- Avoid writing an uninitialised stack variable to POR_EL0 on
sigreturn if the poe_context record is absent
- Reserve one more page for the early 4K-page kernel mapping to cover
the extra [_text, _stext) split introduced by the non-executable
read-only mapping
- Force the arch_local_irq_*() wrappers to be __always_inline so that
noinstr entry and idle paths cannot call out-of-line, instrumentable
copies
- Fix potential sign extension in the arm64 SCS unwinder's DWARF
advance_loc4 decoding
- Tolerate arm64 ACPI platforms with only WFI and no deeper PSCI idle
states, restoring cpuidle registration on such systems
- Include the UAPI <asm/ptrace.h> header in the arm64 GCS libc test
rather than carrying a duplicate struct user_gcs definition (the
original #ifdef NT_ARM_GCS was wrong to cover the structure
definition as it would be masked out if the toolchain defined it)
-----BEGIN PGP SIGNATURE-----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=a9er
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Avoid writing an uninitialised stack variable to POR_EL0 on sigreturn
if the poe_context record is absent
- Reserve one more page for the early 4K-page kernel mapping to cover
the extra [_text, _stext) split introduced by the non-executable
read-only mapping
- Force the arch_local_irq_*() wrappers to be __always_inline so that
noinstr entry and idle paths cannot call out-of-line, instrumentable
copies
- Fix potential sign extension in the arm64 SCS unwinder's DWARF
advance_loc4 decoding
- Tolerate arm64 ACPI platforms with only WFI and no deeper PSCI idle
states, restoring cpuidle registration on such systems
- Include the UAPI <asm/ptrace.h> header in the arm64 GCS libc test
rather than carrying a duplicate struct user_gcs definition (the
original #ifdef NT_ARM_GCS was wrong to cover the structure
definition as it would be masked out if the toolchain defined it)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: signal: Preserve POR_EL0 if poe_context is missing
arm64: Reserve an extra page for early kernel mapping
kselftest/arm64: Include <asm/ptrace.h> for user_gcs definition
ACPI: arm64: cpuidle: Tolerate platforms with no deep PSCI idle states
arm64/irqflags: __always_inline the arch_local_irq_*() helpers
arm64/scs: Fix potential sign extension issue of advance_loc4
Merge assorted ACPI support fixes for 7.1-rc2:
- Fix EINJV2 memory error injection in APEI (Tony Luck)
- Add missing notifier_block structure forward declaration to
acpi_bus.h (Bartosz Golaszewski)
- Fix related_cpus inconsistency during CPU hotplug in the ACPI CPPC
library (Jinjie Ruan)
- Add a quirk to force native backlight on HP OMEN 16 (8A44) in the
ACPI video bus driver (Shivam Kalra)
* acpi-apei:
ACPI: APEI: EINJ: Fix EINJV2 memory error injection
ACPICA: Provide #defines for EINJV2 error types
* acpi-bus:
ACPI: bus: add missing forward declaration to acpi_bus.h
* acpi-cppc:
ACPI: CPPC: Fix related_cpus inconsistency during CPU hotplug
* acpi-video:
ACPI: video: force native backlight on HP OMEN 16 (8A44)
The HP OMEN 16 Gaming Laptop (board name 8A44) has a mux-less hybrid
GPU configuration with AMD Rembrandt (Radeon 680M) and NVIDIA GA104
(RTX 3070 Ti). The internal eDP panel is wired to the AMD iGPU.
When Nouveau loads without GSP firmware, the ACPI video backlight
device (acpi_video0) gets registered alongside the native AMD
backlight (amdgpu_bl2). In this state, writes to amdgpu_bl2 update
the software brightness value but fail to change the physical panel
brightness.
Force native backlight to prevent acpi_video0 from registering.
Confirmed that booting with acpi_backlight=native resolves the
issue.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Shivam Kalra <shivamkalra98@zohomail.in>
Link: https://patch.msgid.link/20260426-omen-16-backlight-fix-v1-1-62364f268ea6@zohomail.in
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since rtc_tm_to_ktime() may overflow for large RTC time values and
full second granularity is sufficient in timer value computations
in acpi_tad_rtc_set_alarm() and acpi_tad_rtc_read_alarm(), use
rtc_tm_to_time64() instead of that function, which also allows the
computations to be simplified.
Moreover, U32_MAX is a special "timer disabled" value, so make
acpi_tad_rtc_set_alarm() reject it when attempting to program the
alarm timers.
Fixes: 7572dcabe3 ("ACPI: TAD: Add alarm support to the RTC class device interface")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/3414608.aeNJFYEL58@rafael.j.wysocki
The code in acpi_tad_remove() needs to run after the unregistration of
the devres-managed RTC class device so that it doesn't race with the
class callbacks of the latter.
To make that happen, pass it to devm_add_action_or_reset() before
registering the RTC class device.
Fixes: 7572dcabe3 ("ACPI: TAD: Add alarm support to the RTC class device interface")
Fixes: 8a1e7f4b17 ("ACPI: TAD: Add RTC class device interface")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/14001754.uLZWGnKmhe@rafael.j.wysocki
Recent commit 93afe8ba9b ("ACPI: TAD: Use dev_groups in struct
device_driver") switched over the ACPI TAD driver to using device
attribute groups instead of creating and removing the device sysfs
attributes directly, but it might go one step farther and use the
__ATTRIBUTE_GROUPS() macro which would reduce the code size slightly.
Do it now.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Fixed typo in the changelog ]
Link: https://patch.msgid.link/1961102.tdWV9SEqCh@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When concurrently bringing up and down two SMT threads of a physical
core, many warning call traces occur as below:
The issue timeline is as follows:
1. When the system starts,
cpufreq: CPU: 220, policy->related_cpus: 220-221, policy->cpus: 220-221
2. Offline CPU 220 and CPU 221.
3. Online CPU 220
- CPU 221 is now offline, as acpi_get_psd_map() use
for_each_online_cpu(), so the cpu_data->shared_cpu_map,
policy->cpus, and related_cpus has only CPU 220.
cpufreq: CPU: 220, policy->related_cpus: 220, policy->cpus: 220
4. Offline CPU 220
5. Online CPU 221, the below call trace occurs:
- Since CPU 220 and CPU 221 share one policy, and
policy->related_cpus = 220 after step 3, so CPU 221
is not in policy->related_cpus but
per_cpu(cpufreq_cpu_data, cpu221) is not NULL.
After reverting commit 56eb0c0ed3 ("ACPI: CPPC: Fix remaining
for_each_possible_cpu() to use online CPUs"), the issue disappeared.
The _PSD (P-State Dependency) defines the hardware-level dependency of
frequency control across CPU cores. Since this relationship is a physical
attribute of the hardware topology, it remains constant regardless of the
online or offline status of the CPUs.
Using for_each_online_cpu() in acpi_get_psd_map() is problematic. If a
CPU is offline, it will be excluded from the shared_cpu_map.
Consequently, if that CPU is brought online later, the kernel will fail
to recognize it as part of any shared frequency domain.
Switch back to for_each_possible_cpu() to ensure that all cores defined
in the ACPI tables are correctly mapped into their respective performance
domains from the start. This aligns with the logic of policy->related_cpus,
which must encompass all potentially available cores in the domain to
prevent logic gaps during CPU hotplug operations.
To resolve the original issue regarding the "nosmt" or "nosmt=force"
boot parameter, as send_pcc_cmd() function already does if (!desc)
continue, so reverting that loop back to for_each_possible_cpu() is ok,
only need to change the match_cpc_ptr NULL case in acpi_get_psd_map() to
continue as Sean suggested.
How to reproduce, on arm64 machine with SMT support which use acpi cppc
cpufreq driver:
bash test.sh 220 & bash test.sh 221 &
The test.sh is as below:
while true
do
echo 0 > /sys/devices/system/cpu/cpu${1}/online
sleep 0.5
cat /sys/devices/system/cpu/cpu${1}/cpufreq/related_cpus
echo 1 > /sys/devices/system/cpu/cpu${1}/online
cat /sys/devices/system/cpu/cpu${1}/cpufreq/related_cpus
done
CPU: 221 PID: 1119 Comm: cpuhp/221 Kdump: loaded Not tainted 6.6.0debug+ #5
Hardware name: To be filled by O.E.M. S920X20/BC83AMDA01-7270Z, BIOS 20.39 09/04/2024
pstate: a1400009 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : cpufreq_online+0x8ac/0xa90
lr : cpuhp_cpufreq_online+0x18/0x30
sp : ffff80008739bce0
x29: ffff80008739bce0 x28: 0000000000000000 x27: ffff28400ca32200
x26: 0000000000000000 x25: 0000000000000003 x24: ffffd483503ff000
x23: ffffd483504051a0 x22: ffffd48350024a00 x21: 00000000000000dd
x20: 000000000000001d x19: ffff28400ca32000 x18: 0000000000000000
x17: 0000000000000020 x16: ffffd4834e6a3fc8 x15: 0000000000000020
x14: 0000000000000008 x13: 0000000000000001 x12: 00000000ffffffff
x11: 0000000000000040 x10: ffffd48350430728 x9 : ffffd4834f087c78
x8 : 0000000000000001 x7 : ffff2840092bdf00 x6 : ffffd483504264f0
x5 : ffffd48350405000 x4 : ffff283f7f95cc60 x3 : 0000000000000000
x2 : ffff53bc2f94b000 x1 : 00000000000000dd x0 : 0000000000000000
Call trace:
cpufreq_online+0x8ac/0xa90
cpuhp_cpufreq_online+0x18/0x30
cpuhp_invoke_callback+0x128/0x580
cpuhp_thread_fun+0x110/0x1b0
smpboot_thread_fn+0x140/0x190
kthread+0xec/0x100
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
Cc: All applicable <stable@vger.kernel.org>
Fixes: 56eb0c0ed3 ("ACPI: CPPC: Fix remaining for_each_possible_cpu() to use online CPUs")
Co-developed-by: Sean Kelley <skelley@nvidia.com>
Signed-off-by: Sean Kelley <skelley@nvidia.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260417040112.3727756-1-ruanjinjie@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Error types in EINJV2 use different bit positions for each flavor of
injection from legacy EINJ.
Two issues:
1) The address sanity checks in einj_error_inject() were skipped for
EINJV2 injections. Noted by sashiko[1]
2) __einj_error_trigger() failed to drop the entry of the target
physical address from the list of resources that need to be
requested.
Add a helper function that checks if an injection is to memory and use it
to solve each of these issues.
Note that the old test in __einj_error_trigger() checked that param2 was
not zero. This isn't needed because the sanity checks in einj_error_inject()
reject memory injections with param2 == 0.
Fixes: b47610296d ("ACPI: APEI: EINJ: Enable EINJv2 error injections")
Reported-by: sashiko <sashiko@sashiko.dev>
Reported-by: Herman Li <herman.li@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: "Lai, Yi1" <yi1.lai@intel.com>
Link: https://sashiko.dev/#/patchset/20260415163620.12957-1-tony.luck%40intel.com # [1]
Reviewed-by: Jiaqi Yan <jiaqiyan@google.com>
Reviewed-by: Zaid Alali <zaidal@os.amperecomputing.com>
Link: https://patch.msgid.link/20260421150216.11666-3-tony.luck@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit cac173bea5 ("ACPI: processor: idle: Rework the handling of
acpi_processor_ffh_lpi_probe()") moved the acpi_processor_ffh_lpi_probe()
call from acpi_processor_setup_cpuidle_dev(), where its return value was
ignored, to acpi_processor_get_power_info(), where it is now treated as
a hard failure. As a result, platforms where psci_acpi_cpu_init_idle()
returned -ENODEV stopped registering any cpuidle states, forcing CPUs to
busy-poll when idle.
On NVIDIA Grace (aarch64) systems with PSCIv1.1, pr->power.count is 1
(only WFI, no deep PSCI states beyond it), so the previous
"count = pr->power.count - 1; if (count <= 0) return -ENODEV;" check
returned -ENODEV for all 72 CPUs and disabled cpuidle entirely.
The lpi_states count is already validated in acpi_processor_get_lpi_info(),
so the check here is redundant. Simplify the loop to iterate over
lpi_states[1..power.count). When only WFI is present, the loop body
simply does not execute and the function returns 0, which is the correct
outcome: there is nothing to validate for FFH and no error to report.
Suggested-by: Huisong Li <lihuisong@huawei.com>
Cc: stable@vger.kernel.org
Fixes: cac173bea5 ("ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
- Add an acpi_get_cpu_uid() stub helper to address an x86 Xen support
build breakage (Arnd Bergmann)
- Use acpi_dev_put() in object add error paths in the ACPI core to
avoid refcount leaks (Guangshuo Li)
- Adjust the file entry in the recently added NVIDIA GHES HANDLER entry
in MAINTAINERS to the actual existing file (Lukas Bulwahn)
- Add backlight=native quirk for Dell OptiPlex 7770 AIO to the ACPI
video bus driver (Jan Schär)
- Move Lenovo Legion S7 15ACH6 quirk to the right section of the quirk
list in the ACPI video bus driver (Hans de Goede)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmnqcFUSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1f7AH+wa4kqb3Hy9+WfSV9F1ghRcS0bf6rDfo
Ge6gWS/al31O41RvULCBrbqE25tgpyWxhTgErVhNEMuN9BIzismc9iacw1U33GTI
pOM64JMhtNpjXm0uzmBVDTwopYAoWdF4nnLyu6XIhiK1TZNqTekwZW6pIdnndQg1
r61xvTfuYjDxkmmJYt7tBeaUZbfYJmO2WsHMyBwev5tbJaK96t2JULG8BgAjNMn5
XnsOUpN+s3UEHdY/LbuuY+KePTVrgF+VeioagL4sPk2XCn0C8wL/R/4/2HmpBuPz
kuWapXyuMCbEzSBlwtsWsBXUU6VUCv6Hl21WBH9a0MoOuw3elr0cWX8=
=ce+W
-----END PGP SIGNATURE-----
Merge tag 'acpi-7.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"These fix two potential refcount leaks in error code paths in the ACPI
core code, address a recently introduced build breakage related to the
CPU UID handling consolidation, fix up a recently added MAINTAINERS
entry, fix the quirk list in the ACPI video bus driver, and add a new
quirk to it:
- Add an acpi_get_cpu_uid() stub helper to address an x86 Xen support
build breakage (Arnd Bergmann)
- Use acpi_dev_put() in object add error paths in the ACPI core to
avoid refcount leaks (Guangshuo Li)
- Adjust the file entry in the recently added NVIDIA GHES HANDLER
entry in MAINTAINERS to the actual existing file (Lukas Bulwahn)
- Add backlight=native quirk for Dell OptiPlex 7770 AIO to the ACPI
video bus driver (Jan Schär)
- Move Lenovo Legion S7 15ACH6 quirk to the right section of the
quirk list in the ACPI video bus driver (Hans de Goede)"
* tag 'acpi-7.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Move Lenovo Legion S7 15ACH6 quirk to the right section
ACPI: video: Add backlight=native quirk for Dell OptiPlex 7770 AIO
ACPI: add acpi_get_cpu_uid() stub helper
MAINTAINERS: adjust file entry in NVIDIA GHES HANDLER
ACPI: scan: Use acpi_dev_put() in object add error paths
Merge an ACPI core fix, a fix for the new NVIDIA GHES HANDLER entry in
MAINTAINERS, a new quirk for the ACPI video bus driver and a quirk list
fix for that driver for 7.1-rc1:
- Use acpi_dev_put() in object add error paths in the ACPI core to
avoid refcount leaks (Guangshuo Li)
- Adjust the file entry in the recently added NVIDIA GHES HANDLER entry
in MAINTAINERS to the actual existing file (Lukas Bulwahn)
- Add backlight=native quirk for Dell OptiPlex 7770 AIO to the ACPI
video bus driver (Jan Schär)
- Move Lenovo Legion S7 15ACH6 quirk to the right section of the quirk
list in the ACPI video bus driver (Hans de Goede)
* acpi-scan:
ACPI: scan: Use acpi_dev_put() in object add error paths
* acpi-apei:
MAINTAINERS: adjust file entry in NVIDIA GHES HANDLER
* acpi-video:
ACPI: video: Move Lenovo Legion S7 15ACH6 quirk to the right section
ACPI: video: Add backlight=native quirk for Dell OptiPlex 7770 AIO
Misc patches:
tools/testing/cxl: Enable replay of user regions as auto regions
cxl/region: Add a region sysfs interface for region lock status
cxl/core: Check existence of cxl_memdev_state in poison test
cxl: Add endpoint decoder flags clear when PCI reset happens
ACPI: NUMA: Only parse CFMWS at boot when CXL_ACPI is on
MAINTAINERS: Update address for Dan Williams
cxl/hdm: Add support for 32 switch decoders
MAINTAINERS: Update Jonathan Cameron's email address
Ensure endppoint complete initialization before usage:
cxl/pci: Check memdev driver binding status in cxl_reset_done()
cxl/pci: Hold memdev lock in cxl_event_trace_record()
Type2 prepatory patches:
cxl/region: Factor out interleave granularity setup
cxl/region: Factor out interleave ways setup
cxl: Make region type based on endpoint type
cxl/pci: Remove redundant cxl_pci_find_port() call
cxl: Move pci generic code from cxl_pci to core/cxl_pci
cxl: export internal structs for external Type2 drivers
cxl: support Type2 when initializing cxl_dev_state
Patch series that deals with soft reserved memory conflict between CXL and HMEM:
tools/testing/cxl: Test dax_hmem takeover of CXL regions
tools/testing/cxl: Simulate auto-assembly failure
dax/hmem: Parent dax_hmem devices
dax/hmem: Fix singleton confusion between dax_hmem_work and hmem devices
dax/hmem: Reduce visibility of dax_cxl coordination symbols
cxl/region: Constify cxl_region_resource_contains()
cxl/region: Limit visibility of cxl_region_contains_resource()
dax/cxl: Fix HMEM dependencies
cxl/region: Fix use-after-free from auto assembly failure
dax/hmem, cxl: Defer and resolve Soft Reserved ownership
cxl/region: Add helper to check Soft Reserved containment by CXL regions
dax: Track all dax_region allocations under a global resource tree
dax/cxl, hmem: Initialize hmem early and defer dax_cxl binding
dax/hmem: Gate Soft Reserved deferral on DEV_DAX_CXL
dax/hmem: Request cxl_acpi and cxl_pci before walking Soft Reserved ranges
dax/hmem: Factor HMEM registration into __hmem_register_device()
dax/bus: Use dax_region_put() in alloc_dax_region() error path
Refactor CXL core/region code to make region code more manageable by
splitting out DAX and PMEM code from RAM handling code:
cxl/core: use cleanup.h for devm_cxl_add_dax_region
cxl/core/region: move dax region device logic into region_dax.c
cxl/core/region: move pmem region driver logic into region_pmem.c
-----BEGIN PGP SIGNATURE-----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=uJpx
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dave Jiang:
"The significant change of interest is the handling of soft reserved
memory conflict between CXL and HMEM. In essence CXL will be the first
to claim the soft reserved memory ranges that belongs to CXL and
attempt to enumerate them with best effort. If CXL is not able to
enumerate the ranges it will punt them to HMEM.
There are also MAINTAINERS email changes from Dan Williams and
Jonathan Cameron"
* tag 'cxl-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (37 commits)
MAINTAINERS: Update Jonathan Cameron's email address
cxl/hdm: Add support for 32 switch decoders
MAINTAINERS: Update address for Dan Williams
tools/testing/cxl: Enable replay of user regions as auto regions
cxl/region: Add a region sysfs interface for region lock status
tools/testing/cxl: Test dax_hmem takeover of CXL regions
tools/testing/cxl: Simulate auto-assembly failure
dax/hmem: Parent dax_hmem devices
dax/hmem: Fix singleton confusion between dax_hmem_work and hmem devices
dax/hmem: Reduce visibility of dax_cxl coordination symbols
cxl/region: Constify cxl_region_resource_contains()
cxl/region: Limit visibility of cxl_region_contains_resource()
dax/cxl: Fix HMEM dependencies
cxl/region: Fix use-after-free from auto assembly failure
cxl/core: Check existence of cxl_memdev_state in poison test
cxl/core: use cleanup.h for devm_cxl_add_dax_region
cxl/core/region: move dax region device logic into region_dax.c
cxl/core/region: move pmem region driver logic into region_pmem.c
dax/hmem, cxl: Defer and resolve Soft Reserved ownership
cxl/region: Add helper to check Soft Reserved containment by CXL regions
...
The video_detect_dmi_table[] quirk table has different sections for
different types of problems.
The Lenovo Legion S7 15ACH6 quirk deals with a non working nvidia_wmi_ec
backlight, move it to the section with the other models with this problem.
While at it also add a comment with the laptop model name to the quirk.
Fixes: f144bc21be ("ACPI: video: force native for Lenovo 82K8")
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260413093100.24993-1-johannes.goede@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
The Dell OptiPlex 7770 AIO needs the same quirk as the 7760 AIO. The
backlight can be controlled with the native controller, intel_backlight,
but not with dell_uart_backlight.
I dumped the DSDT using acpidump, acpixtract and iasl, and confirmed
that it contains the DELL0501 device. When loading the
dell_uart_backlight driver with `rmmod dell_uart_backlight`, `modprobe
dell_uart_backlight dyndbg`, it reports "Firmware version: GL_Re_V18".
Fixes: cd8e468efb ("ACPI: video: Add Dell UART backlight controller detection")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Jan Schär <jan@jschaer.ch>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260411092606.47925-1-jan@jschaer.ch
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
After acpi_init_device_object(), the lifetime of struct acpi_device is
managed by the driver core through reference counting.
Both acpi_add_power_resource() and acpi_add_single_object() call
acpi_init_device_object() and then invoke acpi_device_add(). If that
fails, their error paths call the release callback directly instead of
dropping the device reference through acpi_dev_put().
This bypasses the normal device lifetime rules and frees the object
without releasing the reference acquired by device_initialize(), which
may lead to a refcount leak.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fix both error paths by using acpi_dev_put() and let the release
callback handle the final cleanup.
Fixes: 781d737c74 ("ACPI: Drop power resources driver")
Fixes: 718fb0de8f ("ACPI: fix NULL bug for HID/UID string")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260413135343.2884481-1-lgs201920130244@gmail.com
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Core features:
- Add support for FEAT_LSUI, allowing futex atomic operations without
toggling Privileged Access Never (PAN)
- Further refactor the arm64 exception handling code towards the
generic entry infrastructure
- Optimise __READ_ONCE() with CONFIG_LTO=y and allow alias analysis
through it
Memory management:
- Refactor the arm64 TLB invalidation API and implementation for better
control over barrier placement and level-hinted invalidation
- Enable batched TLB flushes during memory hot-unplug
- Fix rodata=full block mapping support for realm guests (when
BBML2_NOABORT is available)
Perf and PMU:
- Add support for a whole bunch of system PMUs featured in NVIDIA's
Tegra410 SoC (cspmu extensions for the fabric and PCIe, new drivers
for CPU/C2C memory latency PMUs)
- Clean up iomem resource handling in the Arm CMN driver
- Fix signedness handling of AA64DFR0.{PMUVer,PerfMon}
MPAM (Memory Partitioning And Monitoring):
- Add architecture context-switch and hiding of the feature from KVM
- Add interface to allow MPAM to be exposed to user-space using resctrl
- Add errata workaround for some existing platforms
- Add documentation for using MPAM and what shape of platforms can use
resctrl
Miscellaneous:
- Check DAIF (and PMR, where relevant) at task-switch time
- Skip TFSR_EL1 checks and barriers in synchronous MTE tag check mode
(only relevant to asynchronous or asymmetric tag check modes)
- Remove a duplicate allocation in the kexec code
- Remove redundant save/restore of SCS SP on entry to/from EL0
- Generate the KERNEL_HWCAP_ definitions from the arm64 hwcap
descriptions
- Add kselftest coverage for cmpbr_sigill()
- Update sysreg definitions
-----BEGIN PGP SIGNATURE-----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=CnVn
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest changes are MPAM enablement in drivers/resctrl and new PMU
support under drivers/perf.
On the core side, FEAT_LSUI lets futex atomic operations with EL0
permissions, avoiding PAN toggling.
The rest is mostly TLB invalidation refactoring, further generic entry
work, sysreg updates and a few fixes.
Core features:
- Add support for FEAT_LSUI, allowing futex atomic operations without
toggling Privileged Access Never (PAN)
- Further refactor the arm64 exception handling code towards the
generic entry infrastructure
- Optimise __READ_ONCE() with CONFIG_LTO=y and allow alias analysis
through it
Memory management:
- Refactor the arm64 TLB invalidation API and implementation for
better control over barrier placement and level-hinted invalidation
- Enable batched TLB flushes during memory hot-unplug
- Fix rodata=full block mapping support for realm guests (when
BBML2_NOABORT is available)
Perf and PMU:
- Add support for a whole bunch of system PMUs featured in NVIDIA's
Tegra410 SoC (cspmu extensions for the fabric and PCIe, new drivers
for CPU/C2C memory latency PMUs)
- Clean up iomem resource handling in the Arm CMN driver
- Fix signedness handling of AA64DFR0.{PMUVer,PerfMon}
MPAM (Memory Partitioning And Monitoring):
- Add architecture context-switch and hiding of the feature from KVM
- Add interface to allow MPAM to be exposed to user-space using
resctrl
- Add errata workaround for some existing platforms
- Add documentation for using MPAM and what shape of platforms can
use resctrl
Miscellaneous:
- Check DAIF (and PMR, where relevant) at task-switch time
- Skip TFSR_EL1 checks and barriers in synchronous MTE tag check mode
(only relevant to asynchronous or asymmetric tag check modes)
- Remove a duplicate allocation in the kexec code
- Remove redundant save/restore of SCS SP on entry to/from EL0
- Generate the KERNEL_HWCAP_ definitions from the arm64 hwcap
descriptions
- Add kselftest coverage for cmpbr_sigill()
- Update sysreg definitions"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (109 commits)
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
ACPI: AGDI: fix missing newline in error message
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
...
Mutexes:
- Add killable flavor to guard definitions (Davidlohr Bueso)
- Remove the list_head from struct mutex (Matthew Wilcox)
- Rename mutex_init_lockep() (Davidlohr Bueso)
rwsems:
- Remove the list_head from struct rw_semaphore and
replace it with a single pointer (Matthew Wilcox)
- Fix logic error in rwsem_del_waiter() (Andrei Vagin)
Semaphores:
- Remove the list_head from struct semaphore (Matthew Wilcox)
Jump labels:
- Use ATOMIC_INIT() for initialization of .enabled (Thomas Weißschuh)
- Remove workaround for old compilers in initializations
(Thomas Weißschuh)
Lock context analysis changes and improvements:
- Add context analysis for rwsems (Peter Zijlstra)
- Fix rwlock and spinlock lock context annotations (Bart Van Assche)
- Fix rwlock support in <linux/spinlock_up.h> (Bart Van Assche)
- Add lock context annotations in the spinlock implementation
(Bart Van Assche)
- signal: Fix the lock_task_sighand() annotation (Bart Van Assche)
- ww-mutex: Fix the ww_acquire_ctx function annotations
(Bart Van Assche)
- Add lock context support in do_raw_{read,write}_trylock()
(Bart Van Assche)
- arm64, compiler-context-analysis: Permit alias analysis through
__READ_ONCE() with CONFIG_LTO=y (Marco Elver)
- Add __cond_releases() (Peter Zijlstra)
- Add context analysis for mutexes (Peter Zijlstra)
- Add context analysis for rtmutexes (Peter Zijlstra)
- Convert futexes to compiler context analysis (Peter Zijlstra)
Rust integration updates:
- Add atomic fetch_sub() implementation (Andreas Hindborg)
- Refactor various rust_helper_ methods for expansion (Boqun Feng)
- Add Atomic<*{mut,const} T> support (Boqun Feng)
- Add atomic operation helpers over raw pointers (Boqun Feng)
- Add performance-optimal Flag type for atomic booleans, to avoid
slow byte-sized RMWs on architectures that don't support them.
(FUJITA Tomonori)
- Misc cleanups and fixes (Andreas Hindborg, Boqun Feng,
FUJITA Tomonori)
LTO support updates:
- arm64: Optimize __READ_ONCE() with CONFIG_LTO=y (Marco Elver)
- compiler: Simplify generic RELOC_HIDE() (Marco Elver)
Miscellaneous fixes and cleanups by Peter Zijlstra, Randy Dunlap,
Thomas Weißschuh, Davidlohr Bueso and Mikhail Gavrilov.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aw95
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Mutexes:
- Add killable flavor to guard definitions (Davidlohr Bueso)
- Remove the list_head from struct mutex (Matthew Wilcox)
- Rename mutex_init_lockep() (Davidlohr Bueso)
rwsems:
- Remove the list_head from struct rw_semaphore and
replace it with a single pointer (Matthew Wilcox)
- Fix logic error in rwsem_del_waiter() (Andrei Vagin)
Semaphores:
- Remove the list_head from struct semaphore (Matthew Wilcox)
Jump labels:
- Use ATOMIC_INIT() for initialization of .enabled (Thomas Weißschuh)
- Remove workaround for old compilers in initializations
(Thomas Weißschuh)
Lock context analysis changes and improvements:
- Add context analysis for rwsems (Peter Zijlstra)
- Fix rwlock and spinlock lock context annotations (Bart Van Assche)
- Fix rwlock support in <linux/spinlock_up.h> (Bart Van Assche)
- Add lock context annotations in the spinlock implementation
(Bart Van Assche)
- signal: Fix the lock_task_sighand() annotation (Bart Van Assche)
- ww-mutex: Fix the ww_acquire_ctx function annotations
(Bart Van Assche)
- Add lock context support in do_raw_{read,write}_trylock()
(Bart Van Assche)
- arm64, compiler-context-analysis: Permit alias analysis through
__READ_ONCE() with CONFIG_LTO=y (Marco Elver)
- Add __cond_releases() (Peter Zijlstra)
- Add context analysis for mutexes (Peter Zijlstra)
- Add context analysis for rtmutexes (Peter Zijlstra)
- Convert futexes to compiler context analysis (Peter Zijlstra)
Rust integration updates:
- Add atomic fetch_sub() implementation (Andreas Hindborg)
- Refactor various rust_helper_ methods for expansion (Boqun Feng)
- Add Atomic<*{mut,const} T> support (Boqun Feng)
- Add atomic operation helpers over raw pointers (Boqun Feng)
- Add performance-optimal Flag type for atomic booleans, to avoid
slow byte-sized RMWs on architectures that don't support them.
(FUJITA Tomonori)
- Misc cleanups and fixes (Andreas Hindborg, Boqun Feng, FUJITA
Tomonori)
LTO support updates:
- arm64: Optimize __READ_ONCE() with CONFIG_LTO=y (Marco Elver)
- compiler: Simplify generic RELOC_HIDE() (Marco Elver)
Miscellaneous fixes and cleanups by Peter Zijlstra, Randy Dunlap,
Thomas Weißschuh, Davidlohr Bueso and Mikhail Gavrilov"
* tag 'locking-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
compiler: Simplify generic RELOC_HIDE()
locking: Add lock context annotations in the spinlock implementation
locking: Add lock context support in do_raw_{read,write}_trylock()
locking: Fix rwlock support in <linux/spinlock_up.h>
lockdep: Raise default stack trace limits when KASAN is enabled
cleanup: Optimize guards
jump_label: remove workaround for old compilers in initializations
jump_label: use ATOMIC_INIT() for initialization of .enabled
futex: Convert to compiler context analysis
locking/rwsem: Fix logic error in rwsem_del_waiter()
locking/rwsem: Add context analysis
locking/rtmutex: Add context analysis
locking/mutex: Add context analysis
compiler-context-analysys: Add __cond_releases()
locking/mutex: Remove the list_head from struct mutex
locking/semaphore: Remove the list_head from struct semaphore
locking/rwsem: Remove the list_head from struct rw_semaphore
rust: atomic: Update a safety comment in impl of `fetch_add()`
rust: sync: atomic: Update documentation for `fetch_add()`
rust: sync: atomic: Add fetch_sub()
...
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic EPP,
Raw EPP, and new unit tests for them to amd-pstate (Gautham Shenoy,
Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate which
leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add a
boost_freq_req QoS request to save the boost constraint instead of
overwriting the last scaling_max_freq constraint (Pierre Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is written
to its status sysfs attribute while the driver is already off (Fabio
De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping core
code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq as
a preparation to upcoming EMC controller support (Svyatoslav Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options to
the cpupower-frequency-info man page, and add the perf-bias option to
the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmnY9TISHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1G9gH/j5mEqfPpiwX6fQ/ZwOGdNOOPVA5w9j4
KPHSMwMD5lZkoaZfasp2vt27KY5SOoVVvRZ2DKkFJ3Jai4I3cUPZYypga2nre1ag
tgzX4vOjcw2r40Eda6ezWl1h4mca/xJJBX7xH2+hn1JY+Y1in37g50CqMIjKh96z
Uugkk6UZytL1XcF55PMhIUgDf6pDtRT5UOW9xOKOkUt8FVWTJ7ei3HaWyV5kDmVq
b5eQ42+OH7y6sWNnoKczFd8fStvh6J/avoJurBEvcOQhMcjaIaB48G19+KjDg73E
NjrVcgG20P2rltBvV2d0J1TKskZHkaP7XjIeWfkwjGZhee3FL7ssS/g=
=fRCO
-----END PGP SIGNATURE-----
Merge tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, cpufreq is the most active development area, mostly
because of the new feature additions and documentation updates in the
amd-pstate driver, but there are also changes in the cpufreq core
related to boost support and other assorted updates elsewhere.
Next up are power capping changes due to the major cleanup of the
Intel RAPL driver.
On the cpuidle front, a new C-states table for Intel Panther Lake is
added to the intel_idle driver, the stopped tick handling in the menu
and teo governors is updated, and there are a couple of cleanups.
Apart from the above, support for Tegra114 is added to devfreq and
there are assorted cleanups of that code, there are also two updates
of the operating performance points (OPP) library, two minor updates
related to hibernation, and cpupower utility man pages updates and
cleanups.
Specifics:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic
EPP, Raw EPP, and new unit tests for them to amd-pstate (Gautham
Shenoy, Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate
which leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add
a boost_freq_req QoS request to save the boost constraint instead
of overwriting the last scaling_max_freq constraint (Pierre
Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury
Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is
written to its status sysfs attribute while the driver is already
off (Fabio De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto
Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping
core code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq
as a preparation to upcoming EMC controller support (Svyatoslav
Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options
to the cpupower-frequency-info man page, and add the perf-bias
option to the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)"
* tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
cpupower: remove extern declarations in cmd functions
cpuidle: Simplify cpuidle_register_device() with guard()
PM / devfreq: tegra30-devfreq: add support for Tegra114
PM / devfreq: use _visible attribute to replace create/remove_sysfs_files()
PM / devfreq: Remove unneeded casting for HZ_PER_KHZ
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
...
Merge cpufreq updates for 7.1-rc1:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic EPP,
Raw EPP, and new unit tests for them to amd-pstate (Gautham Shenoy,
Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate which
leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add a
boost_freq_req QoS request to save the boost constraint instead of
overwriting the last scaling_max_freq constraint (Pierre Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is written
to its status sysfs attribute while the driver is already off (Fabio
De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
* pm-cpufreq: (38 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
amd-pstate-ut: Add module parameter to select testcases
amd-pstate: Introduce a tracepoint trace_amd_pstate_cppc_req2()
amd-pstate: Add sysfs support for floor_freq and floor_count
amd-pstate: Add support for CPPC_REQ2 and FLOOR_PERF
x86/cpufeatures: Add AMD CPPC Performance Priority feature.
...
Merge ACPI APEI updates for 7.1-rc1:
- Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
Feng)
* acpi-apei:
ACPI: APEI: GHES: Add NVIDIA vendor CPER record handler
PCI: hisi: Use devm_ghes_register_vendor_record_notifier()
ACPI: APEI: GHES: Add devm_ghes_register_vendor_record_notifier()
Merge ACPI core driver core driver updates and assorted driver updates
related to ACPI support for 7.1-rc1:
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
* acpi-driver:
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: AC: Define ACPI_AC_CLASS in one place
ACPI: driver: Do not set acpi_device_class() unnecessarily
ACPI: driver: Avoid using pnp.device_class for netlink handling
ACPI: event: Redefine acpi_notifier_call_chain()
ACPI: driver: Do not set acpi_device_name() unnecessarily
ACPI: video: Consolidate pnp.bus_id workarounds handling
ACPI: video: Rework checking for duplicate video bus devices
driver core: auxiliary bus: Introduce dev_is_auxiliary()
ACPI: PAD: Rearrange notify handler installation and removal
ACPI: AC: Get rid of unnecessary declarations
Merge ACPI Time and Alarm Device (TAD) driver updates for 7.1-rc1:
- Clean up the ACPI TAD driver in various ways and add an RTC class
device interface, including both the RTC setting/reading and alarm
timer support, to it (Rafael Wysocki)
* acpi-tad:
ACPI: TAD: Add alarm support to the RTC class device interface
ACPI: TAD: Split acpi_tad_rtc_read_time()
ACPI: TAD: Relocate two functions
ACPI: TAD: Split three functions to untangle runtime PM handling
ACPI: TAD: Use DC wakeup only if AC wakeup is supported
ACPI: TAD: Use dev_groups in struct device_driver
ACPI: TAD: Update the driver description comment
ACPI: TAD: Add RTC class device interface
ACPI: TAD: Clear unused RT data in acpi_tad_set_real_time()
ACPI: TAD: Rearrange RT data validation checking
ACPI: TAD: Use __free() for cleanup in time_store()
ACPI: TAD: Support RTC without wakeup
ACPI: TAD: Create one attribute group
Merge updates related to the CMOS RTC driver and x86/ACPI CMOS RTC
support for 7.1-rc1:
- Add ACPI support to the platform device interface in the CMOS RTC
driver, make the ACPI core device enumeration code create a platform
device for the CMOS RTC, and drop CMOS RTC PNP device support (Rafael
Wysocki)
- Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
driver and clean up the CMOS RTC ACPI address space handler (Rafael
Wysocki)
- Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
and allow that driver to work without a dedicated IRQ if the ACPI
alarm is used (Rafael Wysocki)
* acpi-cmos-rtc:
rtc: cmos: Do not require IRQ if ACPI alarm is used
rtc: cmos: Enable ACPI alarm if advertised in ACPI FADT
ACPI: TAD/x86: cmos_rtc: Consolidate address space handler setup
rtc: cmos: Drop PNP device support
x86: rtc: Drop PNP device check
ACPI: PNP: Drop CMOS RTC PNP device support
ACPI: x86/rtc-cmos: Use platform device for driver binding
ACPI: x86: cmos_rtc: Create a CMOS RTC platform device
ACPI: x86: cmos_rtc: Improve coordination with ACPI TAD driver
ACPI: x86: cmos_rtc: Clean up address space handler driver
Merge ACPI processor driver updates and ACPI CPPC library updates for
7.1-rc1:
- Address multiple assorted issues and clean up the code in the ACPI
processor idle driver (Huisong Li)
- Replace strlcat() in the ACPI processor idle drive with a better
alternative (Andy Shevchenko)
- Rearrange and clean up acpi_processor_errata_piix4() (Rafael Wysocki)
- Move reference performance to capabilities and fix an uninitialized
variable in the ACPI CPPC library (Pengjie Zhang)
- Add support for the Performance Limited Register to the ACPI CPPC
library (Sumit Gupta)
- Add cppc_get_perf() API to read performance controls, extend
cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
library warn on missing mandatory DESIRED_PERF register (Sumit Gupta)
- Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in target
callbacks to allow it to control performance bounds via standard
scaling_min_freq and scaling_max_freq sysfs attributes and add sysfs
documentation for the Performance Limited Register to it (Sumit Gupta)
* acpi-processor:
ACPI: processor: idle: Reset cpuidle on C-state list changes
cpuidle: Extract and export no-lock variants of cpuidle_unregister_device()
ACPI: processor: idle: Fix NULL pointer dereference in hotplug path
ACPI: processor: idle: Reset power_setup_done flag on initialization failure
ACPI: processor: Rearrange and clean up acpi_processor_errata_piix4()
ACPI: processor: idle: Replace strlcat() with better alternative
ACPI: processor: idle: Remove redundant static variable and rename cstate check function
ACPI: processor: idle: Move max_cstate update out of the loop
ACPI: processor: idle: Remove redundant cstate check in acpi_processor_power_init
ACPI: processor: idle: Add missing bounds check in flatten_lpi_states()
* acpi-cppc:
ACPI: CPPC: Check cpc_read() return values consistently
ACPI: CPPC: Fix uninitialized ref variable in cppc_get_perf_caps()
ACPI: CPPC: Move reference performance to capabilities
cpufreq: CPPC: Add sysfs documentation for perf_limited
ACPI: CPPC: add APIs and sysfs interface for perf_limited
cpufreq: cppc: Update MIN_PERF/MAX_PERF in target callbacks
cpufreq: CPPC: Update cached perf_ctrls on sysfs write
ACPI: CPPC: Extend cppc_set_epp_perf() for FFH/SystemMemory
ACPI: CPPC: Warn on missing mandatory DESIRED_PERF register
ACPI: CPPC: Add cppc_get_perf() API to read performance controls
Merge ACPICA updates, an ACPI OS service layer (OSL) update and
assorted updates related to parsing ACPI tables for 7.1-rc1:
- Update maintainers information regarding ACPICA (Rafael Wysocki)
- Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy() (Kees
Cook)
- Trigger an ordered system power off after encountering a fatal error
operator in AML (Armin Wolf)
- Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)
- Remove the temporary stop-gap acpi_pptt_cache_v1_full structure from
the ACPI PPTT parser (Ben Horgan)
- Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
DeSimone)
* acpica:
ACPICA: Update maintainers information
ACPICA: Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy()
* acpi-osl:
ACPI: OSL: Poweroff when encountering a fatal ACPI error
* acpi-tables:
ACPI: tables: Enable FPDT on LoongArch
Documentation: ABI: add FBPT and S3PT entries to sysfs-firmware-acpi
ACPI: FPDT: expose FBPT and S3PT subtables via sysfs
ACPI: PPTT: Remove duplicate structure, acpi_pptt_cache_v1_full
Add the missing trailing newline to the dev_err() message
printed when SDEI event registration fails.
This keeps the error output as a properly terminated log line.
Fixes: a2a591fb76 ("ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device")
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Haoyu Lu <hechushiguitu666@gmail.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When a power notification event occurs, existing ACPI idle states may
become obsolete. The current implementation only performs a partial
update, leaving critical cpuidle parameters, like target_residency_ns
and exit_latency_ns, stale. Furthermore, per-CPU cpuidle_device data,
including last_residency_ns, states_usage, and the disable flag, are not
properly synchronized. Using these stale values leads to incorrect power
management decisions.
To ensure all parameters are correctly synchronized, modify the
notification handling logic:
1. Unregister all cpuidle_device instances to ensure a clean slate.
2. Unregister and re-register the ACPI idle driver. This forces the
framework to re-evaluate global state parameters and ensures the
driver state matches the new hardware power profile.
3. Re-initialize power information and re-register cpuidle_device for
all possible CPUs to restore functional idle management.
This complete reset ensures that the cpuidle framework and the underlying
ACPI states are perfectly synchronized after a power state change.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
[ rjw: Subject rewrite ]
Link: https://patch.msgid.link/20260407081141.2493581-3-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update acpi/pptt.c to use acpi_get_cpu_uid() and remove unused
get_acpi_id_for_cpu() from arm64/loongarch/riscv, completing PPTT's
migration to the unified ACPI CPU UID interface
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260401081640.26875-8-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As a step towards unifying the interface for retrieving ACPI CPU UID
across architectures, introduce a new function acpi_get_cpu_uid() for
riscv. While at it, add input validation to make the code more robust.
And also update acpi_numa.c and rhct.c to use the new interface instead
of the legacy get_acpi_id_for_cpu().
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260401081640.26875-4-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for decoding NVIDIA-specific CPER sections delivered via
the APEI GHES vendor record notifier chain. NVIDIA hardware generates
vendor-specific CPER sections containing error signatures and diagnostic
register dumps. This implementation registers a notifier_block with the
GHES vendor record notifier and decodes these sections, printing error
details via dev_info().
The driver binds to ACPI device NVDA2012, present on NVIDIA server
platforms. The NVIDIA CPER section contains a fixed header with error
metadata (signature, error type, severity, socket) followed by
variable-length register address-value pairs for hardware diagnostics.
This work is based on libcper [1].
Example output:
nvidia-ghes NVDA2012:00: NVIDIA CPER section, error_data_length: 544
nvidia-ghes NVDA2012:00: signature: CMET-INFO
nvidia-ghes NVDA2012:00: error_type: 0
nvidia-ghes NVDA2012:00: error_instance: 0
nvidia-ghes NVDA2012:00: severity: 3
nvidia-ghes NVDA2012:00: socket: 0
nvidia-ghes NVDA2012:00: number_regs: 32
nvidia-ghes NVDA2012:00: instance_base: 0x0000000000000000
nvidia-ghes NVDA2012:00: register[0]: address=0x8000000100000000 value=0x0000000100000000
https://github.com/openbmc/libcper/commit/683e055061ce [1]
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260330094203.38022-4-kaihengf@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a device-managed wrapper around ghes_register_vendor_record_notifier()
so drivers can avoid manual cleanup on device removal or probe failure.
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://patch.msgid.link/20260330094203.38022-2-kaihengf@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
FPDT provides system- and application-readable performance statistics,
useful for profiling and analyzing boot-time performance. FPDT table
support is now available as a pending patch at the EDK II upstream [1]
and has been tested on real hardware such as Loongson XA61200_V1.1 and
XB612B0_V1.2 with patched firmware.
We have also cross checked systemd-analyze(1) against a stop watch and
the `dp' command in EFI Shell to see that the timing information are
correct.
Now that the functionality of FPDT is verified on LoongArch hardware,
list LOONGARCH as a possible dependency, allowing it to be enabled.
Link: https://github.com/tianocore/edk2/pull/12378 [1]
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
[ rjw: Subject tweak ]
Link: https://patch.msgid.link/20260401135311.1737958-2-xry111@xry111.site
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules, similar
to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
-----BEGIN PGP SIGNATURE-----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=d0PH
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules,
similar to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
* tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
ACPI: RIMT: Add dependency between iommu and devices
selftests: riscv: Add braces around EXPECT_EQ()
riscv: use _BITUL macro rather than BIT() in ptrace uapi and kselftests
riscv: Reset pmm when PR_TAGGED_ADDR_ENABLE is not set
riscv: make runtime const not usable by modules
riscv: patch: Avoid early phys_to_page()
riscv: kgdb: fix several debug register assignment bugs
EPROBE_DEFER ensures IOMMU devices are probed before the devices that
depend on them. During shutdown, however, the IOMMU may be removed
first, leading to issues. To avoid this, a device link is added
which enforces the correct removal order.
Fixes: 8f77295525 ("ACPI: RISC-V: Add support for RIMT")
Signed-off-by: Sunil V L <sunilvl@oss.qualcomm.com>
Link: https://patch.msgid.link/20260303061605.722949-1-sunilvl@oss.qualcomm.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
A cpuidle_device might fail to register during boot, but the system can
continue to run. In such cases, acpi_processor_hotplug() can trigger
a NULL pointer dereference when accessing the per-cpu acpi_cpuidle_device.
So add NULL pointer check for the per-cpu acpi_cpuidle_device in
acpi_processor_hotplug.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/20260403090253.998322-1-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The 'power_setup_done' flag is a key indicator used across the ACPI
processor driver to determine if cpuidle are properly configured and
available for a given CPU.
Currently, this flag is set during the early stages of initialization.
However, if the subsequent registration of the cpuidle driver in
acpi_processor_register_idle_driver() or the per-CPU device registration
in acpi_processor_power_init() fails, this flag remains set. This may
lead to some issues where other functions in ACPI idle driver use these
flags.
Fix this by explicitly resetting this flag to 0 in these error paths.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/20260403085343.866440-1-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add alarm support, based on Section 9.17 of ACPI 6.6 [1], to the RTC
class device interface of the driver.
The ACPI time and alarm device (TAD) can support two separate alarm
timers, one for waking up the system when it is on AC power, and one
for waking it up when it is on DC power. In principle, each of them
can be set to a different value representing the number of seconds
till the given alarm timer expires.
However, the RTC class device can only set one alarm, so it will set
both the alarm timers of the ACPI TAD (if the DC one is supported) to
the same value. That is somewhat cumbersome because there is no way in
the ACPI TAD firmware interface to set both timers in one go, so they
need to be set sequentially, but that's how it goes.
On the alarm read side, the driver assumes that both timers have been
set to the same value, so it is sufficient to access one of them (the
AC one specifically).
Link: https://uefi.org/specs/ACPI/6.6/09_ACPI_Defined_Devices_and_Device_Specific_Objects.html#time-and-alarm-device [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/2076980.usQuhbGJ8B@rafael.j.wysocki
Move the code converting a struct acpi_tad_rt into a struct rtc_time
from acpi_tad_rtc_read_time() into a new function, acpi_tad_rt_to_tm(),
to facilitate adding alarm support to the driver's RTC class device
interface going forward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/9619488.CDJkKcVGEf@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move two functions introduced previously, __acpi_tad_wake_set() and
__acpi_tad_wake_read(), to the part of the code preceding the sysfs
interface implementation, since subsequently they will be used by
the RTC device interface too.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/3960639.kQq0lBPeGt@rafael.j.wysocki
Move the core functionality of acpi_tad_get_real_time(),
acpi_tad_wake_set(), and acpi_tad_wake_read() into separate functions
called __acpi_tad_get_real_time(), __acpi_tad_wake_set(), and
__acpi_tad_wake_read(), respectively, which can be called from
code blocks following a single runtime resume of the device.
This will facilitate adding alarm support to the RTC class device
interface of the driver going forward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/23076728.EfDdHjke4D@rafael.j.wysocki
In acpi_processor_errata_piix4() it is not necessary to use three
struct pci_dev pointers. One is sufficient, so use it everywhere and
drop the other two.
Additionally, define the auxiliary local variables value1 and value2
in the code block in which they are used.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2846888.mvXUDI8C0e@rafael.j.wysocki
Instead of creating and removing the device sysfs attributes directly
during probe and remove of the driver, respectively, use dev_groups in
struct device_driver to point to the attribute definitions and let the
core take care of creating and removing them.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2836803.mvXUDI8C0e@rafael.j.wysocki
Update the preamble comment describing the driver to match the code
after previous changes along with the copyright information.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/23034847.EfDdHjke4D@rafael.j.wysocki
Add an RTC class device interface allowing to read and set the real time
value to the ACPI TAD driver.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/2352027.iZASKD2KPV@rafael.j.wysocki
Move the clearing of the fields in struct acpi_tad_rt that are not used
on the real time setting side to acpi_tad_set_real_time().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8660506.T7Z3S40VBb@rafael.j.wysocki
Move RT data validation checks from acpi_tad_set_real_time() to
a separate function called acpi_tad_rt_is_invalid() and use it
also in acpi_tad_get_real_time() to validate data coming from
the platform firmware.
Also make acpi_tad_set_real_time() return -EINVAL when the RT data
passed to it is invalid (instead of -ERANGE which is somewhat
confusing) and introduce ACPI_TAD_TZ_UNSPEC to represent the
"unspecified timezone" value.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3409319.aeNJFYEL58@rafael.j.wysocki
Use __free() for the automatic freeing of memory pointed to by local
variable str in time_store() which allows the code to become somewhat
easier to follow.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13971300.uLZWGnKmhe@rafael.j.wysocki
The ACPI TAD can provide a functional RTC without wakeup capabilities,
so stop failing probe if AC wakeup is not supported.
Also, if _PRW is missing, do not fail probe, but clear the wakeup bits
in capabilities.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1959268.tdWV9SEqCh@rafael.j.wysocki
