mirror of
https://github.com/torvalds/linux.git
synced 2026-09-27 11:02:03 +02:00
arm64: dts: rockchip: Add Orange Pi 5 Pro board support
Add device tree for the Xunlong Orange Pi 5 Pro (RK3588S). - eMMC module, you can optionally solder a SPI NOR in place and turn off the eMMC - PCIe-attached NIC (pcie2x1l2) - PCIe NVMe slot (pcie2x1l1) - AP6256 WiFi (BCM43456) via SDIO with mmc-pwrseq - BCM4345C5 Bluetooth - es8388 audio - USB 2.0 and USB 3.0 - HDMI output is enabled - the second HDMI port connected to the DP bridge is left out for a followup set Vendors schematics are available at: https://drive.google.com/file/d/1qs1DratHuh7C6J6MEtQIwUsiSrg8qgTi/view Signed-off-by: Dennis Gilmore <dennis@ausil.us> Reviewed-by: Alexey Charkov <alchark@gmail.com> Link: https://patch.msgid.link/20260511025352.106126-5-dennis@ausil.us Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Dennis Gilmore
Heiko Stuebner
parent
b7a806c1c3
commit
f47af8ebbe
|
|
@ -226,6 +226,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-cm5-base.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-radxa-cm5-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
|
||||
|
|
|
|||
358
arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
Normal file
358
arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
Normal file
|
|
@ -0,0 +1,358 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3588s-orangepi-5.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xunlong Orange Pi 5 Pro";
|
||||
compatible = "xunlong,orangepi-5-pro", "rockchip,rk3588s";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdio;
|
||||
};
|
||||
|
||||
analog-sound {
|
||||
compatible = "simple-audio-card";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_detect>;
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,name = "rockchip,es8388";
|
||||
simple-audio-card,routing =
|
||||
"Headphones", "LOUT1",
|
||||
"Headphones", "ROUT1",
|
||||
"LINPUT1", "Microphone Jack",
|
||||
"RINPUT1", "Microphone Jack",
|
||||
"LINPUT2", "Onboard Microphone",
|
||||
"RINPUT2", "Onboard Microphone";
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Microphone Jack",
|
||||
"Microphone", "Onboard Microphone",
|
||||
"Headphone", "Headphones";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s2_2ch>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&es8388>;
|
||||
system-clock-frequency = <12288000>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm-leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
linux,default-trigger = "heartbeat";
|
||||
max-brightness = <255>;
|
||||
pwms = <&pwm15 0 1000000 0>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_ACTIVITY;
|
||||
linux,default-trigger = "heartbeat";
|
||||
max-brightness = <255>;
|
||||
pwms = <&pwm3 0 1000000 0>;
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
#cooling-cells = <2>;
|
||||
cooling-levels = <0 50 100 150 200 255>;
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
pwms = <&pwm2 0 20000000 0>;
|
||||
};
|
||||
|
||||
vcc3v3_eth: regulator-vcc3v3-eth {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ðernet_en>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_eth";
|
||||
startup-delay-us = <50000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: regulator-vcc5v0-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_otg_en>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-name = "vcc5v0_otg";
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
post-power-on-delay-ms = <200>;
|
||||
reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
typea_con: usb-a-connector {
|
||||
compatible = "usb-a-connector";
|
||||
data-role = "host";
|
||||
label = "USB3 Type-A";
|
||||
power-role = "source";
|
||||
vbus-supply = <&vcc5v0_otg>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1m4_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3m0_xfer>;
|
||||
status = "okay";
|
||||
|
||||
es8388: audio-codec@11 {
|
||||
compatible = "everest,es8388", "everest,es8328";
|
||||
reg = <0x11>;
|
||||
#sound-dai-cells = <0>;
|
||||
AVDD-supply = <&vcca_3v3_s0>;
|
||||
DVDD-supply = <&vcca_1v8_s0>;
|
||||
HPVDD-supply = <&vcca_3v3_s0>;
|
||||
PVDD-supply = <&vcca_1v8_s0>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
assigned-clocks = <&cru I2S2_2CH_MCLKOUT>;
|
||||
clocks = <&cru I2S2_2CH_MCLKOUT>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s2m1_mclk>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4m3_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s2_2ch {
|
||||
pinctrl-0 = <&i2s2m1_lrck &i2s2m1_sclk
|
||||
&i2s2m1_sdi &i2s2m1_sdo>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&package_thermal {
|
||||
polling-delay = <1000>;
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&package_fan0>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map1 {
|
||||
trip = <&package_fan1>;
|
||||
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
|
||||
trips {
|
||||
package_fan0: package-fan0 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <55000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
package_fan1: package-fan1 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <65000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* NVMe */
|
||||
&pcie2x1l1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie30x1m1_1_perstn>, <&pcie30x1m1_1_clkreqn>,
|
||||
<&pcie30x1m1_1_waken>;
|
||||
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
supports-clkreq;
|
||||
vpcie3v3-supply = <&vcc_3v3_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* NIC */
|
||||
&pcie2x1l2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie20x1m0_perstn>, <&pcie20x1m0_clkreqn>,
|
||||
<&pcie20x1m0_waken>;
|
||||
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_eth>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bluetooth {
|
||||
bt_wake_gpio: bt-wake-pin {
|
||||
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_wake_host_irq: bt-wake-host-irq {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet {
|
||||
ethernet_en: ethernet-en {
|
||||
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_otg_en: vcc5v0-otg-en {
|
||||
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
wlan {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
wifi_host_wake_irq: wifi-host-wake-irq {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm15 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm15m2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm2m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm3m2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rk806 {
|
||||
regulators {
|
||||
vcca_1v8_s0: pldo-reg1 {
|
||||
regulator-name = "vcca_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <150000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
no-mmc;
|
||||
no-sd;
|
||||
non-removable;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
|
||||
ap6256: wifi@1 {
|
||||
compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-names = "host-wake";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_irq>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart9 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn &uart9m2_rtsn>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4345c5";
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-names = "host-wakeup";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PC5 IRQ_TYPE_LEVEL_HIGH>;
|
||||
max-speed = <1500000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_wake_host_irq &bt_wake_gpio>;
|
||||
shutdown-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
vbat-supply = <&vcc_3v3_s3>;
|
||||
vddio-supply = <&vcc_1v8_s3>;
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
phy-supply = <&vcc5v0_otg>;
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
/*
|
||||
* The USB3 Type-A host connector is wired to PHY lanes 2/3. Lanes 0/1
|
||||
* are connected to the LT8711UXD DP-to-HDMI bridge on the board.
|
||||
* dp-lane-mux routes USB3 SuperSpeed to the correct lanes.
|
||||
*/
|
||||
rockchip,dp-lane-mux = <0 1>;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user