mirror of
https://github.com/torvalds/linux.git
synced 2026-05-28 17:13:52 +02:00
arm64: dts: qcom: kaanapali: Add PMIC devices
Add a spmi-pmic-arb device for the SPMI PMIC arbiter found on Kaanapali. It has two subnodes corresponding to the SPMI0 bus controller and the SPMI1 bus controller. Also add dtsi files for PMH0104, PMH0110, PMD8028, PMIH0108, PMR735D and PM8010 along with temp-alarm and GPIO nodes under them, which are needed on Kaanapali. Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-1-70bc40ea4428@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Jishnu Prakash
Bjorn Andersson
parent
1ee6f0fa1d
commit
fe2a1e9de3
|
|
@ -3316,6 +3316,53 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
|
|||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
arbiter@c400000 {
|
||||
compatible = "qcom,kaanapali-spmi-pmic-arb", "qcom,glymur-spmi-pmic-arb";
|
||||
reg = <0x0 0x0c400000 0x0 0x3000>,
|
||||
<0x0 0x0c900000 0x0 0x400000>,
|
||||
<0x0 0x0c4c0000 0x0 0x400000>,
|
||||
<0x0 0x0c403000 0x0 0x8000>;
|
||||
reg-names = "core",
|
||||
"chnls",
|
||||
"obsrvr",
|
||||
"chnl_map";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
qcom,channel = <0>;
|
||||
qcom,ee = <0>;
|
||||
|
||||
spmi_bus0: spmi@c426000 {
|
||||
reg = <0x0 0x0c426000 0x0 0x4000>,
|
||||
<0x0 0x0c8c0000 0x0 0x10000>,
|
||||
<0x0 0x0c42a000 0x0 0x8000>;
|
||||
reg-names = "cnfg",
|
||||
"intr",
|
||||
"chnl_owner";
|
||||
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "periph_irq";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <4>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
spmi_bus1: spmi@c437000 {
|
||||
reg = <0x0 0x0c437000 0x0 0x4000>,
|
||||
<0x0 0x0c8d0000 0x0 0x10000>,
|
||||
<0x0 0x0c43b000 0x0 0x8000>;
|
||||
reg-names = "cnfg",
|
||||
"intr",
|
||||
"chnl_owner";
|
||||
interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "periph_irq";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <4>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
tlmm: pinctrl@f100000 {
|
||||
compatible = "qcom,kaanapali-tlmm";
|
||||
reg = <0x0 0x0f100000 0x0 0x300000>;
|
||||
|
|
|
|||
93
arch/arm64/boot/dts/qcom/pm8010-kaanapali.dtsi
Normal file
93
arch/arm64/boot/dts/qcom/pm8010-kaanapali.dtsi
Normal file
|
|
@ -0,0 +1,93 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
/ {
|
||||
thermal-zones {
|
||||
pm8010-m-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
|
||||
thermal-sensors = <&pm8010_m_e1_temp_alarm>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pm8010-n-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
|
||||
thermal-sensors = <&pm8010_n_e1_temp_alarm>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus1 {
|
||||
pm8010_m_e1: pmic@c {
|
||||
compatible = "qcom,pm8010", "qcom,spmi-pmic";
|
||||
reg = <0xc SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pm8010_m_e1_temp_alarm: temp-alarm@2400 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0x2400>;
|
||||
interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pm8010_n_e1: pmic@d {
|
||||
compatible = "qcom,pm8010", "qcom,spmi-pmic";
|
||||
reg = <0xd SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pm8010_n_e1_temp_alarm: temp-alarm@2400 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0x2400>;
|
||||
interrupts = <0xd 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
62
arch/arm64/boot/dts/qcom/pmd8028-kaanapali.dtsi
Normal file
62
arch/arm64/boot/dts/qcom/pmd8028-kaanapali.dtsi
Normal file
|
|
@ -0,0 +1,62 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
/ {
|
||||
thermal-zones {
|
||||
pmd8028-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
thermal-sensors = <&pmd8028_e1_temp_alarm>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus1 {
|
||||
pmd8028_e1: pmic@4 {
|
||||
compatible = "qcom,pmd8028", "qcom,spmi-pmic";
|
||||
reg = <0x4 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmd8028_e1_temp_alarm: temp-alarm@a00 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0xa00>;
|
||||
interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmd8028_e1_gpios: gpio@8800 {
|
||||
compatible = "qcom,pmd8028-gpio", "qcom,spmi-gpio";
|
||||
reg = <0x8800>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pmd8028_e1_gpios 0 0 4>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
63
arch/arm64/boot/dts/qcom/pmh0104-kaanapali.dtsi
Normal file
63
arch/arm64/boot/dts/qcom/pmh0104-kaanapali.dtsi
Normal file
|
|
@ -0,0 +1,63 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
/ {
|
||||
thermal-zones {
|
||||
pmh0104-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
|
||||
thermal-sensors = <&pmh0104_j_e1_temp_alarm>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus1 {
|
||||
pmh0104_j_e1: pmic@9 {
|
||||
compatible = "qcom,pmh0104", "qcom,spmi-pmic";
|
||||
reg = <0x9 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmh0104_j_e1_temp_alarm: temp-alarm@a00 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0xa00>;
|
||||
interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmh0104_j_e1_gpios: gpio@8800 {
|
||||
compatible = "qcom,pmh0104-gpio", "qcom,spmi-gpio";
|
||||
reg = <0x8800>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pmh0104_j_e1_gpios 0 0 8>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
213
arch/arm64/boot/dts/qcom/pmh0110-kaanapali.dtsi
Normal file
213
arch/arm64/boot/dts/qcom/pmh0110-kaanapali.dtsi
Normal file
|
|
@ -0,0 +1,213 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause-Clear
|
||||
/*
|
||||
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
/ {
|
||||
thermal-zones {
|
||||
pmh0110-d-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
|
||||
thermal-sensors = <&pmh0110_d_e0_temp_alarm>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmh0110-f-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
|
||||
thermal-sensors = <&pmh0110_f_e0_temp_alarm>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmh0110-g-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
|
||||
thermal-sensors = <&pmh0110_g_e0_temp_alarm>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmh0110-i-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
|
||||
thermal-sensors = <&pmh0110_i_e0_temp_alarm>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus0 {
|
||||
pmh0110_d_e0: pmic@3 {
|
||||
compatible = "qcom,pmh0110", "qcom,spmi-pmic";
|
||||
reg = <0x3 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmh0110_d_e0_temp_alarm: temp-alarm@a00 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0xa00>;
|
||||
interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmh0110_d_e0_gpios: gpio@8800 {
|
||||
compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio";
|
||||
reg = <0x8800>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pmh0110_d_e0_gpios 0 0 14>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
pmh0110_f_e0: pmic@5 {
|
||||
compatible = "qcom,pmh0110", "qcom,spmi-pmic";
|
||||
reg = <0x5 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmh0110_f_e0_temp_alarm: temp-alarm@a00 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0xa00>;
|
||||
interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmh0110_f_e0_gpios: gpio@8800 {
|
||||
compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio";
|
||||
reg = <0x8800>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pmh0110_f_e0_gpios 0 0 14>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
pmh0110_g_e0: pmic@6 {
|
||||
compatible = "qcom,pmh0110", "qcom,spmi-pmic";
|
||||
reg = <0x6 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmh0110_g_e0_temp_alarm: temp-alarm@a00 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0xa00>;
|
||||
interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmh0110_g_e0_gpios: gpio@8800 {
|
||||
compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio";
|
||||
reg = <0x8800>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pmh0110_g_e0_gpios 0 0 14>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
pmh0110_i_e0: pmic@8 {
|
||||
compatible = "qcom,pmh0110", "qcom,spmi-pmic";
|
||||
reg = <0x8 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmh0110_i_e0_temp_alarm: temp-alarm@a00 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0xa00>;
|
||||
interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmh0110_i_e0_gpios: gpio@8800 {
|
||||
compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio";
|
||||
reg = <0x8800>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pmh0110_i_e0_gpios 0 0 14>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
68
arch/arm64/boot/dts/qcom/pmih0108-kaanapali.dtsi
Normal file
68
arch/arm64/boot/dts/qcom/pmih0108-kaanapali.dtsi
Normal file
|
|
@ -0,0 +1,68 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
/ {
|
||||
thermal-zones {
|
||||
pmih0108-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
thermal-sensors = <&pmih0108_e1_temp_alarm>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus1 {
|
||||
pmih0108_e1: pmic@7 {
|
||||
compatible = "qcom,pmih0108", "qcom,spmi-pmic";
|
||||
reg = <0x7 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmih0108_e1_temp_alarm: temp-alarm@a00 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0xa00>;
|
||||
interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmih0108_e1_gpios: gpio@8800 {
|
||||
compatible = "qcom,pmih0108-gpio", "qcom,spmi-gpio";
|
||||
reg = <0x8800>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pmih0108_e1_gpios 0 0 18>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
pmih0108_e1_eusb2_repeater: phy@fd00 {
|
||||
compatible = "qcom,pm8550b-eusb2-repeater";
|
||||
reg = <0xfd00>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
63
arch/arm64/boot/dts/qcom/pmr735d-kaanapali.dtsi
Normal file
63
arch/arm64/boot/dts/qcom/pmr735d-kaanapali.dtsi
Normal file
|
|
@ -0,0 +1,63 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
/ {
|
||||
thermal-zones {
|
||||
pmr735d-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
|
||||
thermal-sensors = <&pmr735d_e1_temp_alarm>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus1 {
|
||||
pmr735d_e1: pmic@a {
|
||||
compatible = "qcom,pmr735d", "qcom,spmi-pmic";
|
||||
reg = <0xa SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmr735d_e1_temp_alarm: temp-alarm@a00 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0xa00>;
|
||||
interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmr735d_e1_gpios: gpio@8800 {
|
||||
compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
|
||||
reg = <0x8800>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pmr735d_e1_gpios 0 0 2>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user