mirror of
https://github.com/torvalds/linux.git
synced 2026-05-24 23:22:31 +02:00
master
180 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Breno Leitao
|
5cbb61bf41 |
arm64/fpsimd: ptrace: zero target's fpsimd_state, not the tracer's
sve_set_common() is the backend for PTRACE_SETREGSET(NT_ARM_SVE) and
PTRACE_SETREGSET(NT_ARM_SSVE). Every write in the function operates on
the tracee (target) - except a single memset that uses current instead,
zeroing the tracer's saved V0-V31 / FPSR / FPCR shadow on every ptrace
SETREGSET call.
The memset is meant to give the tracee a defined zero register image
before the user-supplied payload is copied in (for partial writes,
header-only writes, and FPSIMD<->SVE format switches). Aiming it at
current both denies the tracee that clean slate and silently corrupts
the tracer.
The corruption of the tracer's saved FPSIMD state is not always
observable. Where the tracer's state is live on a CPU, this may be
reused without loading the corrupted state from memory, and will
eventually be written back over the corrupted state. Where the tracer's
state is saved in SVE_PT_REGS_SVE format, only the FPSR and FPCR are
clobbered, and the effective copy of the vectors is in the task's
sve_state.
Reproducible on an arm64 kernel with SVE: a single-threaded tracer that
loads a known pattern into V0-V31, issues PTRACE_SETREGSET(NT_ARM_SVE)
on a child, and reads V0-V31 back observes them all zeroed within tens
of thousands of iterations when a sibling thread keeps stealing the
FPSIMD CPU binding.
Fixes:
|
||
|
Linus Torvalds
|
45bf4bc87c |
arm64 updates for 7.0
ACPI:
- Add interrupt signalling support to the AGDI handler.
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry.
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime).
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V).
- Reduce MTE overhead when executing in the kernel on Ampere CPUs.
- Ensure POR_EL0 value exposed via ptrace is up-to-date.
- Fix error handling on GCS allocation failure.
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver.
Entry code:
- Minor optimisations and cleanups to the syscall entry path.
- Preparatory rework for moving to the generic syscall entry code.
Hardware errata:
- Work around Spectre-BHB on TSV110 processors.
- Work around broken CMO propagation on some systems with the SI-L1
interconnect.
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with noinstr.
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression).
- Fix custom __READ_ONCE() implementation for LTO builds when operating
on non-atomic types.
Perf and PMUs:
- Support for CMN-600AE.
- Be stricter about supported hardware in the CMN driver.
- Support for DSU-110 and DSU-120.
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter).
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver.
- Use !bitmap_empty() as a faster alternative to bitmap_weight().
- Fix SPE error handling when failing to resume profiling.
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests.
- Avoid nolibc-specific my_syscall() function.
- Add basic test for the LS64 HWCAP.
- Extend fp-pidbench to cover additional workload patterns.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmmJ16QQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFO0CACxYy5klTAdqB+RjhxSbibZ6mmch/mX3zLl
qBp0HeKuwSv+EWEblmr6KMrr/S5YjtEMboOC7GnmEdSeM6hucu5gPiEb7bIDQfbB
5KJXoUlN1C+7Na4CimfordWiHIZw2d7mTumJcnsqMo7XN83t+4yqs98sET7WRCy5
WUyqHH/dGZsGcsBMrRRO3UriHCpU425GE0jopF5OkwCs4dwyUVIV8SmZtK4Ovi3u
Kin75UYgeVum8A218oHosTfYTBt4p/cSdfVVv5f3P14Q7lIstyJR7ZDqepTP2XSJ
95W3nuMfOT1lx7f6pqvHc+4Ccl/+DQnbW1PWwv8f3nXAKVVMafWf
=3SfC
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a little less than normal, probably due to LPC & Christmas/New
Year meaning that a few series weren't quite ready or reviewed in
time. It's still useful across the board, despite the only real
feature being support for the LS64 feature enabling 64-byte atomic
accesses to endpoints that support it.
ACPI:
- Add interrupt signalling support to the AGDI handler
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime)
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V)
- Reduce MTE overhead when executing in the kernel on Ampere CPUs
- Ensure POR_EL0 value exposed via ptrace is up-to-date
- Fix error handling on GCS allocation failure
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver
Entry code:
- Minor optimisations and cleanups to the syscall entry path
- Preparatory rework for moving to the generic syscall entry code
Hardware errata:
- Work around Spectre-BHB on TSV110 processors
- Work around broken CMO propagation on some systems with the SI-L1
interconnect
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with
noinstr
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression)
- Fix custom __READ_ONCE() implementation for LTO builds when
operating on non-atomic types
Perf and PMUs:
- Support for CMN-600AE
- Be stricter about supported hardware in the CMN driver
- Support for DSU-110 and DSU-120
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter)
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver
- Use !bitmap_empty() as a faster alternative to bitmap_weight()
- Fix SPE error handling when failing to resume profiling
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests
- Avoid nolibc-specific my_syscall() function
- Add basic test for the LS64 HWCAP
- Extend fp-pidbench to cover additional workload patterns"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (43 commits)
perf/arm-cmn: Reject unsupported hardware configurations
perf: arm_spe: Properly set hw.state on failures
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
arm64: Fix non-atomic __READ_ONCE() with CONFIG_LTO=y
arm64: poe: fix stale POR_EL0 values for ptrace
kselftest/arm64: Raise default number of loops in fp-pidbench
kselftest/arm64: Add a no-SVE loop after SVE in fp-pidbench
perf/cxlpmu: Replace IRQF_ONESHOT with IRQF_NO_THREAD
arm64: mte: Set TCMA1 whenever MTE is present in the kernel
arm64/ptrace: Return early for ptrace_report_syscall_entry() error
arm64/ptrace: Split report_syscall()
arm64: Remove unused _TIF_WORK_MASK
kselftest/arm64: Add missing file in .gitignore
arm64: errata: Workaround for SI L1 downstream coherency issue
kselftest/arm64: Add HWCAP test for FEAT_LS64
arm64: Add support for FEAT_{LS64, LS64_V}
KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest
arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1
KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory
KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B
...
|
||
|
Will Deacon
|
3aa99d74c8 |
Merge branch 'for-next/entry' into for-next/core
* for-next/entry: arm64/ptrace: Return early for ptrace_report_syscall_entry() error arm64/ptrace: Split report_syscall() arm64: Remove unused _TIF_WORK_MASK arm64: Avoid memcpy() for syscall_get_arguments() syscall.h: Remove unused SYSCALL_MAX_ARGS |
||
|
Joey Gouly
|
1f3b950492 |
arm64: poe: fix stale POR_EL0 values for ptrace
If a process wrote to POR_EL0 and then crashed before a context switch
happened, the coredump would contain an incorrect value for POR_EL0.
The value read in poe_get() would be a stale value left in thread.por_el0. Fix
this by reading the value from the system register, if the target thread is the
current thread.
This matches what gcs/fpsimd do.
Fixes:
|
||
|
Jinjie Ruan
|
a338630166 |
arm64/ptrace: Return early for ptrace_report_syscall_entry() error
The generic entry abort the syscall_trace_enter() sequence if ptrace_report_syscall_entry() errors out, but arm64 not. When ptrace requests interception, it should prevent all subsequent system-call processing, including audit and seccomp. In preparation for moving arm64 over to the generic entry code, return early if ptrace_report_syscall_entry() encounters an error. Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Jinjie Ruan
|
741a900017 |
arm64/ptrace: Split report_syscall()
The generic syscall entry code has the form:
| syscall_trace_enter()
| {
| ptrace_report_syscall_entry()
| }
|
| syscall_exit_work()
| {
| ptrace_report_syscall_exit()
| }
In preparation for moving arm64 over to the generic entry code, split
report_syscall() to two separate enter and exit functions to align
the structure of the arm64 code with syscall_trace_enter() and
syscall_exit_work() from the generic entry code.
No functional changes.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
||
|
Mark Rutland
|
128a7494a9 |
arm64/fpsimd: ptrace: Fix SVE writes on !SME systems
When SVE is supported but SME is not supported, a ptrace write to the NT_ARM_SVE regset can place the tracee into an invalid state where (non-streaming) SVE register data is stored in FP_STATE_SVE format but TIF_SVE is clear. This can result in a later warning from fpsimd_restore_current_state(), e.g. WARNING: CPU: 0 PID: 7214 at arch/arm64/kernel/fpsimd.c:383 fpsimd_restore_current_state+0x50c/0x748 When this happens, fpsimd_restore_current_state() will set TIF_SVE, placing the task into the correct state. This occurs before any other check of TIF_SVE can possibly occur, as other checks of TIF_SVE only happen while the FPSIMD/SVE/SME state is live. Thus, aside from the warning, there is no functional issue. This bug was introduced during rework to error handling in commit: |
||
|
Mark Brown
|
472800cd5e |
arm64/sme: Support disabling streaming mode via ptrace on SME only systems
Currently it is not possible to disable streaming mode via ptrace on SME only systems, the interface for doing this is to write via NT_ARM_SVE but such writes will be rejected on a system without SVE support. Enable this functionality by allowing userspace to write SVE_PT_REGS_FPSIMD format data via NT_ARM_SVE with the vector length set to 0 on SME only systems. Such writes currently error since we require that a vector length is specified which should minimise the risk that existing software is relying on current behaviour. Reads are not supported since I am not aware of any use case for this and there is some risk that an existing userspace application may be confused if it reads NT_ARM_SVE on a system without SVE. Existing kernels will return FPSIMD formatted register state from NT_ARM_SVE if full SVE state is not stored, for example if the task has not used SVE. Returning a vector length of 0 would create a risk that software would try to do things like allocate space for register state with zero sizes, while returning a vector length of 128 bits would look like SVE is supported. It seems safer to just not make the changes to add read support. It remains possible for userspace to detect a SME only system via the ptrace interface only since reads of NT_ARM_SSVE and NT_ARM_ZA will succeed while reads of NT_ARM_SVE will fail. Read/write access to the FPSIMD registers in non-streaming mode is available via REGSET_FPR. sve_set_common() already avoids allocating SVE storage when doing a FPSIMD formatted write and allocating SME storage when doing a NT_ARM_SVE write so we change the function to validate the new case and skip setting a vector length for it. The aim is to make a minimally invasive change, no operation that would previously have succeeded will be affected, and we use a previously defined interface in new circumstances rather than define completely new ABI. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: David Spickett <david.spickett@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Linus Torvalds
|
d900c4ce63 |
execve updates for v6.17
- Introduce regular REGSET note macros arch-wide (Dave Martin) - Remove arbitrary 4K limitation of program header size (Yin Fengwei) - Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIVKiAAKCRA2KwveOeQk u4zBAP4zUNj2+XyixVPXCzv+Hkle6zWs7yrzdA2yLxe8Qtwj5AD+N2I6MUGcCFGW W+uWxlWTtGLDqh1CplIUqTlxMi39Og4= =vYnE -----END PGP SIGNATURE----- Merge tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - Introduce regular REGSET note macros arch-wide (Dave Martin) - Remove arbitrary 4K limitation of program header size (Yin Fengwei) - Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi) * tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits) fork: reorder function qualifiers for copy_clone_args_from_user binfmt_elf: remove the 4k limitation of program header size binfmt_elf: Warn on missing or suspicious regset note names xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names ... |
||
|
Dave Martin
|
87b0d081dc |
arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
Instead of having the core code guess the note name for each regset, use USER_REGSET_NOTE_TYPE() to pick the correct name from elf.h. This does not affect the correctness of switch(note_type) and similar code, since note type values known to Linux for coredump purposes were already required to be unique. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <kees@kernel.org> Cc: Akihiko Odaki <akihiko.odaki@daynix.com> Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp> Link: https://lore.kernel.org/r/20250701135616.29630-7-Dave.Martin@arm.com Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Tengda Wu
|
39dfc971e4 |
arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
KASAN reports a stack-out-of-bounds read in regs_get_kernel_stack_nth(). Call Trace: [ 97.283505] BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.284677] Read of size 8 at addr ffff800089277c10 by task 1.sh/2550 [ 97.285732] [ 97.286067] CPU: 7 PID: 2550 Comm: 1.sh Not tainted 6.6.0+ #11 [ 97.287032] Hardware name: linux,dummy-virt (DT) [ 97.287815] Call trace: [ 97.288279] dump_backtrace+0xa0/0x128 [ 97.288946] show_stack+0x20/0x38 [ 97.289551] dump_stack_lvl+0x78/0xc8 [ 97.290203] print_address_description.constprop.0+0x84/0x3c8 [ 97.291159] print_report+0xb0/0x280 [ 97.291792] kasan_report+0x84/0xd0 [ 97.292421] __asan_load8+0x9c/0xc0 [ 97.293042] regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.293835] process_fetch_insn+0x770/0xa30 [ 97.294562] kprobe_trace_func+0x254/0x3b0 [ 97.295271] kprobe_dispatcher+0x98/0xe0 [ 97.295955] kprobe_breakpoint_handler+0x1b0/0x210 [ 97.296774] call_break_hook+0xc4/0x100 [ 97.297451] brk_handler+0x24/0x78 [ 97.298073] do_debug_exception+0xac/0x178 [ 97.298785] el1_dbg+0x70/0x90 [ 97.299344] el1h_64_sync_handler+0xcc/0xe8 [ 97.300066] el1h_64_sync+0x78/0x80 [ 97.300699] kernel_clone+0x0/0x500 [ 97.301331] __arm64_sys_clone+0x70/0x90 [ 97.302084] invoke_syscall+0x68/0x198 [ 97.302746] el0_svc_common.constprop.0+0x11c/0x150 [ 97.303569] do_el0_svc+0x38/0x50 [ 97.304164] el0_svc+0x44/0x1d8 [ 97.304749] el0t_64_sync_handler+0x100/0x130 [ 97.305500] el0t_64_sync+0x188/0x190 [ 97.306151] [ 97.306475] The buggy address belongs to stack of task 1.sh/2550 [ 97.307461] and is located at offset 0 in frame: [ 97.308257] __se_sys_clone+0x0/0x138 [ 97.308910] [ 97.309241] This frame has 1 object: [ 97.309873] [48, 184) 'args' [ 97.309876] [ 97.310749] The buggy address belongs to the virtual mapping at [ 97.310749] [ffff800089270000, ffff800089279000) created by: [ 97.310749] dup_task_struct+0xc0/0x2e8 [ 97.313347] [ 97.313674] The buggy address belongs to the physical page: [ 97.314604] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14f69a [ 97.315885] flags: 0x15ffffe00000000(node=1|zone=2|lastcpupid=0xfffff) [ 97.316957] raw: 015ffffe00000000 0000000000000000 dead000000000122 0000000000000000 [ 97.318207] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 97.319445] page dumped because: kasan: bad access detected [ 97.320371] [ 97.320694] Memory state around the buggy address: [ 97.321511] ffff800089277b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.322681] ffff800089277b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.323846] >ffff800089277c00: 00 00 f1 f1 f1 f1 f1 f1 00 00 00 00 00 00 00 00 [ 97.325023] ^ [ 97.325683] ffff800089277c80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3 [ 97.326856] ffff800089277d00: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 This issue seems to be related to the behavior of some gcc compilers and was also fixed on the s390 architecture before: commit |
||
|
Mark Rutland
|
9f8bf718f2 |
arm64/fpsimd: ptrace: Gracefully handle errors
Within sve_set_common() we do not handle error conditions correctly: * When writing to NT_ARM_SSVE, if sme_alloc() fails, the task will be left with task->thread.sme_state==NULL, but TIF_SME will be set and task->thread.fp_type==FP_STATE_SVE. This will result in a subsequent null pointer dereference when the task's state is loaded or otherwise manipulated. * When writing to NT_ARM_SSVE, if sve_alloc() fails, the task will be left with task->thread.sve_state==NULL, but TIF_SME will be set, PSTATE.SM will be set, and task->thread.fp_type==FP_STATE_FPSIMD. This is not a legitimate state, and can result in various problems, including a subsequent null pointer dereference and/or the task inheriting stale streaming mode register state the next time its state is loaded into hardware. * When writing to NT_ARM_SSVE, if the VL is changed but the resulting VL differs from that in the header, the task will be left with TIF_SME set, PSTATE.SM set, but task->thread.fp_type==FP_STATE_FPSIMD. This is not a legitimate state, and can result in various problems as described above. Avoid these problems by allocating memory earlier, and by changing the task's saved fp_type to FP_STATE_SVE before skipping register writes due to a change of VL. To make early returns simpler, I've moved the call to fpsimd_flush_task_state() earlier. As the tracee's state has already been saved, and the tracee is known to be blocked for the duration of sve_set_common(), it doesn't matter whether this is called at the start or the end. For consistency I've moved the setting of TIF_SVE earlier. This will be cleared when loading FPSIMD-only state, and so moving this has no resulting functional change. Note that we only allocate the memory for SVE state when SVE register contents are provided, avoiding unnecessary memory allocations for tasks which only use FPSIMD. Fixes: |
||
|
Mark Rutland
|
f916dd32a9 |
arm64/fpsimd: ptrace: Mandate SVE payload for streaming-mode state
When a task has PSTATE.SM==1, reads of NT_ARM_SSVE are required to
always present a header with SVE_PT_REGS_SVE, and register data in SVE
format. Reads of NT_ARM_SSVE must never present register data in FPSIMD
format. Within the kernel, we always expect streaming SVE data to be
stored in SVE format.
Currently a user can write to NT_ARM_SSVE with a header presenting
SVE_PT_REGS_FPSIMD rather than SVE_PT_REGS_SVE, placing the task's
FPSIMD/SVE data into an invalid state.
To fix this we can either:
(a) Forbid such writes.
(b) Accept such writes, and immediately convert data into SVE format.
Take the simple option and forbid such writes.
Fixes:
|
||
|
Mark Rutland
|
b93e685ecf |
arm64/fpsimd: ptrace: Do not present register data for inactive mode
The SME ptrace ABI is written around the incorrect assumption that SVE_PT_REGS_FPSIMD and SVE_PT_REGS_SVE are independent bit flags, where it is possible for both to be clear. In reality they are different values for bit 0 of the header flags, where SVE_PT_REGS_FPSIMD is 0 and SVE_PT_REGS_SVE is 1. In cases where code was written expecting that neither bit flag would be set, the value is equivalent to SVE_PT_REGS_FPSIMD. One consequence of this is that reads of the NT_ARM_SVE or NT_ARM_SSVE will erroneously present data from the other mode: * When PSTATE.SM==1, reads of NT_ARM_SVE will present a header with SVE_PT_REGS_FPSIMD, and FPSIMD-formatted data from streaming mode. * When PSTATE.SM==0, reads of NT_ARM_SSVE will present a header with SVE_PT_REGS_FPSIMD, and FPSIMD-formatted data from non-streaming mode. The original intent was that no register data would be provided in these cases, as described in commit: |
||
|
Mark Rutland
|
054d627c55 |
arm64/fpsimd: ptrace: Save task state before generating SVE header
As sve_init_header_from_task() consumes the saved value of PSTATE.SM and the saved fp_type, both must be saved before the header is generated. When generating a coredump for the current task, sve_get_common() calls sve_init_header_from_task() before saving the task's state. Consequently the header may be bogus, and the contents of the regset may be misleading. Fix this by saving the task's state before generting the header. Fixes: |
||
|
Mark Rutland
|
b255be4269 |
arm64/fpsimd: Clarify sve_sync_*() functions
The sve_sync_{to,from}_fpsimd*() functions are intended to
extract/insert the currently effective FPSIMD state of a task regardless
of whether the task's state is saved in FPSIMD format or SVE format.
Historically they were only used by ptrace, but sve_sync_to_fpsimd() is
now used more widely, and sve_sync_from_fpsimd_zeropad() may be used
more widely in future.
When FPSIMD/SVE state tracking was changed across commits:
|
||
|
Mark Rutland
|
316283f276 |
arm64/fpsimd: ptrace: Consistently handle partial writes to NT_ARM_(S)SVE
Partial writes to the NT_ARM_SVE and NT_ARM_SSVE regsets using an payload are handled inconsistently and non-deterministically. A comment within sve_set_common() indicates that we intended that a partial write would preserve any effective FPSIMD/SVE state which was not overwritten, but this has never worked consistently, and during syscalls the FPSIMD vector state may be non-deterministically preserved and may be erroneously migrated between streaming and non-streaming SVE modes. The simplest fix is to handle a partial write by consistently zeroing the remaining state. As detailed below I do not believe this will adversely affect any real usage. Neither GDB nor LLDB attempt partial writes to these regsets, and the documentation (in Documentation/arch/arm64/sve.rst) has always indicated that state preservation was not guaranteed, as is says: | The effect of writing a partial, incomplete payload is unspecified. When the logic was originally introduced in commit: |
||
|
Mark Rutland
|
d60624f72d |
arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS
Currently gcs_set() doesn't initialize the temporary 'user_gcs'
variable, and a SETREGSET call with a length of 0, 8, or 16 will leave
some portion of this uninitialized. Consequently some arbitrary
uninitialized values may be written back to the relevant fields in task
struct, potentially leaking up to 192 bits of memory from the kernel
stack. The read is limited to a specific slot on the stack, and the
issue does not provide a write mechanism.
As gcs_set() rejects cases where user_gcs::features_enabled has bits set
other than PR_SHADOW_STACK_SUPPORTED_STATUS_MASK, a SETREGSET call with
a length of zero will randomly succeed or fail depending on the value of
the uninitialized value, it isn't possible to leak the full 192 bits.
With a length of 8 or 16, user_gcs::features_enabled can be initialized
to an accepted value, making it practical to leak 128 or 64 bits.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length or partial write, the
existing contents of the fields which are not written to will be
retained.
To ensure that the extraction and insertion of fields is consistent
across the GETREGSET and SETREGSET calls, new task_gcs_to_user() and
task_gcs_from_user() helpers are added, matching the style of
pac_address_keys_to_user() and pac_address_keys_from_user().
Before this patch:
| # ./gcs-test
| Attempting to write NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x0000000000000000,
| .gcspr_el0 = 0x900d900d900d900d,
| }
| SETREGSET(nt=0x410, len=24) wrote 24 bytes
|
| Attempting to read NT_ARM_GCS::user_gcs
| GETREGSET(nt=0x410, len=24) read 24 bytes
| Read NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x0000000000000000,
| .gcspr_el0 = 0x900d900d900d900d,
| }
|
| Attempting partial write NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x1de7ec7edbadc0de,
| .gcspr_el0 = 0x1de7ec7edbadc0de,
| }
| SETREGSET(nt=0x410, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_GCS::user_gcs
| GETREGSET(nt=0x410, len=24) read 24 bytes
| Read NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x000000000093e780,
| .gcspr_el0 = 0xffff800083a63d50,
| }
After this patch:
| # ./gcs-test
| Attempting to write NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x0000000000000000,
| .gcspr_el0 = 0x900d900d900d900d,
| }
| SETREGSET(nt=0x410, len=24) wrote 24 bytes
|
| Attempting to read NT_ARM_GCS::user_gcs
| GETREGSET(nt=0x410, len=24) read 24 bytes
| Read NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x0000000000000000,
| .gcspr_el0 = 0x900d900d900d900d,
| }
|
| Attempting partial write NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x1de7ec7edbadc0de,
| .gcspr_el0 = 0x1de7ec7edbadc0de,
| }
| SETREGSET(nt=0x410, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_GCS::user_gcs
| GETREGSET(nt=0x410, len=24) read 24 bytes
| Read NT_ARM_GCS::user_gcs = {
| .features_enabled = 0x0000000000000000,
| .features_locked = 0x0000000000000000,
| .gcspr_el0 = 0x900d900d900d900d,
| }
Fixes:
|
||
|
Mark Rutland
|
594bfc4947 |
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
Currently poe_set() doesn't initialize the temporary 'ctrl' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.por_el0, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of POR_EL1 will be retained.
Before this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0xffff8000839c3d50
After this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
Fixes:
|
||
|
Mark Rutland
|
f5d7129184 |
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of FPMR will be retained.
Before this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0xffff800083963d50
After this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
Fixes:
|
||
|
Mark Rutland
|
ca62d90085 |
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl'
variable, and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently tagged_addr_ctrl_set() will consume an
arbitrary value, potentially leaking up to 64 bits of memory from the
kernel stack. The read is limited to a specific slot on the stack, and
the issue does not provide a write mechanism.
As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and
rejects other values, a partial SETREGSET attempt will randomly succeed
or fail depending on the value of the uninitialized value, and the
exposure is significantly limited.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
value of the tagged address ctrl will be retained.
The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the
user_aarch64_view used by a native AArch64 task to manipulate another
native AArch64 task. As get_tagged_addr_ctrl() only returns an error
value when called for a compat task, tagged_addr_ctrl_get() and
tagged_addr_ctrl_set() should never observe an error value from
get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that
such an error would be unexpected, and error handlnig is not missing in
either case.
Fixes:
|
||
|
Catalin Marinas
|
5a4332062e |
Merge branches 'for-next/gcs', 'for-next/probes', 'for-next/asm-offsets', 'for-next/tlb', 'for-next/misc', 'for-next/mte', 'for-next/sysreg', 'for-next/stacktrace', 'for-next/hwcap3', 'for-next/kselftest', 'for-next/crc32', 'for-next/guest-cca', 'for-next/haft' and 'for-next/scs', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
|
||
|
Mark Brown
|
c0139f6cbb |
arm64/ptrace: Clarify documentation of VL configuration via ptrace
When we configure SVE, SSVE or ZA via ptrace we allow the user to configure the vector length and specify any of the flags that are accepted when configuring via prctl(). This includes the S[VM]E_SET_VL_ONEXEC flag which defers the configuration of the VL until an exec(). We don't do anything to limit the provision of register data as part of configuring the _ONEXEC VL but as a function of the VL enumeration support we do this will be interpreted using the vector length currently configured for the process. This is all a bit surprising, and probably we should just not have allowed register data to be specified with _ONEXEC, but it's our ABI so let's add some explicit documentation in both the ABI documents and the source calling out what happens. The comments are also missing the fact that since SME does not have a mandatory 128 bit VL it is possible for VL enumeration to result in the configuration of a higher VL than was requested, cover that too. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241106-arm64-sve-ptrace-vl-set-v1-1-3b164e8b559c@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
7ec3b57cb2 |
arm64/ptrace: Expose GCS via ptrace and core files
Provide a new register type NT_ARM_GCS reporting the current GCS mode and pointer for EL0. Due to the interactions with allocation and deallocation of Guarded Control Stacks we do not permit any changes to the GCS mode via ptrace, only GCSPR_EL0 may be changed. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-27-222b78d87eee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Joey Gouly
|
1751981992 |
arm64/ptrace: add support for FEAT_POE
Add a regset for POE containing POR_EL0. Signed-off-by: Joey Gouly <joey.gouly@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20240822151113.1479789-21-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Mark Brown
|
b017a0cea6 |
arm64/ptrace: Use saved floating point state type to determine SVE layout
The SVE register sets have two different formats, one of which is a wrapped
version of the standard FPSIMD register set and another with actual SVE
register data. At present we check TIF_SVE to see if full SVE register
state should be provided when reading the SVE regset but if we were in a
syscall we may have saved only floating point registers even though that is
set.
Fix this and simplify the logic by checking and using the format which we
recorded when deciding if we should use FPSIMD or SVE format.
Fixes:
|
||
|
Linus Torvalds
|
6d75c6f40a |
arm64 updates for 6.9:
* Reorganise the arm64 kernel VA space and add support for LPA2 (at
stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address range
with 4KB and 16KB pages
* Enable Rust on arm64
* Support for the 2023 dpISA extensions (data processing ISA), host only
* arm64 perf updates:
- StarFive's StarLink (integrates one or more CPU cores with a shared
L3 memory system) PMU support
- Enable HiSilicon Erratum 162700402 quirk for HIP09
- Several updates for the HiSilicon PCIe PMU driver
- Arm CoreSight PMU support
- Convert all drivers under drivers/perf/ to use .remove_new()
* Miscellaneous:
- Don't enable workarounds for "rare" errata by default
- Clean up the DAIF flags handling for EL0 returns (in preparation for
NMI support)
- Kselftest update for ptrace()
- Update some of the sysreg field definitions
- Slight improvement in the code generation for inline asm I/O
accessors to permit offset addressing
- kretprobes: acquire regs via a BRK exception (previously done via a
trampoline handler)
- SVE/SME cleanups, comment updates
- Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously disabled
due to gcc silently ignoring -falign-functions=N)
-----BEGIN PGP SIGNATURE-----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=KTD/
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The major features are support for LPA2 (52-bit VA/PA with 4K and 16K
pages), the dpISA extension and Rust enabled on arm64. The changes are
mostly contained within the usual arch/arm64/, drivers/perf, the arm64
Documentation and kselftests. The exception is the Rust support which
touches some generic build files.
Summary:
- Reorganise the arm64 kernel VA space and add support for LPA2 (at
stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address
range with 4KB and 16KB pages
- Enable Rust on arm64
- Support for the 2023 dpISA extensions (data processing ISA), host
only
- arm64 perf updates:
- StarFive's StarLink (integrates one or more CPU cores with a
shared L3 memory system) PMU support
- Enable HiSilicon Erratum 162700402 quirk for HIP09
- Several updates for the HiSilicon PCIe PMU driver
- Arm CoreSight PMU support
- Convert all drivers under drivers/perf/ to use .remove_new()
- Miscellaneous:
- Don't enable workarounds for "rare" errata by default
- Clean up the DAIF flags handling for EL0 returns (in preparation
for NMI support)
- Kselftest update for ptrace()
- Update some of the sysreg field definitions
- Slight improvement in the code generation for inline asm I/O
accessors to permit offset addressing
- kretprobes: acquire regs via a BRK exception (previously done
via a trampoline handler)
- SVE/SME cleanups, comment updates
- Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously
disabled due to gcc silently ignoring -falign-functions=N)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits)
Revert "mm: add arch hook to validate mmap() prot flags"
Revert "arm64: mm: add support for WXN memory translation attribute"
Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512"
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
...
|
||
|
Catalin Marinas
|
0c5ade742e |
Merge branches 'for-next/reorg-va-space', 'for-next/rust-for-arm64', 'for-next/misc', 'for-next/daif-cleanup', 'for-next/kselftest', 'for-next/documentation', 'for-next/sysreg' and 'for-next/dpisa', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: (39 commits)
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
drivers/perf: hisi_pcie: Merge find_related_event() and get_event_idx()
drivers/perf: hisi_pcie: Relax the check on related events
drivers/perf: hisi_pcie: Check the target filter properly
drivers/perf: hisi_pcie: Add more events for counting TLP bandwidth
drivers/perf: hisi_pcie: Fix incorrect counting under metric mode
drivers/perf: hisi_pcie: Introduce hisi_pcie_pmu_get_event_ctrl_val()
drivers/perf: hisi_pcie: Rename hisi_pcie_pmu_{config,clear}_filter()
drivers/perf: hisi: Enable HiSilicon Erratum 162700402 quirk for HIP09
perf/arm_cspmu: Add devicetree support
dt-bindings/perf: Add Arm CoreSight PMU
perf/arm_cspmu: Simplify counter reset
perf/arm_cspmu: Simplify attribute groups
perf/arm_cspmu: Simplify initialisation
...
* for-next/reorg-va-space:
: Reorganise the arm64 kernel VA space in preparation for LPA2 support
: (52-bit VA/PA).
arm64: kaslr: Adjust randomization range dynamically
arm64: mm: Reclaim unused vmemmap region for vmalloc use
arm64: vmemmap: Avoid base2 order of struct page size to dimension region
arm64: ptdump: Discover start of vmemmap region at runtime
arm64: ptdump: Allow all region boundaries to be defined at boot time
arm64: mm: Move fixmap region above vmemmap region
arm64: mm: Move PCI I/O emulation region above the vmemmap region
* for-next/rust-for-arm64:
: Enable Rust support for arm64
arm64: rust: Enable Rust support for AArch64
rust: Refactor the build target to allow the use of builtin targets
* for-next/misc:
: Miscellaneous arm64 patches
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
arm64: Remove enable_daif macro
arm64/hw_breakpoint: Directly use ESR_ELx_WNR for an watchpoint exception
arm64: cpufeatures: Clean up temporary variable to simplify code
arm64: Update setup_arch() comment on interrupt masking
arm64: remove unnecessary ifdefs around is_compat_task()
arm64: ftrace: Don't forbid CALL_OPS+CC_OPTIMIZE_FOR_SIZE with Clang
arm64/sme: Ensure that all fields in SMCR_EL1 are set to known values
arm64/sve: Ensure that all fields in ZCR_EL1 are set to known values
arm64/sve: Document that __SVE_VQ_MAX is much larger than needed
arm64: make member of struct pt_regs and it's offset macro in the same order
arm64: remove unneeded BUILD_BUG_ON assertion
arm64: kretprobes: acquire the regs via a BRK exception
arm64: io: permit offset addressing
arm64: errata: Don't enable workarounds for "rare" errata by default
* for-next/daif-cleanup:
: Clean up DAIF handling for EL0 returns
arm64: Unmask Debug + SError in do_notify_resume()
arm64: Move do_notify_resume() to entry-common.c
arm64: Simplify do_notify_resume() DAIF masking
* for-next/kselftest:
: Miscellaneous arm64 kselftest patches
kselftest/arm64: Test that ptrace takes effect in the target process
* for-next/documentation:
: arm64 documentation patches
arm64/sme: Remove spurious 'is' in SME documentation
arm64/fp: Clarify effect of setting an unsupported system VL
arm64/sme: Fix cut'n'paste in ABI document
arm64/sve: Remove bitrotted comment about syscall behaviour
* for-next/sysreg:
: sysreg updates
arm64/sysreg: Update ID_AA64DFR0_EL1 register
arm64/sysreg: Update ID_DFR0_EL1 register fields
arm64/sysreg: Add register fields for ID_AA64DFR1_EL1
* for-next/dpisa:
: Support for 2023 dpISA extensions
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
|
||
|
Mark Brown
|
4035c22ef7 |
arm64/ptrace: Expose FPMR via ptrace
Add a new regset to expose FPMR via ptrace. It is not added to the FPSIMD registers since that structure is exposed elsewhere without any allowance for extension we don't add there. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-5-c568edc8ed7f@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Leonardo Bras
|
1984c80546 |
arm64: remove unnecessary ifdefs around is_compat_task()
Currently some parts of the codebase will test for CONFIG_COMPAT before testing is_compat_task(). is_compat_task() is a inlined function only present on CONFIG_COMPAT. On the other hand, for !CONFIG_COMPAT, we have in linux/compat.h: #define is_compat_task() (0) Since we have this define available in every usage of is_compat_task() for !CONFIG_COMPAT, it's unnecessary to keep the ifdefs, since the compiler is smart enough to optimize-out those snippets on CONFIG_COMPAT=n This requires some regset code as well as a few other defines to be made available on !CONFIG_COMPAT, so some symbols can get resolved before getting optimized-out. Signed-off-by: Leonardo Bras <leobras@redhat.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240109034651.478462-2-leobras@redhat.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
2813926261 |
arm64/sve: Lower the maximum allocation for the SVE ptrace regset
Doug Anderson observed that ChromeOS crashes are being reported which
include failing allocations of order 7 during core dumps due to ptrace
allocating storage for regsets:
chrome: page allocation failure: order:7,
mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO),
nodemask=(null),cpuset=urgent,mems_allowed=0
...
regset_get_alloc+0x1c/0x28
elf_core_dump+0x3d8/0xd8c
do_coredump+0xeb8/0x1378
with further investigation showing that this is:
[ 66.957385] DOUG: Allocating 279584 bytes
which is the maximum size of the SVE regset. As Doug observes it is not
entirely surprising that such a large allocation of contiguous memory might
fail on a long running system.
The SVE regset is currently sized to hold SVE registers with a VQ of
SVE_VQ_MAX which is 512, substantially more than the architectural maximum
of 16 which we might see even in a system emulating the limits of the
architecture. Since we don't expose the size we tell the regset core
externally let's define ARCH_SVE_VQ_MAX with the actual architectural
maximum and use that for the regset, we'll still overallocate most of the
time but much less so which will be helpful even if the core is fixed to
not require contiguous allocations.
Specify ARCH_SVE_VQ_MAX in terms of the maximum value that can be written
into ZCR_ELx.LEN (where this is set in the hardware). For consistency
update the maximum SME vector length to be specified in the same style
while we are at it.
We could also teach the ptrace core about runtime discoverable regset sizes
but that would be a more invasive change and this is being observed in
practical systems.
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240213-arm64-sve-ptrace-regset-size-v2-1-c7600ca74b9b@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
||
|
Linus Torvalds
|
18b5cb6cb8 |
arm64 fixes for -rc1
- Fix shadow call stack patching with LTO=full - Fix voluntary preemption of the FPSIMD registers from assembly code - Fix workaround for A520 CPU erratum #2966298 and extend to A510 - Fix SME issues that resulted in corruption of the register state - Minor fixes (missing includes, formatting) -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmWqUgEQHHdpbGxAa2Vy bmVsLm9yZwAKCRC3rHDchMFjNB+7B/0VDHq2F8KtOhW02XqcKJaqiDk8QggTZn0D 3JxZs6P6y9KP88xa6gr3G+PzLYjKV66aP871oKPECtsQAAIJzMUfhB7C7+zJzxPL kxrP3fTCwGUUkBlH7+dhyoX4hmV174c0xp70vp/2+hG5IixwtpFVi4284pgU6RcC El6LH0UrRiHUI7oP5vLArk3vp1X8yFXxGRCeFCmP9mOBB4Auf9q5F0YoESPz0LBS ohb9L8vZw1eBYJxoSNiGo819FX4Q2nximR75byLYMB1+M0wlqFo1Or/AbfpZGPzY q5plHckTU25NxPEMWVvzXlu/O1gBkAfsWcxb0TIDpVWGDrL1+6Qm =9pba -----END PGP SIGNATURE----- Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I think the main one is fixing the dynamic SCS patching when full LTO is enabled (clang was silently getting this horribly wrong), but it's all good stuff. Rob just pointed out that the fix to the workaround for erratum #2966298 might not be necessary, but in the worst case it's harmless and since the official description leaves a little to be desired here, I've left it in. Summary: - Fix shadow call stack patching with LTO=full - Fix voluntary preemption of the FPSIMD registers from assembly code - Fix workaround for A520 CPU erratum #2966298 and extend to A510 - Fix SME issues that resulted in corruption of the register state - Minor fixes (missing includes, formatting)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix silcon-errata.rst formatting arm64/sme: Always exit sme_alloc() early with existing storage arm64/fpsimd: Remove spurious check for SVE support arm64/ptrace: Don't flush ZA/ZT storage when writing ZA via ptrace arm64: entry: simplify kernel_exit logic arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD arm64: errata: Add Cortex-A510 speculative unprivileged load workaround arm64: Rename ARM64_WORKAROUND_2966298 arm64: fpsimd: Bring cond_yield asm macro in line with new rules arm64: scs: Work around full LTO issue with dynamic SCS arm64: irq: include <linux/cpumask.h> |
||
|
Mark Brown
|
b7c510d049 |
arm64/ptrace: Don't flush ZA/ZT storage when writing ZA via ptrace
When writing ZA we currently unconditionally flush the buffer used to store
it as part of ensuring that it is allocated. Since this buffer is shared
with ZT0 this means that a write to ZA when PSTATE.ZA is already set will
corrupt the value of ZT0 on a SME2 system. Fix this by only flushing the
backing storage if PSTATE.ZA was not previously set.
This will mean that short or failed writes may leave stale data in the
buffer, this seems as correct as our current behaviour and unlikely to be
something that userspace will rely on.
Fixes:
|
||
|
Kent Overstreet
|
932562a604 |
rseq: Split out rseq.h from sched.h
We're trying to get sched.h down to more or less just types only, not code - rseq can live in its own header. This helps us kill the dependency on preempt.h in sched.h. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Linus Torvalds
|
542034175c |
arm64 updates for 6.6
CPU features and system registers:
* Advertise hinted conditional branch support (FEAT_HBC) to
userspace
* Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
* Fix macro name typo in SME documentation
Entry code:
* Unmask exceptions earlier on the system call entry path
Memory management:
* Don't bother clearing PTE_RDONLY for dirty ptes in
pte_wrprotect() and pte_modify()
Perf and PMU drivers:
* Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
* Fix hw_breakpoint single-stepping when called from bpf
* Fixes for DDR PMU on i.MX8MP SoC
* Add NUMA-awareness to Hisilicon PCIe PMU driver
* Fix locking dependency issue in Arm DMC620 PMU driver
* Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
* Add support for Arm CMN-700 r3 parts to the CMN PMU driver
* Add support for recent Arm Cortex CPU PMUs
* Update Hisilicon PMU maintainers
Selftests:
* Add a bunch of new features to the hwcap test (JSCVT, PMULL,
AES, SHA1, etc)
* Fix SSVE test to leave streaming-mode after grabbing the
signal context
* Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
* Allow compiler to warn on suspicious looking system register
expressions
* Work around SDEI firmware bug by aborting any running
handlers on a kernel crash
* Fix some harmless warnings when building with W=1
* Remove some unused function declarations
* Other minor fixes and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmTon4QQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG0nCAC9lTqppELnqXPA3FswONhtDBnKEufZHp0+
4+Z6CPjAYZpd7ruiezvxeZA62tZl3eX+tYOx+6lf4xYxFA5W/RQdmxM7e0mGJd+n
sgps85kxArApCgJR9zJiTCAIPXzKH5ObsFWWbcRljI9fiISVDTYn1JFAEx9UERI5
5yr6blYF2H115oD8V2f/0vVObGOAuiqNnzqJIuKL1I8H9xBK0pssrKvuCCN8J2o4
28+PeO7PzwWPiSfnO15bLd/bGuzbMCcexv4/DdjtLZaAanW7crJRVAzOon+URuVx
JXmkzQvXkOgSKnEFwfVRYTsUbtOz2cBafjSujVmjwIBymhbBCZR/
=WqmX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"I think we have a bit less than usual on the architecture side, but
that's somewhat balanced out by a large crop of perf/PMU driver
updates and extensions to our selftests.
CPU features and system registers:
- Advertise hinted conditional branch support (FEAT_HBC) to userspace
- Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
- Fix macro name typo in SME documentation
Entry code:
- Unmask exceptions earlier on the system call entry path
Memory management:
- Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
and pte_modify()
Perf and PMU drivers:
- Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
- Fix hw_breakpoint single-stepping when called from bpf
- Fixes for DDR PMU on i.MX8MP SoC
- Add NUMA-awareness to Hisilicon PCIe PMU driver
- Fix locking dependency issue in Arm DMC620 PMU driver
- Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
- Add support for Arm CMN-700 r3 parts to the CMN PMU driver
- Add support for recent Arm Cortex CPU PMUs
- Update Hisilicon PMU maintainers
Selftests:
- Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
SHA1, etc)
- Fix SSVE test to leave streaming-mode after grabbing the signal
context
- Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
- Allow compiler to warn on suspicious looking system register
expressions
- Work around SDEI firmware bug by aborting any running handlers on a
kernel crash
- Fix some harmless warnings when building with W=1
- Remove some unused function declarations
- Other minor fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
kselftest/arm64: Fix hwcaps selftest build
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
arm64/sysreg: refactor deprecated strncpy
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
kselftest/arm64: build BTI tests in output directory
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
kselftest/arm64: fix a memleak in zt_regs_run()
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
...
|
||
|
Mark Brown
|
2f43f549cd |
arm64/ptrace: Ensure that the task sees ZT writes on first use
When the value of ZT is set via ptrace we don't disable traps for SME.
This means that when a the task has never used SME before then the value
set via ptrace will never be seen by the target task since it will
trigger a SME access trap which will flush the register state.
Disable SME traps when setting ZT, this means we also need to allocate
storage for SVE if it is not already allocated, for the benefit of
streaming SVE.
Fixes:
|
||
|
Mark Brown
|
5d0a8d2fba |
arm64/ptrace: Ensure that SME is set up for target when writing SSVE state
When we use NT_ARM_SSVE to either enable streaming mode or change the
vector length for a process we do not currently do anything to ensure that
there is storage allocated for the SME specific register state. If the
task had not previously used SME or we changed the vector length then
the task will not have had TIF_SME set or backing storage for ZA/ZT
allocated, resulting in inconsistent register sizes when saving state
and spurious traps which flush the newly set register state.
We should set TIF_SME to disable traps and ensure that storage is
allocated for ZA and ZT if it is not already allocated. This requires
modifying sme_alloc() to make the flush of any existing register state
optional so we don't disturb existing state for ZA and ZT.
Fixes:
|
||
|
Mark Brown
|
045aecdfcb |
arm64/ptrace: Don't enable SVE when setting streaming SVE
Systems which implement SME without also implementing SVE are
architecturally valid but were not initially supported by the kernel,
unfortunately we missed one issue in the ptrace code.
The SVE register setting code is shared between SVE and streaming mode
SVE. When we set full SVE register state we currently enable TIF_SVE
unconditionally, in the case where streaming SVE is being configured on a
system that supports vanilla SVE this is not an issue since we always
initialise enough state for both vector lengths but on a system which only
support SME it will result in us attempting to restore the SVE vector
length after having set streaming SVE registers.
Fix this by making the enabling of SVE conditional on setting SVE vector
state. If we set streaming SVE state and SVE was not already enabled this
will result in a SVE access trap on next use of normal SVE, this will cause
us to flush our register state but this is fine since the only way to
trigger a SVE access trap would be to exit streaming mode which will cause
the in register state to be flushed anyway.
Fixes:
|
||
|
Mark Brown
|
89a65c3f17 |
arm64/ptrace: Flush FP state when setting ZT0
When setting ZT0 via ptrace we do not currently force a reload of the
floating point register state from memory, do that to ensure that the newly
set value gets loaded into the registers on next task execution.
The function was templated off the function for FPSIMD which due to our
providing the option of embedding a FPSIMD regset within the SVE regset
does not directly include the flush.
Fixes:
|
||
|
Christophe JAILLET
|
5f69ca4229 |
arm64/ptrace: Clean up error handling path in sve_set_common()
All error handling paths go to 'out', except this one. Be consistent and
also branch to 'out' here.
Fixes:
|
||
|
Linus Torvalds
|
8bf1a529cd |
arm64 updates for 6.3:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore. - Include TPIDR2 in the signal context and add the corresponding kselftests. - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time. - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64. - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables. - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values). - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure. - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice. - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone. - Further arm64 sysreg conversion and some fixes. - arm64 kselftest fixes and improvements. - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation. - Pseudo-NMI code generation optimisations. - Minor fixes for SME and TPIDR2 handling. - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmP0/QsACgkQa9axLQDI XvG+gA/+JDVEH9wRzAIZvbp9hSuohPc48xgAmIMP1eiVB0/5qeRjYAJwS33H0rXS BPC2kj9IBy/eQeM9ICg0nFd0zYznSVacITqe6NrqeJ1F+ftS4rrHdfxd+J7kIoCs V2L8e+BJvmHdhmNV2qMAgJdGlfxfQBA7fv2cy52HKYcouoOh1AUVR/x+yXVXAsCd qJP3+dlUKccgm/oc5unEC1eZ49u8O+EoasqOyfG6K5udMgzhEX3K6imT9J3hw0WT UjstYkx5uGS/prUrRCQAX96VCHoZmzEDKtQuHkHvQXEYXsYPF3ldbR2CziNJnHe7 QfSkjJlt8HAtExA+BkwEe9i0MQO/2VF5qsa2e4fA6l7uqGu3LOtS/jJd23C9n9fR Id8aBMeN6S8+MjqRA9L2uf4t6e4ISEHoG9ZRdc4WOwloxEEiJoIeun+7bHdOSZLj AFdHFCz4NXiiwC0UP0xPDI2YeCLqt5np7HmnrUqwzRpVO8UUagiJD8TIpcBSjBN9 J68eidenHUW7/SlIeaMKE2lmo8AUEAJs9AorDSugF19/ThJcQdx7vT2UAZjeVB3j 1dbbwajnlDOk/w8PQC4thFp5/MDlfst0htS3WRwa+vgkweE2EAdTU4hUZ8qEP7FQ smhYtlT1xUSTYDTqoaG/U2OWR6/UU79wP0jgcOsHXTuyYrtPI/Q= =VmXL -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ... |
||
|
Catalin Marinas
|
156010ed9c |
Merge branches 'for-next/sysreg', 'for-next/sme', 'for-next/kselftest', 'for-next/misc', 'for-next/sme2', 'for-next/tpidr2', 'for-next/scs', 'for-next/compat-hwcap', 'for-next/ftrace', 'for-next/efi-boot-mmu-on', 'for-next/ptrauth' and 'for-next/pseudo-nmi', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable perf: arm_spe: Support new SPEv1.2/v8.7 'not taken' event perf: arm_spe: Use new PMSIDR_EL1 register enums perf: arm_spe: Drop BIT() and use FIELD_GET/PREP accessors arm64/sysreg: Convert SPE registers to automatic generation arm64: Drop SYS_ from SPE register defines perf: arm_spe: Use feature numbering for PMSEVFR_EL1 defines perf/marvell: Add ACPI support to TAD uncore driver perf/marvell: Add ACPI support to DDR uncore driver perf/arm-cmn: Reset DTM_PMU_CONFIG at probe drivers/perf: hisi: Extract initialization of "cpa_pmu->pmu" drivers/perf: hisi: Simplify the parameters of hisi_pmu_init() drivers/perf: hisi: Advertise the PERF_PMU_CAP_NO_EXCLUDE capability * for-next/sysreg: : arm64 sysreg and cpufeature fixes/updates KVM: arm64: Use symbolic definition for ISR_EL1.A arm64/sysreg: Add definition of ISR_EL1 arm64/sysreg: Add definition for ICC_NMIAR1_EL1 arm64/cpufeature: Remove 4 bit assumption in ARM64_FEATURE_MASK() arm64/sysreg: Fix errors in 32 bit enumeration values arm64/cpufeature: Fix field sign for DIT hwcap detection * for-next/sme: : SME-related updates arm64/sme: Optimise SME exit on syscall entry arm64/sme: Don't use streaming mode to probe the maximum SME VL arm64/ptrace: Use system_supports_tpidr2() to check for TPIDR2 support * for-next/kselftest: (23 commits) : arm64 kselftest fixes and improvements kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context kselftest/arm64: Fix enumeration of systems without 128 bit SME for SSVE+ZA kselftest/arm64: Fix enumeration of systems without 128 bit SME kselftest/arm64: Don't require FA64 for streaming SVE tests kselftest/arm64: Limit the maximum VL we try to set via ptrace kselftest/arm64: Correct buffer size for SME ZA storage kselftest/arm64: Remove the local NUM_VL definition kselftest/arm64: Verify simultaneous SSVE and ZA context generation kselftest/arm64: Verify that SSVE signal context has SVE_SIG_FLAG_SM set kselftest/arm64: Remove spurious comment from MTE test Makefile kselftest/arm64: Support build of MTE tests with clang kselftest/arm64: Initialise current at build time in signal tests kselftest/arm64: Don't pass headers to the compiler as source kselftest/arm64: Remove redundant _start labels from FP tests kselftest/arm64: Fix .pushsection for strings in FP tests kselftest/arm64: Run BTI selftests on systems without BTI kselftest/arm64: Fix test numbering when skipping tests kselftest/arm64: Skip non-power of 2 SVE vector lengths in fp-stress kselftest/arm64: Only enumerate power of two VLs in syscall-abi ... * for-next/misc: : Miscellaneous arm64 updates arm64/mm: Intercept pfn changes in set_pte_at() Documentation: arm64: correct spelling arm64: traps: attempt to dump all instructions arm64: Apply dynamic shadow call stack patching in two passes arm64: el2_setup.h: fix spelling typo in comments arm64: Kconfig: fix spelling arm64: cpufeature: Use kstrtobool() instead of strtobool() arm64: Avoid repeated AA64MMFR1_EL1 register read on pagefault path arm64: make ARCH_FORCE_MAX_ORDER selectable * for-next/sme2: (23 commits) : Support for arm64 SME 2 and 2.1 arm64/sme: Fix __finalise_el2 SMEver check kselftest/arm64: Remove redundant _start labels from zt-test kselftest/arm64: Add coverage of SME 2 and 2.1 hwcaps kselftest/arm64: Add coverage of the ZT ptrace regset kselftest/arm64: Add SME2 coverage to syscall-abi kselftest/arm64: Add test coverage for ZT register signal frames kselftest/arm64: Teach the generic signal context validation about ZT kselftest/arm64: Enumerate SME2 in the signal test utility code kselftest/arm64: Cover ZT in the FP stress test kselftest/arm64: Add a stress test program for ZT0 arm64/sme: Add hwcaps for SME 2 and 2.1 features arm64/sme: Implement ZT0 ptrace support arm64/sme: Implement signal handling for ZT arm64/sme: Implement context switching for ZT0 arm64/sme: Provide storage for ZT0 arm64/sme: Add basic enumeration for SME2 arm64/sme: Enable host kernel to access ZT0 arm64/sme: Manually encode ZT0 load and store instructions arm64/esr: Document ISS for ZT0 being disabled arm64/sme: Document SME 2 and SME 2.1 ABI ... * for-next/tpidr2: : Include TPIDR2 in the signal context kselftest/arm64: Add test case for TPIDR2 signal frame records kselftest/arm64: Add TPIDR2 to the set of known signal context records arm64/signal: Include TPIDR2 in the signal context arm64/sme: Document ABI for TPIDR2 signal information * for-next/scs: : arm64: harden shadow call stack pointer handling arm64: Stash shadow stack pointer in the task struct on interrupt arm64: Always load shadow stack pointer directly from the task struct * for-next/compat-hwcap: : arm64: Expose compat ARMv8 AArch32 features (HWCAPs) arm64: Add compat hwcap SSBS arm64: Add compat hwcap SB arm64: Add compat hwcap I8MM arm64: Add compat hwcap ASIMDBF16 arm64: Add compat hwcap ASIMDFHM arm64: Add compat hwcap ASIMDDP arm64: Add compat hwcap FPHP and ASIMDHP * for-next/ftrace: : Add arm64 support for DYNAMICE_FTRACE_WITH_CALL_OPS arm64: avoid executing padding bytes during kexec / hibernation arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS arm64: ftrace: Update stale comment arm64: patching: Add aarch64_insn_write_literal_u64() arm64: insn: Add helpers for BTI arm64: Extend support for CONFIG_FUNCTION_ALIGNMENT ACPI: Don't build ACPICA with '-Os' Compiler attributes: GCC cold function alignment workarounds ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS * for-next/efi-boot-mmu-on: : Permit arm64 EFI boot with MMU and caches on arm64: kprobes: Drop ID map text from kprobes blacklist arm64: head: Switch endianness before populating the ID map efi: arm64: enter with MMU and caches enabled arm64: head: Clean the ID map and the HYP text to the PoC if needed arm64: head: avoid cache invalidation when entering with the MMU on arm64: head: record the MMU state at primary entry arm64: kernel: move identity map out of .text mapping arm64: head: Move all finalise_el2 calls to after __enable_mmu * for-next/ptrauth: : arm64 pointer authentication cleanup arm64: pauth: don't sign leaf functions arm64: unify asm-arch manipulation * for-next/pseudo-nmi: : Pseudo-NMI code generation optimisations arm64: irqflags: use alternative branches for pseudo-NMI logic arm64: add ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap arm64: make ARM64_HAS_GIC_PRIO_MASKING depend on ARM64_HAS_GIC_CPUIF_SYSREGS arm64: rename ARM64_HAS_IRQ_PRIO_MASKING to ARM64_HAS_GIC_PRIO_MASKING arm64: rename ARM64_HAS_SYSREG_GIC_CPUIF to ARM64_HAS_GIC_CPUIF_SYSREGS |
||
|
Mark Brown
|
f90b529bcb |
arm64/sme: Implement ZT0 ptrace support
Implement support for a new note type NT_ARM64_ZT providing access to ZT0 when implemented. Since ZT0 is a register with constant size this is much simpler than for other SME state. As ZT0 is only accessible when PSTATE.ZA is set writes to ZT0 cause PSTATE.ZA to be set, the main alternative would be to return -EBUSY in this case but this seemed more constructive. Practical users are also going to be working with ZA anyway and have some understanding of the state. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-12-f2fa0aef982f@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
ce514000da |
arm64/sme: Rename za_state to sme_state
In preparation for adding support for storage for ZT0 to the thread_struct rename za_state to sme_state. Since ZT0 is accessible when PSTATE.ZA is set just like ZA itself we will extend the allocation done for ZA to cover it, avoiding the need to further expand task_struct for non-SME tasks. No functional changes. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-1-f2fa0aef982f@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
c3cdd54c61 |
arm64/ptrace: Use system_supports_tpidr2() to check for TPIDR2 support
We have a separate system_supports_tpidr2() to check for TPIDR2 support but were using system_supports_sme() in tls_set(). While these are currently identical let's use the specific check instead so we don't have any surprises in future. Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221208-arm64-tpidr2-ptrace-feat-v2-1-3760c895a574@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Zenghui Yu
|
eb9a85261e |
arm64: ptrace: Use ARM64_SME to guard the SME register enumerations
We currently guard REGSET_{SSVE, ZA} using ARM64_SVE for no good reason.
Both enumerations would be pointless without ARM64_SME and create two empty
entries in aarch64_regsets[] which would then become part of a process's
native regset view (they should be ignored though).
Switch to use ARM64_SME instead.
Fixes:
|
||
|
Linus Torvalds
|
8702f2c611 |
Non-MM patches for 6.2-rc1.
- A ptrace API cleanup series from Sergey Shtylyov - Fixes and cleanups for kexec from ye xingchen - nilfs2 updates from Ryusuke Konishi - squashfs feature work from Xiaoming Ni: permit configuration of the filesystem's compression concurrency from the mount command line. - A series from Akinobu Mita which addresses bound checking errors when writing to debugfs files. - A series from Yang Yingliang to address rapido memory leaks - A series from Zheng Yejian to address possible overflow errors in encode_comp_t(). - And a whole shower of singleton patches all over the place. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5efRgAKCRDdBJ7gKXxA jgvdAP0al6oFDtaSsshIdNhrzcMwfjt6PfVxxHdLmNhF1hX2dwD/SVluS1bPSP7y 0sZp7Ustu3YTb8aFkMl96Y9m9mY1Nwg= =ga5B -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - A ptrace API cleanup series from Sergey Shtylyov - Fixes and cleanups for kexec from ye xingchen - nilfs2 updates from Ryusuke Konishi - squashfs feature work from Xiaoming Ni: permit configuration of the filesystem's compression concurrency from the mount command line - A series from Akinobu Mita which addresses bound checking errors when writing to debugfs files - A series from Yang Yingliang to address rapidio memory leaks - A series from Zheng Yejian to address possible overflow errors in encode_comp_t() - And a whole shower of singleton patches all over the place * tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits) ipc: fix memory leak in init_mqueue_fs() hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount rapidio: devices: fix missing put_device in mport_cdev_open kcov: fix spelling typos in comments hfs: Fix OOB Write in hfs_asc2mac hfs: fix OOB Read in __hfs_brec_find relay: fix type mismatch when allocating memory in relay_create_buf() ocfs2: always read both high and low parts of dinode link count io-mapping: move some code within the include guarded section kernel: kcsan: kcsan_test: build without structleak plugin mailmap: update email for Iskren Chernev eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD rapidio: fix possible UAF when kfifo_alloc() fails relay: use strscpy() is more robust and safer cpumask: limit visibility of FORCE_NR_CPUS acct: fix potential integer overflow in encode_comp_t() acct: fix accuracy loss for input value of encode_comp_t() linux/init.h: include <linux/build_bug.h> and <linux/stringify.h> rapidio: rio: fix possible name leak in rio_register_mport() rapidio: fix possible name leaks when rio_add_device() fails ... |
||
|
Mark Brown
|
bbc6172eef |
arm64/fpsimd: SME no longer requires SVE register state
Now that we track the type of the stored register state separately to what is active in the task, it is valid to have the FPSIMD register state stored while in streaming mode. Remove the special case handling for SME when setting FPSIMD register state. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-7-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Mark Brown
|
baa8515281 |
arm64/fpsimd: Track the saved FPSIMD state type separately to TIF_SVE
When we save the state for the floating point registers this can be done in the form visible through either the FPSIMD V registers or the SVE Z and P registers. At present we track which format is currently used based on TIF_SVE and the SME streaming mode state but particularly in the SVE case this limits our options for optimising things, especially around syscalls. Introduce a new enum which we place together with saved floating point state in both thread_struct and the KVM guest state which explicitly states which format is active and keep it up to date when we change it. At present we do not use this state except to verify that it has the expected value when loading the state, future patches will introduce functional changes. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-3-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Sergey Shtylyov
|
687daeeeca |
arm64: ptrace: user_regset_copyin_ignore() always returns 0
user_regset_copyin_ignore() always returns 0, so checking its result seems pointless -- don't do this anymore... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Link: https://lkml.kernel.org/r/20221014212235.10770-4-s.shtylyov@omp.ru Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |