Commit 91842ed844 ("ata: libata-core: Set capacity to zero for a
security locked drive") introduced setting the device capacity (n_sectors)
to zero in ata_dev_configure() if the drive is security locked.
However, during runtime revalidation, ata_dev_revalidate() compares the
new capacity (now 0) with the old capacity (>0) and detects a mismatch.
Since it does not consider the locked status, it returns -ENODEV.
This revalidation failure can occur when doing a reset of the PHY (e.g.
hard reset) for a controller that has I/Os in flight. The timed out
I/Os trigger the SCSI Error Handling (EH) path, which in turn invokes
libata device revalidation. If the drive is locked at runtime (e.g.
it lost power during reset and relocked), revalidation sees the capacity
transition to zero and fails, eventually disabling the device.
Fix this by allowing the capacity transition to zero in
ata_dev_revalidate() if the drive is reported as security locked by
ata_id_is_locked().
Fixes: 91842ed844 ("ata: libata-core: Set capacity to zero for a security locked drive")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Terrence Adams <tadamsjr@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Skip HPA resize in ata_hpa_resize() if the drive is security locked.
If the drive is locked, the command to read the native max address
fails with -EACCES, which currently causes the sticky quirk
ATA_QUIRK_BROKEN_HPA to be set on the device.
Setting this sticky quirk causes subsequent revalidations (after the
drive is unlocked) to bypass HPA checks, preventing the unlocked drive
from exposing its full native capacity without a reboot or device removal.
Cc: stable@vger.kernel.org
Signed-off-by: Terrence Adams <tadamsjr@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
DSM TRIM currently always emits a single 512-byte page of LBA Range Entries
(ATA_MAX_TRIM_RNUM == 64 ranges), regardless of how many pages the device
can accept in one DATA SET MANAGEMENT command.
The maximum is reported by MAX PAGES PER DSM COMMAND (IDENTIFY DEVICE word
105). Honour it: size the TRIM descriptor as a whole number of 512-byte
pages, bounded by that limit and by the logical sector size (the WRITE SAME
data-out buffer is a single logical block). Build and transfer only as
many pages as the request needs, and set the DSM COUNT field, qc->nbytes
and the maximum WRITE SAME length in the Block Limits VPD page accordingly.
Build the descriptor straight into the WRITE SAME data-out buffer using an
atomic sg_miter mapping, instead of staging it in the shared ata_scsi_rbuf
and copying it out. This removes the global ata_scsi_rbuf_lock and a
memcpy from the TRIM path.
While commit 9379e6b8e0 ("libata: Safely overwrite attached page in WRITE
SAME xlat") replaced direct access to the data-out buffer with an
intermediate step that writes the entries in the ata_scsi_rbuf buffer, this
solution writes to the data-out buffer using sg_miter, which maps each
segment with kmap_atomic (SG_MITER_ATOMIC), so it's highmem- and
multi-segment-safe, and it's usable from the non-sleeping
command-submission path (unlike the page_address() access that
ata_scsi_rbuf originally replaced).
A 512-byte-sector device still uses a single page, so its behaviour is
unchanged.
Add ata_id_dsm_max_pages() to read IDENTIFY DEVICE word 105.
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the
UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM
descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte
ata_scsi_rbuf staging buffer, and the number of bytes copied is compared
against the logical sector size by the caller:
size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
if (size != len) /* len == sdp->sector_size */
goto invalid_param_len;
ata_format_dsm_trim_descr() clamps the copy length to ATA_SCSI_RBUF_SIZE
(2048). On a device whose logical sector size exceeds that (e.g. a 4Kn
device, where sector_size == 4096) the function can never return more than
2048, while the caller expects it to return sector_size. The comparison
therefore always fails, so every TRIM is rejected with "Parameter list
length error" and WARN_ON() splats on each attempt. TRIM / discard is
thus completely broken on such devices.
The descriptor was incorrectly sized from the logical sector size. A DSM
TRIM payload is a list of 512-byte pages, each holding up to
ATA_MAX_TRIM_RNUM (64) LBA Range Entries, and is independent of the logical
sector size. The Block Limits VPD page already advertises a single such
page as the maximum WRITE SAME length (65535 * ATA_MAX_TRIM_RNUM logical
blocks), so the block layer never sends a request that needs more than one
page.
Emit exactly one 512-byte page, independent of the logical sector size,
and transfer only that page (COUNT == 1). For a 512-byte-sector device
this is unchanged; devices with larger logical sectors now work instead of
failing every TRIM.
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Fixes: ef2d7392c4 ("libata: SCT Write Same / DSM Trim")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Add support to ata_scsi_report_supported_opcodes() for the all command
format indicated with a reporting option of 0. The function
ata_scsi_report_all_supported_opcodes() is introduced to implement this
support. This function operates by testing all commands of the
ata_supported_cmds array and testing them using
ata_scsi_cmd_is_supported(), filling rbuf as it loops through all the
commands that libata can emulate or translate.
With this change, sg_opcodes /dev/sdX is able to list all commands
supported by libata and a device. An example below is shown for a SATA
disk also supporting CDL:
# sg_opcodes /dev/sda
ATA WDC WUH722626AL WZ41
Peripheral device type: disk
Opcode Service CDB RWCDLP, Name
(hex) action(h) size CDLP
-----------------------------------------------
00 6 0,0 Test Unit Ready
01 6 0,0 Rezero Unit
03 6 0,0 Request Sense
08 6 0,0 Read(6)
0a 6 0,0 Write(6)
0b 6 0,0 Seek(6)
12 6 0,0 Inquiry
15 6 0,0 Mode select(6)
1a 6 0,0 Mode sense(6)
1b 6 0,0 Start stop unit
1d 6 0,0 Send diagnostic
25 10 0,0 Read capacity(10)
28 10 0,0 Read(10)
2a 10 0,0 Write(10)
2b 10 0,0 Seek(10)
2f 10 0,0 Verify(10)
35 10 0,0 Synchronize cache(10)
55 10 0,0 Mode select(10)
5a 10 0,0 Mode sense(10)
7f 1ff0 32 0,0 ATA pass-through(32)
85 16 0,0 ATA pass-through(16)
88 16 1,1 Read(16)
8a 16 1,2 Write(16)
8f 16 0,0 Verify(16)
91 16 0,0 Synchronize cache(16)
9e 10 16 0,0 Read capacity(16)
a0 12 0,0 Report luns
a1 12 0,0 ATA pass-through(12)
a3 c 12 0,0 Report supported operation codes
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Add support for the reporting options value 2 of the in REPORT SUPPORTED
OPERATION CODES command in ata_scsi_report_supported_opcodes(). With this
reporting option, the specified opcode to check must have a service
action. Use ata_scsi_supported_cmd_has_sa() to check for this and fill the
command reply buffer using the one command format based on the command
support.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
ata_scsi_report_supported_opcodes() is ignoring the service action
specified in the SCSI command CDB, but the one command format must take
this field into consideration. With the reporting options field set to 1,
the REPORT SUPPORTED OPERATION CODES command must be failed if the
specified opcode to check has service actions, while reporting option 3
must match supported opcodes together with the specified service action.
Stop ignoring the service action by passing it to
ata_scsi_cmd_is_supported() and searching for commands in the
array of supported commands (ata_supported_cmds) using both the command
opcode and service action.
Introduce the helper function ata_scsi_supported_cmd_use_sa() to determine
if a particular command has service actions and use this function to fail
a REPORT SUPPORTED OPERATION CODES command if such command is specified
with reporting options 1.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
ata_scsi_report_supported_opcodes() is very limited in functionality as it
lacks support for the all command format and also does not handle
correctly commands that have a service action.
In preparation for adding these missing features, refactor how
ata_scsi_report_supported_opcodes() operates to make modifications and
extensions easier. To do so, introduce the array of supported commands
ata_supported_cmds. This array entries are of type struct ata_scsi_cmd.
This structure stores the operation code, CDB length, and the service
action of a supported SCSI command that libata SAT can translate or
emulate. Since some service actions (e.g. ZI_REPORT_ZONES) can have a
value of 0, the field sa_valid of struct ata_scsi_cmd is used to indicate
if the sa field is valid, or if it should be ignored.
The helper function ata_scsi_get_supported_cmd() is implemented to search
for a particular command by opcode in this array. This function is used in
ata_scsi_cmd_is_supported() together with a struct ata_scsi_cmd_support to
check based on the target device features if the specified command is
supported.
ata_scsi_cmd_is_supported() is used as the main function in
ata_scsi_report_supported_opcodes() to determine if a particular command
is supported and fill the command reply rbuf as needed. In the case of a
command that is not supported, the support field is set to 1 as specified
in SPC, indicating that the command is not supported.
Of note is that the old ata_scsi_report_supported_opcodes() code did not
handle the VARIABLE_LENGTH_CMD/ATA_32 command which is supported and
translated by libata-scsi. The ata_supported_cmds array includes this
command. As commented in the code, WRITE_SAME_16 is left out of the array
of supported command ata_scsi_write_same_xlat() prevents the use of this
command as a passthrough command.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
The helper function ata_dev_is_zac() checks if a device is a ZAC class
device (host managed zoned disk) or if it is a host aware zoned disk, that
is, a regular ATA disk that supports the zoned capabilities. So the name
of this helper function is confusing as it hints at the first case only.
Rename this helper function to ata_dev_is_zoned() to avoid confusions and
better reflect the two cases tested. Use this helper in
ata_scsiop_inq_std(), ata_scsiop_read_cap() and
ata_scsi_report_supported_opcodes() instead of having the same tests open
coded.
While at it, to stay consistent with this renaming, also rename
ata_dev_config_zac() to ata_dev_config_zoned().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
<linux/mod_devicetable.h> is included transitively in nearly every
driver in an x86_64 allmodconfig build of v7.1:
$ find drivers -name \*.o -not -name \*.mod.o | wc -l
21330
$ find drivers -name \*.o.cmd -not -name \*.mod.o.cmd | xargs grep -l mod_devicetable.h | wc -l
17038
The result of this mixture of different and unrelated subsystem details
is that even when touching an obscure device id struct most of the
kernel needs to be recompiled. Given that each driver typically only
needs one or two of these structures, splitting into per subsystem
headers and only including what is really needed reduces the amount of
needed recompilation.
This split is implemented in the first commit and then after some
preparatory work in the following commits, the last two replace
includes of <linux/mod_devicetable.h> by the actually needed more
specific headers. There are still a few instances left, but the ones
with high impact (that is in headers that are used a lot) and the easy
ones (.c files) are handled. These remaining includes will be addressed
during the next merge window.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmpHSvIACgkQj4D7WH0S
/k6Rdgf/QqxMIt7DEAN6KvyCnwVnNnvEWQhac/DtYA3NF1JaynieJIoFcimrRr/j
cntxjz2zlMhLH4CYZ87IunZ7nGZgkMlsnl/OVMm5NY0wq0vVYX6VmpiSvhMAgvjV
QxKHOAyuVqPslwVE8DF2Vh9mgJILviH5t/yIy8DHF85QBrDSjcd/n6csx09uTjIy
+D6NuxQ7ZeOi+O2wZuiDhYpD1kwgO1sXAg56ogN1OSTQoo1kkKqj66b5fgbPVm4/
MX3EBOjKIytX8csfWBJjNSB7aRyWVMkMKmmDO9+7MIq6tPRbc3yYwhu2kZBAw5Pt
mQfy1oyUi+0jwew4yKHeoVLyWAc4bg==
=YhFg
-----END PGP SIGNATURE-----
Merge tag 'device-id-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull mod_devicetable.h header split from Uwe Kleine-König:
"Split <linux/mod_devicetable.h> in per subsystem headers
<linux/mod_devicetable.h> is included transitively in nearly every
driver in an x86_64 allmodconfig build of v7.1:
$ find drivers -name \*.o -not -name \*.mod.o | wc -l
21330
$ find drivers -name \*.o.cmd -not -name \*.mod.o.cmd | xargs grep -l mod_devicetable.h | wc -l
17038
The result of this mixture of different and unrelated subsystem
details is that even when touching an obscure device id struct most of
the kernel needs to be recompiled. Given that each driver typically
only needs one or two of these structures, splitting into per
subsystem headers and only including what is really needed reduces the
amount of needed recompilation.
This split is implemented in the first commit and then after some
preparatory work in the following commits, the last two replace
includes of <linux/mod_devicetable.h> by the actually needed more
specific headers.
There are still a few instances left, but the ones with high impact
(that is in headers that are used a lot) and the easy ones (.c files)
are handled. These remaining includes will be addressed during the
next merge window"
* tag 'device-id-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (headers)
parisc: #include <linux/compiler.h> for unlikely() in <asm/ptrace.h>
media: em28xx: Add include for struct usb_device_id
LoongArch: KVM: Add include defining struct cpu_feature
ALSA: hda/core: Add include defining struct hda_device_id
usb: dwc2: Add include defining struct pci_device_id
platform/x86: int3472: Add include defining struct dmi_system_id
platform/x86: x86-android-tablets: Add include defining struct dmi_system_id
i2c: Let i2c-core.h include <linux/i2c.h>
of: Explicitly include <linux/types.h> and <linux/err.h>
platform/x86: msi-ec: Ensure dmi_system_id is defined
usb: serial: Include <linux/usb.h> in <linux/usb/serial.h>
driver core: platform: Include header for struct platform_device_id
driver: core: Include headers for acpi_device_id and of_device_id for struct device_driver
media: ti: vpe: #include <linux/platform_device.h> explicitly
mod_devicetable.h: Split into per subsystem headers
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
The function ata_scsi_rbuf_fill() is used to copy the response of
emulated SCSI commands from ata_scsi_rbuf to the SCSI command's
scatterlist.
Currently, sg_copy_from_buffer() is called with the size argument
set to ATA_SCSI_RBUF_SIZE (2048 bytes). Since ata_scsi_rbuf is
zeroed out before the simulation actor is invoked, copying the
full buffer size causes the remainder of the SCSI command's
transfer buffer (beyond the actual response length 'len') to be
overwritten with zeroes. This clobbers any pre-existing sentinel
values or data in the caller's buffer tail, even though the
correct residual count is reported via scsi_set_resid().
Fix this by passing the actual response length 'len' as the copy
size to sg_copy_from_buffer(), ensuring that the tail of the
caller's buffer remains untouched. Also, add a defensive check
to ensure that the actor does not return a length exceeding the
static buffer capacity. If this occurs, trigger a WARN_ON(),
fail the command with an aborted command error, and return
immediately without copying any data.
The fix was tested by invoking an SCSI SG_IO INQUIRY on
an ATA disk on vanilla build, and build with the fix. Confirmed
that the input buffer's tail end remains unmodified with the fix.
Fixes: 5251ae224d ("ata: libata-scsi: Return residual for emulated SCSI commands")
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Karuna Ramkumar <rkaruna@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
When dmaengine_slave_config() fails, the DMA channel acquired by
dma_request_chan() is not released before returning the error,
leaking the channel reference.
Fix by adding dma_release_channel() in the error path.
The ata_host_activate() error path already correctly releases the
DMA channel.
Cc: stable@vger.kernel.org
Fixes: 88622d80af ("ata: pata_pxa: dmaengine conversion")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
gemini_sata_bridge_init() prepares and enables both SATA PCLKs, then
disables them again while keeping the clocks prepared for later bridge
start and stop operations. If gemini_setup_ide_pins() fails after that,
gemini_sata_probe() returns directly and skips the existing
out_unprep_clk unwind path.
Route the IDE pinctrl failure through out_unprep_clk so the clocks
prepared by gemini_sata_bridge_init() are unprepared before probe
fails.
Fixes: d872ced29d ("ata: sata_gemini: Introduce explicit IDE pin control")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
ata_dev_config_cpr() takes the number of range descriptors from buf[0]
of the concurrent positioning ranges log (up to 255), which the device
reports independently of the log size in the GPL directory. The count is
then walked at a fixed 32-byte stride in two places with no bound: the
log read here, and the INQUIRY VPD page B9h emitter, which writes one
descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device
reporting a count larger than its own log overflows the read buffer (up
to 7704 bytes past a 512-byte slab), and a count above 62 overflows the
response buffer on the emit side.
Bound the count once, on probe, against both the log the device returned
and the number of descriptors the VPD B9h response buffer can hold
(ATA_DEV_MAX_CPR, derived from the rbuf size). Reject an out-of-range
count with a warning; this keeps the emitter in bounds with no separate
change there.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
Fixes: c745dfc541 ("libata: fix reading concurrent positioning ranges log")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus
after entering Device-Initiated Slumber during idle. With the default
med_power_with_dipm policy the link goes down (SStatus 1 SControl 300)
and does not recover, forcing the filesystem read-only. Forcing
max_performance keeps the link stable across prolonged idle.
Add a NOLPM quirk so link power management is disabled for this drive
specifically, leaving it intact for other devices on the host.
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
- Bump required Clang version to 23 (Marco)
NOTE: This commit was merged from an immutable branch from the tip
tree, and is carried both in the tip tree and the libata tree (with
the approval of tip maintainers) to avoid dependency problems.
- Add Clang context analysis annotations (Bart)
- Use the ahci_nr_ports() helper in libahci (me)
- Fail to probe the ahci driver if the BAR size is smaller than the
required size to support CAP.NP (Number of Ports) (liyouhong)
- Move EXPORT_SYMBOL_GPL(ahci_do_softreset) to be just below the
function definition (Bart)
- Make ata_scsi_scan_host() schedule hotplug work on the
system_dfl_long_wq workqueue so that it can benefit from scheduler
task placement (Marco)
- Make ata_scsi_port_error_handler() schedule hotplug work on the
system_dfl_long_wq workqueue, such that the work always uses the same
workqueue (me)
- Use devm_platform_get_and_ioremap_resource() in pata_arasan_cf driver
(Rosen)
- Fix ata_exec_internal() to only release and acquire the EH mutex if
the calling function is the one holding the EH mutex (Bart)
- Use hweight_long() to count the port_map bits (TanZheng)
- Add COMPILE_TEST support for pata_ep93xx driver (Rosen)
- Drop unused assignments from pata_isapnp driver (Uwe)
- Extend existing JMicron PMP quirk to include JMicron JMS562 (Xu)
- Drop unused assignments of pci_device_id driver data (Uwe)
- Use named initializers for pci_device_id arrays (Uwe)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCajFdDAAKCRDJZDGjmcZN
cg83AP9gjkyIFg4o4ImG1jL46nQ9dHbk+/QQ3ahbn66Wf/UvwgD8CEee7lI3BiXg
pLzk9Hg982BMA5JAM4SZBJcQXCImmQ4=
=arvv
-----END PGP SIGNATURE-----
Merge tag 'ata-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Bump required Clang version to 23 (Marco), and add Clang context
analysis annotations (Bart)
- Use the ahci_nr_ports() helper in libahci (me)
- Fail to probe the ahci driver if the BAR size is smaller than the
required size to support CAP.NP (Number of Ports) (liyouhong)
- Move EXPORT_SYMBOL_GPL(ahci_do_softreset) to be just below the
function definition (Bart)
- Make ata_scsi_scan_host() schedule hotplug work on the
system_dfl_long_wq workqueue so that it can benefit from scheduler
task placement (Marco)
- Make ata_scsi_port_error_handler() schedule hotplug work on the
system_dfl_long_wq workqueue, such that the work always uses the same
workqueue (me)
- Use devm_platform_get_and_ioremap_resource() in pata_arasan_cf driver
(Rosen)
- Fix ata_exec_internal() to only release and acquire the EH mutex if
the calling function is the one holding the EH mutex (Bart)
- Use hweight_long() to count the port_map bits (TanZheng)
- Add COMPILE_TEST support for pata_ep93xx driver (Rosen)
- Drop unused assignments from pata_isapnp driver (Uwe)
- Extend existing JMicron PMP quirk to include JMicron JMS562 (Xu)
- Drop unused assignments of pci_device_id driver data (Uwe)
- Use named initializers for pci_device_id arrays (Uwe)
* tag 'ata-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: Use named initializers for pci_device_id arrays
ata: Drop unused assignments of pci_device_id driver data
ata: libata-pmp: add JMicron JMS562 quirk
ata: pata_isapnp: Drop unused assignments from pnp_device_id array
ata: pata_ep93xx: add COMPILE_TEST support
ata: pata_ep93xx: use unsigned long for data
ata: pata_ep93xx: avoid asm on non ARM
ata: Annotate functions in the issuing path with __must_hold()
ata: libata: Pass ap parameter directly to functions in the issuing path
ata: libata: Document when host->eh_mutex should be held
ata: libata: Add an argument to ata_eh_reset()
ata: ahci: use hweight_long() to count port_map bits
ata: libata: Fix ata_exec_internal()
ata: pata_arasan_cf: simplify ioremap
ata: libata-eh: queue hotplug work on the system_dfl_long_wq workqueue
ata: libata-scsi: Move long delayed work on system_dfl_long_wq
ata: ahci: Move EXPORT_SYMBOL_GPL(ahci_do_softreset)
ata: ahci: fail probe if BAR too small for claimed ports
ata: libahci: use ahci_nr_ports() helper
There are a few added drivers, but mostly the normal maintenance to drivers
for firmware, memory controller and other soc specific hadware:
- The NXP QuickEngine gets modern MSI support, which allows some cleanups to
the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC implementations,
and flexiblity around power managedment for the serial-engine driver
as well as probing the LLCC driver using custom hardware descriptions
inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed, tegra,
broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces,
to update driver probing, object lifetimes and address minor bugs.
-----BEGIN PGP SIGNATURE-----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=27+M
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
pci_device_id that replaces .driver_data by an anonymous union.
Also drop the comma after a few list terminators.
This patch doesn't modify the compiled array, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The drivers explicitly set the .driver_data member of struct
pci_device_id to zero without relying on that value. Drop these unused
assignments.
While touching these arrays, convert the one driver not using PCI_DEVICE
to use that macro and align the array's coding style to what is used
most for these. (i.e. break very long lines, a single space in the list
terminator and no trailing comma.)
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with builds on x86 and
arm64.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
JMicron JMS562, as used in QNAP QDA-A2AR RAID1 adapters, may
keep the exported ATA device not ready while the array is rebuilding.
In this state, libata may repeatedly try to softreset and classify
the fan-out link. On the affected adapter, this can time out, make
PMP/SCR access fail, and eventually disable the fan-out link before
the RAID volume is exported.
A failing boot shows the fan-out link failing SRST, PMP access
timing out, SCR read failing, and the link being disabled:
ata4.00: softreset failed (device not ready)
ata4.15: qc timeout after 3000 msecs (cmd 0xe4)
ata4.00: failed to read SCR 0 (Emask=0x4)
ata4.00: failed to recover link after 3 tries, disabling
After that, the root filesystem on the exported RAID volume cannot
be found.
Add JMS562 to the existing JMicron PMP quirk that disables LPM,
avoids softreset on fan-out links, and assumes an ATA device. This
prevents libata from dropping the exported RAID volume during rebuild
recovery.
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Explicitly assigning .driver_data in drivers that don't use this member
is silly and a bit irritating. Drop it. Also simplify the list
terminator entry to be just empty to match what most other device_id
tables do.
There is no changed semantic, not even a change in the compiled result.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The bulk of these changes converts existing users to the modern variants
of the API that take a PMC instance as argument. This completes the
transition to multi-instance support, which then makes room for cleanups
and restricting the remaining legacy APIs to 32-bit platforms.
Some changes in this set also clean up powergate debugfs and restrict
the power-off handler to be installed only where appropriate. Lastly,
support for Tegra238 is added.
-----BEGIN PGP SIGNATURE-----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=aXSv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmooIVUACgkQmmx57+YA
GNnswQ//bVbhViSLGQUCRXWiJ6wrTxcTVzrvoZe9c6RbTKveJZdzjhkXj989Vtj4
e9DL2iLTBJ4cTyJpL0syerkZB9yYkUxEZUMXptQOb2An34BAVlKyR8CYuClwaY4F
QOK/6vNz2zL081ZSMxZDC9q7dTcHr69vDLa7JZmg1hejZxBleom74jXV2qtxsXRu
7IlIjk/TglpBKIyDc7aB95Oygpy9Om2QqHO40oA5iFu2f52UXbOJdwaiM4ujgAzJ
PD99mMuD1U/hPO/EnofotcpoRUWFGTasQvc9LzcEXuDB/Xi9bhMnyplpLDyB7bf0
6I58KTAoeiK+sRkEtnwwCTO+tMCwgJvS876g8A6AKB0vO/WYSZYzRKL356IHoyVz
XKtooc0Bqrb9v1VRR5FYfsViMcHckV0w2EZJR2qIG63ZgApM+G0/a3RAlxqiUoWF
9Ek53jDbxAP6U3TzFF0Uq+8IqKRgKloaChlmhqhw1nqsjrEfYEYFTKGqtGgtO1gx
IiQtJl2REGhkaaRcJTUc53KHW83MLtgYgQjjh3Dnk7WggJmmBBx4KU3NTOjD9qmL
ewNogtpbWrc8bh/gh+t9qRr1dDVi+xOn59LFElPgH8D3RMZewBVQuM1RzQbt/1wb
ZNJ2lx8rHd0R7+KUHfm8MObk3liWrguzKbJxxJAy89oteyrHxgg=
=IgxF
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-7.2-pmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: pmc: Changes for v7.2-rc1
The bulk of these changes converts existing users to the modern variants
of the API that take a PMC instance as argument. This completes the
transition to multi-instance support, which then makes room for cleanups
and restricting the remaining legacy APIs to 32-bit platforms.
Some changes in this set also clean up powergate debugfs and restrict
the power-off handler to be installed only where appropriate. Lastly,
support for Tegra238 is added.
* tag 'tegra-for-7.2-pmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
usb: xhci: tegra: Explicitly specify PMC instance to use
PCI: tegra: Explicitly specify PMC instance to use
media: vde: Explicitly specify PMC instance to use
drm/tegra: Explicitly specify PMC instance to use
drm/nouveau: tegra: Explicitly specify PMC instance to use
ata: ahci_tegra: Explicitly specify PMC instance to use
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that the build failures have been fixed, we can add COMPILE_TEST so
the buildbots can find potentially more problems.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
An int is being encoded as a void pointer but that breaks on 64-bit
systems as the type needs to match pointer size.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The raw ARM asm delay loop prevents COMPILE_TEST builds on
non-ARM architectures. Guard it with CONFIG_ARM and provide a
cpu_relax() fallback for compilation on other architectures.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Annotate the following functions used in the issuing path:
ata_qc_issue(), ata_sas_queuecmd(), ata_scsi_qc_issue(),
ata_scsi_translate(), __ata_scsi_queuecmd()
These functions are all used in the issuing path, so context analysis will
be able to verify that the ap lock is held, from it is taken in
sas_queuecommand() or ata_scsi_queuecmd() all the way down to
ata_qc_issue().
Commenting out the spin_lock_irqsave() successfully results in a compiler
error on Clang 23.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Co-developed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Context analysis cannot recognize that qc->ap == ap.
Therefore, grow a struct ata_port parameter to the following functions:
ata_qc_issue(), __ata_scsi_queuecmd(), and ata_scsi_translate()
such that we will be able to enable context analysis in a follow-up commit.
No functionality has been changed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Annotate the following functions with __must_hold(&host->eh_mutex):
* All ata_port_operations.error_handler() implementations.
* ata_eh_reset() and ata_eh_recover() because these functions call
ata_eh_release() and ata_eh_acquire().
* All callers of ata_eh_reset() and ata_eh_recover().
Enable Clang's context analysis. This will cause the build to fail if
e.g. a locking bug would be introduced in an error path. This patch
should not affect the generated assembler code.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[cassel: drop note about clang 23 from commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Pass the ATA port pointer as first argument to ata_eh_reset(). No
functionality has been changed. This patch prepares for enabling lock
context analysis. Without this patch, lockdep_assert_held() statements
would have to be added before each ata_eh_reset() call because the
compiler doesn't know that ap->link.p == ap. See also ata_link_init().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Replace the open loop used to calculate the number of set bits
in the port mapping with the `hweight_long()` function, which
simplifies the code without altering its functionality.
Signed-off-by: TanZheng <tanzheng@kylinos.cn>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Some but not all ata_exec_internal() calls happen from the context of
the ATA error handler. Commit c0c362b60e ("libata: implement cross-port
EH exclusion") added ata_eh_release() and ata_eh_acquire() calls in
ata_exec_internal(). Calling these functions is necessary if the caller
holds the eh_mutex but is not allowed if the caller doesn't hold that
mutex. Fix this by only calling ata_eh_release() and ata_eh_acquire() if
the caller holds the eh_mutex. An example of an indirect caller of
ata_exec_internal() that does not hold the eh_mutex is
ata_host_register().
Fixes: c0c362b60e ("libata: implement cross-port EH exclusion")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Use devm_platform_get_and_ioremap_resource() to combine
platform_get_resource, request_mem_region, and ioremap.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
ata_scsi_port_error_handler() uses schedule_delayed_work() to queue
the ap->hotplug_task work.
schedule_delayed_work() always uses the system_percpu_wq per-cpu
workqueue.
ata_scsi_scan_host() queues the ap->hotplug_task work on the unbound
system_dfl_long_wq workqueue.
It seems counter-intuitive to queue the same work on two different
workqueues. Thus, change ata_scsi_port_error_handler() to also queue
the ap->hotplug_task work on the system_dfl_long_wq workqueue, such
that the work is always queued on the same workqueue.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_long_wq. This workqueue should be used when long works are
expected, but it is a per-cpu workqueue.
This is important because queue_delayed_work() queue the work using:
queue_delayed_work_on(WORK_CPU_UNBOUND, ...);
Note that WORK_CPU_UNBOUND = NR_CPUS.
This would end up calling __queue_delayed_work() that does:
if (housekeeping_enabled(HK_TYPE_TIMER)) {
// [....]
} else {
if (likely(cpu == WORK_CPU_UNBOUND))
add_timer_global(timer);
else
add_timer_on(timer, cpu);
}
So when cpu == WORK_CPU_UNBOUND the timer is global and is
not using a specific CPU. Later, when __queue_work() is called:
if (req_cpu == WORK_CPU_UNBOUND) {
if (wq->flags & WQ_UNBOUND)
cpu = wq_select_unbound_cpu(raw_smp_processor_id());
else
cpu = raw_smp_processor_id();
}
Because the wq is not unbound, it takes the CPU where the timer
fired and enqueue the work on that CPU.
The consequence of all of this is that the work can run anywhere,
depending on where the timer fired.
Recently, a new unbound workqueue specific for long running work has
been added:
c116737e97 ("workqueue: Add system_dfl_long_wq for long unbound works")
So change system_long_wq with system_dfl_long_wq so that the work may
benefit from scheduler task placement.
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
From Documentation/process/coding-style.rst:
In source files, separate functions with one blank line. If the function
is exported, the **EXPORT** macro for it should follow immediately after
the closing function brace line.
Hence, move EXPORT_SYMBOL_GPL(ahci_do_softreset) to just below the
definition of the ahci_do_softreset() function.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
When an AHCI controller is disabled in BIOS, its HOST_CAP register may
contain a bogus value, e.g. 0xFFFFFFFF.
Since CAP.NP (Number of Ports) is a zeroes based 5-bit register field,
a value of 0x1f means 32 ports. If CAP.NP claims more ports than can
physically fit within the mapped BAR region, accessing port registers
beyond the BAR boundary causes a kernel panic.
Add validation in ahci_init_one() to check that the BAR size is
sufficient for the number of ports claimed in CAP.NP. The check
calculates the required MMIO size as:
required_size = 0x100 (global registers) + max_ports * 0x80
If required_size exceeds the actual BAR size, the probe fails with
-ENODEV, preventing the panic and providing a clear error message.
Reported-by: liyouhong <liyouhong@kylinos.cn>
Closes: https://lore.kernel.org/all/20260422080322.1006592-1-dayou5941@163.com/
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Suggested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: liyouhong <liyouhong@kylinos.cn>
[cassel: commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Use ahci_nr_ports() helper instead of open coding the same.
No functional change.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Currently the kernel relies on a global variable to reference the PMC
context. Use an explicit lookup for the PMC and pass that to the public
PMC APIs.
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The ACS specification does not allow a non-NCQ command to be issued while
an NCQ command is outstanding.
Commit 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
introduced a feature where a deferred non-NCQ command gets issued from a
workqueue. The design stores a single non-NCQ command per port.
However, when using Port Multipliers (PMPs), specifically PMPs that
support FIS-Based Switching (FBS), non-NCQ and NCQ commands can be mixed
on the same port, just not for the same link, see e.g. ata_std_qc_defer()
which is, and always has operated on a per-link basis.
Therefore, move the deferred_qc from struct ata_port to struct ata_link.
This way, when using a PMP with FBS, we will not needlessly defer commands
to all other links, just because one link issued a non-NCQ command while
having an NCQ command outstanding. Only commands for that specific link
will be deferred. This is in line with how PMPs with FBS worked before
commit 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation").
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Tested-by: Tommy Kelly <linux@tkel.ly>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
When using Port Multipliers (PMPs) with Command-Based Switching (CBS), you
can only issue commands to one link at a time. For PMPs with CBS, there is
already code to handle commands being sent to different links in
sata_pmp_qc_defer_cmd_switch() using ap->excl_link. sata_sil24 also makes
use of ap->excl_link.
A user on the list reported that commit 0ea84089db ("ata: libata-scsi:
avoid Non-NCQ command starvation") broke PMPs with CBS. The commit
introduced code that stores a deferred qc in ap->deferred_qc, to later be
issued via a workqueue. It turns out that this change is incompatible with
the existing ap->excl_link handling used by PMPs with CBS.
Thus, modify sata_pmp_qc_defer_cmd_switch() and sil24_qc_defer() to return
ATA_DEFER_LINK_EXCL, and make sure that the deferred QC handling via
workqueue is not used for this return value.
This way, PMPs with CBS will work once again. Note that the starvation
referenced in commit 0ea84089db ("ata: libata-scsi: avoid Non-NCQ
command starvation") can only happen on libsas ports, and libsas does not
support Port Multipliers, thus there is no harm of reverting back to the
previous way of deferring commands for PMPs with CBS.
Non-libsas ports connected to anything but a PMP with CBS (e.g. a normal
drive or a PMP with FBS) will continue using the deferred workqueue, since
it does result in lower completion latencies for non-NCQ commands, even
though the workqueue is not strictly needed to avoid starvation for
non-libsas ports.
If we want to modify the scope of the workqueue issuing to also handle
PMPs with CBS, then we should ensure that we can save both NCQ and non-NCQ
commands in ap->deferred_qc, while also removing the existing PMP CBS
handling using ap->excl_link, such that we don't duplicate features.
While at it, also add a comment explaining how the ap->excl_link mechanism
works.
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Tested-by: Tommy Kelly <linux@tkel.ly>
Reported-by: Tommy Kelly <linux@tkel.ly>
Closes: https://lore.kernel.org/linux-ide/ce09cc21-a8e9-4845-b205-35411e22fba9@tkel.ly/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The deferred QC feature was meant to handle mixed NCQ and non-NCQ commands,
i.e. for return value ATA_DEFER_LINK.
ATA_DEFER_PORT is returned by PATA drivers, but also certain SATA drivers
like sata_mv and sata_sil24 that uses ap->excl_link to workaround hardware
bugs in these HBAs. Regardless of the reason, using the deferred QC feature
for ATA_DEFER_PORT is always wrong, and will break the ap->excl_link usage
of the SATA drivers that rely on that feature.
Modify ata_scsi_qc_issue() to only use the deferred QC feature when mixing
NCQ and non-NCQ commands, i.e. ATA_DEFER_LINK.
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Tested-by: Tommy Kelly <linux@tkel.ly>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Improve readability of ata_scsi_qc_issue().
No functional changes.
Tested-by: Tommy Kelly <linux@tkel.ly>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Driver core expects devices to be dynamically allocated and will, for
example, complain loudly when no release function has been provided.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
Note that this also fixes a reference leak in the unlikely event that
device_register() ever fails.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
- Misc code cleanups related to tag checking and tag command completion
(Damien)
- Remove Baikal bt1-ahci DT binding since the upstreaming for this SoC is
not going to be finalized (Andy)
- Only call the libata port error handler from the SCSI error handler if
there were command timeouts or if EH was scheduled for the port
(Damien)
- Refactor ata_scsiop_maint_in() to more clearly show that there is only
one service action implemented for the MAINTENANCE IN command (me)
- Clean up the handling of sysfs attributes exposed by libata (Heiner)
- Let libahci_platform use a flexible array member for platform PHYs to
avoid multiple allocations (Rosen)
- Do not retry reset if the device has been removed/hot-unplugged (Igor)
- Add missing newlines to error prints in pata_arasan_cf driver (Haoyu)
- Use the correct SCSI host byte when completing deferred ATA
PASS-THROUGH commands, to avoid the SCSI mid-layer from failing the
commands instead of requeuing (Igor)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCad0KbAAKCRDJZDGjmcZN
coW9AP9NSpDWYW8ptoA+2R+wj2AHwiusSVEooIwAFGyDjquftAD+If03044dsO7Z
AlBlxq88iEjQNVB3JhfeR5Plx83ZXgs=
=zswk
-----END PGP SIGNATURE-----
Merge tag 'ata-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Misc code cleanups related to tag checking and tag command completion
(Damien)
- Remove Baikal bt1-ahci DT binding since the upstreaming for this SoC
is not going to be finalized (Andy)
- Only call the libata port error handler from the SCSI error handler
if there were command timeouts or if EH was scheduled for the port
(Damien)
- Refactor ata_scsiop_maint_in() to more clearly show that there is
only one service action implemented for the MAINTENANCE IN command
(me)
- Clean up the handling of sysfs attributes exposed by libata (Heiner)
- Let libahci_platform use a flexible array member for platform PHYs to
avoid multiple allocations (Rosen)
- Do not retry reset if the device has been removed/hot-unplugged
(Igor)
- Add missing newlines to error prints in pata_arasan_cf driver (Haoyu)
- Use the correct SCSI host byte when completing deferred ATA
PASS-THROUGH commands, to avoid the SCSI mid-layer from failing the
commands instead of requeuing (Igor)
* tag 'ata-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: fix requeue of deferred ATA PASS-THROUGH commands
ata: pata_arasan_cf: fix missing newline in dev_err() messages
ata: libata-transport: remove static variable ata_scsi_transport_template
ata: libata-transport: split struct ata_internal
ata: libata-transport: use static struct ata_transport_internal to simplify match functions
ata: libata-transport: inline ata_attach|release_transport
ata: libata-transport: instantiate struct ata_internal statically
ata: libata-eh: Do not retry reset if the device is gone
ata: libahci_platform: use flex array for platform PHYs
ata: libata-transport: remove redundant dynamic sysfs attributes
ata: libata-scsi: refactor ata_scsiop_maint_in()
ata: libata-eh: avoid unnecessary calls to ata_scsi_port_error_handler()
ata: ahci-dwc: Remove not-going-to-be-supported code for Baikal SoC
ata: libata-scsi: rename and improve ata_qc_done()
ata: libata-scsi: make ata_scsi_simulate() static
ata: libata-scsi: simplify ata_scsi_requeue_deferred_qc()
ata: libata-sata: simplify ata_sas_queuecmd()
ata: libata-core: improve tag checks in ata_qc_issue()
Commit 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
introduced ata_scsi_requeue_deferred_qc() to handle commands deferred
during resets or NCQ failures. This deferral logic completed commands
with DID_SOFT_ERROR to trigger a retry in the SCSI mid-layer.
However, DID_SOFT_ERROR is subject to scsi_cmd_retry_allowed() checks.
ATA PASS-THROUGH commands sent via SG_IO ioctl have scmd->allowed set
to zero. This causes the mid-layer to fail the command immediately
instead of retrying, even though the command was never actually issued
to the hardware.
Switch to DID_REQUEUE to ensure these commands are inserted back into
the request queue regardless of retry limits.
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The JMicron JMB585 (and JMB582) SATA controllers advertise 64-bit DMA
support via the S64A bit in the AHCI CAP register, but their 64-bit DMA
implementation is defective. Under sustained I/O, DMA transfers targeting
addresses above 4GB silently corrupt data -- writes land at incorrect
memory addresses with no errors logged.
The failure pattern is similar to the ASMedia ASM1061
(commit 20730e9b27 ("ahci: add 43-bit DMA address quirk for ASMedia
ASM1061 controllers")), which also falsely advertised full 64-bit DMA
support. However, the JMB585 requires a stricter 32-bit DMA mask rather
than 43-bit, as corruption occurs with any address above 4GB.
On the Minisforum N5 Pro specifically, the combination of the JMB585's
broken 64-bit DMA with the AMD Family 1Ah (Strix Point) IOMMU causes
silent data corruption that is only detectable via checksumming
filesystems (BTRFS/ZFS scrub). The corruption occurs when 32-bit IOVA
space is exhausted and the kernel transparently switches to 64-bit DMA
addresses.
Add device-specific PCI ID entries for the JMB582 (0x0582) and JMB585
(0x0585) before the generic JMicron class match, using a new board type
that combines AHCI_HFLAG_IGN_IRQ_IF_ERR (preserving existing behavior)
with AHCI_HFLAG_32BIT_ONLY to force 32-bit DMA masks.
Signed-off-by: Arthur Husband <artmoty@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Add missing trailing newlines to dev_err() messages in pata_arasan_cf.c.
This keeps the error output as properly terminated log lines.
Acked-by: Viresh Kumar <vireshk@kernel.org>
Signed-off-by: Haoyu Lu <hechushiguitu666@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Simplify the code by making struct ata_scsi_transportt public, instead
of using separate variable ata_scsi_transport_template.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
There's no need for an umbrella struct, so remove it. It's also a
prerequisite for making the embedded struct scsi_transport_template
public.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Both matching functions can make use of static struct
ata_transport_internal. This eliminates the dependency on static
variable ata_scsi_transport_template, and it allows to remove helper
to_ata_internal(). Small drawback is that a forward declaration of
both functions is needed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Both functions are helpers which are used only once. So remove them and
merge their code into libata_transport_init() and libata_transport_exit()
respectively.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Struct ata_internal is only instantiated once, in module init code.
So we can also instantiate it statically, which allows simplifying
the code.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
If a device is hot-unplugged or otherwise disappears during error handling,
ata_eh_reset() may fail with -ENODEV. Currently, the error handler will
continue to retry the reset operation up to max_tries times.
Prevent unnecessary reset retries by exiting the loop early when
ata_do_reset() returns -ENODEV.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Modify struct ahci_host_priv to use a flexible array member for an adapter
port PHYs and use struct_size to combine the allocation of this array
together with the adapter private data structure. __counted_by() annotation
is added for the phys field to support runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Use the static sysfs attributes directly, this allows to significantly
simplify the code. See attribute_container_add_attrs() for why member
grp can be used instead of attrs.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
ata_scsiop_maint_in() is currently quite confusing to read, because it
currently only implements support for the service action REPORT SUPPORTED
OPERATION CODES.
Thus, when this function is checking for "invalid command format", it is
not very clear if it is an invalid command format for the MAINTENANCE IN
command itself, or an invalid command format for the (currently one and
only) service action/subcommand implemented for this command.
Move the service action to a separate function, so it is more clear that
the "invalid command format" check is actually specific for the REPORT
SUPPORTED OPERATION CODES service action.
This also makes it easier and less confusing to add support for additional
service actions in the future.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit 4ab7bb9763 ("ata: libata-scsi: Refactor ata_scsiop_maint_in()")
modified ata_scsiop_maint_in() to directly call
ata_scsi_set_invalid_field() to set the field pointer of the sense data
of a failed MAINTENANCE IN command. However, in the case of an invalid
command format, the sense data field incorrectly indicates byte 1 of
the CDB. Fix this to indicate byte 2 of the command.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 4ab7bb9763 ("ata: libata-scsi: Refactor ata_scsiop_maint_in()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
ADATA SU680 SSDs suffer from NCQ read and write commands timeouts or bus
errors when link power management (LPM) is enabled. Flag these devices
with the ATA_QUIRK_NOLPM quirk to prevent the use of LPM and avoid these
command failures.
Reported-by: Mohammad Khaled Bayan <mhd.khaled.bayan@gmail.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux-hwe-6.17/+bug/2144060
Cc: stable@vger.kernel.org
Tested-by: Mohammad-Khaled Bayan <mhd.khaled.bayan@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
If the ata_qc_for_each_raw() loop finishes without finding a matching SCSI
command for any QC, the variable qc will hold a pointer to the last element
examined, which has the tag i == ATA_MAX_QUEUE - 1. This qc can match the
port deferred QC (ap->deferred_qc).
If that happens, the condition qc == ap->deferred_qc evaluates to true
despite the loop not breaking with a match on the SCSI command for this QC.
In that case, the error handler mistakenly intercepts a command that has
not been issued yet and that has not timed out, and thus erroneously
returning a timeout error.
Fix the problem by checking for i < ATA_MAX_QUEUE in addition to
qc == ap->deferred_qc.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Assisted-by: Gemini:gemini-3.1-pro
Fixes: eddb98ad93 ("ata: libata-eh: correctly handle deferred qc timeouts")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[cassel: modified commit log as suggested by Damien]
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Currently, whenever you boot with a QEMU drive over an AHCI interface,
you get:
[ 1.632121] ata1.00: applying bridge limits
This happens due to the kernel not believing the given drive is SATA,
since word 93 of IDENTIFY (ATA_ID_HW_CONFIG) is non-zero. The result is
a pretty severe limit in max_hw_sectors_kb, which limits our IO sizes.
QEMU has set word 93 erroneously for SATA drives but does not, in any
way, emulate any of these real hardware details. There is no PATA
drive and no SATA cable.
As such, add a BRIDGE_OK quirk for QEMU HARDDISK. Special care is taken
to limit this quirk to "2.5+", to allow for fixed future versions.
This results in the max_hw_sectors being limited solely by the
controller interface's limits. Which, for AHCI controllers, takes it
from 128KB to 32767KB.
Cc: stable@vger.kernel.org
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Syzbot reported a WARN_ON() in ata_scsi_deferred_qc_work(), caused by
ap->ops->qc_defer() returning non-zero before issuing the deferred qc.
ata_scsi_schedule_deferred_qc() is called during each command completion.
This function will check if there is a deferred QC, and if
ap->ops->qc_defer() returns zero, meaning that it is possible to queue the
deferred qc at this time (without being deferred), then it will queue the
work which will issue the deferred qc.
Once the work get to run, which can potentially be a very long time after
the work was scheduled, there is a WARN_ON() if ap->ops->qc_defer() returns
non-zero.
While we hold the ap->lock both when assigning and clearing deferred_qc,
and the work itself holds the ap->lock, the code currently does not cancel
the work after clearing the deferred qc.
This means that the following scenario can happen:
1) One or several NCQ commands are queued.
2) A non-NCQ command is queued, gets stored in ap->deferred_qc.
3) Last NCQ command gets completed, work is queued to issue the deferred
qc.
4) Timeout or error happens, ap->deferred_qc is cleared. The queued work is
currently NOT canceled.
5) Port is reset.
6) One or several NCQ commands are queued.
7) A non-NCQ command is queued, gets stored in ap->deferred_qc.
8) Work is finally run. Yet at this time, there is still NCQ commands in
flight.
The work in 8) really belongs to the non-NCQ command in 2), not to the
non-NCQ command in 7). The reason why the work is executed when it is not
supposed to, is because it was never canceled when ap->deferred_qc was
cleared in 4). Thus, ensure that we always cancel the work after clearing
ap->deferred_qc.
Another potential fix would have been to let ata_scsi_deferred_qc_work() do
nothing if ap->ops->qc_defer() returns non-zero. However, canceling the
work when clearing ap->deferred_qc seems slightly more logical, as we hold
the ap->lock when clearing ap->deferred_qc, so we know that the work cannot
be holding the lock. (The function could be waiting for the lock, but that
is okay since it will do nothing if ap->deferred_qc is not set.)
Reported-by: syzbot+bcaf842a1e8ead8dfb89@syzkaller.appspotmail.com
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Fixes: eddb98ad93 ("ata: libata-eh: correctly handle deferred qc timeouts")
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
According to a user report, the ST1000DM010-2EP102 has problems with LPM,
causing random system freezes. The drive belongs to the same BarraCuda
family as the ST2000DM008-2FR102 which has the same issue.
Cc: stable@vger.kernel.org
Fixes: 7627a0edef ("ata: ahci: Drop low power policy board type")
Reported-by: Filippo Baiamonte <filippo.ba03@bugzilla.kernel.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221163
Signed-off-by: Maximilian Pezzullo <maximilianpezzullo@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
When handling SCSI command timeouts, if we had no actual command
timeouts (either because the command was a deferred qc or the completion
path won the race with ata_scsi_cmd_error_handler()), we do not need to
go through a port error handling, as there was in fact no errors at all.
Modify ata_scsi_cmd_error_handler() to return the number of commands
that timed out and use this return value in ata_scsi_error() to call
ata_scsi_port_error_handler() only if we had command timeouts, or if
the port EH has already been scheduled due to failed commands.
Otherwise, simply call scsi_eh_flush_done_q() to finish the completed
commands without running the full port error handling.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Rename ata_qc_done() to ata_scsi_qc_done() and allow to pass a scsi
command result value to set for the completed command to simplify the
caller sites.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
ata_scsi_simulate() is called only from libata-scsi.c. Move this
function definition as a static function before its call in
__ata_scsi_queuecmd() and remove its declaration from
include/linux/libata.h.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
In ata_scsi_requeue_deferred_qc(), use ata_qc_done() instead of calling
ata_qc_free() and scsi_done() directly.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Change ata_sas_queuecmd() to return early the result of
__ata_scsi_queuecmd() and remove the rc local variable.
This simplifies the code without any functional change.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Make sure to check that the tag of a queued command is valid when
ata_qc_issue() is called, and fail the QC if the tag is not valid, or if
there is an on-going non-NCQ command already on the link.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
cancel_work_sync() is a sleeping function so it cannot be called with
the spin lock of a port being held. Move the call to this function in
ata_port_detach() after EH completes, with the port lock released,
together with other work cancellation calls.
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
A deferred qc may timeout while waiting for the device queue to drain
to be submitted. In such case, since the qc is not active,
ata_scsi_cmd_error_handler() ends up calling scsi_eh_finish_cmd(),
which frees the qc. But as the port deferred_qc field still references
this finished/freed qc, the deferred qc work may eventually attempt to
call ata_qc_issue() against this invalid qc, leading to errors such as
reported by UBSAN (syzbot run):
UBSAN: shift-out-of-bounds in drivers/ata/libata-core.c:5166:24
shift exponent 4210818301 is too large for 64-bit type 'long long unsigned int'
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x279/0x2a0 lib/ubsan.c:494
ata_qc_issue.cold+0x38/0x9f drivers/ata/libata-core.c:5166
ata_scsi_deferred_qc_work+0x154/0x1f0 drivers/ata/libata-scsi.c:1679
process_one_work+0x9d7/0x1920 kernel/workqueue.c:3275
process_scheduled_works kernel/workqueue.c:3358 [inline]
worker_thread+0x5da/0xe40 kernel/workqueue.c:3439
kthread+0x370/0x450 kernel/kthread.c:467
ret_from_fork+0x754/0xd80 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fix this by checking if the qc of a timed out SCSI command is a deferred
one, and in such case, clear the port deferred_qc field and finish the
SCSI command with DID_TIME_OUT.
Reported-by: syzbot+1f77b8ca15336fff21ff@syzkaller.appspotmail.com
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
- Cleanup IRQ masking in the handling of completed report zones
commands (Niklas).
- Improve the handling of Thunderbolt attached devices to speed up
device removal (Henry).
- Several patches to generalize the existing max_sec quirks to
facilitates quirking the maximum command size of buggy drives, many
of which have recently showed up with the recent increase of the
default max_sectors block limit (Niklas).
- Cleanup the ahci-platform and sata dt-bindings schema (Rob,
Manivannan).
- Improve device node scan in the ahci-dwc driver (Krzysztof).
- Remove clang W=1 warnings with the ahci-imx and ahci-xgene drivers
(Krzysztof).
- Fix a long standing potential command starvation situation with
non-NCQ commands issued when NCQ commands are on-going (me).
- Limit max_sectors to 8191 on the INTEL SSDSC2KG480G8 SSD (Niklas).
- Remove Vesa Local Bus (VLB) support in the pata_legacy driver
(Ethan).
- Simple fixes in the pata_cypress (typo) and pata_ftide010 (timing)
drivers (Ethan, Linus W.)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCaY5uKwAKCRDdoc3SxdoY
dvn1AQCyhAHcegeAuQLL9L6pTdtKmObR0AOeeTkqOvGOWdb4agD+OVCeivi7KPBL
zwzaJ5BhvwOS8FTiZzd+KHVpAQ0LtQk=
=HvkS
-----END PGP SIGNATURE-----
Merge tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ATA updates from Damien Le Moal:
- Cleanup IRQ masking in the handling of completed report zones
commands (Niklas)
- Improve the handling of Thunderbolt attached devices to speed up
device removal (Henry)
- Several patches to generalize the existing max_sec quirks to
facilitates quirking the maximum command size of buggy drives, many
of which have recently showed up with the recent increase of the
default max_sectors block limit (Niklas)
- Cleanup the ahci-platform and sata dt-bindings schema (Rob,
Manivannan)
- Improve device node scan in the ahci-dwc driver (Krzysztof)
- Remove clang W=1 warnings with the ahci-imx and ahci-xgene drivers
(Krzysztof)
- Fix a long standing potential command starvation situation with
non-NCQ commands issued when NCQ commands are on-going (me)
- Limit max_sectors to 8191 on the INTEL SSDSC2KG480G8 SSD (Niklas)
- Remove Vesa Local Bus (VLB) support in the pata_legacy driver (Ethan)
- Simple fixes in the pata_cypress (typo) and pata_ftide010 (timing)
drivers (Ethan, Linus W)
* tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_ftide010: Fix some DMA timings
ata: pata_cypress: fix typo in error message
ata: pata_legacy: remove VLB support
ata: libata-core: Quirk INTEL SSDSC2KG480G8 max_sectors
dt-bindings: ata: sata: Document the graph port
ata: libata-scsi: avoid Non-NCQ command starvation
ata: libata-scsi: refactor ata_scsi_translate()
ata: ahci-xgene: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-imx: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-dwc: Simplify with scoped for each OF child loop
dt-bindings: ata: ahci-platform: Drop unnecessary select schema
ata: libata: Allow more quirks
ata: libata: Add libata.force parameter max_sec
ata: libata: Add support to parse equal sign in libata.force
ata: libata: Change libata.force to use the generic ATA_QUIRK_MAX_SEC quirk
ata: libata: Add ata_force_get_fe_for_dev() helper
ata: libata: Add ATA_QUIRK_MAX_SEC and convert all device quirks
ata: libata: avoid long timeouts on hot-unplugged SATA DAS
ata: libata-scsi: Remove superfluous local_irq_save()
Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes. The biggest core change is the massive code
motion in the sd driver to remove forward declarations and the most
significant change is to enumify the queuecommand return.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaY4ljBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIWFlwEAr9nc1ntxH4UNPgFCVjKyAOa5IE+p5o5C
2lwQIufcihEBAORvI9KO6AoEK6v9TmMKZXoyVsDRFe79fQE5NwCjfAA3
=My8f
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
The FTIDE010 has been missing some timing settings since its
inception, since the upstream OpenWrt patch was missing these.
The community has since come up with the appropriate timings.
Fixes: be4e456ed3 ("ata: Add driver for Faraday Technology FTIDE010")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
An error message in the pata_cypress driver has a typo "mome" for
"mode". Fix it.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
This significantly reduces the complexity of the pata_legacy driver.
The VLB bus is very obsolete and last appeared on P5 Pentium-era
hardware. Support for it has been removed from other drivers, and
it is highly unlikely anyone is using it with modern Linux kernels.
Some of these chips were integrated on motherboards, but they
seem to have all been 486-era boards, which are equally obsolete.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Commit 9b8b84879d ("block: Increase BLK_DEF_MAX_SECTORS_CAP") increased
the default max_sectors_kb from 1280 KiB to 4096 KiB.
INTEL SSDSC2KG480G8 with FW rev XCV10120 times out when sending I/Os of
size 4096 KiB.
Enable ATA_QUIRK_MAX_SEC, with value 8191 (sectors) for this device,
since any I/O with more sectors than that lead to I/O timeouts.
With this, the INTEL SSDSC2KG480G8 is usable again.
Link: https://lore.kernel.org/linux-ide/176839089913.2398366.61500945766820256@eldamar.lan/
Fixes: 9b8b84879d ("block: Increase BLK_DEF_MAX_SECTORS_CAP")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a non-NCQ command is issued while NCQ commands are being executed,
ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing
should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command
deferring is correct and as mandated by the ACS specifications since
NCQ and non-NCQ commands cannot be mixed.
However, in the case of a host adapter using multiple submission queues,
when the target device is under a constant load of NCQ commands, there
are no guarantees that requeueing the non-NCQ command will be executed
later and it may be deferred again repeatedly as other submission queues
can constantly issue NCQ commands from different CPUs ahead of the
non-NCQ command. This can lead to very long delays for the execution of
non-NCQ commands, and even complete starvation for these commands in the
worst case scenario.
Since the block layer and the SCSI layer do not distinguish between
queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT
implementation must ensure forward progress for non-NCQ commands in the
presence of NCQ command traffic. This is similar to what SAS HBAs with a
hardware/firmware based SAT implementation do.
Implement such forward progress guarantee by limiting requeueing of
non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is
received and NCQ commands are in-flight, do not force a requeue of the
non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0
to indicate that the command was accepted but hold on to the qc using
the new deferred_qc field of struct ata_port.
This deferred qc will be issued using the work item deferred_qc_work
running the function ata_scsi_deferred_qc_work() once all in-flight
commands complete, which is checked with the port qc_defer() callback
return value indicating that no further delay is necessary. This check
is done using the helper function ata_scsi_schedule_deferred_qc() which
is called from ata_scsi_qc_complete(). This thus excludes this mechanism
from all internal non-NCQ commands issued by ATA EH.
When a port deferred_qc is non NULL, that is, the port has a command
waiting for the device queue to drain, the issuing of all incoming
commands (both NCQ and non-NCQ) is deferred using the regular busy
mechanism. This simplifies the code and also avoids potential denial of
service problems if a user issues too many non-NCQ commands.
Finally, whenever ata EH is scheduled, regardless of the reason, a
deferred qc is always requeued so that it can be retried once EH
completes. This is done by calling the function
ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids
the need for any special processing for the deferred qc in case of NCQ
error, link or device reset, or device timeout.
Reported-by: Xingui Yang <yangxingui@huawei.com>
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Fixes: bdb01301f3 ("scsi: Add host and host template flag 'host_tagset'")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Tested-by: Xingui Yang <yangxingui@huawei.com>
Commit d633b8a702 ("libata: print feature list on device scan")
added a print of the features supported by the device for ATA_DEV_ATA and
ATA_DEV_ZAC devices, but not for ATA_DEV_ATAPI devices.
Fix this by printing the features also for ATAPI devices.
Before changes:
ata1.00: ATAPI: Slimtype DVD A DU8AESH, 6C2M, max UDMA/133
After changes:
ata1.00: ATAPI: Slimtype DVD A DU8AESH, 6C2M, max UDMA/133
ata1.00: Features: Dev-Attention HIPM DIPM
Fixes: d633b8a702 ("libata: print feature list on device scan")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
ata_dev_print_features() is supposed to return early and not print anything
if there are no features supported.
However, commit b1f5af54f1 ("ata: libata-core: Advertize device support
for DIPM and HIPM features") added additional features to
ata_dev_print_features() without updating the early return conditional.
Add the missing features to the early return conditional.
Fixes: b1f5af54f1 ("ata: libata-core: Advertize device support for DIPM and HIPM features")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
ata_dev_print_features() is supposed to return early and not print anything
if there are no features supported.
However, commit fe22e1c2f7 ("libata: support concurrent positioning
ranges log") added another feature to ata_dev_print_features() without
updating the early return conditional.
Add the missing feature to the early return conditional.
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The link_power_management_supported sysfs attribute is currently set as
true even for ata ports that lack a .set_lpm() callback, e.g. dummy ports.
This is a bit silly, because while writing to the
link_power_management_policy sysfs attribute will make ata_scsi_lpm_store()
update ap->target_lpm_policy (thus sysfs will reflect the new value) and
call ata_port_schedule_eh() for the port, it is essentially a no-op.
This is because for a port without a .set_lpm() callback, once EH gets to
run, the ata_eh_link_set_lpm() will simply return, since the port does not
provide a .set_lpm() callback.
Thus, make sure that the link_power_management_supported sysfs attribute
is set to false for ports that lack a .set_lpm() callback. This way the
link_power_management_policy sysfs attribute will no longer be writable,
so we will no longer be misleading users to think that their sysfs write
actually does something.
Fixes: 0060beec0b ("ata: libata-sata: Add link_power_management_supported sysfs attribute")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Commit d360121832 ("ata: libata-core: Introduce ata_dev_config_lpm()")
introduced ata_dev_config_lpm(). However, it only called this function for
ATA_DEV_ATA and ATA_DEV_ZAC devices, not for ATA_DEV_ATAPI devices.
Additionally, commit d99a9142e7 ("ata: libata-core: Move device LPM quirk
settings to ata_dev_config_lpm()") moved the LPM quirk application from
ata_dev_configure() to ata_dev_config_lpm(), causing LPM quirks for ATAPI
devices to no longer be applied.
Call ata_dev_config_lpm() also for ATAPI devices, such that LPM quirks are
applied for ATAPI devices with an entry in __ata_dev_quirks once again.
Fixes: d360121832 ("ata: libata-core: Introduce ata_dev_config_lpm()")
Fixes: d99a9142e7 ("ata: libata-core: Move device LPM quirk settings to ata_dev_config_lpm()")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
An AHCI HBA specifies the number of ports it supports using CAP.NP.
The HBA is free to only make a subset of the number of ports available
using the PI (Ports Implemented) register.
libata currently creates dummy ports for HBA ports that are provided by
the HBA, but which are marked as "unavailable" using the PI register.
Each port will have a per port area of registers in the HBA, regardless
if the port is marked as "unavailable" or not.
ahci_mark_external_port() currently reads this per port area of registers
using readl() to see if the port is marked as external/hotplug-capable.
However, AHCI 1.3.1, section "3.1.4 Offset 0Ch: PI – Ports Implemented"
states: "Software must not read or write to registers within unavailable
ports."
Thus, make sure that we only call ahci_mark_external_port() and
ahci_update_initial_lpm_policy() for ports that are implemented.
From a libata perspective, this should not change anything related to LPM,
as dummy ports do not provide any ap->ops (they do not have a .set_lpm()
callback), so even if EH were to call .set_lpm() on a dummy port, it was
already a no-op.
Fixes: f713193523 ("ata: ahci: move marking of external port earlier")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Factor out of ata_scsi_translate() the code handling queued command
deferral using the port qc_defer callback and issuing the queued
command with ata_qc_issue() into the new function ata_scsi_qc_issue(),
and simplify the goto used in ata_scsi_translate().
While at it, also add a lockdep annotation to check that the port lock
is held when ata_scsi_translate() is called.
No functional changes.
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
"version" is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
ahci_xgene.c:776:13: error: cast to smaller integer type 'enum xgene_ahci_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
"imxpriv->type" is an enum, thus cast of pointer on 64-bit compile test
with clang W=1 causes:
ahci_imx.c:872:18: error: cast to smaller integer type 'enum ahci_imx_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Use scoped for-each loop when iterating over device nodes and switch to
iterating already over available nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
According to a user report, the ST2000DM008-2FR102 has problems with LPM.
Reported-by: Emerson Pinter <e@pinter.dev>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220693
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
We have currently used up 30 out of the 32-bits in the struct ata_device
struct member quirks. Thus, it is only possible to add two more quirks.
Change the struct ata_device struct member quirks from an unsigned int to
an u64.
Doing this core level change now, will make it easier for us now, as we
will not need to also do core level changes once the final two bits are
used as well.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Add a new libata.force parameter called max_sec.
The parameter can take an arbitrary value using the format:
libata.force=max_sec=<number of 512B sectors>
e.g. libata.force=max_sec=8191
or
libata.force=max_sec=2048
This will allow the user to set an arbitrary maximum command size
(dev->max_sectors) using libata.force.
We cannot remove the existing libata.force parameters "max_sec_128" and
"max_sec_1024", as these are a part of the exising user facing API.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Currently, no libata.force parameter supports an arbitrary value.
All allowed values, e.g. udma/16, udma/25, udma/33, udma/44, udma/66,
udma/100, udma/133 have hardcoded entries in the force_tbl table.
Add code to allow a libata.force param with the format
libata.force=param=param_value, where param_value can be an arbitrary
value.
This code will be used in a follow up commit.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Modify the existing libata.force parameters "max_sec_128" and
"max_sec_1024" to use the generic ATA_QUIRK_MAX_SEC quirk rather than
individual quirks.
This also allows us to remove the individual quirks ATA_QUIRK_MAX_SEC_128
and ATA_QUIRK_MAX_SEC_1024.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
