In the 2021 board file removal, the gumstix and sharpsl
support was left around in order to make it easier to convert
more of the PXA platform to device tree, given that both
platforms had some level of support in qemu.
As far as I can tell, nobody has worked on additional DT
conversion in that time, and qemu has in turn deprecated
the entire PXA platform.
Schedule the remaining board files for removal now, as they
are unlikely to be of any help in the future. If anyone
wants to revive support for these machines, they can
obviously still contribute device tree based code and
work on updating the corresponding drivers.
Any drivers that are only usable on legacy PXA board files
can also get removed along with the boards, or saved by
adding devicetree support.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On ARMv4 and ARMv5, the default is still to build for OABI, with
CONFIG_AEABI disabled, even though distros and toolchains no longer
support OABI as a target.
Change the default to EABI for all architecture levels and change
the defconfig entries as follows:
- All machines that used to explicitly enable EABI can drop that line now
- Machines that are likely to actually use old distros and had NWFPE
enabled in combination with OABI (rpc, footrbridge, netwinder,
assabet, neponset) explicitly turn it on now.
- Machines that already had both EABI and NWFPE disabled in defconfig
(spear3xx, spear6xx) were likely not usable with either OABI or
EABI and now use EABI instead implicitly, making it more likely that
they could work.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> # OMAP
Acked-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The main change this time is a cleanup series from Krzysztof Kozlowski
that updates the defconfig files to be more in sync with changes to
the Kconfig files that moved options around or removed the completely.
In addition, a number of drivers get enabled, in order to support
more hardware out of the box, as usual.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmovyaAACgkQmmx57+YA
GNm7uw/+J91Gu+fM30dCblf4j5LgdbZAaMC3JNbVgznHBcBRUQcA/vTgzBZHP9x7
ihDjG+3KDVbJqqzMMIAsXtZzkWJzjQ/zK5qsLSFGeUC8aKtJiHo57kSaZbYrlU+9
UqdB4juV7CtMJwWQHfafm3hEarIvY+vrGGDRicfwDt6DcWAwgFMzkuLxXBdsHj/l
BMMTX+2bn9uIk6GBu+hHJFDP+74wIFVQy3xJzVEA989ETawLP7xyd+2sFKlca2k/
wH76UJF8fxeXdET1sqnhMSnPSGKzbhcnBho8J5MmRUF4mRFikYN8g7io+L7wuGUd
V477v2V+JGruoq19dWo/X2EXQtNE5dk17wqiMPsgEyYds1FRUhFOjnJSrrjEUp+e
vyMx2j0zTnyW/J309aZ8htkkFoW+gUUtEaeAnI0Cm6twTuI4ZyERCrJDGM61bPmi
2MzBvNvd3n94h/vnxGUvIiz0ZLEnzmkhXPWOBi2eG1TuLkZamilwvKUgQM+KKvAN
R/4WP2j9MJ9DQY+rw2n7w6/QEn6EQkcC9rpA3HLFu/o0It1Sfrs4WHlZWrekOBA6
ej/UxsZhQuJg/iHdQkwPVRDGE+NOMvpjLIyiZgWlEFsOiPDIFoV6lWRZzXNvsV79
FUh2A9p5q6Z9ShTPeKw4kEP2r++v2vMokMbtgzbJTAozDzchMTg=
=56zC
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"The main change this time is a cleanup series from Krzysztof Kozlowski
that updates the defconfig files to be more in sync with changes to
the Kconfig files that moved options around or removed the completely.
In addition, a number of drivers get enabled, in order to support more
hardware out of the box, as usual"
* tag 'soc-defconfig-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: enable BST SDHCI controller
arm64: configs: Update defconfig for AST2700 platform support
ARM: multi_v7_defconfig: Enable dma-buf heaps
ARM: configs: Drop duplicated CONFIG_EXT4_FS
arm64: defconfig: Enable DP83822 PHY driver
ARM: configs: at91: sama7: add sama7d65 i3c-hci
arm64: defconfig: Enable PCI M.2 power sequencing driver
arm64: defconfig: Enable CIX Sky1 pinctrl, PCIe host, and Cadence GPIO
ARM: multi_v7_defconfig: Correct QCOM_RPMH and QCOM_RPMHPD
ARM: multi_v7_defconfig: Cleanup redundant options
ARM: configs: Drop redundant SND_ATMEL_SOC
ARM: configs: Drop redundant I2C_DESIGNWARE_PLATFORM
ARM: multi_v7_defconfig: Move entries to match savedefconfig
arm64: defconfig: Switch Ethernet drivers to modules
arm64: defconfig: Drop unused Ethernet vendors
arm64: defconfig: Drop default or selected drivers
arm64: defconfig: Drop unused legacy netfilter options
arm64: defconfig: Move entries to match savedefconfig
pinctrl: qcom: Make important drivers default (2)
PCMCIA is almost completely obsolete (the last computers supporting it
natively were from ~2009), and the general consensus [1] seems to be
that support for it should be gradually removed from the kernel.
In 2023, an initial step of removing all the PCMCIA char drivers was
taken in commit 9b12f050c7 ("char: pcmcia: remove all the drivers"),
and that has not been reverted, so it seems logical to continue this
process by removing more low-hanging fruit.
These three Bluetooth drivers have had no meaningful changes since
their status was discussed in 2022 [2], and are unlikely to have any
remaining users. The latest functional change to any of them was a
patch to bluecard_cs to fix LED blinking behavior in 2017. The other
two drivers have not had any meaningful changes made since 2007. Remove
them.
Note that even with these drivers removed, it is still possible to use
other PCMCIA Bluetooth cards that present themselves as a standard
serial port via serial_cs and hciattach while the serial_cs driver is
still present.
[1] https://lore.kernel.org/all/c5b39544-a4fb-4796-a046-0b9be9853787@app.fastmail.com/
[2] https://lore.kernel.org/all/Y07d7rMvd5++85BJ@owl.dominikbrodowski.net/
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The only user of PCBC mode (Propagating Cipher Block Chaining mode) was
net/rxrpc/rxkad.c, which now uses local code instead.
While PCBC was an interesting cryptographic experiment, it has largely
been relegated to the history books and academic exercises. It is
non-parallelizable (i.e., very slow) and doesn't actually achieve the
integrity properties it was apparently intended to achieve.
Remove support for it from the crypto API.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-6-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the insecure FCrypt block cipher from the crypto API. Its only
user was net/rxrpc/, but now net/rxrpc/ implements it locally. The
crypto API implementation is no longer needed.
For some additional context: FCrypt was designed in 1988 and is
essentially a weakened version of DES. It has the same 56-bit key size
as DES, which is easily brute forced. Moreover, it's cryptographically
weak and doesn't even provide the intended 56-bit security level. Its
author considers it to be a mistake, as well
(https://lists.openafs.org/pipermail/openafs-devel/2000-December/005320.html).
But fortunately this 1980s-era homebrew block cipher was never adopted
outside of net/rxrpc/. So its code can just be kept there.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CONFIG_SND_ATMEL_SOC is gone since commit 4f30f84feb ("ASoC: atmel:
Standardize ASoC menu") and can be simply dropped without effect.
No impact on include/generated/autoconf.h.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I2C_DESIGNWARE_PLATFORM is default=y via I2C_DESIGNWARE_CORE, which is
enabled. No impact on include/generated/autoconf.h.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_FIRMWARE_EDID=y depends on X86 or EFI_GENERIC_STUB. Neither is
true here, so drop the lines from the defconfig files.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kevin Hilman (TI) <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20260401082533.214103-1-tzimmermann@suse.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move the ARM optimized single-block AES en/decryption code into
lib/crypto/, wire it up to the AES library API, and remove the
superseded "aes-arm" crypto_cipher algorithm.
The result is that both the AES library and crypto_cipher APIs are now
optimized for ARM, whereas previously only crypto_cipher was (and the
optimizations weren't enabled by default, which this fixes as well).
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
* Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
* Avoid a BUG_ON when opening a file on a maliciously corrupted file system
* Avoid mm warnings when freeing a very large orphan file metadata
* Avoid a theoretical races between metadata wrtteback and checkpoints.
(It's very hard to hit in practice, since the race requires that the
writeback take a very long time.)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmjvEgUACgkQ8vlZVpUN
gaPLXgf/UzjSmhiLSrvZ6IajGcCvwWI/j7aKL5sIbyz3Wqulz5SuMoZg3Vbi58sp
LJ6H0Ng8E7BCJa0EVf5YN24SAbfR+M4XSsIohjqo7OAXqin4SYSp6TjW9ex7dJmY
uUOHuNQ+r2MTGN2gi9bwgLEGZX5Yhn2jK01KCYb+mr/EMnmQ3iVilYViUd2xdeNv
xQY3+befzoaEtLe58qciPC1tZHFpIJvIj2g0mif3MO4t2zy5viQrn+v1l/CBRvL+
0ZqvAWa9q4GbLWqn62H/2YnIjHm/o437u7m9hExnG3Qhv7X3zhh0LGAZDmHxEO9n
zoNIJuYDhPb+8GfQXmDv/DkKFVXQNg==
=vCC5
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
Commit d6ace46c82 ("ext4: remove obsolete EXT3 config options")
removed the obsolete EXT3_CONFIG options, since it had been over a
decade since fs/ext3 had been removed. Unfortunately, there were a
number of defconfigs that still used CONFIG_EXT3_FS which the cleanup
commit didn't fix up. This led to a large number of defconfig test
builds to fail. Oops.
Fixes: d6ace46c82 ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The pxa_defconfig file defines CONFIG_USB_GPIO_VBUS twice, first as
built-in ('y') and then as a module ('m'). The kconfig system correctly
uses the last definition, but the duplication is confusing.
Remove the obsolete configuration to resolve the ambiguity and clean
up the configuration.
Fixes: 2002f39687 ("ARM: refresh defconfig files")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Instead of exposing the arm-optimized SHA-1 code via arm-specific
crypto_shash algorithms, instead just implement the sha1_blocks()
library function. This is much simpler, it makes the SHA-1 library
functions be arm-optimized, and it fixes the longstanding issue where
the arm-optimized SHA-1 code was disabled by default. SHA-1 still
remains available through crypto_shash, but individual architectures no
longer need to handle it.
To match sha1_blocks(), change the type of the nblocks parameter of the
assembly functions from int to size_t. The assembly functions actually
already treated it as size_t.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the arm-optimized SHA-512 code via arm-specific
crypto_shash algorithms, instead just implement the sha512_blocks()
library function. This is much simpler, it makes the SHA-512 (and
SHA-384) library functions be arm-optimized, and it fixes the
longstanding issue where the arm-optimized SHA-512 code was disabled by
default. SHA-512 still remains available through crypto_shash, but
individual architectures no longer need to handle it.
To match sha512_blocks(), change the type of the nblocks parameter of
the assembly functions from int to size_t. The assembly functions
actually already treated it as size_t.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160320.2888-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
* Samsung Exynos ACPM:
* Populate child platform devices from device tree data
* Introduce a new API, `devm_acpm_get_by_node()`, for child devices to get the ACPM handle
* ROHM PMICs:
* Add support for the ROHM BD96802 scalable companion PMIC to the BD96801 core driver
* Add support for controlling the BD96802 using the BD96801 regulator driver
* Add support to the BD96805, which is almost identical to the BD96801
* Add support to the BD96806, which is similar to the BD96802
* Maxim MAX77759:
* Add a core driver for the MAX77759 companion PMIC
* Add a GPIO driver for the expander functions on the MAX77759
* Add an NVMEM driver to expose the non-volatile memory on the MAX77759
* STMicroelectronics STM32MP25:
* Add support for the STM32MP25 SoC to the stm32-lptimer
* Add support for the STM32MP25 to the clocksource driver, handling new register access requirements
* Add support for the STM32MP25 to the PWM driver, enabling up to two PWM outputs
* Broadcom BCM590xx:
* Add support for the BCM59054 PMU
* Parse the PMU ID and revision to support behavioral differences between chip revisions
* Add regulator support for the BCM59054
* Samsung S2MPG10:
* Add support for the S2MPG10 PMIC, which communicates via the Samsung ACPM firmware instead of I2C
* Exynos ACPM:
* Improve timeout detection reliability by using ktime APIs instead of a loop counter assumption
* Allow PMIC access during late system shutdown by switching to `udelay()` instead of a sleeping function
* Fix an issue where reading command results longer than 8 bytes would fail
* Silence non-error `-EPROBE_DEFER` messages during boot to clean up logs
* Exynos LPASS:
* Fix an error handling path by switching to `devm_regmap_init_mmio()` to prevent resource leaks
* Fix a bug where `exynos_lpass_disable()` was called twice in the remove function
* Fix another resource leak in the probe's error path by using `devm_add_action_or_reset()`
* Samsung SEC:
* Handle the s2dos05, which does not have IRQ support, explicitly to prevent warnings
* Fix the core driver to correctly handle errors from `sec_irq_init()` instead of ignoring them
* STMPE-SPI:
* Correct an undeclared identifier in the `MODULE_DEVICE_TABLE` macro
* MAINTAINERS:
* Adjust a file path for the Siemens IPC LED drivers entry to fix a broken reference
* Maxim Drivers:
* Correct the spelling of "Electronics" in Samsung copyright headers across multiple files
* General:
* Fix wakeup source memory leaks on device unbind for 88pm886, as3722, max14577, max77541, max77705,
max8925, rt5033, and sprd-sc27xx drivers
* Samsung SEC Drivers:
* Split the driver into a transport-agnostic core (`sec-core`) and transport-specific (`sec-i2c`,
`sec-acpm`) modules to support non-I2C devices
* Merge the `sec-core` and `sec-irq` modules to reduce memory consumption
* Move internal APIs to a private header to clean up the public API
* Improve code style by sorting includes, cleaning up headers, sorting device tables, and using helper
macros like `dev_err_probe()`, `MFD_CELL`, and `REGMAP_IRQ_REG`
* Make regmap configuration for s2dos05/s2mpu05 explicit to improve clarity
* Rework platform data and regmap instantiation to use OF match data instead of a large switch statement
* ROHM BD96801/2:
* Prepare the driver for new models by separating chip-specific data into its own structure
* Drop IC name prefix from IRQ resource names in both the MFD and regulator drivers for simplification
* Broadcom BCM590xx:
* Refactor the regulator driver to store descriptions in a table to ease support for new chips
* Rename BCM59056-specific data to prepare for the addition of other regulators
* Use `dev_err_probe()` for cleaner error handling
* Exynos ACPM:
* Correct kerneldoc warnings and use the conventional 'np' argument name
* General MFD:
* Convert `aat2870` and `tps65010` to use the per-client debugfs directory provided by the I2C core
* Convert `sm501`, `tps65010` and `ucb1x00` to use the new GPIO line value setter callbacks
* Constify `regmap_irq_chip` and other structures in `88pm886` to move data to read-only sections
* BCM590xx:
* Drop the unused "id" member from the `bcm590xx` struct in preparation for a replacement
* Samsung SEC Core:
* Remove forward declarations for functions that no longer exist
* SM501:
* Remove the unused `sm501_find_clock()` function
* New Compatibles:
* Google: Add a PMIC child node to the `google,gs101-acpm-ipc` binding
* ROHM: Add new bindings for `rohm,bd96802-regulator` and `rohm,bd96802-pmic`, and add compatibles
for BD96805 and BD96806
* Maxim: Add new bindings for `maxim,max77759-gpio`, `maxim,max77759-nvmem`, and the top-level
`maxim,max77759`
* STM: Add `stm32mp25` compatible to the `stm32-lptimer` binding
* Broadcom: Add `bcm59054` compatible
* Atmel/Microchip: Add `microchip,sama7d65-gpbr` and `microchip,sama7d65-secumod` compatibles
* Samsung: Add `s2mpg10` compatible to the `samsung,s2mps11` MFD binding
* MediaTek: Add compatibles for `mt6893` (scpsys), `mt7988-topmisc`, and `mt8365-infracfg-nao`
* Qualcomm: Add `qcom,apq8064-mmss-sfpb` and `qcom,apq8064-sps-sic` syscon compatibles
* Refactoring & Cleanup:
* Convert Broadcom BCM59056 devicetree bindings to YAML and split them into MFD and regulator parts
* Convert the Microchip AT91 secumod binding to YAML
* Drop unrelated consumer nodes from binding examples to reduce bloat
* Correct indentation and style in various DTS examples
-----BEGIN PGP SIGNATURE-----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=hiAm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Samsung Exynos ACPM:
- Populate child platform devices from device tree data
- Introduce a new API, 'devm_acpm_get_by_node()', for child devices
to get the ACPM handle
ROHM PMICs:
- Add support for the ROHM BD96802 scalable companion PMIC to the
BD96801 core driver
- Add support for controlling the BD96802 using the BD96801 regulator
driver
- Add support to the BD96805, which is almost identical to the
BD96801
- Add support to the BD96806, which is similar to the BD96802
Maxim MAX77759:
- Add a core driver for the MAX77759 companion PMIC
- Add a GPIO driver for the expander functions on the MAX77759
- Add an NVMEM driver to expose the non-volatile memory on the
MAX77759
STMicroelectronics STM32MP25:
- Add support for the STM32MP25 SoC to the stm32-lptimer
- Add support for the STM32MP25 to the clocksource driver, handling
new register access requirements
- Add support for the STM32MP25 to the PWM driver, enabling up to two
PWM outputs
Broadcom BCM590xx:
- Add support for the BCM59054 PMU
- Parse the PMU ID and revision to support behavioral differences
between chip revisions
- Add regulator support for the BCM59054
Samsung S2MPG10:
- Add support for the S2MPG10 PMIC, which communicates via the
Samsung ACPM firmware instead of I2C
Exynos ACPM:
- Improve timeout detection reliability by using ktime APIs instead
of a loop counter assumption
- Allow PMIC access during late system shutdown by switching to
'udelay()' instead of a sleeping function
- Fix an issue where reading command results longer than 8 bytes
would fail
- Silence non-error '-EPROBE_DEFER' messages during boot to clean up
logs
Exynos LPASS:
- Fix an error handling path by switching to
'devm_regmap_init_mmio()' to prevent resource leaks
- Fix a bug where 'exynos_lpass_disable()' was called twice in the
remove function
- Fix another resource leak in the probe's error path by using
'devm_add_action_or_reset()'
Samsung SEC:
- Handle the s2dos05, which does not have IRQ support, explicitly to
prevent warnings
- Fix the core driver to correctly handle errors from
'sec_irq_init()' instead of ignoring them
STMPE-SPI:
- Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro
MAINTAINERS:
- Adjust a file path for the Siemens IPC LED drivers entry to fix a
broken reference
Maxim Drivers:
- Correct the spelling of "Electronics" in Samsung copyright headers
across multiple files
General:
- Fix wakeup source memory leaks on device unbind for 88pm886,
as3722, max14577, max77541, max77705, max8925, rt5033, and
sprd-sc27xx drivers
Samsung SEC Drivers:
- Split the driver into a transport-agnostic core ('sec-core') and
transport-specific ('sec-i2c', 'sec-acpm') modules to support
non-I2C devices
- Merge the 'sec-core' and 'sec-irq' modules to reduce memory
consumption
- Move internal APIs to a private header to clean up the public API
- Improve code style by sorting includes, cleaning up headers,
sorting device tables, and using helper macros like
'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG'
- Make regmap configuration for s2dos05/s2mpu05 explicit to improve
clarity
- Rework platform data and regmap instantiation to use OF match data
instead of a large switch statement
ROHM BD96801/2:
- Prepare the driver for new models by separating chip-specific data
into its own structure
- Drop IC name prefix from IRQ resource names in both the MFD and
regulator drivers for simplification
Broadcom BCM590xx:
- Refactor the regulator driver to store descriptions in a table to
ease support for new chips
- Rename BCM59056-specific data to prepare for the addition of other
regulators
- Use 'dev_err_probe()' for cleaner error handling
Exynos ACPM:
- Correct kerneldoc warnings and use the conventional 'np' argument
name
General MFD:
- Convert 'aat2870' and 'tps65010' to use the per-client debugfs
directory provided by the I2C core
- Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line
value setter callbacks
- Constify 'regmap_irq_chip' and other structures in '88pm886' to
move data to read-only sections
BCM590xx:
- Drop the unused "id" member from the 'bcm590xx' struct in
preparation for a replacement
Samsung SEC Core:
- Remove forward declarations for functions that no longer exist
SM501:
- Remove the unused 'sm501_find_clock()' function
New Compatibles:
- Google: Add a PMIC child node to the 'google,gs101-acpm-ipc'
binding
- ROHM: Add new bindings for 'rohm,bd96802-regulator' and
'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806
- Maxim: Add new bindings for 'maxim,max77759-gpio',
'maxim,max77759-nvmem', and the top-level 'maxim,max77759'
- STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding
- Broadcom: Add 'bcm59054' compatible
- Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and
'microchip,sama7d65-secumod' compatibles
- Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD
binding
- MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc',
and 'mt8365-infracfg-nao'
- Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic'
syscon compatibles
Refactoring & Cleanup:
- Convert Broadcom BCM59056 devicetree bindings to YAML and split
them into MFD and regulator parts
- Convert the Microchip AT91 secumod binding to YAML
- Drop unrelated consumer nodes from binding examples to reduce bloat
- Correct indentation and style in various DTS examples"
* tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits)
mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers
mfd: maxim: Correct Samsung "Electronics" spelling in headers
mfd: sm501: Remove unused sm501_find_clock
mfd: 88pm886: Constify struct regmap_irq_chip and some other structures
dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao
mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind
mfd: rt5033: Fix wakeup source leaks on device unbind
mfd: max8925: Fix wakeup source leaks on device unbind
mfd: max77705: Fix wakeup source leaks on device unbind
mfd: max77541: Fix wakeup source leaks on device unbind
mfd: max14577: Fix wakeup source leaks on device unbind
mfd: as3722: Fix wakeup source leaks on device unbind
mfd: 88pm886: Fix wakeup source leaks on device unbind
dt-bindings: mfd: Correct indentation and style in DTS example
dt-bindings: mfd: Drop unrelated nodes from DTS example
dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic
dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb
mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE
dt-bindings: mfd: syscon: Add mt7988-topmisc
mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe()
...
As a preparation for adding support for Samsung's S2MPG10, which is
connected via SPEEDY / ACPM rather than I2C, split out (move) all
I2C-specific driver code into its own kernel module, sec-i2c, and
make the existing sec-core module be just the transport-agnostic core
driver kernel module.
At the same time, update all defconfigs that reference the old kconfig
symbol name.
While at it, also update file header comments and module description(s)
to drop references to 'mfd', and update comments to be C-style, not
C++.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-8-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
There is no reason for people configuring the kernel to be asked about
CRYPTO_MANAGER, so make it a hidden symbol.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
tcrypt is actually a benchmarking module and not the actual tests. This
regularly causes confusion. Update the kconfig option name and help
text accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of providing crypto_shash algorithms for the arch-optimized
SHA-256 code, instead implement the SHA-256 library. This is much
simpler, it makes the SHA-256 library functions be arch-optimized, and
it fixes the longstanding issue where the arch-optimized SHA-256 was
disabled by default. SHA-256 still remains available through
crypto_shash, but individual architectures no longer need to handle it.
To merge the scalar, NEON, and CE code all into one module cleanly, add
!CPU_V7M as a direct dependency of the CE code. Previously, !CPU_V7M
was only a direct dependency of the scalar and NEON code. The result is
still the same because CPU_V7M implies !KERNEL_MODE_NEON, so !CPU_V7M
was already an indirect dependency of the CE code.
To match sha256_blocks_arch(), change the type of the nblocks parameter
of the assembly functions from int to size_t. The assembly functions
actually already treated it as size_t.
While renaming the assembly files, also fix the naming quirk where
"sha2" meant sha256. (SHA-512 is also part of SHA-2.)
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All modules that need CONFIG_CRC_T10DIF already select it, so there is no
need to bother users about the option.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
All modules that need CONFIG_CRC_CCITT already select it, so there is no
need to bother users about the option.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Remove the vmac64 template, as it has no known users. It also continues
to have longstanding bugs such as alignment violations (see
https://lore.kernel.org/r/20241226134847.6690-1-evepolonium@gmail.com/).
This code was added in 2009 by commit f1939f7c56 ("crypto: vmac - New
hash algorithm for intel_txt support"). Based on the mention of
intel_txt support in the commit title, it seems it was added as a
prerequisite for the contemporaneous patch
"intel_txt: add s3 userspace memory integrity verification"
(https://lore.kernel.org/r/4ABF2B50.6070106@intel.com/). In the design
proposed by that patch, when an Intel Trusted Execution Technology (TXT)
enabled system resumed from suspend, the "tboot" trusted executable
launched the Linux kernel without verifying userspace memory, and then
the Linux kernel used VMAC to verify userspace memory.
However, that patch was never merged, as reviewers had objected to the
design. It was later reworked into commit 4bd96a7a81 ("x86, tboot:
Add support for S3 memory integrity protection") which made tboot verify
the memory instead. Thus the VMAC support in Linux was never used.
No in-tree user has appeared since then, other than potentially the
usual components that allow specifying arbitrary hash algorithms by
name, namely AF_ALG and dm-integrity. However there are no indications
that VMAC is being used with these components. Debian Code Search and
web searches for "vmac64" (the actual algorithm name) do not return any
results other than the kernel itself, suggesting that it does not appear
in any other code or documentation. Explicitly grepping the source code
of the usual suspects (libell, iwd, cryptsetup) finds no matches either.
Before 2018, the vmac code was also completely broken due to using a
hardcoded nonce and the wrong endianness for the MAC. It was then fixed
by commit ed331adab3 ("crypto: vmac - add nonced version with big
endian digest") and commit 0917b87312 ("crypto: vmac - remove insecure
version with hardcoded nonce"). These were intentionally breaking
changes that changed all the computed MAC values as well as the
algorithm name ("vmac" to "vmac64"). No complaints were ever received
about these breaking changes, strongly suggesting the absence of users.
The reason I had put some effort into fixing this code in 2018 is
because it was used by an out-of-tree driver. But if it is still needed
in that particular out-of-tree driver, the code can be carried in that
driver instead. There is no need to carry it upstream.
Cc: Atharva Tiwari <evepolonium@gmail.com>
Cc: Shane Wang <shane.wang@intel.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Deprecation period of reiserfs ends with the end of this year so it is
time to remove it from the kernel.
Acked-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
SLUB is now the only remaining allocator after the SLAB removal and it
was the default already before that, so no need to mention it in the
defconfig files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As part of general housekeeping, change the defconfig files to
sort lines based on the 'make savedefconfig' output, to make
it easier to do additional changes on top.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AR7 is going to be removed from the Kernel, so remove its support for
MTD.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is only one Kconfig user of CONFIG_EMBEDDED and it can be switched
to EXPERT or "if !ARCH_MULTIPLATFORM" (suggested by Arnd).
Link: https://lkml.kernel.org/r/20230816055010.31534-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [RISC-V]
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit a2225d931f ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As usual, this branch contains all the patches to enable options
for newly added device drivers in the 32-bit and 64-bit defconfig
files.
I have sorted the files according to the changes to Kconfig files,
to make it easier to check what has changed compared to the 'make
savedefconfig' output.
The most notable change this time is a series from Mark Brown
to add a 'virtconfig' target for arm64, which is for the moment
the same as the 'defconfig' target but disables all the top-level
SoC specific options in order to have a smaller and faster
kernel build.
-----BEGIN PGP SIGNATURE-----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=48oI
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfigs updates from Arnd Bergmann:
"As usual, this contains all the patches to enable options for newly
added device drivers in the 32-bit and 64-bit defconfig files.
I have sorted the files according to the changes to Kconfig files,
to make it easier to check what has changed compared to the 'make
savedefconfig' output.
The most notable change this time is a series from Mark Brown to add
a 'virtconfig' target for arm64, which is for the moment the same as
the 'defconfig' target but disables all the top-level SoC specific
options in order to have a smaller and faster kernel build"
* tag 'soc-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
arm64: defconfig: Enable DisplayPort on SC8280XP laptops
arm64: configs: Add virtconfig
kbuild: Provide a version of merge_into_defconfig without override warnings
scripts: merge_config: Add option to suppress warning on overrides
ARM: reorder defconfig files
arm64: reorder defconfig
arm64: defconfig: enable Qualcomm SDAM nvmem driver
arm64: defconfig: enable SM8450 DISPCC clock driver
ARM: defconfig: Add IOSCHED_BFQ to the default configs
ARM: configs: multi_v7: enable NVMEM driver for STM32
ARM: Add wpcm450_defconfig for Nuvoton WPCM450
arm64: defconfig: Enable DMA_RESTRICTED_POOL
arm64: defconfig: Enable missing configs for mt8192-asurada
riscv: defconfig: Enable the Allwinner D1 platform and drivers
ARM: imx_v6_v7_defconfig: Don't enable PROVE_LOCKING
ARM: multi_v7_defconfig: Add GXP Fan and SPI support
ARM: add multi_v7_lpae_defconfig
kbuild: Add config fragment merge functionality
ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
...
The majority of all pxa board files has not been touched in a long time,
and no users have spoken up in favor of keeping them around. This leaves
only support for the platforms that were already converted to DT, as
well as the gumstix and spitz/akita/borzoi machines that work in qemu
and can still be converted to DT later.
Cc: Ales Bardorfer <ales@i-tech.si>
Cc: Ales Snuparek <snuparek@atlas.cz>
Cc: Alex Osborne <ato@meshy.org>
Cc: Alex Osborne <bobofdoom@gmail.com>
Cc: Dirk Opfer <dirk@opfer-online.de>
Cc: Ian Molton <spyro@f2s.com>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Michael Petchkovsky <mkpetch@internode.on.net>
Cc: Nick Bane <nick@cecomputing.co.uk>
Cc: Paul Parsons <lost.distance@yahoo.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Tomas Cech <sleep_walker@suse.cz>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As explained in [1], we would like to remove SLOB if possible.
- There are no known users that need its somewhat lower memory footprint
so much that they cannot handle SLUB (after some modifications by the
previous patches) instead.
- It is an extra maintenance burden, and a number of features are
incompatible with it.
- It blocks the API improvement of allowing kfree() on objects allocated
via kmem_cache_alloc().
As the first step, rename the CONFIG_SLOB option in the slab allocator
configuration choice to CONFIG_SLOB_DEPRECATED. Add CONFIG_SLOB
depending on CONFIG_SLOB_DEPRECATED as an internal option to avoid code
churn. This will cause existing .config files and defconfigs with
CONFIG_SLOB=y to silently switch to the default (and recommended
replacement) SLUB, while still allowing SLOB to be configured by anyone
that notices and needs it. But those should contact the slab maintainers
and linux-mm@kvack.org as explained in the updated help. With no valid
objections, the plan is to update the existing defconfigs to SLUB and
remove SLOB in a few cycles.
To make SLUB more suitable replacement for SLOB, a CONFIG_SLUB_TINY
option was introduced to limit SLUB's memory overhead.
There is a number of defconfigs specifying CONFIG_SLOB=y. As part of
this patch, update them to select CONFIG_SLUB and CONFIG_SLUB_TINY.
[1] https://lore.kernel.org/all/b35c3f82-f67b-2103-7d82-7a7ba7521439@suse.cz/
Cc: Russell King <linux@armlinux.org.uk>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Conor Dooley <conor@kernel.org>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> # OMAP1
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> # riscv k210
Acked-by: Arnd Bergmann <arnd@arndb.de> # arm
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
linux-next for a couple of months without, to my knowledge, any negative
reports (or any positive ones, come to that).
- Also the Maple Tree from Liam R. Howlett. An overlapping range-based
tree for vmas. It it apparently slight more efficient in its own right,
but is mainly targeted at enabling work to reduce mmap_lock contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
(https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
This has yet to be addressed due to Liam's unfortunately timed
vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down to
the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
=xfWx
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
According to https://www.kernel.org/doc/html/latest/timers/no_hz.html,
CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer
kernels, so let's reflect that in the 32-bit ARM defconfigs.
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The debug-info and can subystem options have moved around in the
'savedefconfig' output, so fix these up to reduce the clutter
from the savedefconfig command.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).
Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.
The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
General setup --->
Platform selection --->
Kernel Features --->
Boot options --->
Power management options --->
CPU Power Management --->
[*] ACPI (Advanced Configuration and Power Interface) Support --->
[*] Virtualization --->
[*] ARM Accelerated Cryptographic Algorithms --->
(or)
[*] ARM64 Accelerated Cryptographic Algorithms --->
...
-*- Cryptographic API --->
Library routines --->
Kernel hacking --->
and moves into the Cryptographic API menu, which now contains:
...
Accelerated Cryptographic Algorithms for CPU (arm) --->
(or)
Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*] Hardware crypto devices --->
...
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Most of the traditional board files are no longer used by anyone and
will be removed next year, while the DT based machine support remains.
Adding a CONFIG_ATAGS dependency around all the board files means
that they now actaully get disabled when ATAGS support is left out,
and the individual boards that have no known users are marked
as depending on CONFIG_UNUSED_BOARD_FILES, with the plan to remove
them in early 2023 unless someone else shows interest.
Laurence de Bruxelles intends to work on converting the Spitz/Akita/Borzoi
family of Sharp Zaurus SL machines to DT, to make that easier those
remain for the moment.
In addition, the "Gumstix" machine is the one that is supported in
qemu with 256MB of RAM, which makes it particularly nice for testing,
I'm leaving it in hoping that someone can take care of converting it to
DT as well.
Finally, Marc Zyngier is still able to test the Zeus and Viper machines,
so these could be saved as well if anyone wants to conver them to DT.
This seems less likely, so I'm marking them as unused for the time being.
For the defconfig files, both the pxa3xx_defconfig and pxa_defconfig
now only enable the boards that are not marked as unused, while all the
other ones explicitly enable CONFIG_UNUSED_BOARD_FILES to still allow
building the kernels.
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Laurence de Bruxelles <lfdebrux@gmail.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The default is always 0x0 after commit 39c3e30456 ("ARM: 8984/1:
Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"), so any
defconfig file that has these two lines can now drop them to reduce
the diff against the 'make savedefconfig' version.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A couple of ARM defconfig files (and one for sh) still refer to the
IRDA options that were removed in linux-4.14. Remove the entries
as well now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.
I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PXA is now ready to be built into a single kernel with all the
other ARMv5 platforms, so change the Kconfig bit to finish it
off. The mach/uncompress.h support is the last bit that goes away,
getting replaced with the normal DEBUG_LL based approach.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I have no reason to believe these boards have any more users and I
haven't tested them for several years. Removing them may simplify
other changes to the various PXA boards people still care about.
The recent conversion of pxa2xx_spi to GPIO descriptors for example
had to update this board despite no one caring or testing.
Great boards that got me started in kernel development, RIP!
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: soc@kernel.org
Link: https://lore.kernel.org/r/20220227134431.908998-1-jic23@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This config was removed so remove all references to it.
Fixes: 76a3c92ec9 ("cifs: remove support for NTLM and weaker authentication algorithms")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Steve French <smfrench@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [arch/arm/configs]
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This CONFIG option was removed in commit 278b13ce3a ("Input: remove
input_polled_dev implementation") so there's no point to keep it in
defconfigs any longer.
Get rid of the leftover for all arches.
Link: https://lkml.kernel.org/r/20210726074741.1062-1-yuzenghui@huawei.com
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
