github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-06-02 03:24:19 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

arm64: dts: ti: k3-am62p5-sk: Remove the unused cfg in USB1_DRVVBUS

Browse Source 
After the SoC has entered the DeepSleep low power mode, USB1 can be used
to wakeup the SoC based on USB events triggered by USB devices. This
requires that the pin corresponding to the Type-A connector remains pulled
up even after the SoC has entered the DeepSleep low power mode.
For that, either DeepSleep pullup configuration can be selected or the pin
can have the same configuration that it had when SoC was in active mode.
Remove the unnecessary DeepSleep state configuration from USB1_DRVBUS pin,
as the DeepSleep control bit is not set and the active configuration is
sufficient to keep the pin pulled up. This simplifies the setup and removes
redundant configuration.

This reverts commit 115290c112.

Tested-by: Kendall Willis <k-willis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Akashdeep Kaur <a-kaur@ti.com>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Acked-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250909044108.2541534-2-a-kaur@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This commit is contained in:
Akashdeep Kaur 2025-09-09 10:11:05 +05:30 committed by Nishanth Menon
parent 1a1066f553
commit fe0e018b05
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
View File

@ -348,7 +348,7 @@ AM62PX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (G20) MCASP0_ACLKR.UART1_TXD */
main_usb1_pins_default: main-usb1-default-pins {
pinctrl-single,pins = <
AM62PX_IOPAD(0x0258, PIN_INPUT | PIN_DS_PULLUD_ENABLE | PIN_DS_PULL_UP, 0) /* (G21) USB1_DRVVBUS */
AM62PX_IOPAD(0x0258, PIN_INPUT, 0) /* (G21) USB1_DRVVBUS */
>;
};