The microphones (2x) on Surface Pro 11 are currently ususable due to a
misconfigured sample rate, which results in a very distorted recording
with the voice barely audible.
Under Windows, the DMIC0_CTL register is set to 0x00000005 while
recording:
bit 0 = 1 --> DMIC0 enabled
bits 3:1 = 2 --> DMIC clock divider = /4
The current dmic-sample-rate of 4800000 corresponds to the default DMIC
clock divider of /2.
Dropping dmic-sample-rate to 2400000 sets the divider to /4, matching
the working Windows configuration and resulting in perfect audio.
While we're at it, remove the reference to dmic23_default, as we only
have two microphones and don't need to configure the pins for a 3rd/4th
microphone.
Signed-off-by: Dale Whinham <daleyo@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260830-surface-pro-11-mic-fix-v1-1-36a53140373b@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a remoteproc driver and binding for AMD MicroBlaze/V soft cores
executing from dual-port BRAM, with clock and reset control and support
for firmware without a resource table.
Introduce a generic Qualcomm PAS service with SCM and OP-TEE backends,
and migrate the PAS, MSS, and WCNSS remoteproc drivers to it. Add Nord
ADSP and CDSP support, Eliza CDSP support, Maili ADSP/CDSP bindings, and
late-attach SoCCP support for Kaanapali, Hawi, Maili, and Glymur. Enable
BAM-DMUX child devices for PAS modems and fix PAS memory protection,
handover, shutdown, and resource lifetime handling.
Harden remoteproc lifecycle handling by attaching asynchronously,
stopping crashed processors, synchronizing crash work with removal, and
forcing shutdown before device resources are released. Reallocate
resources during attach recovery and fix several reference and error-path
leaks.
Add Xilinx R5 crash detection and move RPU start and stop sequencing into
the platform firmware driver. Consolidate write-combining carveout
mapping callbacks, use correct I/O-memory accessors, and share optional
ELF resource-table handling across drivers.
Convert the TI Wakeup M3 binding to DT schema, correct Qualcomm and
generic remoteproc bindings, and harden resource-table iteration against
signed-offset out-of-bounds accesses.
-----BEGIN PGP SIGNATURE-----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=wi8c
-----END PGP SIGNATURE-----
Merge tag 'rproc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Add a remoteproc driver and binding for AMD MicroBlaze/V soft cores
executing from dual-port BRAM, with clock and reset control and
support for firmware without a resource table.
Introduce a generic Qualcomm PAS service with SCM and OP-TEE backends,
and migrate the PAS, MSS, and WCNSS remoteproc drivers to it. Add Nord
ADSP and CDSP support, Eliza CDSP support, Maili ADSP/CDSP bindings,
and late-attach SoCCP support for Kaanapali, Hawi, Maili, and Glymur.
Enable BAM-DMUX child devices for PAS modems and fix PAS memory
protection, handover, shutdown, and resource lifetime handling.
Harden remoteproc lifecycle handling by attaching asynchronously,
stopping crashed processors, synchronizing crash work with removal,
and forcing shutdown before device resources are released. Reallocate
resources during attach recovery and fix several reference and
error-path leaks.
Add Xilinx R5 crash detection and move RPU start and stop sequencing
into the platform firmware driver. Consolidate write-combining
carveout mapping callbacks, use correct I/O-memory accessors, and
share optional ELF resource-table handling across drivers.
Convert the TI Wakeup M3 binding to DT schema, correct Qualcomm and
generic remoteproc bindings, and harden resource-table iteration
against signed-offset out-of-bounds accesses"
* tag 'rproc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (60 commits)
remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry()
remoteproc: replace BSD blurb with SPDX identifier in rsc_table.h
remoteproc: replace BSD blurb with SPDX identifier in remoteproc.h
remoteproc: fix coding style issues in remoteproc.h
MAINTAINERS: add rsc_table.h to remoteproc entry
remoteproc: qcom: pas: Add Nord ADSP and CDSP support
dt-bindings: remoteproc: qcom,nord-pas: Document Nord PAS
remoteproc: qcom: pas: Drop unused dtb_mem_region field
remoteproc: qcom: pas: Map/unmap subsystem region before auth_and_reset
remoteproc: qcom: pas: Fix the PAS context creation placement
remoteproc: qcom: pas: Guard dtb metadata release with dtb_pas_id check
remoteproc: qcom: annotate mem_region fields with __iomem
arm64: dts: qcom: eliza: Add fallback compatible for ADSP remoteproc
dt-bindings: remoteproc: qcom,milos-pas: Move Eliza ADSP to SM8550 schema
remoteproc: qcom: pas: Add Eliza CDSP support
dt-bindings: remoteproc: qcom,sm8550-pas: Add Eliza CDSP compatible
remoteproc: qcom: q6v5: Request shutdown if crash is triggered host-side
remoteproc: Force shutdown during device removal
remoteproc: Prevent crash handling to race with rproc_del()
remoteproc: Allow shutdown of crashed processors
...
There are two new mystery SoCs with very little public information
about them so far, Qualcomm's Cortex-A78C based "Shikra" and
Altera's Cortex-A720 based Agilex72 SOCFPGA.
We have also gained support for a couple of SoCs from the
2023/2024 timeframe that have been in the making for a while:
- The Apple platform gains support for M3 Pro, Max and Ultra SoC,
following the basic M3 support from 7.2.
- Samsung Exynos 1580 is a high-end mobile phone SoC from 2024
- Canaan K230 is a RISC-V based 64-bit AI SoC, based on the
earlier K210 chip
- Sophgo SG2000 is a mixed Arm/RISC-V chip that was already
supported using the Arm core but is now also added for RISC-V
along with several other variants of the cv18xx series
In terms of newly added machines we have reference platforms
for all the chips above, plus
- only four 32-bit Arm boards: two older phones and two
older industrial/embedded boards; using Allwinner, Qualcomm and
Rockchip SoCs
- Three laptops und three phones using Qualcomm SoCs
- Ten 64-bit Rockchips based single-board computers, along with one
NAS box and a game console.
- Seven industrial/embedded boards and modules using NXP i.MX8/9 SoCs.
- A Lenovo desktop box based on NVIDIA Jetson Xavier NX
- A few more single-board computers based on Allwinnner A133,
Spacemit K1 and TI AM62.
As usual, there is a constant stream of minor cleanups and fixes
towards addressing the 'dt-check-style --mode strict' warnings,
and everyone is expected to address those warnings for new
submissions now.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmqDZaMACgkQmmx57+YA
GNkkiRAAusVNTkNVcpq+QGDhd6DfLd+d4vcvTJkBZ5WyJuqKs1qZPFIMQ0iMW1cY
hahBeYoowRX1oaB7KZc/MBE0IkOna35CEwiL6dm553xq+P208auqpNLpXTSKWsvx
jW4eYpdA6Bt6SM9J/583Ix71b5UFsLV+W3YKT2CBUZYn9yilAEz6kPa/Hxxa1Sia
3841Fdy6jcqusw1alzLQvrR7FxdtPFCs1f/a/GzBmZI7fxnj/cBwVghinSF9F0XW
BzDaUjMDzBYqSlMb7auNH0IpDeVuTx2Pch+YLrE8YVVPVf3nawd48ziwXO6zRsGx
HccLDuHpBqwnHsAh+bWi9UdxUSzjGW4KQ/W8Fj6O2SNqxPqrK2hyRYMp+76Tl65x
2diQOajmnZ4m8E5ToWsxpRxrlo6TKo33W63HglGIA24vr0gEi9FpA3kYiaWP2ZBD
qZz5xMeRmO1son1vtWX1CzsWFdogqBuGdztOyMoY4viSeY/ltT1EvIC0AiTIeSOt
krOFFDxwHvu+HOPJJ15VCVwEutUnGytB2nwBc/krhNS6MSlwg9DpY53RAhBxl0Jh
KXpPqBUpbl0Flty2rxdPx2EAt7MqeLTNXSSdzP7tvvumsT1Ik+zlPk+MkgLZ0Y5u
71fJrcij+0LeFDCzw81jGLoYSCw+9aNaELcF+OluL6rK8YFaBOE=
=RQan
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are two new mystery SoCs with very little public information
about them so far, Qualcomm's Cortex-A78C based "Shikra" and Altera's
Cortex-A720 based Agilex72 SOCFPGA.
We have also gained support for a couple of SoCs from the 2023/2024
timeframe that have been in the making for a while:
- The Apple platform gains support for M3 Pro, Max and Ultra SoC,
following the basic M3 support from 7.2.
- Samsung Exynos 1580 is a high-end mobile phone SoC from 2024
- Canaan K230 is a RISC-V based 64-bit AI SoC, based on the earlier
K210 chip
- Sophgo SG2000 is a mixed Arm/RISC-V chip that was already supported
using the Arm core but is now also added for RISC-V along with
several other variants of the cv18xx series
In terms of newly added machines we have reference platforms for all
the chips above, plus
- Only four 32-bit Arm boards: two older phones and two older
industrial/embedded boards; using Allwinner, Qualcomm and Rockchip
SoCs
- Three laptops und three phones using Qualcomm SoCs
- Ten 64-bit Rockchips based single-board computers, along with one
NAS box and a game console.
- Seven industrial/embedded boards and modules using NXP i.MX8/9
SoCs.
- A Lenovo desktop box based on NVIDIA Jetson Xavier NX
- A few more single-board computers based on Allwinnner A133,
Spacemit K1 and TI AM62.
As usual, there is a constant stream of minor cleanups and fixes
towards addressing the 'dt-check-style --mode strict' warnings, and
everyone is expected to address those warnings for new submissions
now"
* tag 'soc-dt-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (864 commits)
Revert "riscv: dts: spacemit: k3: add i2s0-i2s5 nodes"
Documentation/process: maintainer-soc: Mention expectation about dt-check-style
ARM: dts: helios4: add SATA regulator supplies
ARM: dts: helios4: add vcc-supply to GPIO expander
ARM: dts: helios4: add vcc-supply to EEPROM
arm64: dts: turris-mox: fix usb3 phys
arm64: dts: ti: Correct white-space style
arm64: dts: ti: k3-am64: Fix MDIO clock reference for ICSSG0 node
arm64: dts: qcom: talos-evk: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sa8155p-adp: Fix swapped USB and UFS QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: eliza-mtp: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: lemans: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: glymur: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: kaanapali: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sar2130p: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sm8750: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sm8650: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: purwa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: hamoa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sc8180x: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
...
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHY on this board, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 0f9e6db8a2 ("arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-28-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB and UFS QMP PHYs on this board, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 12dd4ebda4 ("arm64: dts: qcom: Fix usb entries for SA8155p adp board")
Fixes: 5b85e8f222 ("arm64: dts: qcom: sa8155p-adp: Add base dts file")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-27-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be the lower voltage (~0.8V)
and the vdda-pll supply to be the higher voltage (~1.2V), as used by the
UFS QMP PHY on this SoC. But these two supplies are swapped for the USB
QMP PHY on this board, feeding 1.15V to vdda-phy and 0.72V to vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 49dab7311f ("arm64: dts: qcom: eliza-mtp: Enable USB and ADSP support")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-26-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be the lower voltage (~0.8V)
and the vdda-pll supply to be the higher voltage (~1.2V), as used by the
PCIe and UFS QMP PHYs on this SoC. But these two supplies are swapped for
the USB QMP PHYs on these boards, feeding 1.14V to vdda-phy and 0.72V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 76326da895 ("arm64: dts: qcom: lemans: Refactor ride/ride-r3 boards based on daughter cards")
Fixes: 7bd68ef806 ("arm64: dts: qcom: lemans-evk: Enable first USB controller in device mode")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-25-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be the lower voltage (~0.8V)
and the vdda-pll supply to be the higher voltage (~1.2V), as used by the
DisplayPort QMP PHY on this SoC. But these two supplies are swapped for
the USB QMP PHYs on this board, feeding 1.2V to vdda-phy and 0.72V/0.83V
to vdda-pll.
Fix it by swapping the two supplies back.
Fixes: c8b6302945 ("arm64: dts: qcom: glymur-crd: Enable USB support")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-24-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: b2f036a675 ("arm64: dts: qcom: kaanpaali: Add USB support for MTP platform")
Fixes: 01d15f5f69 ("arm64: dts: qcom: kaanpaali: Add USB support for QRD platform")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-23-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHY on this board, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 6339e41fa3 ("arm64: dts: qcom: sar2130p: add QAR2130P board file")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-22-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 2340f29e2b ("arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform")
Fixes: 530f824a4e ("arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-21-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 6fbdb3c1fa ("arm64: dts: qcom: sm8650: add initial SM8650 MTP dts")
Fixes: a834911d50 ("arm64: dts: qcom: sm8650: add initial SM8650 QRD dts")
Fixes: 0106144102 ("arm64: dts: qcom: sm8650: add support for the SM8650-HDK board")
Fixes: df260487f3 ("arm64: dts: qcom: add basic devicetree for Ayaneo Pocket S2 gaming console")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-20-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 64a0277c98 ("arm64: dts: qcom: Add PURWA-IOT-SOM platform")
Fixes: d3f600dc45 ("arm64: dts: qcom: Add Lenovo ThinkBook 16 G7 QOY device tree")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-19-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 5098ae93ce ("arm64: dts: qcom: Add HAMOA-IOT-SOM platform")
Fixes: af24122589 ("arm64: dts: qcom: Add the Lenovo IdeaCentre Mini X")
Fixes: ae5cee8e73 ("arm64: dts: qcom: x1e80100-crd: Fix USB PHYs regulators")
Fixes: 20676f7819 ("arm64: dts: qcom: x1e80100-qcp: Fix USB PHYs regulators")
Fixes: d0e2f8f62d ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Fixes: 6516961352 ("arm64: dts: qcom: Add support for X1-based Asus Zenbook A14")
Fixes: 45247fe17d ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Fixes: 6f18b8d414 ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Fixes: 0d72ccaa1e ("arm64: dts: qcom: Add support for X1-based Surface Pro 11")
Fixes: 09d77be560 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Fixes: 8cf65490cd ("arm64: dts: qcom: Add dts for Medion SPRCHRGD 14 S1")
Fixes: f5b788d0e8 ("arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345")
Fixes: 7b8a31e82b ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows")
Fixes: 7d1cbe2f49 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6")
Fixes: e7733b4211 ("arm64: dts: qcom: Add support for Dell Inspiron 7441 / Latitude 7455")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-18-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 2ce38cc1e8 ("arm64: dts: qcom: sc8180x: Introduce Primus")
Fixes: 20dea72a39 ("arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-17-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 97a5b73b70 ("arm64: dts: qcom: sc7280-idp: Add device tree files for IDP2")
Fixes: 116f7cc43d ("arm64: dts: qcom: sc7280: Add herobrine-r1")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-16-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 0b766e7fe5 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Fixes: 7ec3e67307 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt")
Fixes: 4a9f8f8f2a ("arm64: dts: qcom: Add Acer Aspire 1")
Fixes: de8eed3597 ("arm64: dts: qcom: Add support for ECS LIVA QC710")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-15-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHY on this board, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 4cbea66876 ("arm64: dts: qcom: sm7225: Add device tree for Fairphone 4")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-14-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 04cf333afc ("arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts")
Fixes: 1cde54c54b ("arm64: dts: qcom: qcs6490: Add Thundercomm AI Mini PC G1 IoT")
Fixes: f055a39f68 ("arm64: dts: qcom: Add qcs6490-rubikpi3 board dts")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-13-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 9af6a9f32a ("arm64: dts: qcom: Add base qcm6490 idp board dts")
Fixes: a319cf4a4b ("arm64: dts: qcom: qcm6490: Introduce the Particle Tachyon")
Fixes: eee9602ad6 ("arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5")
Fixes: 249666e34c ("arm64: dts: qcom: add QCM6490 SHIFTphone 8")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-12-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHY on this board, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 0b12da4e28 ("arm64: dts: qcom: add base AIM300 dtsi")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-11-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: b5e25ded27 ("arm64: dts: qcom: sm8550: add support for the SM8550-HDK board")
Fixes: 772e6bc4a0 ("arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes")
Fixes: d228efe884 ("arm64: dts: qcom: sm8550-qrd: add QRD8550")
Fixes: 39c596304e ("arm64: dts: qcom: Add SM8550 Xperia 1 V")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-10-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.91V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 067b2b3616 ("arm64: dts: qcom: Add SM8450 HDK DTS")
Fixes: 27a0d0b846 ("arm64: dts: qcom: sm8450-qrd: Enable USB nodes")
Fixes: 1620676b85 ("arm64: dts: qcom: sm8450-nagara: Separate out Nagara platform dtsi")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-9-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 9208c19f21 ("arm64: dts: qcom: Introduce SM8350 HDK")
Fixes: c16160cfa5 ("arm64: dts: qcom: add minimal DTS for Microsoft Surface Duo 2")
Fixes: 054b40a611 ("arm64: dts: qcom: sm8350-mtp: enable USB nodes")
Fixes: 5a077120bc ("arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-8-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 91ed0e90fc ("arm64: dts: qcom: add sm8250 hdk dts")
Fixes: 221f0ef37f ("arm64: dts: sm8250-mtp: enable USB host nodes")
Fixes: 69cdb97ef6 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)")
Fixes: 264beb3cbd ("arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree")
Fixes: 52c90664f1 ("arm64: dts: qcom: qrb5165-rb5: Add USB support")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-7-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 0ab1b2d10a ("arm64: dts: qcom: add sm8150 hdk dts")
Fixes: b33d2868e8 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Fixes: d1f781db47 ("arm64: dts: qcom: add initial device-tree for Microsoft Surface Duo")
Fixes: d0a6ce59ea ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-6-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: aab69794b5 ("arm64: dts: qcom: Add support for Huawei MateBook E 2019")
Fixes: 44acee2078 ("arm64: dts: qcom: Add Lenovo Yoga C630")
Fixes: d4b341269e ("arm64: dts: qcom: Add support for Samsung Galaxy Book2")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-5-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.88V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 3f72e2d3e6 ("arm64: dts: qcom: Add Dragonboard 845c")
Fixes: a678adbf2d ("arm64: dts: qcom: Add support for Pixel 3 and Pixel 3 XL")
Fixes: 28ae8aa392 ("arm64: dts: qcom: add device tree for LG G7 and LG V35")
Fixes: cfe10d38aa ("arm64: dts: qcom: sdm845-mtp: Add nodes for USB")
Fixes: d711b22eee ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Fixes: 4588245915 ("arm64: dts: qcom: sdm845: add device tree for SHIFT6mq")
Fixes: dd6459a089 ("arm64: dts: qcom: split beryllium dts into common dtsi and tianma dts")
Fixes: be497abe19 ("arm64: dts: qcom: Add support for Xiaomi Mi Mix2s")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-4-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on these boards, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 519183af39 ("arm64: dts: qcom: add SA8540P and ADP")
Fixes: 6be310347c ("arm64: dts: qcom: add SA8540P ride(Qdrive-3)")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-3-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB QMP PHYs on this board, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.
Fix it by swapping the two supplies back.
Fixes: 16a7fed117 ("arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-phy-supply-fix-v1-2-5880630cde3e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing power-domains property to associate DISPCC with CX rail.
This is to ensure the genpd performance state votes on the GDSC to get
propagated to the CX rail and to avoid the rail under-voltage conditions.
Fixes: a2b3209670 ("arm64: dts: qcom: qcm2290: Add display nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260718-shikra-dispcc-gpucc-v6-12-62703e05ef0f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add gpio-reserved-ranges property to the TLMM node for both Shikra
SoM variants (CQM and IQS). These reserved GPIOs are inaccessible
from the non-secure world and dedicated to fixed functions.
Co-developed-by: Anurag Pateriya <apateriy@qti.qualcomm.com>
Signed-off-by: Anurag Pateriya <apateriy@qti.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-10-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Shikra SoM cards include WCN3988 WiFi/Bluetooth chip, with supplies
provided by on-card PMICs. Enable both interfaces and provide the
required supply and calibration data.
Co-developed-by: Yepuri Siddu <yepuri.siddu@oss.qualcomm.com>
Signed-off-by: Yepuri Siddu <yepuri.siddu@oss.qualcomm.com>
Co-developed-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-9-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce the WiFi hardware description in shikra.dtsi, including
register space, interrupts, IOMMU configuration and reserved memory.
The node is kept disabled by default and is intended to be enabled
by board-specific device trees.
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-8-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The shikra includes one TSENS instance, with a total of 14 thermal
sensors distributed across various locations on the SoC.
The TSENS max/reset threshold is configured to 120°C in the hardware.
Enable all TSENS instances, and define the thermal zones with a hot trip
at 110°C and critical trip at 115°C.
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-7-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add CPU-to-DDR BWMON nodes and their corresponding opp tables for
Shikra SoC. This is necessary to enable power management and optimize
system performance from the perspective of dynamically changing DDR
frequencies.
Signed-off-by: Sayantan Chakraborty <sayantan.chakraborty@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-2-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree support for QUPv3 serial engine protocols on Shikra.
Shikra has 10 QUP serial engines under a single QUP wrapper, all with
support of GPI DMA engines.
Signed-off-by: Xueyao An <xueyao.an@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260803-shikra-dt-m1-v7-1-7fec8e777076@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Setting CCI supply clock rate to higher value of 37.5MHz allows to
program the controller to configure its I2C bus speed to Fast-mode plus.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260729112719.1151700-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the sound card on the Eliza CQS EVK platform, including the
WSA8845 external speaker path and DMIC microphone capture via VA macro.
Enable the required LPASS WSA macro, VA macro and SoundWire controller
along with the necessary pinctrl configurations for DMIC and WSA
SoundWire interfaces.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260731084032.3106477-3-ravi.hothi@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add SoC-level LPASS WSA macro, VA macro, SoundWire controller and LPASS
LPI pin controller nodes. DMIC and WSA SoundWire pinctrl states are
defined inside the LPASS LPI pin controller node. The hardware is similar
to the SM8750 platform.
The SoundWire controller is kept disabled so board DTS files can
selectively enable and configure it.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260731084032.3106477-2-ravi.hothi@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-20-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-19-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-18-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-17-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624190830.3131112-16-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
