staging: iio: cdc: ad7152: Replace mlock with a local mutex lock

mlock is intended to protect only switches between modes.
Given this driver doesn't support more than one mode (sysfs polled reads
only), replace mlock with a local mutex lock.

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
sayli karnik 2016-10-10 11:50:48 +05:30 committed by Jonathan Cameron
parent 2296c0623e
commit f08a150847

View File

@ -89,6 +89,7 @@ struct ad7152_chip_info {
*/
u8 filter_rate_setup;
u8 setup[2];
struct mutex state_lock; /* protect hardware state */
};
static inline ssize_t ad7152_start_calib(struct device *dev,
@ -115,10 +116,10 @@ static inline ssize_t ad7152_start_calib(struct device *dev,
else
regval |= AD7152_CONF_CH2EN;
mutex_lock(&indio_dev->mlock);
mutex_lock(&chip->state_lock);
ret = i2c_smbus_write_byte_data(chip->client, AD7152_REG_CFG, regval);
if (ret < 0) {
mutex_unlock(&indio_dev->mlock);
mutex_unlock(&chip->state_lock);
return ret;
}
@ -126,12 +127,12 @@ static inline ssize_t ad7152_start_calib(struct device *dev,
mdelay(20);
ret = i2c_smbus_read_byte_data(chip->client, AD7152_REG_CFG);
if (ret < 0) {
mutex_unlock(&indio_dev->mlock);
mutex_unlock(&chip->state_lock);
return ret;
}
} while ((ret == regval) && timeout--);
mutex_unlock(&indio_dev->mlock);
mutex_unlock(&chip->state_lock);
return len;
}
@ -230,16 +231,16 @@ static int ad7152_write_raw_samp_freq(struct device *dev, int val)
if (i >= ARRAY_SIZE(ad7152_filter_rate_table))
i = ARRAY_SIZE(ad7152_filter_rate_table) - 1;
mutex_lock(&indio_dev->mlock);
mutex_lock(&chip->state_lock);
ret = i2c_smbus_write_byte_data(chip->client,
AD7152_REG_CFG2, AD7152_CFG2_OSR(i));
if (ret < 0) {
mutex_unlock(&indio_dev->mlock);
mutex_unlock(&chip->state_lock);
return ret;
}
chip->filter_rate_setup = i;
mutex_unlock(&indio_dev->mlock);
mutex_unlock(&chip->state_lock);
return ret;
}
@ -252,7 +253,7 @@ static int ad7152_write_raw(struct iio_dev *indio_dev,
struct ad7152_chip_info *chip = iio_priv(indio_dev);
int ret, i;
mutex_lock(&indio_dev->mlock);
mutex_lock(&chip->state_lock);
switch (mask) {
case IIO_CHAN_INFO_CALIBSCALE:
@ -321,7 +322,7 @@ static int ad7152_write_raw(struct iio_dev *indio_dev,
}
out:
mutex_unlock(&indio_dev->mlock);
mutex_unlock(&chip->state_lock);
return ret;
}
@ -334,7 +335,7 @@ static int ad7152_read_raw(struct iio_dev *indio_dev,
int ret;
u8 regval = 0;
mutex_lock(&indio_dev->mlock);
mutex_lock(&chip->state_lock);
switch (mask) {
case IIO_CHAN_INFO_RAW:
@ -422,7 +423,7 @@ static int ad7152_read_raw(struct iio_dev *indio_dev,
ret = -EINVAL;
}
out:
mutex_unlock(&indio_dev->mlock);
mutex_unlock(&chip->state_lock);
return ret;
}
@ -509,6 +510,7 @@ static int ad7152_probe(struct i2c_client *client,
i2c_set_clientdata(client, indio_dev);
chip->client = client;
mutex_init(&chip->state_lock);
/* Establish that the iio_dev is a child of the i2c device */
indio_dev->name = id->name;