files.
The general technique is
1. Create mock bin file content
2. Tell cs_dsp to download the bin file
3. Check in the emulated regmap registers that the correct values have
been written to DSP memory
4. Drop the regmap cache for the expected written registers and then do a
regcache_sync() to check for unexpected writes to other registers.
The test covers ADSP2 v1 and v2, and HALO Core DSPs. (ADSP1 is very
obsolete so isn't tested).
There is a large number of test cases and parameterized variants of tests
because of the many different addressing schemes supported by the Cirrus
devices. The DSP has 2 or 3 memory spaces: XM, YM and ZM. The DSP sees
these using its native addressing, which is word-addressed (not
byte-addressed). The host sees these through one of several register
mappings (depending on the DSP type and parent codec family). The
registers have three different addressing schemes: 16-bit registers
addressed by register number, 32-bit registers addressed by register
number, or 32-bit registers addressed by byte (with a stride of 4). In
addition to these multiple addressing schemes, the Halo Core DSPs have a
"packed" register mapping that maps 4 DSP words into 3 registers. The bin
file addresses the data blob relative to the base address of an algorithm,
which has to be calculated in both DSP words (for the DSP to access) and
register addresses (for the host).
This results in many different addressing schemes used in parallel, hence
the complexity of the address and size manipulation in the test cases:
word addresses in DSP memory, byte offsets, word offsets, register
addresses (either byte-addressed 32-bit or index-addressed 16-bit), and
packed register addresses.
The test cases intentionally have relatively little factoring-out of
similar code. This makes it much easier to visually verify that a test
case is testing correctly, and what exactly it is testing. Factoring out
large amounts of code into helper functions tends to obscure what the
actual test procedure is, so increasing the chance of hidden errors where
test cases don't actually test as intended.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a mock firmware file that emulates what the firmware build tools
would normally create. This will be used by KUnit tests to generate a
test bin file.
The data payload in a bin is an opaque blob, so the mock bin only needs
to generate the appropriate file header and description block for each
payload blob.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a mock firmware file that emulates what the firmware build tools
would normally create. This will be used by KUnit tests to generate a
test wmfw file.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper functions to implement an emulation of the DSP memory map.
There are three main groups of functionality:
1. Define a mock cs_dsp_region table.
2. Calculate the addresses of memory and algorithms from the firmware
header in XM.
3. Build a mock XM header in emulated XM.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a mock regmap implementation to act as a simulated DSP for KUnit
testing. This is built as a utility module so that it could be used by
clients of cs_dsp to create a mock "DSP" for their own testing.
cs_dsp interacts with the DSP only through registers. Most of the
register space of the DSP is RAM. ADSP cores have a small set of control
registers. HALO Core DSPs have a much larger set of control registers but
only a small subset are used.
Most writes are "blind" in the sense that cs_dsp does not expect to
receive any sort of response from the DSP. So there isn't any need to
emulate a "DSP", only a set of registers that can be written and read
back.
The idea of the mock regmap is to use the cache to accumulate writes
which can then be tested against the values that are expected to be in
the registers.
Stray writes can be detected by dropping the cache entries for all
addresses that should have been written and then issuing a regcache_sync().
If this causes bus writes it means there were writes to unexpected
registers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
esre_attribute::store() is not needed since commit af97a77bc0 (efi:
Move some sysfs files to be read-only by root). Drop it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
SCMI transports when built as loadable modules should be loaded by the
subsystem they plug into, based on the related subsystem specific aliases.
Add, where missing, the MODULE_DEVICE_TABLE() directives needed to generate
the aliases required to enable autoloading for SCMI transports.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241209164957.1801886-4-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Using the pattern 'scmi-protocol-0x<PROTO_ID>-<VEND_ID>' as MODULE_ALIAS
allows the SCMI core to autoload this protocol, if built as a module, when
its protocol operations are requested by an SCMI driver.
Cc: Peng Fan <peng.fan@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241209164957.1801886-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI vendor protocols namespace is shared amongst all vendors so that there
can be multiple implementation for the same protocol ID by different
vendors, exposing completely different functionalities and used by distinct
SCMI vendor drivers.
For these reasons, at runtime, when some driver asks for a protocol, the
proper implementation to use is chosen based on the SCMI vendor/subvendor/
impl_version data as advertised by the platform SCMI server and gathered
from the SCMI core during stack initialization: this enables proper runtime
selection of vendor protocols even when many different protocols from
different vendors are built into the same image via a common defconfig.
This same selection mechanism works similarly well even when all the vendor
protocols are compiled as loadable modules, as long as all such required
protocol modules have been previously loaded by some other means.
Add support for the automatic loading of vendor protocol modules, based on
protocol/vendor IDs, when an SCMI driver attempts to use such a protocol.
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZytnRc94iKUfMYH0@hovoldconsulting.com/
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241209164957.1801886-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Fix for the build issue in the ASoC driver with the SCMI support by
enforcing the link-time dependency if IMX_SCMI_MISC_DRV is a loadable
module but not if that is disabled.
-----BEGIN PGP SIGNATURE-----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=QBF6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=B7MA
-----END PGP SIGNATURE-----
Merge tag 'scmi-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fix for v6.13
Fix for the build issue in the ASoC driver with the SCMI support by
enforcing the link-time dependency if IMX_SCMI_MISC_DRV is a loadable
module but not if that is disabled.
* tag 'scmi-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix i.MX build dependency
Link: https://lore.kernel.org/r/20241205114348.708618-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Default SCMI transport properties values can be overridden with devicetree
provided descriptors; in order to support multiple SCMI instances, make the
properties-update happen on a per-instance copy of the original transport
descriptor.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241203193544.3895173-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
For historical reasons, the legacy decompressor code on various
architectures supports 7 different compression types for the compressed
kernel image.
EFI zboot is not a compression library museum, and so the options can be
limited to what is likely to be useful in practice:
- GZIP is tried and tested, and is still one of the fastest at
decompression time, although the compression ratio is not very high;
moreover, Fedora is already shipping EFI zboot kernels for arm64 that
use GZIP, and QEMU implements direct support for it when booting a
kernel without firmware loaded;
- ZSTD has a very high compression ratio (although not the highest), and
is almost as fast as GZIP at decompression time.
Reducing the number of options makes it less of a hassle for other
consumers of the EFI zboot format (such as QEMU today, and kexec in the
future) to support it transparently without having to carry 7 different
decompression libraries.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
To verify that Auto Update is possible, the mpfs_auto_update_state()
function performs a "Query Security Service Request" to the system
controller.
Previously, the check was performed on the first element of the
response message, which was accessed using a 32-bit pointer. This
caused the bitwise operation to reference incorrect data, as the
response should be inspected at the byte level. Fixed this by casting
the response to a u8 * pointer, ensuring the check correctly inspects
the appropriate byte of the response message.
Additionally, rename "UL_Auto Update" to "UL_IAP" to match the
PolarFire Family System Services User Guide.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Currently, ffa_dev->properties is set after the ffa_device_register()
call return in ffa_setup_partitions(). This could potentially result in
a race where the partition's properties is accessed while probing
struct ffa_device before it is set.
Update the ffa_device_register() to receive ffa_partition_info so all
the data from the partition information received from the firmware can
be updated into the struct ffa_device before the calling device_register()
in ffa_device_register().
Fixes: e781858488 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Message-Id: <20241203143109.1030514-2-yeoreum.yun@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The newly added SCMI vendor driver references functions in the
protocol driver but needs a Kconfig dependency to ensure it can link,
essentially the Kconfig dependency needs to be reversed to match the
link time dependency:
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_write':
| fsl_mqs.c:(.text+0x1aa): undefined reference to `scmi_imx_misc_ctrl_set'
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_read':
| fsl_mqs.c:(.text+0x1ee): undefined reference to `scmi_imx_misc_ctrl_get'
This however only works after changing the dependency in the SND_SOC_FSL_MQS
driver as well, which uses 'select IMX_SCMI_MISC_DRV' to turn on a
driver it depends on. This is generally a bad idea, so the best solution
is to change that into a dependency.
To allow the ASoC driver to keep building with the SCMI support, this
needs to be an optional dependency that enforces the link-time
dependency if IMX_SCMI_MISC_DRV is a loadable module but not
depend on it if that is disabled.
Fixes: 61c9f03e22 ("firmware: arm_scmi: Add initial support for i.MX MISC protocol")
Fixes: 101c902359 ("ASoC: fsl_mqs: Support accessing registers by scmi interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Message-Id: <20241115230555.2435004-1-arnd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Here is the "big and hairy" char/misc/iio and other small driver
subsystem updates for 6.13-rc1. Sorry for doing this at the end of the
merge window, conference and holiday travel got in the way on my side
(hence the 5am pull request emails...)
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible. I think this is the tipping point,
expect to see way more rust drivers going forward now that these
bindings are present. Next merge window hopefully we will have pci
and platform drivers working, which will fully enable almost all
driver subsystems to start accepting (or at least getting) rust
drivers. This is the end result of a lot of work from a lot of
people, congrats to all of them for getting this far, you've proved
many of us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
Note, there is a semi-hairy rust merge conflict when pulling this. The
resolution has been in linux-next for a while and can be seen here:
https://lore.kernel.org/all/20241111173459.2646d4af@canb.auug.org.au/
All of these have been in linux-next for a while, with no other reported
issues other than that merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKHQCgvI4Muu2tpdINBVe24Zc8S3ozg0AAnRNg3F7r
ikneftUDYtuviSGU/Rs8
=CW+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
essentially guessing which pfns are refcounted pages. The reason to
do so was that KVM needs to map both non-refcounted pages (for example
BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP VMAs that contain
refcounted pages. However, the result was security issues in the past,
and more recently the inability to map VM_IO and VM_PFNMAP memory
that _is_ backed by struct page but is not refcounted. In particular
this broke virtio-gpu blob resources (which directly map host graphics
buffers into the guest as "vram" for the virtio-gpu device) with the
amdgpu driver, because amdgpu allocates non-compound higher order pages
and the tail pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the per-architecture
code, to always work on the pfn whenever possible. The large series that
did this, from David Stevens and Sean Christopherson, also cleaned up
substantially the set of functions that provided arch code with the
pfn for a host virtual addresses. The previous maze of twisty little
passages, all different, is replaced by five functions (__gfn_to_page,
__kvm_faultin_pfn, the non-__ versions of these two, and kvm_prefetch_pages)
saving almost 200 lines of code.
ARM:
* Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
* Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
was introduced in PSCIv1.3 as a mechanism to request hibernation,
similar to the S4 state in ACPI
* Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
* PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
* Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
* Avoid emulated MMIO completion if userspace has requested synchronous
external abort injection
* Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
* Add iocsr and mmio bus simulation in kernel.
* Add in-kernel interrupt controller emulation.
* Add support for virtualization extensions to the eiointc irqchip.
PPC:
* Drop lingering and utterly obsolete references to PPC970 KVM, which was
removed 10 years ago.
* Fix incorrect documentation references to non-existing ioctls
RISC-V:
* Accelerate KVM RISC-V when running as a guest
* Perf support to collect KVM guest statistics from host side
s390:
* New selftests: more ucontrol selftests and CPU model sanity checks
* Support for the gen17 CPU model
* List registers supported by KVM_GET/SET_ONE_REG in the documentation
x86:
* Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve
documentation, harden against unexpected changes. Even if the hardware
A/D tracking is disabled, it is possible to use the hardware-defined A/D
bits to track if a PFN is Accessed and/or Dirty, and that removes a lot
of special cases.
* Elide TLB flushes when aging secondary PTEs, as has been done in x86's
primary MMU for over 10 years.
* Recover huge pages in-place in the TDP MMU when dirty page logging is
toggled off, instead of zapping them and waiting until the page is
re-accessed to create a huge mapping. This reduces vCPU jitter.
* Batch TLB flushes when dirty page logging is toggled off. This reduces
the time it takes to disable dirty logging by ~3x.
* Remove the shrinker that was (poorly) attempting to reclaim shadow page
tables in low-memory situations.
* Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE.
* Advertise CPUIDs for new instructions in Clearwater Forest
* Quirk KVM's misguided behavior of initialized certain feature MSRs to
their maximum supported feature set, which can result in KVM creating
invalid vCPU state. E.g. initializing PERF_CAPABILITIES to a non-zero
value results in the vCPU having invalid state if userspace hides PDCM
from the guest, which in turn can lead to save/restore failures.
* Fix KVM's handling of non-canonical checks for vCPUs that support LA57
to better follow the "architecture", in quotes because the actual
behavior is poorly documented. E.g. most MSR writes and descriptor
table loads ignore CR4.LA57 and operate purely on whether the CPU
supports LA57.
* Bypass the register cache when querying CPL from kvm_sched_out(), as
filling the cache from IRQ context is generally unsafe; harden the
cache accessors to try to prevent similar issues from occuring in the
future. The issue that triggered this change was already fixed in 6.12,
but was still kinda latent.
* Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM
over-advertises SPEC_CTRL when trying to support cross-vendor VMs.
* Minor cleanups
* Switch hugepage recovery thread to use vhost_task. These kthreads can
consume significant amounts of CPU time on behalf of a VM or in response
to how the VM behaves (for example how it accesses its memory); therefore
KVM tried to place the thread in the VM's cgroups and charge the CPU
time consumed by that work to the VM's container. However the kthreads
did not process SIGSTOP/SIGCONT, and therefore cgroups which had KVM
instances inside could not complete freezing. Fix this by replacing the
kthread with a PF_USER_WORKER thread, via the vhost_task abstraction.
Another 100+ lines removed, with generally better behavior too like
having these threads properly parented in the process tree.
* Revert a workaround for an old CPU erratum (Nehalem/Westmere) that didn't
really work; there was really nothing to work around anyway: the broken
patch was meant to fix nested virtualization, but the PERF_GLOBAL_CTRL
MSR is virtualized and therefore unaffected by the erratum.
* Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is 'y'.
x86 selftests:
* x86 selftests can now use AVX.
Documentation:
* Use rST internal links
* Reorganize the introduction to the API document
Generic:
* Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead
of RCU, so that running a vCPU on a different task doesn't encounter long
due to having to wait for all CPUs become quiescent. In general both reads
and writes are rare, but userspace that supports confidential computing is
introducing the use of "helper" vCPUs that may jump from one host processor
to another. Those will be very happy to trigger a synchronize_rcu(), and
the effect on performance is quite the disaster.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmc9MRYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP00QgArxqxBIGLCW5t7bw7vtNq63QYRyh4
dTiDguLiYQJ+AXmnRu11R6aPC7HgMAvlFCCmH+GEce4WEgt26hxCmncJr/aJOSwS
letCS7TrME16PeZvh25A1nhPBUw6mTF1qqzgcdHMrqXG8LuHoGcKYGSRVbkf3kfI
1ZoMq1r8ChXbVVmCx9DQ3gw1TVr5Dpjs2voLh8rDSE9Xpw0tVVabHu3/NhQEz/F+
t8/nRaqH777icCHIf9PCk5HnarHxLAOvhM2M0Yj09PuBcE5fFQxpxltw/qiKQqqW
ep4oquojGl87kZnhlDaac2UNtK90Ws+WxxvCwUmbvGN0ZJVaQwf4FvTwig==
=lWpE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending the
set of supported features for additional SoCs in the QSEECOM, LLCC
and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip
sparx5 and amlogic reset drivers to support additional chips,
plus a few minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus,
and drivers/memory, including changing back the .remove_new callback
to .remove, as well as a few other updates for freescale (powerpc)
soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory
controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers
-----BEGIN PGP SIGNATURE-----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=xeCE
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
