diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index ba8c68ae4595..3bb959d16dbf 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -475,7 +475,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
 	u8 val, test_flag, buf[3];
 	int i, ret = -ENODEV; /* error is the most common used retval :| */
 
-	/* If overriden by the user return the user selected type */
+	/* If overridden by the user return the user selected type */
 	if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR &&
 			bank1_types[sensor_addr] <= ABIT_UGURU_NC) {
 		ABIT_UGURU_DEBUG(2, "assuming sensor type %d for bank1 sensor "
@@ -1262,7 +1262,7 @@ static int abituguru_probe(struct platform_device *pdev)
 
 	/*
 	 * El weirdo probe order, to keep the sysfs order identical to the
-	 * BIOS and window-appliction listing order.
+	 * BIOS and window-application listing order.
 	 */
 	static const u8 probe_order[ABIT_UGURU_MAX_BANK1_SENSORS] = {
 		0x00, 0x01, 0x03, 0x04, 0x0A, 0x08, 0x0E, 0x02,
diff --git a/drivers/hwmon/adm1177.c b/drivers/hwmon/adm1177.c
index dc4d8a214d1b..85ad4a3009bd 100644
--- a/drivers/hwmon/adm1177.c
+++ b/drivers/hwmon/adm1177.c
@@ -105,7 +105,7 @@ static int adm1177_read(struct device *dev, enum hwmon_sensor_types type,
 			return ret;
 		dummy = (data[0] << 4) | (data[2] >> 4);
 		/*
-		 * convert to millivolts based on resistor devision
+		 * convert to millivolts based on resistor division
 		 * (V_fullscale / 4096) * raw
 		 */
 		if (st->vrange_high)
diff --git a/drivers/hwmon/adt7x10.c b/drivers/hwmon/adt7x10.c
index d003ee3ebf06..f99d38e82d0b 100644
--- a/drivers/hwmon/adt7x10.c
+++ b/drivers/hwmon/adt7x10.c
@@ -338,7 +338,7 @@ int adt7x10_probe(struct device *dev, const char *name, int irq,
 	data->oldconfig = config;
 
 	/*
-	 * Set to 16 bit resolution, continous conversion and comparator mode.
+	 * Set to 16 bit resolution, continuous conversion and comparator mode.
 	 */
 	data->config = data->oldconfig;
 	data->config &= ~(ADT7X10_MODE_MASK | ADT7X10_CT_POLARITY |
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index 27dc149a3ed9..4adc23ffaf72 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -32,7 +32,7 @@ static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
 #define REG_PRODUCT_ID		0xfd
 #define REG_MFG_ID		0xfe
 
-/* equation 4 from datasheet: rpm = (3932160 * multipler) / count */
+/* equation 4 from datasheet: rpm = (3932160 * multiplier) / count */
 #define FAN_RPM_FACTOR		3932160
 
 /*
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index c56e164d61c1..27ef127ccc2c 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -1445,7 +1445,7 @@ static void lm85_init_client(struct i2c_client *client)
 static int lm85_is_fake(struct i2c_client *client)
 {
 	/*
-	 * Differenciate between real LM96000 and Winbond WPCD377I. The latter
+	 * Differentiate between real LM96000 and Winbond WPCD377I. The latter
 	 * emulate the former except that it has no hardware monitoring function
 	 * so the readings are always 0.
 	 */
diff --git a/drivers/hwmon/pmbus/mp2888.c b/drivers/hwmon/pmbus/mp2888.c
index c5f35daa3fe1..7a2ecffba960 100644
--- a/drivers/hwmon/pmbus/mp2888.c
+++ b/drivers/hwmon/pmbus/mp2888.c
@@ -272,14 +272,14 @@ static int mp2888_write_word_data(struct i2c_client *client, int page, int reg,
 		word = clamp_val(word, 0, GENMASK(7, 0));
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
-		/* Fix limit according to total curent resolution. */
+		/* Fix limit according to total current resolution. */
 		word = data->total_curr_resolution ? DIV_ROUND_CLOSEST(word, 8) :
 		       DIV_ROUND_CLOSEST(word, 4);
 		/* Drop unused bits 15:10. */
 		word = clamp_val(word, 0, GENMASK(9, 0));
 		break;
 	case PMBUS_POUT_OP_WARN_LIMIT:
-		/* Fix limit according to total curent resolution. */
+		/* Fix limit according to total current resolution. */
 		word = data->total_curr_resolution ? DIV_ROUND_CLOSEST(word, 4) :
 		       DIV_ROUND_CLOSEST(word, 2);
 		/* Drop unused bits 15:10. */