mirror of
https://github.com/torvalds/linux.git
synced 2026-05-26 08:02:27 +02:00
ARM: dts: ti: omap: espresso-common: Add common device tree for Samsung Galaxy Tab 2 series
Create common device tree for Samsung Espresso series devices Create a shared device tree for all variants first. Device-specific trees will be added later based on screen size. Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com> Reviewed-by: Andreas Kemnade <andreas@kemnade.info> Link: https://patch.msgid.link/20260303203017.511-6-bavishimithil@gmail.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This commit is contained in:
Mithil Bavishi
Kevin Hilman
parent
bd861514ca
commit
f768d54723
744
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
Normal file
744
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
Normal file
|
|
@ -0,0 +1,744 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/dts-v1/;
|
||||
#include "dt-bindings/gpio/gpio.h"
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "omap443x.dtsi"
|
||||
|
||||
/ {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
continuous_splash: framebuffer@bef00000{
|
||||
reg = <0xbef00000 (1024 * 600 * 4)>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart3;
|
||||
#address-cells = <1>;
|
||||
};
|
||||
|
||||
i2c-gpio5 {
|
||||
compatible = "i2c-gpio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5_pins>;
|
||||
sda-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&gpio4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <10>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* TODO: SMB136 Charger for 7" variant at 0x4d */
|
||||
};
|
||||
|
||||
i2c-gpio6 {
|
||||
compatible = "i2c-gpio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c6_pins>;
|
||||
sda-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&gpio3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <10>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* TODO: STMPE811 ADC at 0x41 */
|
||||
};
|
||||
|
||||
i2c-gpio7 {
|
||||
compatible = "i2c-gpio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c7_pins>;
|
||||
sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <3>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
fuel-gauge@36 {
|
||||
compatible = "maxim,max17042";
|
||||
reg = <0x36>;
|
||||
pinctrl-0 = <&fuel_alert_irq>;
|
||||
pinctrl-names = "default";
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
||||
maxim,rsns-microohm = <10000>;
|
||||
maxim,over-heat-temp = <500>;
|
||||
maxim,dead-volt = <2500>;
|
||||
maxim,over-volt = <4300>;
|
||||
};
|
||||
};
|
||||
|
||||
reg_espresso_wlan: regulator-espresso-wlan {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlanen_gpio>;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "espresso_wlan";
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO_104 */
|
||||
startup-delay-us = <70000>;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
wlan_pwrseq: wlan-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&twl 0>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
reg_espresso_internal: regulator-espresso-internal {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "eMMC_LDO";
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; /* GPIO_63 */
|
||||
startup-delay-us = <100000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_espresso_external: regulator-espresso-external {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmc1";
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; /* GPIO_34 */
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_touch_ldo_en: regulator-touch-ldo-en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "touch_ldo_en";
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* GPIO_54 */
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_keys>;
|
||||
|
||||
key-power {
|
||||
label = "power";
|
||||
|
||||
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; /* GPIO_wk3 */
|
||||
linux,code = <KEY_POWER>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button-volup {
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
label = "volume_up"; /* GPIO_wk30 */
|
||||
gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button-voldown {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
label = "volume_down"; /* GPIO_wk8 */
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
reg_lcd: regulator-lcd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcd_en";
|
||||
gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO_135 */
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pwm10: pwm-10 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm10_default>;
|
||||
compatible = "ti,omap-dmtimer-pwm";
|
||||
#pwm-cells = <3>;
|
||||
ti,timers = <&timer10>;
|
||||
ti,clock-source = <0x00>;
|
||||
};
|
||||
|
||||
lvds-encoder {
|
||||
compatible = "doestek,dtc34lm85am", "lvds-encoder";
|
||||
powerdown-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; /* GPIO_136 */
|
||||
power-supply = <®_lcd>;
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
bridge_in: endpoint {
|
||||
remote-endpoint = <&dpi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
bridge_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vibrator {
|
||||
compatible = "gpio-vibrator";
|
||||
enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; /* GPIO_38 */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vibrator_default>;
|
||||
};
|
||||
|
||||
gp2a_shunt: current-sense-shunt {
|
||||
compatible = "current-sense-shunt";
|
||||
io-channels = <&gpadc 4>;
|
||||
shunt-resistor-micro-ohms = <24000000>; /* 24 ohms */
|
||||
#io-channel-cells = <0>;
|
||||
};
|
||||
|
||||
led-ir {
|
||||
compatible = "gpio-ir-tx";
|
||||
gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* GPIO_59 */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ledir_pins>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap4_pmx_wkup {
|
||||
gpio_keys: gpio-keys-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x046, PIN_INPUT | MUX_MODE3)
|
||||
/* sim_cd.gpio_wk3 - EXT_WAKEUP */
|
||||
OMAP4_IOPAD(0x056, PIN_INPUT | MUX_MODE3)
|
||||
/* fref_clk3_req.gpio_wk30 - VOL_UP */
|
||||
OMAP4_IOPAD(0x05C, PIN_INPUT | MUX_MODE3)
|
||||
/* fref_clk4_out.gpio_wk8 - VOL_DN */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap4_pmx_core {
|
||||
backlight_pins: pinmux-backlight-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0X0D8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)
|
||||
/* usbb1_ulpitll_dat7.gpio_95 - LED_BACKLIGHT_RESET */
|
||||
>;
|
||||
};
|
||||
|
||||
bluetooth_pins: pinmux-bluetooth-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
|
||||
/* gpmc_ncs6.gpio_103 - BT_EN */
|
||||
OMAP4_IOPAD(0x0be, PIN_OUTPUT | MUX_MODE3)
|
||||
/* cam_strobe.gpio_82 - BT_nRST */
|
||||
OMAP4_IOPAD(0x0c0, PIN_INPUT | MUX_MODE3)
|
||||
/* cam_globalreset.gpio_83 - BT_HOST_WAKE */
|
||||
OMAP4_IOPAD(0x0d4, PIN_OUTPUT | MUX_MODE3)
|
||||
/* usbb1_ulpitll_dat5.gpio_93 - BT_WAKE */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_dpi_pins: pinmux-dss-dpi-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x162, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data23 */
|
||||
OMAP4_IOPAD(0x164, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data22 */
|
||||
OMAP4_IOPAD(0x166, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data21 */
|
||||
OMAP4_IOPAD(0x168, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data20 */
|
||||
OMAP4_IOPAD(0x16a, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data19 */
|
||||
OMAP4_IOPAD(0x16c, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data18 */
|
||||
OMAP4_IOPAD(0x16e, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data15 */
|
||||
OMAP4_IOPAD(0x170, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data14 */
|
||||
OMAP4_IOPAD(0x172, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data13 */
|
||||
OMAP4_IOPAD(0x174, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data12 */
|
||||
OMAP4_IOPAD(0x176, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data11 */
|
||||
OMAP4_IOPAD(0x1b4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data10 */
|
||||
OMAP4_IOPAD(0x1b6, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data9 */
|
||||
OMAP4_IOPAD(0x1b8, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data16 */
|
||||
OMAP4_IOPAD(0x1ba, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data17 */
|
||||
OMAP4_IOPAD(0x1bc, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_hsync */
|
||||
OMAP4_IOPAD(0x1be, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_pclk */
|
||||
OMAP4_IOPAD(0x1c0, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_vsync */
|
||||
OMAP4_IOPAD(0x1c2, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_de */
|
||||
OMAP4_IOPAD(0x1c4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data8 */
|
||||
OMAP4_IOPAD(0x1c6, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data7 */
|
||||
OMAP4_IOPAD(0x1c8, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data6 */
|
||||
OMAP4_IOPAD(0x1ca, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data5 */
|
||||
OMAP4_IOPAD(0x1cc, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data4 */
|
||||
OMAP4_IOPAD(0x1ce, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data3 */
|
||||
|
||||
OMAP4_IOPAD(0x1d0, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data2 */
|
||||
OMAP4_IOPAD(0x1d2, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data1 */
|
||||
OMAP4_IOPAD(0x1d4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
|
||||
/* dispc2_data0 */
|
||||
>;
|
||||
};
|
||||
|
||||
fuel_alert_irq: pinmux-fuel-alert-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE3)
|
||||
/* gpmc_a20.gpio_44 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c1_pins: pinmux-i2c1-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* i2c1_scl */
|
||||
OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* i2c1_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c2_pins: pinmux-i2c2-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* i2c2_scl */
|
||||
OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* i2c2_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c3_pins: pinmux-i2c3-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* i2c3_scl */
|
||||
OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* i2c3_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c4_pins: pinmux-i2c4-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* i2c4_scl */
|
||||
OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* i2c4_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c5_pins: pinmux-i2c5-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x0de, PIN_INPUT_PULLUP | MUX_MODE3)
|
||||
/* usbc1_icusb_dp.gpio_98 */
|
||||
OMAP4_IOPAD(0x0e0, PIN_INPUT_PULLUP | MUX_MODE3)
|
||||
/* usbc1_icusb_dm.gpio_99 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c6_pins: pinmux-i2c6-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE3)
|
||||
/* hdmi_ddc_scl.gpio_65 */
|
||||
OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE3)
|
||||
/* hdmi_ddc_sda.gpio_66 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c7_pins: pinmux-i2c7-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x08a, PIN_INPUT_PULLUP | MUX_MODE3)
|
||||
/* gpmc_wait0.gpio_61 */
|
||||
OMAP4_IOPAD(0x08c, PIN_INPUT_PULLUP | MUX_MODE3)
|
||||
/* gpmc_wait1.gpio_62 */
|
||||
>;
|
||||
};
|
||||
|
||||
ledir_pins: pimux-ledir-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x086, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
/* gpmc_nbe0_cle.gpio_59 */
|
||||
OMAP4_IOPAD(0x156, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
/* mcspi4_simo.gpio_152 */
|
||||
>;
|
||||
};
|
||||
|
||||
lvds_pins: pinmux-lvds-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0X136, PIN_OUTPUT | MUX_MODE3)
|
||||
/* mcspi1_simo.gpio_136 - LVDS_nSHDN */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins: pinmux-mmc1-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
||||
/* sdmmc1_clk */
|
||||
OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* sdmcc1_cmd */
|
||||
OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* sdmcc1_dat0 */
|
||||
OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* sdmmc1_dat1 */
|
||||
OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* sdmmc1_dat2 */
|
||||
OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* sdmmc1_dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc2_pins: pinmux-mmc2-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1)
|
||||
/* sdmmc2_dat0 */
|
||||
OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1)
|
||||
/* sdmmc2_dat1 */
|
||||
OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1)
|
||||
/* sdmmc2_dat2 */
|
||||
OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1)
|
||||
/* sdmmc2_dat3 */
|
||||
OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1)
|
||||
/* sdmmc2_dat4 */
|
||||
OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1)
|
||||
/* sdmmc2_dat5 */
|
||||
OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1)
|
||||
/* sdmmc2_dat6 */
|
||||
OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1)
|
||||
/* sdmmc2_dat7 */
|
||||
OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1)
|
||||
/* sdmmc2_clk */
|
||||
OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1)
|
||||
/* sdmmc2_cmd */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc5_pins: pinmux-mmc5-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x148, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
||||
/* sdmmc5_clk.sdmmc5_clk */
|
||||
OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* sdmmc5_cmd.sdmmc5_cmd */
|
||||
OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* sdmmc5_dat0.sdmmc5_dat0 */
|
||||
OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* sdmmc5_dat1.sdmmc5_dat1 */
|
||||
OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* sdmmc5_dat2.sdmmc5_dat2 */
|
||||
OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* sdmmc5_dat3.sdmmc5_dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
pwm10_default: pinmux-pwm10-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0X0D6, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE1)
|
||||
/* usbb1_ulpitll_dat6.dmtimer10_pwm_evt - LED_BACKLIGHT_PWM */
|
||||
>;
|
||||
};
|
||||
|
||||
touch_pins: pinmux-touch-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x06c, PIN_INPUT | MUX_MODE3)
|
||||
/* gpmc_a22.gpio_46 - TSP_INT */
|
||||
>;
|
||||
};
|
||||
|
||||
uart2_pins: pinmux-uart2-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* uart2_cts.uart2_cts */
|
||||
OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* uart2_rts.uart2_rts */
|
||||
OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* uart2_rx.uart2_rx */
|
||||
OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
/* uart2_tx.uart2_tx */
|
||||
>;
|
||||
};
|
||||
|
||||
uart3_pins: pinmux-uart3-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)
|
||||
/* uart3_rx_irrx */
|
||||
OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)
|
||||
/* uart3_tx_irtx */
|
||||
>;
|
||||
};
|
||||
|
||||
vibrator_default: pinmux-vibrator-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x05c, PIN_INPUT_PULLDOWN | MUX_MODE3)
|
||||
/* gpmc_ad14.gpio_38 - MOTOR_EN */
|
||||
>;
|
||||
};
|
||||
|
||||
wlanen_gpio: pinmux-wlanen-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
|
||||
/* gpmc_ncs7.gpio_104 */
|
||||
>;
|
||||
};
|
||||
|
||||
wlan_host_wake: pinmux-wlan-host-wake-pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP4_IOPAD(0x0bc, PIN_INPUT | MUX_MODE3)
|
||||
/* cam_shutter.gpio_81 - WLAN_HOST_WAKE */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins>;
|
||||
|
||||
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
|
||||
&omap4_pmx_core OMAP4_UART3_RX>;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
|
||||
clock-frequency = <400000>;
|
||||
|
||||
twl: pmic@48 {
|
||||
reg = <0x48>;
|
||||
#clock-cells = <1>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&twl6030_pins
|
||||
&twl6030_wkup_pins
|
||||
>;
|
||||
|
||||
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
|
||||
interrupt-parent = <&gic>;
|
||||
system-power-controller;
|
||||
};
|
||||
};
|
||||
|
||||
#include "twl6032.dtsi"
|
||||
#include "twl6030_omap4.dtsi"
|
||||
|
||||
&ldo1 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
&ldo3 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
&ldo4 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&ldo5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&ldo6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
&smps4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&ldousb {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
|
||||
accelerometer@18 {
|
||||
compatible = "bosch,bma254";
|
||||
reg = <0x18>;
|
||||
vdd-supply = <&ldo4>;
|
||||
vddio-supply = <&ldo5>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <25 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>,
|
||||
<26 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
|
||||
};
|
||||
|
||||
magnetometer@2e {
|
||||
compatible = "yamaha,yas530";
|
||||
reg = <0x2e>;
|
||||
vdd-supply = <&ldo4>;
|
||||
iovdd-supply = <&ldo5>;
|
||||
reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <&gpio6 10 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
|
||||
light-sensor@44 {
|
||||
compatible = "sharp,gp2ap002a00f";
|
||||
reg = <0x44>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
||||
vdd-supply = <&ldo4>;
|
||||
vio-supply = <&ldo4>;
|
||||
io-channels = <&gp2a_shunt>;
|
||||
io-channel-names = "alsout";
|
||||
sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
|
||||
sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
|
||||
};
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dss_dpi_pins>;
|
||||
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&bridge_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&twl_usb_comparator {
|
||||
usb-supply = <&ldousb>;
|
||||
};
|
||||
|
||||
&usb_otg_hs {
|
||||
interface-type = <1>;
|
||||
mode = <3>;
|
||||
power = <50>;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
|
||||
vmmc-supply = <®_espresso_external>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_pins>;
|
||||
|
||||
vmmc-supply = <®_espresso_internal>;
|
||||
ti,non-removable;
|
||||
bus-width = <8>;
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mmc4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mmc5 {
|
||||
status = "okay";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
non-removable;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <®_espresso_wlan>;
|
||||
mmc-pwrseq = <&wlan_pwrseq>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc5_pins>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_host_wake>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
|
||||
&omap4_pmx_core OMAP4_UART2_RX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4330-bt";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bluetooth_pins>;
|
||||
shutdown-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
|
||||
device-wakeup-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-names = "host-wakeup";
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user