Pull clk patches from Brian Masney:
- New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
bindings. Si549 support was added to the existing si544 driver.
- New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
EN7523 PCIe PERSTOUT reset lines.
- The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
the existing optional variant, and exports
devm_clk_hw_register_composite_pdata() for modular drivers.
- Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
charge pump/lock parameter programming during dynamic reconfiguration.
- Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
registration failure, a prepare reference leak in the palmas driver,
unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
clocking-wizard clock difference detection bug.
- Various cleanups across tegra, st, and mvebu providers to stop misusing the
consumer clock API, along with other minor fixes and improvements.
Signed-off-by: Brian Masney <bmasney@redhat.com>
* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
clk: aspeed: add AST2700 PECI clock
dt-bindings: clock: ast2700: add PECI clock
clk: mediatek: Add mt8173-mfgtop driver
dt-bindings: clock: mediatek: Add mt8173 mfgtop
clk: tegra: clean-up simple provider misuse of the consumer API
clk: st: clean-up simple provider misuse of the consumer API
clk: mvebu: clean-up simple provider misuse of the consumer API
clk: remove conditional return with no effect
clk: Add devm_clk_bulk_get_enable()
clk: en7523: add support for dedicated PCIe PERSTOUT reset
dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
arm64: dts: cix: sky1: add audss cru
reset: cix: add sky1 audss auxiliary reset driver
...
Replace the open-coded platform_get_resource() plus devm_ioremap()
sequence with devm_platform_ioremap_resource(), which fetches the
resource, requests the region and maps it in one call. Switch the error
check to IS_ERR()/PTR_ERR() and drop the now-unused struct resource
pointer.
The only in-tree user (stub_clock@e896b500 in hi3660.dtsi) has a single
0x100-byte reg region, so the region reservation added by
devm_ioremap_resource() is exclusive and does not introduce overlap
failures.
Built for ARM (drivers/clk/hisilicon/clk-hi3660-stub.o) with LLVM=1.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Signed-off-by: Brian Masney <bmasney@redhat.com>
The HiSilicon clock symbols already depend on ARCH_HISI or COMPILE_TEST,
but the parent clock Makefile only descends into the hisilicon directory
when ARCH_HISI is enabled.
Add a hidden family gate selected by the HiSilicon clock and reset symbols,
default it for ARCH_HISI, and use it for the parent Makefile descent. This
keeps existing platform builds unchanged while allowing compile-test
coverage.
Tested with:
make LLVM=1 ARCH=loongarch drivers/clk/hisilicon/
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Using devm_kmalloc() does not zero-initialize the allocated structure.
Uninitialized members in struct hisi_reset_controller may contain garbage
data, which can cause reset_controller_register() to fail unexpectedly.
Replace devm_kmalloc() with devm_kzalloc() to ensure all structure fields
are properly zero-initialized.
Fixes: 97b7129cd2 ("reset: hisilicon: change the definition of hisi_reset_init")
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Min zhang <zhangmin2026@yeah.net>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Unmap 'base' if an error occurs after it has been mapped.
Reported-by: Tao Lan <taolan@huawei.com>
Closes: https://lore.kernel.org/lkml/ZNlSH+eWV8Sk3FYn@probook/
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Combine allocations using kzalloc_flex and a flexible array member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 619a6210f3 ("clk: hisilicon: clkdivider-hi6220: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
When trying to use Coccinelle to make changes inside drivers/clk/, it
really does not like the trailing comma at the end of the declaration
of DEFINE_CLK_STUB, and fails to process this file. It also looks weird
to not have commas to separate the various array members of
hi3660_stub_clks. Let's move the trailing comma out of the define so
that Coccinelle can be ran against this source file.
Signed-off-by: Brian Masney <bmasney@redhat.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all clk drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240909144026.870565-2-u.kleine-koenig@baylibre.com
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The local u64 variable refdiv_val has the same value as the local u32
variable val and can be removed. Remove it and use val directly as the
divisor to also remove the following Coccinelle/coccicheck warning
reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead
Use the preferred div_u64() function instead of the do_div() macro.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240801103616.20430-1-thorsten.blum@toblux.com
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific devm_kcalloc() function instead of the
argument size * count in the devm_kzalloc() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Link: https://lore.kernel.org/r/20240121142946.2796-1-erick.archer@gmx.com
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
'p_clk' is an array allocated just before the for loop for all clk that
need to be registered.
It is incremented at each loop iteration.
If a clk_register() call fails, 'p_clk' may point to something different
from what should be freed.
The best we can do, is to avoid this wrong release of memory.
Fixes: 6c81966107 ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/773fc8425c3b8f5b0ca7c1d89f15b65831a85ca9.1705850155.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In cases where kcalloc() fails for the 'clk_data->clks' allocation, the
code path does not handle the failure gracefully, potentially leading
to a memory leak. This fix ensures proper cleanup by freeing the
allocated memory for 'clk_data' before returning.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20231210165040.3407545-1-visitorckw@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org
Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
are a couple patches to the core clk framework, but they're all basically
cleanups or debugging aids. The driver updates and new additions are dominated
in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of
new drivers for various SoCs, and MediaTek gained a bunch of drivers for
MT8188. The MediaTek drivers are being modernized as well, so there are
updates all over that vendor's clk drivers. There's also a couple other new clk
drivers in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual collection of
non-critical fixes and cleanups to various clk drivers. It's good to see that
we're getting more cleanups and modernization patches. Maybe one day we'll be
able to properly split clk providers from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to
get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code to
common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm SM6375,
MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmRMbQURHHNib3lkQGtl
cm5lbC5vcmcACgkQrQKIl8bklSUvyw//Vcqg0h8s+9npz0JsW+nffAXRguy1jum6
tj10++zA+NBhKxmfhyOs/v9UK1nb2DXAhcTIjUDcTDkVy0b2pBUQoGEGMyy9TLve
q4MfWx7CwKwASUG2Lr3f1n4qi/vT4PEDlvYzUO94p7c6Y6f6P4JHTCJlJR7cNb4o
MyXgiXMxQGaxT0XucSR9J32VxqSbF9KQvb8q+tPV3CDMIWi96aO5ZyewY6KF8a/7
chdXKYQXaYYG4/q4lNjZuvNQ2jidWqp0NlNw7M96U7SK5ESBryk4B4d1/J+QtzxX
cuBTF1eoTKYlS3kPhhsuOhbsDi2SFE6D75ps5i9Y57ezSdS9qFcUsaNzUiN6t9ng
uW+MRBTz20JDKBTLk6vD75O63fVDg3KG+kkLaF0Ax1Xa99sbrgBdNkPQ0Iu2AbSh
assUmbz3s9MaPWj8LpOKLmactm4GbrQ2wtCEjguuynjaFoPUuyunReNkZ1yxfUUl
MjRIYpvqVvYp29xHlBjN2cgttHjqVCBg8y7Io6RQonbIvnuN7Zo2cu+vbF7w7mdR
2HtGBe/OFsnZmmsr0pIGQOU25otheIHPudEYLlXEKx03FaMzAXnnDe9f6xXWaWxk
Wz0YBofejlkP9ycLjRas2BZo3T66TtAlbQH2UhrSpJZV02Jwfi+JwBaLi9dOwZ7O
VL5HI5FSlG8=
=bTtL
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Nothing looks out of the ordinary in this batch of clk driver updates.
There are a couple patches to the core clk framework, but they're all
basically cleanups or debugging aids. The driver updates and new
additions are dominated in the diffstat by Qualcomm and MediaTek
drivers. Qualcomm gained a handful of new drivers for various SoCs,
and MediaTek gained a bunch of drivers for MT8188. The MediaTek
drivers are being modernized as well, so there are updates all over
that vendor's clk drivers. There's also a couple other new clk drivers
in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual
collection of non-critical fixes and cleanups to various clk drivers.
It's good to see that we're getting more cleanups and modernization
patches. Maybe one day we'll be able to properly split clk providers
from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574,
MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent
failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
to get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code
to common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm
SM6375, MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip
rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: rockchip: rk3588: make gate linked clocks critical
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
clk: qcom: add the GPUCC driver for sa8775p
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
clk: starfive: Avoid casting iomem pointers
clk: microchip: fix potential UAF in auxdev release callback
clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
clk: mediatek: fhctl: Mark local variables static
clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
...
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230312161512.2715500-18-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20230222121453.91915-13-nick.alcock@oracle.com
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
Fixes: 6c81966107 ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218000922.134857-4-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clk-hi3559a driver uses functions from reset.c so it should
select RESET_HISI to avoid build errors.
Fixes these build errors:
aarch64-linux-ld: drivers/clk/hisilicon/clk-hi3559a.o: in function `hi3559av100_crg_remove':
clk-hi3559a.c:(.text+0x158): undefined reference to `hisi_reset_exit'
aarch64-linux-ld: drivers/clk/hisilicon/clk-hi3559a.o: in function `hi3559av100_crg_probe':
clk-hi3559a.c:(.text+0x1f4): undefined reference to `hisi_reset_init'
aarch64-linux-ld: clk-hi3559a.c:(.text+0x238): undefined reference to `hisi_reset_exit'
Fixes: 6c81966107 ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Link: https://lore.kernel.org/r/20210717043159.12566-1-rdunlap@infradead.org
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This driver is a platform driver. The probe function can be called after
kernel init, and try to reference kernel memory that has been freed.
Drop the __init markings everywhere here to avoid referencing initdata
from non-init code. Fixes modpost warnings.
Reported-by: kernel test robot <lkp@intel.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Fixes: 6c81966107 ("clk: hisilicon: Add clock driver for hi3559A SoC")
Link: https://lore.kernel.org/r/20210630185839.3680834-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add clock drivers for hi3559A SoC, this driver
controls the SoC registers to supply different
clocks to different IPs in the SoC.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Link: https://lore.kernel.org/r/1616498973-47067-3-git-send-email-gengdongjiu1@gmail.com
[sboyd@kernel.org: Mark arrays static, add __iomem, drop unused array,
avoid kfree of devm memory]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Prepare Armada 3700 for suspend to RAM by moving suspend/resume priority for PCIe
- Drop unused variables, enums, etc. in various clk drivers
- Convert various drivers to use devm_platform_ioremap_resource()
* clk-rohm:
clk: bd718x7: Add MODULE_ALIAS()
* clk-hisilicon:
clk: hisilicon: fix sparse warnings in clk-hi3660.c
clk: hisilicon: fix sparse warnings in clk-hi3670.c
* clk-marvell:
dt-bindings: clk: armada3700: document the PCIe clock
dt-bindings: clk: armada3700: fix typo in SoC name
clk: mvebu: armada-37xx-periph: change suspend/resume time
clk: mvebu: armada-37xx-periph: add PCIe gated clock
* clk-unused:
clk: armada-xp: remove unused code
clk: imx: imx8mn: drop unused pll enum
clk: ast2600: remove unused variable 'eclk_parent_names'
* clk-devm-ioremap-resource:
clk: sprd: Change to use devm_platform_ioremap_resource()
clk: s3c2410: use devm_platform_ioremap_resource() to simplify code
clk: axs10x: use devm_platform_ioremap_resource() to simplify code
clk: mediatek: mt6797: use devm_platform_ioremap_resource() to simplify code
clk: mediatek: mt7629: use devm_platform_ioremap_resource() to simplify code
clk: mediatek: mt7622: use devm_platform_ioremap_resource() to simplify code
clk: mediatek: mt8183: use devm_platform_ioremap_resource() to simplify code
clk: mediatek: mt6779: use devm_platform_ioremap_resource() to simplify code
clk: mediatek: mt2712: use devm_platform_ioremap_resource() to simplify code
clk: davinci: use devm_platform_ioremap_resource() to simplify code
clk: hisilicon: use devm_platform_ioremap_resource() to simplify code
clk: bcm2835: use devm_platform_ioremap_resource() to simplify code
As now we also need to probe in the reset driver as well.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20191001182546.70090-1-john.stultz@linaro.org
[sboyd@kernel.org: Add comment about reset driver]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fix sparse warnings of a 0 being used for a pointer by removing it from
the initialiser.
drivers/clk/hisilicon/clk-hi3660.c:336:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:338:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:340:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:342:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:344:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:346:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:348:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:350:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:352:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:354:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:356:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:358:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:360:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:362:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:364:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:366:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:368:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:370:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:372:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:374:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:376:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:378:71: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:423:68: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:425:68: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:427:68: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:429:68: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:449:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:451:71: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:453:71: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3660.c:455:71: warning: Using plain integer as NULL pointer
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lkml.kernel.org/r/20190925112347.14141-2-ben.dooks@codethink.co.uk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fix the following warnings from sparse by removing the 0 initialiser
that is actually a pointer.
drivers/clk/hisilicon/clk-hi3670.c:298:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:300:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:302:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:304:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:306:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:308:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:310:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:312:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:314:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:316:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:318:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:320:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:322:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:324:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:326:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:328:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:330:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:332:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:334:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:336:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:338:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:340:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:342:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:344:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:346:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:348:65: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:350:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:352:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:488:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:490:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:492:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:494:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:496:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:498:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:500:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:502:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:504:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:506:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:508:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:510:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:512:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:514:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:516:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:518:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:520:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:522:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:524:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:526:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:528:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:530:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:532:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:534:71: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:536:71: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:538:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:611:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:614:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:616:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:653:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:655:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:657:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:659:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:661:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:663:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:665:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:735:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:737:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:739:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:741:63: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:743:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:745:64: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:802:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:804:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:806:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:808:69: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:810:70: warning: Using plain integer as NULL pointer
drivers/clk/hisilicon/clk-hi3670.c:812:69: warning: Using plain integer as NULL pointer
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lkml.kernel.org/r/20190925112347.14141-1-ben.dooks@codethink.co.uk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 101 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see http www gnu org licenses
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details [based]
[from] [clk] [highbank] [c] you should have received a copy of the
gnu general public license along with this program if not see http
www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 355 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
51 franklin street fifth floor boston ma 02110 1301 usa
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option [no]_[pad]_[ctrl] any later version this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin street fifth floor boston ma
02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 176 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs
- Support for Cirrus Logic Lochnagar clks
* clk-hisi:
clk: hi3660: Mark clk_gate_ufs_subsys as critical
* clk-lochnagar:
clk: lochnagar: Add support for the Cirrus Logic Lochnagar
clk: lochnagar: Add initial binding documentation
* clk-allwinner:
clk: sunxi-ng: sun5i: Export the MBUS clock
clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk
clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate
clk: sunxi-ng: h6: Preset hdmi-cec clock parent
clk: sunxi: Add Kconfig options
clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset
clk: sunxi-ng: Allow DE clock to set parent rate
* clk-rockchip:
clk: rockchip: undo several noc and special clocks as critical on rk3288
clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type
clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288
clk: rockchip: Limit use of USB PHY clock to USB on rk3288
clk: rockchip: Fix video codec clocks on rk3288
clk: rockchip: Make rkpwm a critical clock on rk3288
clk: rockchip: fix wrong clock definitions for rk3328
* clk-qoriq:
clk: qoriq: increase array size of cmux_to_group
dt-bindings: qoriq-clock: Add ls1028a chip compatible string
clk: qoriq: Add ls1028a clock configuration
clk: qoriq: add more PLL divider clocks support
dt-bindings: qoriq-clock: add more PLL divider clocks support
Now that clk_{readl,writel} is just an alias for {readl,writel}, we can
switch all users of clk_* to use the accessors directly and remove the
helpers.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[sboyd@kernel.org: Also convert renesas file so that this can be
compile independently]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk_gate_ufs_subsys is a system bus clock, turning off it will
introduce lockup issue during system suspend flow. Let's mark
clk_gate_ufs_subsys as critical clock, thus keeps it on during
system suspend and resume.
Fixes: d374e6fd50 ("clk: hisilicon: Add clock driver for hi3660 SoC")
Cc: stable@vger.kernel.org
Cc: Zhong Kaihua <zhongkaihua@huawei.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Suggested-by: Dong Zhang <zhangdong46@hisilicon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This flag doesn't look to be used by any code, just set in various clk
init structures and then never tested again. Remove it from these
drivers as it doesn't provide any benefit.
Cc: Jiancheng Xue <xuejiancheng@hisilicon.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Jianguo Sun <sunjianguo1@huawei.com>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Hisilicon 3670 SoC support
* clk-samsung:
dt-bindings: clock: samsung: Add SPDX license identifiers
clk: samsung: Use clk_hw API for calling clk framework from clk notifiers
clk: samsung: exynos5420: Enable PERIS clocks for suspend
clk: samsung: exynos5420: Define CLK_SECKEY gate clock only or Exynos5420
clk: samsung: exynos5433: Keep sclk_uart clocks enabled in suspend
clk: samsung: Remove obsolete code for Exynos4412 ISP clocks
clk: samsung: exynos5433: Add suspend state for TOP, CPIF & PERIC CMUs
clk: samsung: Use NOIRQ stage for Exynos5433 clocks suspend/resume
clk: samsung: exynos5420: Use generic helper for handling suspend/resume
clk: samsung: exynos4: Use generic helper for handling suspend/resume
clk: samsung: Add support for setting registers state before suspend
clk: samsung: exynos5250: Use generic helper for handling suspend/resume
clk: samsung: s5pv210: Use generic helper for handling suspend/resume
clk: samsung: s3c64xx: Use generic helper for handling suspend/resume
clk: samsung: s3c2443: Use generic helper for handling suspend/resume
clk: samsung: s3c2412: Use generic helper for handling suspend/resume
clk: samsung: s3c2410: Use generic helper for handling suspend/resume
clk: samsung: Remove excessive include
* clk-hisi3670:
clk: hisilicon: Add clock driver for Hi3670 SoC
dt-bindings: clk: hisilicon: Add bindings for Hi3670 clk
* clk-at91-div-0:
clk: at91: Fix division by zero in PLL recalc_rate()
