Preempt commands are only supported when submitted as chained commands.
To ensure preempt support works consistently, always submit commands in
chained command format.
Set force_cmdlist to true so that single commands are filled using the
chained command layout, enabling correct handling of preempt commands.
Fixes: 3a0ff7b98a ("accel/amdxdna: Support preemption requests")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260206060251.4050512-1-lizhi.hou@amd.com
Large command buffers may be used, and they do not always need to be
mapped or accessed by the driver. Performing a size check at command BO
creation time unnecessarily rejects valid use cases.
Remove the buffer size check from command BO creation, and defer vmap
and size validation to the paths where the driver actually needs to map
and access the command buffer.
Fixes: ac49797c18 ("accel/amdxdna: Add GEM buffer object management")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260206060237.4050492-1-lizhi.hou@amd.com
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The "((cmd[0] & 0xff0000) << 16)" shift is zero. This was intended
to be (((u64)cmd[0] & 0xff0000) << 16). Move the cast to the correct
location.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aQGmY64tWcwOGFP4@stanley.mountain
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Here is the big set of char/misc/iio and other smaller driver subsystem
changes for 7.0-rc1. Lots of little things in here, including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues except for a merge conflict with your tree due to the mhi driver
changes in the drivers/net/wireless/ath/ath12k/mhi.c file. To fix that
up, just delete the "auto_queue" structure fields being set, see this
message for the full change needed:
https://lore.kernel.org/r/aXD6X23btw8s-RZP@sirena.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaZRxOg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykIrACgs9S+A/GG9X0Kvc+ND/J1XYZpj3QAoKl0yXGj
SV1SR/giEBc7iKV6Dn6O
=jbok
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
Currently, amdxdna_pm_resume_get() is called during job creation, and
amdxdna_pm_suspend_put() is called when the hardware notifies job
completion. If a job is canceled before it is run, no hardware
completion notification is generated, resulting in an unbalanced
runtime PM resume/suspend pair.
Fix this by moving amdxdna_pm_resume_get() to the job run path, ensuring
runtime PM is only resumed for jobs that are actually executed.
Fixes: 063db45183 ("accel/amdxdna: Enhance runtime power management")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260204171118.3165607-1-lizhi.hou@amd.com
The suspend routine sets the DPM level to 0, which unintentionally
overwrites the previously saved DPM level. As a result, the device always
resumes with DPM level 0 instead of restoring the original value.
Fix this by ensuring the suspend path does not overwrite the saved DPM
level, allowing the correct DPM level to be restored during resume.
Fixes: f4d7b8a6bc ("accel/amdxdna: Enhance power management settings")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260204171048.3165580-1-lizhi.hou@amd.com
The driver currently returns an incorrect error code when a chain command
fails. In this case, ERT_CMD_STATE_ERROR is expected to be reported for
failed chain commands.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260203184037.2751889-1-lizhi.hou@amd.com
One newly supported command does not require hardware context configuration
to be performed upfront. As a result, checking hardware context status
causes this command to fail incorrectly.
Remove hardware context status handling entirely. For other commands,
if userspace submits a request without configuring the hardware context
first, the firmware will report an error or time out as appropriate.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260202212450.2681273-1-lizhi.hou@amd.com
The amdxdna_ubuf_map() function allocates memory for sg and
internal sg table structures, but it fails to free them if subsequent
operations (sg_alloc_table_from_pages or dma_map_sgtable) fail.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Signed-off-by: Zishun Yi <zishun.yi.dev@gmail.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Min Ma <mamin506@gmail.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260129171022.68578-1-zishun.yi.dev@gmail.com
Running jobs on a hardware context while it is in the process of
releasing resources can lead to use-after-free and crashes.
Fix this by stopping job scheduling before calling
aie2_release_resource() and restarting it after the release completes.
Additionally, aie2_sched_job_run() now checks whether the hardware
context is still active.
Fixes: 4fd6ca90fc ("accel/amdxdna: Refactor hardware context destroy routine")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260130003255.2083255-1-lizhi.hou@amd.com
Some tests trigger a crash in iommu_sva_unbind_device() due to
accessing iommu_mm after the associated mm structure has been
freed.
Fix this by taking an explicit reference to the mm structure
after successfully binding the device, and releasing it only
after the device is unbound. This ensures the mm remains valid
for the entire SVA bind/unbind lifetime.
Fixes: be462c97b7 ("accel/amdxdna: Add hardware context")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260128002356.1858122-1-lizhi.hou@amd.com
--------
- Add support for loading dual ELF image format firmware to Qcom Trust
Management Engine Lit (TME-L) supported devices like QCC2072, which require
separate ELF header for SBL and WLAN firmware segments in a single firmware.
- Remove the MHI auto_queue feature support. This feature was added to offload
the queuing of buffers from the client drivers to the MHI stack, but it caused
a lot of race over the time. So remove this feature from the QRTR client
driver and also from the MHI stack/controller drivers.
- Move the .probe() and .remove() callbacks from driver level to bus level.
MHI Endpoint
------------
- Move the .probe() and .remove() callbacks from driver level to bus level.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmlvHJAACgkQVZ8R5v6R
zvUpogf+Leqm2ma1cORmVV0YgSQkC/DNpNw2wD8oYKRp0hlLdiQTVyJ1l0LZhK1v
ud/0dDQ25HFlnICltm/eyzDlRp/kJz2OVh4becoDmnUqgqnfR4G1WP3DHhPhvODo
5wFiKU463RW1Ba0GsJxhPjSNwbXQeMhyBFOIr2XuWNI9wLCT6c5BRXbM8X7fVTcY
6pNONiEb8YMpclJAIoZwgMLlvHut+RmpKuVdYzOUfzL71os6AmRaDbKFVaBjTqDK
aXUrh5WZZyVndKcxIPTHzrRiZSbqG8laQp8ES2Lfk5ogX5MUEVJVZ14m2Tx9inyH
YYaOnYAyeW0/ZP33/p1odfqrJ6RX4w==
=8oyK
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v6.20' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
--------
- Add support for loading dual ELF image format firmware to Qcom Trust
Management Engine Lit (TME-L) supported devices like QCC2072, which require
separate ELF header for SBL and WLAN firmware segments in a single firmware.
- Remove the MHI auto_queue feature support. This feature was added to offload
the queuing of buffers from the client drivers to the MHI stack, but it caused
a lot of race over the time. So remove this feature from the QRTR client
driver and also from the MHI stack/controller drivers.
- Move the .probe() and .remove() callbacks from driver level to bus level.
MHI Endpoint
------------
- Move the .probe() and .remove() callbacks from driver level to bus level.
* tag 'mhi-for-v6.20' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: ep: Use bus callbacks for .probe() and .remove()
bus: mhi: host: Use bus callbacks for .probe() and .remove()
bus: mhi: host: Drop the auto_queue support
net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels
mhi: host: Add support for loading dual ELF image format
Create notifier_wq with WQ_MEM_RECLAIM flag to fix the possible warning.
workqueue: WQ_MEM_RECLAIM amdxdna_js:drm_sched_free_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM notifier_wq:0x0
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260113173624.256053-1-lizhi.hou@amd.com
There already is a function to return the offset of the core for a given
struct device, so let's reuse that function instead of reimplementing
the same logic.
There's one change in behavior when a struct device is passed which
doesn't match any core's. Before, we would continue through
rocket_remove() but now we exit early, to match what other callers of
find_core_for_dev() (rocket_device_runtime_resume/suspend()) are doing.
This however should never happen. Aside from that, no intended change in
behavior.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20251215-rocket-reuse-find-core-v1-1-be86a1d2734c@cherry.de
When rocket_core_init() fails (as could be the case with EPROBE_DEFER),
we need to properly unwind by decrementing the counter we just
incremented and if this is the first core we failed to probe, remove the
rocket DRM device with rocket_device_fini() as well. This matches the
logic in rocket_remove(). Failing to properly unwind results in
out-of-bounds accesses.
Fixes: 0810d5ad88 ("accel/rocket: Add job submission IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20251215-rocket-error-path-v1-2-eec3bf29dc3b@cherry.de
When rocket_job_init() is called, iommu_group_get() has already been
called, therefore we should call iommu_group_put() and make the
iommu_group pointer NULL. This aligns with what's done in
rocket_core_fini().
If pm_runtime_resume_and_get() somehow fails, not only should
rocket_job_fini() be called but we should also unwind everything done
before that, that is, disable PM, put the iommu_group, NULLify it and
then call rocket_job_fini(). This is exactly what's done in
rocket_core_fini() so let's call that function instead of duplicating
the code.
Fixes: 0810d5ad88 ("accel/rocket: Add job submission IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20251215-rocket-error-path-v1-1-eec3bf29dc3b@cherry.de
The latest firmware increases the major version number. Update
aie2_check_protocol() to accept and support the new firmware version.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251219014356.2234241-2-lizhi.hou@amd.com
The latest firmware requires the message DMA buffer to
- have a minimum size of 8K
- use a power-of-two size
- be aligned to the buffer size
- not cross 64M boundary
Update the buffer allocation logic to meet these requirements and support
the latest firmware.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251219014356.2234241-1-lizhi.hou@amd.com
Starting from NPU6, the driver can pass boot parameters address through
the AON retention register and toggle between cold/warm boot types using
the boot_type parameter, while setting the cold boot entry point in both
cases.
Refactor the existing cold/warm boot handling to be consistent with the
new NPU6 boot flow requirements and still maintain compatibility with
older boot flows.
This will allow firmware to remove support for legacy warm boot starting
from NPU6.
Fixes: 550f4dd2ce ("accel/ivpu: Add support for Nova Lake's NPU")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://patch.msgid.link/20251230142116.540026-1-maciej.falkowski@linux.intel.com
MHI stack offers the 'auto_queue' feature, which allows the MHI stack to
auto queue the buffers for the RX path (DL channel). Though this feature
simplifies the client driver design, it introduces race between the client
drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback'
for the DL channel may get called before the client driver is fully probed.
This means, by the time the dl_callback gets called, the client driver's
structures might not be initialized, leading to NULL ptr dereference.
Currently, the drivers have to workaround this issue by initializing the
internal structures before calling mhi_prepare_for_transfer_autoqueue().
But even so, there is a chance that the client driver's internal code path
may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is
called, leading to similar NULL ptr dereference. This issue has been
reported on the Qcom X1E80100 CRD machines affecting boot.
So to properly fix all these races, drop the MHI 'auto_queue' feature
altogether and let the client driver (QRTR) manage the RX buffers manually.
In the QRTR driver, queue the RX buffers based on the ring length during
probe and recycle the buffers in 'dl_callback' once they are consumed. This
also warrants removing the setting of 'auto_queue' flag from controller
drivers.
Currently, this 'auto_queue' feature is only enabled for IPCR DL channel.
So only the QRTR client driver requires the modification.
Fixes: 227fee5fc9 ("bus: mhi: core: Add an API for auto queueing buffers for DL channel")
Fixes: 68a838b84e ("net: qrtr: start MHI channel after endpoit creation")
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/linux-arm-msm/ZyTtVdkCCES0lkl4@hovoldconsulting.com
Suggested-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Acked-by: Jeff Johnson <jjohnson@kernel.org> # drivers/net/wireless/ath/...
Acked-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251218-qrtr-fix-v2-1-c7499bfcfbe0@oss.qualcomm.com
Newer firmware supports hardware context priority. Set the priority based
on application input.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251217171719.2139025-1-lizhi.hou@amd.com
Newer firmware versions prefer temporal sharing only mode. In this mode,
the driver no longer needs to manage AIE array column allocation. Instead,
a new field, num_unused_col, is added to the hardware context creation
request to specify how many columns will not be used by this hardware
context.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251217191150.2145937-1-lizhi.hou@amd.com
NPU2 hardware was never publicly released and is now obsolete.
Remove all remaining NPU2 support from the driver.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251217190818.2145781-1-lizhi.hou@amd.com
amdxdna_flush() was introduced to ensure that the device does not access
a process address space after it has been freed. However, this is no
longer necessary because the driver now increments the mm reference count
when a command is submitted and decrements it only after the command has
completed. This guarantees that the process address space remains valid
for the entire duration of command execution. Remove amdxdna_flush to
simplify the teardown path.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251216031311.2033399-1-lizhi.hou@amd.com
Validate scatter-gather table size matches buffer object size before
mapping. Break mapping early if the table exceeds buffer size to
prevent overwriting existing mappings. Also validate the table is
not smaller than buffer size to avoid unmapped regions that trigger
MMU translation faults.
Log error and fail mapping operation on size mismatch to prevent
data corruption from mismatched host memory locations and NPU
addresses. Unmap any partially mapped buffer on failure.
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251215070933.520377-1-karol.wachowski@linux.intel.com
aie_destroy_context() is invoked during error handling in
aie2_create_context(). However, aie_destroy_context() assumes that the
context's mailbox channel pointer is non-NULL. If mailbox channel
creation fails, the pointer remains NULL and calling aie_destroy_context()
can lead to a NULL pointer dereference.
In aie2_create_context(), replace aie_destroy_context() with a function
which request firmware to remove the context created previously.
Fixes: be462c97b7 ("accel/amdxdna: Add hardware context")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251212183244.1826318-1-lizhi.hou@amd.com
The firmware sends a response and interrupts the driver before advancing
the mailbox send ring head pointer. As a result, the driver may observe
the response and attempt to send a new request before the firmware has
updated the head pointer. In this window, the send ring still appears
full, causing the driver to incorrectly fail the send operation.
This race can be triggered more easily in a multithreaded environment,
leading to unexpected and spurious "send ring full" failures.
To address this, poll the send ring head pointer for up to 100us before
returning a full-ring condition. This allows the firmware time to update
the head pointer.
Fixes: b87f920b93 ("accel/amdxdna: Support hardware mailbox")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251211045125.1724604-1-lizhi.hou@amd.com
For one command type, cu_idx is assigned before calling memset() on the
command structure. This results in cu_idx being overwritten, causing the
firmware to receive an incomplete or invalid command and leading to
unexpected command failures.
Fix this by moving the memset() call before initializing cu_idx so that
all fields are populated in the correct order.
Fixes: 71829d7f2f ("accel/amdxdna: Use MSG_OP_CHAIN_EXEC_NPU when supported")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251209211639.1636888-1-lizhi.hou@amd.com
When autosuspend is triggered, driver rpm_on flag is set to indicate that
a suspend/resume is already in progress. However, when a userspace
application submits a command during this narrow window,
amdxdna_pm_resume_get() may incorrectly skip the resume operation because
the rpm_on flag is still set. This results in commands being submitted
while the device has not actually resumed, causing unexpected behavior.
The set_dpm() is called by suspend/resume, it relied on rpm_on flag to
avoid calling into rpm suspend/resume recursivly. So to fix this, remove
the use of the rpm_on flag entirely. Instead, introduce aie2_pm_set_dpm()
which explicitly resumes the device before invoking set_dpm(). With this
change, set_dpm() is called directly inside the suspend or resume execution
path. Otherwise, aie2_pm_set_dpm() is called.
Fixes: 063db45183 ("accel/amdxdna: Enhance runtime power management")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251208165356.1549237-1-lizhi.hou@amd.com
In mailbox_get_msg(), mailbox_reg_read_non_zero() is called to poll for a
non-zero tail pointer. This assumed that a zero value indicates an error.
However, certain corner cases legitimately produce a zero tail pointer.
To handle these cases, remove mailbox_reg_read_non_zero(). The zero tail
pointer will be treated as a valid rewind event.
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251204181603.793824-1-lizhi.hou@amd.com
After issuing a firmware suspend request, the driver must ensure that the
suspend operation has completed before proceeding. Add polling of the
MPNPU_PWAITMODE register to confirm that the firmware has fully entered
the suspended state. This prevents race conditions where subsequent
operations assume the firmware is idle before it has actually completed
its suspend sequence.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251202165427.507414-1-lizhi.hou@amd.com
Hardware context destroy function holds dev_lock while waiting for all jobs
to complete. The timeout job also needs to acquire dev_lock, this leads to
a deadlock.
Fix the issue by temporarily releasing dev_lock before waiting for all
jobs to finish, and reacquiring it afterward.
Fixes: 4fd6ca90fc ("accel/amdxdna: Refactor hardware context destroy routine")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251107181050.1293125-1-lizhi.hou@amd.com
The mailbox interrupt register is not always cleared when a mailbox channel
is created. This can leave stale interrupt states from previous operations.
Fix this by explicitly clearing the interrupt register in the mailbox
channel creation function.
Fixes: b87f920b93 ("accel/amdxdna: Support hardware mailbox")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251107181115.1293158-1-lizhi.hou@amd.com
Change #if to #ifdef CONFIG_PROC_FS to fix warning reported by test robot:
drivers/accel/ivpu/ivpu_drv.c:458:5: warning: "CONFIG_PROC_FS" is not defined, evaluates to 0 [-Wundef]
Fixes: 63cc028484 ("accel/ivpu: Add fdinfo support for memory statistics")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Andrzej.Kacprowski@linux.intel.com
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251112071911.1136934-1-karol.wachowski@linux.intel.com
Do not count buffer objects that have no backing pages, including imported
buffers where pages are set by VM faults triggered by userspace or pinned
by other drivers. Instead, return information about actual memory used by
the NPU.
Counting imported buffers results in incorrect calculations when
the same pages are counted multiple times, giving overly high
results.
Fixes: 7bfc9fa995 ("accel/ivpu: Expose NPU memory utilization info in sysfs")
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251106101052.1050348-3-karol.wachowski@linux.intel.com
Implement DRM fdinfo interface to expose memory usage statistics
for NPU device file descriptors. Exclude unpinned and imported
buffers from resident memory calculations to provide accurate
memory usage reporting.
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251106101052.1050348-2-karol.wachowski@linux.intel.com
Rename irq_polling_work to qaic_irq_polling_work to reduce ambiguity
and avoid potential naming conflicts in the future.
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031192511.3179130-1-zachary.mckevitt@oss.qualcomm.com
After subsystem of the device has crashed it sends a message with
command DEBUG_TRANSFER_INFO to kernel(host). Send ACK for that message
and then prepare to collect the ramdump of the subsystem
Steps of crashdump collection is as follows,
1) Device sends DEBUG_TRANSFER_INFO message indicating that device wants
to send crashdump.
2) Send an acknowledgment to that message either ACK or NACK.
a) NACK will inform the device that host will not download the
crashdump
b) ACK will inform the device that host will download the crashdump
3) Along with the DEBUG_TRANSFER_INFO we receive a table base address and
its length, use that to download that table from device.
a) This table is meta data of the crashdump and not the actual
crashdump.
4) After we respond as ACK for message received on step 1) we start
downloading the table. Use series of MEMORY_READ/MEMORY_READ_RSP SSR
commands to download the entire table.
5) Each entry in the table represents a segment of crashdump. Once the
table downloading is complete, iterate through each entry of table
and download each crashdump segment(same as table itself). Table entry
contains the memory base address and length along with other info.
6) After the entire crashdump is downloaded send DEBUG_TRANSFER_DONE
which marks that host is terminating the crashdump transfer. This
message can be send in both success or error case.
7) After receiving DEBUG_TRANSFER_DONE_RSP hand over the crashdump to
dev_coredumpv() and free all the necessary memory.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <pkanojiy@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-4-zachary.mckevitt@oss.qualcomm.com
Subsystem restart (SSR) for a qaic device means that a NSP has crashed,
and will be restarted. However the restart process will lose any state
associated with activation, so the user will need to do some recovery.
While SSR has the provision to collect a crash dump, this patch does not
implement support for it.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Co-developed-by: Troy Hanson <quic_thanson@quicinc.com>
Signed-off-by: Troy Hanson <quic_thanson@quicinc.com>
Co-developed-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: Fix minor checkpatch whitespace issues]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-3-zachary.mckevitt@oss.qualcomm.com
Expose sysfs files for each DBC representing the current state of that DBC.
For example, sysfs for DBC ID 0 and accel minor number 0 looks like this,
/sys/class/accel/accel0/dbc0_state
Following are the states and their corresponding values,
DBC_STATE_IDLE (0)
DBC_STATE_ASSIGNED (1)
DBC_STATE_BEFORE_SHUTDOWN (2)
DBC_STATE_AFTER_SHUTDOWN (3)
DBC_STATE_BEFORE_POWER_UP (4)
DBC_STATE_AFTER_POWER_UP (5)
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-2-zachary.mckevitt@oss.qualcomm.com
Failing to set power off indicates an unrecoverable hardware or firmware
error. Update the driver to treat such a failure as a fatal condition
and stop further operations that depend on successful power state
transition.
This prevents undefined behavior when the hardware remains in an
unexpected state after a failed power-off attempt.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251106180521.1095218-1-lizhi.hou@amd.com
Currently, dma_fence_put(job->fence) is called in job notification
callback. However, if a job is canceled, the notification callback is never
invoked, leading to a memory leak. Move dma_fence_put(job->fence)
to the job cleanup function to ensure the fence is always released.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251105194140.1004314-1-lizhi.hou@amd.com
Add initial support for suspend and hibernation PM callbacks to QAIC.
The device can be suspended any time in which the data path is not
busy as queued I/O operations are lost on suspension and cannot be
resumed after suspend.
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029181808.1216466-1-zachary.mckevitt@oss.qualcomm.com
The driver checks the firmware version during initialization.If preemption
is supported, the driver configures preemption accordingly and handles
userspace preemption requests. Otherwise, the driver returns an error for
userspace preemption requests.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104185340.897560-1-lizhi.hou@amd.com
Add IOCTL debug bit for logging user provided parameter validation
errors.
Refactor several warning and error messages to better reflect fault
reason. User generated faults should not flood kernel messages with
warnings or errors, so change those to ivpu_dbg(). Add additional debug
logs for parameter validation in IOCTLs.
Check size provided by in metric streamer start and return -EINVAL
together with a debug message print.
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251104132418.970784-1-karol.wachowski@linux.intel.com
Extend DRM_IOCTL_AMDXDNA_GET_INFO to include additional parameters
that allow collection of telemetry data.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-3-lizhi.hou@amd.com
Extend DRM_IOCTL_AMDXDNA_GET_INFO to include additional parameters
that allow collection of resource data.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-2-lizhi.hou@amd.com
Add three hardware specific attributes to describe device capabilities:
hwctx_limit: The maximum number of hardware context supported.
max_tops: The maximum TOPS supported.
curr_tops: The TOPS achievable with the current power and frequency
configuration.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-1-lizhi.hou@amd.com
MSG_OP_CHAIN_EXEC_NPU is a unified mailbox message that replaces
MSG_OP_CHAIN_EXEC_BUFFER_CF and MSG_OP_CHAIN_EXEC_DPU.
Add driver logic to check firmware version, and if MSG_OP_CHAIN_EXEC_NPU
is supported, uses it to submit firmware commands.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251031014700.2919349-1-lizhi.hou@amd.com
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
When a command times out, mark it as ERT_CMD_STATE_TIMEOUT. Any other
commands that are canceled due to this timeout should be marked as
ERT_CMD_STATE_ABORT.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251029193423.2430463-1-lizhi.hou@amd.com
During power down, pending DVFS operations may still be in progress
when the NPU reset is asserted after CDYN=0 is set. Since the READY
bit may already be deasserted at this point, checking only the READY
bit is insufficient to ensure all transactions have completed.
Add an explicit check for CDYN de-assertion after the READY bit check
to guarantee no outstanding transactions remain before proceeding.
Fixes: 550f4dd2ce ("accel/ivpu: Add support for Nova Lake's NPU")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251030091700.293341-1-karol.wachowski@linux.intel.com
OS scheduling mode gets deprecated starting from NPU6 onward.
Print warning and fallback to HW scheduling mode if OS mode is
explicitly selected with sched_mode parameter.
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029201554.257708-1-karol.wachowski@linux.intel.com
Introduce a new ioctl `drm_ivpu_bo_create_from_userptr` that allows
users to create GEM buffer objects from user pointers to memory regions.
The user pointer must be page-aligned and the memory region must remain
valid for the buffer object's lifetime.
Userptr buffers enable direct use of mmapped files (e.g. inference
weights) in NPU workloads without copying data to NPU buffer objects.
This reduces memory usage and provides better flexibility for NPU
applications.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029091752.203198-1-karol.wachowski@linux.intel.com
Fix 'Memory manager not clean during takedown' warning that occurs
when ivpu_gem_bo_free() removes the BO from the BOs list before it
gets unmapped. Then file_priv_unbind() triggers a warning in
drm_mm_takedown() during context teardown.
Protect the unmapping sequence with bo_list_lock to ensure the BO is
always fully unmapped when removed from the list. This ensures the BO
is either fully unmapped at context teardown time or present on the
list and unmapped by file_priv_unbind().
Fixes: 48aea7f2a2 ("accel/ivpu: Fix locking in ivpu_bo_remove_all_bos_from_context()")
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029071451.184243-1-karol.wachowski@linux.intel.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029165642.364488-3-marco.crivellari@suse.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029165642.364488-2-marco.crivellari@suse.com
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://patch.msgid.link/20251027133956.393375-1-sakari.ailus@linux.intel.com
Rework of imported buffers introduced in the commit
e0c0891cd6 ("accel/ivpu: Rework bind/unbind of imported buffers")
switched the logic of imported buffers by dma mapping/unmapping
them just as the regular buffers.
The commit didn't include removal of skipping dma unmap of imported
buffers which results in them being mapped without unmapping.
Fixes: e0c0891cd6 ("accel/ivpu: Rework bind/unbind of imported buffers")
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://patch.msgid.link/20251027150933.2384538-1-maciej.falkowski@linux.intel.com
QAIC_MANAGE_EXT_MSG_LENGTH is ambiguous and has been confused with
QAIC_MANAGE_MAX_MSG_LENGTH. Rename it to clarify it's a wire length.
Signed-off-by: Troy Hanson <thanson@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: capitalize subject]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251022141606.3740470-1-youssef.abdulrahman@oss.qualcomm.com
Replace the word "Qranium" with "qaic" in the function parameter
description.
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: adjust word wrapping in commit text]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251022124107.3712466-1-youssef.abdulrahman@oss.qualcomm.com
Update the Sahara image table for the AIC200 to add entries for:
- qupv3fw.elf at id 54
- xbl_config.elf at id 38
- tz_qti_config.mbn at id 76
And move pvs.bin to id 78 to avoid firmware conflict.
Co-developed-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Co-developed-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017173432.1207656-1-youssef.abdulrahman@oss.qualcomm.com
Add a driver for Arm Ethos-U65/U85 NPUs. The Ethos-U NPU has a
relatively simple interface with single command stream to describe
buffers, operation settings, and network operations. It supports up to 8
memory regions (though no h/w bounds on a region). The Ethos NPUs
are designed to use an SRAM for scratch memory. Region 2 is reserved
for SRAM (like the downstream driver stack and compiler). Userspace
doesn't need access to the SRAM.
The h/w has no MMU nor external IOMMU and is a DMA engine which can
read and write anywhere in memory without h/w bounds checks. The user
submitted command streams must be validated against the bounds of the
GEM BOs. This is similar to the VC4 design which validates shaders.
The job submit is based on the rocket driver for the Rockchip NPU
utilizing the GPU scheduler. It is simpler as there's only 1 core rather
than 3.
Tested on i.MX93 platform (U65) and FVP (U85) with Mesa Teflon
support.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251020-ethos-v6-2-ecebc383c4b7@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
In aie2_get_hwctx_status() and aie2_query_ctx_status_array(), the
functions could return an uninitialized value in some cases. Update them
to always return 0. The amount of valid results is indicated by the
returned buffer_size, element_size, and num_element fields.
Fixes: 2f509fe6a4 ("accel/amdxdna: Add ioctl DRM_IOCTL_AMDXDNA_GET_ARRAY")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251024165503.1548131-1-lizhi.hou@amd.com
When the driver issues the SYNC_DEBUG_BO command, it currently returns 0
even if the firmware fails to execute the command. Update the driver to
return -EINVAL in this case to properly indicate the failure.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/aPsadTBXunUSBByV@stanley.mountain/
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251024162608.1544842-1-lizhi.hou@amd.com
Add support for NPU6 generation that will be present on Nova Lake CPUs.
As with previous generations, it maintains compatibility
so no bigger functional changes apart from removing
deprecated call to soc_cpu_drive() function.
Quiescing TOP_MMIO in SOC_CPU_NOC as part of boot procedure is no longer
needed starting from 60XX. Remove soc_cpu_drive() call from NPU6 onward.
The VPU_CPU_NOC_QREQN, VPU_CPU_NOC_QACCEPTN, and VPU_CPU_NOC_QDENY
registers are deprecated and non-functional on 60XX. They will be
removed in future generations.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20251022105348.2237273-1-maciej.falkowski@linux.intel.com
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
To collect firmware debug information, the userspace application allocates
a AMDXDNA_BO_DEV buffer object through DRM_IOCTL_AMDXDNA_CREATE_BO.
Then it associates the buffer with the hardware context through
DRM_IOCTL_AMDXDNA_CONFIG_HWCTX which requests firmware to bind the buffer
through a mailbox command. The firmware then writes the debug data into
this buffer. The buffer can be mapped into userspace so that
applications can retrieve and analyze the firmware debug information.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20251016203016.819441-1-lizhi.hou@amd.com
Use min_t() instead of min() to resolve compiler warnings for mismatched
types.
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251015153715.184143-1-youssef.abdulrahman@oss.qualcomm.com
Use check_add_overflow instead of size_add in sahara when
64b types are being added to ensure compatibility with 32b
systems. The size_add function parameters are of size_t, so
64b data types may be truncated when cast to size_t on 32b
systems. When using check_add_overflow, no type casts are made,
making it a more portable option.
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251015165408.213645-1-youssef.abdulrahman@oss.qualcomm.com
Add new parameter DRM_AMDXDNA_HW_LAST_ASYNC_ERR to get array IOCTL. When
hardware reports an error, the driver save the error information and
timestamp. This new get array parameter retrieves the last error.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20251014234119.628453-1-lizhi.hou@amd.com
Fix a race that can occur when multiple jobs submit the same dmabuf.
This could cause the sg_table to be mapped twice, leading to undefined
behavior.
Fixes: e0c0891cd6 ("accel/ivpu: Rework bind/unbind of imported buffers")
Signed-off-by: Wludzik, Jozef <jozef.wludzik@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20251014071725.3047287-1-karol.wachowski@linux.intel.com
AIC200 uses the newer "XBL" firmware implementation which changes the
expectations of how READ_DATA is performed. Larger data requests are
supported via streaming the data over the transport instead of requiring
a single transport transfer for everything.
Co-developed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007224045.605374-1-youssef.abdulrahman@oss.qualcomm.com
struct qaic_perf_stats is defined to have a DBC specified in the header,
followed by struct qaic_perf_stats_entry instances, each pointing to a BO
that is associated with the DBC. Currently, qaic_perf_stats_bo_ioctl() does
not check if the entries belong to the DBC specified in the header.
Therefore, add checks to ensure that each entry in the request is sliced
and belongs to hdr.dbc_id.
Co-developed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007221212.559474-1-youssef.abdulrahman@oss.qualcomm.com
Division is an expensive operation. Overflow check functions exist
already. Use existing overflow check functions rather than dividing to
check for overflow.
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007174218.469867-1-youssef.abdulrahman@oss.qualcomm.com
Found via code inspection that when encode_message() fails in the middle
of processing, instead of returning the actual error code, it always
returns -EINVAL. This is because the entire message length has not been
processed, and the error code is set to -EINVAL.
Instead, take the 'out' path on failure to return the actual error code.
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007170130.445878-1-youssef.abdulrahman@oss.qualcomm.com
If msg_xfer() is called and the channel ring does not have enough room
to accommodate the whole message, the function sleeps and tries again.
It uses retry_count to keep track of the number of retrials done. This
variable is not used after the space check succeeds. So, remove the
retry_count = 0 statement used later in the function.
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007161148.422744-1-youssef.abdulrahman@oss.qualcomm.com
Two threads of the same process can potential read and write parallelly to
head and tail pointers of the same DBC request queue. This could lead to a
race condition and corrupt the DBC request queue.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
[jhugo: Add fixes tag]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007061837.206132-1-youssef.abdulrahman@oss.qualcomm.com
Include linux/sched/signal.h in qaic_control.c
to avoid implicit inclusion of signal_pending().
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007154525.415039-1-youssef.abdulrahman@oss.qualcomm.com
Currently, if find_and_map_user_pages() takes a DMA xfer request from the
user with a length field set to 0, or in a rare case, the host receives
QAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_size
is equal to the requested transaction size, the function will return 0
before allocating an sgt or setting the fields of the dma_xfer struct.
In that case, encode_addr_size_pairs() will try to access the sgt which
will lead to a general protection fault.
Return an EINVAL in case the user provides a zero-sized ALP, or the device
requests continuation after all of the bytes have been transferred.
Fixes: 96d3c1cade ("accel/qaic: Clean up integer overflow checking in map_user_pages()")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007122320.339654-1-youssef.abdulrahman@oss.qualcomm.com
When a BO is created, qaic will use the page allocator to request the
memory chunks that the BO will be composed of in-memory. The number of
chunks increases when memory is segmented. For example, a 16MB BO can
be composed of four 4MB chunks or 4096 4KB chunks.
A BO is then sliced into a single or multiple slices to be transferred
to the device on the DBC's xfer queue. For that to happen, the slice
needs to encode its memory chunks into DBC requests and keep track of
them in an array, which is allocated using kcalloc(). Knowing that the
BO might be very fragmented, this array can grow so large that the
allocation may fail to find contiguous memory for it.
Replace kcalloc() with kvcalloc() to allocate the DBC requests array
for a slice.
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007121845.337382-1-youssef.abdulrahman@oss.qualcomm.com
As soon as we queue MHI buffers to receive the bootlog from the device,
we could be receiving data. Therefore all the resources needed to
process that data need to be setup prior to queuing the buffers.
We currently initialize some of the resources after queuing the buffers
which creates a race between the probe() and any data that comes back
from the device. If the uninitialized resources are accessed, we could
see page faults.
Fix the init ordering to close the race.
Fixes: 5f8df5c6de ("accel/qaic: Add bootlog debugfs")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007115750.332169-1-youssef.abdulrahman@oss.qualcomm.com
Add support to export BO as DMABUF to enable userspace to reuse buffers
and reduce number of copy.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007053853.193608-1-youssef.abdulrahman@oss.qualcomm.com
Currently the driver returns ABORTED for all errors that trigger engine
reset. It is better to distinguish between different error types by
returning the actual error code reported by firmware.
This allows userspace to take different actions based on the error type
and improves debuggability.
Refactor ivpu_job_signal_and_destroy() by extracting engine error
handling logic into a new function ivpu_job_handle_engine_error().
This simplifies engine error handling logic by removing necessity of
calling ivpu_job_singal_and_destroy() multiple times by a single job
changing it's behavior based on job status.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20251008061255.2909794-1-karol.wachowski@linux.intel.com
Trigger engine reset for any status code in the range.
This allows to add additional status codes in the future without
breaking compatibility between the firmware and the driver.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20251007083511.2817021-1-karol.wachowski@linux.intel.com
New API header includes additional status codes and range definitions
for error handling and improved API documentation.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20251007083451.2816990-1-karol.wachowski@linux.intel.com
When the hardware is powered down by auto-suspend, creating or destroying
a hardware context without resuming power will fail.
Call amdxdna_pm_resume_get() before requesting the hardware to create or
destroy a hardware context.
Fixes: 063db45183 ("accel/amdxdna: Enhance runtime power management")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20251008045324.4171807-1-lizhi.hou@amd.com
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formatting the value to be
returned to user space. So replace snprintf() with sysfs_emit().
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: Fix commit text typos]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250822112804.1726592-1-chelsyratnawat2001@gmail.com
Replace kcalloc() followed by copy_from_user() with memdup_array_user()
to improve and simplify both __qaic_execute_bo_ioctl() and
qaic_perf_stats_bo_ioctl().
In __qaic_execute_bo_ioctl(), return early if an error occurs and remove
the obsolete 'free_exec' label.
Since memdup_array_user() already checks for multiplication overflow,
remove the manual check in __qaic_execute_bo_ioctl(). Remove any unused
local variables accordingly.
Since 'ret = copy_from_user()' has been removed, initialize 'ret = 0' to
preserve the same return value on success.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250917124805.90395-4-thorsten.blum@linux.dev
Replace kzalloc() followed by copy_from_user() with memdup_user() to
improve and simplify qaic_attach_slice_bo_ioctl().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250917124805.90395-2-thorsten.blum@linux.dev
The pcode MAILBOX STATUS register PARAM2 field expects DCT active
percent in U1.7 value format. Convert percentage value to this
format before writing to the register.
Fixes: a19bffb10c ("accel/ivpu: Implement DCT handling")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20251001104322.1249896-1-karol.wachowski@linux.intel.com
Add additional warnings related to allocation and
deallocation of buffer objects to better track possible
memory leaks and generally the BO's lifecycle.
Introduce checks for handle_count to ensure it is zero
before creating a new handle, and exactly one
after successfully creating a handle.
Introduce also a check to warn if the VMA node is not
empty when freeing the buffer object.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250925145154.1446427-1-maciej.falkowski@linux.intel.com
Fix doc description of job structure as it is
improperly formatted. Align order of job structure's
fields according to the documentation.
Fixes: 0bf37f45d5 ("accel/ivpu: Add support for user-managed preemption buffer")
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250925145131.1446323-1-maciej.falkowski@linux.intel.com
Don't add BO to the vdev->bo_list in ivpu_gem_create_object().
When failure happens inside drm_gem_shmem_create(), the BO is not
fully created and ivpu_gem_bo_free() callback will not be called
causing a deleted BO to be left on the list.
Fixes: 8d88e4cdce ("accel/ivpu: Use GEM shmem helper for all buffers")
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250925145114.1446283-1-maciej.falkowski@linux.intel.com
Ensure that imported buffers are properly mapped and unmapped in
the same way as regular buffers to properly handle buffers during
device's bind and unbind operations to prevent resource leaks and
inconsistent buffer states.
Imported buffers are now dma_mapped before submission and
dma_unmapped in ivpu_bo_unbind(), guaranteeing they are unmapped
when the device is unbound.
Add also imported buffers to vdev->bo_list for consistent unmapping
on device unbind. The bo->ctx_id is set in open() so imported
buffers have a valid context ID.
Debug logs have been updated to match the new code structure.
The function ivpu_bo_pin() has been renamed to ivpu_bo_bind()
to better reflect its purpose, and unbind tests have been refactored
for improved coverage and clarity.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250925145059.1446243-1-maciej.falkowski@linux.intel.com
Add new boot parameter for NPU5+ that enables
ECC signalling for on-chip memory based on the value
of MSR_INTEGRITY_CAPS register.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250925145020.1446208-1-maciej.falkowski@linux.intel.com
Split firmware boot parameters (4KB) and FW version (4KB) into dedicated
buffer objects, separating them from the FW runtime memory buffer. This
creates three distinct buffers with independent allocation control.
This enables future modifications, particularly allowing the FW
image memory to be moved into a read-only buffer.
Fix user range starting address from incorrect 0x88000000 (2GB + 128MB)
overlapping global aperture on 37XX to intended 0xa0000000 (2GB + 512MB).
This caused no issues as FW aligned this range to 512MB anyway, but
corrected for consistency.
Convert ivpu_hw_range_init() from inline helper to function with overflow
validation to prevent potential security issues from address range
arithmetic overflows.
Improve readability of ivpu_fw_parse() function, remove unrelated constant
defines and validate firmware header values based on vdev->hw->ranges.
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250925074209.1148924-1-karol.wachowski@linux.intel.com
On HL338 ASICs, the Infineon first‑stage firmware is not present and
the reported version is 0. In this case printing a version number is
misleading, as it suggests valid firmware when it does not exist.
Fix this by printing the first‑stage Infineon firmware version only
if the reported value is non‑zero. This avoids confusing or incorrect
log messages on devices where the first stage is not applicable.
Signed-off-by: Pavan S <pavan.sreenivas@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Dirty state can occur when the host VM undergoes a reset while the
device does not. In such a case, the driver must reset the device before
it can be used again. As part of this reset, the device capabilities
are zeroed. Therefore, the driver must read the Preboot status again to
learn the Preboot state, capabilities, and security configuration.
Signed-off-by: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Add a new passthrough type HL_GET_P_STATE to the cpucp generic ioctl
to allow userspace to read the device performance state via firmware.
Signed-off-by: Ariel Aviad <ariel.aviad@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Introduce NVMe Direct I/O (HLDIO) infrastructure to support
peer‑to‑peer DMA in the habanalabs driver. This adds internal helpers
and data structures to enable direct transfers between NVMe storage
and device memory.
The feature is built only when CONFIG_HL_HLDIO is enabled. A debugfs
interface is also provided for functional validation.
Signed-off-by: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
Reviewed-by: Farah Kassabri <farah.kassabri@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
When IOMMU is enabled, dma_alloc_coherent() with GFP_USER may return
addresses from the vmalloc range. If such an address is mapped without
VM_MIXEDMAP, vm_insert_page() will trigger a BUG_ON due to the
VM_PFNMAP restriction.
Fix this by checking for vmalloc addresses and setting VM_MIXEDMAP
in the VMA before mapping. This ensures safe mapping and avoids kernel
crashes. The memory is still driver-allocated and cannot be accessed
directly by userspace.
Signed-off-by: Moti Haimovski <moti.haimovski@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
The access_ok() API no longer requires the VERIFY_WRITE argument,
and the use of the old interface with VERIFY_WRITE is deprecated.
Clean up the habanalabs memory manager to use the modern access_ok()
interface consistently. This removes old #ifdef guards and aligns the
driver with current upstream kernel APIs.
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
After CPLD shutdown event the device is not usable anymore. The common
CPLD_SHUTDOWN event handler disables any subsequent device access.
Signed-off-by: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
After a CPLD shutdown event the device becomes unusable. Prevent further
device access once this event is received.
Signed-off-by: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
In hl_release_dmabuf(), ctx is dereferenced after calling hl_ctx_put()
to obtain the compute device file.
This is safe because the dma-buf object holds a file reference taken in
export_dmabuf(), and the file release (which drops another ctx reference)
can only happen after we drop that file reference via fput(). Thus, this
hl_ctx_put() call cannot be the last one at this point.
Add a comment explaining this to avoid confusion.
Signed-off-by: Tomer Tayar <tomer.tayar@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Add infrastructure for logging the last configuration register accesses
that occur via debugfs read/write operations. At interrupt time, these
log entries can be dumped to dmesg, which helps in diagnosing the cause
of RAZWI and ADDR_DEC interrupts.
The logging is implemented as a ring buffer of access entries, with each
entry recording timestamp and access details. To ensure correctness
under concurrent access, operations are now protected using spinlocks.
Entries are copied under lock and then printed after releasing it, which
minimizes time spent in the critical section.
Signed-off-by: Sharley Calzolari <sharley.calzolari@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Add a new CPUCP generic message type to retrieve HBM, SRAM and critical
error counters from the device.
Signed-off-by: Vitaly Margolin <vitaly.margolin@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Change the BMON_CR register value back to its original state before
enabling, so that BMON does not continue to collect information
after being disabled.
Signed-off-by: Vered Yavniely <vered.yavniely@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
EFAULT is currently returned if less than requested user pages are
pinned. This value means a "bad address" which might be confusing to
the user, as the address of the given user memory is not necessarily
"bad".
Modify the return value to ENOMEM, as "out of memory" is more suitable
in this case.
Signed-off-by: Tomer Tayar <tomer.tayar@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Currently, pm_runtime_resume_and_get() is invoked in the driver's open
callback, and pm_runtime_put_autosuspend() is called in the close
callback. As a result, the device remains active whenever an application
opens it, even if no I/O is performed, leading to unnecessary power
consumption.
Move the runtime PM calls to the AIE2 callbacks that actually interact
with the hardware. The device will automatically suspend after 5 seconds
of inactivity (no hardware accesses and no pending commands), and it will
be resumed on the next hardware access.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250923152229.1303625-1-lizhi.hou@amd.com
Allow user mode drivers to manage preemption buffers, enabling
memory savings by sharing a single buffer across multiple
command queues within the same memory context.
Introduce DRM_IVPU_PARAM_PREEMPT_BUFFER_SIZE to report the required
preemption buffer size as specified by the firmware.
The preemption buffer is now passed from user space as an entry
in the BO list of DRM_IVPU_CMDQ_SUBMIT. The buffer must be
non-mappable and large enough to hold preemption data.
For backward compatibility, the kernel will allocate an internal
preemption buffer if user space does not provide one.
User space can only provide a single preemption buffer,
simplifying the ioctl interface and parameter validation.
A separate secondary preemption buffer is only needed
to save below 4GB address space on 37xx and only if preemption
buffers are not shared.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250915103437.830086-1-karol.wachowski@linux.intel.com
Previously, aborting work could return early after engine reset or resume
failure, skipping the necessary runtime_put cleanup leaving the device
with incorrect reference count breaking runtime power management state.
Replace early returns with goto statements to ensure runtime_put is always
executed.
Fixes: a47e36dc5d ("accel/ivpu: Trigger device recovery on engine reset/resume failure")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250916084809.850073-1-karol.wachowski@linux.intel.com
Remove references to firmware boot parameters that were never used
by any production version of device firmware.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250915103553.830151-1-karol.wachowski@linux.intel.com
Reduce code duplication and improve the overall readability of the debugfs
output for job scheduling priority bands.
Additionally fix clang-tidy warning about missing default case in the
switch statement.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250915103401.830045-1-karol.wachowski@linux.intel.com
Ensure that cmdq->db_id is reset to 0 if ivpu_jsm_register_db fails,
preventing potential reuse of invalid command queue with
unregistered doorbell.
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250915103421.830065-1-karol.wachowski@linux.intel.com
In amdxdna_gem_obj_vmap(), calling dma_buf_vmap() triggers a kernel
warning if LOCKDEP is enabled. So for imported object, use
dma_buf_vmap_unlocked(). Then, use drm_gem_vmap() for other objects.
The similar change applies to vunmap code.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250916174842.234709-1-lizhi.hou@amd.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmjHMcoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5bwH/23w8iGB4hf7L/7Z
e7blX42Pe9EXA1uK62iWmwEjDvBuJ7TmVfXH09qYJ56fj6/rJEdpQwtBMd4ypL81
QA/7lq5UEl0apPzMN86J8EHCzmjNzv7o+UtEd4C/hPFEZHZJa5Hqj9CBglSwSCEn
fTkLk7Gl6s8SfzBQ/rXX6/ZChAB/RleVWabDlIQMDz++/+9DZ0aqphj+5bYSqysL
ROQOaj4LOICuLfrup9J61hKNBoF7Dv3sO20vc+Iic0XHRPZ6/lKCnHgCUsqVIOOQ
L4kDT7XKQg+n3ttjrMe84/8iHZdWtf8VMWrtniPT8e1YGYuMpavVplgIcFoFCoNm
Qa7NPDs=
=rZeT
-----END PGP SIGNATURE-----
Merge tag 'v6.17-rc6' into drm-next
This is a backmerge of Linux 6.17-rc6, needed for msm,
also requested by misc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The unpublished smatch static checker reported a warning.
drivers/accel/amdxdna/aie2_pci.c:904 aie2_query_ctx_status_array()
warn: potential user controlled sizeof overflow
'args->num_element * args->element_size' '1-u32max(user) * 1-u32max(user)'
Even this will not cause a real issue, it is better to put a reasonable
limitation for element_size and num_element. Add condition to make sure
the input element_size <= 4K and num_element <= 1K.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/aL56ZCLyl3tLQM1e@stanley.mountain/
Fixes: 2f509fe6a4 ("accel/amdxdna: Add ioctl DRM_IOCTL_AMDXDNA_GET_ARRAY")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250909154531.3469979-1-lizhi.hou@amd.com
Add interface for applications to get information array. The application
provides a buffer pointer along with information type, maximum number of
entries and maximum size of each entry. The buffer may also contain match
conditions based on the information type. After the ioctl completes, the
actual number of entries and entry size are returned. (see [1], used by
driver runtime library)
[1] https://github.com/amd/xdna-driver/blob/main/src/shim/host/platform_host.cpp#L337
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250903053402.2103196-1-lizhi.hou@amd.com
Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini()
to ensure that no new recovery work items can be queued after device
removal has started. Previously, recovery work could be scheduled even
after canceling existing work, potentially leading to use-after-free
bugs if recovery accessed freed resources.
Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better
reflect its new behavior.
Fixes: 58cde80f45 ("accel/ivpu: Use dedicated work for job timeout detection")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250808110939.328366-1-jacek.lawrynowicz@linux.intel.com
The problem is that pm_runtime_get_sync() can return 1 on success so
checking for zero doesn't work. Use the pm_runtime_resume_and_get()
function instead. The pm_runtime_resume_and_get() function does
additional cleanup as well so that's a bonus as well.
Fixes: 0810d5ad88 ("accel/rocket: Add job submission IOCTL")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/aKcRW6fsRP_o5C_y@stanley.mountain
Right now, the code checks the DMA_READ_ERROR state 2 times, while
I guess it was supposed to warn about both read and write errors.
Change the 2nd check to look at the write-error flag.
Fixes: 0810d5ad88 ("accel/rocket: Add job submission IOCTL")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250818185658.2585696-1-heiko@sntech.de
Replace usages of kfree() with kvfree() for pointers which were
allocated using kvmalloc(), as required by the kernel memory management
API.
Use sizeof() on the type that a pointer references instead of the
pointer itself. In this case, scheds and *scheds both happen to be
pointers, so sizeof() will expand to the same value in either case, but
using *scheds is more technically correct since scheds is an array of
drm_gpu_scheduler *.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202508120730.PLbjlKbI-lkp@intel.com/
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250813-rocket-free-fix-v1-1-51f00a7a1271@brighamcampbell.com
Fixes: 0810d5ad88 ("accel/rocket: Add job submission IOCTL")
With the current dependency on only DRM, a config of
CONFIG_DRM_ACCEL_ROCKET=y
is possible, but of course wrong, because without DRM_ACCEL the build-
system will never even enter drivers/accel/* .
So depend on DRM_ACCEL instead of just DRM.
Fixes: ed98261b41 ("accel/rocket: Add a new driver for Rockchip's NPU")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250814113519.1551855-3-heiko@sntech.de
The general indentation for the Kconfig lines is one tab, so adapt the
lines accordingly.
The description is correctly indented (1 tab + 2 spaces) so doesn't need
changes.
Fixes: ed98261b41 ("accel/rocket: Add a new driver for Rockchip's NPU")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250814113519.1551855-2-heiko@sntech.de
Change the 'ret' variable from u32 to int to store -EINVAL. Storing the
negative error codes in unsigned type, doesn't cause an issue at runtime
but it's ugly as pants.
Additionally, assigning -EINVAL to u32 ret (i.e., u32 ret = -EINVAL) may
trigger a GCC warning when the -Wsign-conversion flag is enabled.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250828033917.113364-1-rongqianfeng@vivo.com
Walking hardware contexts created by a process is duplicated in multiple
spots. Add a function, amdxdna_hwctx_walk(), and replace all spots.
hwctx_srcu and dev_lock are good enough to protect hardware context list.
Remove hwctx_lock.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250815171634.3417487-1-lizhi.hou@amd.com
Use kvfree() to fix the following Coccinelle/coccicheck warning reported
by kfree_mismatch.cocci:
WARNING kvmalloc is used to allocate this memory at line 10398
Fixes: f728c17fc9 ("accel/habanalabs/gaudi2: move HMMU page tables to device memory")
Reported-by: Qianfeng Rong <rongqianfeng@vivo.com>
Closes: https://patch.msgid.link/20250808085530.233737-1-rongqianfeng@vivo.com
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
[lukas: acknowledge Qianfeng, adjust Thorsten's domain, add Fixes tag]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Cc: stable@vger.kernel.org # v6.9+
Link: https://patch.msgid.link/20240820231028.136126-1-thorsten.blum@toblux.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaJtqogAKCRBZ7Krx/gZQ
6+FEAQDw4ljGzHf0Yi8Fv7kDYKdRhetqaY8jR0FOOn0gsOkoagEAmEUsczpRnRar
5rGnHKImSBPYShduUbStsap8OxtlzwA=
=YmfX
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull habanalabs fix from Al Viro:
"Yet another use-after-free fix due to dma_buf_fd() misuse"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
habanalabs: fix UAF in export_dmabuf()
The suspend and resume callbacks for pm and runtime pm should be same.
During suspending, it needs to stop all hardware contexts first. And
the hardware contexts will be restarted after the device is resumed.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250803191450.1568851-1-lizhi.hou@amd.com
Replace DRM_GPU_SCHED_STAT_NOMINAL with GPU_DRM_SCHED_STAT_RESET, in
accordance with commit 0a5dc1b67e ("drm/sched: Rename
DRM_GPU_SCHED_STAT_NOMINAL to DRM_GPU_SCHED_STAT_RESET")
Pass extra parameter to drm_sched_job_init, as required by commit
2956554823 ("drm/sched: Store the drm client_id in drm_sched_fence")
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250802-fix-rockchip-npu-build-v1-1-fb0f0dacb3fe@brighamcampbell.com
non-drm:
rust:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
mtd:
- driver for Intel GPU non-volatile storage
i2c
- designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support
-----BEGIN PGP SIGNATURE-----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=n9MO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
The NPU cores have their own access to the memory bus, and this isn't
cache coherent with the CPUs.
Add IOCTLs so userspace can mark when the caches need to be flushed, and
also when a writer job needs to be waited for before the buffer can be
accessed from the CPU.
Initially based on the same IOCTLs from the Etnaviv driver.
v2:
- Don't break UABI by reordering the IOCTL IDs (Jeff Hugo)
v3:
- Check that padding fields in IOCTLs are zero (Jeff Hugo)
v6:
- Fix conversion logic to make sure we use DMA_BIDIRECTIONAL when needed
(Lucas Stach)
v8:
- Always sync BOs in both directions (Robin Murphy)
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-5-77ebd484941e@tomeuvizoso.net
Using the DRM GPU scheduler infrastructure, with a scheduler for each
core.
Userspace can decide for a series of tasks to be executed sequentially
in the same core, so SRAM locality can be taken advantage of.
The job submission code was initially based on Panfrost.
v2:
- Remove hardcoded number of cores
- Misc. style fixes (Jeffrey Hugo)
- Repack IOCTL struct (Jeffrey Hugo)
v3:
- Adapt to a split of the register block in the DT bindings (Nicolas
Frattaroli)
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
- Use drm_* logging functions (Thomas Zimmermann)
- Rename reg i/o macros (Thomas Zimmermann)
- Add padding to ioctls and check for zero (Jeff Hugo)
- Improve error handling (Nicolas Frattaroli)
v6:
- Use mutexes guard (Markus Elfring)
- Use u64_to_user_ptr (Jeff Hugo)
- Drop rocket_fence (Rob Herring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Use reset lines to reset the cores (Robin Murphy)
- Use the macros to compute the values for the bitfields (Robin Murphy)
- More descriptive name for the IRQ (Robin Murphy)
- Simplify job interrupt handing (Robin Murphy)
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Specify the size of the embedded structs in the IOCTLs for future
extensibility (Rob Herring)
- Expose only 32 bits for the address of the regcmd BO (Robin Murphy)
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-4-77ebd484941e@tomeuvizoso.net
This uses the SHMEM DRM helpers and we map right away to the CPU and NPU
sides, as all buffers are expected to be accessed from both.
v2:
- Sync the IOMMUs for the other cores when mapping and unmapping.
v3:
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
v6:
- Use mutexes guard (Markus Elfring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Allocate DMA address ourselves with drm_mm (Robin Murphy)
- Use refcount_read (Heiko Stuebner)
- Remove superfluous dma_sync_sgtable_for_device (Robin Murphy)
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-3-77ebd484941e@tomeuvizoso.net
This initial version supports the NPU as shipped in the RK3588 SoC and
described in the first part of its TRM, in Chapter 36.
This NPU contains 3 independent cores that the driver can submit jobs
to.
This commit adds just hardware initialization and power management.
v2:
- Split cores and IOMMUs as independent devices (Sebastian Reichel)
- Add some documentation (Jeffrey Hugo)
- Be more explicit in the Kconfig documentation (Jeffrey Hugo)
- Remove resets, as these haven't been found useful so far (Zenghui Yu)
- Repack structs (Jeffrey Hugo)
- Use DEFINE_DRM_ACCEL_FOPS (Jeffrey Hugo)
- Use devm_drm_dev_alloc (Jeffrey Hugo)
- Use probe log helper (Jeffrey Hugo)
- Introduce UABI header in a later patch (Jeffrey Hugo)
v3:
- Adapt to a split of the register block in the DT bindings (Nicolas
Frattaroli)
- Move registers header to its own commit (Thomas Zimmermann)
- Misc. cleanups (Thomas Zimmermann and Jeff Hugo)
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
- PM improvements (Nicolas Frattaroli)
v4:
- Use bulk clk API (Krzysztof Kozlowski)
v6:
- Remove mention to NVDLA, as the hardware is only incidentally related
(Kever Yang)
- Use calloc instead of GFP_ZERO (Jeff Hugo)
- Explicitly include linux/container_of.h (Jeff Hugo)
- pclk and npu clocks are now needed by all cores (Rob Herring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Kconfig: fix depends to be more explicit about Rockchip, and remove
superfluous selects (Robin Murphy)
- Use reset lines to reset the cores (Robin Murphy)
- Reference count the module
- Set dma_set_max_seg_size
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Remove notion of top core (Robin Murphy)
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-2-77ebd484941e@tomeuvizoso.net
A XML file was generated with the data from the TRM, and then this
header was generated from it.
The canonical location for the XML file is the Mesa3D repository.
v3:
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
v8:
- Remove full MIT license blob, to match other files with the same
licensing arrangement in the kernel
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-1-77ebd484941e@tomeuvizoso.net
The device is managed so pci_free_irq_vectors() is called automatically
no need to do it manually.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/aHs8QAfUlFeNp7qL@pc
Enhance DRM_IOCTL_AMDXDNA_CREATE_BO to accept user space allocated
buffer pointer. The buffer pages will be pinned in memory. Unless
the CAP_IPC_LOCK is enabled for the application process, the total
pinned memory can not beyond rlimit_memlock.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250716164414.112091-1-lizhi.hou@amd.com
This breaks on PREEMPT_RT, and should be unneeded since
lockdep can track irq disabled status itself.
Link: https://lore.kernel.org/r/20250715165919.33754-1-dev@lankhorst.se
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Among the scheduler's statuses, the only one that indicates an error is
DRM_GPU_SCHED_STAT_ENODEV. Any status other than DRM_GPU_SCHED_STAT_ENODEV
signifies that the operation succeeded and the GPU is in a nominal state.
However, to provide more information about the GPU's status, it is needed
to convey more information than just "OK".
Therefore, rename DRM_GPU_SCHED_STAT_NOMINAL to
DRM_GPU_SCHED_STAT_RESET, which better communicates the meaning of this
status. The status DRM_GPU_SCHED_STAT_RESET indicates that the GPU has
hung, but it has been successfully reset and is now in a nominal state
again.
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-1-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
As soon as we'd inserted a file reference into descriptor table, another
thread could close it. That's fine for the case when all we are doing is
returning that descriptor to userland (it's a race, but it's a userland
race and there's nothing the kernel can do about it). However, if we
follow fd_install() with any kind of access to objects that would be
destroyed on close (be it the struct file itself or anything destroyed
by its ->release()), we have a UAF.
dma_buf_fd() is a combination of reserving a descriptor and fd_install().
habanalabs export_dmabuf() calls it and then proceeds to access the
objects destroyed on close. In particular, it grabs an extra reference to
another struct file that will be dropped as part of ->release() for ours;
that "will be" is actually "might have already been".
Fix that by reserving descriptor before anything else and do fd_install()
only when everything had been set up. As a side benefit, we no longer
have the failure exit with file already created, but reference to
underlying file (as well as ->dmabuf_export_cnt, etc.) not grabbed yet;
unlike dma_buf_fd(), fd_install() can't fail.
Fixes: db1a8dd916 ("habanalabs: add support for dma-buf exporter")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Requirement is to create per client-id based directories to
hold key debugging information and for that access to
root debugfs dentry is need which is not in one place
and that information cannot be stored in drm_device.
Move the debugfs functionality from drm_drv.c and drm_accel.c
to drm_debugfs.c This enables debugfs root node reference
directly drm_debugfs.c and hence enable to create per client-id
directory.
v8: Create drm_accel dentry only if it's config is enabled (Jeff, Hugo)
v8: Merge drm_drv and drm_accel debugfs patches (Koenig, Christian)
v10: Since we moved drm_debugfs_root, hence to handle drm bridge
debugfs add a new function which call drm_bridge_debugfs_params where
drm_debugfs_root is accessible.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-2-sunil.khatri@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UAPI Changes:
- Add Task Information for the wedge API
Cross-subsystem Changes:
Core Changes:
- Fix warnings related to export.h
- fbdev: Make CONFIG_FIRMWARE_EDID available on all architectures
- fence: Fix UAF issues
- format-helper: Improve tests
Driver Changes:
- ivpu: Add turbo flag, Add Wildcat Lake Support
- rz-du: Improve MIPI-DSI Support
- vmwgfx: fence improvement
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaFOwgQAKCRAnX84Zoj2+
dkbjAX9aGa2vGeoz9fiT4wMMvxWzLSW7EzJW9oC/iFitHOcmd0yUZCfdmUfukQ3T
cXtVHFcBf3clQ1iI4fV8EQwLOEaBpQ1H642/41pAebXOr9kQ6JOQ4AqhJBqamJzv
teGbWnA2+w==
=inwC
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2025-06-19' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.17:
UAPI Changes:
- Add Task Information for the wedge API
Cross-subsystem Changes:
Core Changes:
- Fix warnings related to export.h
- fbdev: Make CONFIG_FIRMWARE_EDID available on all architectures
- fence: Fix UAF issues
- format-helper: Improve tests
Driver Changes:
- ivpu: Add turbo flag, Add Wildcat Lake Support
- rz-du: Improve MIPI-DSI Support
- vmwgfx: fence improvement
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250619-perfect-industrious-whippet-8ed3db@houat
The device bo is allocated from the device heap memory. (a trunk of
memory dedicated to device)
Rename amdxdna_gem_insert_node_locked to amdxdna_gem_heap_alloc
and move related sanity checks into it.
Add amdxdna_gem_dev_obj_free and move device bo free code into it.
Calculate the kernel virtual address of device bo by the device
heap memory address and offset.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250616091418.2605476-1-lizhi.hou@amd.com
Introduce a new parameter to the DRM_IVPU_CMDQ_CREATE ioctl,
enabling turbo mode for jobs submitted via the command queue.
Turbo mode allows jobs to run at higher frequencies,
potentially improving performance for demanding workloads.
Also adds the IVPU_TEST_MODE_TURBO_DISABLE flag to allow test
mode to explicitly disable turbo mode requested by the application.
The IVPU_TEST_MODE_TURBO mode has been renamed to
IVPU_TEST_MODE_TURBO_ENABLE for clarity and consistency.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250605162001.1237789-1-maciej.falkowski@linux.intel.com
Add support for Wildcat Lake (WCL) CPUs.
Wildcat Lake contains NPU5 just like Panther Lake
hence the initial support is very simple and adds
only PCI IDs.
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250605161947.1237727-1-maciej.falkowski@linux.intel.com
The incorrect PSP firmware size is used for initializing. It may
cause error for newer version firmware.
Fixes: 8c9ff1b181 ("accel/amdxdna: Add a new driver for AMD AI Engine")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250604143217.1386272-1-lizhi.hou@amd.com
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Handles are per-file, not global, so this makes no sense. Plus it's
set only after calling drm_gem_handle_create(), and drivers are not
allowed to further initialize a bo after that function has published it
already.
It is also entirely unused, which helps enormously with removing it
:-)
Since we're still holding a reference to the bo nothing bad can
happen, hence not cc: stable material.
Cc: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Cc: Carl Vanderlip <quic_carlv@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250528091307.1894940-5-simona.vetter@ffwll.ch
Don't WARN if imported buffers are in use in ivpu_gem_bo_free() as they
can be indeed used in the original context/driver.
Fixes: 647371a660 ("accel/ivpu: Add GEM buffer object management")
Cc: stable@vger.kernel.org # v6.3
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250528171220.513225-1-jacek.lawrynowicz@linux.intel.com
Trigger full device recovery when the driver fails to restore device state
via engine reset and resume operations. This is necessary because, even if
submissions from a faulty context are blocked, the NPU may still process
previously submitted faulty jobs if the engine reset fails to abort them.
Such jobs can continue to generate faults and occupy device resources.
When engine reset is ineffective, the only way to recover is to perform
a full device recovery.
Fixes: dad945c27a ("accel/ivpu: Add handling of VPU_JSM_STATUS_MVNCI_CONTEXT_VIOLATION_HW")
Cc: stable@vger.kernel.org # v6.15+
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250528154253.500556-1-jacek.lawrynowicz@linux.intel.com
This fixes a potential race conditions in:
- ivpu_bo_unbind_locked() where we modified the shmem->sgt without
holding the dma_resv_lock().
- ivpu_bo_print_info() where we read the shmem->pages without
holding the dma_resv_lock().
Using dma_resv_lock() also protects against future syncronisation
issues that may arise when accessing drm_gem_shmem_object or
drm_gem_object members.
Fixes: 42328003ec ("accel/ivpu: Refactor BO creation functions")
Cc: stable@vger.kernel.org # v6.9+
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250528154325.500684-1-jacek.lawrynowicz@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
Add new inference_timeout_ms parameter that allows specifying
maximum allowed duration in milliseconds that inference can take before
triggering a recovery.
Calculate maximum number of heartbeat retries based on ratio between
inference timeout and tdr timeout.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250515093128.252041-1-jacek.lawrynowicz@linux.intel.com
Including:
- Core:
- Introduction of iommu-pages infrastructure to consolitate page-table
allocation code among hardware drivers. This is ground-work for more
generalization in the future.
- Remove IOMMU_DEV_FEAT_SVA and IOMMU_DEV_FEAT_IOPF feature flags.
- Convert virtio-iommu to domain_alloc_paging().
- KConfig cleanups.
- Some small fixes for possible overflows and race conditions.
- Intel VT-d driver:
- Restore WO permissions on second-level paging entries.
- Use ida to manage domain id.
- Miscellaneous cleanups.
- AMD-Vi:
- Make sure notifiers finish running before module unload.
- Add support for HTRangeIgnore feature.
- Allow matching ACPI HID devices without matching UIDs.
- ARM-SMMU:
- SMMUv2:
- Recognise the compatible string for SAR2130P MDSS in the Qualcomm
driver, as this device requires an identity domain.
- Fix Adreno stall handling so that GPU debugging is more robust and
doesn't e.g. result in deadlock.
- SMMUv3:
- Fix ->attach_dev() error reporting for unrecognised domains.
- IO-pgtable:
- Allow clients (notably, drivers that process requests from
userspace) to silence warnings when mapping an already-mapped IOVA.
- S390:
- Add support for additional table regions.
- Mediatek:
- Add support for MT6893 MM IOMMU.
- Some smaller fixes and improvements in various other drivers.
-----BEGIN PGP SIGNATURE-----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=RmX9
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core:
- Introduction of iommu-pages infrastructure to consolitate
page-table allocation code among hardware drivers. This is
ground-work for more generalization in the future
- Remove IOMMU_DEV_FEAT_SVA and IOMMU_DEV_FEAT_IOPF feature flags
- Convert virtio-iommu to domain_alloc_paging()
- KConfig cleanups
- Some small fixes for possible overflows and race conditions
Intel VT-d driver:
- Restore WO permissions on second-level paging entries
- Use ida to manage domain id
- Miscellaneous cleanups
AMD-Vi:
- Make sure notifiers finish running before module unload
- Add support for HTRangeIgnore feature
- Allow matching ACPI HID devices without matching UIDs
ARM-SMMU:
- SMMUv2:
- Recognise the compatible string for SAR2130P MDSS in the
Qualcomm driver, as this device requires an identity domain
- Fix Adreno stall handling so that GPU debugging is more robust
and doesn't e.g. result in deadlock
- SMMUv3:
- Fix ->attach_dev() error reporting for unrecognised domains
- IO-pgtable:
- Allow clients (notably, drivers that process requests from
userspace) to silence warnings when mapping an already-mapped
IOVA
S390:
- Add support for additional table regions
Mediatek:
- Add support for MT6893 MM IOMMU
And some smaller fixes and improvements in various other drivers"
* tag 'iommu-updates-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (75 commits)
iommu/vt-d: Restore context entry setup order for aliased devices
iommu/mediatek: Fix compatible typo for mediatek,mt6893-iommu-mm
iommu/arm-smmu-qcom: Make set_stall work when the device is on
iommu/arm-smmu: Move handing of RESUME to the context fault handler
iommu/arm-smmu-qcom: Enable threaded IRQ for Adreno SMMUv2/MMU500
iommu/io-pgtable-arm: Add quirk to quiet WARN_ON()
iommu: Clear the freelist after iommu_put_pages_list()
iommu/vt-d: Change dmar_ats_supported() to return boolean
iommu/vt-d: Eliminate pci_physfn() in dmar_find_matched_satc_unit()
iommu/vt-d: Replace spin_lock with mutex to protect domain ida
iommu/vt-d: Use ida to manage domain id
iommu/vt-d: Restore WO permissions on second-level paging entries
iommu/amd: Allow matching ACPI HID devices without matching UIDs
iommu: make inclusion of arm/arm-smmu-v3 directory conditional
iommu: make inclusion of riscv directory conditional
iommu: make inclusion of amd directory conditional
iommu: make inclusion of intel directory conditional
iommu: remove duplicate selection of DMAR_TABLE
iommu/fsl_pamu: remove trailing space after \n
iommu/arm-smmu-qcom: Add SAR2130P MDSS compatible
...
AIC100 devices generates Reliability, Availability, Serviceability events
via MHI QAIC_STATUS channel. Support such events and print a structured
log with details of the events, and if the event describes an uncorrected
error, reset the device to put it back into service. As these events may
not all be reported via other mechanisms like AER, maintain counts of
the number of errors observed for each type.
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250516160634.1408309-1-jeff.hugo@oss.qualcomm.com
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----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=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
This will be used in a later commit to trace the drm client_id in
some of the gpu_scheduler trace events.
This requires changing all the users of drm_sched_job_init to
add an extra parameter.
The newly added drm_client_id field in the drm_sched_fence is a bit
of a duplicate of the owner one. One suggestion I received was to
merge those 2 fields - this can't be done right now as amdgpu uses
some special values (AMDGPU_FENCE_OWNER_*) that can't really be
translated into a client id. Christian is working on getting rid of
those; when it's done we should be able to squash owner/drm_client_id
together.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250526125505.2360-3-pierre-eric.pelloux-prayer@amd.com
Refactor ivpu_cmdq_unregister() to ensure the doorbell is unregistered
before destroying the command queue. The NPU firmware requires doorbells
to be unregistered prior to command queue destruction.
If doorbell remains registered when command queue destroy command is sent
firmware will automatically unregister the doorbell, making subsequent
unregister attempts no-operations (NOPs).
Ensure compliance with firmware expectations by moving the doorbell
unregister call ahead of the command queue destruction logic,
thus preventing unnecessary NOP operation.
Fixes: 465a3914b2 ("accel/ivpu: Add API for command queue create/destroy/submit")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250515094124.255141-1-jacek.lawrynowicz@linux.intel.com
Use FW names from linux-firmware repo instead of deprecated ones.
The vpu_37xx.bin style names were never released and were only used for
internal testing, so it is safe to remove them.
Fixes: c140244f0c ("accel/ivpu: Add initial Panther Lake support")
Cc: stable@vger.kernel.org # v6.13+
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250506092030.280276-1-jacek.lawrynowicz@linux.intel.com
- Fix missing alloc log when drm_gem_handle_create() fails in
drm_vma_node_allow() and open callback is not called
- Add ivpu_bo->ctx_id that enables to log the actual context
id instead of using 0 as default
- Add couple WARNs and errors so we can catch more memory
corruption issues
Fixes: 37dee2a2f4 ("accel/ivpu: Improve buffer object debug logs")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250506091303.262034-1-jacek.lawrynowicz@linux.intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgqSbkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGr6sH/1ICAvlin1GuxffE
ISVNz3xhXQpXG2k8yl9r0umpdCfPQbGrxm30vZyuIDNutY/FuMvkIqfu+Z1NnLg0
GidZW015LtXrp7/puKtTnUD5CPSjdETMXig+Q7c1PrxkkmHwz8sBbbm173AIDbDB
t7wwqSEUQh2AIDouGwN+DXB+6bR2FoOXb/k/njmtappIwR3rBc2f1HQJnP095rKO
5AKw1c9DMv5Wq2cEdBOCP48e4CFZEIN1ycW0nvtjpnOmcPOJjLoEothRbntQolqF
udtj5UeTGdAJqmjigv7KHmlrmFNe+GqBq4+beHl5MRxhBaT2uGGaM9jCJiSxT3Jx
sHyYYr8=
=Ddma
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc7' into x86/core, to pick up fixes
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use %ptTs instead of open-coded variant to print contents of time64_t type
in human readable form.
This changes N/A output to 1970-01-01 00:00:00 for zero timestamps,
but it's used only in the dev_err() output and won't break anything.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Yaron Avizrat <yaron.avizrat@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Link: https://lore.kernel.org/r/20250305110126.2134307-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Use the effective written size instead of original size as index for zero
termination. If the input from user-space is to larger and the input is
truncated, the original size is out-of-bound.
Since there is an upfront size check here, the change is for consistency.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250508130612.82270-3-markus.burri@mt.com
The following commit:
288a4ff0ad ("x86/msr: Move rdtsc{,_ordered}() to <asm/tsc.h>")
removed the <asm/msr.h> include from the accel/habanalabs driver, which broke
the build on UML:
drivers/accel/habanalabs/common/habanalabs_ioctl.c:326:23: error: call to undeclared function 'rdtsc'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
Make the driver depend on 'X86 && X86_64', instead of just 'X86_64',
thus it won't be built on UML.
Suggested-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Oded Gabbay <ogabbay@kernel.org>
Link: https://lore.kernel.org/r/202505080003.0t7ewxGp-lkp@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
The mutex unlock for vdev->submitted_jobs_lock was incorrectly placed
before unlocking file_priv->lock. Change order of unlocks to avoid potential
race conditions.
Fixes: 5bbccadaf3 ("accel/ivpu: Abort all jobs after command queue unregister")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250425093656.2228168-1-jacek.lawrynowicz@linux.intel.com
Increase JMS message state dump command timeout to 100 ms. On some
platforms, the FW may take a bit longer than 50 ms to dump its state
to the log buffer and we don't want to miss any debug info during TDR.
Fixes: 5e162f872d ("accel/ivpu: Add FW state dump on TDR")
Cc: stable@vger.kernel.org # v6.13+
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250425092822.2194465-1-jacek.lawrynowicz@linux.intel.com
None of the drivers implement anything here anymore, remove the dead code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20250418080130.1844424-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Correct setup of D0i2 disable which was
by mistake set up to value 1 and use BIT(1) instead.
Fixes: 011529fe81 ("accel/ivpu: Implement D0i2 disable test mode")
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250416102629.384626-1-maciej.falkowski@linux.intel.com
Fix improper use of dct_active_percent field in DCT interrupt handler
causing DCT to never get enabled. Set dct_active_percent internally before
IPC to ensure correct driver value even if IPC fails.
Set default DCT value to 30 accordingly to HW architecture specification.
Fixes: a19bffb10c ("accel/ivpu: Implement DCT handling")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250416102616.384577-1-maciej.falkowski@linux.intel.com
Introduce a heartbeat-based Timeout Detection and Recovery (TDR) mechanism.
The enhancement aims to improve the reliability of device hang detection by
monitoring heartbeat updates.
Each progressing inference will update heartbeat counter allowing driver to
monitor its progression. Limit maximum number of reschedules when heartbeat
indicates progression to 30. This increases the maximum running time of
single inference to about 60 seconds.
The heartbeat mechanism provides a more robust method for detecting device
hangs, potentially reducing false positive recoveries due to long running
inferences.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250416102555.384526-1-maciej.falkowski@linux.intel.com
It turns out that there are no platforms that have PCI but don't have an
MMU, so adding a Kconfig dependency on CONFIG_PCI simplifies build testing
kernels for those platforms a lot, and avoids a lot of inadvertent build
regressions.
Add a dependency for CONFIG_PCI and remove all the ones for PCI specific
device drivers that are currently marked not having it.
There are a few platforms that have an optional MMU, but they usually
cannot have PCI at all. The one exception is Coldfire MCF54xx, but this is
mainly for historic reasons, and anyone using those chips should really use
the MMU these days.
Link: https://lore.kernel.org/lkml/a41f1b20-a76c-43d8-8c36-f12744327a54@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20250423202215.3315550-1-arnd@kernel.org
drm-misc-next for v6.16-rc1:
UAPI Changes:
- Add ASAHI uapi header!
- Add apple fourcc modifiers.
- Add capset virtio definitions to UAPI.
- Extend EXPORT_SYNC_FILE for timeline syncobjs.
Cross-subsystem Changes:
- Adjust DMA-BUF sg handling to not cache map on attach.
- Update drm/ci, hlcdc, virtio, maintainers.
- Update fbdev todo.
- Allow setting dma-device for dma-buf import.
- Export efi_mem_desc_lookup to make efidrm build as a module.
Core Changes:
- Update drm scheduler docs.
- Use the correct resv object in TTM delayed destroy.
- Fix compiler warning with panic qr code, and other small fixes.
- drm/ci updates.
- Add debugfs file for listing all bridges.
- Small fixes to drm/client, ttm tests.
- Add documentation to display/hdmi.
- Add kunit tests for bridges.
- Dont fail managed device probing if connector polling fails.
- Create Kconfig.debug for drm core.
- Add tests for the drm scheduler.
- Add and use new access helpers for DPCPD.
- Add generic and optimized conversions for format-helper.
- Begin refcounting panel for improving lifetime handling.
- Unify simpledrm and ofdrm sysfb, and add extra features.
- Split hdmi audio in bridge to make DP audio work.
Driver Changes:
- Convert drivers to use devm_platform_ioremap_resource().
- Assorted small fixes to imx/legacy-bridg, gma500, pl111, nouveau, vc4,
vmwgfx, ast, mxsfb, xlnx, accel/qaic, v3d, bridge/imx8qxp-ldb, ofdrm,
bridge/fsl-ldb, udl, bridge/ti-sn65dsi86, bridge/anx7625, cirrus-qemu,
bridge/cdns-dsi, panel/sharp, panel/himax, bridge/sil902x, renesas,
imagination, various panels.
- Allow attaching more display to vkms.
- Add Powertip PH128800T004-ZZA01 panel.
- Add rotation quirk for ZOTAC panel.
- Convert bridge/tc358775 to atomic.
- Remove deprecated panel calls from synaptics, novatek, samsung panels.
- Refactor shmem helper page pinning and accel drivers using it.
- Add dmabuf support to accel/amdxdna.
- Use 4k page table format for panfrost/mediatek.
- Add common powerup/down dp link helper and use it.
- Assorted compiler warning fixes.
- Support dma-buf import for renesas
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# include/drm/drm_kunit_helpers.h
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/e147ff95-697b-4067-9e2e-7cbd424e162a@linux.intel.com
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The helper tests the dma_buf
itself while import_attach is just an artifact of the import. Prepares
to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250408115237.428985-1-tzimmermann@suse.de
Add tracking of command queue ID in JOB debug message to improve
debugging capabilities.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155939.4049467-1-maciej.falkowski@linux.intel.com
Add sysfs files that show maximum and current
frequency of the NPU's data processing unit.
New sysfs entries:
- npu_max_frequency_mhz
- npu_current_frequency_mhz
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155912.4049340-3-maciej.falkowski@linux.intel.com
Fix the frequency returned to the user space by
the DRM_IVPU_PARAM_CORE_CLOCK_RATE GET_PARAM IOCTL.
The kernel driver returned CPU frequency for MTL and bare
PLL frequency for LNL - this was inconsistent and incorrect
for both platforms. With this fix the driver returns maximum
frequency of the NPU data processing unit (DPU) for all HW
generations. This is what user space always expected.
Also do not set CPU frequency in boot params - the firmware
does not use frequency passed from the driver, it was only
used by the early pre-production firmware.
With that we can remove CPU frequency calculation code.
Show NPU frequency in FREQ_CHANGE interrupt when frequency
tracking is enabled.
Fixes: 8a27ad81f7 ("accel/ivpu: Split IP and buttress code")
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155912.4049340-2-maciej.falkowski@linux.intel.com
Update firmware Boot API to 3.28.3 version and
adjust driver to API changes for preemption buffers.
Use new preemption buffer size fields from FW header added to
firmware boot API for preemption buffers allocations,
if those new fields are zeroed, use old values instead.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155817.4049220-1-maciej.falkowski@linux.intel.com
Use flush_work() instead of cancel_work_sync() for driver IRQ
workqueues to guarantee that remaining pending work
will be handled.
This resolves two issues that were encountered where a driver was left
in an incorrect state as the bottom-half was canceled:
1. Cancelling context-abort of a job that is still executing and
is causing translation faults which is going to cause additional TDRs
2. Cancelling bottom-half of a DCT (duty-cycle throttling) request
which will cause a device to not be adjusted to an external frequency
request.
Fixes: bc3e5f48b7 ("accel/ivpu: Use workqueue for IRQ handling")
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155755.4049156-1-maciej.falkowski@linux.intel.com
When multiple ERT_START_NPU commands are combined in one buffer, the
buffer size calculation is incorrect. Also, the condition to make sure
the buffer size is not beyond 4K is also fixed.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250409210013.10854-1-lizhi.hou@amd.com
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The helper tests the dma_buf
itself while import_attach is just an artifact of the import. Prepares
to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250408113247.418007-1-tzimmermann@suse.de
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
reservation" from Sourabh Jain changes powerpc's kexec code to use more
of the generic layers.
- The 2 patch series "get_maintainer: report subsystem status
separately" from Vlastimil Babka makes some long-requested improvements
to the get_maintainer output.
- The 4 patch series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the ucount
code.
- The 12 patch series "reboot: support runtime configuration of
emergency hw_protection action" from Ahmad Fatoum improves the ability
for a driver to perform an emergency system shutdown or reboot.
- The 16 patch series "Converge on using secs_to_jiffies() part two"
from Easwar Hariharan performs further migrations from
msecs_to_jiffies() to secs_to_jiffies().
- The 7 patch series "lib/interval_tree: add some test cases and
cleanup" from Wei Yang permits more userspace testing of kernel library
code, adds some more tests and performs some cleanups.
- The 2 patch series "hung_task: Dump the blocking task stacktrace" from
Masami Hiramatsu arranges for the hung_task detector to dump the stack
of the blocking task and not just that of the blocked task.
- The 4 patch series "resource: Split and use DEFINE_RES*() macros" from
Andy Shevchenko provides some cleanups to the resource definition
macros.
- Plus the usual shower of singleton patches - please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA
jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq
r6khQUIcQImPPcjFqEFpuiSOU0MBZA0=
=Kii8
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
Prevent runtime resume/suspend while MS IOCTLs are in progress.
Failed suspend will call ivpu_ms_cleanup() that would try to acquire
file_priv->ms_lock, which is already held by the IOCTLs.
Fixes: cdfad4db77 ("accel/ivpu: Add NPU profiling support")
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250325114306.3740022-3-maciej.falkowski@linux.intel.com
Fix deadlock in ivpu_ms_cleanup() by preventing runtime resume after
file_priv->ms_lock is acquired.
During a failure in runtime resume, a cold boot is executed, which
calls ivpu_ms_cleanup_all(). This function calls ivpu_ms_cleanup()
that acquires file_priv->ms_lock and causes the deadlock.
Fixes: cdfad4db77 ("accel/ivpu: Add NPU profiling support")
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250325114306.3740022-2-maciej.falkowski@linux.intel.com
Warn if device is suspended only when runtime PM is enabled.
Runtime PM is disabled during reset/recovery and it is not an error
to use ivpu_ipc_send_receive_internal() in such cases.
Fixes: 5eaa497411 ("accel/ivpu: Prevent recovery invocation during probe and resume")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250325114219.3739951-1-maciej.falkowski@linux.intel.com
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do
firmware updates in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs
-----BEGIN PGP SIGNATURE-----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=oK/N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
Add amdxdna_gem_prime_export() and amdxdna_gem_prime_import() for BO
import and export. Register mmu notifier for imported BO as well. When
MMU_NOTIFIER_UNMAP event is received, queue work to remove the notifier.
The same BO could be mapped multiple times if it is exported and imported
by an application. Use a link list to track VMAs the BO been mapped.
v2: Rebased and call get_dma_buf() before dma_buf_attach()
v3: Removed import_attach usage
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250325200105.2744079-1-lizhi.hou@amd.com
Commit 954907f714 ("drm/shmem-helper: Refactor locked/unlocked
functions") suffixed drm_gem_shmem_v[un]map with _locked to reflect
the fact these functions must be called with the GEM resv lock held,
but accel drivers were left behind.
Fixes: 954907f714 ("drm/shmem-helper: Refactor locked/unlocked functions")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Cc: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250327104300.1982058-2-boris.brezillon@collabora.com
Commit 051b6646d3 ("drm/shmem-helper: Use refcount_t for
pages_use_count") changed the type of
drm_gem_shmem_object::pages_use_count but accel drivers were left
behind.
Fixes: 051b6646d3 ("drm/shmem-helper: Use refcount_t for pages_use_count")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Cc: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250327104300.1982058-1-boris.brezillon@collabora.com
fixes for quaic, and a iommu handling fix for host1x.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZ9vQmQAKCRAnX84Zoj2+
dko4AYCgVyPAFmpEhmX7gmFC7fGwNM0uephsy2+0uy1GnmLfc+uT+0cJw6iROg9a
JOq+5YwBegJ9hwV6Dc/iDk1xTYDeYdw3ctZ7PSAPkBP9uMtN5+X3trTg2Qh9sM1J
f004QiANIw==
=eG/z
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2025-03-20' of ssh://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A sched fence reference leak fix, two fence fixes for v3d, two overflow
fixes for quaic, and a iommu handling fix for host1x.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250320-valiant-outstanding-nightingale-e9acae@houat
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-3-a43967e36c88@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Dongsheng Yang <dongsheng.yang@easystack.cn>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <frank.li@nxp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312073404.1429992-1-nichen@iscas.ac.cn
When slicing a BO, we need to iterate through the BO's sgt to find the
right pieces to construct the slice. Some of the data types chosen for
this process are incorrectly too small, and can overflow. This can
result in the incorrect slice construction, which can lead to data
corruption in workload execution.
The device can only handle 32-bit sized transfers, and the scatterlist
struct only supports 32-bit buffer sizes, so our upper limit for an
individual transfer is an unsigned int. Using an int is incorrect due to
the reservation of the sign bit. Upgrade the length of a scatterlist
entry and the offsets into a scatterlist entry to unsigned int for a
correct representation.
While each transfer may be limited to 32-bits, the overall BO may exceed
that size. For counting the total length of the BO, we need a type that
can represent the largest allocation possible on the system. That is the
definition of size_t, so use it.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Reviewed-by: Youssef Samir <quic_yabdulra@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306171959.853466-1-jeff.hugo@oss.qualcomm.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmfOKBUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1aQH/iC+Oyij4VxAjBek
BOXIT/p6CwlIXb8ObiWWcRjDPizlcxb3RaV8J2RO+IqaQ2wltxpFANq2G7Re2FPm
SNcEpIURAOVcxHGedcfFA91srO5F4FzNTO8LVp7MIbcgMYy3pdk+dbZmi6A691R+
t9pb74m+MAnF1o/MUx7pUlhAT/4ymuuR0F7WCSg4h0Xwe5m0nlJY89kJBC7PCjyd
n3mdhsz3rDSLmt/z/T7HGD89r8sYSvm9cOKtL3ELgGTrm7boQV8ii9Y9w04DI8PQ
JmIernugcCxmhH36mVUAHgJf2+/T388xFUh/D5+skeUOUZpaJZG866rnb32WpsHc
eWLFUeg=
=Wypt
-----END PGP SIGNATURE-----
Merge 6.14-rc6 into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a timeout failure been found during stress tests. If the firmware
generates a mailbox response right after driver clears the mailbox channel
interrupt register, the hardware will not generate an interrupt for the
response. This causes the unexpected mailbox command timeout.
To handle this failure, driver checks the interrupt register before
exiting mailbox_rx_worker(). If there is a new response, driver goes back
to process it.
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226161810.4188334-1-lizhi.hou@amd.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into drm-next
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next
can base on rc4.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-habanalabs-v1-1-b35463197efb@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix and config fix in nouveau, a dmem cgroup descendant pool handling
fix, and a missing header for amdxdna.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZ7bn6AAKCRAnX84Zoj2+
djJnAX9XDHzW0CCJnF8UopQearYcn2DPKrXvLKWwwpSothyoOFiIHyifP7fHlQBX
XA5+iIQBf1RZq3uTeqbaq3DeD0Pf9LrRUC41g3H7HO9Lt0/Bp2dnRqJJgZVxIg+h
57yAKxQ5Cw==
=PwGs
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2025-02-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
An reset signal polarity fix for the jd9365da-h3 panel, a folio handling
fix and config fix in nouveau, a dmem cgroup descendant pool handling
fix, and a missing header for amdxdna.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220-glorious-cockle-of-might-5b35f7@houat
When compiling without CONFIG_IA32_EMULATION, there can be some errors:
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘mailbox_release_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:197:2: error: implicit declaration
of function ‘kfree’.
197 | kfree(mb_msg);
| ^~~~~
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘xdna_mailbox_send_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:418:11: error:implicit declaration
of function ‘kzalloc’.
418 | mb_msg = kzalloc(sizeof(*mb_msg) + pkg_size, GFP_KERNEL);
| ^~~~~~~
Add the missing include.
Fixes: b87f920b93 ("accel/amdxdna: Support hardware mailbox")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211015354.3388171-1-suhui@nfschina.com
It is required by firmware to wait up to 2 seconds for pending commands
before sending the destroy hardware context command. After 2 seconds
wait, if there are still pending commands, driver needs to cancel them.
So the context destroy steps need to be:
1. Stop drm scheduler. (drm_sched_entity_destroy)
2. Wait up to 2 seconds for pending commands.
3. Destroy hardware context and cancel the rest pending requests.
4. Wait all jobs associated with the hwctx are freed.
5. Free job resources.
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124173536.148676-1-lizhi.hou@amd.com
