Add explanation of fwsec with diagrams. This helps clarify how the
nova-core falcon boot works.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-7-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
devinit is mentioned in the code. This patch explains it so it is clear
what it does. devinit is not only essential at boot-time, but also at
runtime due to suspend-resume and things like re-clocking.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-6-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add detailed explanation and block diagrams of the layout of the vBIOS
on Nvidia GPUs. This is important to understand how nova-core boots an
Nvidia GPU.
[ Applied Timur Tabi's feedback on providing link to BIT documentation. ]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-5-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
drm/i915 feature pull #2 for v6.17:
Features and functionality:
- Add drm_panic support for both i915 and xe drivers (Jocelyn Falempe)
- Add initial flip queue implementation, disabled by default, for LNL and PTL
(Ville)
- Add support for Wildcat Lake (WCL) display, version 30.02 (Matt Roper, Matt
Atwood, Dnyaneshwar)
- Extend drm_panel and follower support to DDI eDP (Arun)
Refactoring and cleanups:
- Make all global state objects opaque (Jani)
- Move display works to display specific unordered workqueue (Luca)
- Add and use struct drm_device based pcode interface (Jani, Lucas)
- Use clamp() instead of max()+min() combo (Ankit)
- Simplify wait for power well disable (Jani)
- Various stylistics cleanups and renames (Jani)
Fixes:
- Deal with loss of pipe DMC state (Ville)
- Fix PTL HDCP2 stream status check (Suraj)
- Add workaround for ADL-P DKL PHY DP and HDMI (Nemesa)
- Fix skl_print_wm_changes() stack usage with KMSAN (Arnd Bergmann)
- Fix PCON capability reads on non-branch devices (Chaitanya)
- Fix which platforms have ultra joiner (Ankit)
DRM core changes:
- Add ttm_bo_kmap_try_from_panic() for xe drm_panic support (Jocelyn Falempe)
- Add private pointer to struct drm_scanout buffer for xe/i915 drm_panic support
(Jocelyn Falempe)
Merges:
- Backmerge drm-next for drm_panel and xe changes (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6d728bf6ef23681b00dfbc7da9aeae41042dee02@intel.com
Provide the lower level code for PIPEDMC based flip queue.
We'll use the so called semi-full flip queue mode where the
PIPEDMC will start the provided DSB on a scanline a little
ahead of the vblank. We need to program the triggering scanline
early enough so that the DSB has enough time to complete writing
all the double buffered registers before they get latched (at
start of vblank).
The firmware implements several queues:
- 3 "plane queues" which execute a single DSB per entry
- 1 "general queue" which can apparently execute 2 DSBs per entry
- 1 vestigial "fast queue" that replaced the "simple flip queue"
on ADL+, but this isn't supposed to be used due to issues.
But we only need a single plane queue really, and we won't actually
use it as a real queue because we don't allow queueing multiple commits
ahead of time. So the whole thing is perhaps useless. I suppose
there migth be some power saving benefits if we would get the flip
scheduled by userspace early and then could keep some hardware powered
off a bit longer until the DMC kicks off the flipq programming. But that
is pure speculation at this time and needs to be proven.
The code to hook up the flip queue into the actual atomic commit
path will follow later.
TODO: need to think how to do the "wait for DMC firmware load" nicely
need to think about VRR and PSR
etc.
v2: Don't write DMC_FQ_W2_PTS_CFG_SEL on pre-lnl
Don't oops at flipq init if there is no dmc
v3: Adapt to PTL+ flipq changes (different queue entry
layout, different trigger event, need VRR TG)
Use the actual CDCLK frequency
Ask the DSB code how long things are expected to take
v3: Adjust the cdclk rounding (docs are 100% vague, Windows
rounds like this)
Initialize some undocumented magic DMC variables on PTL
v4: Use PIPEDMC_FQ_STATUS for busy check (the busy bit in
PIPEDMC_FQ_CTRL is apparently gone on LNL+)
Based the preempt timeout on the max exec time
Preempt before disabling the flip queue
Order the PIPEDMC_SCANLINECMP* writes a bit more carefully
Fix some typos
v5: Try to deal with some clang-20 div-by-zero false positive (Nathan)
Add some docs (Jani)
Cc: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
epr
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-5-ville.syrjala@linux.intel.com
The migration functionality and track-keeping of per-pagemap VRAM
mapped to the CPU mm is not per GPU_vm, but rather per pagemap.
This is also reflected by the functions not needing the drm_gpusvm
structures. So move to drm_pagemap.
With this, drm_gpusvm shouldn't really access the page zone-device-data
since its meaning is internal to drm_pagemap. Currently it's used to
reject mapping ranges backed by multiple drm_pagemap allocations.
For now, make the zone-device-data a void pointer.
Alter the interface of drm_gpusvm_migrate_to_devmem() to ensure we don't
pass a gpusvm pointer.
Rename CONFIG_DRM_XE_DEVMEM_MIRROR to CONFIG_DRM_XE_PAGEMAP.
Matt is listed as author of this commit since he wrote most of the code,
and it makes sense to retain his git authorship.
Thomas mostly moved the code around.
v3:
- Kerneldoc fixes (CI)
- Don't update documentation about how the drm_pagemap
migration should be interpreted until upcoming
patches where the functionality is implemented.
(Matt Brost)
v4:
- More kerneldoc fixes around timeslice_ms
(Himal Ghimiray, Matt Brost)
v6:
- Fix an uninitialized pagemap pointer (CI)
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250619134035.170086-2-thomas.hellstrom@linux.intel.com
[Why]
Brightness programming may involve a conversion of a user requested
brightness against what was in a custom brightness curve. The values
might not match what a user programmed.
[How]
Add a new trace event to show specific converted brightness values.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250623171114.1156451-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A few new dependencies are required to remove some of the TODO items:
- A way to safely convert from byte slices to types implementing
`FromBytes`,
- A way to obtain slices and write into a `CoherentAllocation`,
- Several improvements to the `register!()` macro,
- Alignment operations to powers of two, and an equivalent to the C
`fls`,
- Support for `xa_alloc` in the XAlloc bindings.
Some items have also become obsolete:
- The auxiliary bus abstractions have been implemented and are in use,
- The ELF utilities are not considered for being part of the core kernel
bindings anymore.
- VBIOS, falcon and GPU timer have been completed.
We now have quite a few TODO entries in the code, so annotate them with
a 4 letter code representing the corresponding task in `todo.rst`. This
allows to easily find which part of the code corresponds to a given
entry (and conversely).
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-24-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
UAPI Changes:
- Add Task Information for the wedge API
Cross-subsystem Changes:
Core Changes:
- Fix warnings related to export.h
- fbdev: Make CONFIG_FIRMWARE_EDID available on all architectures
- fence: Fix UAF issues
- format-helper: Improve tests
Driver Changes:
- ivpu: Add turbo flag, Add Wildcat Lake Support
- rz-du: Improve MIPI-DSI Support
- vmwgfx: fence improvement
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaFOwgQAKCRAnX84Zoj2+
dkbjAX9aGa2vGeoz9fiT4wMMvxWzLSW7EzJW9oC/iFitHOcmd0yUZCfdmUfukQ3T
cXtVHFcBf3clQ1iI4fV8EQwLOEaBpQ1H642/41pAebXOr9kQ6JOQ4AqhJBqamJzv
teGbWnA2+w==
=inwC
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2025-06-19' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.17:
UAPI Changes:
- Add Task Information for the wedge API
Cross-subsystem Changes:
Core Changes:
- Fix warnings related to export.h
- fbdev: Make CONFIG_FIRMWARE_EDID available on all architectures
- fence: Fix UAF issues
- format-helper: Improve tests
Driver Changes:
- ivpu: Add turbo flag, Add Wildcat Lake Support
- rz-du: Improve MIPI-DSI Support
- vmwgfx: fence improvement
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250619-perfect-industrious-whippet-8ed3db@houat
- Expose media OA units (Ashutosh)
Merge:
- Restore GuC submit UAF fix around queue destruction
accidentally removed in a drm-xe-fixes merge (Auld)
Core Changes:
- drm/gpusvm: Introduce devmem_only flag for allocation (Himal)
- drm/gpusvm: Add timeslicing support to GPU SVM (Brost)
Driver Changes:
- Make gem shrinker drm managed (Thomas)
- SRIOV VF Post-migration recovery of GGTT nodes and CTB (Tomasz)
- Some W/A additions and updates (Aradhya, Shekhar, Vinay, Daniele)
- Prefetch Support for svm ranges (Himal, Brost)
- Don't allocate managed BO for each policy change (Michal)
- Simplify and fix diff calculation in GuC submit (Lucas)
- Track FAST_REQ GuC H2Gs to report where errors came from (John)
- SRIOV PF: Don't allow LMEM provisioning if LMTT isn't available (Piotr)
- Check if all domains awake for MOCS dump (Tejas)
- Make creation of SLPC debugfs files conditional (Aradhya)
- Default auto_link_downgrade status to false (Aradhya)
- Use xe_mmio_read32() to read mtcfg register (Shuicheng)
- Updates in PCI ID tables (Atwood, Shekhar)
- SRIOV VF: Fail migration recovery if fixups needed but not supported (Tomasz)
- Add missing documentation around freq and RPa (Rodrigo)
- Some other SVM related fixes (Himal, Auld, Brost, Maarten)
- Allow to trigger GT resets using debugfs writes (Michal)
- Optimise CCS case for WB pages (Auld)
- Create LRC BO without VM (Niranjana)
- Initialize MOCS index early (Bala)
- HWMON fixes for BMG (Karthik, Lucas)
- Drop redundant conversion to bool (Raag)
- Rework eviction rejection of bound external bos (Thomas)
- Stop re-submitting signalled jobs (Auld)
- Small fixes and cleanups for PXP (Daniele)
- Convert some print messages to GT-oriented ones (Michal)
- Resend potentially lost GuC H2G MMIO request (Michal)
- Add configfs to load with fewer engines (Lucas)
- Remove unmatched xe_vm_unlock from __xe_exec_queue_init (Maciej)
- SRIOV VF: Small updates around GGTT handling (Michal)
- Make VMA tile_present, tile_invalidated access rules clear (Brost)
- Xe3 Tuning: Disable NULL query for Anyhit Shader (Nitin)
- Fixes for VF GuC version (Daniele)
- Don't store the xe device pointer inside xe_ttm_tt (Dave)
- Small improvements in topology code (Michal)
- Stop relying on GGTT internals (Maarten)
- GSM size should be constant on most platforms (Roper)
- Reorder 'Get pages failed' message (Brost)
- WA BB related fixes and improvements (Lucas, Brost)
- Fix early wedge on GuC load failure (Daniele)
- Add helper function to inject fault into ct_dead_capture (Satyanarayana)
- Determine ATS / PTA programming during early sw init (Roper)
- Consolidate PAT programming logic for pre-Xe2 and post-Xe2 (Roper)
- Fix kconfig prompt (Lucas)
- Convert xe_pci tests to parametrized tests (Michal)
- Do not kill VM in PT code on -ENODATA (Brost)
- Move LRC_ENGINE_ID_PPHWSP_OFFSET outside of parallel offset (Brost)
- Enable media OA (Ashutosh)
- GuC log level tuning (Lucas)
- Add xe_vm_has_valid_gpu_mapping helper (Brost)
- Opportunistically skip TLB invalidaion on unbind (Brost)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmhTGwcACgkQ+mJfZA7r
E8odlwf6A6bfNDdj56gMjxK/tyS3ud5VV6nAiCyHoGtcMeN6rZE2dDHOI3rP1fH7
6urnx6DqZu6lA1o1NJaidyc11WLlqB3hJN+tAVZChVe8N65syvpxdz38wZbJxrfQ
MKw4uB8GfhNroQXuZcj+0dF+Ru/UqCbSAL7f1PMajAf4AcPBu/Ju7EYc2ALnINt1
jx+TOm1fOIMpA/Cw3DmGL3Uy/MtYRnnASp+qU4xSv/y8en7+83HDoKbC7+nY5NG0
j06O0QK2QeRTnltdvmbTlpjwQ+1ztyA1JS+pqj+QjyQ8iLfZaUQzED3iWAiMayn7
5A8zHkW02+v0pkFTFn2C4HShANAeHg==
=Jq5v
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-06-18' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose media OA units (Ashutosh)
Merge:
- Restore GuC submit UAF fix around queue destruction
accidentally removed in a drm-xe-fixes merge (Auld)
Core Changes:
- drm/gpusvm: Introduce devmem_only flag for allocation (Himal)
- drm/gpusvm: Add timeslicing support to GPU SVM (Brost)
Driver Changes:
- Make gem shrinker drm managed (Thomas)
- SRIOV VF Post-migration recovery of GGTT nodes and CTB (Tomasz)
- Some W/A additions and updates (Aradhya, Shekhar, Vinay, Daniele)
- Prefetch Support for svm ranges (Himal, Brost)
- Don't allocate managed BO for each policy change (Michal)
- Simplify and fix diff calculation in GuC submit (Lucas)
- Track FAST_REQ GuC H2Gs to report where errors came from (John)
- SRIOV PF: Don't allow LMEM provisioning if LMTT isn't available (Piotr)
- Check if all domains awake for MOCS dump (Tejas)
- Make creation of SLPC debugfs files conditional (Aradhya)
- Default auto_link_downgrade status to false (Aradhya)
- Use xe_mmio_read32() to read mtcfg register (Shuicheng)
- Updates in PCI ID tables (Atwood, Shekhar)
- SRIOV VF: Fail migration recovery if fixups needed but not supported (Tomasz)
- Add missing documentation around freq and RPa (Rodrigo)
- Some other SVM related fixes (Himal, Auld, Brost, Maarten)
- Allow to trigger GT resets using debugfs writes (Michal)
- Optimise CCS case for WB pages (Auld)
- Create LRC BO without VM (Niranjana)
- Initialize MOCS index early (Bala)
- HWMON fixes for BMG (Karthik, Lucas)
- Drop redundant conversion to bool (Raag)
- Rework eviction rejection of bound external bos (Thomas)
- Stop re-submitting signalled jobs (Auld)
- Small fixes and cleanups for PXP (Daniele)
- Convert some print messages to GT-oriented ones (Michal)
- Resend potentially lost GuC H2G MMIO request (Michal)
- Add configfs to load with fewer engines (Lucas)
- Remove unmatched xe_vm_unlock from __xe_exec_queue_init (Maciej)
- SRIOV VF: Small updates around GGTT handling (Michal)
- Make VMA tile_present, tile_invalidated access rules clear (Brost)
- Xe3 Tuning: Disable NULL query for Anyhit Shader (Nitin)
- Fixes for VF GuC version (Daniele)
- Don't store the xe device pointer inside xe_ttm_tt (Dave)
- Small improvements in topology code (Michal)
- Stop relying on GGTT internals (Maarten)
- GSM size should be constant on most platforms (Roper)
- Reorder 'Get pages failed' message (Brost)
- WA BB related fixes and improvements (Lucas, Brost)
- Fix early wedge on GuC load failure (Daniele)
- Add helper function to inject fault into ct_dead_capture (Satyanarayana)
- Determine ATS / PTA programming during early sw init (Roper)
- Consolidate PAT programming logic for pre-Xe2 and post-Xe2 (Roper)
- Fix kconfig prompt (Lucas)
- Convert xe_pci tests to parametrized tests (Michal)
- Do not kill VM in PT code on -ENODATA (Brost)
- Move LRC_ENGINE_ID_PPHWSP_OFFSET outside of parallel offset (Brost)
- Enable media OA (Ashutosh)
- GuC log level tuning (Lucas)
- Add xe_vm_has_valid_gpu_mapping helper (Brost)
- Opportunistically skip TLB invalidaion on unbind (Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aFMb_NVF_oCW7UVl@intel.com
Add a section about "Task information" for the wedge API.
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-5-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
GSP message queue docs has been moved following RPC handling split in
commit 8a8b1ec526 ("drm/nouveau/gsp: split rpc handling out on its
own"), before GSP-RM implementation is versioned in commit c472d82834
("drm/nouveau/gsp: move subdev/engine impls to subdev/gsp/rm/r535/").
However, the kernel-doc reference in nouveau docs is left behind, which
triggers htmldocs warnings:
ERROR: Cannot find file ./drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c
WARNING: No kernel-doc for file ./drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c
Update the reference.
Fixes: c472d82834 ("drm/nouveau/gsp: move subdev/engine impls to subdev/gsp/rm/r535/")
Fixes: 8a8b1ec526 ("drm/nouveau/gsp: split rpc handling out on its own")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250611020805.22418-2-bagasdotme@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add the internal configfs API like is done with other parts of the
driver. Also ensure the correct number of '=' chars are used for the
header.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250528-engine-mask-v4-5-f4636d2a890a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----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=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
The documentation was created with the creation of the component,
however it has never been actually shown in the actual Documentation.
While doing this, fixes the identation style, to avoid new warnings
while building htmldocs.
Fixes: bef52b5c7a ("drm/xe: Create a xe_gt_freq component for raw management and sysfs")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250521165146.39616-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit af53f0fd99)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Now that we have KUnit tests, add instructions on how to run them.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250415-yuv-v18-7-f2918f71ec4b@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
VKMS has support for YUV formats now. Remove the task from the TODO
list.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250415-yuv-v18-4-f2918f71ec4b@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
This commit adds a document section in drm-uapi.rst about tracepoints,
and mark the events gpu_scheduler_trace.h as stable uAPI.
The goal is to explicitly state that tools can rely on the fields,
formats and semantics of these events.
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250526125505.2360-10-pierre-eric.pelloux-prayer@amd.com
The documentation was created with the creation of the component,
however it has never been actually shown in the actual Documentation.
While doing this, fixes the identation style, to avoid new warnings
while building htmldocs.
Fixes: bef52b5c7a ("drm/xe: Create a xe_gt_freq component for raw management and sysfs")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250521165146.39616-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
devm_drm_put_bridge() is a temporary workaround waiting for the panel
bridge lifetime rework. Add a TODO entry to not forget it must be removed
after such rework.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-22-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Documentation/userspace-api/media/glossary.rst:170: WARNING: duplicate term description of SPI, other instance in gpu/amdgpu/amdgpu-glossary
That's because SPI of amdgpu (Shader Processor Input) shares the same
global glossary term as SPI of media subsystem (which is Serial
Peripheral Interface Bus). Disambiguate the former from the latter to
fix the warning.
Note that adding context qualifiers in the term is strictly necessary
in order to make Sphinx happy.
Fixes: dd3d035a78 ("Documentation/gpu: Add new entries to amdgpu glossary")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250509185845.60bf5e7b@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the register!() macro, which defines a given register's layout and
provide bit-field accessors with a way to convert them to a given type.
This macro will allow us to make clear definitions of the registers and
manipulate their fields safely.
The long-term goal is to eventually move it to the kernel crate so it
can be used by other drivers as well, but it was agreed to first land it
into nova-core and make it mature there.
To illustrate its usage, use it to define the layout for the Boot0
(renamed to NV_PMC_BOOT_0 to match OpenRM's naming scheme) and take
advantage of its accessors.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250507-nova-frts-v3-5-fcb02749754d@nvidia.com
[ Fix typo in commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add a description for the get_csb_buffer callback, update the glossary,
and add some extra information about RB, which is associated with CSB
configuration.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix drm_gpusvm kernel-doc (Lucas)
Driver Changes:
- Release guc ids before cancelling work (Tejas)
- Remove a duplicated pc_start_call (Rodrigo)
- Fix an incorrect assert in previous userptr fixes (Thomas)
- Remove gen11 assertions and prefixes (Lucas)
- Drop sentinels from arg to xe_rtp_process_to_src (Lucas)
- Temporarily disable D3Cold on BMG (Rodrigo)
- Fix MOCS debugfs LNCF readout (Tvrtko)
- Some ring flush cleanups (Tvrtko)
- Use unsigned int for alignment in fb pinning code (Tvrtko)
- Retry and wait longer for GuC PC start (Rodrigo)
- Recognize 3DSTATE_COARSE_PIXEL in LRC dumps (Matt Roper)
- Remove reduntant check in xe_vm_create_ioctl() (Xin)
- A bunch of SRIOV updates (Michal)
- Add stats for SVM page-faults (Francois)
- Fix an UAF (Harish)
- Expose fan speed (Raag)
- Fix exporting xe buffer objects multiple times (Tomasz)
- Apply a workaround (Vinay)
- Simplify pinned bo iteration (Thomas)
- Remove an incorrect "static" keywork (Lucas)
- Add support for separate firmware files on each GT (Lucas)
- Survivability handling fixes (Lucas)
- Allow to inject error in early probe (Lucas)
- Fix unmet direct dependencies warning (Yue Haibing)
- More error injection during probe (Francois)
- Coding style fix (Maarten)
- Additional stats support (Riana)
- Add fault injection for xe_oa_alloc_regs (Nakshrtra)
- Add a BMG PCI ID (Matt Roper)
- Some SVM fixes and preliminary SVM multi-device work (Thomas)
- Switch the migrate code from drm managed to dev managed (Aradhya)
- Fix an out-of-bounds shift when invalidating TLB (Thomas)
- Ensure fixed_slice_mode gets set after ccs_mode change (Niranjana)
- Use local fence in error path of xe_migrate_clear (Matthew Brost)
- More Workarounds (Julia)
- Define sysfs_ops on all directories (Tejas)
- Set power state to D3Cold during s2idle/s3 (Badal)
- Devcoredump output fix (John)
- Avoid plain 64-bit division (Arnd Bergmann)
- Reword a debug message (John)
- Don't print a hwconfig error message when forcing execlists (Stuart)
- Restore an error code to avoid a smatch warning (Rodrigo)
- Invalidate L3 read-only cachelines for geometry streams too (Kenneth)
- Make PPHWSP size explicit in xe_gt_lrc_size() (Gustavo)
- Add GT frequency events (Vinay)
- Fix xe_pt_stage_bind_walk kerneldoc (Thomas)
- Add a workaround (Aradhya)
- Rework pinned save/restore (Matthew Auld, Matthew Brost)
- Allow non-contig VRAM kernel BO (Matthew Auld)
- Support non-contig VRAM provisioning for SRIOV (Matthew Auld)
- Allow scratch-pages for unmapped parts of page-faulting VMs. (Oak)
- Ensure XE_BO_FLAG_CPU_ADDR_MIRROR had a unique value (Matt Roper)
- Fix taking an invalid lock on wedge (Lucas)
- Configs and documentation for survivability mode (Riana)
- Remove an unused macro (Shuicheng)
- Work around a page-fault full error (Matt Brost)
- Enable a SRIOV workaround (John)
- Bump the recommended GuC version (John)
- Allow to drop VRAM resizing (Lucas)
- Don't expose privileged debugfs files if VF (Michal)
- Don't show GGTT/LMEM debugfs files under media GT (Michal)
- Adjust ring-buffer emission for maximum possible size (Tvrtko)
- Fix notifier vs folio lock deadlock (Matthew Auld)
- Stop relying on placement for dma-buf unmap Matthew Auld)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCaADVdgAKCRC4FpNVCsYG
vwhhAP95latf9GQChxq3th3z42uVe6YH0GxdorbgHvbrPkW9NwD+OjKNCe9BjADT
3T1uC+Lf0MkN4kJwIHp9tS0imyh0AgI=
=U5BC
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-04-17' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Core Changes:
Fix drm_gpusvm kernel-doc (Lucas)
Driver Changes:
- Release guc ids before cancelling work (Tejas)
- Remove a duplicated pc_start_call (Rodrigo)
- Fix an incorrect assert in previous userptr fixes (Thomas)
- Remove gen11 assertions and prefixes (Lucas)
- Drop sentinels from arg to xe_rtp_process_to_src (Lucas)
- Temporarily disable D3Cold on BMG (Rodrigo)
- Fix MOCS debugfs LNCF readout (Tvrtko)
- Some ring flush cleanups (Tvrtko)
- Use unsigned int for alignment in fb pinning code (Tvrtko)
- Retry and wait longer for GuC PC start (Rodrigo)
- Recognize 3DSTATE_COARSE_PIXEL in LRC dumps (Matt Roper)
- Remove reduntant check in xe_vm_create_ioctl() (Xin)
- A bunch of SRIOV updates (Michal)
- Add stats for SVM page-faults (Francois)
- Fix an UAF (Harish)
- Expose fan speed (Raag)
- Fix exporting xe buffer objects multiple times (Tomasz)
- Apply a workaround (Vinay)
- Simplify pinned bo iteration (Thomas)
- Remove an incorrect "static" keywork (Lucas)
- Add support for separate firmware files on each GT (Lucas)
- Survivability handling fixes (Lucas)
- Allow to inject error in early probe (Lucas)
- Fix unmet direct dependencies warning (Yue Haibing)
- More error injection during probe (Francois)
- Coding style fix (Maarten)
- Additional stats support (Riana)
- Add fault injection for xe_oa_alloc_regs (Nakshrtra)
- Add a BMG PCI ID (Matt Roper)
- Some SVM fixes and preliminary SVM multi-device work (Thomas)
- Switch the migrate code from drm managed to dev managed (Aradhya)
- Fix an out-of-bounds shift when invalidating TLB (Thomas)
- Ensure fixed_slice_mode gets set after ccs_mode change (Niranjana)
- Use local fence in error path of xe_migrate_clear (Matthew Brost)
- More Workarounds (Julia)
- Define sysfs_ops on all directories (Tejas)
- Set power state to D3Cold during s2idle/s3 (Badal)
- Devcoredump output fix (John)
- Avoid plain 64-bit division (Arnd Bergmann)
- Reword a debug message (John)
- Don't print a hwconfig error message when forcing execlists (Stuart)
- Restore an error code to avoid a smatch warning (Rodrigo)
- Invalidate L3 read-only cachelines for geometry streams too (Kenneth)
- Make PPHWSP size explicit in xe_gt_lrc_size() (Gustavo)
- Add GT frequency events (Vinay)
- Fix xe_pt_stage_bind_walk kerneldoc (Thomas)
- Add a workaround (Aradhya)
- Rework pinned save/restore (Matthew Auld, Matthew Brost)
- Allow non-contig VRAM kernel BO (Matthew Auld)
- Support non-contig VRAM provisioning for SRIOV (Matthew Auld)
- Allow scratch-pages for unmapped parts of page-faulting VMs. (Oak)
- Ensure XE_BO_FLAG_CPU_ADDR_MIRROR had a unique value (Matt Roper)
- Fix taking an invalid lock on wedge (Lucas)
- Configs and documentation for survivability mode (Riana)
- Remove an unused macro (Shuicheng)
- Work around a page-fault full error (Matt Brost)
- Enable a SRIOV workaround (John)
- Bump the recommended GuC version (John)
- Allow to drop VRAM resizing (Lucas)
- Don't expose privileged debugfs files if VF (Michal)
- Don't show GGTT/LMEM debugfs files under media GT (Michal)
- Adjust ring-buffer emission for maximum possible size (Tvrtko)
- Fix notifier vs folio lock deadlock (Matthew Auld)
- Stop relying on placement for dma-buf unmap Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aADWaEFKVmxSnDLo@fedora
Add survivability mode document to pcode document as it is enabled
when pcode detects a failure.
v2: fix kernel-doc (Lucas)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250407051414.1651616-3-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Registers a configfs subsystem called 'xe' that creates a
directory in the mounted configfs directory (/sys/kernel/config)
Userspace can then create the device that has to be configured
under the xe directory
mkdir /sys/kernel/config/xe/0000:03:00.0
The device created will have the following attributes to be
configured
/sys/kernel/config/xe/
.. 0000:03:00.0/
... survivability_mode
v2: fix kernel-doc
fix return value (Lucas)
v3: fix kernel-doc (Lucas)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250407051414.1651616-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This adds the UAPI for the Asahi driver targeting the GPU in the Apple
M1 and M2 series systems on chip. The UAPI design is based on other
modern Vulkan-capable drivers, including Xe and Panthor. Memory
management is based on explicit VM management. Synchronization is
exclusively explicit sync.
This UAPI is validated against our open source Mesa stack, which is
fully conformant to the OpenGL 4.6, OpenGL ES 3.2, OpenCL 3.0, and
Vulkan 1.4 standards. The Vulkan driver supports sparse, exercising the
VM_BIND mechanism.
This patch adds the standalone UAPI header. It is implemented by an open
source DRM driver written in Rust. We fully intend to upstream this
driver when possible. However, as a production graphics driver, it
depends on a significant number of Rust abstractions that will take a
long time to upstream. In the mean time, our userspace is upstream in
Mesa but is not allowed to probe with upstream Mesa as the UAPI is not
yet reviewed and merged in the upstream kernel. Although we ship a
patched Mesa in Fedora Asahi Remix, any containers shipping upstream
Mesa builds are broken for our users, including upstream Flatpak and
Waydroid runtimes. Additionally, it forces us to maintain forks of Mesa
and virglrenderer, which complicates bisects.
The intention in sending out this patch is for this UAPI to be
thoroughly reviewed. Once we as the DRM community are satisfied with the
UAPI, this header lands signifying that the UAPI is stable and must only
be evolved in backwards-compatible ways; it will be the UAPI implemented
in the DRM driver that eventually lands upstream. That promise lets us
enable upstream Mesa, solving all these issues while the upstream Rust
abstractions are developed.
https://github.com/alyssarosenzweig/linux/commits/agx-uapi-v7 contains
the DRM driver implementing this proposed UAPI.
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33984 contains
the Mesa patches to implement this proposed UAPI.
That Linux and Mesa branch together give a complete graphics/compute
stack on top of this UAPI.
Co-developed-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Janne Grunau <j@jannau.net>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://lore.kernel.org/r/20250408-agx-uapi-v7-1-ad122d4f7324@rosenzweig.io
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
In reference to memory carved out for APUs,
s/cave out/carve out/
Reviewed-by: shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES is an important firmware that lacks some essential documentation.
This commit introduces an overview of it and how it works.
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC is a large block that plays a vital role for amdgpu; for this reason,
this commit creates one specific page for GC and adds extra information
about the CP component.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pipes and Queues are two common vocabulary that pervades discussions
around amdgpu core features. The definition and explanation of those
components are spread around multiple places in the code, mailing list,
and Gitlab, which sometimes leads to the wrong interpretation of these
concepts. This commit attempts to centralize the definition and
explanation of Pipe and Queue from amdgpu perspective in a kernel doc.
Most of the information in this doc was derived from:
- https://lore.kernel.org/amd-gfx/CADnq5_Pcz2x4aJzKbVrN3jsZhD6sTydtDw=6PaN4O3m4t+Grtg@mail.gmail.com/T/#m9a670b55ab20e0f7c46c80f802a0a4be255a719d
- https://gitlab.freedesktop.org/mesa/mesa/-/issues/11759
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The APU and dGPU tables are hidden in the driver misc info, which makes
it hard to find specific hardware info when users need it. This commit
creates a single page for this information and adds it to the top of the
amdgpu list to improve searchability.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since driver-core has an overview of the AMD GPU hardware structure, it
makes more sense to keep it first. This commit move driver-core up in
the index list.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces some new acronyms extracted from the source code
and found on some web pages around the internet (most of them came from
ArchLinux, Gentoo, and Wikipedia links).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Describes what debugfs files are available and what
they are used for.
v2: fix some typos (Mark Glines)
v3: Address comments from Siqueira and Kent
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Due to wrong `.. kernel-doc` directive in Documentation/gpu/rfc/gpusvm.rst
the documentation was actually not parsing anything from
drivers/gpu/drm/drm_gpusvm.c. This fixes the kernel-doc include and all
warnings/errors created when doing so.
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/intel-xe/20250307195239.57abcd2d@canb.auug.org.au/
Fixes: 99624bdff8 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307-fix-svm-kerneldoc-v2-1-03c74b199620@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4da1fb61e0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We have enabled PROVE_LOCKING (which enables LOCKDEP) in drm-ci.
This will output warnings when kernel locking errors are encountered
and will continue executing tests. To detect if lockdep has been
triggered, check the debug_locks value in /proc/lockdep_stats after
the tests have run. When debug_locks is 0, it indicates that lockdep
has detected issues and turned itself off. Check this value, and if
lockdep is detected, exit with an error and configure it as a warning
in GitLab CI.
GitLab CI ignores exit codes other than 1 by default. Pass the correct
exit code with variable FF_USE_NEW_BASH_EVAL_STRATEGY set to true or
exit on failure.
Also update the documentation.
Acked-by: Helen Koike <helen.fornazier@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217053719.442644-4-vignesh.raman@collabora.com
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
- Expose per-engine activity via perf pmu (Riana, Lucas, Umesh)
- Add support for EU stall sampling (Harish, Ashutosh)
- Allow userspace to provide low latency hint for submission (Tejas)
- GPU SVM and Xe SVM implementation (Matthew Brost)
Cross-subsystem Changes:
- devres handling for component drivers (Lucas)
- Backmege drm-next to allow cross dependent change with i915
- GPU SVM and Xe SVM implementation (Matthew Brost)
Core Changes:
Driver Changes:
- Fixes to userptr and missing validations (Matthew Auld, Thomas
Hellström, Matthew Brost)
- devcoredump typos and error handling improvement (Shuicheng)
- Allow oa_exponent value of 0 (Umesh)
- Finish moving device probe to devm (Lucas)
- Fix race between submission restart and scheduled being freed (Tejas)
- Fix counter overflows in gt_stats (Francois)
- Refactor and add missing workarounds and tunings for pre-Xe2 platforms
(Aradhya, Tvrtko)
- Fix PXP locks interaction with exec queues being killed (Daniele)
- Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper)
- Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez)
- New workarounds for Panther Lake (Tejas)
- Fix VF resume errors (Satyanarayana)
- Fix workaround infra skipping some workarounds dependent on engine
initialization (Tvrtko)
- Improve per-IP descriptors (Gustavo)
- Add more error injections to probe sequence (Francois)
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE6rM8lpABPHM5FqyDm6KlpjDL6lMFAmfKozEZHGx1Y2FzLmRl
bWFyY2hpQGludGVsLmNvbQAKCRCboqWmMMvqU5FND/4yORxEWj5G2pEw5RZLcsXp
riXowTKbxUA9+fmTbMK/YCgFotVa4Jh+/wk+a2obI06YQflS6B4ZJtIIljQvGV2H
rNps2dEmw5Xqf/RIj3aWJ5XmOB71vvgHBmfYMNIghoZMFZ5J54z1baMCX1wS+w61
rb6M6N88u29VuecyPq7NdD0TuIm67mrV8h0uQCQJv6iJWlZ7yhsyhlP0jPE663SJ
ktuWLskwS3HqX56ITy9v/MQz0pmh3i8qRTgI2hcmbV0Fq5KJd1OBVF3BYYElUhHL
9600ab3oGwpWgd1KTC/THy75YlL4KmGgSQihvEiE02NOUSWkqTWhRd3Ahb9MgCcy
0LMFm32xVk0ERlqbW+AjHDxK8YecCpQ/fI2+lLKQqs9fEY192R1+23JxNgpi+R7I
ez8G3MABLLsGmu5gTLljDtinxlAf6ost7eCgmSjLvAz6HTHOnn7XbI82mKOW7C97
VScEMq0uvtTpJXHdtbynbk4rRMZI54S7cZIEmL70WG7j190qjktTuv+xkwBqiRk/
/s5iHlAAds6tr9WuS4i8ywg32kcx5rh71u2kB2je6hEeDK6pq3zjsBOuBpizUyXT
hBILOPvUgS9FhnmSXo04JGh6ivKfknJw8v7Fho8nXcfAX4aZWiTbywgQgR/5WL/e
O+XOBFPibNYGujeXjhsaQg==
=98mS
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-03-07' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose per-engine activity via perf pmu (Riana, Lucas, Umesh)
- Add support for EU stall sampling (Harish, Ashutosh)
- Allow userspace to provide low latency hint for submission (Tejas)
- GPU SVM and Xe SVM implementation (Matthew Brost)
Cross-subsystem Changes:
- devres handling for component drivers (Lucas)
- Backmege drm-next to allow cross dependent change with i915
- GPU SVM and Xe SVM implementation (Matthew Brost)
Core Changes:
Driver Changes:
- Fixes to userptr and missing validations (Matthew Auld, Thomas
Hellström, Matthew Brost)
- devcoredump typos and error handling improvement (Shuicheng)
- Allow oa_exponent value of 0 (Umesh)
- Finish moving device probe to devm (Lucas)
- Fix race between submission restart and scheduled being freed (Tejas)
- Fix counter overflows in gt_stats (Francois)
- Refactor and add missing workarounds and tunings for pre-Xe2 platforms
(Aradhya, Tvrtko)
- Fix PXP locks interaction with exec queues being killed (Daniele)
- Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper)
- Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez)
- New workarounds for Panther Lake (Tejas)
- Fix VF resume errors (Satyanarayana)
- Fix workaround infra skipping some workarounds dependent on engine
initialization (Tvrtko)
- Improve per-IP descriptors (Gustavo)
- Add more error injections to probe sequence (Francois)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ilc5jvtyaoyi6woyhght5a6sw5jcluiojjueorcyxbynrcpcjp@mw2mi6rd6a7l
Update the Documentation to be more precise.
v2: Update for clarity
v3: Further details in Todo
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/640856/?series=144073&rev=5
Add the initial documentation of the Nova project.
The initial project documentation consists out of a brief introduction
of the project, as well as project guidelines both general and nova-core
specific and a task list for nova-core specifically.
The task list is divided into tasks for general Rust infrastructure
required by the project, tasks regarding GSP enablement and firmware
abstraction, general GPU driver tasks as well as tasks related to
external API design and test infrastructure.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250306222336.23482-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
There can be multiple cases of handling the GSP RPC messages, which are
the reply of GSP RPC commands according to the requirement of the
callers and the nature of the GSP RPC commands.
The current supported reply policies are "callers don't care" and "receive
the entire message" according to the requirement of the callers. To
introduce a new policy, factor out the current RPC command reply polices.
Also, centralize the handling of the reply in a single function.
Factor out NVKM_GSP_RPC_REPLY_NOWAIT as "callers don't care" and
NVKM_GSP_RPC_REPLY_RECV as "receive the entire message". Introduce a
kernel doc to document the policies. Factor out
r535_gsp_rpc_handle_reply().
No functional change is intended for small GSP RPC commands. For large GSP
commands, the caller decides the policy of how to handle the returned GSP
RPC message.
Cc: Ben Skeggs <bskeggs@nvidia.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227013554.8269-2-zhiw@nvidia.com
Add documentation for agree upon GPU SVM design principles, current
status, and future plans.
v4:
- Address Thomas's feedback
v5:
- s/Current/Basline (Thomas)
v7:
- Add license (CI)
- Add examples for design guideline reasoning (Alistair)
- Add snippet about possible livelock with concurrent GPU and and CPU
access (Alistair)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Alistair Popple <apopple@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-33-matthew.brost@intel.com
Some items were defined in both the general and DC glossaries.
Remove the duplicate entries.
Fixes: 2df30ae0ba ("Documentation/gpu: Add acronyms for some firmware components")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DRM and KMS frameworks and helpers gain more and more kunit
coverage, so let's document what our expectations are.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113101100.1373856-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Users can check the file "/sys/kernel/debug/dri/0/amdgpu_firmware_info"
to get information on the firmware loaded in the system. This file has
multiple acronyms that are not documented in the glossary. This commit
introduces some missing acronyms to the AMD glossary documentation. The
meaning of each acronym in this commit was extracted from code
documentation available in the following files:
- drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c
- drivers/gpu/drm/amd/include/amd_shared.h
Changes since v1:
- Expand acronym meanings based on Alex Deucher suggestions.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A previous commit enabled display of driver-internal kernel BO sizes
through the device file's fdinfo interface.
Expand the description of the relevant driver-specific key:value pairs
with the definitions of the new panthor-*-memory ones.
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130172851.941597-5-adrian.larumbe@collabora.com
This change reflects de facto usage by amdgpu, as exemplified by commit
d6530c33a9 ("drm/amdgpu: expose more memory stats in fdinfo").
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130172851.941597-2-adrian.larumbe@collabora.com
In order to explain the name clean-ups in GSP RPC routines, a kernel
doc to explain the memory layout and terms is required.
Add a kernel doc to introduce the GSP RPC.
Cc: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
[ Fix bullet list indentation; add SPDX-License-Identifier. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-2-zhiw@nvidia.com
This introduces a new cgroup controller to limit the device memory.
Notable users would be DRM, dma-buf heaps, or v4l2.
This pull request is based on the series developped by Maarten
Lankhorst, Friedrich Vock, and I:
https://lore.kernel.org/all/20241204134410.1161769-1-dev@lankhorst.se/
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZ4DhogAKCRAnX84Zoj2+
dj7bAYCnLgOut9i0JawJdrx9wzUV6fpZCt8BGnEDeE0snlKCN/7ETTOtmBqojYrR
Hwmts70BfA06NadFtMV+t6QrNOsjkk1JBPvCbSKZJK2KF7qN9Z5s8DTgw1F9rlaM
dwCAMDduRQ==
=F5bE
-----END PGP SIGNATURE-----
Merge tag 'cgroup-dmem-drm-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
DMEM cgroup pull request
This introduces a new cgroup controller to limit the device memory.
Notable users would be DRM, dma-buf heaps, or v4l2.
This pull request is based on the series developped by Maarten
Lankhorst, Friedrich Vock, and I:
https://lore.kernel.org/all/20241204134410.1161769-1-dev@lankhorst.se/
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110-cryptic-warm-mandrill-b71f5d@houat
This code is based on the RDMA and misc cgroup initially, but now
uses page_counter. It uses the same min/low/max semantics as the memory
cgroup as a result.
There's a small mismatch as TTM uses u64, and page_counter long pages.
In practice it's not a problem. 32-bits systems don't really come with
>=4GB cards and as long as we're consistently wrong with units, it's
fine. The device page size may not be in the same units as kernel page
size, and each region might also have a different page size (VRAM vs GART
for example).
The interface is simple:
- Call dmem_cgroup_register_region()
- Use dmem_cgroup_try_charge to check if you can allocate a chunk of memory,
use dmem_cgroup__uncharge when freeing it. This may return an error code,
or -EAGAIN when the cgroup limit is reached. In that case a reference
to the limiting pool is returned.
- The limiting cs can be used as compare function for
dmem_cgroup_state_evict_valuable.
- After having evicted enough, drop reference to limiting cs with
dmem_cgroup_pool_state_put.
This API allows you to limit device resources with cgroups.
You can see the supported cards in /sys/fs/cgroup/dmem.capacity
You need to echo +dmem to cgroup.subtree_control, and then you can
partition device memory.
Co-developed-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Co-developed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20241204143112.1250983-1-dev@lankhorst.se
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Define how to handle buffers with multiple possible placement so we
don't get incompatible implementations. Callout the resident requirement
for drm-purgeable- explicitly. Remove the requirement for there to be
only drm-memory- or only drm-resident-, it's not what's implemented and
having both is better for back-compat. Also re-order the paragraphs to
flow better.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-4-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Panels using a PWM-controlled backlight source do not have a standard
way to communicate their valid PWM ranges.
On x86 the ranges are read from ACPI through driver-specific tables.
The built-in ranges are not necessarily correct, or may grow stale if an
older device can be retrofitted with newer panels.
Add a quirk infrastructure with which the minimum valid backlight value
can be maintained as part of the kernel.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111-amdgpu-min-backlight-quirk-v7-1-f662851fda69@weissschuh.net
This feature enables process isolation on the graphics engine by
serializing access to it and adding a cleaner shader which clears LDS
(Local Data Store) and GPRs (General Purpose Registers) between jobs.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Together with the feature to enable or disable zero RPM in the last
commit, it also makes sense to expose the OD setting determining under
which temperature the fan should stop if zero RPM is enabled.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Whilst we have support for setting fan curves there is no support for
disabling the zero RPM feature. Since the relevant bits are already
present in the OverDriveTable, hook them up to a sysctl setting so users
can influence this behaviour.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3489
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a documentation page to detail the device coredump as implemented by
xe - it was documented in the source code, but not visible in the
rendered (html) documentation.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241102161254.1818604-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Updates for v6.13
Core:
- Switch to aperture_remove_all_conflicting_devices()
- Simplify msm_disp_state_dump_regs()
DPU:
- Add SA8775P support
- Add (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996
support
- Enable support for larger framebuffers (required for X.Org working
with several outputs)
- Dropped LM_3, LM_4 (MSM8998, SDM845)
- Fixed DSPP_3 routing on SDM845
DP:
- Add SA8775P support
HDMI:
- Mark two arrays as const in MSM8998 HDMI PHY driver
GPU:
- a7xx preemption support
- Adreno A663 support
- Typos fixes, etc
- Fix excessive stack usage in a6xx GMU
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt7k8zDHsg2Uzx9apzyQMut8XdLXMQSRNn7WArdPUV5Qw@mail.gmail.com
drm-misc-next for v6.13:
All of the previous pull request, with MORE!
Core Changes:
- Update documentation for scheduler start/stop and job init.
- Add dedede and sm8350-hdk hardware to ci runs.
Driver Changes:
- Small fixes and cleanups to panfrost, omap, nouveau, ivpu, zynqmp, v3d,
panthor docs, and leadtek-ltk050h3146w.
- Crashdump support for qaic.
- Support DP compliance in zynqmp.
- Add Samsung S6E88A0-AMS427AP24 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/deeef745-f3fb-4e85-a9d0-e8d38d43c1cf@linux.intel.com
Fix Panthor documentation build errors uncovered by the makedocs target
when building with extra warnings enabled.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: 6a797bdfde ("drm/panthor: add sysfs knob for enabling job profiling")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009214346.2308917-1-adrian.larumbe@collabora.com
Add a debugfs interface for exercising the various test modes supported
by the DisplayPort controller. This allows performing compliance
testing, or performing signal integrity measurements on a failing link.
At the moment, we do not support sink-driven link quality testing,
although such support would be fairly easy to add.
Additionally, add some debugfs files for ignoring AUX errors and HPD
events, as this can allow testing with equipment that cannot emulate a
DPRX.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
[Tomi: fixed a few minor formatting issues]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-9-sean.anderson@linux.dev
One of the challenges to contributing to the display code is the
complexity of the DC component. This commit adds a documentation page
that discusses the programming model used by DCN and an overview of how
the display code is organized.
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu driver is composed of multiple components, each of which can
be a source of some specific problem that the user/developer can see.
This commit introduces steps to narrow down and collect display
information.
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The kernel-doc comments in these 3 files was removed so remove the
references to these files to prevent kernel-doc warnings.
drivers/gpu/drm/drm_fbdev_dma.c:1: warning: no structured comments found
drivers/gpu/drm/drm_fbdev_shmem.c:1: warning: no structured comments found
drivers/gpu/drm/drm_fbdev_ttm.c:1: warning: no structured comments found
Fixes: 731fddf430 ("drm/fbdev-dma: Remove obsolete setup function")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241002142250.07e1c46c@canb.auug.org.au/
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017024813.61908-1-rdunlap@infradead.org
A number of DRM-client functions serve as entry points from device
operations to client code. Moving them info a separate file will later
allow for a more fine-grained kernel configuration. For most of the
users it is sufficient to include <drm/drm_client_event.h> instead of
the full driver-side interface in <drm/drm_client.h>
v2:
- rename new files to drm_client_event.{c,h}
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014085740.582287-7-tzimmermann@suse.de
The DRM aperture helpers are wrappers around video helpers from
<linux/aperture.h>. There are no callers of these functions. Remove
them entirely.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930130921.689876-29-tzimmermann@suse.de
drm-misc-next for v6.13:
UAPI Changes:
- Add drm fdinfo support to panthor, and add sysfs knob to toggle.
Cross-subsystem Changes:
- Convert fbdev drivers to use backlight power constants.
- Some small dma-fence fixes.
- Some kernel-doc fixes.
Core Changes:
- Small drm client fixes.
- Document requirements that you need to file a bug before marking a test as flaky.
- Remove swapped and pinned bo's from TTM lru list.
Driver Changes:
- Assorted small fixes to panel/elida-kd35t133, nouveau, vc4, imx.
- Fix some bridges to drop cached edids on power off.
- Add Jenson BL-JT60050-01A, Samsung s6e3ha8 & AMS639RQ08 panels.
- Make 180° rotation work on ilitek-ili9881c, even for already-rotated
panels.
-
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/panthor/panthor_drv.c
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8dc111ca-d20c-4e0d-856e-c12d208cbf2a@linux.intel.com
drm-misc-next for v6.12:
UAPI Changes:
- Add panthor/DEV_QUERY_TIMESTAMP_INFO query.
Cross-subsystem Changes:
- Updated dt bindings.
- Add documentation explaining default errnos for fences.
- Mark dma-buf heaps creation functions as __init.
Core Changes:
- Split DSC helpers from DP helpers.
- Clang build fixes for drm/mm test.
- Remove simple pipeline support for gem-vram,
no longer any users left after converting bochs.
- Add erno to drm_sched_start to distinguish between GPU and queue
reset.
- Add drm_framebuffer testcases.
- Fix uninitialized spinlock acquisition with CONFIG_DRM_PANIC=n.
- Use read_trylock instead of read_lock in dma_fence_begin_signalling to
quiesce lockdep.
Driver Changes:
- Assorted small fixes and updates for tegra, host1x, imagination,
nouveau, panfrost, panthor, panel/ili9341, mali, exynos,
panel/samsung-s6e3fa7, ast, bridge/ti-sn65dsi86, panel/himax-hx83112a,
bridge/tc358767, bridge/imx8mp-hdmi-tx, panel/khadas-ts050,
panel/nt36523, panel/sony-acx565akm, kmb, accel/qaic, omap, v3d.
- Add bridge/TI TDP158.
- Assorted documentation updates.
- Convert bochs from simple drm to gem shmem, and check modes
against available memory.
- Many VC4 fixes, most related to scaling and YUV support.
- Convert some drivers to use SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS.
- Rockchip 4k@60 support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/445713a6-2427-4c53-8ec2-3a894ec62405@linux.intel.com
Add an optional drm-client-name field to drm fdinfo's output.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003124506.470931-3-pierre-eric.pelloux-prayer@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Currently it is not well defined what is drm-memory- compared to other
categories.
In practice the only driver which emits these keys is amdgpu and in them
exposes the current resident buffer object memory (including shared).
To prevent any confusion, document that drm-memory- is deprecated and an
alias for drm-resident-memory-.
While at it also clarify that the reserved sub-string 'memory' refers to
the memory region component, and also clarify the intended semantics of
other memory categories.
v2:
* Also mark drm-memory- as deprecated.
* Add some more text describing memory categories. (Alex)
v3:
* Semantics of the amdgpu drm-memory is actually as drm-resident.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.keonig@amd.com>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add documentation about the preemption feature supported by the msm
driver.
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618032/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Update the documentation to specify linking to a relevant GitLab
issue or email report for each new flake entry. Added specific
GitLab issue urls for amdgpu, i915, msm and xe driver.
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> #intel and xe
Acked-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # msm
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930095255.2071586-1-vignesh.raman@collabora.com
This commit introduces a DRM device sysfs attribute that lets UM control
the job accounting status in the device. The knob variable had been brought
in as part of a previous commit, but now we're able to fix it manually.
As sysfs files are part of a driver's uAPI, describe its legitimate input
values and output format in a documentation file.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923230912.2207320-6-adrian.larumbe@collabora.com
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler;
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp: add support for BOE NE140WUM-N6G; revert support for
SDC ATNA45AF01
- visionox-vtdr6130: improve error handling; use
devm_regulator_bulk_get_const()
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
support Innolux G070ACE-LH3 plus DT bindings
support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings
- st7701:
decouple DSI and DRM code
add SPI support
support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop: Support RGB display on Rockchip RK3066; Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset
-----BEGIN PGP SIGNATURE-----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=7jR+
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"This adds a couple of patches outside the drm core, all should be
acked appropriately, the string and pstore ones are the main ones that
come to mind.
Otherwise it's the usual drivers, xe is getting enabled by default on
some new hardware, we've changed the device number handling to allow
more devices, and we added some optional rust code to create QR codes
in the panic handler, an idea first suggested I think 10 years ago :-)
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler:
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp:
- add support for BOE NE140WUM-N6G
- revert support for SDC ATNA45AF01
- visionox-vtdr6130:
- improve error handling
- use devm_regulator_bulk_get_const()
- boe-th101mb31ig002:
- Support for starry-er88577 MIPI-DSI panel plus DT
- Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da:
- Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
- Refactor for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
- support Innolux G070ACE-LH3 plus DT bindings
- support On Tat Industrial Company KD50G21-40NT-A1 plus DT
bindings
- st7701:
- decouple DSI and DRM code
- add SPI support
- support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop:
- Support RGB display on Rockchip RK3066
- Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc:
- Fix transparency after disabling plane
- Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset"
* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
drm/xe/xe2hpg: Add Wa_15016589081
drm/xe: Don't keep stale pointer to bo->ggtt_node
drm/xe: fix missing 'xe_vm_put'
drm/xe: fix build warning with CONFIG_PM=n
drm/xe: Suppress missing outer rpm protection warning
drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/i915/bios: fix printk format width
drm/i915/display: Fix BMG CCS modifiers
drm/amdgpu: get rid of bogus includes of fdtable.h
drm/amdkfd: CRIU fixes
drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
drm: new helper: drm_gem_prime_handle_to_dmabuf()
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
...
That would be rather nice to have and the kernel side is really trivial,
only the userspace side might be a bit more complex.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826122541.85663-4-christian.koenig@amd.com
Different approaches have been tried to signal resets and other errors in
vendor specific ways which not only resulted in a wide variety of
implementations but also repeating the same bugs and problems over different
drivers.
Document that drivers should use dma_fence based error signaling which is
vendor agnostic and allows userspace to query submission errors in generic
non-vendor specific code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826122541.85663-3-christian.koenig@amd.com
Also fix a few places in gpu docs that are still relevant, and add a
bunch of .mailmap entries.
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
[Why]
Idle power states (IPS) describe levels of power-gating within DCN. DM
and DC is responsible for ensuring that we are out of IPS before any DCN
programming happens. Any DCN programming while we're in IPS leads to
undefined behavior (mostly hangs).
Because IPS intersects with all display features, the ability to disable
IPS by default while ironing out the known issues is desired. However,
disabing it completely will cause important features such as s0ix entry
to fail.
Therefore, more granular IPS debug flags are desired.
[How]
Extend the dc debug mask bits to include the available list of IPS
debug flags.
All the flags should work as documented, with the exception of
IPS_DISABLE_DYNAMIC. It requires dm changes which will be done in
later changes.
v2: enable docs and fix docstring format
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Document xe_ggtt and ensure it is part of the built kernel docs.
v2: - Accepted all Michal's suggestions
- Rebased on top of new set_pte per platform/wa function pointer
v3: - Typos and other acronym fixes (Michal)
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> #v1
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
At shutdown if you've got a _properly_ coded DRM modeset driver then
you'll get these two warnings at shutdown time:
Skipping disable of already disabled panel
Skipping unprepare of already unprepared panel
These warnings are ugly and sound concerning, but they're actually a
sign of a properly working system. That's not great.
We're not ready to get rid of the calls to drm_panel_disable() and
drm_panel_unprepare() because we're not 100% convinced that all DRM
modeset drivers are properly calling drm_atomic_helper_shutdown() or
drm_helper_force_disable_all() at the right times. However, having the
warning show up for correctly working systems is bad.
As a bit of a workaround, add some "if" tests to try to avoid the
warning on correctly working systems. Also add some comments and
update the TODO items in the hopes that future developers won't be too
confused by what's going on here.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621134427.1.Ieb287c2c3ee3f6d3b0d5f49b29f746b93621749c@changeid
Address the below kernel doc warning:
Documentation/gpu/amdgpu/display/display-manager:134:
drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:3: WARNING: Duplicate C
declaration, also defined at gpu/amdgpu/display/dcn-blocks:101.
Declaration is '.. c:struct:: mpcc_blnd_cfg'.
Documentation/gpu/amdgpu/display/display-manager:146:
drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:3: WARNING: Duplicate C
declaration, also defined at gpu/amdgpu/display/dcn-blocks:3.
Declaration is '.. c:enum:: mpcc_alpha_blend_mode'.
To address the above warnings, this commit uses the 'no-identifiers'
option in the dcn-blocks to avoid duplication with the previous use of
this function doc in the display-manager file. Finally, replaces the
deprecated ':function:' in favor of ':identifiers:'.
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dchubbub.h and hubp.h do not have any meaningful documentation; for
this reason, this commit removes those files from the dcn-blocks
documentation.
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building the kernel-doc, it has the following complaints:
Documentation/gpu/amdgpu/display/dcn-blocks:23:
drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h:3: WARNING: Duplicate C
declaration, also defined at gpu/amdgpu/display/dcn-blocks:3.
Declaration is '.. c:struct:: surface_flip_registers'.
Documentation/gpu/amdgpu/display/dcn-blocks:35:
drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h:3: WARNING: Duplicate C
declaration, also defined at gpu/amdgpu/display/dcn-blocks:3.
Declaration is '.. c:struct:: surface_flip_registers'.
This error happened due to a copy-and-paste where the same file path was
duplicated multiple times to a different set of blocks. This commit
addresses this issue by using the correct file path.
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit reduces, but does not fix, all the occurrences and some of
the documentation warnings related to the 'no structured comments.' This
was caused by the wrong use of the ':export:' option in the DCN
kernel-doc, so this commit drops the usage of those options.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building the kernel-doc, it complains with the below warning:
./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found
./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found
This warning was caused by the wrong use of the ':export:' and the lack
of function documentation in the file pointed under the ':internal:'.
This commit addresses those issues by relocating the overview
documentation to the correct C file, removing the ':export:' options,
and adding two simple kernel-doc to ensure that ':internal:' does not
have any warning.
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/dri-devel/20240715085918.68f5ecc9@canb.auug.org.au/
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add "Series" to MI200 and MI300 to clarify that they represent the
series of cards, and to more closely match the product information
materials. This also matches other entries in this list
Also correct a typo in the MI300 codename (Vangaram->Vanjaram)
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- bridge: Remove drm_bridge_chain_mode_fixup
- ci: Require a more recent version of mesa, improve farm estup and
test generation
- mipi-dbi: Remove mipi_dbi_machine_little_endian, make SPI bits per
word configurable, support RGB888, and allow pixel formats to be
specified in the DT.
- mm: Remove drm_mm_replace_node
- panic: Allow to dump kmsg to the screen
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
Driver Changes:
- sun4i: Rework the blender setup for DE2
- bridges:
- bridge-connector: Plumb in the new HDMI helpers
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes
- panels:
- More cleanup of prepare / enable state tracking in drivers
- New panel: PrimeView PM070WL4,
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZmqkZAAKCRDj7w1vZxhR
xUUeAP9ZuOvD8dGBFvR95yXQpsoaxyrC37zsckCo87SWRsyg3QEAmxmzdhgsGzKX
lXd3KsF/i1nOPflG9QeMj/lfroE28ww=
=k2mC
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-06-13' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- bridge: Remove drm_bridge_chain_mode_fixup
- ci: Require a more recent version of mesa, improve farm estup and
test generation
- mipi-dbi: Remove mipi_dbi_machine_little_endian, make SPI bits per
word configurable, support RGB888, and allow pixel formats to be
specified in the DT.
- mm: Remove drm_mm_replace_node
- panic: Allow to dump kmsg to the screen
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
Driver Changes:
- sun4i: Rework the blender setup for DE2
- bridges:
- bridge-connector: Plumb in the new HDMI helpers
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes
- panels:
- More cleanup of prepare / enable state tracking in drivers
- New panel: PrimeView PM070WL4,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240613-cicada-of-infinite-unity-0955ca@houat
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZlhUKAAKCRAnX84Zoj2+
dgHoAYDTpShgXFXnlnMtqZr+ZuShcjcwiqzwM4qNWdtyji9MONtJJU3ZQnGlnXbI
ZU+oZP0Bf0PyT0/8bf+rmZBJ1UdAxt2IQaLkP1tTHOad4E+KlcL5n1opzMi160mB
EZSm9f7aNw==
=bZPt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-05-30' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530-hilarious-flat-magpie-5fa186@houat
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
v2: Also change Documentation/gpu/i915.rst (Andi)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8c07233a8234858eb6711140482ef8db4c91cf4.1717075103.git.jani.nikula@intel.com
The i915 driver has a property to force the RGB range of an HDMI output.
The vc4 driver then implemented the same property with the same
semantics. KWin has support for it, and a PR for mutter is also there to
support it.
Both drivers implementing the same property with the same semantics,
plus the userspace having support for it, is proof enough that it's
pretty much a de-facto standard now and we can provide helpers for it.
Let's plumb it into the newly created HDMI connector.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-18-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The Broadcast RGB property has been documented as three separate entries
so far, each with a different set of values.
The first one is pretty much the generic one: it's used by i915 and vc4,
and is the one used by all the compositors.
The second one is used by the gma500 driver, and is a subset of the
first one: it can have the values "Full" or "Limited 16:235", but lack
the "Automatic" value.
The third one however isn't used by any driver and documents the values
"off", "auto" and "on".
It's unclear where the last one comes from. It was first documented in
commit 6c6a3996f2 ("Documentation: drm: describing drm properties
exposed by various drivers") which adds a number of properties used by
drivers, but without mentioning which driver was using what property.
Grepping at the 6c6a3996f2 commit however, it looks like no driver is
actually using it, and a quick look at the entire kernel history doesn't
show any match either.
At the time though, gma500 had an "audio" property used right next to
Broadcast RGB that did have the "off", "auto" and "on" values in the
same order.
As such, it was probably a copy/paste or scripting error back then, and
there's never been such property used in the kernel.
Either way, it certainly hasn't been used in a decade or two so we can
just get rid of it.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-17-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Print the accumulated runtime for client when printing fdinfo.
Each time a query is done it first does 2 things:
1) loop through all the exec queues for the current client and
accumulate the runtime, per engine class. CTX_TIMESTAMP is used for
that, being read from the context image.
2) Read a "GPU timestamp" that can be used for considering "how much GPU
time has passed" and that has the same unit/refclock as the one
recording the runtime. RING_TIMESTAMP is used for that via MMIO.
Since for all current platforms RING_TIMESTAMP follows the same
refclock, just read it once, using any first engine available.
This is exported to userspace as 2 numbers in fdinfo:
drm-cycles-<class>: <RUNTIME>
drm-total-cycles-<class>: <TIMESTAMP>
Userspace is expected to collect at least 2 samples, which allows to
know the client engine busyness as per:
RUNTIME1 - RUNTIME0
busyness = ---------------------
T1 - T0
Since drm-cycles-<class> always starts at 0, it's also possible to know
if and engine was ever used by a client.
It's expected that userspace will read any 2 samples every few seconds.
Given the update frequency of the counters involved and that
CTX_TIMESTAMP is 32-bits, the counter for each exec_queue can wrap
around (assuming 100% utilization) after ~200s. The wraparound is not
perceived by userspace since it's just accumulated for all the
exec_queues in a 64-bit counter) but the measurement will not be
accurate if the samples are too far apart.
This could be mitigated by adding a workqueue to accumulate the counters
every so often, but it's additional complexity for something that is
done already by userspace every few seconds in tools like gputop (from
igt), htop, nvtop, etc, with none of them really defaulting to 1 sample
per minute or more.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517204310.88854-9-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add documentation about the newly added pm_policy node in sysfs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current mipi_dsi_*_write_seq() macros are non-intutitive because
they contain a hidden "return" statement that will return out of the
_caller_ of the macro. Let's mark them as deprecated and instead
introduce some new macros that are more intuitive.
These new macros are less optimal when an error occurs but should
behave more optimally when there is no error. Specifically these new
macros cause smaller code to get generated and the code size savings
(less to fetch from RAM, less cache space used, less RAM used) are
important. Since the error case isn't something we need to optimize
for and these new macros are easier to understand and more flexible,
they should be used.
After converting to use these new functions, one example shows some
nice savings while also being easier to understand.
$ scripts/bloat-o-meter \
...after/panel-novatek-nt36672e.ko \
...ctx/panel-novatek-nt36672e.ko
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-988 (-988)
Function old new delta
nt36672e_1080x2408_60hz_init 6236 5248 -988
Total: Before=10651, After=9663, chg -9.28%
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.5.Ie94246c30fe95101e0e26dd5f96e976dbeb8f242@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.5.Ie94246c30fe95101e0e26dd5f96e976dbeb8f242@changeid
The function descriptions are optional and have not yet been added to
the DMC wakelock code, so we shouldn't try to use it. Since this is a
regression, remove the kernel-doc entry for DMC wakelocks for now.
The proper documentation will be added in a future patch.
Fixes: 765425f598 ("drm/i915/display: add support for DMC wakelocks")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510090502.667556-1-luciano.coelho@intel.com
The driver date serves no useful purpose, because it's hardly ever
updated. The information is misleading at best.
As described in Documentation/gpu/drm-internals.rst:
The driver date, formatted as YYYYMMDD, is meant to identify the date
of the latest modification to the driver. However, as most drivers
fail to update it, its value is mostly useless. The DRM core prints it
to the kernel log at initialization time and passes it to userspace
through the DRM_IOCTL_VERSION ioctl.
Stop printing the driver date at init, and start returning the empty
string "" as driver date through the DRM_IOCTL_VERSION ioctl.
The driver date initialization in drivers and the struct drm_driver date
member can be removed in follow-up.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240429164336.1406480-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rewrite some docs that are not up-to-date any longer. Remove the TODO
item for fbdev-generic conversion, as the helper has been replaced. Make
documentation for DMA, SHMEM and TTM emulation available.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-44-tzimmermann@suse.de
Only TTM-based drivers use fbdev-generic. Rename it to fbdev-ttm and
change the symbol infix from _generic_ to _ttm_. Link the source file
into TTM helpers, so that it is only build if TTM-based drivers have
been selected. Select DRM_TTM_HELPER for loongson.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-43-tzimmermann@suse.de
drm-misc-next for v6.10-rc1:
UAPI Changes:
- Add SIZE_HINTS property for cursor planes.
Cross-subsystem Changes:
Core Changes:
- Document the requirements and expectations of adding new
driver-specific properties.
- Assorted small fixes to ttm.
- More Kconfig fixes.
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- Fixes for drm-panic, and option to test it.
- Assorted small fixes and updates to edid.
- Add drm_crtc_vblank_crtc and use it in vkms, nouveau.
Driver Changes:
- Assorted small fixes and improvements to bridge/imx8mp-hdmi-tx, nouveau, ast, qaic, lima, vc4, bridge/anx7625, mipi-dsi.
- Add drm panic to simpledrm, mgag200, imx, ast.
- Use dev_err_probe in bridge/panel drivers.
- Add Innolux G121X1-L03, LG sw43408 panels.
- Use struct drm_edid in i915 bios parsing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2dc1b7c6-1743-4ddd-ad42-36f700234fbe@linux.intel.com
- Fix documentation of DP tunnel functions (Imre)
- DP MST read sideband messaging cap (Jani)
- Preparation patches for Adaptive Sync SDP Support for DP (Mitul)
Driver Changes:
i915 core (non-display):
- Documentation improvements (Nirmoy)
- Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas)
- Do not print 'pxp init failed with 0' when it succeed (Jose)
- Clean-up, including removal of dead code for unsupported platforms (Lucas)
- Adding new DG2 PCI ID (Ravi)
{i915,xe} display:
- Spelling fix (Colin Ian)
- Document CDCLK components (Gustavo)
- Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala)
- BIOS/VBT/opregion related refactor (Jani, Ville, RK)
- Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe)
- Digital port related refactor/clean-up (Ville)
- Fix 2s boot time regression on DP panel replay init (Animesh)
- Remove redundant drm_rect_visible() overlay use (Arthur)
- DSC HW state readout fixes (Imre)
- Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville)
- Disable AuxCCS framebuffers if built for Xe (Juha-Pekka)
- Fix DSI init order (Ville)
- DRRS related refactor and fixes (Bhanuprakash)
- Fix DSB vblank waits with VRR (Ville)
- General improvements on register name and use of REG_BIT (Ville)
- Some display power well related improvements (Ville)
- FBC changes for better w/a handling (Ville)
- Make crtc disable more atomic (Ville)
- Fix hwmon locking inversion in sysfs getter (Janusz)
- Increase DP idle pattern wait timeout to 2ms (Shekhar)
- PSR related fixes and improvents (Jouni)
- Start using container_of_const() for some extra const safety (Ville)
- Use drm_printer more on display code (Ville)
- Fix Jasper Lake boot freeze (Jonathon)
- Update Pipe src size check in skl_update_scaler (Ankit)
- Enable MST mode for 128b/132b single-stream sideband (Jani)
- Pass encoder around more for port/phy checks (Jani)
- Some initial work to make display code more independent from i915 (Jani)
- Pre-populate the cursor physical dma address (Ville)
- Do not bump min backlight brightness to max on enable (Gareth)
- Fix MTL supported DP rates - removal of UHBR13.5 (Arun)
- Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit)
- Bigjoiner modeset sequence redesign and MST support (Ville)
- Enable Adaptive Sync SDP Support for DP (Mitul)
- Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav)
- HDCP related fixes (Suraj)
- Fix i915_display_info debugfs when connectors are not active (Ville)
- Clean up on Xe compat layer (Jani)
- Add jitter WAs for MST/FEC/DSC links (Imre)
- DMC wakelock implementation (Luca)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r
E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu
bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF
02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv
8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ
ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx
7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ==
=JvZN
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2024-04-17-1' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-next
Core Changes (DRM):
- Fix documentation of DP tunnel functions (Imre)
- DP MST read sideband messaging cap (Jani)
- Preparation patches for Adaptive Sync SDP Support for DP (Mitul)
Driver Changes:
i915 core (non-display):
- Documentation improvements (Nirmoy)
- Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas)
- Do not print 'pxp init failed with 0' when it succeed (Jose)
- Clean-up, including removal of dead code for unsupported platforms (Lucas)
- Adding new DG2 PCI ID (Ravi)
{i915,xe} display:
- Spelling fix (Colin Ian)
- Document CDCLK components (Gustavo)
- Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala)
- BIOS/VBT/opregion related refactor (Jani, Ville, RK)
- Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe)
- Digital port related refactor/clean-up (Ville)
- Fix 2s boot time regression on DP panel replay init (Animesh)
- Remove redundant drm_rect_visible() overlay use (Arthur)
- DSC HW state readout fixes (Imre)
- Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville)
- Disable AuxCCS framebuffers if built for Xe (Juha-Pekka)
- Fix DSI init order (Ville)
- DRRS related refactor and fixes (Bhanuprakash)
- Fix DSB vblank waits with VRR (Ville)
- General improvements on register name and use of REG_BIT (Ville)
- Some display power well related improvements (Ville)
- FBC changes for better w/a handling (Ville)
- Make crtc disable more atomic (Ville)
- Fix hwmon locking inversion in sysfs getter (Janusz)
- Increase DP idle pattern wait timeout to 2ms (Shekhar)
- PSR related fixes and improvents (Jouni)
- Start using container_of_const() for some extra const safety (Ville)
- Use drm_printer more on display code (Ville)
- Fix Jasper Lake boot freeze (Jonathon)
- Update Pipe src size check in skl_update_scaler (Ankit)
- Enable MST mode for 128b/132b single-stream sideband (Jani)
- Pass encoder around more for port/phy checks (Jani)
- Some initial work to make display code more independent from i915 (Jani)
- Pre-populate the cursor physical dma address (Ville)
- Do not bump min backlight brightness to max on enable (Gareth)
- Fix MTL supported DP rates - removal of UHBR13.5 (Arun)
- Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit)
- Bigjoiner modeset sequence redesign and MST support (Ville)
- Enable Adaptive Sync SDP Support for DP (Mitul)
- Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav)
- HDCP related fixes (Suraj)
- Fix i915_display_info debugfs when connectors are not active (Ville)
- Clean up on Xe compat layer (Jani)
- Add jitter WAs for MST/FEC/DSC links (Imre)
- DMC wakelock implementation (Luca)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r
# E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu
# bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF
# 02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv
# 8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ
# ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx
# 7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ==
# =JvZN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Apr 2024 23:22:09 AEST
# gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown]
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zh_Q72gYKMMbge9A@intel.com
In order to reduce the DC5->DC2 restore time, wakelocks have been
introduced in DMC so the driver can tell it when registers and other
memory areas are going to be accessed and keep their respective blocks
awake.
Implement this in the driver by adding the concept of DMC wakelocks.
When the driver needs to access memory which lies inside pre-defined
ranges, it will tell DMC to set the wakelock, access the memory, then
wait for a while and clear the wakelock.
The wakelock state is protected in the driver with spinlocks to
prevent concurrency issues.
BSpec: 71583
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-2-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This module displays a user friendly message when a kernel panic
occurs. It currently doesn't contain any debug information,
but that can be added later.
v2
* Use get_scanout_buffer() instead of the drm client API.
(Thomas Zimmermann)
* Add the panic reason to the panic message (Nerdopolis)
* Add an exclamation mark (Nerdopolis)
v3
* Rework the drawing functions, to write the pixels line by line and
to use the drm conversion helper to support other formats.
(Thomas Zimmermann)
v4
* Use drm_fb_r1_to_32bit for fonts (Thomas Zimmermann)
* Remove the default y to DRM_PANIC config option (Thomas Zimmermann)
* Add foreground/background color config option
* Fix the bottom lines not painted if the framebuffer height
is not a multiple of the font height.
* Automatically register the device to drm_panic, if the function
get_scanout_buffer exists. (Thomas Zimmermann)
v5
* Change the drawing API, use drm_fb_blit_from_r1() to draw the font.
* Also add drm_fb_fill() to fill area with background color.
* Add draw_pixel_xy() API for drivers that can't provide a linear buffer.
* Add a flush() callback for drivers that needs to synchronize the buffer.
* Add a void *private field, so drivers can pass private data to
draw_pixel_xy() and flush().
v6
* Fix sparse warning for panic_msg and logo.
v7
* Add select DRM_KMS_HELPER for the color conversion functions.
v8
* Register directly each plane to the panic notifier (Sima)
* Add raw_spinlock to properly handle concurrency (Sima)
* Register plane instead of device, to avoid looping through plane
list, and simplify code.
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
* Removed the draw_pixel_xy() API, will see later if it can be added back.
v9
* Revert to using get_scanout_buffer() (Sima)
* Move get_scanout_buffer() and panic_flush() to the plane helper
functions (Thomas Zimmermann)
* Register all planes with get_scanout_buffer() to the panic notifier
* Use drm_panic_lock() to protect against race (Sima)
v10
* Move blit and fill functions back in drm_panic (Thomas Zimmermann).
* Simplify the text drawing functions.
* Use kmsg_dumper instead of panic_notifier (Sima).
v12
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
* Better indent struct drm_scanout_buffer declaration. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-3-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When extending support for a driver-specific KMS property to additional
drivers, we should apply all the requirements for new properties and
make sure the semantics are the same and documented.
v2: devs of the driver which introduced property shall help and ack
Signed-off-by: Sebastian Wick <sebastian.wick@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410122008.38207-1-sebastian.wick@redhat.com
The path to GPU documentation is Documentation/gpu
rather than Documentation/GPU
This appears to have been introduced by commit ba162ae749
("Documentation/gpu: Introduce a simple contribution list for display code")
Flagged by make htmldocs.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Covers GPU page fault debugging and adds a reference
to umr.
v2: update client ids to include SQC/G
v3: Remove duplicate text
v4: add umr documentation link, fix typo
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCI IDs for XEHPSDV were never added and platform always marked with
force_probe. Drop what's not used and rename some places to either be
xehp or dg2, depending on the platform/IP checks.
The registers not used anymore are also removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Debugfs isn't always available in production builds that try to squeeze
every single byte out of the kernel image, but we still need a way to
toggle the timestamp and cycle counter registers so that jobs can be
profiled for fdinfo's drm engine and cycle calculations.
Drop the debugfs knob and replace it with a sysfs file that accomplishes
the same functionality, and document its ABI in a separate file.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306015819.822128-2-adrian.larumbe@collabora.com
Panthor follows the lead of other recently submitted drivers with
ioctls allowing us to support modern Vulkan features, like sparse memory
binding:
- Pretty standard GEM management ioctls (BO_CREATE and BO_MMAP_OFFSET),
with the 'exclusive-VM' bit to speed-up BO reservation on job submission
- VM management ioctls (VM_CREATE, VM_DESTROY and VM_BIND). The VM_BIND
ioctl is loosely based on the Xe model, and can handle both
asynchronous and synchronous requests
- GPU execution context creation/destruction, tiler heap context creation
and job submission. Those ioctls reflect how the hardware/scheduler
works and are thus driver specific.
We also have a way to expose IO regions, such that the usermode driver
can directly access specific/well-isolate registers, like the
LATEST_FLUSH register used to implement cache-flush reduction.
This uAPI intentionally keeps usermode queues out of the scope, which
explains why doorbell registers and command stream ring-buffers are not
directly exposed to userspace.
v6:
- Add Maxime's and Heiko's acks
v5:
- Fix typo
- Add Liviu's R-b
v4:
- Add a VM_GET_STATE ioctl
- Fix doc
- Expose the CORE_FEATURES register so we can deal with variants in the
UMD
- Add Steve's R-b
v3:
- Add the concept of sync-only VM operation
- Fix support for 32-bit userspace
- Rework drm_panthor_vm_create to pass the user VA size instead of
the kernel VA size (suggested by Robin Murphy)
- Typo fixes
- Explicitly cast enums with top bit set to avoid compiler warnings in
-pedantic mode.
- Drop property core_group_count as it can be easily calculated by the
number of bits set in l2_present.
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229162230.2634044-2-boris.brezillon@collabora.com
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmXXUhsACgkQaA3BHVML
eiNVFQf+IoOXCACGkWEVmVaen50pjEfLq0OjSGHdbTJqhc9wU7Q/kPC+jEpZLyqo
OUMdXlA55BeLX52O+bvLordDPNETUsYH1QX2BYKDwcNIrvj8ISXcvdbnDcbVmttD
ZUaaBgZ0g2M6sZQvTVU88/1RtaG64+zuk9VA1dPlh6WnBtXBUeXNtD6YQjH6xY+a
MjZpB5VafwJTmQxy7qJ4yTLX291Ao8J2YZK8cCSyEr3FQKkAx9sJyp3hPurVIjLM
f1y1rtoHhxUV/OVg4M559fp6F6tUkFauv4qu5VUvmPPihJTaU0eSQxir0za4VJ4e
Jr2GOkju0oRRpKfjd0aKvaoWhl+MNg==
=aaTQ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222135841.GA6677@localhost.localdomain
Clarify the documentation in preparation for updated
helpers which check the handle count as well as whether
a dma-buf has been attached.
Link: https://lore.kernel.org/all/20231207180225.439482-1-alexander.deucher@amd.com/
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.keonig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
This commit adds a contribution list for display under the kernel
documentation with some first suggestions. It also drops an old TODO
list from the display folder.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces some explanation about the display team
validation.
Changes since V1:
- Remove unprecise information about the DC process for now, can be
added later on.
- Jani: Fix bullets
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce OPP as part of the kernel documentation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a kernel-doc entry for the MPC block. Since it enabled
the kernel-doc to parse some of the documentation in the mpc.h file,
fixing some of the comments was required.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces basic DPP information and the struct scan for
code documentation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the documentation to extract code documentation from dchubbub.h
file.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create the HUBP documentation page and add the doc references to extract
the HUBP code documentation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These have been released now, so add them to the documentation.
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The file has already been deleted as the tasks were completed.
However the index reference was missed behind.
fixes a doc build warning:
Documentation/gpu/rfc/index.rst:35: WARNING: toctree contains
reference to nonexisting document 'gpu/rfc/xe'
Fixes: d11dc7aa98 ("drm/doc/rfc: Remove Xe's pre-merge plan")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240116220331.145607-1-rodrigo.vivi@intel.com
Add two articles on LWN about the Linux graphics stack to DRM's
list of external references. The articles document the graphics
output as a whole, including the kernel side.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115113908.25897-1-tzimmermann@suse.de
The functions that were described in this section of
drm-internals.rst were removed in NOV-2023, along with all of the
kernel-doc comments in the source file. This now causes a
docs build warning, so remove that section of the documentation also.
drivers/gpu/drm/drm_pci.c:1: warning: no structured comments found
Fixes: 2504c7ec72 ("drm: Remove source code for non-KMS drivers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240112051731.15722-1-rdunlap@infradead.org
The last TODO item here that was not marked as done was
the display portion, which came along with the pull-request.
So, now that Xe is part of drm-next and it includes the
display portion, let's entirely kill this RFC here.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110190427.63095-1-rodrigo.vivi@intel.com
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms. The experimental support starts with Tiger Lake.
i915 will continue be the main production driver for the platforms
up to Meteor Lake and Alchemist. Then the goal is to make this Intel
Xe driver the primary driver for Lunar Lake and newer platforms.
It uses most, if not all, of the key drm concepts, in special: TTM,
drm-scheduler, drm-exec, drm-gpuvm/gpuva and others.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmWErlkACgkQ+mJfZA7r
E8ptAQf/UILUy63usqMBQx5gGTJ5e6oyGy0r97JdBBWNxhcu3/4uN1SR6V2LSV7p
mnZt/LrHZ/24s73e5D7sh909GCYm/MMWH7v0KypJq5Z74BHb9IePP7+Q4NTfXfqS
5AotYxDEwPBQZpfYLA7y17XrB01yz/gF8wHytBFTPiPOlve7BDAYw4j8o+ocztxy
sLLwPi7A6RJJlpXaDa33DpH5MLpTVYUOuxaIElqu949AJj/Me+LHd26VfoGWt9YT
AWzAm+LLoBhyE5lk9swWxvphGvNoOuKf8soTMEVXr4qxsR6d4LShkrljSYSbtRhl
2QZMgvSL4pGkB3Yvfxb0hidWuVMNfA==
=bubx
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2023-12-21-pr1-1' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Introduce a new DRM driver for Intel GPUs
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms. The experimental support starts with Tiger Lake.
i915 will continue be the main production driver for the platforms
up to Meteor Lake and Alchemist. Then the goal is to make this Intel
Xe driver the primary driver for Lunar Lake and newer platforms.
It uses most, if not all, of the key drm concepts, in special: TTM,
drm-scheduler, drm-exec, drm-gpuvm/gpuva and others.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: add an extra X86 check, fix a typo, fix drm_exec_init interface
change].
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZYSwLgXZUZ57qGPQ@intel.com
Our xe_assert() macros are well documented.
Include that in master documentation.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231115112921.1905-1-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GSC-enabled HuC binary starts with a GSC header, which is followed
by the legacy-style CSS header and the binary itself. We can parse the
GSC headers to find the HuC version and the location of the binary to
be used for the DMA transfer.
The parsing function has been designed to be re-used for the GSC binary,
so the entry names are external parameters (because the GSC uses
different ones) and the CSS entry is optional (because the GSC doesn't
have it).
v2: move new code to uc_fw.c, better comments and error checking, split
old code move to separate patch (Lucas), move headers and
documentation to uc_fw_abi.h.
v3: use 2 separate loops, rework marker check (Lucas)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GSC binaries and newer HuC ones use GSC-style headers instead of the
CSS. In preparation for adding support for such parsing, split out the
current parsing code to its own function, to make it cleaner to add the
new paths. The existing doc section has also been renamed to narrow it
to CSS-based binaries.
v2: new patch in series, split out from next patch for easier reviewing
v3: drop unneeded include (Lucas)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Make sure the uapi gets picked up by the normal docs build.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
`/` wasn't meant to be in the Dragon Range line
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These have been announced so add them to the table.
Link: https://www.amd.com/en/product/13971
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
Cross-subsystem Changes:
- A few fixes for usb/typec
Core Changes:
- ci: Updates to the defconfig, igt version, etc.
- writeback: Move the atomic_check helper from the encoder to connector
Driver Changes:
- rockchip: Add support for rk3588
- xe: Update the TODO list
- panel:
- nv3052c: Register documentation, init sequence improvements and
support for the Fascontek FS035VG158
- st7701: Add support for the Anbernic RG-ARC
- new driver: Synaptics R63353 panel controller, Ilitek ILI9805 panel
controller
- new panel: AUO G156HAN04.0
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZXrMAwAKCRDj7w1vZxhR
xa+2AP9ZyK/PP5/a1y1PKUQ9IYPjRW0QEda2I7w1XK6hglSWDgD9Hu9Q8YPUtlTT
PT0qZ++tdxnCiGgj+yK3Yc1qPcb6+Qw=
=o4Gu
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-12-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for $kernel-version:
UAPI Changes:
Cross-subsystem Changes:
- A few fixes for usb/typec
Core Changes:
- ci: Updates to the defconfig, igt version, etc.
- writeback: Move the atomic_check helper from the encoder to connector
Driver Changes:
- rockchip: Add support for rk3588
- xe: Update the TODO list
- panel:
- nv3052c: Register documentation, init sequence improvements and
support for the Fascontek FS035VG158
- st7701: Add support for the Anbernic RG-ARC
- new driver: Synaptics R63353 panel controller, Ilitek ILI9805 panel
controller
- new panel: AUO G156HAN04.0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aqpn5miejmkks7pbcfex7b6u63uwsruywxsnr3x5ljs45qatin@nbkkej2elk46
The name of the structure drm_atomic_state is confusing. Let's add an
entry to our todo list to rename it.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-5-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
UAPI Changes:
- Remove Userspace Mode-Setting ioctls
- v3d: New uapi to handle jobs involving the CPU
Cross-subsystem Changes:
Core Changes:
- atomic: Add support for FB-less planes which got reverted a bit
later for lack of IGT tests and userspace code, Dump private objects
state in drm_state_dump.
- dma-buf: Add fence deadline support
- encoder: Create per-encoder debugfs directory, move the bridge chain
file to that directory
Driver Changes:
- Include drm_auth.h in driver that use it but don't include it, Drop
drm_plane_helper.h from drivers that include it but don't use it
- imagination: Plenty of small fixes
- panfrost: Improve interrupt handling at poweroff
- qaic: Convert to persistent DRM devices
- tidss: Support for the AM62A7, a few probe improvements, some cleanups
- v3d: Support for jobs involving the CPU
- bridge:
- Create transparent aux-bridge for DP/USB-C
- lt8912b: Add suspend/resume support and power regulator support
- panel:
- himax-hx8394: Drop prepare, unprepare and shutdown logic, Support
panel rotation
- New panels: BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G,
Evervision VGG644804, SDC ATNA45AF01
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZXGXPAAKCRDj7w1vZxhR
xblIAP4tz7X0mqa7KFr6L0sIfVILHANho4L81IUFi+kpTn64WgEAnqJ3IqJtdLbi
czXzgJPae3Ifstm7CW7+72fLQCR6Cg8=
=pU2c
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.8:
UAPI Changes:
- Remove Userspace Mode-Setting ioctls
- v3d: New uapi to handle jobs involving the CPU
Cross-subsystem Changes:
Core Changes:
- atomic: Add support for FB-less planes which got reverted a bit
later for lack of IGT tests and userspace code, Dump private objects
state in drm_state_dump.
- dma-buf: Add fence deadline support
- encoder: Create per-encoder debugfs directory, move the bridge chain
file to that directory
Driver Changes:
- Include drm_auth.h in driver that use it but don't include it, Drop
drm_plane_helper.h from drivers that include it but don't use it
- imagination: Plenty of small fixes
- panfrost: Improve interrupt handling at poweroff
- qaic: Convert to persistent DRM devices
- tidss: Support for the AM62A7, a few probe improvements, some cleanups
- v3d: Support for jobs involving the CPU
- bridge:
- Create transparent aux-bridge for DP/USB-C
- lt8912b: Add suspend/resume support and power regulator support
- panel:
- himax-hx8394: Drop prepare, unprepare and shutdown logic, Support
panel rotation
- New panels: BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G,
Evervision VGG644804, SDC ATNA45AF01
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/yu5heqaufyeo4nlowzieu4s5unwqrqyx4jixbfjmzdon677rpk@t53vceua2dao
The must-have part of the documentation was already added to the existing
/gpu/drm-vm-bind-async. The other extra discussion around GPUVM helpers
are currently active in the community. None of those discussion should
block Xe since documentation, specially around locking was completed in
a community consensus.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201042158.80009-5-rodrigo.vivi@intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As already indicated in this block, the consensus was already
reached out and documented as:
The ASYNC VM_BIND document </gpu/drm-vm-bind-async>
However this was item was not moved to the completed section.
Let's move and clean up the WIP block.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201042158.80009-4-rodrigo.vivi@intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Current drm-xe-next doesn't have any drm/scheduler patch that is not
already accepted in drm-misc-next. This completed this goal with
the consensus of how the drm/scheduler fits to the fw scheduling and
the relationship between drm_gpu_scheduler and drm_sched_entity.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201042158.80009-3-rodrigo.vivi@intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No DRM scheduler changes required, drivers just return NULL in run_job
vfunc.
The rough consensus is that no helper or extra scaffolding is needed
around long-running jobs and no further changes to drm-scheduler.
At least for now. Other drivers that currently do long-running workloads
have no plat to use drm-scheduler. Besides, the current consensus is
that this solution of simply returning NULL to the run_job function should
work without extra code duplication or complication.
On top of that, this item was already a non-blocking one for upstreaming Xe,
so let's move that to the 'Completed' section and revisit the long-running
solution as a community after Xe is integrated in DRM.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201042158.80009-2-rodrigo.vivi@intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Non-KMS drivers have been removed from DRM. Update the TODO list
accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a276afc19e ("drm: Remove some obsolete drm pciids(tdfx, mga, i810, savage, r128, sis, via)")
Cc: Cai Huoqing <cai.huoqing@linux.dev>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.3+
Cc: linux-doc@vger.kernel.org
Reviewed-by: David Airlie <airlied@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-3-tzimmermann@suse.de
Add the first version of the VM_BIND locking document which is
intended to be part of the xe driver upstreaming agreement.
The document describes and discuss the locking used during exec-
functions, evicton and for userptr gpu-vmas. Intention is to be using the
same nomenclature as the drm-vm-bind-async.rst.
v2:
- s/gvm/gpu_vm/g (Rodrigo Vivi)
- Clarify the userptr seqlock with a pointer to mm/mmu_notifier.c
(Rodrigo Vivi)
- Adjust commit message accordingly.
- Add SPDX license header.
v3:
- Large update to align with the drm_gpuvm manager locking
- Add "Efficient userptr gpu_vma exec function iteration" section
- Add "Locking at bind- and unbind time" section.
v4:
- Fix tabs vs space errors by untabifying (Rodrigo Vivi)
- Minor style fixes and typos (Rodrigo Vivi)
- Clarify situations where stale GPU mappings are occurring and how
access through these mappings are blocked. (Rodrigo Vivi)
- Insert into the toctree in implementation_guidelines.rst
v5:
- Add a section about recoverable page-faults.
- Use local references to other documentation where possible
(Bagas Sanjaya)
- General documentation fixes and typos (Danilo Krummrich and
Boris Brezillon)
- Improve the documentation around locks that need to be grabbed from the
dm-fence critical section (Boris Brezillon)
- Add more references to the DRM GPUVM helpers (Danilo Krummrich and
Boriz Brezillon)
- Update the rfc/xe.rst document.
v6:
- Rework wording to improve readability (Boris Brezillon, Rodrigo Vivi,
Bagas Sanjaya)
- Various minor fixes across the document (Boris Brezillon)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Acked-by: John Hubbard <jhubbard@nvidia.com> # Documentation/core-api/pin_user_pages.rst changes
Link: https://patchwork.freedesktop.org/patch/msgid/20231129090637.2629-1-thomas.hellstrom@linux.intel.com
Currently, only damage tracking for frame damage is supported. If a driver
needs to do buffer damage (e.g: the framebuffer attached to plane's state
has changed since the last page-flip), the damage helpers just fallback to
a full plane update.
Add en entry in the TODO about implementing buffer age or any other damage
accumulation algorithm for buffer damage handling.
Suggested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Sima Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123221315.3579454-6-javierm@redhat.com
