This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Ensure the current pin frequency is always present in the list of
supported frequencies reported to userspace. Previously, if the
firmware node was missing or didn't include the current operating
frequency in the supported-frequencies-hz property, the pin would
report a frequency that wasn't in its supported list.
Get the current frequency early in zl3073x_pin_props_get():
- For input pins: use zl3073x_dev_ref_freq_get()
- For output pins: use zl3073x_dev_output_pin_freq_get()
Place the current frequency at index 0 of the supported frequencies
array, then append frequencies from the firmware node (if present),
skipping any duplicate of the current frequency.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260205154350.3180465-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add parsing for the "mux" string in the 'connection-type' pin property
mapping it to DPLL_PIN_TYPE_MUX.
Recognizing this type in the driver allows these pins to be taken as
parent pins for pin-on-pin pins coming from different modules (e.g.
network drivers).
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-6-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the zl3073x driver by splitting the logic for input
references, outputs and synthesizers out of the monolithic
core.[ch] files.
Move the logic for each functional block into its own dedicated files:
ref.[ch], out.[ch] and synth.[ch].
Specifically:
- Move state structures (zl3073x_ref, zl3073x_out, zl3073x_synth)
from core.h into their respective new headers
- Move state-fetching functions (..._state_fetch) from core.c to their
new .c files
- Move the zl3073x_ref_freq_factorize helper from core.c to ref.c
- Introduce a new helper layer to decouple the core device logic from
the state-parsing logic:
1. Move the original inline helpers (e.g., zl3073x_ref_is_enabled)
to the new headers (ref.h, etc.) and make them operate on a
const struct ... * pointer.
2. Create new zl3073x_dev_... prefixed functions in core.h
(e.g., zl3073x_dev_ref_is_enabled) and Implement these _dev_ functions
to fetch state using a new ..._state_get() helper and then call
the non-prefixed helper.
3. Update all driver-internal callers (in dpll.c, prop.c, etc.) to use
the new zl3073x_dev_... functions.
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251113074105.141379-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Output pins phase adjustment values in the device are expressed
in half synth clock cycles. Use this number of cycles as output
pins' phase adjust granularity and simplify both get/set callbacks.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20251029153207.178448-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for getting and setting input pin priority. Implement
required callbacks and set appropriate capability for input pins.
Although the pin priority make sense only if the DPLL is running in
automatic mode we have to expose this capability unconditionally because
input pins (references) are shared between all DPLLs where one of them
can run in automatic mode while the other one not.
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250704182202.1641943-11-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement input pin state setting if the DPLL is running in manual mode.
The driver indicates manual mode if the DPLL mode is one of ref-lock,
forced-holdover, freerun.
Use these modes to implement input pin state change between connected
and disconnected states. When the user set the particular pin as
connected the driver marks this input pin as forced reference and
switches the DPLL mode to ref-lock. When the use set the pin as
disconnected the driver switches the DPLL to freerun or forced holdover
mode. The switch to holdover mode is done if the DPLL has holdover
capability (e.g is currently locked with holdover acquired).
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250704182202.1641943-10-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for reading of DPLL types and optional pin properties from
the system firmware (DT, ACPI...).
The DPLL types are stored in property 'dpll-types' as string array and
possible values 'pps' and 'eec' are mapped to DPLL enums DPLL_TYPE_PPS
and DPLL_TYPE_EEC.
The pin properties are stored under 'input-pins' and 'output-pins'
sub-nodes and the following ones are supported:
* reg
integer that specifies pin index
* label
string that is used by driver as board label
* connection-type
string that indicates pin connection type
* supported-frequencies-hz
array of u64 values what frequencies are supported / allowed for
given pin with respect to hardware wiring
Do not blindly trust system firmware and filter out frequencies that
cannot be configured/represented in device (input frequencies have to
be factorized by one of the base frequencies and output frequencies have
to divide configured synthesizer frequency).
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250704182202.1641943-8-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
