mirror of
https://github.com/torvalds/linux.git
synced 2026-05-22 14:12:07 +02:00
Merge branch 'dt/linus' into dt/next
Pull in the binding fixes so we don't have all the warnings.
This commit is contained in:
Rob Herring
commit
ef314d213d
|
|
@ -26,6 +26,6 @@ Description: Read/write the current state of DDR Backup Mode, which controls
|
|||
DDR Backup Mode must be explicitly enabled by the user,
|
||||
to invoke step 1.
|
||||
|
||||
See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt.
|
||||
See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml.
|
||||
Users: User space applications for embedded boards equipped with a
|
||||
BD9571MWV PMIC.
|
||||
|
|
|
|||
|
|
@ -45,7 +45,7 @@ description: |
|
|||
The case where SH and SP are both 1 is likely not very interesting.
|
||||
|
||||
maintainers:
|
||||
- Luca Ceresoli <luca@lucaceresoli.net>
|
||||
- Luca Ceresoli <luca.ceresoli@bootlin.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node.
|
|||
firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
|
||||
Adaptive Voltage Scaling.
|
||||
|
||||
[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
|
||||
[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
|
||||
|
||||
|
||||
Node brcm,avs-cpu-data-mem
|
||||
|
|
|
|||
|
|
@ -71,11 +71,6 @@ properties:
|
|||
- description: number of output lines for the green channel (G)
|
||||
- description: number of output lines for the blue channel (B)
|
||||
|
||||
arm,malidp-arqos-high-level:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
integer describing the ARQoS levels of DP500's QoS signaling
|
||||
|
||||
arm,malidp-arqos-value:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
|
|
@ -113,7 +108,7 @@ examples:
|
|||
clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
|
||||
clock-names = "pxlclk", "mclk", "aclk", "pclk";
|
||||
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
|
||||
arm,malidp-arqos-high-level = <0xd000d000>;
|
||||
arm,malidp-arqos-value = <0xd000d000>;
|
||||
|
||||
port {
|
||||
dp0_output: endpoint {
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Qualcomm Display DPU dt properties for SC7180 target
|
||||
|
||||
maintainers:
|
||||
- Krishna Manikandan <mkrishn@codeaurora.org>
|
||||
- Krishna Manikandan <quic_mkrishn@quicinc.com>
|
||||
|
||||
description: |
|
||||
Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Qualcomm Display DPU dt properties for SC7280
|
||||
|
||||
maintainers:
|
||||
- Krishna Manikandan <mkrishn@codeaurora.org>
|
||||
- Krishna Manikandan <quic_mkrishn@quicinc.com>
|
||||
|
||||
description: |
|
||||
Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Qualcomm Display DPU dt properties for SDM845 target
|
||||
|
||||
maintainers:
|
||||
- Krishna Manikandan <mkrishn@codeaurora.org>
|
||||
- Krishna Manikandan <quic_mkrishn@quicinc.com>
|
||||
|
||||
description: |
|
||||
Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Qualcomm Display DSI controller
|
||||
|
||||
maintainers:
|
||||
- Krishna Manikandan <mkrishn@codeaurora.org>
|
||||
- Krishna Manikandan <quic_mkrishn@quicinc.com>
|
||||
|
||||
allOf:
|
||||
- $ref: "../dsi-controller.yaml#"
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Qualcomm Display DSI 10nm PHY
|
||||
|
||||
maintainers:
|
||||
- Krishna Manikandan <mkrishn@codeaurora.org>
|
||||
- Krishna Manikandan <quic_mkrishn@quicinc.com>
|
||||
|
||||
allOf:
|
||||
- $ref: dsi-phy-common.yaml#
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Qualcomm Display DSI 14nm PHY
|
||||
|
||||
maintainers:
|
||||
- Krishna Manikandan <mkrishn@codeaurora.org>
|
||||
- Krishna Manikandan <quic_mkrishn@quicinc.com>
|
||||
|
||||
allOf:
|
||||
- $ref: dsi-phy-common.yaml#
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Qualcomm Display DSI 20nm PHY
|
||||
|
||||
maintainers:
|
||||
- Krishna Manikandan <mkrishn@codeaurora.org>
|
||||
- Krishna Manikandan <quic_mkrishn@quicinc.com>
|
||||
|
||||
allOf:
|
||||
- $ref: dsi-phy-common.yaml#
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Qualcomm Display DSI 28nm PHY
|
||||
|
||||
maintainers:
|
||||
- Krishna Manikandan <mkrishn@codeaurora.org>
|
||||
- Krishna Manikandan <quic_mkrishn@quicinc.com>
|
||||
|
||||
allOf:
|
||||
- $ref: dsi-phy-common.yaml#
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Description of Qualcomm Display DSI PHY common dt properties
|
||||
|
||||
maintainers:
|
||||
- Krishna Manikandan <mkrishn@codeaurora.org>
|
||||
- Krishna Manikandan <quic_mkrishn@quicinc.com>
|
||||
|
||||
description: |
|
||||
This defines the DSI PHY dt properties which are common for all
|
||||
|
|
|
|||
|
|
@ -9,7 +9,7 @@ Requires node properties:
|
|||
"arm,vexpress-power"
|
||||
"arm,vexpress-energy"
|
||||
- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
|
||||
(see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
|
||||
(see Documentation/devicetree/bindings/arm/vexpress-config.yaml
|
||||
for more details)
|
||||
|
||||
Optional node properties:
|
||||
|
|
|
|||
|
|
@ -150,7 +150,6 @@ allOf:
|
|||
description: 5 memory controller channels and 1 for stream-id registers
|
||||
|
||||
reg-names:
|
||||
maxItems: 6
|
||||
items:
|
||||
- const: sid
|
||||
- const: broadcast
|
||||
|
|
@ -170,7 +169,6 @@ allOf:
|
|||
description: 17 memory controller channels and 1 for stream-id registers
|
||||
|
||||
reg-names:
|
||||
minItems: 18
|
||||
items:
|
||||
- const: sid
|
||||
- const: broadcast
|
||||
|
|
@ -202,7 +200,6 @@ allOf:
|
|||
description: 17 memory controller channels and 1 for stream-id registers
|
||||
|
||||
reg-names:
|
||||
minItems: 18
|
||||
items:
|
||||
- const: sid
|
||||
- const: broadcast
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated.
|
||||
|
||||
maintainers:
|
||||
- Luca Ceresoli <luca@lucaceresoli.net>
|
||||
- Luca Ceresoli <luca.ceresoli@bootlin.com>
|
||||
|
||||
description: |
|
||||
MAX77714 is a Power Management IC with 4 buck regulators, 9
|
||||
|
|
|
|||
|
|
@ -145,7 +145,6 @@ allOf:
|
|||
items:
|
||||
- description: Xenon IP registers
|
||||
- description: Armada 3700 SoC PHY PAD Voltage Control register
|
||||
minItems: 2
|
||||
|
||||
marvell,pad-type:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
|
|
|
|||
|
|
@ -55,7 +55,6 @@ properties:
|
|||
maxItems: 1
|
||||
|
||||
apple,sart:
|
||||
maxItems: 1
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description: |
|
||||
Reference to the SART address filter.
|
||||
|
|
|
|||
|
|
@ -9,7 +9,7 @@ Required properties:
|
|||
- resets : list of phandle and reset specifier pairs. There should be two entries, one
|
||||
for the whole phy and one for the port
|
||||
- reset-names : list of reset signal names. Should be "global" and "port"
|
||||
See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
|
||||
See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
|
||||
See: Documentation/devicetree/bindings/reset/reset.txt
|
||||
|
||||
Example:
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
|||
title: Qualcomm QMP USB3 DP PHY controller
|
||||
|
||||
maintainers:
|
||||
- Manu Gautam <mgautam@codeaurora.org>
|
||||
- Wesley Cheng <quic_wcheng@quicinc.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
|||
title: Qualcomm QUSB2 phy controller
|
||||
|
||||
maintainers:
|
||||
- Manu Gautam <mgautam@codeaurora.org>
|
||||
- Wesley Cheng <quic_wcheng@quicinc.com>
|
||||
|
||||
description:
|
||||
QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
|||
title: Qualcomm Synopsys Femto High-Speed USB PHY V2
|
||||
|
||||
maintainers:
|
||||
- Wesley Cheng <wcheng@codeaurora.org>
|
||||
- Wesley Cheng <quic_wcheng@quicinc.com>
|
||||
|
||||
description: |
|
||||
Qualcomm High-Speed USB PHY
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ Required properties:
|
|||
- pins: List of pins. Valid values of pins properties are: gpio0, gpio1.
|
||||
|
||||
First 2 properties must be added in the RK805 PMIC node, documented in
|
||||
Documentation/devicetree/bindings/mfd/rk808.txt
|
||||
Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
|
||||
|
||||
Optional properties:
|
||||
-------------------
|
||||
|
|
|
|||
|
|
@ -32,31 +32,37 @@ patternProperties:
|
|||
groups:
|
||||
description: The pin group to select.
|
||||
enum: [
|
||||
# common
|
||||
i2c, spi, wdt,
|
||||
|
||||
# For MT7620 SoC
|
||||
ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk,
|
||||
uartf, uartlite, wdt, wled,
|
||||
ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk,
|
||||
uartf, uartlite, wled,
|
||||
|
||||
# For MT7628 and MT7688 SoCs
|
||||
gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
|
||||
gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
|
||||
p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0,
|
||||
pwm1, refclk, sdmode, spi, spi cs1, spis, uart0, uart1, uart2,
|
||||
wdt, wled_an, wled_kn,
|
||||
pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2,
|
||||
wled_an, wled_kn,
|
||||
]
|
||||
|
||||
function:
|
||||
description: The mux function to select.
|
||||
enum: [
|
||||
# common
|
||||
gpio, i2c, refclk, spi,
|
||||
|
||||
# For MT7620 SoC
|
||||
ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa,
|
||||
pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, refclk,
|
||||
rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, wdt refclk,
|
||||
ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa,
|
||||
pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf,
|
||||
rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk,
|
||||
wdt rst, wled,
|
||||
|
||||
# For MT7628 and MT7688 SoCs
|
||||
antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn,
|
||||
antenna, debug, i2s, jtag, p0led_an, p0led_kn,
|
||||
p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn,
|
||||
p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2,
|
||||
refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1,
|
||||
rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1,
|
||||
spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -,
|
||||
]
|
||||
|
||||
|
|
|
|||
|
|
@ -33,32 +33,29 @@ patternProperties:
|
|||
groups:
|
||||
description: The pin group to select.
|
||||
enum: [
|
||||
# common
|
||||
i2c, jtag, led, mdio, rgmii, spi, spi_cs1, uartf, uartlite,
|
||||
|
||||
# For RT3050, RT3052 and RT3350 SoCs
|
||||
i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite,
|
||||
sdram,
|
||||
|
||||
# For RT3352 SoC
|
||||
i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf,
|
||||
uartlite,
|
||||
|
||||
# For RT5350 SoC
|
||||
i2c, jtag, led, spi, spi_cs1, uartf, uartlite,
|
||||
lna, pa
|
||||
]
|
||||
|
||||
function:
|
||||
description: The mux function to select.
|
||||
enum: [
|
||||
# For RT3050, RT3052 and RT3350 SoCs
|
||||
gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio,
|
||||
pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, uartlite,
|
||||
|
||||
# For RT3352 SoC
|
||||
gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio,
|
||||
pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf,
|
||||
# common
|
||||
gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, mdio,
|
||||
pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf,
|
||||
uartlite, wdg_cs1,
|
||||
|
||||
# For RT5350 SoC
|
||||
gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio,
|
||||
pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite, wdg_cs1,
|
||||
# For RT3050, RT3052 and RT3350 SoCs
|
||||
sdram,
|
||||
|
||||
# For RT3352 SoC
|
||||
lna, pa
|
||||
]
|
||||
|
||||
required:
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Maxim Integrated MAX77976 Battery charger
|
||||
|
||||
maintainers:
|
||||
- Luca Ceresoli <luca@lucaceresoli.net>
|
||||
- Luca Ceresoli <luca.ceresoli@bootlin.com>
|
||||
|
||||
description: |
|
||||
The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: The Qualcomm PMIC VBUS output regulator driver
|
||||
|
||||
maintainers:
|
||||
- Wesley Cheng <wcheng@codeaurora.org>
|
||||
- Wesley Cheng <quic_wcheng@quicinc.com>
|
||||
|
||||
description: |
|
||||
This regulator driver controls the VBUS output by the Qualcomm PMIC. This
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@ Versatile Express voltage regulators
|
|||
Requires node properties:
|
||||
- "compatible" value: "arm,vexpress-volt"
|
||||
- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
|
||||
(see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
|
||||
(see Documentation/devicetree/bindings/arm/vexpress-config.yaml
|
||||
for more details)
|
||||
|
||||
Required regulator properties:
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@ Required properties:
|
|||
- resets : list of phandle and reset specifier pairs. There should be two entries, one
|
||||
for the powerdown and softreset lines of the usb3 IP
|
||||
- reset-names : list of reset signal names. Names should be "powerdown" and "softreset"
|
||||
See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
|
||||
See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
|
||||
See: Documentation/devicetree/bindings/reset/reset.txt
|
||||
|
||||
- #address-cells, #size-cells : should be '1' if the device has sub-nodes
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|||
- resets : phandle + reset specifier pairs to the powerdown and softreset lines
|
||||
of the USB IP
|
||||
- reset-names : should be "power" and "softreset"
|
||||
See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
|
||||
See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
|
||||
See: Documentation/devicetree/bindings/reset/reset.txt
|
||||
|
||||
Example:
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|||
|
||||
- resets : phandle to the powerdown and reset controller for the USB IP
|
||||
- reset-names : should be "power" and "softreset".
|
||||
See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
|
||||
See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
|
||||
See: Documentation/devicetree/bindings/reset/reset.txt
|
||||
|
||||
Example:
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Qualcomm SuperSpeed DWC3 USB SoC controller
|
||||
|
||||
maintainers:
|
||||
- Manu Gautam <mgautam@codeaurora.org>
|
||||
- Wesley Cheng <quic_wcheng@quicinc.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
|
|
@ -145,6 +145,9 @@ patternProperties:
|
|||
description: ASRock Inc.
|
||||
"^asus,.*":
|
||||
description: AsusTek Computer Inc.
|
||||
"^atheros,.*":
|
||||
description: Qualcomm Atheros, Inc. (deprecated, use qca)
|
||||
deprecated: true
|
||||
"^atlas,.*":
|
||||
description: Atlas Scientific LLC
|
||||
"^atmel,.*":
|
||||
|
|
|
|||
|
|
@ -64,7 +64,6 @@ if:
|
|||
then:
|
||||
properties:
|
||||
clocks:
|
||||
minItems: 2
|
||||
items:
|
||||
- description: High-frequency oscillator input, divided internally
|
||||
- description: Low-frequency oscillator input
|
||||
|
|
|
|||
12
MAINTAINERS
12
MAINTAINERS
|
|
@ -1507,7 +1507,7 @@ F: drivers/clocksource/arm_arch_timer.c
|
|||
ARM HDLCD DRM DRIVER
|
||||
M: Liviu Dudau <liviu.dudau@arm.com>
|
||||
S: Supported
|
||||
F: Documentation/devicetree/bindings/display/arm,hdlcd.txt
|
||||
F: Documentation/devicetree/bindings/display/arm,hdlcd.yaml
|
||||
F: drivers/gpu/drm/arm/hdlcd_*
|
||||
|
||||
ARM INTEGRATOR, VERSATILE AND REALVIEW SUPPORT
|
||||
|
|
@ -1542,7 +1542,7 @@ M: Mihail Atanassov <mihail.atanassov@arm.com>
|
|||
L: Mali DP Maintainers <malidp@foss.arm.com>
|
||||
S: Supported
|
||||
T: git git://anongit.freedesktop.org/drm/drm-misc
|
||||
F: Documentation/devicetree/bindings/display/arm,komeda.txt
|
||||
F: Documentation/devicetree/bindings/display/arm,komeda.yaml
|
||||
F: Documentation/gpu/komeda-kms.rst
|
||||
F: drivers/gpu/drm/arm/display/include/
|
||||
F: drivers/gpu/drm/arm/display/komeda/
|
||||
|
|
@ -1564,7 +1564,7 @@ M: Brian Starkey <brian.starkey@arm.com>
|
|||
L: Mali DP Maintainers <malidp@foss.arm.com>
|
||||
S: Supported
|
||||
T: git git://anongit.freedesktop.org/drm/drm-misc
|
||||
F: Documentation/devicetree/bindings/display/arm,malidp.txt
|
||||
F: Documentation/devicetree/bindings/display/arm,malidp.yaml
|
||||
F: Documentation/gpu/afbc.rst
|
||||
F: drivers/gpu/drm/arm/
|
||||
|
||||
|
|
@ -2009,7 +2009,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
|||
S: Maintained
|
||||
T: git git://github.com/ulli-kroll/linux.git
|
||||
F: Documentation/devicetree/bindings/arm/gemini.yaml
|
||||
F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
|
||||
F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
|
||||
F: Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
|
||||
F: Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
|
||||
F: arch/arm/boot/dts/gemini*
|
||||
|
|
@ -6078,7 +6078,7 @@ M: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|||
L: linux-media@vger.kernel.org
|
||||
S: Maintained
|
||||
T: git git://linuxtv.org/media_tree.git
|
||||
F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
|
||||
F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
|
||||
F: drivers/media/i2c/dw9807-vcm.c
|
||||
|
||||
DOUBLETALK DRIVER
|
||||
|
|
@ -19220,7 +19220,7 @@ F: arch/arc/plat-axs10x
|
|||
SYNOPSYS AXS10x RESET CONTROLLER DRIVER
|
||||
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
|
||||
S: Supported
|
||||
F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
|
||||
F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml
|
||||
F: drivers/reset/reset-axs10x.c
|
||||
|
||||
SYNOPSYS CREG GPIO DRIVER
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user