From 0e2bec77ea62895416600c90588f593516572bca Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 21 Sep 2026 15:00:17 -0700 Subject: [PATCH 1/5] net: bcmgenet: fix 64-bit RTNL stats reading in ethtool on 32-bit systems When bcmgenet was converted to 64-bit statistics, STAT_RTNL members were switched to point into struct rtnl_link_stats64, whose fields are 64-bit (__u64) regardless of architecture. However, bcmgenet_get_ethtool_stats() retained a legacy check: if (sizeof(unsigned long) != sizeof(u32) && s->stat_sizeof == sizeof(unsigned long)) On 32-bit systems, sizeof(unsigned long) == sizeof(u32), causing this condition to evaluate to false. As a result, 64-bit RTNL stats fields were read via *(u32 *)p. On 32-bit Big-Endian systems (such as MIPS BE), this reads the high 32 bits and returns 0 until the counter exceeds 4GB; on 32-bit Little-Endian systems (such as 32-bit ARM), the value is truncated to 32 bits. Fix this by checking if s->stat_sizeof == sizeof(u64) so 64-bit fields are always read as 64-bit values. Fixes: 59aa6e3072aa ("net: bcmgenet: switch to use 64bit statistics") Reviewed-by: Nicolai Buchwitz Signed-off-by: Florian Fainelli Link: https://patch.msgid.link/20260921220021.281418-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index ca62041efecd..47a6c073c8d9 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1346,9 +1346,8 @@ static void bcmgenet_get_ethtool_stats(struct net_device *dev, p = (char *)&stats64; p += s->stat_offset; - if (sizeof(unsigned long) != sizeof(u32) && - s->stat_sizeof == sizeof(unsigned long)) - data[i] = *(unsigned long *)p; + if (s->stat_sizeof == sizeof(u64)) + data[i] = *(u64 *)p; else data[i] = *(u32 *)p; } From 3aeaa609fda19c09d5298c9fedaaa3b6229601b5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 21 Sep 2026 15:00:18 -0700 Subject: [PATCH 2/5] net: bcmgenet: initialize u64 stats seq counter for all queues bcmgenet_gstrings_stats statically defines ethtool statistics for queues 0 through GENET_MAX_MQ_CNT (4). However, bcmgenet_probe() only initialized the u64_stats_sync seq counter up to priv->hw_params->rx_queues and priv->hw_params->tx_queues. Since priv->hw_params->rx_queues is 0 across all hardware versions (and priv->hw_params->tx_queues is 0 on GENET V1), rings 1..4 have uninitialized u64_stats_sync structures. When ethtool -S is run on 32-bit kernels, bcmgenet_get_ethtool_stats() reads stats from rx_rings[1..4], causing lockdep warnings due to the uninitialized sequence counters. Initialize the sequence counters for all GENET_MAX_MQ_CNT + 1 queues. Fixes: ffc2c8c4a714 ("net: bcmgenet: Initialize u64 stats seq counter") Reviewed-by: Nicolai Buchwitz Signed-off-by: Florian Fainelli Link: https://patch.msgid.link/20260921220021.281418-3-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 47a6c073c8d9..2ab37bb031ed 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -4135,10 +4135,10 @@ static int bcmgenet_probe(struct platform_device *pdev) priv->rx_rings[i].rx_max_coalesced_frames = 1; /* Initialize u64 stats seq counter for 32bit machines */ - for (i = 0; i <= priv->hw_params->rx_queues; i++) + for (i = 0; i <= GENET_MAX_MQ_CNT; i++) { u64_stats_init(&priv->rx_rings[i].stats64.syncp); - for (i = 0; i <= priv->hw_params->tx_queues; i++) u64_stats_init(&priv->tx_rings[i].stats64.syncp); + } /* libphy will determine the link state */ netif_carrier_off(dev); From cbbc1aee7776c7fa1d89e6cb963a23e58c495dca Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 21 Sep 2026 15:00:19 -0700 Subject: [PATCH 3/5] net: bcmgenet: do not skip WoL power up on GENET V1 bcmgenet_power_up() had an early check for bcmgenet_has_ext(priv) before dispatching by power mode. GENET V1 does not have the EXT block (unlike GENET V2+), which causes bcmgenet_power_up() to immediately return 0. As a consequence, when waking up from GENET_POWER_WOL_MAGIC on GENET V1, bcmgenet_wol_power_up_cfg() is never invoked to disable the WoL clock, clear wake event masks, and restore normal PHY and MAC operations. Move the bcmgenet_has_ext() checks to the GENET_POWER_PASSIVE and GENET_POWER_CABLE_SENSE cases where the EXT registers are actually accessed, allowing GENET_POWER_WOL_MAGIC cleanup to execute on all hardware versions. Fixes: c3ae64ae0c08 ("net: bcmgenet: handle GENET_POWER_WOL_MAGIC") Reviewed-by: Nicolai Buchwitz Signed-off-by: Florian Fainelli Link: https://patch.msgid.link/20260921220021.281418-4-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 2ab37bb031ed..07032e4193ea 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1762,13 +1762,12 @@ static int bcmgenet_power_up(struct bcmgenet_priv *priv, int ret = 0; u32 reg; - if (!bcmgenet_has_ext(priv)) - return ret; - - reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); - switch (mode) { case GENET_POWER_PASSIVE: + if (!bcmgenet_has_ext(priv)) + break; + + reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS | EXT_ENERGY_DET_MASK); if (GENET_IS_V5(priv) && !bcmgenet_has_ephy_16nm(priv)) { @@ -1792,8 +1791,12 @@ static int bcmgenet_power_up(struct bcmgenet_priv *priv, break; case GENET_POWER_CABLE_SENSE: + if (!bcmgenet_has_ext(priv)) + break; + /* enable APD */ if (!GENET_IS_V5(priv)) { + reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); reg |= EXT_PWR_DN_EN_LD; bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); } From 273941c85fc2632cd3e56ddff737b9245de7697d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 21 Sep 2026 15:00:20 -0700 Subject: [PATCH 4/5] net: bcmgenet: validate Ethernet address in bcmgenet_set_mac_addr bcmgenet_set_mac_addr() did not check whether the provided MAC address is a valid Ethernet address before applying it. Userspace could configure an invalid address (such as all zeroes or a multicast address) while the interface is down. Add a call to is_valid_ether_addr() and return -EADDRNOTAVAIL if the MAC address is not valid. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Reviewed-by: Nicolai Buchwitz Signed-off-by: Florian Fainelli Link: https://patch.msgid.link/20260921220021.281418-5-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 07032e4193ea..011376a1678a 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -3635,6 +3635,9 @@ static int bcmgenet_set_mac_addr(struct net_device *dev, void *p) if (netif_running(dev)) return -EBUSY; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + eth_hw_addr_set(dev, addr->sa_data); return 0; From d64e277b955be4506931802837499b62c8f3968a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 21 Sep 2026 15:00:21 -0700 Subject: [PATCH 5/5] net: bcmgenet: mask DMA_TIMEOUT_MASK when reading DMA_RING0_TIMEOUT bcmgenet_get_coalesce() reads DMA_RING0_TIMEOUT to calculate rx_coalesce_usecs without masking out bits outside DMA_TIMEOUT_MASK (16 bits). If upper bits are non-zero or contain status/flags, the computed value of rx_coalesce_usecs returned to userspace via ethtool becomes corrupted. Mask the register read with DMA_TIMEOUT_MASK before computing the timeout in microseconds. Fixes: 4a29645bfe6c ("net: bcmgenet: Implement RX coalescing control knobs") Reviewed-by: Nicolai Buchwitz Signed-off-by: Florian Fainelli Link: https://patch.msgid.link/20260921220021.281418-6-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 011376a1678a..21668e41b696 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -852,7 +852,8 @@ static int bcmgenet_get_coalesce(struct net_device *dev, ec->rx_max_coalesced_frames = bcmgenet_rdma_ring_readl(priv, 0, DMA_MBUF_DONE_THRESH); ec->rx_coalesce_usecs = - bcmgenet_rdma_readl(priv, DMA_RING0_TIMEOUT) * 8192 / 1000; + (bcmgenet_rdma_readl(priv, DMA_RING0_TIMEOUT) & + DMA_TIMEOUT_MASK) * 8192 / 1000; for (i = 0; i <= priv->hw_params->rx_queues; i++) { ring = &priv->rx_rings[i];